Forum

Reprise du message précédent

Bonjour
Petite information complémentaire, quand je lance Mageia9 en mode normal dans un premier temps j'ai une fenêtre avec deux lignes qui commence par:
Chargement du disque etc.....
ensuite un écran vide, sombre mais avec un peu de luminosité
Puis passage à un écran noir, sans la moindre trace de luminosité, totalement éteint.
Je ne sais pas ce que cela implique dans le processus de démarrage.
J'ai activé clavier et lecteur dans l'application LightDM GTK+Greeter sans résultat.

Voici le sortie de systelmctl status lightdm:

]# systemctl status lightdm
● lightdm.service - Light Display Manager
Loaded: loaded (/usr/lib/systemd/system/lightdm.service; enabled; preset: >
Active: active (running) since Sat 2026-02-21 09:49:00 CET; 2min 3s ago
Docs: man:lightdm(1)
Main PID: 1367 (lightdm)
Tasks: 8 (limit: 4552)
Memory: 142.0M
CPU: 8.676s
CGroup: /system.slice/lightdm.service
├─1367 /usr/sbin/lightdm
└─1383 /usr/libexec/Xorg :0 -seat seat0 -auth /var/run/lightdm/roo>

févr. 21 09:49:00 localhost.localdomain systemd[1]: Started lightdm.service.
févr. 21 09:49:21 localhost.localdomain lightdm[2747]: /usr/share/mga/backgroun>
févr. 21 09:49:21 localhost.localdomain lightdm[2747]: Software: www.inkscape.o>
févr. 21 09:49:21 localhost.localdomain lightdm[2747]: Default gamma for ITRU>
févr. 21 09:49:21 localhost.localdomain lightdm[2747]: Zooming image by 36%..>
févr. 21 09:49:21 localhost.localdomain lightdm[2747]: Clipping image......do>
févr. 21 09:49:22 localhost.localdomain lightdm[2747]: Building XImage...done
févr. 21 09:49:22 localhost.localdomain lightdm[2747]: Have adjusted image fr>
févr. 21 09:49:33 localhost.localdomain lightdm[2805]: pam_kwallet5(lightdm:aut>
févr. 21 09:49:34 localhost.localdomain lightdm[2805]: pam_kwallet5(lightdm:set>
lines 1-22/22 (END)...skipping...
● lightdm.service - Light Display Manager
Loaded: loaded (/usr/lib/systemd/system/lightdm.service; enabled; preset: enabled)
Active: active (running) since Sat 2026-02-21 09:49:00 CET; 2min 3s ago
Docs: man:lightdm(1)
Main PID: 1367 (lightdm)
Tasks: 8 (limit: 4552)
Memory: 142.0M
CPU: 8.676s
CGroup: /system.slice/lightdm.service
├─1367 /usr/sbin/lightdm
└─1383 /usr/libexec/Xorg :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt1 -novtswitch

févr. 21 09:49:00 localhost.localdomain systemd[1]: Started lightdm.service.
févr. 21 09:49:21 localhost.localdomain lightdm[2747]: /usr/share/mga/backgrounds/default.jpg is a 3840x2160 8 bit deep RGB PNG image with an alpha channel
févr. 21 09:49:21 localhost.localdomain lightdm[2747]: Software: www.inkscape.org
févr. 21 09:49:21 localhost.localdomain lightdm[2747]: Default gamma for ITRUE image is 1.00
févr. 21 09:49:21 localhost.localdomain lightdm[2747]: Zooming image by 36%...done
févr. 21 09:49:21 localhost.localdomain lightdm[2747]: Clipping image......done
févr. 21 09:49:22 localhost.localdomain lightdm[2747]: Building XImage...done
févr. 21 09:49:22 localhost.localdomain lightdm[2747]: Have adjusted image from 1.00 to display gamma of 2.20
févr. 21 09:49:33 localhost.localdomain lightdm[2805]: pam_kwallet5(lightdm:auth): pam_kwallet5: pam_sm_authenticate
févr. 21 09:49:34 localhost.localdomain lightdm[2805]: pam_kwallet5(lightdm:setcred): pam_kwallet5: pam_sm_setcred
~

Bonjour
je vois que sur cette ligne là:

1383 /usr/libexec/Xorg :0 -seat seat0 -auth /var/run/lightdm/root/:0 -nolisten tcp vt1 -novtswitch

tout est à zéro

Bonjour,

Je suis perdu entre démarrage normal et recovery.

Le status du lightdm s' affiche lors d' un démarrage normal ou en recovery ?

Citation :

Chargement du disque etc.....
ensuite un écran vide, sombre mais avec un peu de luminosité
Puis passage à un écran noir, sans la moindre trace de luminosité, totalement éteint.

On peut donc supposer que grub essaye de lancer quelque chose mais qu' il ne charge rien ( du coup l' écran est sombre car en attente, mais qu'ensuite une veille se met en route "écran éteint".

S' agissant d' un portable, si on branche un écran externe, se passe t' il quelque chose ?

Bonjour
J'ai lancé la commande # systemctl status lightdm en recovery , la mode normal est totalement inaccessible.
J'avais déjà tenté le coup de l'écran externe, j'ai d'abord contrôlé qu'il est opérationnel en recovery, aucune réaction de ce dernier, aucun affichage.

Je n'aurais peut être pas eu ces inconvénients en installation UEFI, mais je crois qu'il y avait une impossibilité en relation avec gpt.

Bonjour,

Ici si le problème est lié au pilote graphique uefi et gpt n' ont aucune influence.

En règle générale, uefi et gpt vont de paire. Si le disque à un partitionnement en mbr, pas sur que l' uefi soit possible.

Si le mode normal est innacessible c' est sur lui qu' il faut jouer avec les options de grub.

Il me semble avoir lu précédement que le passage de nomodeset permettait d' aller plus loin dans le démarrage en mode normal. Il peut donc être intéressant de rajouter ce paramètre pour voir ce que cela implique sur le démarrage des autres processus. Si l' on arrive à au minimum une ligne de commande en mode normal, on peut ensuite essayer de régler ce qui bloque le démarrage de l' interface graphique.

Édité par nic80 Le 22/02/2026 à 09h32

Bonjour
J'ai inséré un "nomodeset" après splash quiet, à partir du CCM 'Configurer le démarrage du système".
Après l'écran avec le chaudron bouillonnant , je retrouve
[Failed] Failed to start lightdm.service.
[ 81.309884] hdaudio hdaudioCOD2: Unable to configure, disabling
les tentatives de commande startx etc.. sont inopérantes.
Par contre la combinaison de touches magiques fonctionne.

Édité par dao Le 22/02/2026 à 15h48

Bonjour,

Donc ici du coup, on peut regarder ce que dit le fichier de log de xorg.

cat /var/log/Xorg.0.log pour voir pourquoi le serveur ne veut pas se lancer.

Bonjour
J'ai lancé la commande en user, elle est un peu longue

41.879]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 41.879] Current Operating System: Linux localhost.localdomain 6.6.120-desktop-1.mga9 #1 SMP PREEMPT_DYNAMIC Wed Jan 14 01:59:53 UTC 2026 x86_64
[ 41.879] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.6.120-desktop-1.mga9 root=UUID=86e81b1e-c3ef-4baf-ae60-5f3df0a9c4c0 ro splash quiet nomodeset noiswmd resume=UUID=e2a54b29-6784-410a-8da7-22351ba75642 audit=0 vga=791
[ 41.879] Build ID: x11-server 21.1.8-7.9.mga9
[ 41.879] Current version of pixman: 0.42.2
[ 41.879] Before reporting problems, check https://bugs.mageia.org
to make sure that you have the latest version.
[ 41.879] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 41.879] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 22 23:12:04 2026
[ 41.880] (==) Using config file: "/etc/X11/xorg.conf"
[ 41.880] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 41.880] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 41.880] (==) ServerLayout "layout1"
[ 41.881] (**) |-->Screen "screen1" (0)
[ 41.881] (**) | |-->Monitor "monitor1"
[ 41.882] (**) | |-->Device "device1"
[ 41.882] (**) Option "DontZap" "False"
[ 41.882] (**) Option "AllowMouseOpenFail"
[ 41.882] (==) Automatically adding devices
[ 41.882] (==) Automatically enabling devices
[ 41.882] (==) Automatically adding GPU devices
[ 41.882] (==) Automatically binding GPU devices
[ 41.882] (==) Max clients allowed: 512, resource mask: 0xfffff
[ 41.882] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 41.882] (**) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 41.882] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 41.882] (II) Loader magic: 0x631e20
[ 41.882] (II) Module ABI versions:
[ 41.882] X.Org ANSI C Emulation: 0.4
[ 41.882] X.Org Video Driver: 25.2
[ 41.882] X.Org XInput driver : 24.4
[ 41.882] X.Org Server Extension : 10.0
[ 41.888] (++) using VT number 1

[ 41.889] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 41.894] (--) PCI:*(0@0:2:0) 8086:22b1:1028:06ac rev 53, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 41.894] (II) Open ACPI successful (/var/run/acpid.socket)
[ 41.894] (II) "glx" will be loaded by default.
[ 41.894] (II) LoadModule: "v4l"
[ 41.895] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[ 41.895] (II) Module v4l: vendor="X.Org Foundation"
[ 41.895] compiled for 1.21.1.7, module version = 0.1.1
[ 41.895] ABI class: X.Org Video Driver, version 25.2
[ 41.895] (II) LoadModule: "glx"
[ 41.895] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 41.898] (II) Module glx: vendor="X.Org Foundation"
[ 41.898] compiled for 1.21.1.8, module version = 1.0.0
[ 41.898] ABI class: X.Org Server Extension, version 10.0
[ 41.898] (II) LoadModule: "modesetting"
[ 41.898] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 41.899] (II) Module modesetting: vendor="X.Org Foundation"
[ 41.899] compiled for 1.21.1.8, module version = 1.21.1
[ 41.899] Module class: X.Org Video Driver
[ 41.899] ABI class: X.Org Video Driver, version 25.2
[ 41.899] (II) v4l driver for Video4Linux overlay mode (V4L2)
[ 41.899] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 41.899] (WW) Falling back to old probe method for v4l
[ 41.899] (EE) open /dev/dri/card0: No such file or directory
[ 41.899] (WW) Falling back to old probe method for modesetting
[ 41.900] (EE) open /dev/dri/card0: No such file or directory
[ 41.900] (EE) Screen 0 deleted because of no matching config section.
[ 41.900] (II) UnloadModule: "modesetting"
[ 41.900] (EE) Device(s) detected, but none match those in the config file.
[ 41.900] (EE)
Fatal server error:
[ 41.900] (EE) no screens found(EE)
[ 41.900] (EE)
Please consult the Mageia support
at https://bugs.mageia.org
for help.
[ 41.900] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 41.900] (EE)
[ 41.900] (EE) Server terminated with error (1). Closing log file.

Bonjour,

Ici Xorg essaye d' utiliser le pilote modesettings mais n' y arrive pas ( et pour cause le nomodeset doit désactiver cette possibilité).

Il faudrait essayer de renommer le ficheir /etc/X11/xorg.conf ( mv /etc/X11/xorg.conf /etc/X11/xorg.conf.backup) puis ressayer de redémarrer le pc ou relancer la commande startx.

Bonjour
J'ai fait la modif, le pc a démarré de façon moins rapide qu'en recovery et je trouve que la qualité d'affichage est moins bonne qu'en recovery.

Édité par dao Le 23/02/2026 à 09h51

Bonjour,

Suite à la modification le pc démarre en mode normal ?

Si oui, il faudrait regarder ce que dit le journal système et le fichier de log de Xorg. Les deux pourront peut être expliquer la lenteur de démarrage.

Bonjour
Quand je vais dans affichage, c'est bloqué sur mode "default" 1024x768 en 76Hz

J'ai lancé la commande:
$ cat /var/log/Xorg.0.log | tee sortielog2.txt

la sortie est très longue

[ 37.875]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 37.875] Current Operating System: Linux localhost.localdomain 6.6.120-desktop-1.mga9 #1 SMP PREEMPT_DYNAMIC Wed Jan 14 01:59:53 UTC 2026 x86_64
[ 37.875] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.6.120-desktop-1.mga9 root=UUID=86e81b1e-c3ef-4baf-ae60-5f3df0a9c4c0 ro splash quiet nomodeset noiswmd resume=UUID=e2a54b29-6784-410a-8da7-22351ba75642 audit=0 vga=791
[ 37.875] Build ID: x11-server 21.1.8-7.9.mga9
[ 37.875] Current version of pixman: 0.42.2
[ 37.875] Before reporting problems, check https://bugs.mageia.org
to make sure that you have the latest version.
[ 37.875] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 37.875] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 23 09:44:23 2026
[ 37.920] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 37.920] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 38.018] (==) No Layout section. Using the first Screen section.
[ 38.018] (==) No screen section available. Using defaults.
[ 38.018] (**) |-->Screen "Default Screen Section" (0)
[ 38.018] (**) | |-->Monitor "<default monitor>"
[ 38.019] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 38.019] (==) Automatically adding devices
[ 38.019] (==) Automatically enabling devices
[ 38.019] (==) Automatically adding GPU devices
[ 38.019] (==) Automatically binding GPU devices
[ 38.019] (==) Max clients allowed: 512, resource mask: 0xfffff
[ 38.019] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 38.019] (**) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 38.019] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 38.019] (II) Loader magic: 0x631e20
[ 38.019] (II) Module ABI versions:
[ 38.019] X.Org ANSI C Emulation: 0.4
[ 38.019] X.Org Video Driver: 25.2
[ 38.019] X.Org XInput driver : 24.4
[ 38.019] X.Org Server Extension : 10.0
[ 38.025] (++) using VT number 1

[ 38.025] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 38.031] (--) PCI:*(0@0:2:0) 8086:22b1:1028:06ac rev 53, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 38.032] (II) Open ACPI successful (/var/run/acpid.socket)
[ 38.032] (II) LoadModule: "glx"
[ 38.033] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 38.036] (II) Module glx: vendor="X.Org Foundation"
[ 38.036] compiled for 1.21.1.8, module version = 1.0.0
[ 38.036] ABI class: X.Org Server Extension, version 10.0
[ 38.036] (==) Matched intel as autoconfigured driver 0
[ 38.036] (==) Matched modesetting as autoconfigured driver 1
[ 38.036] (==) Matched fbdev as autoconfigured driver 2
[ 38.036] (==) Matched vesa as autoconfigured driver 3
[ 38.036] (==) Assigned the driver to the xf86ConfigLayout
[ 38.036] (II) LoadModule: "intel"
[ 38.036] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 38.055] (II) Module intel: vendor="X.Org Foundation"
[ 38.055] compiled for 1.21.1.8, module version = 2.99.917
[ 38.055] Module class: X.Org Video Driver
[ 38.055] ABI class: X.Org Video Driver, version 25.2
[ 38.055] (II) LoadModule: "modesetting"
[ 38.055] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 38.070] (II) Module modesetting: vendor="X.Org Foundation"
[ 38.070] compiled for 1.21.1.8, module version = 1.21.1
[ 38.070] Module class: X.Org Video Driver
[ 38.070] ABI class: X.Org Video Driver, version 25.2
[ 38.070] (II) LoadModule: "fbdev"
[ 38.071] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so
[ 38.082] (II) Module fbdev: vendor="X.Org Foundation"
[ 38.082] compiled for 1.21.1.7, module version = 0.5.0
[ 38.082] Module class: X.Org Video Driver
[ 38.082] ABI class: X.Org Video Driver, version 25.2
[ 38.082] (II) LoadModule: "vesa"
[ 38.082] (II) Loading /usr/lib64/xorg/modules/drivers/vesa_drv.so
[ 38.092] (II) Module vesa: vendor="X.Org Foundation"
[ 38.092] compiled for 1.21.1.4, module version = 2.6.0
[ 38.092] Module class: X.Org Video Driver
[ 38.092] ABI class: X.Org Video Driver, version 25.2
[ 38.092] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 38.092] (II) intel: Driver for Intel(R) HD Graphics
[ 38.092] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 38.092] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 38.092] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 38.092] (II) FBDEV: driver for framebuffer: fbdev
[ 38.092] (II) VESA: driver for VESA chipsets: vesa
[ 40.146] intel: waited 2020 ms for i915.ko driver to load
[ 40.159] (EE) open /dev/dri/card0: No such file or directory
[ 40.159] (WW) Falling back to old probe method for modesetting
[ 40.159] (EE) open /dev/dri/card0: No such file or directory
[ 40.159] (II) Loading sub module "fbdevhw"
[ 40.159] (II) LoadModule: "fbdevhw"
[ 40.160] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 40.204] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 40.204] compiled for 1.21.1.8, module version = 0.0.2
[ 40.204] ABI class: X.Org Video Driver, version 25.2
[ 40.204] (EE) Unable to find a valid framebuffer device
[ 40.204] (WW) Falling back to old probe method for fbdev
[ 40.204] (II) Loading sub module "fbdevhw"
[ 40.204] (II) LoadModule: "fbdevhw"
[ 40.205] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so
[ 40.205] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 40.205] compiled for 1.21.1.8, module version = 0.0.2
[ 40.205] ABI class: X.Org Video Driver, version 25.2
[ 40.205] (II) FBDEV(2): using default device
[ 40.205] vesa: Refusing to run, Framebuffer or dri device present
[ 40.205] (EE) Screen 0 deleted because of no matching config section.
[ 40.205] (II) UnloadModule: "modesetting"
[ 40.205] (EE) Screen 0 deleted because of no matching config section.
[ 40.205] (II) UnloadModule: "fbdev"
[ 40.205] (II) UnloadSubModule: "fbdevhw"
[ 40.205] (II) FBDEV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 16/16
[ 40.205] (==) FBDEV(0): Depth 16, (==) framebuffer bpp 16
[ 40.205] (==) FBDEV(0): RGB weight 565
[ 40.205] (==) FBDEV(0): Default visual is TrueColor
[ 40.205] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 40.205] (II) FBDEV(0): hardware: VESA VGA (video memory: 3072kB)
[ 40.205] (DB) xf86MergeOutputClassOptions unsupported bus type 0
[ 40.205] (II) FBDEV(0): checking modes against framebuffer device...
[ 40.205] (II) FBDEV(0): checking modes against monitor...
[ 40.205] (II) FBDEV(0): Virtual size is 1024x768 (pitch 1024)
[ 40.205] (**) FBDEV(0): Built-in mode "current": 78.7 MHz, 59.9 kHz, 75.7 Hz
[ 40.206] (II) FBDEV(0): Modeline "current"x0.0 78.65 1024 1056 1184 1312 768 772 776 792 -hsync -vsync -csync (59.9 kHz b)
[ 40.206] (==) FBDEV(0): DPI set to (96, 96)
[ 40.206] (II) Loading sub module "fb"
[ 40.206] (II) LoadModule: "fb"
[ 40.206] (II) Module "fb" already built-in
[ 40.206] (**) FBDEV(0): using shadow framebuffer
[ 40.206] (II) Loading sub module "shadow"
[ 40.206] (II) LoadModule: "shadow"
[ 40.206] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[ 40.209] (II) Module shadow: vendor="X.Org Foundation"
[ 40.210] compiled for 1.21.1.8, module version = 1.1.0
[ 40.210] ABI class: X.Org ANSI C Emulation, version 0.4
[ 40.210] (II) FBDEV(0): FBIOBLANK: Invalid argument (Screen blanking not supported by kernel - disabling)
[ 40.251] (==) FBDEV(0): Backing store enabled
[ 40.252] (==) FBDEV(0): DPMS enabled
[ 40.252] (II) Initializing extension Generic Event Extension
[ 40.252] (II) Initializing extension SHAPE
[ 40.253] (II) Initializing extension MIT-SHM
[ 40.253] (II) Initializing extension XInputExtension
[ 40.254] (II) Initializing extension XTEST
[ 40.254] (II) Initializing extension BIG-REQUESTS
[ 40.254] (II) Initializing extension SYNC
[ 40.255] (II) Initializing extension XKEYBOARD
[ 40.255] (II) Initializing extension XC-MISC
[ 40.255] (II) Initializing extension SECURITY
[ 40.255] (II) Initializing extension XFIXES
[ 40.256] (II) Initializing extension RENDER
[ 40.256] (II) Initializing extension RANDR
[ 40.257] (II) Initializing extension COMPOSITE
[ 40.257] (II) Initializing extension DAMAGE
[ 40.257] (II) Initializing extension MIT-SCREEN-SAVER
[ 40.258] (II) Initializing extension DOUBLE-BUFFER
[ 40.258] (II) Initializing extension RECORD
[ 40.258] (II) Initializing extension DPMS
[ 40.259] (II) Initializing extension Present
[ 40.259] (II) Initializing extension DRI3
[ 40.259] (II) Initializing extension X-Resource
[ 40.259] (II) Initializing extension XVideo
[ 40.260] (II) Initializing extension XVideo-MotionCompensation
[ 40.260] (II) Initializing extension GLX
[ 40.260] (II) AIGLX: Screen 0 is not DRI2 capable
[ 43.011] (II) IGLX: Loaded and initialized swrast
[ 43.012] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 43.012] (II) Initializing extension XFree86-VidModeExtension
[ 43.013] (II) Initializing extension XFree86-DGA
[ 43.015] (II) Initializing extension XFree86-DRI
[ 43.015] (II) Initializing extension DRI2
[ 44.255] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 44.255] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 44.255] (**) Power Button: Applying InputClass "system-keyboard"
[ 44.255] (II) LoadModule: "libinput"
[ 44.256] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 44.259] (II) Module libinput: vendor="X.Org Foundation"
[ 44.259] compiled for 1.21.1.7, module version = 1.2.1
[ 44.259] Module class: X.Org XInput Driver
[ 44.259] ABI class: X.Org XInput driver, version 24.4
[ 44.259] (II) Using input driver 'libinput' for 'Power Button'
[ 44.259] (**) Power Button: always reports core events
[ 44.259] (**) Option "Device" "/dev/input/event3"
[ 44.341] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 44.342] (II) event3 - Power Button: device is a keyboard
[ 44.342] (II) event3 - Power Button: device removed
[ 44.354] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 44.354] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 44.354] (**) Option "xkb_model" "pc105"
[ 44.354] (**) Option "xkb_layout" "fr"
[ 44.355] (**) Option "xkb_options" "compose:rwin"
[ 44.768] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 44.768] (II) event3 - Power Button: device is a keyboard
[ 44.770] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 44.770] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 44.770] (**) Power Button: Applying InputClass "system-keyboard"
[ 44.770] (II) Using input driver 'libinput' for 'Power Button'
[ 44.770] (**) Power Button: always reports core events
[ 44.771] (**) Option "Device" "/dev/input/event1"
[ 44.773] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 44.773] (II) event1 - Power Button: device is a keyboard
[ 44.773] (II) event1 - Power Button: device removed
[ 44.780] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 44.780] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 44.780] (**) Option "xkb_model" "pc105"
[ 44.780] (**) Option "xkb_layout" "fr"
[ 44.780] (**) Option "xkb_options" "compose:rwin"
[ 44.783] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 44.783] (II) event1 - Power Button: device is a keyboard
[ 44.785] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 44.785] (II) No input driver specified, ignoring this device.
[ 44.785] (II) This device may have been added with another device file.
[ 44.787] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 44.787] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 44.787] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 44.787] (II) Using input driver 'libinput' for 'Sleep Button'
[ 44.787] (**) Sleep Button: always reports core events
[ 44.787] (**) Option "Device" "/dev/input/event2"
[ 44.789] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 44.789] (II) event2 - Sleep Button: device is a keyboard
[ 44.790] (II) event2 - Sleep Button: device removed
[ 44.802] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 44.802] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 44.802] (**) Option "xkb_model" "pc105"
[ 44.803] (**) Option "xkb_layout" "fr"
[ 44.803] (**) Option "xkb_options" "compose:rwin"
[ 44.806] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 44.806] (II) event2 - Sleep Button: device is a keyboard
[ 44.809] (II) config/udev: Adding input device Barcode Reader (/dev/input/event5)
[ 44.809] (**) Barcode Reader : Applying InputClass "libinput keyboard catchall"
[ 44.809] (**) Barcode Reader : Applying InputClass "system-keyboard"
[ 44.809] (II) Using input driver 'libinput' for 'Barcode Reader '
[ 44.809] (**) Barcode Reader : always reports core events
[ 44.809] (**) Option "Device" "/dev/input/event5"
[ 44.813] (II) event5 - Barcode Reader : is tagged by udev as: Keyboard
[ 44.813] (II) event5 - Barcode Reader : device is a keyboard
[ 44.814] (II) event5 - Barcode Reader : device removed
[ 44.828] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:13BA:0018.0001/input/input6/event5"
[ 44.828] (II) XINPUT: Adding extended input device "Barcode Reader " (type: KEYBOARD, id 9)
[ 44.828] (**) Option "xkb_model" "pc105"
[ 44.828] (**) Option "xkb_layout" "fr"
[ 44.828] (**) Option "xkb_options" "compose:rwin"
[ 44.833] (II) event5 - Barcode Reader : is tagged by udev as: Keyboard
[ 44.833] (II) event5 - Barcode Reader : device is a keyboard
[ 44.836] (II) config/udev: Adding input device Barcode Reader Mouse (/dev/input/event6)
[ 44.837] (**) Barcode Reader Mouse: Applying InputClass "libinput pointer catchall"
[ 44.837] (II) Using input driver 'libinput' for 'Barcode Reader Mouse'
[ 44.837] (**) Barcode Reader Mouse: always reports core events
[ 44.837] (**) Option "Device" "/dev/input/event6"
[ 44.841] (II) event6 - Barcode Reader Mouse: is tagged by udev as: Mouse
[ 44.841] (II) event6 - Barcode Reader Mouse: device is a pointer
[ 44.842] (II) event6 - Barcode Reader Mouse: device removed
[ 44.864] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:13BA:0018.0002/input/input7/event6"
[ 44.864] (II) XINPUT: Adding extended input device "Barcode Reader Mouse" (type: MOUSE, id 10)
[ 44.865] (**) Option "AccelerationScheme" "none"
[ 44.865] (**) Barcode Reader Mouse: (accel) selected scheme none/0
[ 44.865] (**) Barcode Reader Mouse: (accel) acceleration factor: 2.000
[ 44.865] (**) Barcode Reader Mouse: (accel) acceleration threshold: 4
[ 44.869] (II) event6 - Barcode Reader Mouse: is tagged by udev as: Mouse
[ 44.870] (II) event6 - Barcode Reader Mouse: device is a pointer
[ 44.873] (II) config/udev: Adding input device Barcode Reader Mouse (/dev/input/mouse0)
[ 44.873] (II) No input driver specified, ignoring this device.
[ 44.873] (II) This device may have been added with another device file.
[ 44.875] (II) config/udev: Adding input device Barcode Reader System Control (/dev/input/event7)
[ 44.875] (**) Barcode Reader System Control: Applying InputClass "libinput keyboard catchall"
[ 44.875] (**) Barcode Reader System Control: Applying InputClass "system-keyboard"
[ 44.875] (II) Using input driver 'libinput' for 'Barcode Reader System Control'
[ 44.875] (**) Barcode Reader System Control: always reports core events
[ 44.875] (**) Option "Device" "/dev/input/event7"
[ 44.879] (II) event7 - Barcode Reader System Control: is tagged by udev as: Keyboard
[ 44.880] (II) event7 - Barcode Reader System Control: device is a keyboard
[ 44.880] (II) event7 - Barcode Reader System Control: device removed
[ 44.890] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:13BA:0018.0002/input/input8/event7"
[ 44.890] (II) XINPUT: Adding extended input device "Barcode Reader System Control" (type: KEYBOARD, id 11)
[ 44.890] (**) Option "xkb_model" "pc105"
[ 44.890] (**) Option "xkb_layout" "fr"
[ 44.890] (**) Option "xkb_options" "compose:rwin"
[ 44.895] (II) event7 - Barcode Reader System Control: is tagged by udev as: Keyboard
[ 44.895] (II) event7 - Barcode Reader System Control: device is a keyboard
[ 44.898] (II) config/udev: Adding input device Barcode Reader Consumer Control (/dev/input/event8)
[ 44.898] (**) Barcode Reader Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 44.898] (**) Barcode Reader Consumer Control: Applying InputClass "system-keyboard"
[ 44.898] (II) Using input driver 'libinput' for 'Barcode Reader Consumer Control'
[ 44.899] (**) Barcode Reader Consumer Control: always reports core events
[ 44.899] (**) Option "Device" "/dev/input/event8"
[ 44.903] (II) event8 - Barcode Reader Consumer Control: is tagged by udev as: Keyboard
[ 44.903] (II) event8 - Barcode Reader Consumer Control: device is a keyboard
[ 44.904] (II) event8 - Barcode Reader Consumer Control: device removed
[ 44.914] (II) libinput: Barcode Reader Consumer Control: needs a virtual subdevice
[ 44.914] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:13BA:0018.0002/input/input9/event8"
[ 44.914] (II) XINPUT: Adding extended input device "Barcode Reader Consumer Control" (type: MOUSE, id 12)
[ 44.915] (**) Option "AccelerationScheme" "none"
[ 44.915] (**) Barcode Reader Consumer Control: (accel) selected scheme none/0
[ 44.915] (**) Barcode Reader Consumer Control: (accel) acceleration factor: 2.000
[ 44.915] (**) Barcode Reader Consumer Control: (accel) acceleration threshold: 4
[ 44.919] (II) event8 - Barcode Reader Consumer Control: is tagged by udev as: Keyboard
[ 44.919] (II) event8 - Barcode Reader Consumer Control: device is a keyboard
[ 44.923] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event9)
[ 44.923] (**) USB OPTICAL MOUSE: Applying InputClass "libinput pointer catchall"
[ 44.923] (II) Using input driver 'libinput' for ' USB OPTICAL MOUSE'
[ 44.923] (**) USB OPTICAL MOUSE: always reports core events
[ 44.923] (**) Option "Device" "/dev/input/event9"
[ 44.980] (II) event9 - USB OPTICAL MOUSE: is tagged by udev as: Mouse
[ 44.981] (II) event9 - USB OPTICAL MOUSE: device is a pointer
[ 44.981] (II) event9 - USB OPTICAL MOUSE: device removed
[ 45.004] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:0000:3825.0003/input/input10/event9"
[ 45.004] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 13)
[ 45.005] (**) Option "AccelerationScheme" "none"
[ 45.005] (**) USB OPTICAL MOUSE: (accel) selected scheme none/0
[ 45.005] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 45.005] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 45.067] (II) event9 - USB OPTICAL MOUSE: is tagged by udev as: Mouse
[ 45.284] (II) event9 - USB OPTICAL MOUSE: device is a pointer
[ 45.287] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse1)
[ 45.287] (II) No input driver specified, ignoring this device.
[ 45.287] (II) This device may have been added with another device file.
[ 45.289] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event11)
[ 45.289] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 45.289] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[ 45.289] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[ 45.289] (**) Dell WMI hotkeys: always reports core events
[ 45.289] (**) Option "Device" "/dev/input/event11"
[ 45.292] (II) event11 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 45.293] (II) event11 - Dell WMI hotkeys: device is a keyboard
[ 45.293] (II) event11 - Dell WMI hotkeys: device removed
[ 45.303] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input12/event11"
[ 45.303] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 14)
[ 45.303] (**) Option "xkb_model" "pc105"
[ 45.303] (**) Option "xkb_layout" "fr"
[ 45.303] (**) Option "xkb_options" "compose:rwin"
[ 45.308] (II) event11 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 45.308] (II) event11 - Dell WMI hotkeys: device is a keyboard
[ 45.311] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 45.311] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 45.311] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 45.311] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 45.311] (**) AT Translated Set 2 keyboard: always reports core events
[ 45.311] (**) Option "Device" "/dev/input/event4"
[ 45.314] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 45.314] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 45.316] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 45.324] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 45.324] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[ 45.325] (**) Option "xkb_model" "pc105"
[ 45.325] (**) Option "xkb_layout" "fr"
[ 45.325] (**) Option "xkb_options" "compose:rwin"
[ 45.328] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 45.328] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 45.332] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[ 45.332] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 45.332] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 45.332] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 45.332] (**) Option "Device" "/dev/input/event12"
[ 45.335] (II) event12 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 45.339] (II) event12 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 45.339] (II) event12 - SynPS/2 Synaptics TouchPad: device removed
[ 45.363] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event12"
[ 45.363] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
[ 45.367] (**) Option "AccelerationScheme" "none"
[ 45.367] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 45.367] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 45.367] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 45.370] (II) event12 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 45.373] (II) event12 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 45.376] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[ 45.376] (II) No input driver specified, ignoring this device.
[ 45.376] (II) This device may have been added with another device file.
[ 45.379] (II) config/udev: Adding input device DELL Wireless hotkeys (/dev/input/event10)
[ 45.379] (**) DELL Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[ 45.379] (**) DELL Wireless hotkeys: Applying InputClass "system-keyboard"
[ 45.379] (II) Using input driver 'libinput' for 'DELL Wireless hotkeys'
[ 45.379] (**) DELL Wireless hotkeys: always reports core events
[ 45.379] (**) Option "Device" "/dev/input/event10"
[ 45.381] (II) event10 - DELL Wireless hotkeys: is tagged by udev as: Keyboard
[ 45.381] (II) event10 - DELL Wireless hotkeys: device is a keyboard
[ 45.382] (II) event10 - DELL Wireless hotkeys: device removed
[ 45.404] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event10"
[ 45.404] (II) XINPUT: Adding extended input device "DELL Wireless hotkeys" (type: KEYBOARD, id 17)
[ 45.404] (**) Option "xkb_model" "pc105"
[ 45.404] (**) Option "xkb_layout" "fr"
[ 45.404] (**) Option "xkb_options" "compose:rwin"
[ 45.407] (II) event10 - DELL Wireless hotkeys: is tagged by udev as: Keyboard
[ 45.407] (II) event10 - DELL Wireless hotkeys: device is a keyboard
[ 45.423] (**) Barcode Reader Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 45.423] (**) Barcode Reader Consumer Control: Applying InputClass "system-keyboard"
[ 45.423] (II) Using input driver 'libinput' for 'Barcode Reader Consumer Control'
[ 45.423] (**) Barcode Reader Consumer Control: always reports core events
[ 45.423] (**) Option "Device" "/dev/input/event8"
[ 45.423] (II) libinput: Barcode Reader Consumer Control: is a virtual subdevice
[ 45.423] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:13BA:0018.0002/input/input9/event8"
[ 45.423] (II) XINPUT: Adding extended input device "Barcode Reader Consumer Control" (type: KEYBOARD, id 18)
[ 45.423] (**) Option "xkb_model" "pc105"
[ 45.423] (**) Option "xkb_layout" "fr"
[ 45.423] (**) Option "xkb_options" "compose:rwin"
[ 79.265] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event14)
[ 79.265] (II) No input driver specified, ignoring this device.
[ 79.265] (II) This device may have been added with another device file.
[ 79.277] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
[ 79.277] (II) No input driver specified, ignoring this device.
[ 79.277] (II) This device may have been added with another device file.

Bonjour
J'ai voulu changer la résolution et ça ne démarre plus, j'a redémarré en mode recovery qui lui affiche:
1366x768* et 60,00Hz
contre
1024x768 et 76Hz en mode normal que j'ai voulu changer au pif en , 1152x??? pour trouver un meilleur rendu.

Bonjour
Du coup j'ai relancé une commande
$ cat /var/log/Xorg.0.log | tee sortielog3.txt

Est-ce qu'en renommant ce fichier en old et rétablissant le fichier précédent ça réglerait le problème de démarrage

[ 42.001]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 42.001] Current Operating System: Linux localhost.localdomain 6.6.120-desktop-1.mga9 #1 SMP PREEMPT_DYNAMIC Wed Jan 14 01:59:53 UTC 2026 x86_64
[ 42.002] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.6.120-desktop-1.mga9 root=UUID=86e81b1e-c3ef-4baf-ae60-5f3df0a9c4c0 ro failsafe
[ 42.002] Build ID: x11-server 21.1.8-7.9.mga9
[ 42.002] Current version of pixman: 0.42.2
[ 42.002] Before reporting problems, check https://bugs.mageia.org
to make sure that you have the latest version.
[ 42.002] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 42.002] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Feb 23 11:21:38 2026
[ 42.032] (==) Using config file: "/etc/X11/xorg.conf"
[ 42.032] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 42.032] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 42.389] (==) ServerLayout "layout1"
[ 42.390] (**) |-->Screen "screen1" (0)
[ 42.390] (**) | |-->Monitor "monitor1"
[ 42.391] (**) | |-->Device "device1"
[ 42.391] (**) Option "DontZap" "False"
[ 42.391] (**) Option "AllowMouseOpenFail"
[ 42.391] (==) Automatically adding devices
[ 42.391] (==) Automatically enabling devices
[ 42.391] (==) Automatically adding GPU devices
[ 42.391] (==) Automatically binding GPU devices
[ 42.391] (==) Max clients allowed: 512, resource mask: 0xfffff
[ 42.391] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 42.391] (**) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 42.391] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 42.391] (II) Loader magic: 0x631e20
[ 42.391] (II) Module ABI versions:
[ 42.391] X.Org ANSI C Emulation: 0.4
[ 42.391] X.Org Video Driver: 25.2
[ 42.391] X.Org XInput driver : 24.4
[ 42.391] X.Org Server Extension : 10.0
[ 42.393] (++) using VT number 1

[ 42.393] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 42.397] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 42.397] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card0
[ 42.410] (--) PCI:*(0@0:2:0) 8086:22b1:1028:06ac rev 53, Mem @ 0x90000000/16777216, 0x80000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 42.411] (II) Open ACPI successful (/var/run/acpid.socket)
[ 42.411] (II) "glx" will be loaded by default.
[ 42.411] (II) LoadModule: "v4l"
[ 42.419] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[ 42.440] (II) Module v4l: vendor="X.Org Foundation"
[ 42.440] compiled for 1.21.1.7, module version = 0.1.1
[ 42.440] ABI class: X.Org Video Driver, version 25.2
[ 42.440] (II) LoadModule: "glx"
[ 42.442] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 42.457] (II) Module glx: vendor="X.Org Foundation"
[ 42.458] compiled for 1.21.1.8, module version = 1.0.0
[ 42.458] ABI class: X.Org Server Extension, version 10.0
[ 42.458] (II) LoadModule: "intel"
[ 42.458] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 43.292] (II) Module intel: vendor="X.Org Foundation"
[ 43.325] compiled for 1.21.1.8, module version = 2.99.917
[ 43.325] Module class: X.Org Video Driver
[ 43.325] ABI class: X.Org Video Driver, version 25.2
[ 43.325] (II) v4l driver for Video4Linux overlay mode (V4L2)
[ 43.325] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 43.326] (II) intel: Driver for Intel(R) HD Graphics
[ 43.326] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 43.326] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 43.329] (WW) Falling back to old probe method for v4l
[ 43.450] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20201103
[ 43.458] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 43.458] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 2 threads
[ 43.458] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 43.458] (==) intel(0): RGB weight 888
[ 43.459] (==) intel(0): Default visual is TrueColor
[ 43.463] (II) intel(0): Output eDP1 using monitor section monitor1
[ 43.463] (**) intel(0): Option "PreferredMode" "1152x864"
[ 43.464] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 43.464] (II) intel(0): Enabled output eDP1
[ 43.464] (II) intel(0): Output DP1 has no monitor section
[ 43.464] (II) intel(0): Enabled output DP1
[ 43.464] (II) intel(0): Output HDMI1 has no monitor section
[ 43.465] (II) intel(0): Enabled output HDMI1
[ 43.465] (II) intel(0): Output DP2 has no monitor section
[ 43.465] (II) intel(0): Enabled output DP2
[ 43.465] (II) intel(0): Output HDMI2 has no monitor section
[ 43.466] (II) intel(0): Enabled output HDMI2
[ 43.466] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 43.466] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 43.466] (II) intel(0): Enabled output VIRTUAL1
[ 43.468] (II) intel(0): EDID for output eDP1
[ 43.468] (II) intel(0): Manufacturer: BOE Model: 671 Serial#: 0
[ 43.468] (II) intel(0): Year: 2016 Week: 1
[ 43.468] (II) intel(0): EDID Version: 1.4
[ 43.468] (II) intel(0): Digital Display Input
[ 43.468] (II) intel(0): 6 bits per channel
[ 43.468] (II) intel(0): Digital interface is DisplayPort
[ 43.468] (II) intel(0): Max Image Size [cm]: horiz.: 34 vert.: 19
[ 43.469] (II) intel(0): Gamma: 2.20
[ 43.469] (II) intel(0): No DPMS capabilities specified
[ 43.469] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 43.469] (II) intel(0): First detailed timing is preferred mode
[ 43.469] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 43.469] (II) intel(0): redX: 0.590 redY: 0.350 greenX: 0.329 greenY: 0.555
[ 43.469] (II) intel(0): blueX: 0.152 blueY: 0.118 whiteX: 0.312 whiteY: 0.328
[ 43.469] (II) intel(0): Manufacturer's mask: 0
[ 43.469] (II) intel(0): Supported detailed timing:
[ 43.469] (II) intel(0): clock: 70.1 MHz Image Size: 344 x 194 mm
[ 43.469] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1485 h_border: 0
[ 43.469] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 787 v_border: 0
[ 43.469] (II) intel(0): Supported detailed timing:
[ 43.469] (II) intel(0): clock: 60.5 MHz Image Size: 344 x 194 mm
[ 43.469] (II) intel(0): h_active: 1366 h_sync: 1414 h_sync_end 1446 h_blank_end 1551 h_border: 0
[ 43.469] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 813 v_border: 0
[ 43.469] (II) intel(0): NCH65€NT15N32
[ 43.469] (II) intel(0): Unknown vendor-specific block 0
[ 43.469] (II) intel(0): EDID (in hex):
[ 43.469] (II) intel(0): 00ffffffffffff0009e5710600000000
[ 43.469] (II) intel(0): 011a0104952213780a24109759548e27
[ 43.469] (II) intel(0): 1e505400000001010101010101010101
[ 43.469] (II) intel(0): 010101010101641b5677500013303020
[ 43.469] (II) intel(0): 360058c21000001aa21756b950002d30
[ 43.469] (II) intel(0): 3020360058c21000001a000000fe004e
[ 43.469] (II) intel(0): 43483635804e5431354e333200000000
[ 43.469] (II) intel(0): 00004101940110000009010a20200096
[ 43.469] (II) intel(0): EDID vendor "BOE", prod id 1649
[ 43.469] (II) intel(0): Printing DDC gathered Modelines:
[ 43.469] (II) intel(0): Modeline "1366x768"x0.0 70.12 1366 1414 1446 1485 768 771 777 787 +hsync -vsync (47.2 kHz eP)
[ 43.469] (II) intel(0): Modeline "1366x768"x0.0 60.50 1366 1414 1446 1551 768 771 777 813 +hsync -vsync (39.0 kHz e)
[ 43.470] (II) intel(0): Not using mode "1280x1024" (exceeds panel dimensions)
[ 43.470] (II) intel(0): Not using mode "1280x1024" (exceeds panel dimensions)
[ 43.470] (II) intel(0): Not using mode "1152x864_120" (exceeds panel dimensions)
[ 43.470] (II) intel(0): Not using mode "1152x864_100" (exceeds panel dimensions)
[ 43.470] (II) intel(0): Not using mode "1152x864_85" (exceeds panel dimensions)
[ 43.470] (II) intel(0): Not using mode "1152x864_75" (exceeds panel dimensions)
[ 43.470] (II) intel(0): Not using mode "1152x864_60" (exceeds panel dimensions)
[ 43.470] (II) intel(0): Not using mode "1152x864_50" (exceeds panel dimensions)
[ 43.470] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "320x180" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "320x180" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "360x202" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "360x202" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "432x243" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "432x243" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "480x270" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "480x270" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "512x288" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "512x288" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "640x360" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "640x360" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "684x384" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "684x384" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "800x450" (doublescan mode not supported)
[ 43.470] (II) intel(0): Not using default mode "800x450" (doublescan mode not supported)
[ 43.471] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 43.471] (II) intel(0): Not using default mode "640x400" (doublescan mode not supported)
[ 43.471] (II) intel(0): Not using default mode "640x400" (doublescan mode not supported)
[ 43.471] (II) intel(0): Not using default mode "700x450" (doublescan mode not supported)
[ 43.471] (II) intel(0): Not using default mode "700x450" (doublescan mode not supported)
[ 43.471] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 43.471] (II) intel(0): Printing probed modes for output eDP1
[ 43.471] (II) intel(0): Modeline "1366x768"x60.0 70.12 1366 1414 1446 1485 768 771 777 787 +hsync -vsync (47.2 kHz eP)
[ 43.471] (II) intel(0): Modeline "1366x768"x48.0 60.50 1366 1414 1446 1551 768 771 777 813 +hsync -vsync (39.0 kHz e)
[ 43.471] (II) intel(0): Modeline "1280x720"x59.7 63.75 1280 1328 1360 1440 720 723 728 741 +hsync -vsync (44.3 kHz d)
[ 43.471] (II) intel(0): Modeline "1152x768"x68.4 78.74 1152 1173 1269 1440 768 769 772 800 +vsync (54.7 kHz)
[ 43.471] (II) intel(0): Modeline "1024x768_120"x120.0 139.05 1024 1104 1216 1408 768 769 772 823 -hsync +vsync (98.8 kHz)
[ 43.471] (II) intel(0): Modeline "1024x768_100"x100.0 113.31 1024 1096 1208 1392 768 769 772 814 -hsync +vsync (81.4 kHz)
[ 43.471] (II) intel(0): Modeline "1024x768"x98.2 112.62 1024 1076 1248 1420 768 768 780 808 +hsync +vsync (79.3 kHz)
[ 43.471] (II) intel(0): Modeline "1024x768_85"x85.0 94.39 1024 1088 1200 1376 768 769 772 807 -hsync +vsync (68.6 kHz)
[ 43.471] (II) intel(0): Modeline "1024x768_75"x75.0 81.80 1024 1080 1192 1360 768 769 772 802 -hsync +vsync (60.1 kHz)
[ 43.471] (II) intel(0): Modeline "1024x768"x74.8 78.53 1024 1049 1145 1312 768 769 772 800 +hsync +vsync (59.9 kHz)
[ 43.471] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1032 1176 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 43.471] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 43.471] (II) intel(0): Modeline "1024x768_60"x60.0 64.11 1024 1080 1184 1344 768 769 772 795 -hsync +vsync (47.7 kHz)
[ 43.471] (II) intel(0): Modeline "1024x768_50"x50.0 51.89 1024 1064 1168 1312 768 769 772 791 -hsync +vsync (39.6 kHz)
[ 43.471] (II) intel(0): Modeline "1024x576"x60.0 46.99 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
[ 43.471] (II) intel(0): Modeline "1024x576"x59.9 46.50 1024 1064 1160 1296 576 579 584 599 -hsync +vsync (35.9 kHz d)
[ 43.471] (II) intel(0): Modeline "1024x576"x59.8 42.00 1024 1072 1104 1184 576 579 584 593 +hsync -vsync (35.5 kHz d)
[ 43.471] (II) intel(0): Modeline "832x624_120"x120.0 91.20 832 896 984 1136 624 625 628 669 -hsync +vsync (80.3 kHz)
[ 43.471] (II) intel(0): Modeline "832x624_100"x100.0 74.03 832 888 976 1120 624 625 628 661 -hsync +vsync (66.1 kHz)
[ 43.471] (II) intel(0): Modeline "832x624_85"x85.0 61.56 832 880 968 1104 624 625 628 656 -hsync +vsync (55.8 kHz)
[ 43.471] (II) intel(0): Modeline "832x624"x74.2 57.00 832 876 940 1152 624 625 628 667 -hsync -vsync (49.5 kHz)
[ 43.471] (II) intel(0): Modeline "832x624_75"x75.0 53.20 832 872 960 1088 624 625 628 652 -hsync +vsync (48.9 kHz)
[ 43.471] (II) intel(0): Modeline "832x624_60"x60.0 41.55 832 864 952 1072 624 625 628 646 -hsync +vsync (38.8 kHz)
[ 43.471] (II) intel(0): Modeline "832x624_50"x50.0 33.95 832 856 944 1056 624 625 628 643 -hsync +vsync (32.1 kHz)
[ 43.471] (II) intel(0): Modeline "960x540"x60.0 40.78 960 992 1088 1216 540 541 544 559 -hsync +vsync (33.5 kHz)
[ 43.471] (II) intel(0): Modeline "960x540"x59.6 40.75 960 992 1088 1216 540 543 548 562 -hsync +vsync (33.5 kHz d)
[ 43.471] (II) intel(0): Modeline "960x540"x59.8 37.25 960 1008 1040 1120 540 543 548 556 +hsync -vsync (33.3 kHz d)
[ 43.471] (II) intel(0): Modeline "800x600"x186.0 100.00 800 816 824 840 600 616 624 640 -hsync -vsync (119.0 kHz)
[ 43.471] (II) intel(0): Modeline "800x600_120"x120.0 83.95 800 856 944 1088 600 601 604 643 -hsync +vsync (77.2 kHz)
[ 43.471] (II) intel(0): Modeline "800x600_100"x100.0 68.18 800 848 936 1072 600 601 604 636 -hsync +vsync (63.6 kHz)
[ 43.471] (II) intel(0): Modeline "800x600"x94.9 62.36 800 821 901 1040 600 601 604 632 +hsync +vsync (60.0 kHz)
[ 43.471] (II) intel(0): Modeline "800x600_85"x85.0 56.55 800 840 928 1056 600 601 604 630 -hsync +vsync (53.6 kHz)
[ 43.471] (II) intel(0): Modeline "800x600_75"x75.0 48.91 800 840 920 1040 600 601 604 627 -hsync +vsync (47.0 kHz)
[ 43.472] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 43.472] (II) intel(0): Modeline "800x600_60"x60.0 38.22 800 832 912 1024 600 601 604 622 -hsync +vsync (37.3 kHz)
[ 43.472] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 43.472] (II) intel(0): Modeline "800x600_50"x50.0 31.15 800 824 904 1008 600 601 604 618 -hsync +vsync (30.9 kHz)
[ 43.472] (II) intel(0): Modeline "768x576"x100.0 63.07 768 800 960 1024 576 578 590 616 (61.6 kHz)
[ 43.472] (II) intel(0): Modeline "768x576"x79.4 50.00 768 832 846 1000 576 590 595 630 (50.0 kHz)
[ 43.472] (II) intel(0): Modeline "864x486"x60.0 32.90 864 888 976 1088 486 487 490 504 -hsync +vsync (30.2 kHz)
[ 43.472] (II) intel(0): Modeline "864x486"x59.9 32.50 864 888 968 1072 486 489 494 506 -hsync +vsync (30.3 kHz d)
[ 43.472] (II) intel(0): Modeline "864x486"x59.6 30.50 864 912 944 1024 486 489 494 500 +hsync -vsync (29.8 kHz d)
[ 43.472] (II) intel(0): Modeline "640x480_120"x120.0 52.41 640 680 744 848 480 481 484 515 -hsync +vsync (61.8 kHz)
[ 43.472] (II) intel(0): Modeline "640x480"x116.7 49.89 640 661 725 832 480 481 484 514 +hsync +vsync (60.0 kHz)
[ 43.472] (II) intel(0): Modeline "640x480_100"x100.0 43.16 640 680 744 848 480 481 484 509 -hsync +vsync (50.9 kHz)
[ 43.472] (II) intel(0): Modeline "640x480_85"x85.0 35.71 640 672 736 832 480 481 484 505 -hsync +vsync (42.9 kHz)
[ 43.472] (II) intel(0): Modeline "640x480_75"x75.0 30.72 640 664 728 816 480 481 484 502 -hsync +vsync (37.6 kHz)
[ 43.472] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 43.472] (II) intel(0): Modeline "640x480_60"x60.0 23.86 640 656 720 800 480 481 484 497 -hsync +vsync (29.8 kHz)
[ 43.472] (II) intel(0): Modeline "640x480_50"x50.0 19.40 640 648 712 784 480 481 484 495 -hsync +vsync (24.7 kHz)
[ 43.472] (II) intel(0): Modeline "720x405"x59.5 22.50 720 744 808 896 405 408 413 422 -hsync +vsync (25.1 kHz d)
[ 43.472] (II) intel(0): Modeline "720x405"x60.0 22.18 720 728 800 880 405 406 409 420 -hsync +vsync (25.2 kHz)
[ 43.472] (II) intel(0): Modeline "720x405"x59.0 21.75 720 768 800 880 405 408 413 419 +hsync -vsync (24.7 kHz d)
[ 43.472] (II) intel(0): Modeline "680x384"x60.0 19.68 680 688 752 824 384 385 388 398 -hsync +vsync (23.9 kHz)
[ 43.472] (II) intel(0): Modeline "640x360"x59.8 18.00 640 664 720 800 360 363 368 376 -hsync +vsync (22.5 kHz d)
[ 43.472] (II) intel(0): Modeline "640x360"x59.3 17.75 640 688 720 800 360 363 368 374 +hsync -vsync (22.2 kHz d)
[ 43.472] (II) intel(0): Modeline "640x360"x60.0 17.19 640 640 704 768 360 361 364 373 -hsync +vsync (22.4 kHz)
[ 43.472] (II) intel(0): Modeline "480x360_120"x120.0 28.98 480 504 552 624 360 361 364 387 -hsync +vsync (46.4 kHz)
[ 43.472] (II) intel(0): Modeline "480x360_100"x100.0 23.84 480 504 552 624 360 361 364 382 -hsync +vsync (38.2 kHz)
[ 43.472] (II) intel(0): Modeline "480x360_85"x85.0 19.59 480 496 544 608 360 361 364 379 -hsync +vsync (32.2 kHz)
[ 43.472] (II) intel(0): Modeline "480x360_75"x75.0 16.74 480 488 536 592 360 361 364 377 -hsync +vsync (28.3 kHz)
[ 43.472] (II) intel(0): Modeline "480x360_60"x60.0 12.89 480 480 528 576 360 361 364 373 -hsync +vsync (22.4 kHz)
[ 43.472] (II) intel(0): Modeline "480x360_50"x50.0 10.39 480 472 520 560 360 361 364 371 -hsync +vsync (18.6 kHz)
[ 43.472] (II) intel(0): Modeline "320x240_120"x120.0 12.38 320 328 360 400 240 241 244 258 -hsync +vsync (31.0 kHz)
[ 43.472] (II) intel(0): Modeline "320x240_100"x100.0 9.79 320 320 352 384 240 241 244 255 -hsync +vsync (25.5 kHz)
[ 43.472] (II) intel(0): Modeline "320x240_85"x85.0 8.26 320 320 352 384 240 241 244 253 -hsync +vsync (21.5 kHz)
[ 43.472] (II) intel(0): Modeline "320x240_75"x75.0 6.93 320 312 344 368 240 241 244 251 -hsync +vsync (18.8 kHz)
[ 43.472] (II) intel(0): Modeline "320x240_60"x60.0 5.26 320 304 336 352 240 241 244 249 -hsync +vsync (14.9 kHz)
[ 43.472] (II) intel(0): Modeline "320x240_50"x50.0 4.17 320 304 328 336 240 241 244 248 -hsync +vsync (12.4 kHz)
[ 43.472] (II) intel(0): EDID for output DP1
[ 43.579] (II) intel(0): EDID for output DP2
[ 43.580] (II) intel(0): EDID for output HDMI1
[ 43.680] (II) intel(0): EDID for output HDMI2
[ 43.680] (II) intel(0): EDID for output VIRTUAL1
[ 43.680] (II) intel(0): Output eDP1 connected
[ 43.680] (II) intel(0): Output DP1 disconnected
[ 43.680] (II) intel(0): Output DP2 disconnected
[ 43.680] (II) intel(0): Output HDMI1 disconnected
[ 43.680] (II) intel(0): Output HDMI2 disconnected
[ 43.680] (II) intel(0): Output VIRTUAL1 disconnected
[ 43.680] (II) intel(0): Using exact sizes for initial modes
[ 43.680] (II) intel(0): Output eDP1 using initial mode 1366x768 +0+0
[ 43.702] (==) intel(0): TearFree enabled
[ 43.703] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 43.703] (**) intel(0): Display dimensions: (340, 190) mm
[ 43.703] (**) intel(0): DPI set to (102, 102)
[ 43.703] (II) Loading sub module "dri3"
[ 43.703] (II) LoadModule: "dri3"
[ 43.703] (II) Module "dri3" already built-in
[ 43.703] (II) Loading sub module "dri2"
[ 43.703] (II) LoadModule: "dri2"
[ 43.703] (II) Module "dri2" already built-in
[ 43.703] (II) Loading sub module "present"
[ 43.703] (II) LoadModule: "present"
[ 43.703] (II) Module "present" already built-in
[ 43.859] (II) intel(0): SNA initialized with Cherryview (gen8) backend
[ 43.859] (==) intel(0): Backing store enabled
[ 43.859] (==) intel(0): Silken mouse enabled
[ 43.861] (II) intel(0): HW Cursor enabled
[ 43.863] (**) intel(0): DPMS enabled
[ 43.863] (==) intel(0): Display hotplug detection enabled
[ 43.969] (EE) v4l: /dev/video0: no overlay support
[ 43.970] (EE) v4l: /dev/video1: no overlay support
[ 43.989] (II) intel(0): [DRI2] Setup complete
[ 43.989] (II) intel(0): [DRI2] DRI driver: i965
[ 43.989] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 43.989] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 43.989] (II) intel(0): hardware support for Present enabled
[ 43.989] (WW) intel(0): Option "PreferredMode" is not used
[ 43.989] (II) Initializing extension Generic Event Extension
[ 43.990] (II) Initializing extension SHAPE
[ 43.990] (II) Initializing extension MIT-SHM
[ 43.991] (II) Initializing extension XInputExtension
[ 43.999] (II) Initializing extension XTEST
[ 43.999] (II) Initializing extension BIG-REQUESTS
[ 44.000] (II) Initializing extension SYNC
[ 44.000] (II) Initializing extension XKEYBOARD
[ 44.000] (II) Initializing extension XC-MISC
[ 44.001] (II) Initializing extension SECURITY
[ 44.001] (II) Initializing extension XFIXES
[ 44.001] (II) Initializing extension RENDER
[ 44.002] (II) Initializing extension RANDR
[ 44.003] (II) Initializing extension COMPOSITE
[ 44.003] (II) Initializing extension DAMAGE
[ 44.003] (II) Initializing extension MIT-SCREEN-SAVER
[ 44.003] (II) Initializing extension DOUBLE-BUFFER
[ 44.004] (II) Initializing extension RECORD
[ 44.004] (II) Initializing extension DPMS
[ 44.005] (II) Initializing extension Present
[ 44.005] (II) Initializing extension DRI3
[ 44.005] (II) Initializing extension X-Resource
[ 44.005] (II) Initializing extension XVideo
[ 44.006] (II) Initializing extension XVideo-MotionCompensation
[ 44.006] (II) Initializing extension GLX
[ 44.006] (EE) AIGLX error: dlopen of /usr/lib64/dri/i965_dri.so failed (/usr/lib64/dri/i965_dri.so: cannot open shared object file: No such file or directory)
[ 44.006] (EE) AIGLX error: unable to load driver i965
[ 50.787] (II) IGLX: Loaded and initialized swrast
[ 51.357] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 51.358] (II) Initializing extension XFree86-VidModeExtension
[ 51.359] (II) Initializing extension XFree86-DGA
[ 51.361] (II) Initializing extension XFree86-DRI
[ 51.361] (II) Initializing extension DRI2
[ 51.608] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 51.638] (II) intel(0): Setting screen physical size to 361 x 203
[ 53.399] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 53.399] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 53.399] (**) Power Button: Applying InputClass "system-keyboard"
[ 53.399] (II) LoadModule: "libinput"
[ 53.400] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 56.419] (II) Module libinput: vendor="X.Org Foundation"
[ 56.419] compiled for 1.21.1.7, module version = 1.2.1
[ 56.419] Module class: X.Org XInput Driver
[ 56.419] ABI class: X.Org XInput driver, version 24.4
[ 56.419] (II) Using input driver 'libinput' for 'Power Button'
[ 56.419] (**) Power Button: always reports core events
[ 56.419] (**) Option "Device" "/dev/input/event3"
[ 57.345] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 57.346] (II) event3 - Power Button: device is a keyboard
[ 57.346] (II) event3 - Power Button: device removed
[ 57.353] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 57.353] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 57.353] (**) Option "xkb_model" "pc105"
[ 57.353] (**) Option "xkb_layout" "fr"
[ 57.353] (**) Option "xkb_options" "compose:rwin"
[ 58.630] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 58.630] (II) event3 - Power Button: device is a keyboard
[ 58.633] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 58.633] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 58.633] (**) Video Bus: Applying InputClass "system-keyboard"
[ 58.633] (II) Using input driver 'libinput' for 'Video Bus'
[ 58.633] (**) Video Bus: always reports core events
[ 58.633] (**) Option "Device" "/dev/input/event9"
[ 58.636] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 58.637] (II) event9 - Video Bus: device is a keyboard
[ 58.637] (II) event9 - Video Bus: device removed
[ 58.648] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10/event9"
[ 58.648] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 58.649] (**) Option "xkb_model" "pc105"
[ 58.649] (**) Option "xkb_layout" "fr"
[ 58.649] (**) Option "xkb_options" "compose:rwin"
[ 58.652] (II) event9 - Video Bus: is tagged by udev as: Keyboard
[ 58.652] (II) event9 - Video Bus: device is a keyboard
[ 58.654] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 58.654] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 58.654] (**) Power Button: Applying InputClass "system-keyboard"
[ 58.654] (II) Using input driver 'libinput' for 'Power Button'
[ 58.654] (**) Power Button: always reports core events
[ 58.654] (**) Option "Device" "/dev/input/event1"
[ 58.657] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 58.657] (II) event1 - Power Button: device is a keyboard
[ 58.657] (II) event1 - Power Button: device removed
[ 58.668] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[ 58.668] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 58.668] (**) Option "xkb_model" "pc105"
[ 58.668] (**) Option "xkb_layout" "fr"
[ 58.668] (**) Option "xkb_options" "compose:rwin"
[ 58.672] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 58.672] (II) event1 - Power Button: device is a keyboard
[ 58.674] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[ 58.674] (II) No input driver specified, ignoring this device.
[ 58.674] (II) This device may have been added with another device file.
[ 58.675] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 58.675] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 58.675] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 58.675] (II) Using input driver 'libinput' for 'Sleep Button'
[ 58.677] (**) Sleep Button: always reports core events
[ 58.677] (**) Option "Device" "/dev/input/event2"
[ 58.680] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 58.680] (II) event2 - Sleep Button: device is a keyboard
[ 58.680] (II) event2 - Sleep Button: device removed
[ 58.690] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[ 58.690] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 58.690] (**) Option "xkb_model" "pc105"
[ 58.690] (**) Option "xkb_layout" "fr"
[ 58.690] (**) Option "xkb_options" "compose:rwin"
[ 58.695] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 58.695] (II) event2 - Sleep Button: device is a keyboard
[ 58.700] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event5)
[ 58.700] (**) USB OPTICAL MOUSE: Applying InputClass "libinput pointer catchall"
[ 58.700] (II) Using input driver 'libinput' for ' USB OPTICAL MOUSE'
[ 58.700] (**) USB OPTICAL MOUSE: always reports core events
[ 58.700] (**) Option "Device" "/dev/input/event5"
[ 58.705] (II) event5 - USB OPTICAL MOUSE: is tagged by udev as: Mouse
[ 58.706] (II) event5 - USB OPTICAL MOUSE: device is a pointer
[ 58.707] (II) event5 - USB OPTICAL MOUSE: device removed
[ 58.728] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2.4/1-2.4:1.0/0003:0000:3825.0001/input/input6/event5"
[ 58.728] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 10)
[ 58.729] (**) Option "AccelerationScheme" "none"
[ 58.729] (**) USB OPTICAL MOUSE: (accel) selected scheme none/0
[ 58.729] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 58.729] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 58.734] (II) event5 - USB OPTICAL MOUSE: is tagged by udev as: Mouse
[ 58.734] (II) event5 - USB OPTICAL MOUSE: device is a pointer
[ 58.737] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 58.737] (II) No input driver specified, ignoring this device.
[ 58.737] (II) This device may have been added with another device file.
[ 58.739] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 58.739] (II) No input driver specified, ignoring this device.
[ 58.739] (II) This device may have been added with another device file.
[ 58.740] (II) config/udev: Adding input device HDA Intel PCH Headphone Mic (/dev/input/event11)
[ 58.740] (II) No input driver specified, ignoring this device.
[ 58.740] (II) This device may have been added with another device file.
[ 58.741] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 58.741] (II) No input driver specified, ignoring this device.
[ 58.741] (II) This device may have been added with another device file.
[ 58.743] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[ 58.743] (**) Dell WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 58.743] (**) Dell WMI hotkeys: Applying InputClass "system-keyboard"
[ 58.743] (II) Using input driver 'libinput' for 'Dell WMI hotkeys'
[ 58.743] (**) Dell WMI hotkeys: always reports core events
[ 58.743] (**) Option "Device" "/dev/input/event7"
[ 58.747] (II) event7 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 58.747] (II) event7 - Dell WMI hotkeys: device is a keyboard
[ 58.748] (II) event7 - Dell WMI hotkeys: device removed
[ 58.758] (**) Option "config_info" "udev:/sys/devices/platform/PNP0C14:00/wmi_bus/wmi_bus-PNP0C14:00/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input8/event7"
[ 58.758] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD, id 11)
[ 58.759] (**) Option "xkb_model" "pc105"
[ 58.759] (**) Option "xkb_layout" "fr"
[ 58.759] (**) Option "xkb_options" "compose:rwin"
[ 58.763] (II) event7 - Dell WMI hotkeys: is tagged by udev as: Keyboard
[ 58.763] (II) event7 - Dell WMI hotkeys: device is a keyboard
[ 58.766] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 58.766] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 58.766] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 58.766] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 58.766] (**) AT Translated Set 2 keyboard: always reports core events
[ 58.766] (**) Option "Device" "/dev/input/event4"
[ 58.769] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 58.769] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 58.772] (II) event4 - AT Translated Set 2 keyboard: device removed
[ 58.782] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 58.782] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 58.782] (**) Option "xkb_model" "pc105"
[ 58.782] (**) Option "xkb_layout" "fr"
[ 58.782] (**) Option "xkb_options" "compose:rwin"
[ 58.787] (II) event4 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 58.787] (II) event4 - AT Translated Set 2 keyboard: device is a keyboard
[ 58.791] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 58.791] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 58.791] (II) Using input driver 'libinput' for 'SynPS/2 Synaptics TouchPad'
[ 58.791] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 58.791] (**) Option "Device" "/dev/input/event8"
[ 58.795] (II) event8 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 58.800] (II) event8 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 58.800] (II) event8 - SynPS/2 Synaptics TouchPad: device removed
[ 58.819] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event8"
[ 58.819] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 58.823] (**) Option "AccelerationScheme" "none"
[ 58.823] (**) SynPS/2 Synaptics TouchPad: (accel) selected scheme none/0
[ 58.823] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 58.823] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 58.826] (II) event8 - SynPS/2 Synaptics TouchPad: is tagged by udev as: Touchpad
[ 58.830] (II) event8 - SynPS/2 Synaptics TouchPad: device is a touchpad
[ 58.833] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 58.833] (II) No input driver specified, ignoring this device.
[ 58.833] (II) This device may have been added with another device file.
[ 58.836] (II) config/udev: Adding input device DELL Wireless hotkeys (/dev/input/event6)
[ 58.836] (**) DELL Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[ 58.836] (**) DELL Wireless hotkeys: Applying InputClass "system-keyboard"
[ 58.836] (II) Using input driver 'libinput' for 'DELL Wireless hotkeys'
[ 58.836] (**) DELL Wireless hotkeys: always reports core events
[ 58.836] (**) Option "Device" "/dev/input/event6"
[ 58.838] (II) event6 - DELL Wireless hotkeys: is tagged by udev as: Keyboard
[ 58.838] (II) event6 - DELL Wireless hotkeys: device is a keyboard
[ 58.839] (II) event6 - DELL Wireless hotkeys: device removed
[ 58.856] (**) Option "config_info" "udev:/sys/devices/virtual/input/input7/event6"
[ 58.856] (II) XINPUT: Adding extended input device "DELL Wireless hotkeys" (type: KEYBOARD, id 14)
[ 58.856] (**) Option "xkb_model" "pc105"
[ 58.856] (**) Option "xkb_layout" "fr"
[ 58.856] (**) Option "xkb_options" "compose:rwin"
[ 58.859] (II) event6 - DELL Wireless hotkeys: is tagged by udev as: Keyboard
[ 58.859] (II) event6 - DELL Wireless hotkeys: device is a keyboard