Blocage ordi fréquent
L'ordi se bloque pendant quelques secondes voir minutes
Système et matériels / Installation et configuration
bonengo Membre non connecté
-
- Voir le profil du membre bonengo
- Inscrit le : 22/10/2013
- Groupes :
Reprise du message précédent
excusez moi, je me suis laissé abusé par l'ancienne dénomination8000 => 8 coeurs
6000 => 6 coeurs
etc...
L'installation automatique des drivers en dépot tainted de mageia 4 a-t-il fonctionné pour ta carte graphique?
(le combo AMD/ATI n'est pas obligatoire, simplement sous environnement windows, plus efficace, testé par des journalistes spécialisé en informatique).
zatox Membre non connecté
-
- Voir le profil du membre zatox
- Inscrit le : 27/09/2011
- Groupes :
tobaggo17 :
Il faudrait d'ailleurs peut être voir du coté de:
Code BASH :
# cpupower -c all frequency-info
Code BASH :
# cpupower -c all frequency-info
Voici la réponse à la commande: cpupower -c all frequency-info
Caché :
cpupower -c all frequency-info
analyse du CPU 0 :
pilote : acpi-cpufreq
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 18.0 us.
limitation matérielle : 1.05 GHz - 2.10 GHz
plage de fréquence : 2.10 GHz, 1.05 GHz
régulateurs disponibles : ondemand, conservative, powersave, userspace, performance
tactique actuelle : la fréquence doit être comprise entre 1.05 GHz et 2.10 GHz.
Le régulateur "ondemand" est libre de choisir la vitesse
dans cette plage de fréquences.
la fréquence actuelle de ce CPU est 1.05 GHz.
boost state support:
Supported: no
Active: no
analyse du CPU 1 :
pilote : acpi-cpufreq
CPUs which run at the same hardware frequency: 1
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 18.0 us.
limitation matérielle : 1.05 GHz - 2.10 GHz
plage de fréquence : 2.10 GHz, 1.05 GHz
régulateurs disponibles : ondemand, conservative, powersave, userspace, performance
tactique actuelle : la fréquence doit être comprise entre 1.05 GHz et 2.10 GHz.
Le régulateur "ondemand" est libre de choisir la vitesse
dans cette plage de fréquences.
la fréquence actuelle de ce CPU est 1.05 GHz.
boost state support:
Supported: no
Active: no
analyse du CPU 2 :
pilote : acpi-cpufreq
CPUs which run at the same hardware frequency: 2
CPUs which need to have their frequency coordinated by software: 2
maximum transition latency: 18.0 us.
limitation matérielle : 1.05 GHz - 2.10 GHz
plage de fréquence : 2.10 GHz, 1.05 GHz
régulateurs disponibles : ondemand, conservative, powersave, userspace, performance
tactique actuelle : la fréquence doit être comprise entre 1.05 GHz et 2.10 GHz.
Le régulateur "ondemand" est libre de choisir la vitesse
dans cette plage de fréquences.
la fréquence actuelle de ce CPU est 1.05 GHz.
boost state support:
Supported: no
Active: no
analyse du CPU 0 :
pilote : acpi-cpufreq
CPUs which run at the same hardware frequency: 0
CPUs which need to have their frequency coordinated by software: 0
maximum transition latency: 18.0 us.
limitation matérielle : 1.05 GHz - 2.10 GHz
plage de fréquence : 2.10 GHz, 1.05 GHz
régulateurs disponibles : ondemand, conservative, powersave, userspace, performance
tactique actuelle : la fréquence doit être comprise entre 1.05 GHz et 2.10 GHz.
Le régulateur "ondemand" est libre de choisir la vitesse
dans cette plage de fréquences.
la fréquence actuelle de ce CPU est 1.05 GHz.
boost state support:
Supported: no
Active: no
analyse du CPU 1 :
pilote : acpi-cpufreq
CPUs which run at the same hardware frequency: 1
CPUs which need to have their frequency coordinated by software: 1
maximum transition latency: 18.0 us.
limitation matérielle : 1.05 GHz - 2.10 GHz
plage de fréquence : 2.10 GHz, 1.05 GHz
régulateurs disponibles : ondemand, conservative, powersave, userspace, performance
tactique actuelle : la fréquence doit être comprise entre 1.05 GHz et 2.10 GHz.
Le régulateur "ondemand" est libre de choisir la vitesse
dans cette plage de fréquences.
la fréquence actuelle de ce CPU est 1.05 GHz.
boost state support:
Supported: no
Active: no
analyse du CPU 2 :
pilote : acpi-cpufreq
CPUs which run at the same hardware frequency: 2
CPUs which need to have their frequency coordinated by software: 2
maximum transition latency: 18.0 us.
limitation matérielle : 1.05 GHz - 2.10 GHz
plage de fréquence : 2.10 GHz, 1.05 GHz
régulateurs disponibles : ondemand, conservative, powersave, userspace, performance
tactique actuelle : la fréquence doit être comprise entre 1.05 GHz et 2.10 GHz.
Le régulateur "ondemand" est libre de choisir la vitesse
dans cette plage de fréquences.
la fréquence actuelle de ce CPU est 1.05 GHz.
boost state support:
Supported: no
Active: no
tobaggo17 Membre non connecté
-
- Voir le profil du membre tobaggo17
- Inscrit le : 18/12/2013
- Groupes :
donc la on voit bien qu'il n'y a pas de problème particulier sur la détection du proc et la gestion de l’énergie. Je suppose que tu n'as pas pu faire fonctionner le pilote nvidia 331.49 qui est dans les dépots update et que tu as toujours ton pb de "feu d'artifice"...
Une question :
tu dis avoir Mageia3 sur un disque et mageia4 sur un autre disque, mais ton compte utilisateur (/home) est-il le même physiquement parlant ?
Certaines cartes nvidia ne sont pas totalement supportées par le driver nouveau, ceci peut expliquer tes problèmes actuels de freeze, mais ce qui me choque c'est que tu arrives au login avec le driver proprio nvidia, donc il est chargé, configuré et fonctionnel, et ensuite après le login, a l'arrivée sur le bureau, là tu as ton plantage ...On dirait un problème d'affichage bureau qui plante le serveur graphique ....
Édité par tobaggo17 Le 28/03/2014 à 06h32
zatox Membre non connecté
-
- Voir le profil du membre zatox
- Inscrit le : 27/09/2011
- Groupes :
tobaggo17 :
donc la on voit bien qu'il n'y a pas de problème particulier sur la détection du proc et la gestion de l’énergie. Je suppose que tu n'as pas pu faire fonctionner le pilote nvidia 331.49 qui est dans les dépots update et que tu as toujours ton pb de "feu d'artifice"...
Exact tu supposes bien, et je fonctionne sous mga4 sans pilote proprio nvidia.
tobaggo17 :
tu dis avoir Mageia3 sur un disque et mageia4 sur un autre disque, mais ton compte utilisateur (/home) est-il le même physiquement parlant ?
Là non ce n'est pas tout à fait ce que je dis. D'abord mga3 et mga4 ne sont pas sur des disques différents mais sur un même disque. Ensuite chaque système mga3 mga4 a bien sûr sa partition racine et a également sa propre partition /home.
Les 2 systèmes sont totalement indépendants l'un de l'autre. Je travaille actuellement sous mga4 et tous les 2 ou 3 jours, je sauvegarde mes documents de mga4 /home/user/mes_documents vers /home/user/mes_documents de mga3.
tobaggo17 :
Certaines cartes nvidia ne sont pas totalement supportées par le driver nouveau, ceci peut expliquer tes problèmes actuels de freeze, mais ce qui me choque c'est que tu arrives au login avec le driver proprio nvidia, donc il est chargé, configuré et fonctionnel, et ensuite après le login, a l'arrivée sur le bureau, là tu as ton plantage ...On dirait un problème d'affichage bureau qui plante le serveur graphique ....
Je confirme que lorsque je positionne le pilote proprio de ma CG, je redémarre, j'arrive au login (je suppose que le driver nvidia est chargé), je me logue, j'arrive sur le bureau (cairo-dock se lance) puis ça freeze, impossible de prendre la main, puis plantage. J'ai même fait l'expérience de ne pas lancer cairo-dock au démarrage pour voir si ça ne serait pas lui qui pose problème, et bien non dans ce cas même scénario sauf que cairo-dock ne se lance pas mais quelques secondes après être arrivé sur le bureau ça freeze et plantage.
Est-ce qu'à ton avis je devrais ré-essayer d'installer le pilote nvidia 331.49 des fois qu'il y aurait eu des mises à jour de quelque chose ? je ne sais pas quoi mais bon je peux le refaire dès que j'ai un moment on ne sait jamais qu'en penses-tu ?
pour ton aide..
tobaggo17 Membre non connecté
-
- Voir le profil du membre tobaggo17
- Inscrit le : 18/12/2013
- Groupes :
Pourrais-tu créer un autre utilisateur de test , qui utilise un autre bureau, et tester cette version du pilote?
zatox Membre non connecté
-
- Voir le profil du membre zatox
- Inscrit le : 27/09/2011
- Groupes :
tobaggo17 :
Concernant le pilote 331.49, c'est la version recommandée par nvidia pour ta carte GeForce 8300, alors que précédemment c'était le 319.82 donc ça devrait fonctionner.
Tu as tout à fait raison, je viens d'installer le pilote 331.49 et j'ai redémarré l'ordi et pour le moment ça fonctionne. Pourtant il me semble que j'avais essayé cette version et que ça plantait !!!
Il me reste à voir si le problème de blocage de l'ordi se reproduit ou non.
Par contre quand je vais dans CCM --> Matériel --> configurer le serveur d'affichage il me dit qu'il existe un pilote propriétaire pour ma CG et me demande si je veux l'installer, là j'ai répondu NON parce que je pense que ça va planter ce qui veut dire qu'il installerait (si je répondais OUI) un autre pilote que la version 331.49 ? qu'en penses-tu ?
En tout cas merci pour ton aide pour le moment ça marche. Affaire à suivre !!
ça ne fait pas très longtemps que je suis connecté avec la version 331.49 mais quand même regarde le résultat de sensors:
Caché :
sensors
Qu'en penses-tu ?
nouveau-pci-0200
Adapter: PCI adapter
temp1: +87.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +5.0°C)
(emerg = +135.0°C, hyst = +5.0°C)
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.12 V (min = +0.80 V, max = +1.80 V)
+3.3 Voltage: +3.28 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: +5.12 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: +12.03 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 3409 RPM (min = 600 RPM, max = 7200 RPM)
CHASSIS FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
POWER FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
CPU Temperature: +45.0°C (high = +60.0°C, crit = +95.0°C)
MB Temperature: +38.0°C (high = +45.0°C, crit = +95.0°C)
Qu'en penses-tu ?
nouveau-pci-0200
Adapter: PCI adapter
temp1: +87.0°C (high = +95.0°C, hyst = +3.0°C)
(crit = +105.0°C, hyst = +5.0°C)
(emerg = +135.0°C, hyst = +5.0°C)
atk0110-acpi-0
Adapter: ACPI interface
Vcore Voltage: +1.12 V (min = +0.80 V, max = +1.80 V)
+3.3 Voltage: +3.28 V (min = +2.97 V, max = +3.63 V)
+5 Voltage: +5.12 V (min = +4.50 V, max = +5.50 V)
+12 Voltage: +12.03 V (min = +10.20 V, max = +13.80 V)
CPU FAN Speed: 3409 RPM (min = 600 RPM, max = 7200 RPM)
CHASSIS FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
POWER FAN Speed: 0 RPM (min = 600 RPM, max = 7200 RPM)
CPU Temperature: +45.0°C (high = +60.0°C, crit = +95.0°C)
MB Temperature: +38.0°C (high = +45.0°C, crit = +95.0°C)
tobaggo17 Membre non connecté
-
- Voir le profil du membre tobaggo17
- Inscrit le : 18/12/2013
- Groupes :
Peux-tu me dire quels paquets tu as installés?
Édité par tobaggo17 Le 28/03/2014 à 19h04
zatox Membre non connecté
-
- Voir le profil du membre zatox
- Inscrit le : 27/09/2011
- Groupes :
tobaggo17 :
Peux-tu me dire quels paquets tu as installés?
Voici les paquets nvidia
Caché : 
Par contre, la commande nvidia settings passée en utilisateur ou en root:
Caché :
nvidia settings
bash: nvidia : commande introuvable
bash: nvidia : commande introuvable
Ensuite le fichier /etc/X11/xorg.conf avec sa date de derniere modif 23/03/2014 ne me parait pas non plus en phase:
Caché :
# File generated by XFdrake (rev 262502)
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************
Section "ServerFlags"
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort)
#DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection
Section "Module"
Load "v4l" # Video for Linux
EndSection
Section "Monitor"
Identifier "monitor1"
HorizSync 30-83
VertRefresh 56-75
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Device"
Identifier "device1"
VendorName "NVIDIA Corporation"
BoardName "NVIDIA GeForce 8100 to GeForce 360"
Driver "nouveau"
Option "DPMS"
Option "AddARGBGLXVisuals"
Option "DynamicTwinView" "false"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
Subsection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
EndSection
# File generated by XFdrake (rev 262502)
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************
Section "ServerFlags"
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort)
#DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection
Section "Module"
Load "v4l" # Video for Linux
EndSection
Section "Monitor"
Identifier "monitor1"
HorizSync 30-83
VertRefresh 56-75
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection
Section "Device"
Identifier "device1"
VendorName "NVIDIA Corporation"
BoardName "NVIDIA GeForce 8100 to GeForce 360"
Driver "nouveau"
Option "DPMS"
Option "AddARGBGLXVisuals"
Option "DynamicTwinView" "false"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24
Subsection "Display"
Depth 8
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
Subsection "Display"
Depth 15
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
Subsection "Display"
Depth 16
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
Subsection "Display"
Depth 24
Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
Screen "screen1"
EndSection
Dans ce fichier il y a à un endroit "driver=nouveau" !!! il doit peut-être exister une commande qui donne exactement le driver utilisé mais c'estt vrai qu'avec tous ces éléments, je ne suis pas certain d'utiliser la version 331.49 !!!
pour ton aide
cactus Membre non connecté
-
- Voir le profil du membre cactus
- Inscrit le : 07/03/2014
Édité par cactus Le 29/03/2014 à 09h51
zatox Membre non connecté
-
- Voir le profil du membre zatox
- Inscrit le : 27/09/2011
- Groupes :
cactus :
C'est pas "nvidia" le driver proprio ? (ou "nv" ?)
Ben je ne sais pas, tu as peut-être raison mais en tous cas, je viens d'avoir un blocage total de l'ordi qui a duré plusieurs minutes et j'ai dû redémarrer. Donc mon problème n'est pas réglé
Visiteur
Code TEXT :
lsmod dmesg journalctl --no-pager
zatox Membre non connecté
-
- Voir le profil du membre zatox
- Inscrit le : 27/09/2011
- Groupes :
sylvainsjc :
Bon... peux tu nous donner le retour de ces commandes en root :
Code TEXT :
lsmod
dmesg
journalctl --no-pager
Code TEXT :
lsmod
dmesg
journalctl --no-pager
bien sûr no problem, par contre il y a du monde !!
lsmod
Caché :
lsmod
Module Size Used by
ipt_IFWLOG 12550 6
ipt_psd 53435 1
cls_basic 12802 0
cls_flow 16928 0
cls_fw 12760 0
cls_u32 16969 0
sch_fq_codel 17313 0
sch_tbf 12945 0
sch_prio 12960 0
sch_hfsc 25916 0
sch_htb 21889 0
sch_ingress 12746 0
sch_sfq 17112 0
bridge 94631 0
stp 12848 1 bridge
llc 14160 2 stp,bridge
ip6t_MASQUERADE 12672 0
ip6t_rpfilter 12490 0
xt_CHECKSUM 12493 0
ipt_rpfilter 12490 0
xt_statistic 12537 0
xt_CT 12820 36
xt_LOG 17445 8
xt_connlimit 12564 0
xt_realm 12450 0
xt_addrtype 12563 4
ip_set_hash_ip 26724 2
xt_comment 12456 48
xt_recent 18069 2
ipt_ULOG 13742 0
ipt_REJECT 12485 4
ipt_MASQUERADE 12760 0
ipt_ECN 12473 0
xt_nat 12601 0
ipt_CLUSTERIP 13247 0
ipt_ah 12694 0
ip6table_nat 12871 0
nf_nat_ipv6 13111 1 ip6table_nat
nf_nat_tftp 12420 0
nf_nat_snmp_basic 17082 0
nf_conntrack_snmp 12745 3 nf_nat_snmp_basic
nf_nat_sip 16971 0
nf_nat_pptp 12926 0
nf_nat_proto_gre 12865 1 nf_nat_pptp
nf_nat_irc 12606 0
nf_nat_h323 17419 0
nf_nat_ftp 12645 0
xt_set 12998 2
ip_set 31055 2 ip_set_hash_ip,xt_set
nf_nat_amanda 12422 0
nf_conntrack_tftp 12953 5 nf_nat_tftp
nf_conntrack_sip 24767 5 nf_nat_sip
nf_conntrack_sane 12938 4
nf_conntrack_proto_udplite 13076 0
nf_conntrack_proto_sctp 18328 0
nf_conntrack_pptp 14628 3 nf_nat_pptp
nf_conntrack_proto_gre 14021 1 nf_conntrack_pptp
nf_conntrack_netlink 31401 0
nf_conntrack_netbios_ns 12585 2
nf_conntrack_broadcast 12541 2 nf_conntrack_netbios_ns,nf_conntrack_snmp
nf_conntrack_irc 13249 3 nf_nat_irc
nf_conntrack_h323 62776 9 nf_nat_h323
ts_kmp 12533 5
nf_conntrack_ftp 14056 5 nf_nat_ftp
nf_conntrack_amanda 12897 5 nf_nat_amanda
xt_TPROXY 17135 0
xt_time 12581 0
xt_TCPMSS 12619 0
xt_tcpmss 12453 0
xt_sctp 12733 0
xt_policy 12518 0
xt_pkttype 12456 0
xt_physdev 12523 0
xt_owner 12478 0
xt_NFQUEUE 12672 0
xt_NFLOG 12481 0
nfnetlink_log 17533 1 xt_NFLOG
xt_multiport 12694 9
xt_mark 12499 2
xt_mac 12444 0
xt_limit 12541 0
xt_length 12480 0
xt_iprange 12679 0
xt_helper 12519 0
xt_hashlimit 17279 0
xt_DSCP 12549 0
xt_dscp 12525 0
xt_dccp 12534 0
xt_connmark 12659 0
xt_CLASSIFY 12459 0
xt_AUDIT 12590 0
iptable_raw 12598 1
ip6t_REJECT 12826 4
iptable_nat 12867 0
nf_nat_ipv4 13095 1 iptable_nat
xt_tcpudp 12756 60
nf_nat 20628 15 nf_nat_ftp,nf_nat_irc,nf_nat_sip,nf_nat_amanda,ipt_MASQUERADE,nf_nat_proto_gre,ip6t_MASQUERADE,nf_nat_h323,nf_nat_ipv4,nf_nat_ipv6,nf_nat_pptp,nf_nat_tftp,xt_nat,ip6table_nat,iptable_nat
xt_state 12514 0
nf_conntrack_ipv4 14492 33
nf_defrag_ipv4 12649 2 xt_TPROXY,nf_conntrack_ipv4
nf_conntrack_ipv6 18414 20
nf_defrag_ipv6 26070 2 xt_TPROXY,nf_conntrack_ipv6
xt_conntrack 12664 15
iptable_mangle 12615 1
nf_conntrack 83617 39 nf_nat_ftp,nf_nat_irc,nf_nat_sip,nf_nat_amanda,xt_CT,nf_nat_snmp_basic,nf_conntrack_netbios_ns,nf_conntrack_proto_gre,xt_helper,ipt_MASQUERADE,nf_conntrack_proto_udplite,nf_nat,ip6t_MASQUERADE,xt_state,xt_connlimit,nf_nat_h323,nf_nat_ipv4,nf_nat_ipv6,nf_nat_pptp,nf_nat_tftp,xt_conntrack,nf_conntrack_amanda,ipt_CLUSTERIP,nf_conntrack_proto_sctp,nf_conntrack_netlink,ip6table_nat,nf_conntrack_broadcast,xt_connmark,nf_conntrack_ftp,nf_conntrack_irc,nf_conntrack_sip,iptable_nat,nf_conntrack_h323,nf_conntrack_ipv4,nf_conntrack_ipv6,nf_conntrack_pptp,nf_conntrack_sane,nf_conntrack_snmp,nf_conntrack_tftp
ip6table_raw 12603 1
ip6table_mangle 12620 1
nfnetlink 14214 3 nfnetlink_log,ip_set,nf_conntrack_netlink
ip6table_filter 12711 1
ip6_tables 17819 4 ip6table_filter,ip6table_mangle,ip6table_nat,ip6table_raw
iptable_filter 12706 1
ip_tables 17987 4 iptable_filter,iptable_mangle,iptable_nat,iptable_raw
x_tables 22067 59 xt_physdev,xt_pkttype,ip6table_filter,xt_statistic,xt_DSCP,xt_dccp,xt_dscp,xt_iprange,xt_mark,xt_sctp,xt_time,xt_CT,xt_helper,ip6table_mangle,ip6t_rpfilter,xt_length,xt_comment,ipt_ULOG,xt_policy,xt_CHECKSUM,xt_recent,ip_tables,xt_tcpmss,xt_tcpudp,ipt_MASQUERADE,ipt_ah,xt_AUDIT,xt_NFQUEUE,xt_NFLOG,ip6t_MASQUERADE,xt_limit,xt_owner,xt_realm,xt_state,ipt_rpfilter,xt_connlimit,xt_conntrack,xt_LOG,xt_mac,xt_nat,xt_set,ipt_IFWLOG,ipt_CLUSTERIP,xt_hashlimit,xt_multiport,iptable_filter,ip6table_raw,xt_CLASSIFY,xt_TCPMSS,xt_TPROXY,xt_connmark,ipt_REJECT,iptable_mangle,ipt_ECN,ipt_psd,ip6_tables,xt_addrtype,iptable_raw,ip6t_REJECT
af_packet 30974 2
hwmon_vid 12687 0
snd_hda_codec_hdmi 40363 1
snd_hda_codec_realtek 50469 1
snd_hda_intel 42658 4
snd_hda_codec 164101 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 13272 1 snd_hda_codec
usblp 18236 0
cuse 13213 3
fuse 76800 6 cuse
joydev 17097 0
snd_pcm 85462 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 14230 2 snd_pcm,snd_hda_intel
ppdev 17363 0
kvm_amd 50444 0
kvm 378238 1 kvm_amd
evdev 17421 21
parport_pc 32366 0
parport 40768 2 ppdev,parport_pc
forcedeth 62099 0
serio_raw 13189 0
k10temp 12958 0
snd_timer 24326 1 snd_pcm
shpchp 32129 0
cpufreq_ondemand 15534 3
cpufreq_conservative 14802 0
cpufreq_powersave 12554 0
snd 62347 15 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 14599 1 snd
acpi_cpufreq 19118 0
processor 30454 1 acpi_cpufreq
asus_atk0110 18201 0
i2c_nforce2 13037 0
ipv6 310176 51 ip6table_mangle,ip6t_rpfilter,bridge,nf_defrag_ipv6,ip6t_MASQUERADE,nf_nat_ipv6,ip6table_nat,xt_TPROXY,ip6t_REJECT,nf_conntrack_ipv6
autofs4 33269 2
hid_generic 12492 0
usbhid 46960 0
hid 87340 2 hid_generic,usbhid
usb_storage 48294 2
firewire_ohci 35488 0
firewire_core 57656 1 firewire_ohci
crc_itu_t 12627 1 firewire_core
ehci_pci 12777 0
ehci_hcd 65048 1 ehci_pci
uhci_hcd 31567 0
sr_mod 21964 0
ohci_pci 13305 0
ohci_hcd 32002 1 ohci_pci
usbcore 189904 8 usblp,uhci_hcd,usb_storage,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid
usb_common 12921 1 usbcore
nouveau 843964 4
button 13599 1 nouveau
video 18735 1 nouveau
mxm_wmi 12893 1 nouveau
wmi 18673 2 mxm_wmi,nouveau
i2c_algo_bit 13197 1 nouveau
drm_kms_helper 42523 1 nouveau
ttm 71764 1 nouveau
drm 242921 6 ttm,drm_kms_helper,nouveau
i2c_core 30341 5 drm,drm_kms_helper,i2c_algo_bit,nouveau,i2c_nforce2
amd74xx 12833 0
ide_pci_generic 12754 0
ide_core 103594 2 ide_pci_generic,amd74xx
ata_generic 12790 0
pata_acpi 12886 0
pata_amd 13761 0
Module Size Used by
ipt_IFWLOG 12550 6
ipt_psd 53435 1
cls_basic 12802 0
cls_flow 16928 0
cls_fw 12760 0
cls_u32 16969 0
sch_fq_codel 17313 0
sch_tbf 12945 0
sch_prio 12960 0
sch_hfsc 25916 0
sch_htb 21889 0
sch_ingress 12746 0
sch_sfq 17112 0
bridge 94631 0
stp 12848 1 bridge
llc 14160 2 stp,bridge
ip6t_MASQUERADE 12672 0
ip6t_rpfilter 12490 0
xt_CHECKSUM 12493 0
ipt_rpfilter 12490 0
xt_statistic 12537 0
xt_CT 12820 36
xt_LOG 17445 8
xt_connlimit 12564 0
xt_realm 12450 0
xt_addrtype 12563 4
ip_set_hash_ip 26724 2
xt_comment 12456 48
xt_recent 18069 2
ipt_ULOG 13742 0
ipt_REJECT 12485 4
ipt_MASQUERADE 12760 0
ipt_ECN 12473 0
xt_nat 12601 0
ipt_CLUSTERIP 13247 0
ipt_ah 12694 0
ip6table_nat 12871 0
nf_nat_ipv6 13111 1 ip6table_nat
nf_nat_tftp 12420 0
nf_nat_snmp_basic 17082 0
nf_conntrack_snmp 12745 3 nf_nat_snmp_basic
nf_nat_sip 16971 0
nf_nat_pptp 12926 0
nf_nat_proto_gre 12865 1 nf_nat_pptp
nf_nat_irc 12606 0
nf_nat_h323 17419 0
nf_nat_ftp 12645 0
xt_set 12998 2
ip_set 31055 2 ip_set_hash_ip,xt_set
nf_nat_amanda 12422 0
nf_conntrack_tftp 12953 5 nf_nat_tftp
nf_conntrack_sip 24767 5 nf_nat_sip
nf_conntrack_sane 12938 4
nf_conntrack_proto_udplite 13076 0
nf_conntrack_proto_sctp 18328 0
nf_conntrack_pptp 14628 3 nf_nat_pptp
nf_conntrack_proto_gre 14021 1 nf_conntrack_pptp
nf_conntrack_netlink 31401 0
nf_conntrack_netbios_ns 12585 2
nf_conntrack_broadcast 12541 2 nf_conntrack_netbios_ns,nf_conntrack_snmp
nf_conntrack_irc 13249 3 nf_nat_irc
nf_conntrack_h323 62776 9 nf_nat_h323
ts_kmp 12533 5
nf_conntrack_ftp 14056 5 nf_nat_ftp
nf_conntrack_amanda 12897 5 nf_nat_amanda
xt_TPROXY 17135 0
xt_time 12581 0
xt_TCPMSS 12619 0
xt_tcpmss 12453 0
xt_sctp 12733 0
xt_policy 12518 0
xt_pkttype 12456 0
xt_physdev 12523 0
xt_owner 12478 0
xt_NFQUEUE 12672 0
xt_NFLOG 12481 0
nfnetlink_log 17533 1 xt_NFLOG
xt_multiport 12694 9
xt_mark 12499 2
xt_mac 12444 0
xt_limit 12541 0
xt_length 12480 0
xt_iprange 12679 0
xt_helper 12519 0
xt_hashlimit 17279 0
xt_DSCP 12549 0
xt_dscp 12525 0
xt_dccp 12534 0
xt_connmark 12659 0
xt_CLASSIFY 12459 0
xt_AUDIT 12590 0
iptable_raw 12598 1
ip6t_REJECT 12826 4
iptable_nat 12867 0
nf_nat_ipv4 13095 1 iptable_nat
xt_tcpudp 12756 60
nf_nat 20628 15 nf_nat_ftp,nf_nat_irc,nf_nat_sip,nf_nat_amanda,ipt_MASQUERADE,nf_nat_proto_gre,ip6t_MASQUERADE,nf_nat_h323,nf_nat_ipv4,nf_nat_ipv6,nf_nat_pptp,nf_nat_tftp,xt_nat,ip6table_nat,iptable_nat
xt_state 12514 0
nf_conntrack_ipv4 14492 33
nf_defrag_ipv4 12649 2 xt_TPROXY,nf_conntrack_ipv4
nf_conntrack_ipv6 18414 20
nf_defrag_ipv6 26070 2 xt_TPROXY,nf_conntrack_ipv6
xt_conntrack 12664 15
iptable_mangle 12615 1
nf_conntrack 83617 39 nf_nat_ftp,nf_nat_irc,nf_nat_sip,nf_nat_amanda,xt_CT,nf_nat_snmp_basic,nf_conntrack_netbios_ns,nf_conntrack_proto_gre,xt_helper,ipt_MASQUERADE,nf_conntrack_proto_udplite,nf_nat,ip6t_MASQUERADE,xt_state,xt_connlimit,nf_nat_h323,nf_nat_ipv4,nf_nat_ipv6,nf_nat_pptp,nf_nat_tftp,xt_conntrack,nf_conntrack_amanda,ipt_CLUSTERIP,nf_conntrack_proto_sctp,nf_conntrack_netlink,ip6table_nat,nf_conntrack_broadcast,xt_connmark,nf_conntrack_ftp,nf_conntrack_irc,nf_conntrack_sip,iptable_nat,nf_conntrack_h323,nf_conntrack_ipv4,nf_conntrack_ipv6,nf_conntrack_pptp,nf_conntrack_sane,nf_conntrack_snmp,nf_conntrack_tftp
ip6table_raw 12603 1
ip6table_mangle 12620 1
nfnetlink 14214 3 nfnetlink_log,ip_set,nf_conntrack_netlink
ip6table_filter 12711 1
ip6_tables 17819 4 ip6table_filter,ip6table_mangle,ip6table_nat,ip6table_raw
iptable_filter 12706 1
ip_tables 17987 4 iptable_filter,iptable_mangle,iptable_nat,iptable_raw
x_tables 22067 59 xt_physdev,xt_pkttype,ip6table_filter,xt_statistic,xt_DSCP,xt_dccp,xt_dscp,xt_iprange,xt_mark,xt_sctp,xt_time,xt_CT,xt_helper,ip6table_mangle,ip6t_rpfilter,xt_length,xt_comment,ipt_ULOG,xt_policy,xt_CHECKSUM,xt_recent,ip_tables,xt_tcpmss,xt_tcpudp,ipt_MASQUERADE,ipt_ah,xt_AUDIT,xt_NFQUEUE,xt_NFLOG,ip6t_MASQUERADE,xt_limit,xt_owner,xt_realm,xt_state,ipt_rpfilter,xt_connlimit,xt_conntrack,xt_LOG,xt_mac,xt_nat,xt_set,ipt_IFWLOG,ipt_CLUSTERIP,xt_hashlimit,xt_multiport,iptable_filter,ip6table_raw,xt_CLASSIFY,xt_TCPMSS,xt_TPROXY,xt_connmark,ipt_REJECT,iptable_mangle,ipt_ECN,ipt_psd,ip6_tables,xt_addrtype,iptable_raw,ip6t_REJECT
af_packet 30974 2
hwmon_vid 12687 0
snd_hda_codec_hdmi 40363 1
snd_hda_codec_realtek 50469 1
snd_hda_intel 42658 4
snd_hda_codec 164101 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 13272 1 snd_hda_codec
usblp 18236 0
cuse 13213 3
fuse 76800 6 cuse
joydev 17097 0
snd_pcm 85462 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 14230 2 snd_pcm,snd_hda_intel
ppdev 17363 0
kvm_amd 50444 0
kvm 378238 1 kvm_amd
evdev 17421 21
parport_pc 32366 0
parport 40768 2 ppdev,parport_pc
forcedeth 62099 0
serio_raw 13189 0
k10temp 12958 0
snd_timer 24326 1 snd_pcm
shpchp 32129 0
cpufreq_ondemand 15534 3
cpufreq_conservative 14802 0
cpufreq_powersave 12554 0
snd 62347 15 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 14599 1 snd
acpi_cpufreq 19118 0
processor 30454 1 acpi_cpufreq
asus_atk0110 18201 0
i2c_nforce2 13037 0
ipv6 310176 51 ip6table_mangle,ip6t_rpfilter,bridge,nf_defrag_ipv6,ip6t_MASQUERADE,nf_nat_ipv6,ip6table_nat,xt_TPROXY,ip6t_REJECT,nf_conntrack_ipv6
autofs4 33269 2
hid_generic 12492 0
usbhid 46960 0
hid 87340 2 hid_generic,usbhid
usb_storage 48294 2
firewire_ohci 35488 0
firewire_core 57656 1 firewire_ohci
crc_itu_t 12627 1 firewire_core
ehci_pci 12777 0
ehci_hcd 65048 1 ehci_pci
uhci_hcd 31567 0
sr_mod 21964 0
ohci_pci 13305 0
ohci_hcd 32002 1 ohci_pci
usbcore 189904 8 usblp,uhci_hcd,usb_storage,ohci_hcd,ohci_pci,ehci_hcd,ehci_pci,usbhid
usb_common 12921 1 usbcore
nouveau 843964 4
button 13599 1 nouveau
video 18735 1 nouveau
mxm_wmi 12893 1 nouveau
wmi 18673 2 mxm_wmi,nouveau
i2c_algo_bit 13197 1 nouveau
drm_kms_helper 42523 1 nouveau
ttm 71764 1 nouveau
drm 242921 6 ttm,drm_kms_helper,nouveau
i2c_core 30341 5 drm,drm_kms_helper,i2c_algo_bit,nouveau,i2c_nforce2
amd74xx 12833 0
ide_pci_generic 12754 0
ide_core 103594 2 ide_pci_generic,amd74xx
ata_generic 12790 0
pata_acpi 12886 0
pata_amd 13761 0
dmesg:
<span class="formatter-hide">Caché:</span><div class="hide" onclick="bb_hide(this)"><div class="hide2">[ 0.000000] Memory: 1926332K/1965236K available (5726K kernel code, 497K rwdata, 2516K rodata, 740K init, 616K bss, 38904K reserved, 1128008K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xff5b5000 - 0xfffff000 (10536 kB)
pkmap : 0xff200000 - 0xff400000 (2048 kB)
vmalloc : 0xf39fe000 - 0xff1fe000 ( 184 MB)
lowmem : 0xc0000000 - 0xf31fe000 ( 817 MB)
.init : 0xc098b000 - 0xc0a44000 ( 740 kB)
.data : 0xc0697d0c - 0xc098a700 (3018 kB)
.text : 0xc0100000 - 0xc0697d0c (5727 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:8448 nr_irqs:712 16
[ 0.000000] CPU 0 irqstacks, hard=f1006000 soft=f1008000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.010000] tsc: Detected 2100.001 MHz processor
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4200.00 BogoMIPS (lpj=21000010)
[ 0.000006] pid_max: default: 32768 minimum: 301
[ 0.000044] Security Framework initialized
[ 0.000055] TOMOYO Linux initialized
[ 0.000074] Mount-cache hash table entries: 512
[ 0.000315] Initializing cgroup subsys memory
[ 0.000331] Initializing cgroup subsys devices
[ 0.000334] Initializing cgroup subsys freezer
[ 0.000337] Initializing cgroup subsys net_cls
[ 0.000340] Initializing cgroup subsys blkio
[ 0.000364] CPU: Physical Processor ID: 0
[ 0.000365] CPU: Processor Core ID: 0
[ 0.000370] mce: CPU supports 6 MCE banks
[ 0.000378] LVT offset 0 assigned for vector 0xf9
[ 0.000383] process: using AMD E400 aware idle routine
[ 0.000392] Last level iTLB entries: 4KB 512, 2MB 16, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 128, 4MB 64
tlb_flushall_shift: 4
[ 0.000724] Freeing SMP alternatives memory: 36K (c0a44000 - c0a4d000)
[ 0.001831] ACPI: Core revision 20130725
[ 0.010529] ACPI: All ACPI Tables successfully acquired
[ 0.011111] ftrace: allocating 23309 entries in 46 pages
[ 0.021013] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.021593] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.121687] smpboot: CPU0: AMD Phenom(tm) 8450 Triple-Core Processor (fam: 10, model: 02, stepping: 03)
[ 0.232053] Performance Events: AMD PMU driver.
[ 0.232060] ... version: 0
[ 0.232061] ... bit width: 48
[ 0.232062] ... generic registers: 4
[ 0.232064] ... value mask: 0000ffffffffffff
[ 0.232066] ... max period: 00007fffffffffff
[ 0.232067] ... fixed-purpose events: 0
[ 0.232069] ... event mask: 000000000000000f
[ 0.233709] MCE: In-kernel MCE decoding enabled.
[ 0.233844] CPU 1 irqstacks, hard=f1104000 soft=f1106000
[ 0.244305] Initializing CPU#1
[ 0.247026] process: System has AMD C1E enabled
[ 0.247043] process: Switch to broadcast mode on CPU1
[ 0.233847] smpboot: Booting Node 0, Processors # 1
[ 0.247102] CPU 2 irqstacks, hard=f1116000 soft=f1118000
[ 0.247104] # 2 OK
[ 0.257373] Initializing CPU#2
[ 0.260261] Brought up 3 CPUs
[ 0.260264] smpboot: Total of 3 processors activated (12600.00 BogoMIPS)
[ 0.260280] process: Switch to broadcast mode on CPU2
[ 0.262203] process: Switch to broadcast mode on CPU0
[ 0.262398] devtmpfs: initialized
[ 0.262709] PM: Registering ACPI NVS region [mem 0x77f9e000-0x77fdffff] (270336 bytes)
[ 0.263952] xor: measuring software checksum speed
[ 0.357135] pIII_sse : 8304.800 MB/sec
[ 0.457214] prefetch64-sse: 8894.400 MB/sec
[ 0.457218] xor: using function: prefetch64-sse (8894.400 MB/sec)
[ 0.457221] pinctrl core: initialized pinctrl subsystem
[ 0.457323] RTC time: 11:19:34, date: 03/29/14
[ 0.457375] NET: Registered protocol family 16
[ 0.457478] cpuidle: using governor ladder
[ 0.457480] cpuidle: using governor menu
[ 0.457486] node 0 link 0: io port [1000, ffffff]
[ 0.457489] node 0 link 0: io port [1000, 1fff]
[ 0.457492] TOM: 0000000080000000 aka 2048M
[ 0.457495] Fam 10h mmconf [mem 0xe0000000-0xefffffff]
[ 0.457498] node 0 link 0: mmio [e0000000, efffffff] ==> none
[ 0.457502] node 0 link 0: mmio [a0000, bffff]
[ 0.457505] node 0 link 0: mmio [80000000, fe0bffff] ==> [80000000, dfffffff] and [f0000000, fe0bffff]
[ 0.457510] bus: [bus 00-07] on node 0 link 0
[ 0.457512] bus: 00 [io 0x0000-0xffff]
[ 0.457514] bus: 00 [mem 0x000a0000-0x000bffff]
[ 0.457515] bus: 00 [mem 0x80000000-0xdfffffff]
[ 0.457517] bus: 00 [mem 0xf0000000-0xfcffffffff]
[ 0.457578] ACPI: bus type PCI registered
[ 0.457580] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.457642] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.457645] PCI: not using MMCONFIG
[ 0.458321] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[ 0.458411] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
[ 0.458413] PCI: Using configuration type 1 for base access
[ 0.458414] PCI: Using configuration type 1 for extended access
[ 0.458537] mtrr: your CPUs had inconsistent fixed MTRR settings
[ 0.458539] mtrr: probably your BIOS does not setup all CPUs.
[ 0.458540] mtrr: corrected configuration.
[ 0.459350] bio: create slab <bio-0> at 0
[ 0.627368] raid6: mmxx1 1750 MB/s
[ 0.797485] raid6: mmxx2 3273 MB/s
[ 0.967693] raid6: sse1x1 493 MB/s
[ 1.137801] raid6: sse1x2 940 MB/s
[ 1.307934] raid6: sse2x1 1030 MB/s
[ 1.478020] raid6: sse2x2 2084 MB/s
[ 1.648181] raid6: int32x1 883 MB/s
[ 1.818320] raid6: int32x2 870 MB/s
[ 1.988449] raid6: int32x4 792 MB/s
[ 2.158544] raid6: int32x8 618 MB/s
[ 2.158546] raid6: using algorithm mmxx2 (3273 MB/s)
[ 2.158548] raid6: using intx1 recovery algorithm
[ 2.158607] ACPI: Added _OSI(Module Device)
[ 2.158609] ACPI: Added _OSI(Processor Device)
[ 2.158611] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 2.158613] ACPI: Added _OSI(Processor Aggregator Device)
[ 2.160173] ACPI: EC: Look up EC in DSDT
[ 2.162177] ACPI: Executed 1 blocks of module-level executable AML code
[ 2.166793] ACPI: Interpreter enabled
[ 2.166810] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S2_] (20130725/hwxface-571)
[ 2.166826] ACPI: (supports S0 S1 S3 S4 S5)
[ 2.166829] ACPI: Using IOAPIC for interrupt routing
[ 2.166858] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 2.168501] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 2.168503] PCI: Using MMCONFIG for extended config space
[ 2.168518] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 2.168704] ACPI: No dock devices found.
[ 2.181822] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 2.182016] acpi PNP0A03:00: Requesting ACPI _OSC control (0x1d)
[ 2.182229] acpi PNP0A03:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0c
[ 2.182231] acpi PNP0A03:00: ACPI _OSC control for PCIe not granted, disabling ASPM
[ 2.182603] PCI host bridge to bus 0000:00
[ 2.182606] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 2.182609] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 2.182612] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 2.182615] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 2.182617] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]
[ 2.182620] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
[ 2.182623] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 2.182658] pci 0000:00:00.0: [10de:0754] type 00 class 0x050000
[ 2.182995] pci 0000:00:01.0: [10de:075c] type 00 class 0x060100
[ 2.183004] pci 0000:00:01.0: reg 0x10: [io 0x0900-0x09ff]
[ 2.183107] pci 0000:00:01.1: [10de:0752] type 00 class 0x0c0500
[ 2.183120] pci 0000:00:01.1: reg 0x10: [io 0x0e00-0x0e3f]
[ 2.183139] pci 0000:00:01.1: reg 0x20: [io 0x0600-0x063f]
[ 2.183145] pci 0000:00:01.1: reg 0x24: [io 0x0700-0x073f]
[ 2.183178] pci 0000:00:01.1: PME# supported from D3hot D3cold
[ 2.183236] pci 0000:00:01.1: System wakeup disabled by ACPI
[ 2.183266] pci 0000:00:01.2: [10de:0751] type 00 class 0x050000
[ 2.183371] pci 0000:00:01.3: [10de:0753] type 00 class 0x0b4000
[ 2.183389] pci 0000:00:01.3: reg 0x10: [mem 0xfce80000-0xfcefffff]
[ 2.183564] pci 0000:00:01.4: [10de:0568] type 00 class 0x050000
[ 2.183687] pci 0000:00:02.0: [10de:077b] type 00 class 0x0c0310
[ 2.183697] pci 0000:00:02.0: reg 0x10: [mem 0xfce7e000-0xfce7efff]
[ 2.183738] pci 0000:00:02.0: supports D1 D2
[ 2.183741] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.183792] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 2.183828] pci 0000:00:02.1: [10de:077c] type 00 class 0x0c0320
[ 2.183840] pci 0000:00:02.1: reg 0x10: [mem 0xfce7fc00-0xfce7fcff]
[ 2.183889] pci 0000:00:02.1: supports D1 D2
[ 2.183891] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.183946] pci 0000:00:02.1: System wakeup disabled by ACPI
[ 2.183983] pci 0000:00:04.0: [10de:077d] type 00 class 0x0c0310
[ 2.183993] pci 0000:00:04.0: reg 0x10: [mem 0xfce7d000-0xfce7dfff]
[ 2.184034] pci 0000:00:04.0: supports D1 D2
[ 2.184036] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.184087] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 2.184120] pci 0000:00:04.1: [10de:077e] type 00 class 0x0c0320
[ 2.184133] pci 0000:00:04.1: reg 0x10: [mem 0xfce7f800-0xfce7f8ff]
[ 2.184182] pci 0000:00:04.1: supports D1 D2
[ 2.184184] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.184237] pci 0000:00:04.1: System wakeup disabled by ACPI
[ 2.184281] pci 0000:00:06.0: [10de:0759] type 00 class 0x01018a
[ 2.184307] pci 0000:00:06.0: reg 0x20: [io 0xffa0-0xffaf]
[ 2.184406] pci 0000:00:07.0: [10de:0774] type 00 class 0x040300
[ 2.184419] pci 0000:00:07.0: reg 0x10: [mem 0xfce78000-0xfce7bfff]
[ 2.184469] pci 0000:00:07.0: PME# supported from D3hot D3cold
[ 2.184523] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 2.184558] pci 0000:00:08.0: [10de:075a] type 01 class 0x060401
[ 2.184646] pci 0000:00:08.0: System wakeup disabled by ACPI
[ 2.184678] pci 0000:00:09.0: [10de:0ad0] type 00 class 0x010185
[ 2.184689] pci 0000:00:09.0: reg 0x10: [io 0xc480-0xc487]
[ 2.184695] pci 0000:00:09.0: reg 0x14: [io 0xc400-0xc403]
[ 2.184700] pci 0000:00:09.0: reg 0x18: [io 0xc080-0xc087]
[ 2.184706] pci 0000:00:09.0: reg 0x1c: [io 0xc000-0xc003]
[ 2.184711] pci 0000:00:09.0: reg 0x20: [io 0xbc00-0xbc0f]
[ 2.184717] pci 0000:00:09.0: reg 0x24: [mem 0xfce76000-0xfce77fff]
[ 2.184817] pci 0000:00:0a.0: [10de:0760] type 00 class 0x020000
[ 2.184830] pci 0000:00:0a.0: reg 0x10: [mem 0xfce7c000-0xfce7cfff]
[ 2.184835] pci 0000:00:0a.0: reg 0x14: [io 0xb880-0xb887]
[ 2.184841] pci 0000:00:0a.0: reg 0x18: [mem 0xfce7f400-0xfce7f4ff]
[ 2.184847] pci 0000:00:0a.0: reg 0x1c: [mem 0xfce7f000-0xfce7f00f]
[ 2.184883] pci 0000:00:0a.0: supports D1 D2
[ 2.184885] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.184940] pci 0000:00:0a.0: System wakeup disabled by ACPI
[ 2.184974] pci 0000:00:0b.0: [10de:0569] type 01 class 0x060400
[ 2.185007] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.185131] pci 0000:00:10.0: [10de:0778] type 01 class 0x060400
[ 2.185348] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.185441] pci 0000:00:10.0: System wakeup disabled by ACPI
[ 2.185516] pci 0000:00:12.0: [10de:075b] type 01 class 0x060400
[ 2.185732] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.185825] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 2.185901] pci 0000:00:13.0: [10de:077a] type 01 class 0x060400
[ 2.186131] pci 0000:00:13.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.186225] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 2.186259] pci 0000:00:18.0: [1022:1200] type 00 class 0x060000
[ 2.186341] pci 0000:00:18.1: [1022:1201] type 00 class 0x060000
[ 2.186412] pci 0000:00:18.2: [1022:1202] type 00 class 0x060000
[ 2.186489] pci 0000:00:18.3: [1022:1203] type 00 class 0x060000
[ 2.186571] pci 0000:00:18.4: [1022:1204] type 00 class 0x060000
[ 2.186695] pci 0000:01:06.0: [1106:3038] type 00 class 0x0c0300
[ 2.186733] pci 0000:01:06.0: reg 0x20: [io 0xd880-0xd89f]
[ 2.186768] pci 0000:01:06.0: supports D1 D2
[ 2.186770] pci 0000:01:06.0: PME# supported from D0 D1 D2 D3hot
[ 2.186808] pci 0000:01:06.1: [1106:3038] type 00 class 0x0c0300
[ 2.186846] pci 0000:01:06.1: reg 0x20: [io 0xdc00-0xdc1f]
[ 2.186880] pci 0000:01:06.1: supports D1 D2
[ 2.186883] pci 0000:01:06.1: PME# supported from D0 D1 D2 D3hot
[ 2.186921] pci 0000:01:06.2: [1106:3104] type 00 class 0x0c0320
[ 2.186935] pci 0000:01:06.2: reg 0x10: [mem 0xfcfffc00-0xfcfffcff]
[ 2.186993] pci 0000:01:06.2: supports D1 D2
[ 2.186995] pci 0000:01:06.2: PME# supported from D0 D1 D2 D3hot
[ 2.187056] pci 0000:00:08.0: PCI bridge to [bus 01] (subtractive decode)
[ 2.187060] pci 0000:00:08.0: bridge window [io 0xd000-0xdfff]
[ 2.187064] pci 0000:00:08.0: bridge window [mem 0xfcf00000-0xfcffffff]
[ 2.187067] pci 0000:00:08.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 2.187070] pci 0000:00:08.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 2.187073] pci 0000:00:08.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 2.187075] pci 0000:00:08.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
[ 2.187078] pci 0000:00:08.0: bridge window [mem 0x80000000-0xdfffffff] (subtractive decode)
[ 2.187080] pci 0000:00:08.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 2.187125] pci 0000:02:00.0: [10de:0848] type 00 class 0x030000
[ 2.187134] pci 0000:02:00.0: reg 0x10: [mem 0xfd000000-0xfdffffff]
[ 2.187142] pci 0000:02:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
[ 2.187149] pci 0000:02:00.0: reg 0x1c: [mem 0xfa000000-0xfbffffff 64bit pref]
[ 2.187155] pci 0000:02:00.0: reg 0x24: [io 0xec00-0xec7f]
[ 2.187161] pci 0000:02:00.0: reg 0x30: [mem 0xfeae0000-0xfeafffff pref]
[ 2.187218] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 2.187230] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 2.187234] pci 0000:00:0b.0: bridge window [mem 0xfd000000-0xfeafffff]
[ 2.187238] pci 0000:00:0b.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
[ 2.187407] pci 0000:00:10.0: PCI bridge to [bus 03]
[ 2.187605] pci 0000:00:12.0: PCI bridge to [bus 04]
[ 2.187818] pci 0000:05:00.0: [197b:2380] type 00 class 0x0c0010
[ 2.187837] pci 0000:05:00.0: reg 0x10: [mem 0xfebff800-0xfebfffff]
[ 2.187852] pci 0000:05:00.0: reg 0x14: [mem 0xfebff400-0xfebff47f]
[ 2.187890] pci 0000:05:00.0: reg 0x20: [mem 0xfebff000-0xfebff07f]
[ 2.187905] pci 0000:05:00.0: reg 0x24: [mem 0xfebfec00-0xfebfec7f]
[ 2.198757] pci 0000:00:13.0: PCI bridge to [bus 05]
[ 2.198777] pci 0000:00:13.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 2.198836] pci_bus 0000:00: on NUMA node 0
[ 2.200091] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
[ 2.200216] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *15
[ 2.200337] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *11
[ 2.200455] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 2.200575] ACPI: PCI Interrupt Link [LN0A] (IRQs 16 17 18 19) *10
[ 2.200696] ACPI: PCI Interrupt Link [LN0B] (IRQs 16 17 18 19) *0, disabled.
[ 2.200821] ACPI: PCI Interrupt Link [LN0C] (IRQs 16 17 18 19) *0, disabled.
[ 2.200945] ACPI: PCI Interrupt Link [LN0D] (IRQs 16 17 18 19) *0, disabled.
[ 2.201063] ACPI: PCI Interrupt Link [LN1A] (IRQs 16 17 18 19) *0, disabled.
[ 2.201181] ACPI: PCI Interrupt Link [LN1B] (IRQs 16 17 18 19) *0, disabled.
[ 2.201299] ACPI: PCI Interrupt Link [LN1C] (IRQs 16 17 18 19) *0, disabled.
[ 2.201420] ACPI: PCI Interrupt Link [LN1D] (IRQs 16 17 18 19) *0, disabled.
[ 2.201540] ACPI: PCI Interrupt Link [LN2A] (IRQs 16 17 18 19) *11
[ 2.201658] ACPI: PCI Interrupt Link [LN2B] (IRQs 16 17 18 19) *0, disabled.
[ 2.201776] ACPI: PCI Interrupt Link [LN2C] (IRQs 16 17 18 19) *0, disabled.
[ 2.201895] ACPI: PCI Interrupt Link [LN2D] (IRQs 16 17 18 19) *0, disabled.
[ 2.202020] ACPI: PCI Interrupt Link [LN3A] (IRQs 16 17 18 19) *15
[ 2.202138] ACPI: PCI Interrupt Link [LN3B] (IRQs 16 17 18 19) *0, disabled.
[ 2.202258] ACPI: PCI Interrupt Link [LN3C] (IRQs 16 17 18 19) *0, disabled.
[ 2.202376] ACPI: PCI Interrupt Link [LN3D] (IRQs 16 17 18 19) *0, disabled.
[ 2.202498] ACPI: PCI Interrupt Link [LN4A] (IRQs 16 17 18 19) *0, disabled.
[ 2.202616] ACPI: PCI Interrupt Link [LN4B] (IRQs 16 17 18 19) *0, disabled.
[ 2.202734] ACPI: PCI Interrupt Link [LN4C] (IRQs 16 17 18 19) *0, disabled.
[ 2.202853] ACPI: PCI Interrupt Link [LN4D] (IRQs 16 17 18 19) *0, disabled.
[ 2.202974] ACPI: PCI Interrupt Link [LN5A] (IRQs 16 17 18 19) *0, disabled.
[ 2.203095] ACPI: PCI Interrupt Link [LN5B] (IRQs 16 17 18 19) *0, disabled.
[ 2.203220] ACPI: PCI Interrupt Link [LN5C] (IRQs 16 17 18 19) *0, disabled.
[ 2.203341] ACPI: PCI Interrupt Link [LN5D] (IRQs 16 17 18 19) *0, disabled.
[ 2.203463] ACPI: PCI Interrupt Link [LN6A] (IRQs 16 17 18 19) *0, disabled.
[ 2.203584] ACPI: PCI Interrupt Link [LN6B] (IRQs 16 17 18 19) *0, disabled.
[ 2.203706] ACPI: PCI Interrupt Link [LN6C] (IRQs 16 17 18 19) *0, disabled.
[ 2.203824] ACPI: PCI Interrupt Link [LN6D] (IRQs 16 17 18 19) *0, disabled.
[ 2.203946] ACPI: PCI Interrupt Link [LN7A] (IRQs 16 17 18 19) *0, disabled.
[ 2.204070] ACPI: PCI Interrupt Link [LN7B] (IRQs 16 17 18 19) *0, disabled.
[ 2.204192] ACPI: PCI Interrupt Link [LN7C] (IRQs 16 17 18 19) *0, disabled.
[ 2.204314] ACPI: PCI Interrupt Link [LN7D] (IRQs 16 17 18 19) *0, disabled.
[ 2.204444] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 2.204568] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 2.204690] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *10
[ 2.204815] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10
[ 2.204938] ACPI: PCI Interrupt Link [SGRU] (IRQs 20 21 22 23) *10
[ 2.205062] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *15
[ 2.205184] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *11
[ 2.205307] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *5
[ 2.205440] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 2.205560] ACPI: PCI Interrupt Link [UB11] (IRQs 20 21 22 23) *15
[ 2.205681] ACPI: PCI Interrupt Link [UB12] (IRQs 20 21 22 23) *11
[ 2.205790] ACPI: Enabled 1 GPEs in block 00 to 1F
[ 2.205798] ACPI: _SB_.PCI0: notify handler is installed
[ 2.205863] Found 1 acpi root devices
[ 2.205969] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.205970] vgaarb: loaded
[ 2.205972] vgaarb: bridge control possible 0000:02:00.0
[ 2.205977] sta2x11_scr_init
[ 2.205983] sta2x11_apb_soc_regs_init
[ 2.205990] sta2x11_sctl_init
[ 2.205995] sta2x11_apbreg_init
[ 2.206097] SCSI subsystem initialized
[ 2.206149] libata version 3.00 loaded.
[ 2.206283] PCI: Using ACPI for IRQ routing
[ 2.206289] PCI: pci_cache_line_size set to 64 bytes
[ 2.206365] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 2.206368] e820: reserve RAM buffer [mem 0x77f90000-0x77ffffff]
[ 2.206465] NetLabel: Initializing
[ 2.206466] NetLabel: domain hash size = 128
[ 2.206468] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.206480] NetLabel: unlabeled traffic allowed by default
[ 2.206528] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 2.206534] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31
[ 2.206539] hpet0: 3 comparators, 32-bit 25.000000 MHz counter
[ 2.208644] Switched to clocksource hpet
[ 2.215316] pnp: PnP ACPI init
[ 2.215335] ACPI: bus type PNP registered
[ 2.215425] pnp 00:00: [dma 4]
[ 2.215453] pnp 00:00: Plug and Play ACPI device, IDs PNP0200 (active)
[ 2.215480] pnp 00:01: Plug and Play ACPI device, IDs PNP0800 (active)
[ 2.215521] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 2.216148] pnp 00:03: [dma 2]
[ 2.216196] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[ 2.216893] pnp 00:04: [dma 0 disabled]
[ 2.217125] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 2.217605] pnp 00:05: disabling [io 0x0900-0x097f] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 2.217608] pnp 00:05: disabling [io 0x0980-0x09ff] because it overlaps 0000:00:01.0 BAR 0 [io 0x0900-0x09ff]
[ 2.217700] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 2.217704] system 00:05: [io 0x0800-0x080f] has been reserved
[ 2.217707] system 00:05: [io 0x0500-0x057f] could not be reserved
[ 2.217710] system 00:05: [io 0x0580-0x05ff] has been reserved
[ 2.217713] system 00:05: [io 0x0800-0x087f] could not be reserved
[ 2.217716] system 00:05: [io 0x0880-0x08ff] has been reserved
[ 2.217718] system 00:05: [io 0x0d00-0x0d7f] has been reserved
[ 2.217721] system 00:05: [io 0x0d80-0x0dff] has been reserved
[ 2.217725] system 00:05: [mem 0x000d0000-0x000d3fff window] has been reserved
[ 2.217728] system 00:05: [mem 0x000d4000-0x000d7fff window] has been reserved
[ 2.217731] system 00:05: [mem 0x000de000-0x000dffff window] has been reserved
[ 2.217735] system 00:05: [mem 0xfed04000-0xfed04fff] has been reserved
[ 2.217738] system 00:05: [mem 0xfee01000-0xfeefffff] has been reserved
[ 2.217742] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.217895] pnp 00:06: Plug and Play ACPI device, IDs PNP0103 (active)
[ 2.217934] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.218087] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 2.218090] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[ 2.218093] system 00:08: [mem 0x78000000-0x7fffffff] has been reserved
[ 2.218096] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.218160] pnp 00:09: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 2.218453] system 00:0a: [io 0x0230-0x023f] has been reserved
[ 2.218456] system 00:0a: [io 0x0290-0x029f] has been reserved
[ 2.218459] system 00:0a: [io 0x0a00-0x0a0f] has been reserved
[ 2.218462] system 00:0a: [io 0x0a10-0x0a1f] has been reserved
[ 2.218465] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.219032] pnp 00:0b: [dma 0 disabled]
[ 2.219096] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 2.219184] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved
[ 2.219187] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.219418] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
[ 2.219425] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved
[ 2.219428] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved
[ 2.219431] system 00:0d: [mem 0x00100000-0x7fffffff] could not be reserved
[ 2.219434] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved
[ 2.219437] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.220256] pnp: PnP ACPI: found 14 devices
[ 2.220258] ACPI: bus type PNP unregistered
[ 2.220259] PnPBIOS: Disabled
[ 2.257579] pci 0000:00:08.0: PCI bridge to [bus 01]
[ 2.257584] pci 0000:00:08.0: bridge window [io 0xd000-0xdfff]
[ 2.257588] pci 0000:00:08.0: bridge window [mem 0xfcf00000-0xfcffffff]
[ 2.257595] pci 0000:00:0b.0: PCI bridge to [bus 02]
[ 2.257598] pci 0000:00:0b.0: bridge window [io 0xe000-0xefff]
[ 2.257601] pci 0000:00:0b.0: bridge window [mem 0xfd000000-0xfeafffff]
[ 2.257605] pci 0000:00:0b.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]
[ 2.257609] pci 0000:00:10.0: PCI bridge to [bus 03]
[ 2.257635] pci 0000:00:12.0: PCI bridge to [bus 04]
[ 2.257662] pci 0000:00:13.0: PCI bridge to [bus 05]
[ 2.257672] pci 0000:00:13.0: bridge window [mem 0xfeb00000-0xfebfffff]
[ 2.257691] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.257694] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.257697] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.257699] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
[ 2.257702] pci_bus 0000:00: resource 8 [mem 0x80000000-0xdfffffff]
[ 2.257704] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 2.257707] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
[ 2.257709] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
[ 2.257712] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 2.257714] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 2.257717] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.257719] pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000dffff]
[ 2.257722] pci_bus 0000:01: resource 8 [mem 0x80000000-0xdfffffff]
[ 2.257724] pci_bus 0000:01: resource 9 [mem 0xf0000000-0xfebfffff]
[ 2.257727] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 2.257729] pci_bus 0000:02: resource 1 [mem 0xfd000000-0xfeafffff]
[ 2.257732] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xfbffffff 64bit pref]
[ 2.257735] pci_bus 0000:05: resource 1 [mem 0xfeb00000-0xfebfffff]
[ 2.257803] NET: Registered protocol family 2
[ 2.258007] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.258051] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.258093] TCP: Hash tables configured (established 8192 bind 8192)
[ 2.258127] TCP: reno registered
[ 2.258130] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.258141] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.258217] NET: Registered protocol family 1
[ 2.258626] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 23
[ 2.349539] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22
[ 2.349962] ACPI: PCI Interrupt Link [UB11] enabled at IRQ 21
[ 2.429520] ACPI: PCI Interrupt Link [UB12] enabled at IRQ 20
[ 2.429756] pci 0000:00:07.0: Enabling HT MSI Mapping
[ 2.429861] pci 0000:00:08.0: Enabling HT MSI Mapping
[ 2.429971] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 2.430089] pci 0000:00:0a.0: Enabling HT MSI Mapping
[ 2.430206] pci 0000:00:0b.0: Enabling HT MSI Mapping
[ 2.430393] pci 0000:00:08.0: setting latency timer to 64
[ 2.430604] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
[ 2.430861] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18
[ 2.431122] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17
[ 2.431184] pci 0000:02:00.0: Boot video device
[ 2.431190] PCI: CLS 64 bytes, default 64
[ 2.431242] Trying to unpack rootfs image as initramfs...
[ 2.590215] Freeing initrd memory: 8352K (f29d0000 - f31f8000)
[ 2.590222] sta2x11_mfd_init
[ 2.590417] LVT offset 1 assigned for vector 0x400
[ 2.590425] IBS: LVT offset 1 assigned
[ 2.590454] perf: AMD IBS detected (0x00000007)
[ 2.590472] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 2.590473] apm: disabled - APM is not SMP safe.
[ 2.590835] audit: initializing netlink socket (disabled)
[ 2.590846] type=2000 audit(1396091975.490:1): initialized
[ 2.614396] bounce pool size: 64 pages
[ 2.614413] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.614664] zbud: loaded
[ 2.614785] VFS: Disk quotas dquot_6.5.2
[ 2.614818] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.615116] bio: create slab <bio-1> at 1
[ 2.615263] Btrfs loaded
[ 2.615272] msgmni has been set to 1575
[ 2.615794] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.615843] io scheduler noop registered
[ 2.615845] io scheduler deadline registered
[ 2.615864] io scheduler cfq registered (default)
[ 2.616307] ACPI: PCI Interrupt Link [LN0A] enabled at IRQ 16
[ 2.616718] ACPI: PCI Interrupt Link [LN2A] enabled at IRQ 19
[ 2.617106] ACPI: PCI Interrupt Link [LN3A] enabled at IRQ 18
[ 2.617236] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.617253] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.624403] Console: switching to colour frame buffer device 100x37
[ 2.631261] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[ 2.631330] GHES: HEST is not enabled!
[ 2.631404] isapnp: Scanning for PnP cards...
[ 2.631423] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.652071] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.652614] Linux agpgart interface v0.103
[ 2.654302] brd: module loaded
[ 2.654423] ahci 0000:00:09.0: version 3.0
[ 2.654741] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 2.654780] ahci 0000:00:09.0: irq 40 for MSI/MSI-X
[ 2.654791] ahci 0000:00:09.0: controller can't do PMP, turning off CAP_PMP
[ 2.654858] ahci 0000:00:09.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl IDE mode
[ 2.654863] ahci 0000:00:09.0: flags: 64bit ncq sntf led clo pio boh
[ 2.654867] ahci 0000:00:09.0: setting latency timer to 64
[ 2.655631] scsi0 : ahci
[ 2.655735] scsi1 : ahci
[ 2.655815] scsi2 : ahci
[ 2.655892] scsi3 : ahci
[ 2.655965] scsi4 : ahci
[ 2.656044] scsi5 : ahci
[ 2.656089] ata1: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76100 irq 40
[ 2.656091] ata2: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76180 irq 40
[ 2.656094] ata3: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76200 irq 40
[ 2.656096] ata4: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76280 irq 40
[ 2.656098] ata5: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76300 irq 40
[ 2.656100] ata6: SATA max UDMA/133 abar m8192@0xfce76000 port 0xfce76380 irq 40
[ 2.656194] i8042: PNP: PS/2 Controller [PNP0303
S2K] at 0x60,0x64 irq 1[ 2.656196] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 2.656367] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.656487] mousedev: PS/2 mouse device common for all mice
[ 2.656594] rtc_cmos 00:07: RTC can wake from S4
[ 2.656868] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 2.656932] rtc_cmos 00:07: alarms up to one year, y3k, 114 bytes nvram, hpet irqs
[ 2.656948] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.657047] TCP: cubic registered
[ 2.657057] Key type dns_resolver registered
[ 2.657220] Using IPI No-Shortcut mode
[ 2.657328] registered taskstats version 1
[ 2.657941] Magic number: 6:597:328
[ 2.658087] rtc_cmos 00:07: setting system clock to 2014-03-29 11:19:36 UTC (1396091976)
[ 2.658089] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
[ 2.658179] PM: Checking hibernation image partition UUID=f223fd29-7764-4d6e-964f-a3ad825d13ba
[ 2.672929] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.988284] isapnp: No Plug & Play device found
[ 2.989354] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.990750] ata2.00: ATA-8: ST3500418AS, CC38, max UDMA/133
[ 2.990753] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.992481] ata2.00: configured for UDMA/133
[ 2.999567] ata4: SATA link down (SStatus 0 SControl 300)
[ 3.009363] ata3: SATA link down (SStatus 0 SControl 300)
[ 3.009383] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.010424] ata1.00: ATA-8: Hitachi HDP725025GLA380, GM2OA5CA, max UDMA/133
[ 3.010427] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.011807] ata1.00: configured for UDMA/133
[ 3.011973] scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72502 GM2O PQ: 0 ANSI: 5
[ 3.012126] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 3.012231] scsi 1:0:0:0: Direct-Access ATA ST3500418AS CC38 PQ: 0 ANSI: 5
[ 3.012258] sd 0:0:0:0: [sda] Write Protect is off
[ 3.012262] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.012306] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.012347] sd 1:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 3.012410] sd 1:0:0:0: [sdb] Write Protect is off
[ 3.012413] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 3.012450] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.019505] ata6: SATA link down (SStatus 0 SControl 300)
[ 3.019518] ata5: SATA link down (SStatus 0 SControl 300)
[ 3.042372] sda: sda1 sda2 < sda5 >
[ 3.042796] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.121908] sdb: sdb1 sdb2 < sdb5 sdb6 sdb7 sdb8 sdb9 sdb10 >
[ 3.122514] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 3.122529] PM: Hibernation image not present or could not be loaded.
[ 3.122959] Freeing unused kernel memory: 740K (c098b000 - c0a44000)
[ 3.123043] Write protecting the kernel text: 5728k
[ 3.123122] Write protecting the kernel read-only data: 2520k
[ 3.123124] NX-protecting the kernel data: 5536k
[ 3.177512] dracut: dracut-034
[ 3.191296] pata_amd 0000:00:06.0: version 0.4.1
[ 3.191339] pata_amd 0000:00:06.0: setting latency timer to 64
[ 3.192276] scsi6 : pata_amd
[ 3.192345] scsi7 : pata_amd
[ 3.192376] ata7: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 3.192378] ata8: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 3.369909] ata7.00: ATAPI: HL-DT-ST DVDRAM GSA-4165B, DL03, max UDMA/33
[ 3.369918] ata7: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:900:0x11)
[ 3.410187] ata7.00: configured for UDMA/33
[ 3.417009] scsi 6:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-4165B DL03 PQ: 0 ANSI: 5
[ 3.417199] ata8: port disabled--ignoring
[ 3.432698] Uniform Multi-Platform E-IDE driver
[ 3.533698] systemd-udevd[205]: starting version 208
[ 3.583707] [drm] Initialized drm 1.1.0 20060810
[ 3.589774] tsc: Refined TSC clocksource calibration: 2100.000 MHz
[ 3.594580] wmi: Mapper loaded
[ 3.596600] [Firmware Bug]: ACPI(IGPU) defines _DOD but not _DOS
[ 3.596749] ACPI: Video Device [IGPU] (multi-head: yes rom: no post: no)
[ 3.596801] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input1
[ 3.597695] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 3.597699] ACPI: Power Button [PWRB]
[ 3.597764] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.597767] ACPI: Power Button [PWRF]
[ 3.648417] MXM: GUID detected in BIOS
[ 3.648446] ACPI Warning: _SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Integer], ACPI requires [Package] (20130725/nsarguments-95)
[ 3.648506] ACPI Warning: _SB_.PCI0.IXVE.IGPU._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20130725/nsarguments-95)
[ 3.648548] checking generic (fb000000 eb000) vs hw (f0000000 8000000)
[ 3.648550] checking generic (fb000000 eb000) vs hw (fa000000 2000000)
[ 3.648552] fb: conflicting fb hw usage nouveaufb vs simple - removing generic driver
[ 3.648571] Console: switching to colour dummy device 80x25
[ 3.648679] nouveau 0000:02:00.0: setting latency timer to 64
[ 3.648688] pci 0000:00:0b.0: setting latency timer to 64
[ 3.648926] ACPI: PCI Interrupt Link [SGRU] enabled at IRQ 22
[ 3.649089] [drm] hdmi device not found 2 0 1
[ 3.649183] nouveau [ DEVICE][0000:02:00.0] BOOT0 : 0x0aa400a2
[ 3.649186] nouveau [ DEVICE][0000:02:00.0] Chipset: MCP77/MCP78 (NVAA)
[ 3.649189] nouveau [ DEVICE][0000:02:00.0] Family : NV50
[ 3.650275] nouveau [ VBIOS][0000:02:00.0] checking PRAMIN for image...
[ 3.697587] nouveau [ VBIOS][0000:02:00.0] ... appears to be valid
[ 3.697589] nouveau [ VBIOS][0000:02:00.0] using image from PRAMIN
[ 3.697744] nouveau [ VBIOS][0000:02:00.0] BIT signature found
[ 3.697751] nouveau [ VBIOS][0000:02:00.0] version 62.77.2f.00.00
[ 3.718034] nouveau [ PFB][0000:02:00.0] RAM type: stolen system memory
[ 3.718037] nouveau [ PFB][0000:02:00.0] RAM size: 128 MiB
[ 3.718039] nouveau [ PFB][0000:02:00.0] ZCOMP: 0 tags
[ 4.657995] Switched to clocksource tsc
[ 5.272418] nouveau [ PTHERM][0000:02:00.0] FAN control: none / external
[ 5.272434] nouveau [ PTHERM][0000:02:00.0] fan management: disabled
[ 5.272438] nouveau [ PTHERM][0000:02:00.0] internal sensor: yes
[ 5.272559] [TTM] Zone kernel: Available graphics memory: 403726 kiB
[ 5.272562] [TTM] Zone highmem: Available graphics memory: 967730 kiB
[ 5.272564] [TTM] Initializing pool allocator
[ 5.272570] [TTM] Initializing DMA pool allocator
[ 5.272584] nouveau [ DRM] VRAM: 128 MiB
[ 5.272587] nouveau [ DRM] GART: 1048576 MiB
[ 5.272591] nouveau [ DRM] TMDS table version 2.0
[ 5.272594] nouveau [ DRM] DCB version 4.0
[ 5.272597] nouveau [ DRM] DCB outp 00: 01000300 0000001e
[ 5.272600] nouveau [ DRM] DCB outp 01: 01011332 00020010
[ 5.272602] nouveau [ DRM] DCB conn 00: 00000000
[ 5.272605] nouveau [ DRM] DCB conn 01: 00003161
[ 5.282706] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 5.282707] [drm] No driver support for vblank timestamp query.
[ 5.294727] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00020002 FAULT at 0x100220
[ 5.330730] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x10022c
[ 5.342729] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x100230
[ 5.366726] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x100238
[ 5.378726] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x10023c
[ 5.414720] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x100228
[ 5.426721] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x1002c4
[ 5.450719] nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x1002e4
[ 5.450722] nouveau [ DRM] 1 available performance level(s)
[ 5.450726] nouveau [ DRM] 0: core 500MHz shader 1500MHz voltage 1100mV fanspeed 100%
[ 5.450729] nouveau [ DRM] c:
[ 5.463346] nouveau [ DRM] MM: using M2MF for buffer copies
[ 5.493503] nouveau [ DRM] allocated 1280x1024 fb: 0x50000, bo f2eb0c00
[ 5.493588] fbcon: nouveaufb (fb0) is primary device
[ 5.564134] Console: switching to colour frame buffer device 160x64
[ 5.565434] nouveau 0000:02:00.0: fb0: nouveaufb frame buffer device
[ 5.565436] nouveau 0000:02:00.0: registered panic notifier
[ 5.565443] [drm] Initialized nouveau 1.1.1 20120801 for 0000:02:00.0 on minor 0
[ 5.568244] dracut: Starting plymouth daemon
[ 10.440518] ACPI: bus type USB registered
[ 10.440552] usbcore: registered new interface driver usbfs
[ 10.440563] usbcore: registered new interface driver hub
[ 10.440617] usbcore: registered new device driver usb
[ 10.443248] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 10.443868] ohci-pci: OHCI PCI platform driver
[ 10.444074] ohci-pci 0000:00:02.0: setting latency timer to 64
[ 10.444078] ohci-pci 0000:00:02.0: OHCI PCI host controller
[ 10.444087] ohci-pci 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 10.444123] ohci-pci 0000:00:02.0: irq 23, io mem 0xfce7e000
[ 10.449331] uhci_hcd: USB Universal Host Controller Interface driver
[ 10.449458] uhci_hcd 0000:01:06.0: UHCI Host Controller
[ 10.449465] uhci_hcd 0000:01:06.0: new USB bus registered, assigned bus number 2
[ 10.449510] uhci_hcd 0000:01:06.0: irq 19, io base 0x0000d880
[ 10.449588] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.449591] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.449593] usb usb2: Product: UHCI Host Controller
[ 10.449595] usb usb2: Manufacturer: Linux 3.12.13-server-2.mga4 uhci_hcd
[ 10.449597] usb usb2: SerialNumber: 0000:01:06.0
[ 10.449730] hub 2-0:1.0: USB hub found
[ 10.449739] hub 2-0:1.0: 2 ports detected
[ 10.449884] uhci_hcd 0000:01:06.1: UHCI Host Controller
[ 10.449890] uhci_hcd 0000:01:06.1: new USB bus registered, assigned bus number 3
[ 10.449923] uhci_hcd 0000:01:06.1: irq 18, io base 0x0000dc00
[ 10.449980] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.449983] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.449985] usb usb3: Product: UHCI Host Controller
[ 10.449987] usb usb3: Manufacturer: Linux 3.12.13-server-2.mga4 uhci_hcd
[ 10.449989] usb usb3: SerialNumber: 0000:01:06.1
[ 10.450075] hub 3-0:1.0: USB hub found
[ 10.450082] hub 3-0:1.0: 2 ports detected
[ 10.453961] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 10.453966] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[ 10.454139] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 10.454145] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 10.454273] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 10.454769] ehci-pci: EHCI PCI platform driver
[ 10.476268] pcieport 0000:00:13.0: driver skip pci_set_master, fix it!
[ 10.497256] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.497263] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.497266] usb usb1: Product: OHCI PCI host controller
[ 10.497269] usb usb1: Manufacturer: Linux 3.12.13-server-2.mga4 ohci_hcd
[ 10.497271] usb usb1: SerialNumber: 0000:00:02.0
[ 10.497464] hub 1-0:1.0: USB hub found
[ 10.497476] hub 1-0:1.0: 6 ports detected
[ 10.497904] ohci-pci 0000:00:04.0: setting latency timer to 64
[ 10.497911] ohci-pci 0000:00:04.0: OHCI PCI host controller
[ 10.497919] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 4
[ 10.497963] ohci-pci 0000:00:04.0: irq 21, io mem 0xfce7d000
[ 10.557344] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.557350] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.557353] usb usb4: Product: OHCI PCI host controller
[ 10.557356] usb usb4: Manufacturer: Linux 3.12.13-server-2.mga4 ohci_hcd
[ 10.557359] usb usb4: SerialNumber: 0000:00:04.0
[ 10.557546] hub 4-0:1.0: USB hub found
[ 10.557567] hub 4-0:1.0: 6 ports detected
[ 10.557991] ehci-pci 0000:00:02.1: setting latency timer to 64
[ 10.558201] ehci-pci 0000:00:02.1: EHCI Host Controller
[ 10.558209] ehci-pci 0000:00:02.1: new USB bus registered, assigned bus number 5
[ 10.558218] ehci-pci 0000:00:02.1: debug port 1
[ 10.558249] ehci-pci 0000:00:02.1: cache line size of 64 is not supported
[ 10.558257] ehci-pci 0000:00:02.1: irq 22, io mem 0xfce7fc00
[ 10.575458] ehci-pci 0000:00:02.1: USB 2.0 started, EHCI 1.00
[ 10.575564] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.575569] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.575572] usb usb5: Product: EHCI Host Controller
[ 10.575575] usb usb5: Manufacturer: Linux 3.12.13-server-2.mga4 ehci_hcd
[ 10.575577] usb usb5: SerialNumber: 0000:00:02.1
[ 10.575717] hub 5-0:1.0: USB hub found
[ 10.575731] hub 5-0:1.0: 6 ports detected
[ 10.595244] firewire_ohci 0000:05:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
[ 10.665404] hub 1-0:1.0: USB hub found
[ 10.665428] hub 1-0:1.0: 6 ports detected
[ 10.665792] ehci-pci 0000:00:04.1: setting latency timer to 64
[ 10.665928] ehci-pci 0000:00:04.1: EHCI Host Controller
[ 10.665935] ehci-pci 0000:00:04.1: new USB bus registered, assigned bus number 6
[ 10.665946] ehci-pci 0000:00:04.1: debug port 1
[ 10.665977] ehci-pci 0000:00:04.1: cache line size of 64 is not supported
[ 10.666010] ehci-pci 0000:00:04.1: irq 20, io mem 0xfce7f800
[ 10.765642] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[ 10.795533] ehci-pci 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 10.795674] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.795679] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.795682] usb usb6: Product: EHCI Host Controller
[ 10.795685] usb usb6: Manufacturer: Linux 3.12.13-server-2.mga4 ehci_hcd
[ 10.795687] usb usb6: SerialNumber: 0000:00:04.1
[ 10.795870] hub 6-0:1.0: USB hub found
[ 10.795888] hub 6-0:1.0: 6 ports detected
[ 10.885756] hub 4-0:1.0: USB hub found
[ 10.885778] hub 4-0:1.0: 6 ports detected
[ 10.975466] usb 3-2: New USB device found, idVendor=05e3, idProduct=0606
[ 10.975470] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 10.975473] usb 3-2: Product: USB Hub 2.0
[ 10.978384] hub 3-2:1.0: USB hub found
[ 10.980639] hub 3-2:1.0: 4 ports detected
[ 10.986481] usb 3-2: USB disconnect, device number 2
[ 10.987808] ehci-pci 0000:01:06.2: EHCI Host Controller
[ 10.987818] ehci-pci 0000:01:06.2: new USB bus registered, assigned bus number 7
[ 10.987885] ehci-pci 0000:01:06.2: irq 17, io mem 0xfcfffc00
[ 11.095888] firewire_core 0000:05:00.0: created device fw0: GUID 001e8c0001b98cfa, S400
[ 11.105822] usb 5-2: new high-speed USB device number 2 using ehci-pci
[ 11.125722] ehci-pci 0000:01:06.2: USB 2.0 started, EHCI 1.00
[ 11.125848] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002
[ 11.125852] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.125855] usb usb7: Product: EHCI Host Controller
[ 11.125858] usb usb7: Manufacturer: Linux 3.12.13-server-2.mga4 ehci_hcd
[ 11.125860] usb usb7: SerialNumber: 0000:01:06.2
[ 11.126023] hub 7-0:1.0: USB hub found
[ 11.126040] hub 7-0:1.0: 4 ports detected
[ 11.155713] hub 2-0:1.0: USB hub found
[ 11.155734] hub 2-0:1.0: 2 ports detected
[ 11.185936] hub 3-0:1.0: USB hub found
[ 11.185949] hub 3-0:1.0: 2 ports detected
[ 11.300302] usb 5-2: New USB device found, idVendor=1bcf, idProduct=0c31
[ 11.300307] usb 5-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 11.300309] usb 5-2: Product: USB to Serial-ATA bridge
[ 11.300312] usb 5-2: Manufacturer: Sunplus Innovation Technology.
[ 11.300314] usb 5-2: SerialNumber: FF3500418A0000000000009FFD6C7B
[ 11.361582] usb-storage 5-2:1.0: USB Mass Storage device detected
[ 11.361671] scsi8 : usb-storage 5-2:1.0
[ 11.361762] usbcore: registered new interface driver usb-storage
[ 11.542621] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[ 11.542628] PM: Basic memory bitmaps created
[ 11.559139] PM: Basic memory bitmaps freed
[ 11.559149] video LNXVIDEO:00: Restoring backlight state
[ 11.561624] PM: Starting manual resume from disk
[ 11.561630] PM: Hibernation image partition 8:24 present
[ 11.561632] PM: Looking for hibernation image.
[ 11.572773] PM: Image not found (code -22)
[ 11.572777] PM: Hibernation image not present or could not be loaded.
[ 11.610962] EXT4-fs (sdb9): INFO: recovery required on readonly filesystem
[ 11.610969] EXT4-fs (sdb9): write access will be enabled during recovery
[ 11.696361] usb 1-3: new low-speed USB device number 2 using ohci-pci
[ 11.921747] usb 1-3: New USB device found, idVendor=15d9, idProduct=0a4c
[ 11.921753] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 11.921756] usb 1-3: Product: USB OPTICAL MOUSE
[ 11.931171] hidraw: raw HID events driver (C) Jiri Kosina
[ 11.940590] usbcore: registered new interface driver usbhid
[ 11.940593] usbhid: USB HID core driver
[ 11.941407] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:02.0/usb1/1-3/1-3:1.0/input/input4
[ 11.941501] hid-generic 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:02.0-3/input0
[ 12.326698] usb 4-2: new low-speed USB device number 2 using ohci-pci
[ 12.362206] scsi 8:0:0:0: Direct-Access ST350041 8AS PQ: 0 ANSI: 4
[ 12.363457] sd 8:0:0:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 12.369826] sd 8:0:0:0: [sdc] Write Protect is off
[ 12.369829] sd 8:0:0:0: [sdc] Mode Sense: 38 00 00 00
[ 12.376081] sd 8:0:0:0: [sdc] No Caching mode page found
[ 12.376084] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 12.390729] sd 8:0:0:0: [sdc] No Caching mode page found
[ 12.390732] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 12.452119] sdc: sdc1 sdc2 < sdc5 sdc6 >
[ 12.481181] sd 8:0:0:0: [sdc] No Caching mode page found
[ 12.481187] sd 8:0:0:0: [sdc] Assuming drive cache: write through
[ 12.481192] sd 8:0:0:0: [sdc] Attached SCSI disk
[ 12.565972] usb 4-2
Visiteur
Peux tu le copier-coller sur ce site et nous donner le lien ensuite
zatox Membre non connecté
-
- Voir le profil du membre zatox
- Inscrit le : 27/09/2011
- Groupes :
sylvainsjc :
il manque la totalité de dmesg
il manque la totalité de dmesg
Euh je ne comprends pas, il y a plus de 1000 lignes dans mon texte caché qui correspond à la commande dmesg !!
Bon je vais voir pour mettre sur le site comme tu me dis mais il n'y aura pas plus que ce que j'ai mis dans mon message précedent !!!
Pour la commande journalctl --no-pager j'ai mis le résultat dans un fichier txt mais il y a plus d'1 million de lignes !!! tu veux que j'en fasse quoi ?
Merci pour ton aide
zatox Membre non connecté
-
- Voir le profil du membre zatox
- Inscrit le : 27/09/2011
- Groupes :
Visiteur
Code TEXT :
[ 19.562440] nvidia: module license 'NVIDIA' taints kernel. [ 19.562448] Disabling lock debugging due to kernel taint [ 19.583569] NVRM: The NVIDIA probe routine was not called for 1 device(s). [ 19.583576] NVRM: This can occur when a driver such as: NVRM: nouveau, rivafb, nvidiafb or rivatv NVRM: was loaded and obtained ownership of the NVIDIA device(s). [ 19.583580] NVRM: Try unloading the conflicting kernel module (and/or NVRM: reconfigure your kernel without the conflicting NVRM: driver(s)), then try loading the NVIDIA kernel module NVRM: again. [ 19.583584] NVRM: No NVIDIA graphics adapter probed! [ 19.583586] [drm] Module unloaded [ 19.583721] NVRM: NVIDIA init module failed!
Il faudrait tester un redémarrage en blacklistant nouveau
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie