Installation MAGEIA Asus

Installation MAGEIA Asus [Réglé]

ASUS T100TA Système et matériels / Installation et configuration

Guygoye Membre non connecté

Modérateur Forgeron

Le 26/05/2019 à 15h56

#252910

Salut,

désolé pour l'attente j'ai eu un petit soucis et je n'ai pas pu m'y remettre avant maintenant!

Code BASH :

+ hash xinput
+ '[' 0 -ne 0 ']'
+ hash xrandr
+ '[' 0 -ne 0 ']'
+ grep -a ./rotate.sh /proc/sched_debug
+ '[' 1 -eq 0 ']'
+ T_Matrix_normal=' 1  0  0  0  1  0  0  0  1'
+ T_Matrix_left=' 0 -1  1  1  0  0  0  0  1'
+ T_Matrix_inverte='-1  0  1  0 -1  1  0  0  1'
+ T_Matrix_right=' 0  1  0 -1  0  1  0  0  1'
+ sNormal=normal
+ sLeft=left
+ sRight=right
+ sInverted=interved
+ vNormal=0
+ vLeft=1
+ vRight=3
+ vInverted=2
+ normal=normal
+ left=left
+ right=right
+ inverted=interved
+ shopt -s extglob
+ device1='Virtual core XTEST pointer'
+ device2='Asus TouchPad'
+ device3='SIS0817:00 0457:1071'
+ screen=DSI1
+ period=1
++ xinput list
+ pointers='⎡ Virtual core pointer                        id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                  id=4    [slave  pointer  (2)]
⎜   ↳ xwayland-pointer:16                         id=6    [slave  pointer  (2)]
⎜   ↳ xwayland-relative-pointer:16                id=7    [slave  pointer  (2)]
⎜   ↳ xwayland-touch:16                           id=9    [slave  pointer  (2)]
⎣ Virtual core keyboard                       id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                 id=5    [slave  keyboard (3)]
    ↳ xwayland-keyboard:16                        id=8    [slave  keyboard (3)]'
+ xinputs=
++ echo '⎡ Virtual core pointer                        id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                  id=4    [slave  pointer  (2)]
⎜   ↳ xwayland-pointer:16                         id=6    [slave  pointer  (2)]
⎜   ↳ xwayland-relative-pointer:16                id=7    [slave  pointer  (2)]
⎜   ↳ xwayland-touch:16                           id=9    [slave  pointer  (2)]
⎣ Virtual core keyboard                       id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                 id=5    [slave  keyboard (3)]
    ↳ xwayland-keyboard:16                        id=8    [slave  keyboard (3)]'
++ grep 'Virtual core XTEST pointer'
++ sed 's/.*id=\([[:digit:]]*\).*/\1/'
++ tr '\n' ' '
+ xinputs=' 4 '
++ echo '⎡ Virtual core pointer                        id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                  id=4    [slave  pointer  (2)]
⎜   ↳ xwayland-pointer:16                         id=6    [slave  pointer  (2)]
⎜   ↳ xwayland-relative-pointer:16                id=7    [slave  pointer  (2)]
⎜   ↳ xwayland-touch:16                           id=9    [slave  pointer  (2)]
⎣ Virtual core keyboard                       id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                 id=5    [slave  keyboard (3)]
    ↳ xwayland-keyboard:16                        id=8    [slave  keyboard (3)]'
++ grep 'Asus TouchPad'
++ tr '\n' ' '
++ sed 's/.*id=\([[:digit:]]*\).*/\1/'
+ xinputs=' 4  '
++ echo '⎡ Virtual core pointer                        id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                  id=4    [slave  pointer  (2)]
⎜   ↳ xwayland-pointer:16                         id=6    [slave  pointer  (2)]
⎜   ↳ xwayland-relative-pointer:16                id=7    [slave  pointer  (2)]
⎜   ↳ xwayland-touch:16                           id=9    [slave  pointer  (2)]
⎣ Virtual core keyboard                       id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                 id=5    [slave  keyboard (3)]
    ↳ xwayland-keyboard:16                        id=8    [slave  keyboard (3)]'
++ grep 'SIS0817:00 0457:1071'
++ sed 's/.*id=\([[:digit:]]*\).*/\1/'
++ tr '\n' ' '
+ xinputs=' 4   '
+ true
+ locked=0
+ '[' 0 -eq 0 ']'
++ xrandr --verbose
++ sed -e 's/.*) \([[:alpha:]]*\) (.*/\1/'
++ grep DSI1
+ currentOrientation=
+ case ${currentOrientation} in
+ echo bug.
bug.
++ cat /sys/bus/iio/devices/iio:device0/in_accel_x_raw
+ x=367
++ cat /sys/bus/iio/devices/iio:device0/in_accel_y_raw
+ y=14328
++ cat /sys/bus/iio/devices/iio:device0/in_accel_z_raw
+ z=-7789
+ nextRotation=normal
+ '[' 367 -le 0 ']'
+ '[' 367 -ge 0 ']'
+ case $x in
+ '[' normal = normal ']'
+ case $y in
+ '[' normal '!=' ']'
./rotate.sh: ligne 152 : [: normal : opérateur unaire attendu
+ sleep 1
+ true
+ locked=0
+ '[' 0 -eq 0 ']'
++ xrandr --verbose
++ grep DSI1
++ sed -e 's/.*) \([[:alpha:]]*\) (.*/\1/'
+ currentOrientation=
+ case ${currentOrientation} in
+ echo bug.
bug.
++ cat /sys/bus/iio/devices/iio:device0/in_accel_x_raw
+ x=10741
++ cat /sys/bus/iio/devices/iio:device0/in_accel_y_raw
+ y=9469
++ cat /sys/bus/iio/devices/iio:device0/in_accel_z_raw
+ z=-4022
+ nextRotation=normal
+ '[' 10741 -le 0 ']'
+ '[' 10741 -ge 0 ']'
+ case $x in
+ nextRotation=left
+ '[' left = normal ']'
+ '[' left '!=' ']'
./rotate.sh: ligne 152 : [: left : opérateur unaire attendu
+ sleep 1
+ true
+ locked=0
+ '[' 0 -eq 0 ']'
++ xrandr --verbose
++ grep DSI1
++ sed -e 's/.*) \([[:alpha:]]*\) (.*/\1/'
+ currentOrientation=
+ case ${currentOrientation} in
+ echo bug.
bug.
++ cat /sys/bus/iio/devices/iio:device0/in_accel_x_raw
+ x=12863
++ cat /sys/bus/iio/devices/iio:device0/in_accel_y_raw
+ y=12287
++ cat /sys/bus/iio/devices/iio:device0/in_accel_z_raw
+ z=-2472
+ nextRotation=normal
+ '[' 12863 -le 0 ']'
+ '[' 12863 -ge 0 ']'
+ case $x in
+ nextRotation=left
+ '[' left = normal ']'
+ '[' left '!=' ']'
./rotate.sh: ligne 152 : [: left : opérateur unaire attendu
+ sleep 1
+ true
+ locked=0
+ '[' 0 -eq 0 ']'
++ xrandr --verbose
++ grep DSI1
++ sed -e 's/.*) \([[:alpha:]]*\) (.*/\1/'
+ currentOrientation=
+ case ${currentOrientation} in
+ echo bug.
bug.
++ cat /sys/bus/iio/devices/iio:device0/in_accel_x_raw
+ x=387
++ cat /sys/bus/iio/devices/iio:device0/in_accel_y_raw
+ y=15724
++ cat /sys/bus/iio/devices/iio:device0/in_accel_z_raw
+ z=-3954
+ nextRotation=normal
+ '[' 387 -le 0 ']'
+ '[' 387 -ge 0 ']'
+ case $x in
+ '[' normal = normal ']'
+ case $y in
+ '[' normal '!=' ']'
./rotate.sh: ligne 152 : [: normal : opérateur unaire attendu
+ sleep 1
+ true
+ locked=0
+ '[' 0 -eq 0 ']'
++ xrandr --verbose
++ grep DSI1
++ sed -e 's/.*) \([[:alpha:]]*\) (.*/\1/'
+ currentOrientation=
+ case ${currentOrientation} in
+ echo bug.
bug.
++ cat /sys/bus/iio/devices/iio:device0/in_accel_x_raw
+ x=539
++ cat /sys/bus/iio/devices/iio:device0/in_accel_y_raw
+ y=14131
++ cat /sys/bus/iio/devices/iio:device0/in_accel_z_raw
+ z=-7878
+ nextRotation=normal
+ '[' 539 -le 0 ']'
+ '[' 539 -ge 0 ']'
+ case $x in
+ '[' normal = normal ']'
+ case $y in
+ '[' normal '!=' ']'
./rotate.sh: ligne 152 : [: normal : opérateur unaire attendu
+ sleep 1

J'ai l'impression que ça marche car la position est bien pris en compte. Est ce que ça vient du passage de KDE à GNOME et que l'affichage n'est pas géré pareil?

Édité par Guygoye Le 26/05/2019 à 15h59

Jybz Membre non connecté

Administrateur Forgeron

Le 26/05/2019 à 19h08

#252935

Ouais ça confirme bien ce que je pense. Ton écran a été renommé avec Wayland ! ^^

Code BASH :

#!/bin/bash -x
 
# Review 2019-04-19 by Jean-Baptiste Biernacki
## Review 2016-01-03 by John Wells
## https://github.com/jfwells/linux-asus-t100ta/blob/master/support-scripts/rotate.sh
### Based 2010-10-26 on an original by Maxwell Pray (synthead), from
### https://bbs.archlinux.org/viewtopic.php?id=107167
 
#For information :
#xinput list
#⎡ Virtual core pointer                          id=2    [master pointer  (3)]
#⎜   ↳ Virtual core XTEST pointer                id=4    [slave  pointer  (2)]
#⎜   ↳ Asus TouchPad                             id=11   [slave  pointer  (2)]
#⎜   ↳ SIS0817:00 0457:1071                      id=13   [slave  pointer  (2)]
#⎣ Virtual core keyboard                         id=3    [master keyboard (2)]
#    ↳ Virtual core XTEST keyboard               id=5    [slave  keyboard (3)]
#    ↳ Asus Wireless Radio Control               id=6    [slave  keyboard (3)]
#    ↳ Video Bus                                 id=7    [slave  keyboard (3)]
#    ↳ Sleep Button                              id=8    [slave  keyboard (3)]
#    ↳ Asus Keyboard                             id=9    [slave  keyboard (3)]
#    ↳ Asus Keyboard                             id=10   [slave  keyboard (3)]
#    ↳ bytcr-rt5640 Headset                      id=12   [slave  keyboard (3)]
#    ↳ Asus WMI hotkeys                          id=14   [slave  keyboard (3)]
#    ↳ gpio-keys                                 id=15   [slave  keyboard (3)]
 
#Check dependencies :
hash xinput 2>/dev/null
if [ ${?} -ne 0 ]; then
    echo "Install xinput first."
    exit
fi
hash xrandr 2>/dev/null
if [ ${?} -ne 0 ]; then
    echo "Install xrandr first."
    exit
fi
grep -a $0 /proc/sched_debug 2>/dev/null
if [ ${?} -eq 0 ]; then
    echo "The script is already running!"
    exit
fi
 
#Normal transformation matrix
# 1  0  0
# 0  1  0
# 0  0  1
T_Matrix_normal=" 1  0  0  0  1  0  0  0  1"
#Left transformation matrix
# 0 -1  1
# 1  0  0
# 0  0  1
T_Matrix_left=" 0 -1  1  1  0  0  0  0  1"
#Inverted transformation matrix
#-1  0  1
# 0 -1  1
# 0  0  1
T_Matrix_inverted="-1  0  1  0 -1  1  0  0  1"
#Right transformation matrix
# 0  1  0
#-1  0  1
# 0  0  1
T_Matrix_right=" 0  1  0 -1  0  1  0  0  1"
#Set default matrix
T_Matrix=${T_Matrix_normal}
#variables
sNormal="normal"
sLeft="left"
sRight="right"
sInverted="inverted"
vNormal=0
vLeft=1
vRight=3
vInverted=2
#Change s[[:alpha:]] to v[[:alpha:]] for switching from string to value :
normal=${sNormal}
left=${sLeft}
right=${sRight}
inverted=${sInverted}
shopt -s extglob
 
#List of input devices to rotate :
#For the full available list, type : $ xinput list
device1="Virtual core XTEST pointer"
device2="Asus TouchPad"
device3="SIS0817:00 0457:1071"
#device4="bytcr-rt5640 Headset"
#device5=""
 
#The screen to rotate :
#To know which screen is to rotate, type : $ xrandr | grep " connected" | sed "s/^\([[:alnum:]]*\)[[:space:]].*/\1/"
#screen="DSI1"
screen="$(xrandr | grep -m 1 "connected" | cut -d ' ' -f 1)"
 
#Time between two loops
period=1
 
pointers="$(xinput list)"
xinputs=""
xinputs="${xinputs} $(echo "${pointers}" | grep "${device1}" | sed 's/.*id=\([[:digit:]]*\).*/\1/' | tr '\n' ' ')"
xinputs="${xinputs} $(echo "${pointers}" | grep "${device2}" | sed 's/.*id=\([[:digit:]]*\).*/\1/' | tr '\n' ' ')"
xinputs="${xinputs} $(echo "${pointers}" | grep "${device3}" | sed 's/.*id=\([[:digit:]]*\).*/\1/' | tr '\n' ' ')"
#xinputs="${xinputs} $(echo ${pointers} | grep "${device4}" | sed 's/.*id=\([[:digit:]]*\).*/\1/g' | tr '\n' ' ')"
 
#Set default setting for locked orientation:
#Not implemented.
#lockFile="/tmp/lockedOrientation"
#echo "0" > ${lockFile}
 
while true; do
    #Check if rotation is locked.
    #Not implemented.
    locked=0
    #locked=$(cat ${lockFile})
    if [ ${locked} -eq 0 ]; then
 
        #Get current orientation set
        currentOrientation=$(xrandr --verbose | grep ${screen} | sed -e "s/.*) \([[:alpha:]]*\) (.*/\1/")
        case ${currentOrientation} in
            ${sNormal}   ) currentOrientation="${normal}"  ;;
            ${sLeft}     ) currentOrientation="${left}"    ;;
            ${sInverted} ) currentOrientation="${inverted}";;
            ${sRight}    ) currentOrientation="${right}"   ;;
            *            ) echo "bug.";;
        esac
 
        #Get data from accelerometer
        x=$(cat /sys/bus/iio/devices/iio\:device0/in_accel_x_raw)
        y=$(cat /sys/bus/iio/devices/iio\:device0/in_accel_y_raw)
        z=$(cat /sys/bus/iio/devices/iio\:device0/in_accel_z_raw)
 
        nextRotation="${normal}"
 
        if [ $x -le 0 ]; then
            case $x in
                -???? ) nextRotation="${normal}";;
                -????? ) nextRotation="${right}";;
            esac
        fi
 
        if [ $x -ge 0 ]; then
            case $x in
                ???? ) nextRotation="${normal}";;
                ????? ) nextRotation="${left}";;
            esac
        fi
 
        if [ ${nextRotation} = ${normal} ]; then
            case $y in
                -????? ) nextRotation="${inverted}";;
            esac
        fi
 
        #re-orientation
        if [ ${nextRotation} != ${currentOrientation} ]; then
            #Get the right rotation matrix
            case ${nextRotation} in
                ${normal}    ) T_Matrix=${T_Matrix_normal}   ;;
                ${left}      ) T_Matrix=${T_Matrix_left}     ;;
                ${inverted}  ) T_Matrix=${T_Matrix_inverted} ;;
                ${right}     ) T_Matrix=${T_Matrix_right}    ;;
                *            ) echo "Bug. nextRotation=${nextRotation}" ;;
            esac
            xrandr -o ${nextRotation}
            for input in ${xinputs[@]}; do
                xinput set-prop ${input} "Coordinate Transformation Matrix" ${T_Matrix}
            done
        fi
    fi
 
    sleep ${period}
done

Regarde la ligne avec "screen", avant c'était DSI1, maintenant c'est XWAYLAND0. Donc j'ai modifié le script, maintenant, normalement, on est indépendant du nom, que ce soit sur xorg ou wayland.

Téléverser une image : /wiki/hebergement-de-fichiers-sur-mlo

Arch	Machine	OS
x86_64	lenovo x250	mga9
armv7hl	bananapro	mga9
aarch64	Raspberry Pi 4B	mga9

Guygoye Membre non connecté

Modérateur Forgeron

Le 26/05/2019 à 20h14

#252949

Arf mince, ça ira mieux pour le prochain !

L'écran ne bouge pas et je ne vois pas le wayland0 dans le corps du script.

Code BASH :

+ hash xinput
+ '[' 0 -ne 0 ']'
+ hash xrandr
+ '[' 0 -ne 0 ']'
+ grep -a ./rotate.sh /proc/sched_debug
+ '[' 1 -eq 0 ']'
+ T_Matrix_normal=' 1  0  0  0  1  0  0  0  1'
+ T_Matrix_left=' 0 -1  1  1  0  0  0  0  1'
+ T_Matrix_inverted='-1  0  1  0 -1  1  0  0  1'
+ T_Matrix_right=' 0  1  0 -1  0  1  0  0  1'
+ T_Matrix=' 1  0  0  0  1  0  0  0  1'
+ sNormal=normal
+ sLeft=left
+ sRight=right
+ sInverted=inverted
+ vNormal=0
+ vLeft=1
+ vRight=3
+ vInverted=2
+ normal=normal
+ left=left
+ right=right
+ inverted=inverted
+ shopt -s extglob
+ device1='Virtual core XTEST pointer'
+ device2='Asus TouchPad'
+ device3='SIS0817:00 0457:1071'
++ xrandr
++ grep -m 1 connected
++ cut -d ' ' -f 1
+ screen=XWAYLAND0
+ period=1
++ xinput list
+ pointers='⎡ Virtual core pointer                        id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                  id=4    [slave  pointer  (2)]
⎜   ↳ xwayland-touch:16                           id=9    [slave  pointer  (2)]
⎜   ↳ xwayland-pointer:16                         id=6    [slave  pointer  (2)]
⎜   ↳ xwayland-relative-pointer:16                id=7    [slave  pointer  (2)]
⎣ Virtual core keyboard                       id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                 id=5    [slave  keyboard (3)]
    ↳ xwayland-keyboard:16                        id=8    [slave  keyboard (3)]'
+ xinputs=
++ echo '⎡ Virtual core pointer                        id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                  id=4    [slave  pointer  (2)]
⎜   ↳ xwayland-touch:16                           id=9    [slave  pointer  (2)]
⎜   ↳ xwayland-pointer:16                         id=6    [slave  pointer  (2)]
⎜   ↳ xwayland-relative-pointer:16                id=7    [slave  pointer  (2)]
⎣ Virtual core keyboard                       id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                 id=5    [slave  keyboard (3)]
    ↳ xwayland-keyboard:16                        id=8    [slave  keyboard (3)]'
++ grep 'Virtual core XTEST pointer'
++ sed 's/.*id=\([[:digit:]]*\).*/\1/'
++ tr '\n' ' '
+ xinputs=' 4 '
++ echo '⎡ Virtual core pointer                        id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                  id=4    [slave  pointer  (2)]
⎜   ↳ xwayland-touch:16                           id=9    [slave  pointer  (2)]
⎜   ↳ xwayland-pointer:16                         id=6    [slave  pointer  (2)]
⎜   ↳ xwayland-relative-pointer:16                id=7    [slave  pointer  (2)]
⎣ Virtual core keyboard                       id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                 id=5    [slave  keyboard (3)]
    ↳ xwayland-keyboard:16                        id=8    [slave  keyboard (3)]'
++ sed 's/.*id=\([[:digit:]]*\).*/\1/'
++ tr '\n' ' '
++ grep 'Asus TouchPad'
+ xinputs=' 4  '
++ echo '⎡ Virtual core pointer                        id=2    [master pointer  (3)]
⎜   ↳ Virtual core XTEST pointer                  id=4    [slave  pointer  (2)]
⎜   ↳ xwayland-touch:16                           id=9    [slave  pointer  (2)]
⎜   ↳ xwayland-pointer:16                         id=6    [slave  pointer  (2)]
⎜   ↳ xwayland-relative-pointer:16                id=7    [slave  pointer  (2)]
⎣ Virtual core keyboard                       id=3    [master keyboard (2)]
    ↳ Virtual core XTEST keyboard                 id=5    [slave  keyboard (3)]
++ grep 'SIS0817:00 0457:1071'
    ↳ xwayland-keyboard:16                        id=8    [slave  keyboard (3)]'
++ sed 's/.*id=\([[:digit:]]*\).*/\1/'
++ tr '\n' ' '
+ xinputs=' 4   '
+ true
+ locked=0
+ '[' 0 -eq 0 ']'
++ xrandr --verbose
++ sed -e 's/.*) \([[:alpha:]]*\) (.*/\1/'
++ grep XWAYLAND0
+ currentOrientation='XWAYLAND0 connected (normal left inverted right x axis y axis)'
+ case ${currentOrientation} in
+ echo bug.
bug.
++ cat /sys/bus/iio/devices/iio:device0/in_accel_x_raw
+ x=635
++ cat /sys/bus/iio/devices/iio:device0/in_accel_y_raw
+ y=13555
++ cat /sys/bus/iio/devices/iio:device0/in_accel_z_raw
+ z=-8643
+ nextRotation=normal
+ '[' 635 -le 0 ']'
+ '[' 635 -ge 0 ']'
+ case $x in
+ '[' normal = normal ']'
+ case $y in
+ '[' normal '!=' XWAYLAND0 connected '(normal' left inverted right x axis y 'axis)' ']'
./rotate.sh: ligne 154 : [: trop d'arguments
+ sleep 1
+ true
+ locked=0
+ '[' 0 -eq 0 ']'
++ xrandr --verbose
++ grep XWAYLAND0
++ sed -e 's/.*) \([[:alpha:]]*\) (.*/\1/'
+ currentOrientation='XWAYLAND0 connected (normal left inverted right x axis y axis)'
+ case ${currentOrientation} in
+ echo bug.
bug.
++ cat /sys/bus/iio/devices/iio:device0/in_accel_x_raw
+ x=904
++ cat /sys/bus/iio/devices/iio:device0/in_accel_y_raw
+ y=13856
++ cat /sys/bus/iio/devices/iio:device0/in_accel_z_raw
+ z=-8247
+ nextRotation=normal
+ '[' 904 -le 0 ']'
+ '[' 904 -ge 0 ']'
+ case $x in
+ '[' normal = normal ']'
+ case $y in
+ '[' normal '!=' XWAYLAND0 connected '(normal' left inverted right x axis y 'axis)' ']'
./rotate.sh: ligne 154 : [: trop d'arguments
+ sleep 1
+ true
+ locked=0
+ '[' 0 -eq 0 ']'
++ xrandr --verbose
++ grep XWAYLAND0
++ sed -e 's/.*) \([[:alpha:]]*\) (.*/\1/'
+ currentOrientation='XWAYLAND0 connected (normal left inverted right x axis y axis)'
+ case ${currentOrientation} in
+ echo bug.
bug.
++ cat /sys/bus/iio/devices/iio:device0/in_accel_x_raw
+ x=16709
++ cat /sys/bus/iio/devices/iio:device0/in_accel_y_raw
+ y=280
++ cat /sys/bus/iio/devices/iio:device0/in_accel_z_raw
+ z=-3462
+ nextRotation=normal
+ '[' 16709 -le 0 ']'
+ '[' 16709 -ge 0 ']'
+ case $x in
+ nextRotation=left
+ '[' left = normal ']'
+ '[' left '!=' XWAYLAND0 connected '(normal' left inverted right x axis y 'axis)' ']'
./rotate.sh: ligne 154 : [: trop d'arguments
+ sleep 1
+ true
+ locked=0
+ '[' 0 -eq 0 ']'
++ xrandr --verbose
++ grep XWAYLAND0
++ sed -e 's/.*) \([[:alpha:]]*\) (.*/\1/'
+ currentOrientation='XWAYLAND0 connected (normal left inverted right x axis y axis)'
+ case ${currentOrientation} in
+ echo bug.
bug.
++ cat /sys/bus/iio/devices/iio:device0/in_accel_x_raw
+ x=-149
++ cat /sys/bus/iio/devices/iio:device0/in_accel_y_raw
+ y=-15580
++ cat /sys/bus/iio/devices/iio:device0/in_accel_z_raw
+ z=-3283
+ nextRotation=normal
+ '[' -149 -le 0 ']'
+ case $x in
+ '[' -149 -ge 0 ']'
+ '[' normal = normal ']'
+ case $y in
+ nextRotation=inverted
+ '[' inverted '!=' XWAYLAND0 connected '(normal' left inverted right x axis y 'axis)' ']'
./rotate.sh: ligne 154 : [: trop d'arguments
+ sleep 1
+ true
+ locked=0
+ '[' 0 -eq 0 ']'
++ xrandr --verbose
++ grep XWAYLAND0
++ sed -e 's/.*) \([[:alpha:]]*\) (.*/\1/'
+ currentOrientation='XWAYLAND0 connected (normal left inverted right x axis y axis)'
+ case ${currentOrientation} in
+ echo bug.
bug.
++ cat /sys/bus/iio/devices/iio:device0/in_accel_x_raw
+ x=12594
++ cat /sys/bus/iio/devices/iio:device0/in_accel_y_raw
+ y=11441
++ cat /sys/bus/iio/devices/iio:device0/in_accel_z_raw
+ z=-6628
+ nextRotation=normal
+ '[' 12594 -le 0 ']'
+ '[' 12594 -ge 0 ']'
+ case $x in
+ nextRotation=left
+ '[' left = normal ']'
+ '[' left '!=' XWAYLAND0 connected '(normal' left inverted right x axis y 'axis)' ']'
./rotate.sh: ligne 154 : [: trop d'arguments
+ sleep 1
+ true
+ locked=0
+ '[' 0 -eq 0 ']'
++ xrandr --verbose
++ grep XWAYLAND0
++ sed -e 's/.*) \([[:alpha:]]*\) (.*/\1/'
+ currentOrientation='XWAYLAND0 connected (normal left inverted right x axis y axis)'
+ case ${currentOrientation} in
+ echo bug.
bug.
++ cat /sys/bus/iio/devices/iio:device0/in_accel_x_raw
+ x=1095
++ cat /sys/bus/iio/devices/iio:device0/in_accel_y_raw
+ y=13769
++ cat /sys/bus/iio/devices/iio:device0/in_accel_z_raw
+ z=-8401
+ nextRotation=normal
+ '[' 1095 -le 0 ']'
+ '[' 1095 -ge 0 ']'
+ case $x in
+ nextRotation=normal
+ '[' normal = normal ']'
+ case $y in
+ '[' normal '!=' XWAYLAND0 connected '(normal' left inverted right x axis y 'axis)' ']'
./rotate.sh: ligne 154 : [: trop d'arguments
+ sleep 1

Répondre

Vous n'êtes pas autorisé à écrire dans cette catégorie

Notre Mission	Liens du site	Nous joindre	MLO est hébergé par
MLO est le forum francophone de la distribution Mageia et vous propose également un portail dédié aux débutants. MLO vous apporte un support sur la distribution grâce à son forum et vous offre des nouvelles de la distribution, des logiciels libres et de l'Open Source en général. Notre site a aussi pour but de vous montrer que Mageia est un système d'exploitation complet et facile à prendre en main. Vous apprendrez à installer simplement et à administrer efficacement votre système en un temps record.	Forum Documentation News du libre Mageia	Contacter MLO Mastodon MLO Flux RSS	MLO est un projet soutenu par Nos partenaires et amis
MLO est mis à disposition selon les termes de la licence Creative Commons.

Jybz Membre non connecté

Jybz Membre non connecté

Guygoye Membre non connecté

Guygoye Membre non connecté

teutates Membre non connecté

Jybz Membre non connecté

Guygoye Membre non connecté

Jybz Membre non connecté

Guygoye Membre non connecté

Jybz Membre non connecté

Jybz Membre non connecté

Jybz Membre non connecté

Guygoye Membre non connecté

Jybz Membre non connecté

Jybz Membre non connecté

Guygoye Membre non connecté