dd externe usb reconnu partout
sauf avec Mageia 5 kde
Système et matériels / Autres matériels et périphériques
loutch Membre non connecté
-
- Voir le profil du membre loutch
- Inscrit le : 07/07/2010
- Groupes :
Reprise du message précédent
fdisk commande introuvableOUPSSSSSSS
en root donne ceci:
Code TEXT :
[root@localhost loutch]# fdisk -l Disque /dev/ram0 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/ram1 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/ram2 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/ram3 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/ram4 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/ram5 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/ram6 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/ram7 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/ram8 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/ram9 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/ram10 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/ram11 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/ram12 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/ram13 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/ram14 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/ram15 : 31,3 MiB, 32768000 octets, 64000 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Disque /dev/sda : 465,8 GiB, 500107862016 octets, 976773168 secteurs Unités : secteur de 1 × 512 = 512 octets Taille de secteur (logique / physique) : 512 octets / 4096 octets taille d'E/S (minimale / optimale) : 4096 octets / 4096 octets Type d'étiquette de disque : dos Identifiant de disque : 0x32e7477d Device Boot Start End Sectors Size Id Type /dev/sda1 * 2048 409599 407552 199M 7 HPFS/NTFS/exFAT /dev/sda2 409600 720408575 719998976 343,3G 7 HPFS/NTFS/exFAT /dev/sda3 720410622 925199414 204788793 97,7G f W95 Ext'd (LBA) /dev/sda4 925208576 968450047 43241472 20,6G 7 HPFS/NTFS/exFAT /dev/sda5 720410624 728600575 8189952 3,9G 7 HPFS/NTFS/exFAT /dev/sda6 728602624 791249444 62646821 29,9G 83 Linux /dev/sda7 791252992 799426529 8173538 3,9G 82 Linux swap / Solaris /dev/sda8 799428608 851011244 51582637 24,6G 83 Linux /dev/sda9 851011584 868589708 17578125 8,4G 83 Linux /dev/sda10 868591616 874448895 5857280 2,8G 83 Linux /dev/sda11 874450944 905986100 31535157 15G 83 Linux /dev/sda12 905988096 925199414 19211319 9,2G 83 Linux La partition 4 ne commence pas sur une frontière de cylindre physique. Les entrées de la table de partitions ne sont pas dans l'ordre du disque.
Édité par loutch Le 06/05/2017 à 09h27
Linuxmint 24.02 Xia - Mageia 9 xfce et plasma sur ssd sur HP Pavilion g7
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
m@rco123 Membre non connecté
-
- Voir le profil du membre m@rco123
- Inscrit le : 15/05/2009
- Groupes :
Dis , ton disque est en ntfs ? si oui, il a bien été démonté lors de sa dernière utilisation ?
Édité par m@rco123 Le 06/05/2017 à 09h36
Lenovo 110-17acl
cg Mullins [Radeon R3 Graphics] / ssd SanDisk 250Go
Mageia 9 plasma 64b
packard ls11hr
cg intel 810 / ssd SanDisk 128Go
Mageia 9 plasma 64b
cg Mullins [Radeon R3 Graphics] / ssd SanDisk 250Go
Mageia 9 plasma 64b
packard ls11hr
cg intel 810 / ssd SanDisk 128Go
Mageia 9 plasma 64b
loutch Membre non connecté
-
- Voir le profil du membre loutch
- Inscrit le : 07/07/2010
- Groupes :
Maintenant sur la télés je peux pas le démonté je l'arrête seulement avec son bouton .
Je vais le démonter , l'éjecter correctement et redémarrer sur mageia .
Linuxmint 24.02 Xia - Mageia 9 xfce et plasma sur ssd sur HP Pavilion g7
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
loutch Membre non connecté
-
- Voir le profil du membre loutch
- Inscrit le : 07/07/2010
- Groupes :
Allumé , rien , pourtant j'entend le dique tourné cable branché.
Linuxmint 24.02 Xia - Mageia 9 xfce et plasma sur ssd sur HP Pavilion g7
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
Yves
loutch Membre non connecté
-
- Voir le profil du membre loutch
- Inscrit le : 07/07/2010
- Groupes :
Caché:
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffd7ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xffd80000-0xffffffff] [ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88015fa00000 s96536 r8192 d30440 u262144 [ 0.000000] pcpu-alloc: s96536 r8192 d30440 u262144 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1018895 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=linux root=UUID=33421747-4cff-42b7-878f-59d2e4aa1c0d splash quiet pci=nommconf resume=UUID=38d495d0-a8e5-4197-8d39-78959791f3a4 vga=788 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 3979672K/4140912K available (6957K kernel code, 1213K rwdata, 3532K rodata, 1332K init, 824K bss, 161240K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] Build-time adjustment of leaf fanout to 64. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8 [ 0.000000] NR_IRQS:4352 nr_irqs:488 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] hpet clockevent registered [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 2494.496 MHz processor [ 0.000033] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.99 BogoMIPS (lpj=2494496) [ 0.000035] pid_max: default: 32768 minimum: 301 [ 0.000041] ACPI: Core revision 20150930 [ 0.009029] ACPI: 5 ACPI AML tables successfully acquired and loaded [ 0.009049] Security Framework initialized [ 0.009051] TOMOYO Linux initialized [ 0.009293] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.010212] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.010666] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.010671] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) [ 0.010872] Initializing cgroup subsys io [ 0.010876] Initializing cgroup subsys devices [ 0.010878] Initializing cgroup subsys freezer [ 0.010880] Initializing cgroup subsys net_cls [ 0.010901] CPU: Physical Processor ID: 0 [ 0.010902] CPU: Processor Core ID: 0 [ 0.010906] ENERGY_PERF_BIAS: Set to 'normal', was 'performance' [ 0.010907] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8) [ 0.010909] mce: CPU supports 7 MCE banks [ 0.010917] CPU0: Thermal monitoring handled by SMI [ 0.010923] process: using mwait in idle threads [ 0.010926] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8 [ 0.010927] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.011336] Freeing SMP alternatives memory: 28K (ffffffff81e7e000 - ffffffff81e85000) [ 0.025794] ftrace: allocating 26962 entries in 106 pages [ 0.057971] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.058499] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.068513] TSC deadline timer enabled [ 0.068521] smpboot: CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (family: 0x6, model: 0x2a, stepping: 0x7) [ 0.068589] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, full-width counters, Intel PMU driver. [ 0.068649] ... version: 3 [ 0.068652] ... bit width: 48 [ 0.068654] ... generic registers: 4 [ 0.068657] ... value mask: 0000ffffffffffff [ 0.068660] ... max period: 00007fffffffffff [ 0.068663] ... fixed-purpose events: 3 [ 0.068666] ... event mask: 000000070000000f [ 0.070060] x86: Booting SMP configuration: [ 0.070065] .... node #0, CPUs: #1 [ 0.070894] CPU1: Thermal monitoring handled by SMI [ 0.073186] #2 [ 0.074866] microcode: CPU2 microcode updated early to revision 0x29, date = 2013-06-12 [ 0.074947] CPU2: Thermal monitoring handled by SMI [ 0.077980] #3 [ 0.077980] CPU3: Thermal monitoring handled by SMI [ 0.080087] x86: Booted up 1 node, 4 CPUs [ 0.080096] smpboot: Total of 4 processors activated (19955.96 BogoMIPS) [ 0.088746] devtmpfs: initialized [ 0.095556] PM: Registering ACPI NVS region [mem 0x9cebf000-0x9cfbefff] (1048576 bytes) [ 0.095811] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.095850] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.096095] xor: automatically using best checksumming function: [ 0.105335] avx : 7552.000 MB/sec [ 0.105356] pinctrl core: initialized pinctrl subsystem [ 0.105577] RTC time: 9:50:10, date: 05/06/17 [ 0.105895] NET: Registered protocol family 16 [ 0.110362] cpuidle: using governor ladder [ 0.114371] cpuidle: using governor menu [ 0.114455] Simple Boot Flag at 0x44 set to 0x1 [ 0.114547] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.114551] ACPI: bus type PCI registered [ 0.114555] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.114716] PCI: Using configuration type 1 for base access [ 0.115231] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.137467] raid6: sse2x1 gen() 2144 MB/s [ 0.154508] raid6: sse2x1 xor() 1679 MB/s [ 0.171546] raid6: sse2x2 gen() 2683 MB/s [ 0.188608] raid6: sse2x2 xor() 1958 MB/s [ 0.205649] raid6: sse2x4 gen() 3093 MB/s [ 0.222697] raid6: sse2x4 xor() 2308 MB/s [ 0.222701] raid6: using algorithm sse2x4 gen() 3093 MB/s [ 0.222704] raid6: .... xor() 2308 MB/s, rmw enabled [ 0.222708] raid6: using ssse3x2 recovery algorithm [ 0.222951] ACPI: Added _OSI(Module Device) [ 0.222955] ACPI: Added _OSI(Processor Device) [ 0.222959] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.222963] ACPI: Added _OSI(Processor Aggregator Device) [ 0.229967] ACPI: Executed 1 blocks of module-level executable AML code [ 0.235705] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 0.236771] ACPI: Dynamic OEM Table Load: [ 0.236795] ACPI: SSDT 0xFFFF88015A5E1800 000727 (v01 PmRef Cpu0Cst 00003001 INTL 20100121) [ 0.238296] ACPI: Dynamic OEM Table Load: [ 0.238313] ACPI: SSDT 0xFFFF88015A631000 000303 (v01 PmRef ApIst 00003000 INTL 20100121) [ 0.239598] ACPI: Dynamic OEM Table Load: [ 0.239612] ACPI: SSDT 0xFFFF88015A5D7000 000119 (v01 PmRef ApCst 00003000 INTL 20100121) [ 0.241916] ACPI : EC: EC started [ 0.246892] ACPI: Interpreter enabled [ 0.246954] ACPI: (supports S0 S3 S4 S5) [ 0.246958] ACPI: Using IOAPIC for interrupt routing [ 0.247029] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.258978] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.258993] acpi PNP0A08:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.259085] \_SB_.PCI0:_OSC invalid UUID [ 0.259089] _OSC request data:1 1e 0 [ 0.259100] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM [ 0.259130] acpi PNP0A08:00: MMCONFIG is disabled, can't access extended PCI configuration space under this bridge. [ 0.259993] PCI host bridge to bus 0000:00 [ 0.260001] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.260007] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.260012] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.260017] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window] [ 0.260023] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.260044] pci 0000:00:00.0: [8086:0104] type 00 class 0x060000 [ 0.260251] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400 [ 0.260333] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.260410] pci 0000:00:01.0: System wakeup disabled by ACPI [ 0.260524] pci 0000:00:02.0: [8086:0126] type 00 class 0x030000 [ 0.260560] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc03fffff 64bit] [ 0.260577] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref] [ 0.260589] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f] [ 0.260872] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000 [ 0.260950] pci 0000:00:16.0: reg 0x10: [mem 0xc3604000-0xc360400f 64bit] [ 0.261086] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.261274] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320 [ 0.261758] pci 0000:00:1a.0: reg 0x10: [mem 0xc3609000-0xc36093ff] [ 0.264258] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.264549] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 0.264663] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300 [ 0.264725] pci 0000:00:1b.0: reg 0x10: [mem 0xc3600000-0xc3603fff 64bit] [ 0.264867] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 0.264946] pci 0000:00:1b.0: System wakeup disabled by ACPI [ 0.265062] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400 [ 0.265226] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.265306] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 0.265408] pci 0000:00:1c.1: [8086:1c12] type 01 class 0x060400 [ 0.265568] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold [ 0.265647] pci 0000:00:1c.1: System wakeup disabled by ACPI [ 0.265746] pci 0000:00:1c.2: [8086:1c14] type 01 class 0x060400 [ 0.265906] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.265989] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 0.266118] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320 [ 0.266574] pci 0000:00:1d.0: reg 0x10: [mem 0xc3608000-0xc36083ff] [ 0.269079] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.269343] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 0.269451] pci 0000:00:1f.0: [8086:1c49] type 00 class 0x060100 [ 0.269792] pci 0000:00:1f.2: [8086:1c03] type 00 class 0x010601 [ 0.269858] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f] [ 0.269880] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097] [ 0.269900] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087] [ 0.269920] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093] [ 0.269941] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f] [ 0.269961] pci 0000:00:1f.2: reg 0x24: [mem 0xc3607000-0xc36077ff] [ 0.270047] pci 0000:00:1f.2: PME# supported from D3hot [ 0.270204] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500 [ 0.270257] pci 0000:00:1f.3: reg 0x10: [mem 0xc3605000-0xc36050ff 64bit] [ 0.270309] pci 0000:00:1f.3: reg 0x20: [io 0x5040-0x505f] [ 0.270612] pci 0000:01:00.0: [1002:6760] type 00 class 0x030000 [ 0.270666] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xafffffff 64bit pref] [ 0.270690] pci 0000:01:00.0: reg 0x18: [mem 0xc2600000-0xc261ffff 64bit] [ 0.270705] pci 0000:01:00.0: reg 0x20: [io 0x4000-0x40ff] [ 0.270731] pci 0000:01:00.0: reg 0x30: [mem 0xfffe0000-0xffffffff pref] [ 0.270792] pci 0000:01:00.0: supports D1 D2 [ 0.270885] pci 0000:01:00.0: System wakeup disabled by ACPI [ 0.272256] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.272263] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.272270] pci 0000:00:01.0: bridge window [mem 0xc2600000-0xc35fffff] [ 0.272280] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 0.272434] pci 0000:02:00.0: [1814:5390] type 00 class 0x028000 [ 0.272525] pci 0000:02:00.0: reg 0x10: [mem 0xc2500000-0xc250ffff] [ 0.274289] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.274303] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff] [ 0.274462] pci 0000:03:00.0: [10ec:8136] type 00 class 0x020000 [ 0.274536] pci 0000:03:00.0: reg 0x10: [io 0x3000-0x30ff] [ 0.274595] pci 0000:03:00.0: reg 0x18: [mem 0xc0404000-0xc0404fff 64bit pref] [ 0.274632] pci 0000:03:00.0: reg 0x20: [mem 0xc0400000-0xc0403fff 64bit pref] [ 0.274747] pci 0000:03:00.0: supports D1 D2 [ 0.274751] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.274848] pci 0000:03:00.0: System wakeup disabled by ACPI [ 0.276280] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.276291] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.276309] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.276469] pci 0000:04:00.0: [10ec:5209] type 00 class 0xff0000 [ 0.276535] pci 0000:04:00.0: reg 0x10: [mem 0xc1500000-0xc1500fff] [ 0.276743] pci 0000:04:00.0: supports D1 D2 [ 0.276748] pci 0000:04:00.0: PME# supported from D1 D2 D3hot [ 0.278287] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.278297] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.278306] pci 0000:00:1c.2: bridge window [mem 0xc1500000-0xc24fffff] [ 0.278320] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc14fffff 64bit pref] [ 0.279442] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.279578] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.279707] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.279835] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15) [ 0.279961] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.280089] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.280220] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15) [ 0.280369] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled. [ 0.280606] ACPI: Enabled 4 GPEs in block 00 to 3F [ 0.280760] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62 [ 0.281006] vgaarb: setting as boot device: PCI:0000:00:02.0 [ 0.281011] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none [ 0.281023] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none [ 0.281026] vgaarb: loaded [ 0.281030] vgaarb: bridge control possible 0000:01:00.0 [ 0.281033] vgaarb: no bridge control possible 0000:00:02.0 [ 0.281584] SCSI subsystem initialized [ 0.281692] libata version 3.00 loaded. [ 0.282006] PCI: Using ACPI for IRQ routing [ 0.282011] PCI: pci_cache_line_size set to 64 bytes [ 0.282144] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff] [ 0.282148] e820: reserve RAM buffer [mem 0x9ce3f000-0x9fffffff] [ 0.282152] e820: reserve RAM buffer [mem 0x9d000000-0x9fffffff] [ 0.282156] e820: reserve RAM buffer [mem 0x15fe00000-0x15fffffff] [ 0.282470] NetLabel: Initializing [ 0.282473] NetLabel: domain hash size = 128 [ 0.282476] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.282511] NetLabel: unlabeled traffic allowed by default [ 0.282621] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.282636] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.284671] amd_nb: Cannot enumerate AMD northbridges [ 0.284708] clocksource: Switched to clocksource hpet [ 0.300960] pnp: PnP ACPI init [ 0.301561] system 00:00: [io 0x0680-0x069f] has been reserved [ 0.301569] system 00:00: [io 0x1004-0x1013] has been reserved [ 0.301578] system 00:00: [io 0xffff] has been reserved [ 0.301583] system 00:00: [io 0xffff] has been reserved [ 0.301590] system 00:00: [io 0x0400-0x0453] could not be reserved [ 0.301595] system 00:00: [io 0x0454-0x0457] has been reserved [ 0.301600] system 00:00: [io 0x0458-0x047f] has been reserved [ 0.301605] system 00:00: [io 0x0500-0x057f] has been reserved [ 0.301611] system 00:00: [io 0x164e-0x164f] has been reserved [ 0.301616] system 00:00: [io 0x0380-0x0387] has been reserved [ 0.301627] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.301698] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.301818] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.301913] pnp 00:03: Plug and Play ACPI device, IDs SYN1e40 SYN1e00 SYN0002 PNP0f13 (active) [ 0.302250] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 0.302257] system 00:04: [mem 0xfed10000-0xfed17fff] has been reserved [ 0.302262] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved [ 0.302268] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved [ 0.302273] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved [ 0.302279] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved [ 0.302284] system 00:04: [mem 0xfed90000-0xfed93fff] has been reserved [ 0.302290] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved [ 0.302296] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved [ 0.302302] system 00:04: [mem 0x9fa00000-0x9fa00fff] has been reserved [ 0.302310] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.302856] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved [ 0.302862] system 00:05: [mem 0x40000000-0x401fffff] could not be reserved [ 0.302870] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.302913] pnp: PnP ACPI: found 6 devices [ 0.312437] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.312458] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffe0000-0xffffffff pref]: no compatible bridge window [ 0.312533] pci 0000:01:00.0: BAR 6: assigned [mem 0xc2620000-0xc263ffff pref] [ 0.312540] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.312546] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff] [ 0.312555] pci 0000:00:01.0: bridge window [mem 0xc2600000-0xc35fffff] [ 0.312562] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] [ 0.312572] pci 0000:00:1c.0: PCI bridge to [bus 02] [ 0.312584] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff] [ 0.312603] pci 0000:00:1c.1: PCI bridge to [bus 03] [ 0.312610] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff] [ 0.312626] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.312640] pci 0000:00:1c.2: PCI bridge to [bus 04] [ 0.312647] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff] [ 0.312659] pci 0000:00:1c.2: bridge window [mem 0xc1500000-0xc24fffff] [ 0.312668] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc14fffff 64bit pref] [ 0.312685] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.312691] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.312697] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.312712] pci_bus 0000:00: resource 7 [mem 0x9fa00000-0xfeafffff window] [ 0.312718] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff] [ 0.312723] pci_bus 0000:01: resource 1 [mem 0xc2600000-0xc35fffff] [ 0.312728] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref] [ 0.312733] pci_bus 0000:02: resource 1 [mem 0xc2500000-0xc25fffff] [ 0.312738] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] [ 0.312743] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref] [ 0.312748] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff] [ 0.312753] pci_bus 0000:04: resource 1 [mem 0xc1500000-0xc24fffff] [ 0.312758] pci_bus 0000:04: resource 2 [mem 0xc0500000-0xc14fffff 64bit pref] [ 0.312838] NET: Registered protocol family 2 [ 0.313275] TCP established hash table entries: 32768 (order: 6, 262144 bytes) [ 0.313477] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) [ 0.313654] TCP: Hash tables configured (established 32768 bind 32768) [ 0.313736] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.313785] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.313921] NET: Registered protocol family 1 [ 0.313965] pci 0000:00:02.0: Video device with shadowed ROM [ 0.335941] PCI: CLS 64 bytes, default 64 [ 0.336064] Trying to unpack rootfs image as initramfs... [ 0.738227] Freeing initrd memory: 11948K (ffff880037445000 - ffff880037ff0000) [ 0.738273] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.738280] software IO TLB [mem 0x98e3f000-0x9ce3f000] (64MB) mapped at [ffff880098e3f000-ffff88009ce3efff] [ 0.738459] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer [ 0.738463] hw unit of domain pp0-core 2^-16 Joules [ 0.738466] hw unit of domain package 2^-16 Joules [ 0.738469] hw unit of domain pp1-gpu 2^-16 Joules [ 0.739405] audit: initializing netlink subsys (disabled) [ 0.739434] audit: type=2000 audit(1494064210.695:1): initialized [ 0.740502] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.744619] zbud: loaded [ 0.745116] VFS: Disk quotas dquot_6.6.0 [ 0.745217] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.747090] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) [ 0.747173] io scheduler noop registered [ 0.747182] io scheduler deadline registered [ 0.747271] io scheduler cfq registered (default) [ 0.748561] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.748582] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.748740] vesafb: mode is 800x600x16, linelength=1600, pages=33 [ 0.748744] vesafb: scrolling: redraw [ 0.748749] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.748781] vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90000800000, using 1875k, total 32704k [ 0.795725] Console: switching to colour frame buffer device 100x37 [ 0.842121] fb0: VESA VGA frame buffer device [ 0.842173] intel_idle: MWAIT substates: 0x21120 [ 0.842177] intel_idle: v0.4.1 model 0x2A [ 0.842180] intel_idle: lapic_timer_reliable_states 0xffffffff [ 0.842657] GHES: HEST is not enabled! [ 0.842843] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.843808] Linux agpgart interface v0.103 [ 0.851090] brd: module loaded [ 0.851507] ahci 0000:00:1f.2: version 3.0 [ 0.862750] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode [ 0.862762] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst [ 0.865980] scsi host0: ahci [ 0.866289] scsi host1: ahci [ 0.866579] scsi host2: ahci [ 0.866833] scsi host3: ahci [ 0.867052] scsi host4: ahci [ 0.867280] scsi host5: ahci [ 0.867391] ata1: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607100 irq 24 [ 0.867395] ata2: DUMMY [ 0.867398] ata3: DUMMY [ 0.867401] ata4: DUMMY [ 0.867406] ata5: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607300 irq 24 [ 0.867409] ata6: DUMMY [ 0.867606] i8042: PNP: PS/2 Controller [PNP0303
S2K,PNP0f13
S2M] at 0x60,0x64 irq 1,12 [ 0.878497] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.878510] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.878853] mousedev: PS/2 mouse device common for all mice [ 0.879595] rtc_cmos 00:01: RTC can wake from S4 [ 0.879811] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.879853] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.879893] Intel P-state driver initializing. [ 0.880161] ledtrig-cpu: registered to indicate activity on CPUs [ 0.880528] Key type dns_resolver registered [ 0.880535] mpls_gso: MPLS GSO support [ 0.881009] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29 [ 0.881030] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29 [ 0.881054] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29 [ 0.881077] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29 [ 0.881178] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.881561] registered taskstats version 1 [ 0.881617] zswap: loaded using pool lzo/zbud [ 0.882753] Btrfs loaded [ 0.883711] Magic number: 1:185:828 [ 0.883888] rtc_cmos 00:01: setting system clock to 2017-05-06 09:50:11 UTC (1494064211) [ 0.884027] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 0.884250] PM: Checking hibernation image partition UUID=38d495d0-a8e5-4197-8d39-78959791f3a4 [ 0.893404] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.171772] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.173764] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.178003] ata1.00: ATA-9: ST500LM012 HN-M500MBB, 2AR10002, max UDMA/133 [ 1.178013] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.184248] ata1.00: configured for UDMA/133 [ 1.184994] scsi 0:0:0:0: Direct-Access ATA ST500LM012 HN-M5 0002 PQ: 0 ANSI: 5 [ 1.185602] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.185611] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.185954] sd 0:0:0:0: [sda] Write Protect is off [ 1.185965] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.186141] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.186170] ata5.00: ATAPI: hp DVD-RAM UJ8B1, H.03, max UDMA/100 [ 1.198810] ata5.00: configured for UDMA/100 [ 1.211591] scsi 4:0:0:0: CD-ROM hp DVD-RAM UJ8B1 H.03 PQ: 0 ANSI: 5 [ 1.309145] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 > sda4 [ 1.311403] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.311429] PM: Hibernation image not present or could not be loaded. [ 1.313706] Freeing unused kernel memory: 1332K (ffffffff81d31000 - ffffffff81e7e000) [ 1.313711] Write protecting the kernel read-only data: 12288k [ 1.314746] Freeing unused kernel memory: 1224K (ffff8800016ce000 - ffff880001800000) [ 1.319028] Freeing unused kernel memory: 564K (ffff880001b73000 - ffff880001c00000) [ 1.443753] dracut: dracut-038 [ 1.716184] random: systemd-udevd: uninitialized urandom read (16 bytes read, 24 bits of entropy available) [ 1.739649] tsc: Refined TSC clocksource calibration: 2494.338 MHz [ 1.739664] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f454f0625, max_idle_ns: 440795228661 ns [ 1.822744] [drm] Initialized drm 1.1.0 20060810 [ 1.853413] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 1.853803] ACPI: Lid Switch [LID0] [ 1.854346] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 1.854363] ACPI: Power Button [PWRB] [ 1.855765] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.855783] ACPI: Power Button [PWRF] [ 2.096226] [drm] Memory usable by graphics device = 2048M [ 2.096240] checking generic (b0000000 1ff0000) vs hw (b0000000 10000000) [ 2.096246] fb: switching to inteldrmfb from VESA VGA [ 2.096326] Console: switching to colour dummy device 80x25 [ 2.096566] [drm] Replacing VGA console driver [ 2.102897] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.102905] [drm] Driver supports precise vblank timestamp query. [ 2.104137] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 2.111480] [drm] radeon kernel modesetting enabled. [ 2.111510] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle [ 2.116620] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 2.116630] AMD IOMMUv2 functionality not available on this system [ 2.129088] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 2.132414] acpi device:1a: registered as cooling_device0 [ 2.132581] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/LNXVIDEO:00/input/input5 [ 2.134732] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.137230] CRAT table not found [ 2.137240] Finished initializing topology ret=0 [ 2.137818] acpi device:1f: registered as cooling_device1 [ 2.137990] kfd kfd: Initialized module [ 2.138143] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6 [ 2.138226] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 2.138642] radeon 0000:01:00.0: enabling device (0000 -> 0003) [ 2.139114] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x166C). [ 2.139141] [drm] register mmio base: 0xC2600000 [ 2.139144] [drm] register mmio size: 131072 [ 2.139149] vga_switcheroo: enabled [ 2.139373] ATPX version 1, functions 0x00000001 [ 2.141463] fbcon: inteldrmfb (fb0) is primary device [ 2.233075] ATOM BIOS: HP [ 2.233601] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 2.233605] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 2.233607] [drm] Detected VRAM RAM=1024M, BAR=256M [ 2.233609] [drm] RAM width 64bits DDR [ 2.233782] [TTM] Zone kernel: Available graphics memory: 1997384 kiB [ 2.233784] [TTM] Initializing pool allocator [ 2.233795] [TTM] Initializing DMA pool allocator [ 2.233833] [drm] radeon: 1024M of VRAM memory ready [ 2.233835] [drm] radeon: 1024M of GTT memory ready. [ 2.233865] [drm] Loading CAICOS Microcode [ 2.234078] [drm] Internal thermal controller without fan control [ 2.240056] [drm] radeon: dpm initialized [ 2.240251] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 2.242108] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 2.246151] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 2.246318] radeon 0000:01:00.0: WB enabled [ 2.246324] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 2.246328] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 2.247888] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 2.247891] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.247892] [drm] Driver supports precise vblank timestamp query. [ 2.247895] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 2.247970] radeon 0000:01:00.0: radeon: using MSI. [ 2.248045] [drm] radeon: irq initialized. [ 2.265366] [drm] ring test on 0 succeeded in 2 usecs [ 2.265381] [drm] ring test on 3 succeeded in 8 usecs [ 2.442906] [drm] ring test on 5 succeeded in 2 usecs [ 2.442916] [drm] UVD initialized successfully. [ 2.443511] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.443625] [drm] ib test on ring 3 succeeded in 0 usecs [ 2.739985] clocksource: Switched to clocksource tsc [ 2.864375] Console: switching to colour frame buffer device 200x56 [ 2.874273] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.095776] [drm] ib test on ring 5 succeeded [ 3.096940] [drm] Radeon Display Connectors [ 3.096945] [drm] Connector 0: [ 3.096948] [drm] VGA-2 [ 3.096952] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [ 3.096955] [drm] Encoders: [ 3.096958] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.138934] radeon 0000:01:00.0: No connectors reported connected with modes [ 3.138941] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.141107] [drm] fb mappable at 0xA0475000 [ 3.141110] [drm] vram apper at 0xA0000000 [ 3.141113] [drm] size 3145728 [ 3.141116] [drm] fb depth is 24 [ 3.141119] [drm] pitch is 4096 [ 3.141311] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device [ 3.141457] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 1 [ 3.147331] dracut: Starting plymouth daemon [ 6.598839] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 27 [ 6.625583] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.625595] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.626159] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 6.638968] ACPI: bus type USB registered [ 6.639073] usbcore: registered new interface driver usbfs [ 6.639118] usbcore: registered new interface driver hub [ 6.639223] usbcore: registered new device driver usb [ 6.660411] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.662768] ehci-pci: EHCI PCI platform driver [ 6.663163] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 6.663188] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 6.663221] ehci-pci 0000:00:1a.0: debug port 2 [ 6.667162] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 6.667222] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc3609000 [ 6.672327] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 6.672493] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.672504] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.672512] usb usb1: Product: EHCI Host Controller [ 6.672520] usb usb1: Manufacturer: Linux 4.4.59-desktop-1.mga5 ehci_hcd [ 6.672528] usb usb1: SerialNumber: 0000:00:1a.0 [ 6.672991] hub 1-0:1.0: USB hub found [ 6.673009] hub 1-0:1.0: 2 ports detected [ 6.673690] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 6.673715] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 6.673747] ehci-pci 0000:00:1d.0: debug port 2 [ 6.677685] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 6.677733] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc3608000 [ 6.683334] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 6.683512] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.683522] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.683531] usb usb2: Product: EHCI Host Controller [ 6.683539] usb usb2: Manufacturer: Linux 4.4.59-desktop-1.mga5 ehci_hcd [ 6.683546] usb usb2: SerialNumber: 0000:00:1d.0 [ 6.684356] hub 2-0:1.0: USB hub found [ 6.684388] hub 2-0:1.0: 2 ports detected [ 6.941573] random: nonblocking pool is initialized [ 6.974316] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 6.986313] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 7.088636] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 7.088645] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.089111] hub 1-1:1.0: USB hub found [ 7.089251] hub 1-1:1.0: 6 ports detected [ 7.100629] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 7.100638] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.101133] hub 2-1:1.0: USB hub found [ 7.101256] hub 2-1:1.0: 6 ports detected [ 7.375290] usb 2-1.1: new full-speed USB device number 3 using ehci-pci [ 7.460597] usb 2-1.1: not running at top speed; connect to a high speed hub [ 7.461099] usb 2-1.1: New USB device found, idVendor=1a40, idProduct=0101 [ 7.461106] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7.461111] usb 2-1.1: Product: USB 2.0 Hub [Safe] [ 7.461571] hub 2-1.1:1.0: USB hub found [ 7.461729] hub 2-1.1:1.0: 4 ports detected [ 7.535274] usb 2-1.5: new high-speed USB device number 4 using ehci-pci [ 7.665969] usb 2-1.5: New USB device found, idVendor=05c8, idProduct=021e [ 7.665978] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 7.665984] usb 2-1.5: Product: HP Webcam-101 [ 7.665989] usb 2-1.5: Manufacturer: HP Webcam-101 [ 7.665994] usb 2-1.5: SerialNumber: HP Webcam-101 [ 7.735274] usb 2-1.1.2: new full-speed USB device number 5 using ehci-pci [ 7.821954] usb 2-1.1.2: New USB device found, idVendor=062a, idProduct=4102 [ 7.821965] usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.821970] usb 2-1.1.2: Product: 2.4G Wireless Mouse [ 7.821975] usb 2-1.1.2: Manufacturer: MOSART Semi. [ 7.839638] hidraw: raw HID events driver (C) Jiri Kosina [ 7.850574] usbcore: registered new interface driver usbhid [ 7.850583] usbhid: USB HID core driver [ 7.852516] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.0/0003:062A:4102.0001/input/input7 [ 7.852936] hid-generic 0003:062A:4102.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:1d.0-1.1.2/input0 [ 8.066403] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 8.066412] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 8.066420] PM: Marking nosave pages: [mem 0x9ce3f000-0x9cffefff] [ 8.066443] PM: Marking nosave pages: [mem 0x9d000000-0xffffffff] [ 8.069476] PM: Basic memory bitmaps created [ 8.082948] PM: Basic memory bitmaps freed [ 8.082966] video LNXVIDEO:00: Restoring backlight state [ 8.084155] video LNXVIDEO:01: Restoring backlight state [ 8.090959] PM: Starting manual resume from disk [ 8.090970] PM: Hibernation image partition 8:7 present [ 8.090974] PM: Looking for hibernation image. [ 8.108659] PM: Image not found (code -22) [ 8.108668] PM: Hibernation image not present or could not be loaded. [ 8.173016] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 8.469133] dracut: Checking ext4: /dev/disk/by-uuid/33421747-4cff-42b7-878f-59d2e4aa1c0d [ 8.469645] dracut: issuing e2fsck -a /dev/disk/by-uuid/33421747-4cff-42b7-878f-59d2e4aa1c0d [ 8.534513] dracut: /dev/disk/by-uuid/33421747-4cff-42b7-878f-59d2e4aa1c0d: clean, 260884/1957888 files, 3821700/7830852 blocks [ 8.538715] dracut: Mounting /dev/disk/by-uuid/33421747-4cff-42b7-878f-59d2e4aa1c0d with -o defaults [ 8.597615] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 9.024042] dracut: Mounted root filesystem /dev/sda6 [ 9.270066] dracut: Switching root [ 9.304565] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.763242] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time. [ 10.200897] NET: Registered protocol family 10 [ 12.891673] EXT4-fs (sda6): re-mounted. Opts: (null) [ 13.212226] RPC: Registered named UNIX socket transport module. [ 13.212235] RPC: Registered udp transport module. [ 13.212238] RPC: Registered tcp transport module. [ 13.212241] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 15.797589] Non-volatile memory driver v1.3 [ 17.472844] ACPI: Battery Slot [BAT0] (battery absent) [ 17.517554] ACPI: AC Adapter [ACAD] (on-line) [ 17.785937] [Firmware Bug]: Invalid critical threshold (0) [ 17.788030] thermal LNXTHERM:00: registered as thermal_zone0 [ 17.788037] ACPI: Thermal Zone [TZ01] (54 C) [ 17.941755] wmi: Mapper loaded [ 18.020638] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254) [ 18.020656] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 18.020665] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254) [ 18.020676] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.WMID.GPIO) (20150930/utaddress-254) [ 18.020687] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.GPIO) (20150930/utaddress-254) [ 18.020697] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254) [ 18.020707] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO) (20150930/utaddress-254) [ 18.020716] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 18.020720] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254) [ 18.020729] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.WMID.GPIO) (20150930/utaddress-254) [ 18.020737] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.GPIO) (20150930/utaddress-254) [ 18.020746] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254) [ 18.020756] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO) (20150930/utaddress-254) [ 18.020764] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 18.020768] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254) [ 18.020776] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.WMID.GPIO) (20150930/utaddress-254) [ 18.020785] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.GPIO) (20150930/utaddress-254) [ 18.020794] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254) [ 18.020803] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO) (20150930/utaddress-254) [ 18.020811] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 18.020814] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 18.084180] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 18.103769] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.448514] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 18.679928] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 18.679955] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 18.680761] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc900007ac000, 80:c1:6e:48:d2:36, XID 00a00000 IRQ 29 [ 19.300977] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4828] [ 19.381424] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1678, fw id: 706628 [ 19.431716] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 19.524013] input: HP WMI hotkeys as /devices/virtual/input/input9 [ 19.622116] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected [ 19.626378] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected [ 19.628990] iTCO_vendor_support: vendor-support=0 [ 19.729092] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 19.729127] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 19.729215] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 19.835700] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 19.835704] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 19.835705] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 19.835707] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 19.835708] snd_hda_codec_idt hdaudioC0D0: inputs: [ 19.835710] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11 [ 19.835711] snd_hda_codec_idt hdaudioC0D0: Mic=0xc [ 19.938274] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 20.061444] r8169 0000:03:00.0 eno1: renamed from eth0 [ 20.141132] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 20.141742] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 20.141787] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.141831] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 20.147564] rt2800pci 0000:02:00.0 wlp2s0: renamed from wlan0 [ 21.978333] AVX version of gcm_enc/dec engaged. [ 21.978336] AES CTR mode by8 optimization enabled [ 23.369602] cfg80211: World regulatory domain updated: [ 23.369607] cfg80211: DFS Master region: unset [ 23.369609] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 23.369612] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 23.369615] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 23.369617] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 23.369620] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 23.369623] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 23.369625] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 23.369627] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 23.369629] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 23.552005] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 23.552010] Disabling lock debugging due to kernel taint [ 23.569231] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3740 MBytes. [ 23.569361] <6>[fglrx] vendor: 1002 device: 6760 revision: 0 count: 1 [ 23.569537] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100 [ 23.569606] <6>[fglrx] Kernel PAT support is enabled [ 23.569618] <6>[fglrx] module loaded - fglrx 15.30.3 [Dec 17 2015] with 1 minors [ 23.582995] cfg80211: Regulatory domain changed to country: US [ 23.582998] cfg80211: DFS Master region: FCC [ 23.582999] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 23.583001] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 23.583003] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A) [ 23.583004] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 23.583006] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s) [ 23.583007] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 23.583008] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 24.907132] media: Linux media interface: v0.10 [ 24.990999] Linux video capture interface: v2.00 [ 25.473493] uvcvideo: Found UVC 1.00 device HP Webcam-101 (05c8:021e) [ 25.487855] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14 [ 25.487924] usbcore: registered new interface driver uvcvideo [ 25.487926] USB Video Class driver (1.1.1) [ 25.820509] systemd-journald[511]: Received request to flush runtime journal from PID 1 [ 26.362535] fuse init (API version 7.23) [ 26.592271] intel_rapl: Found RAPL domain package [ 26.592274] intel_rapl: Found RAPL domain core [ 26.592275] intel_rapl: Found RAPL domain uncore [ 26.592279] intel_rapl: RAPL package 0 domain package locked by BIOS [ 27.033642] Adding 4086764k swap on /dev/sda7. Priority:-1 extents:1 across:4086764k FS [ 27.949854] ata1.00: configured for UDMA/133 [ 27.949867] ata1: EH complete [ 28.694515] EXT4-fs (sda6): re-mounted. Opts: commit=0 [ 29.480276] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 30.683813] ata1.00: configured for UDMA/133 [ 30.683819] ata1: EH complete [ 30.697764] EXT4-fs (sda6): re-mounted. Opts: commit=0 [ 30.719488] EXT4-fs (sda8): re-mounted. Opts: commit=0 [ 30.832187] device-mapper: uevent: version 1.0.3 [ 30.832268] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 42.463996] r8169 0000:03:00.0 eno1: link down [ 42.464057] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 42.482437] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 42.486698] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 42.486793] radeon 0000:01:00.0: WB enabled [ 42.486795] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 42.486797] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 42.488344] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 42.504737] [drm] ring test on 0 succeeded in 2 usecs [ 42.504754] [drm] ring test on 3 succeeded in 9 usecs [ 42.514439] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin' [ 42.545466] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40 [ 42.634620] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 42.682109] [drm] ring test on 5 succeeded in 2 usecs [ 42.682119] [drm] UVD initialized successfully. [ 42.682209] [drm] ib test on ring 0 succeeded in 0 usecs [ 42.682293] [drm] ib test on ring 3 succeeded in 0 usecs [ 42.860784] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 43.003336] NET: Registered protocol family 17 [ 43.334022] [drm] ib test on ring 5 succeeded [ 43.587231] wlp2s0: authenticate with 54:64:d9:4c:67:d6 [ 43.595596] wlp2s0: send auth to 54:64:d9:4c:67:d6 (try 1/3) [ 43.618646] wlp2s0: authenticated [ 43.618982] wlp2s0: associate with 54:64:d9:4c:67:d6 (try 1/3) [ 43.625799] wlp2s0: RX AssocResp from 54:64:d9:4c:67:d6 (capab=0x1411 status=0 aid=1) [ 43.625931] wlp2s0: associated [ 43.625967] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 43.711313] vboxdrv: Found 4 processor cores [ 43.727436] vboxdrv: TSC mode is Invariant, tentative frequency 2494312479 Hz [ 43.727439] vboxdrv: Successfully loaded version 5.1.18 (interface 0x00280000) [ 43.743388] VBoxNetFlt: Successfully started. [ 43.758765] VBoxNetAdp: Successfully started. [ 56.148961] ip_tables: (C) 2000-2006 Netfilter Core Team [ 58.350440] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 65.704302] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 65.899975] Netfilter messages via NETLINK v0.30. [ 66.049112] ctnetlink v0.93: registering with nfnetlink. [ 69.549022] Adjusting tsc more than 11% (7774752 vs 7465993) [ 71.013588] xt_CT: No such helper "irc" [ 71.017063] xt_CT: No such helper "irc-0" [ 71.021851] xt_CT: No such helper "netbios-ns" [ 71.025270] xt_CT: No such helper "pptp" [ 71.035294] xt_CT: No such helper "snmp" [ 71.189169] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 72.247137] xt_addrtype: ipv6 does not support BROADCAST matching [ 73.250141] ip_set: protocol 6 [ 73.674871] netfilter PSD loaded - (c) astaro AG [ 73.713479] IFWLOG: register target [ 77.762586] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 77.766840] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 77.766935] radeon 0000:01:00.0: WB enabled [ 77.766938] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 77.766939] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 77.768493] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 77.785085] [drm] ring test on 0 succeeded in 2 usecs [ 77.785097] [drm] ring test on 3 succeeded in 8 usecs [ 77.962425] [drm] ring test on 5 succeeded in 2 usecs [ 77.962434] [drm] UVD initialized successfully. [ 77.962518] [drm] ib test on ring 0 succeeded in 0 usecs [ 77.962595] [drm] ib test on ring 3 succeeded in 0 usecs [ 78.614187] [drm] ib test on ring 5 succeeded [ 89.932897] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 89.937175] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 89.937270] radeon 0000:01:00.0: WB enabled [ 89.937272] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 89.937274] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 89.938851] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 89.955242] [drm] ring test on 0 succeeded in 2 usecs [ 89.955256] [drm] ring test on 3 succeeded in 4 usecs [ 90.132608] [drm] ring test on 5 succeeded in 2 usecs [ 90.132617] [drm] UVD initialized successfully. [ 90.132701] [drm] ib test on ring 0 succeeded in 0 usecs [ 90.132779] [drm] ib test on ring 3 succeeded in 0 usecs [ 90.784466] [drm] ib test on ring 5 succeeded [ 105.752709] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 105.756945] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 105.757040] radeon 0000:01:00.0: WB enabled [ 105.757043] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 105.757045] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 105.758592] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 105.775173] [drm] ring test on 0 succeeded in 2 usecs [ 105.775187] [drm] ring test on 3 succeeded in 8 usecs [ 105.952523] [drm] ring test on 5 succeeded in 2 usecs [ 105.952533] [drm] UVD initialized successfully. [ 105.952620] [drm] ib test on ring 0 succeeded in 0 usecs [ 105.952697] [drm] ib test on ring 3 succeeded in 0 usecs [ 106.604154] [drm] ib test on ring 5 succeeded [ 116.927112] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 116.931392] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 116.931487] radeon 0000:01:00.0: WB enabled [ 116.931490] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 116.931491] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 116.933043] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 116.949602] [drm] ring test on 0 succeeded in 2 usecs [ 116.949618] [drm] ring test on 3 succeeded in 9 usecs [ 117.126963] [drm] ring test on 5 succeeded in 2 usecs [ 117.126975] [drm] UVD initialized successfully. [ 117.127066] [drm] ib test on ring 0 succeeded in 0 usecs [ 117.127143] [drm] ib test on ring 3 succeeded in 0 usecs [ 117.780378] [drm] ib test on ring 5 succeeded [ 119.490976] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=56037 LEN=301 [ 120.491038] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=56037 LEN=301 [ 121.491424] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=56037 LEN=301 [ 122.493444] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=56037 LEN=301 [ 126.891207] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=34585 LEN=301 [ 127.889625] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=34585 LEN=301 [ 128.886298] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=34585 LEN=301 [ 129.888260] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=34585 LEN=301 [ 175.733318] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 175.880059] usb 1-1.1: New USB device found, idVendor=174c, idProduct=55aa [ 175.880070] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 175.880075] usb 1-1.1: Product: USB3.0 External HDD [ 175.880080] usb 1-1.1: Manufacturer: GODO [ 175.880084] usb 1-1.1: SerialNumber: 201401000045 [ 175.933866] usbcore: registered new interface driver usb-storage [ 180.562447] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 180.566669] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 180.566763] radeon 0000:01:00.0: WB enabled [ 180.566766] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 180.566767] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 180.568332] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 180.584773] [drm] ring test on 0 succeeded in 2 usecs [ 180.584786] [drm] ring test on 3 succeeded in 8 usecs [ 180.762122] [drm] ring test on 5 succeeded in 2 usecs [ 180.762132] [drm] UVD initialized successfully. [ 180.762219] [drm] ib test on ring 0 succeeded in 0 usecs [ 180.762296] [drm] ib test on ring 3 succeeded in 0 usecs [ 181.414035] [drm] ib test on ring 5 succeeded [ 206.703542] usb 1-1.1: USB disconnect, device number 3 [ 223.159725] usb 1-1.1: new high-speed USB device number 4 using ehci-pci [ 223.306672] usb 1-1.1: New USB device found, idVendor=174c, idProduct=55aa [ 223.306683] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 223.306689] usb 1-1.1: Product: USB3.0 External HDD [ 223.306694] usb 1-1.1: Manufacturer: GODO [ 223.306698] usb 1-1.1: SerialNumber: 201401000045 [ 239.481935] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=59336 LEN=301 [ 240.483321] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=59336 LEN=301 [ 241.488035] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=59336 LEN=301 [ 242.481850] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=59336 LEN=301 [ 286.445192] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 286.449443] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 286.449538] radeon 0000:01:00.0: WB enabled [ 286.449540] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 286.449541] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 286.451117] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 286.467705] [drm] ring test on 0 succeeded in 2 usecs [ 286.467718] [drm] ring test on 3 succeeded in 8 usecs [ 286.645048] [drm] ring test on 5 succeeded in 2 usecs [ 286.645057] [drm] UVD initialized successfully. [ 286.645141] [drm] ib test on ring 0 succeeded in 0 usecs [ 286.645219] [drm] ib test on ring 3 succeeded in 0 usecs [ 287.296784] [drm] ib test on ring 5 succeeded [ 342.349767] usb 1-1.1: USB disconnect, device number 4 [ 355.816594] usb 1-1.1: new high-speed USB device number 5 using ehci-pci [ 355.963303] usb 1-1.1: New USB device found, idVendor=174c, idProduct=55aa [ 355.963314] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 355.963320] usb 1-1.1: Product: USB3.0 External HDD [ 355.963324] usb 1-1.1: Manufacturer: GODO [ 355.963328] usb 1-1.1: SerialNumber: 201401000045 [ 359.475351] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=41587 LEN=301 [ 360.497012] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=41587 LEN=301 [ 361.473097] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=41587 LEN=301 [ 362.472711] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=41587 LEN=301 [ 389.282544] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 389.286823] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 389.286918] radeon 0000:01:00.0: WB enabled [ 389.286920] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 389.
S2K,PNP0f13
S2M] at 0x60,0x64 irq 1,12 [ 0.878497] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.878510] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.878853] mousedev: PS/2 mouse device common for all mice [ 0.879595] rtc_cmos 00:01: RTC can wake from S4 [ 0.879811] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 0.879853] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs [ 0.879893] Intel P-state driver initializing. [ 0.880161] ledtrig-cpu: registered to indicate activity on CPUs [ 0.880528] Key type dns_resolver registered [ 0.880535] mpls_gso: MPLS GSO support [ 0.881009] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x29 [ 0.881030] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x29 [ 0.881054] microcode: CPU2 sig=0x206a7, pf=0x10, revision=0x29 [ 0.881077] microcode: CPU3 sig=0x206a7, pf=0x10, revision=0x29 [ 0.881178] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba [ 0.881561] registered taskstats version 1 [ 0.881617] zswap: loaded using pool lzo/zbud [ 0.882753] Btrfs loaded [ 0.883711] Magic number: 1:185:828 [ 0.883888] rtc_cmos 00:01: setting system clock to 2017-05-06 09:50:11 UTC (1494064211) [ 0.884027] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found [ 0.884250] PM: Checking hibernation image partition UUID=38d495d0-a8e5-4197-8d39-78959791f3a4 [ 0.893404] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 [ 1.171772] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.173764] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.178003] ata1.00: ATA-9: ST500LM012 HN-M500MBB, 2AR10002, max UDMA/133 [ 1.178013] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 1.184248] ata1.00: configured for UDMA/133 [ 1.184994] scsi 0:0:0:0: Direct-Access ATA ST500LM012 HN-M5 0002 PQ: 0 ANSI: 5 [ 1.185602] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB) [ 1.185611] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 1.185954] sd 0:0:0:0: [sda] Write Protect is off [ 1.185965] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.186141] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.186170] ata5.00: ATAPI: hp DVD-RAM UJ8B1, H.03, max UDMA/100 [ 1.198810] ata5.00: configured for UDMA/100 [ 1.211591] scsi 4:0:0:0: CD-ROM hp DVD-RAM UJ8B1 H.03 PQ: 0 ANSI: 5 [ 1.309145] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 > sda4 [ 1.311403] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.311429] PM: Hibernation image not present or could not be loaded. [ 1.313706] Freeing unused kernel memory: 1332K (ffffffff81d31000 - ffffffff81e7e000) [ 1.313711] Write protecting the kernel read-only data: 12288k [ 1.314746] Freeing unused kernel memory: 1224K (ffff8800016ce000 - ffff880001800000) [ 1.319028] Freeing unused kernel memory: 564K (ffff880001b73000 - ffff880001c00000) [ 1.443753] dracut: dracut-038 [ 1.716184] random: systemd-udevd: uninitialized urandom read (16 bytes read, 24 bits of entropy available) [ 1.739649] tsc: Refined TSC clocksource calibration: 2494.338 MHz [ 1.739664] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f454f0625, max_idle_ns: 440795228661 ns [ 1.822744] [drm] Initialized drm 1.1.0 20060810 [ 1.853413] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2 [ 1.853803] ACPI: Lid Switch [LID0] [ 1.854346] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3 [ 1.854363] ACPI: Power Button [PWRB] [ 1.855765] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4 [ 1.855783] ACPI: Power Button [PWRF] [ 2.096226] [drm] Memory usable by graphics device = 2048M [ 2.096240] checking generic (b0000000 1ff0000) vs hw (b0000000 10000000) [ 2.096246] fb: switching to inteldrmfb from VESA VGA [ 2.096326] Console: switching to colour dummy device 80x25 [ 2.096566] [drm] Replacing VGA console driver [ 2.102897] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.102905] [drm] Driver supports precise vblank timestamp query. [ 2.104137] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem [ 2.111480] [drm] radeon kernel modesetting enabled. [ 2.111510] vga_switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle [ 2.116620] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de> [ 2.116630] AMD IOMMUv2 functionality not available on this system [ 2.129088] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) [ 2.132414] acpi device:1a: registered as cooling_device0 [ 2.132581] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:16/LNXVIDEO:00/input/input5 [ 2.134732] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 2.137230] CRAT table not found [ 2.137240] Finished initializing topology ret=0 [ 2.137818] acpi device:1f: registered as cooling_device1 [ 2.137990] kfd kfd: Initialized module [ 2.138143] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input6 [ 2.138226] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0 [ 2.138642] radeon 0000:01:00.0: enabling device (0000 -> 0003) [ 2.139114] [drm] initializing kernel modesetting (CAICOS 0x1002:0x6760 0x103C:0x166C). [ 2.139141] [drm] register mmio base: 0xC2600000 [ 2.139144] [drm] register mmio size: 131072 [ 2.139149] vga_switcheroo: enabled [ 2.139373] ATPX version 1, functions 0x00000001 [ 2.141463] fbcon: inteldrmfb (fb0) is primary device [ 2.233075] ATOM BIOS: HP [ 2.233601] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used) [ 2.233605] radeon 0000:01:00.0: GTT: 1024M 0x0000000040000000 - 0x000000007FFFFFFF [ 2.233607] [drm] Detected VRAM RAM=1024M, BAR=256M [ 2.233609] [drm] RAM width 64bits DDR [ 2.233782] [TTM] Zone kernel: Available graphics memory: 1997384 kiB [ 2.233784] [TTM] Initializing pool allocator [ 2.233795] [TTM] Initializing DMA pool allocator [ 2.233833] [drm] radeon: 1024M of VRAM memory ready [ 2.233835] [drm] radeon: 1024M of GTT memory ready. [ 2.233865] [drm] Loading CAICOS Microcode [ 2.234078] [drm] Internal thermal controller without fan control [ 2.240056] [drm] radeon: dpm initialized [ 2.240251] [drm] GART: num cpu pages 262144, num gpu pages 262144 [ 2.242108] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 2.246151] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 2.246318] radeon 0000:01:00.0: WB enabled [ 2.246324] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 2.246328] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 2.247888] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 2.247891] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013). [ 2.247892] [drm] Driver supports precise vblank timestamp query. [ 2.247895] radeon 0000:01:00.0: radeon: MSI limited to 32-bit [ 2.247970] radeon 0000:01:00.0: radeon: using MSI. [ 2.248045] [drm] radeon: irq initialized. [ 2.265366] [drm] ring test on 0 succeeded in 2 usecs [ 2.265381] [drm] ring test on 3 succeeded in 8 usecs [ 2.442906] [drm] ring test on 5 succeeded in 2 usecs [ 2.442916] [drm] UVD initialized successfully. [ 2.443511] [drm] ib test on ring 0 succeeded in 0 usecs [ 2.443625] [drm] ib test on ring 3 succeeded in 0 usecs [ 2.739985] clocksource: Switched to clocksource tsc [ 2.864375] Console: switching to colour frame buffer device 200x56 [ 2.874273] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device [ 3.095776] [drm] ib test on ring 5 succeeded [ 3.096940] [drm] Radeon Display Connectors [ 3.096945] [drm] Connector 0: [ 3.096948] [drm] VGA-2 [ 3.096952] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [ 3.096955] [drm] Encoders: [ 3.096958] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 3.138934] radeon 0000:01:00.0: No connectors reported connected with modes [ 3.138941] [drm] Cannot find any crtc or sizes - going 1024x768 [ 3.141107] [drm] fb mappable at 0xA0475000 [ 3.141110] [drm] vram apper at 0xA0000000 [ 3.141113] [drm] size 3145728 [ 3.141116] [drm] fb depth is 24 [ 3.141119] [drm] pitch is 4096 [ 3.141311] radeon 0000:01:00.0: fb1: radeondrmfb frame buffer device [ 3.141457] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 1 [ 3.147331] dracut: Starting plymouth daemon [ 6.598839] rtsx_pci 0000:04:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 27 [ 6.625583] sr 4:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 6.625595] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 6.626159] sr 4:0:0:0: Attached scsi CD-ROM sr0 [ 6.638968] ACPI: bus type USB registered [ 6.639073] usbcore: registered new interface driver usbfs [ 6.639118] usbcore: registered new interface driver hub [ 6.639223] usbcore: registered new device driver usb [ 6.660411] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 6.662768] ehci-pci: EHCI PCI platform driver [ 6.663163] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 6.663188] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 6.663221] ehci-pci 0000:00:1a.0: debug port 2 [ 6.667162] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported [ 6.667222] ehci-pci 0000:00:1a.0: irq 16, io mem 0xc3609000 [ 6.672327] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 6.672493] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.672504] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.672512] usb usb1: Product: EHCI Host Controller [ 6.672520] usb usb1: Manufacturer: Linux 4.4.59-desktop-1.mga5 ehci_hcd [ 6.672528] usb usb1: SerialNumber: 0000:00:1a.0 [ 6.672991] hub 1-0:1.0: USB hub found [ 6.673009] hub 1-0:1.0: 2 ports detected [ 6.673690] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 6.673715] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 6.673747] ehci-pci 0000:00:1d.0: debug port 2 [ 6.677685] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported [ 6.677733] ehci-pci 0000:00:1d.0: irq 21, io mem 0xc3608000 [ 6.683334] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 6.683512] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 6.683522] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 6.683531] usb usb2: Product: EHCI Host Controller [ 6.683539] usb usb2: Manufacturer: Linux 4.4.59-desktop-1.mga5 ehci_hcd [ 6.683546] usb usb2: SerialNumber: 0000:00:1d.0 [ 6.684356] hub 2-0:1.0: USB hub found [ 6.684388] hub 2-0:1.0: 2 ports detected [ 6.941573] random: nonblocking pool is initialized [ 6.974316] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 6.986313] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 7.088636] usb 1-1: New USB device found, idVendor=8087, idProduct=0024 [ 7.088645] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.089111] hub 1-1:1.0: USB hub found [ 7.089251] hub 1-1:1.0: 6 ports detected [ 7.100629] usb 2-1: New USB device found, idVendor=8087, idProduct=0024 [ 7.100638] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 7.101133] hub 2-1:1.0: USB hub found [ 7.101256] hub 2-1:1.0: 6 ports detected [ 7.375290] usb 2-1.1: new full-speed USB device number 3 using ehci-pci [ 7.460597] usb 2-1.1: not running at top speed; connect to a high speed hub [ 7.461099] usb 2-1.1: New USB device found, idVendor=1a40, idProduct=0101 [ 7.461106] usb 2-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 7.461111] usb 2-1.1: Product: USB 2.0 Hub [Safe] [ 7.461571] hub 2-1.1:1.0: USB hub found [ 7.461729] hub 2-1.1:1.0: 4 ports detected [ 7.535274] usb 2-1.5: new high-speed USB device number 4 using ehci-pci [ 7.665969] usb 2-1.5: New USB device found, idVendor=05c8, idProduct=021e [ 7.665978] usb 2-1.5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 7.665984] usb 2-1.5: Product: HP Webcam-101 [ 7.665989] usb 2-1.5: Manufacturer: HP Webcam-101 [ 7.665994] usb 2-1.5: SerialNumber: HP Webcam-101 [ 7.735274] usb 2-1.1.2: new full-speed USB device number 5 using ehci-pci [ 7.821954] usb 2-1.1.2: New USB device found, idVendor=062a, idProduct=4102 [ 7.821965] usb 2-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 7.821970] usb 2-1.1.2: Product: 2.4G Wireless Mouse [ 7.821975] usb 2-1.1.2: Manufacturer: MOSART Semi. [ 7.839638] hidraw: raw HID events driver (C) Jiri Kosina [ 7.850574] usbcore: registered new interface driver usbhid [ 7.850583] usbhid: USB HID core driver [ 7.852516] input: MOSART Semi. 2.4G Wireless Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.2/2-1.1.2:1.0/0003:062A:4102.0001/input/input7 [ 7.852936] hid-generic 0003:062A:4102.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [MOSART Semi. 2.4G Wireless Mouse] on usb-0000:00:1d.0-1.1.2/input0 [ 8.066403] PM: Marking nosave pages: [mem 0x00000000-0x00000fff] [ 8.066412] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff] [ 8.066420] PM: Marking nosave pages: [mem 0x9ce3f000-0x9cffefff] [ 8.066443] PM: Marking nosave pages: [mem 0x9d000000-0xffffffff] [ 8.069476] PM: Basic memory bitmaps created [ 8.082948] PM: Basic memory bitmaps freed [ 8.082966] video LNXVIDEO:00: Restoring backlight state [ 8.084155] video LNXVIDEO:01: Restoring backlight state [ 8.090959] PM: Starting manual resume from disk [ 8.090970] PM: Hibernation image partition 8:7 present [ 8.090974] PM: Looking for hibernation image. [ 8.108659] PM: Image not found (code -22) [ 8.108668] PM: Hibernation image not present or could not be loaded. [ 8.173016] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 8.469133] dracut: Checking ext4: /dev/disk/by-uuid/33421747-4cff-42b7-878f-59d2e4aa1c0d [ 8.469645] dracut: issuing e2fsck -a /dev/disk/by-uuid/33421747-4cff-42b7-878f-59d2e4aa1c0d [ 8.534513] dracut: /dev/disk/by-uuid/33421747-4cff-42b7-878f-59d2e4aa1c0d: clean, 260884/1957888 files, 3821700/7830852 blocks [ 8.538715] dracut: Mounting /dev/disk/by-uuid/33421747-4cff-42b7-878f-59d2e4aa1c0d with -o defaults [ 8.597615] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) [ 9.024042] dracut: Mounted root filesystem /dev/sda6 [ 9.270066] dracut: Switching root [ 9.304565] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 9.763242] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time. [ 10.200897] NET: Registered protocol family 10 [ 12.891673] EXT4-fs (sda6): re-mounted. Opts: (null) [ 13.212226] RPC: Registered named UNIX socket transport module. [ 13.212235] RPC: Registered udp transport module. [ 13.212238] RPC: Registered tcp transport module. [ 13.212241] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 15.797589] Non-volatile memory driver v1.3 [ 17.472844] ACPI: Battery Slot [BAT0] (battery absent) [ 17.517554] ACPI: AC Adapter [ACAD] (on-line) [ 17.785937] [Firmware Bug]: Invalid critical threshold (0) [ 17.788030] thermal LNXTHERM:00: registered as thermal_zone0 [ 17.788037] ACPI: Thermal Zone [TZ01] (54 C) [ 17.941755] wmi: Mapper loaded [ 18.020638] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254) [ 18.020656] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 18.020665] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254) [ 18.020676] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.WMID.GPIO) (20150930/utaddress-254) [ 18.020687] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.GPIO) (20150930/utaddress-254) [ 18.020697] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254) [ 18.020707] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO) (20150930/utaddress-254) [ 18.020716] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 18.020720] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254) [ 18.020729] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.WMID.GPIO) (20150930/utaddress-254) [ 18.020737] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.GPIO) (20150930/utaddress-254) [ 18.020746] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254) [ 18.020756] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO) (20150930/utaddress-254) [ 18.020764] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 18.020768] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254) [ 18.020776] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.WMID.GPIO) (20150930/utaddress-254) [ 18.020785] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.GPIO) (20150930/utaddress-254) [ 18.020794] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.PEG0.PEGP.GPIO) (20150930/utaddress-254) [ 18.020803] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000055F (\_SB_.PCI0.LPCB.GPIO) (20150930/utaddress-254) [ 18.020811] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 18.020814] lpc_ich: Resource conflict(s) found affecting gpio_ich [ 18.084180] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 18.103769] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 18.448514] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED [ 18.679928] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 18.679955] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control [ 18.680761] r8169 0000:03:00.0 eth0: RTL8105e at 0xffffc900007ac000, 80:c1:6e:48:d2:36, XID 00a00000 IRQ 29 [ 19.300977] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4828] [ 19.381424] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1678, fw id: 706628 [ 19.431716] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8 [ 19.524013] input: HP WMI hotkeys as /devices/virtual/input/input9 [ 19.622116] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected [ 19.626378] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5390 detected [ 19.628990] iTCO_vendor_support: vendor-support=0 [ 19.729092] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 19.729127] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460) [ 19.729215] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1) [ 19.835700] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker [ 19.835704] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 19.835705] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0) [ 19.835707] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0 [ 19.835708] snd_hda_codec_idt hdaudioC0D0: inputs: [ 19.835710] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11 [ 19.835711] snd_hda_codec_idt hdaudioC0D0: Mic=0xc [ 19.938274] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 20.061444] r8169 0000:03:00.0 eno1: renamed from eth0 [ 20.141132] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 20.141742] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 20.141787] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 20.141831] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 20.147564] rt2800pci 0000:02:00.0 wlp2s0: renamed from wlan0 [ 21.978333] AVX version of gcm_enc/dec engaged. [ 21.978336] AES CTR mode by8 optimization enabled [ 23.369602] cfg80211: World regulatory domain updated: [ 23.369607] cfg80211: DFS Master region: unset [ 23.369609] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 23.369612] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 23.369615] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 23.369617] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 23.369620] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 23.369623] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 23.369625] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 23.369627] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 23.369629] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 23.552005] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel. [ 23.552010] Disabling lock debugging due to kernel taint [ 23.569231] <6>[fglrx] Maximum main memory to use for locked dma buffers: 3740 MBytes. [ 23.569361] <6>[fglrx] vendor: 1002 device: 6760 revision: 0 count: 1 [ 23.569537] <6>[fglrx] ioport: bar 4, base 0x4000, size: 0x100 [ 23.569606] <6>[fglrx] Kernel PAT support is enabled [ 23.569618] <6>[fglrx] module loaded - fglrx 15.30.3 [Dec 17 2015] with 1 minors [ 23.582995] cfg80211: Regulatory domain changed to country: US [ 23.582998] cfg80211: DFS Master region: FCC [ 23.582999] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 23.583001] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 3000 mBm), (N/A) [ 23.583003] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A) [ 23.583004] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s) [ 23.583006] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2300 mBm), (0 s) [ 23.583007] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A) [ 23.583008] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 24.907132] media: Linux media interface: v0.10 [ 24.990999] Linux video capture interface: v2.00 [ 25.473493] uvcvideo: Found UVC 1.00 device HP Webcam-101 (05c8:021e) [ 25.487855] input: HP Webcam-101 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input14 [ 25.487924] usbcore: registered new interface driver uvcvideo [ 25.487926] USB Video Class driver (1.1.1) [ 25.820509] systemd-journald[511]: Received request to flush runtime journal from PID 1 [ 26.362535] fuse init (API version 7.23) [ 26.592271] intel_rapl: Found RAPL domain package [ 26.592274] intel_rapl: Found RAPL domain core [ 26.592275] intel_rapl: Found RAPL domain uncore [ 26.592279] intel_rapl: RAPL package 0 domain package locked by BIOS [ 27.033642] Adding 4086764k swap on /dev/sda7. Priority:-1 extents:1 across:4086764k FS [ 27.949854] ata1.00: configured for UDMA/133 [ 27.949867] ata1: EH complete [ 28.694515] EXT4-fs (sda6): re-mounted. Opts: commit=0 [ 29.480276] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) [ 30.683813] ata1.00: configured for UDMA/133 [ 30.683819] ata1: EH complete [ 30.697764] EXT4-fs (sda6): re-mounted. Opts: commit=0 [ 30.719488] EXT4-fs (sda8): re-mounted. Opts: commit=0 [ 30.832187] device-mapper: uevent: version 1.0.3 [ 30.832268] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 42.463996] r8169 0000:03:00.0 eno1: link down [ 42.464057] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 42.482437] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 42.486698] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 42.486793] radeon 0000:01:00.0: WB enabled [ 42.486795] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 42.486797] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 42.488344] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 42.504737] [drm] ring test on 0 succeeded in 2 usecs [ 42.504754] [drm] ring test on 3 succeeded in 9 usecs [ 42.514439] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2860.bin' [ 42.545466] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.40 [ 42.634620] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 42.682109] [drm] ring test on 5 succeeded in 2 usecs [ 42.682119] [drm] UVD initialized successfully. [ 42.682209] [drm] ib test on ring 0 succeeded in 0 usecs [ 42.682293] [drm] ib test on ring 3 succeeded in 0 usecs [ 42.860784] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready [ 43.003336] NET: Registered protocol family 17 [ 43.334022] [drm] ib test on ring 5 succeeded [ 43.587231] wlp2s0: authenticate with 54:64:d9:4c:67:d6 [ 43.595596] wlp2s0: send auth to 54:64:d9:4c:67:d6 (try 1/3) [ 43.618646] wlp2s0: authenticated [ 43.618982] wlp2s0: associate with 54:64:d9:4c:67:d6 (try 1/3) [ 43.625799] wlp2s0: RX AssocResp from 54:64:d9:4c:67:d6 (capab=0x1411 status=0 aid=1) [ 43.625931] wlp2s0: associated [ 43.625967] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready [ 43.711313] vboxdrv: Found 4 processor cores [ 43.727436] vboxdrv: TSC mode is Invariant, tentative frequency 2494312479 Hz [ 43.727439] vboxdrv: Successfully loaded version 5.1.18 (interface 0x00280000) [ 43.743388] VBoxNetFlt: Successfully started. [ 43.758765] VBoxNetAdp: Successfully started. [ 56.148961] ip_tables: (C) 2000-2006 Netfilter Core Team [ 58.350440] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 65.704302] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 65.899975] Netfilter messages via NETLINK v0.30. [ 66.049112] ctnetlink v0.93: registering with nfnetlink. [ 69.549022] Adjusting tsc more than 11% (7774752 vs 7465993) [ 71.013588] xt_CT: No such helper "irc" [ 71.017063] xt_CT: No such helper "irc-0" [ 71.021851] xt_CT: No such helper "netbios-ns" [ 71.025270] xt_CT: No such helper "pptp" [ 71.035294] xt_CT: No such helper "snmp" [ 71.189169] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this. [ 72.247137] xt_addrtype: ipv6 does not support BROADCAST matching [ 73.250141] ip_set: protocol 6 [ 73.674871] netfilter PSD loaded - (c) astaro AG [ 73.713479] IFWLOG: register target [ 77.762586] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 77.766840] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 77.766935] radeon 0000:01:00.0: WB enabled [ 77.766938] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 77.766939] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 77.768493] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 77.785085] [drm] ring test on 0 succeeded in 2 usecs [ 77.785097] [drm] ring test on 3 succeeded in 8 usecs [ 77.962425] [drm] ring test on 5 succeeded in 2 usecs [ 77.962434] [drm] UVD initialized successfully. [ 77.962518] [drm] ib test on ring 0 succeeded in 0 usecs [ 77.962595] [drm] ib test on ring 3 succeeded in 0 usecs [ 78.614187] [drm] ib test on ring 5 succeeded [ 89.932897] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 89.937175] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 89.937270] radeon 0000:01:00.0: WB enabled [ 89.937272] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 89.937274] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 89.938851] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 89.955242] [drm] ring test on 0 succeeded in 2 usecs [ 89.955256] [drm] ring test on 3 succeeded in 4 usecs [ 90.132608] [drm] ring test on 5 succeeded in 2 usecs [ 90.132617] [drm] UVD initialized successfully. [ 90.132701] [drm] ib test on ring 0 succeeded in 0 usecs [ 90.132779] [drm] ib test on ring 3 succeeded in 0 usecs [ 90.784466] [drm] ib test on ring 5 succeeded [ 105.752709] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 105.756945] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 105.757040] radeon 0000:01:00.0: WB enabled [ 105.757043] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 105.757045] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 105.758592] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 105.775173] [drm] ring test on 0 succeeded in 2 usecs [ 105.775187] [drm] ring test on 3 succeeded in 8 usecs [ 105.952523] [drm] ring test on 5 succeeded in 2 usecs [ 105.952533] [drm] UVD initialized successfully. [ 105.952620] [drm] ib test on ring 0 succeeded in 0 usecs [ 105.952697] [drm] ib test on ring 3 succeeded in 0 usecs [ 106.604154] [drm] ib test on ring 5 succeeded [ 116.927112] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 116.931392] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 116.931487] radeon 0000:01:00.0: WB enabled [ 116.931490] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 116.931491] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 116.933043] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 116.949602] [drm] ring test on 0 succeeded in 2 usecs [ 116.949618] [drm] ring test on 3 succeeded in 9 usecs [ 117.126963] [drm] ring test on 5 succeeded in 2 usecs [ 117.126975] [drm] UVD initialized successfully. [ 117.127066] [drm] ib test on ring 0 succeeded in 0 usecs [ 117.127143] [drm] ib test on ring 3 succeeded in 0 usecs [ 117.780378] [drm] ib test on ring 5 succeeded [ 119.490976] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=56037 LEN=301 [ 120.491038] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=56037 LEN=301 [ 121.491424] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=56037 LEN=301 [ 122.493444] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=56037 LEN=301 [ 126.891207] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=34585 LEN=301 [ 127.889625] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=34585 LEN=301 [ 128.886298] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=34585 LEN=301 [ 129.888260] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=34585 LEN=301 [ 175.733318] usb 1-1.1: new high-speed USB device number 3 using ehci-pci [ 175.880059] usb 1-1.1: New USB device found, idVendor=174c, idProduct=55aa [ 175.880070] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 175.880075] usb 1-1.1: Product: USB3.0 External HDD [ 175.880080] usb 1-1.1: Manufacturer: GODO [ 175.880084] usb 1-1.1: SerialNumber: 201401000045 [ 175.933866] usbcore: registered new interface driver usb-storage [ 180.562447] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 180.566669] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 180.566763] radeon 0000:01:00.0: WB enabled [ 180.566766] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 180.566767] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 180.568332] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 180.584773] [drm] ring test on 0 succeeded in 2 usecs [ 180.584786] [drm] ring test on 3 succeeded in 8 usecs [ 180.762122] [drm] ring test on 5 succeeded in 2 usecs [ 180.762132] [drm] UVD initialized successfully. [ 180.762219] [drm] ib test on ring 0 succeeded in 0 usecs [ 180.762296] [drm] ib test on ring 3 succeeded in 0 usecs [ 181.414035] [drm] ib test on ring 5 succeeded [ 206.703542] usb 1-1.1: USB disconnect, device number 3 [ 223.159725] usb 1-1.1: new high-speed USB device number 4 using ehci-pci [ 223.306672] usb 1-1.1: New USB device found, idVendor=174c, idProduct=55aa [ 223.306683] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 223.306689] usb 1-1.1: Product: USB3.0 External HDD [ 223.306694] usb 1-1.1: Manufacturer: GODO [ 223.306698] usb 1-1.1: SerialNumber: 201401000045 [ 239.481935] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=59336 LEN=301 [ 240.483321] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=59336 LEN=301 [ 241.488035] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=59336 LEN=301 [ 242.481850] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=59336 LEN=301 [ 286.445192] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 286.449443] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 286.449538] radeon 0000:01:00.0: WB enabled [ 286.449540] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 286.449541] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880159182c0c [ 286.451117] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0xffffc90001432118 [ 286.467705] [drm] ring test on 0 succeeded in 2 usecs [ 286.467718] [drm] ring test on 3 succeeded in 8 usecs [ 286.645048] [drm] ring test on 5 succeeded in 2 usecs [ 286.645057] [drm] UVD initialized successfully. [ 286.645141] [drm] ib test on ring 0 succeeded in 0 usecs [ 286.645219] [drm] ib test on ring 3 succeeded in 0 usecs [ 287.296784] [drm] ib test on ring 5 succeeded [ 342.349767] usb 1-1.1: USB disconnect, device number 4 [ 355.816594] usb 1-1.1: new high-speed USB device number 5 using ehci-pci [ 355.963303] usb 1-1.1: New USB device found, idVendor=174c, idProduct=55aa [ 355.963314] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [ 355.963320] usb 1-1.1: Product: USB3.0 External HDD [ 355.963324] usb 1-1.1: Manufacturer: GODO [ 355.963328] usb 1-1.1: SerialNumber: 201401000045 [ 359.475351] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=41587 LEN=301 [ 360.497012] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=41587 LEN=301 [ 361.473097] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=41587 LEN=301 [ 362.472711] Shorewall:net-fw
ROP:IN=wlp2s0 OUT= MAC=7c:e9:d3:75:82:07:54:64:d9:e0:a3:1e:08:00 SRC=192.168.0.2 DST=192.168.0.11 LEN=321 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=1900 DPT=41587 LEN=301 [ 389.282544] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0 [ 389.286823] [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000). [ 389.286918] radeon 0000:01:00.0: WB enabled [ 389.286920] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880159182c00 [ 389.
Linuxmint 24.02 Xia - Mageia 9 xfce et plasma sur ssd sur HP Pavilion g7
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
loutch Membre non connecté
-
- Voir le profil du membre loutch
- Inscrit le : 07/07/2010
- Groupes :
@+
Linuxmint 24.02 Xia - Mageia 9 xfce et plasma sur ssd sur HP Pavilion g7
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
[ 355.816594] usb 1-1.1: new high-speed USB device number 5 using ehci-pci
[ 355.963303] usb 1-1.1: New USB device found, idVendor=174c, idProduct=55aa
[ 355.963314] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 355.963320] usb 1-1.1: Product: USB3.0 External HDD
[ 355.963324] usb 1-1.1: Manufacturer: GODO
[ 355.963328] usb 1-1.1: SerialNumber: 201401000045
[ 355.963303] usb 1-1.1: New USB device found, idVendor=174c, idProduct=55aa
[ 355.963314] usb 1-1.1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 355.963320] usb 1-1.1: Product: USB3.0 External HDD
[ 355.963324] usb 1-1.1: Manufacturer: GODO
[ 355.963328] usb 1-1.1: SerialNumber: 201401000045
et c'est tout.
C'est étonnant, normalement il devrait lui attribuer un nom /dev/sdb et reconnaitre les partitions.
Est-ce la même chose sur tous les ports USB ?
Yves
loutch Membre non connecté
-
- Voir le profil du membre loutch
- Inscrit le : 07/07/2010
- Groupes :
pareil , j'ai rien.
Linuxmint 24.02 Xia - Mageia 9 xfce et plasma sur ssd sur HP Pavilion g7
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
loutch Membre non connecté
-
- Voir le profil du membre loutch
- Inscrit le : 07/07/2010
- Groupes :
Pour etre sure (pas de problème avec mes usb j'ai branché mon ssd de sauvegarde qui est reconnu et monté automatiquement.
Code TEXT :
[loutch@localhost ~]$ lsusb Bus 002 Device 004: ID 05c8:021e Cheng Uei Precision Industry Co., Ltd (Foxlink) Bus 002 Device 005: ID 062a:4102 Creative Labs Bus 002 Device 003: ID 1a40:0101 Terminus Technology Inc. Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 004: ID 174c:5136 ASMedia Technology Inc. ASM1053 SATA 6Gb/s bridge Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub [loutch@localhost ~]$ df Sys. de fichiers Taille Utilisé Dispo Uti% Monté sur devtmpfs 1,9G 0 1,9G 0% /dev tmpfs 2,0G 940K 2,0G 1% /dev/shm tmpfs 2,0G 1,1M 2,0G 1% /run /dev/sda6 30G 14G 14G 51% / tmpfs 2,0G 0 2,0G 0% /sys/fs/cgroup tmpfs 2,0G 8,0K 2,0G 1% /tmp /dev/sda2 344G 148G 196G 43% /mnt/windows /dev/sda8 25G 8,5G 16G 36% /home tmpfs 391M 12K 391M 1% /run/user/1001 /dev/sdb2 112G 47G 66G 42% /run/media/loutch/Romu
et là j'ai bien un dossier /media dans /run , si on prend la dernière ligne le ssd est bien reconnu en /dev/sdb2

@+
Édité par loutch Le 06/05/2017 à 14h13
Linuxmint 24.02 Xia - Mageia 9 xfce et plasma sur ssd sur HP Pavilion g7
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
Je me demande si c'est en lien avec l'USB3.
Yves
thierryR Membre non connecté
-
- Voir le profil du membre thierryR
- Inscrit le : 02/02/2010
- Site internet
débusqueur de bugs et chercheur en améliorations
Amicalement vôtre.
Kernel: 4.4.92-desktop-1.mga5 x86_64 (64 bit) Desktop: KDE 4.14.35 Distro: Mageia 5 thornicroft
Machine: Mobo: ASUSTeK model: X751SA v: 1.0 Bios: American Megatrends v: X751SA.403
CPU: Quad core Intel Pentium N3710 (-MCP-) cache: 1024 KB Graphics: Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
Amicalement vôtre.Kernel: 4.4.92-desktop-1.mga5 x86_64 (64 bit) Desktop: KDE 4.14.35 Distro: Mageia 5 thornicroft
Machine: Mobo: ASUSTeK model: X751SA v: 1.0 Bios: American Megatrends v: X751SA.403
CPU: Quad core Intel Pentium N3710 (-MCP-) cache: 1024 KB Graphics: Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
loutch Membre non connecté
-
- Voir le profil du membre loutch
- Inscrit le : 07/07/2010
- Groupes :
thierryR:
Ton DD de 3 Go est formaté en GPT ?
j'ai pas de DD de 3 Go
@+
Linuxmint 24.02 Xia - Mageia 9 xfce et plasma sur ssd sur HP Pavilion g7
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
thierryR Membre non connecté
-
- Voir le profil du membre thierryR
- Inscrit le : 02/02/2010
- Site internet
débusqueur de bugs et chercheur en améliorations
Amicalement vôtre.
Kernel: 4.4.92-desktop-1.mga5 x86_64 (64 bit) Desktop: KDE 4.14.35 Distro: Mageia 5 thornicroft
Machine: Mobo: ASUSTeK model: X751SA v: 1.0 Bios: American Megatrends v: X751SA.403
CPU: Quad core Intel Pentium N3710 (-MCP-) cache: 1024 KB Graphics: Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
Amicalement vôtre.Kernel: 4.4.92-desktop-1.mga5 x86_64 (64 bit) Desktop: KDE 4.14.35 Distro: Mageia 5 thornicroft
Machine: Mobo: ASUSTeK model: X751SA v: 1.0 Bios: American Megatrends v: X751SA.403
CPU: Quad core Intel Pentium N3710 (-MCP-) cache: 1024 KB Graphics: Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
loutch Membre non connecté
-
- Voir le profil du membre loutch
- Inscrit le : 07/07/2010
- Groupes :

@+
Édité par loutch Le 08/05/2017 à 09h02
Linuxmint 24.02 Xia - Mageia 9 xfce et plasma sur ssd sur HP Pavilion g7
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
Xubuntu 18.04 LTS et 24.04 en xfce sur ASUS Rog STRIX
thierryR Membre non connecté
-
- Voir le profil du membre thierryR
- Inscrit le : 02/02/2010
- Site internet
débusqueur de bugs et chercheur en améliorations
Amicalement vôtre.
Kernel: 4.4.92-desktop-1.mga5 x86_64 (64 bit) Desktop: KDE 4.14.35 Distro: Mageia 5 thornicroft
Machine: Mobo: ASUSTeK model: X751SA v: 1.0 Bios: American Megatrends v: X751SA.403
CPU: Quad core Intel Pentium N3710 (-MCP-) cache: 1024 KB Graphics: Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
Amicalement vôtre.Kernel: 4.4.92-desktop-1.mga5 x86_64 (64 bit) Desktop: KDE 4.14.35 Distro: Mageia 5 thornicroft
Machine: Mobo: ASUSTeK model: X751SA v: 1.0 Bios: American Megatrends v: X751SA.403
CPU: Quad core Intel Pentium N3710 (-MCP-) cache: 1024 KB Graphics: Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie