Forum

Bonjour,

Je suis fraichement sous Mageia 3 et je peine à installer mon stick usb tnt.
Quand je tape lsusb il est bien présent :
lsusb
Bus 001 Device 002: ID 046d:c040 Logitech, Inc. Corded Tilt-Wheel Mouse
Bus 002 Device 005: ID 1241:1603 Belkin Keyboard
Bus 003 Device 014: ID 15a4:9016 Afatech Technologies, Inc. AF9015 DVB-T USB2.0 stick
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

J'ai télécharger le firmware http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/4.95.0/ et je l'ai copié sous /usr/lib/firmware/

Je me suis rajouté dans le groupe vidéo.

Et quand je branche mon stick usb tnt il n'est pas reconnu ni avec w-scan ni kaffeine ni me tv....
Je fais un dmesg :
[ 6957.607021] usb 3-2: new high-speed USB device number 14 using ehci-pci
[ 6957.725712] usb 3-2: New USB device found, idVendor=15a4, idProduct=9016
[ 6957.725720] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6957.725724] usb 3-2: Product: AF9015
[ 6957.725728] usb 3-2: Manufacturer: Geniatech
[ 6957.725731] usb 3-2: SerialNumber: 010101010600001
[ 6957.730329] Geniatech AF9015: Fixing fullspeed to highspeed interval: 16 -> 8
[ 6957.730353] usb 3-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in cold state
[ 6957.730421] usb 3-2: dvb_usb_v2: downloading firmware from file 'dvb-usb-af9015.fw'
[ 6957.730721] input: Geniatech AF9015 as /devices/pci0000:00/0000:00:1d.7/usb3/3-2/3-2:1.1/input/input20
[ 6957.730910] hid-generic 0003:15A4:9016.0012: input,hidraw3: USB HID v1.01 Keyboard [Geniatech AF9015] on usb-0000:00:1d.7-2/input1
[ 6957.798985] usb 3-2: dvb_usb_v2: found a 'Afatech AF9015 reference design' in warm state
[ 6958.166595] usb 3-2: dvb_usb_v2: will pass the complete MPEG2 transport stream to the software demuxer
[ 6958.166675] DVB: registering new adapter (Afatech AF9015 reference design)
[ 6958.169509] i2c i2c-7: af9013: firmware version 4.95.0.0
[ 6958.172666] usb 3-2: DVB: registering adapter 0 frontend 0 (Afatech AF9013)...
[ 6958.174266] usb 3-2: dvb_usb_af9015: command failed=2
[ 6958.174274] i2c i2c-7: qt1010: i2c rd failed reg=29
[ 6958.174390] usb 3-2: dvb_usb_v2: 'Afatech AF9015 reference design' error while loading driver (-19)
[ 6958.174748] usb 3-2: dvb_usb_v2: 'Afatech AF9015 reference design' successfully deinitialized and disconnected

Si quelqu'un a une idée ....
Merci d'avance

Salut

D'aprés ce message , il semblerai que l'ajout du paquet firmware-nonfree est résolu le probléme .

Tu peux toujours commencer par ça :

http://www.mageialinux-online.org/wiki/firmwares-non-libres


@+