Forum

Reprise du message précédent

ace66130, tu as le même graveur que hamanotha ? Il y aurait il un lien avec ce bug http://www.mageialinux-online.org/forum/topic-10288+lecteur-graveur-pc-portable.php ?

Je sais pas si c moi qui buggue pas? Dans dolphin, en fin de liste des périphérique à gauche, je vois le nom du DVD mais dans /media/cdrom/, c'est vide ... Peut-être que c'est normal? On devrait quand même voir le contenu quelque part, non?

Ouais, c'est la même chose, le graveur fonctionnait sur la beta2 mais ne fonctionne plus depuis que je suis sur la RC1.

Résultat lshw :



et résultat dmesg :

<span class="formatter-hide">Caché:</span><div class="hide" onclick="bb_hide(this)"><div class="hide2">pci 0000:00:14.0: [10de:0269] type 0 class 0x000680

pci 0000:00:14.0: reg 10: [mem 0xfe02b000-0xfe02bfff]

pci 0000:00:14.0: reg 14: [io 0xc400-0xc407]

pci 0000:00:14.0: supports D1 D2

pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold

pci 0000:00:14.0: PME# disabled

pci 0000:00:18.0: [1022:1100] type 0 class 0x000600

pci 0000:00:18.1: [1022:1101] type 0 class 0x000600

pci 0000:00:18.2: [1022:1102] type 0 class 0x000600

pci 0000:00:18.3: [1022:1103] type 0 class 0x000600

PCI: peer root bus 00 res updated from pci conf

pci 0000:00:04.0: PCI bridge to [bus 01-01]

pci 0000:00:04.0: bridge window [io 0xa000-0xafff]

pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff]

pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]

pci 0000:02:05.0: [11c1:5811] type 0 class 0x000c00

pci 0000:02:05.0: reg 10: [mem 0xfdbff000-0xfdbfffff]

pci 0000:02:05.0: supports D1 D2

pci 0000:02:05.0: PME# supported from D0 D1 D2 D3hot

pci 0000:02:05.0: PME# disabled

pci 0000:00:10.0: PCI bridge to [bus 02-02] (subtractive decode)

pci 0000:00:10.0: bridge window [io 0xb000-0xbfff]

pci 0000:00:10.0: bridge window [mem 0xfdb00000-0xfdbfffff]

pci 0000:00:10.0: bridge window [mem 0xfde00000-0xfdefffff pref]

pci 0000:00:10.0: bridge window [io 0x0000-0xffff] (subtractive decode)

pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)

pci 0000:00:10.0: bridge window [mem 0x40000000-0xf3ffffff] (subtractive decode)

pci 0000:00:10.0: bridge window [mem 0xf4000000-0xffffffff] (subtractive decode)

pci_bus 0000:00: on NUMA node 0

ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]

ACPI: PCI Interrupt Routing Table [_SB_.PCI0.HUB0._PRT]

pci0000:00: Requesting ACPI _OSC control (0x1d)

ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)

ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)

ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)

ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.

ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)

ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)

ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.

ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.

ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.

ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.

ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.

ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.

ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0

ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.

ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.

ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.

ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0

ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.

ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.

ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0

ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.

ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.

ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.

ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.

ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.

ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0

ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0

vgaarb: device added: PCI:0000:00:05.0,decodes=io+mem,owns=io+mem,locks=none

vgaarb: loaded

PCI: Using ACPI for IRQ routing

PCI: pci_cache_line_size set to 64 bytes

reserve RAM buffer: 000000000009f800 - 000000000009ffff

reserve RAM buffer: 000000003bef0000 - 000000003bffffff

NetLabel: Initializing

NetLabel: domain hash size = 128

NetLabel: protocols = UNLABELED CIPSOv4

NetLabel: unlabeled traffic allowed by default

pnp: PnP ACPI init

ACPI: bus type pnp registered

pnp 00:00: [bus 00-02]

pnp 00:00: [io 0x0cf8-0x0cff]

pnp 00:00: [io 0x0000-0x03af window]

pnp 00:00: [io 0x03e0-0x0cf7 window]

pnp 00:00: [io 0x4c00-0x4c7f window]

pnp 00:00: [io 0x1000-0xffff window]

pnp 00:00: [io 0x03b0-0x03df window]

pnp 00:00: [mem 0x000a0000-0x000bffff window]

pnp 00:00: [mem 0x40000000-0xefffffff window]

pnp 00:00: [mem 0xf4000000-0xfe02ffff window]

pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)

pnp 00:01: [io 0x4000-0x407f]

pnp 00:01: [io 0x4080-0x40ff]

pnp 00:01: [io 0x4400-0x447f]

pnp 00:01: [io 0x4480-0x44ff]

pnp 00:01: [io 0x4800-0x487f]

pnp 00:01: [io 0x4880-0x48ff]

pnp 00:01: [mem 0x3c000000-0x3fffffff]

pnp 00:01: [io 0x2000-0x207f]

pnp 00:01: [io 0x2080-0x20ff]

system 00:01: [io 0x4000-0x407f] has been reserved

system 00:01: [io 0x4080-0x40ff] has been reserved

system 00:01: [io 0x4400-0x447f] has been reserved

system 00:01: [io 0x4480-0x44ff] has been reserved

system 00:01: [io 0x4800-0x487f] has been reserved

system 00:01: [io 0x4880-0x48ff] has been reserved

system 00:01: [io 0x2000-0x207f] has been reserved

system 00:01: [io 0x2080-0x20ff] has been reserved

system 00:01: [mem 0x3c000000-0x3fffffff] has been reserved

system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

pnp 00:02: [io 0x0010-0x001f]

pnp 00:02: [io 0x0022-0x003f]

pnp 00:02: [io 0x0044-0x005f]

pnp 00:02: [io 0x0062-0x0063]

pnp 00:02: [io 0x0065-0x006f]

pnp 00:02: [io 0x0074-0x007f]

pnp 00:02: [io 0x0091-0x0093]

pnp 00:02: [io 0x00a2-0x00bf]

pnp 00:02: [io 0x00e0-0x00ef]

pnp 00:02: [io 0x04d0-0x04d1]

pnp 00:02: [io 0x0290-0x029f]

system 00:02: [io 0x04d0-0x04d1] has been reserved

system 00:02: [io 0x0290-0x029f] has been reserved

system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)

pnp 00:03: [dma 4]

pnp 00:03: [io 0x0000-0x000f]

pnp 00:03: [io 0x0080-0x0090]

pnp 00:03: [io 0x0094-0x009f]

pnp 00:03: [io 0x00c0-0x00df]

pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)

pnp 00:04: [io 0x0070-0x0073]

pnp 00:04: [irq 8]

pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)

pnp 00:05: [io 0x0061]

pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)

pnp 00:06: [io 0x00f0-0x00ff]

pnp 00:06: [irq 13]

pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)

pnp 00:07: [io 0x0060]

pnp 00:07: [io 0x0064]

pnp 00:07: [irq 1]

pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)

pnp 00:08: [mem 0xf0000000-0xf3ffffff]

system 00:08: [mem 0xf0000000-0xf3ffffff] has been reserved

system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)

pnp 00:09: [mem 0x000f0000-0x000f3fff]

pnp 00:09: [mem 0x000f4000-0x000f7fff]

pnp 00:09: [mem 0x000f8000-0x000fbfff]

pnp 00:09: [mem 0x000fc000-0x000fffff]

pnp 00:09: [mem 0x3bef0000-0x3befffff]

pnp 00:09: [mem 0xffff0000-0xffffffff]

pnp 00:09: [mem 0x00000000-0x0009ffff]

pnp 00:09: [mem 0x00100000-0x3beeffff]

pnp 00:09: [mem 0x3bf00000-0x3fefffff]

pnp 00:09: [mem 0xfec00000-0xfec00fff]

pnp 00:09: [mem 0xfee00000-0xfeefffff]

pnp 00:09: [mem 0xfefff000-0xfeffffff]

pnp 00:09: [mem 0xfff80000-0xfff80fff]

pnp 00:09: [mem 0xfff90000-0xfffbffff]

pnp 00:09: [mem 0xfffed000-0xfffeffff]

system 00:09: [mem 0x000f0000-0x000f3fff] could not be reserved

system 00:09: [mem 0x000f4000-0x000f7fff] could not be reserved

system 00:09: [mem 0x000f8000-0x000fbfff] could not be reserved

system 00:09: [mem 0x000fc000-0x000fffff] could not be reserved

system 00:09: [mem 0x3bef0000-0x3befffff] could not be reserved

system 00:09: [mem 0xffff0000-0xffffffff] has been reserved

system 00:09: [mem 0x00000000-0x0009ffff] could not be reserved

system 00:09: [mem 0x00100000-0x3beeffff] could not be reserved

system 00:09: [mem 0x3bf00000-0x3fefffff] could not be reserved

system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved

system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved

system 00:09: [mem 0xfefff000-0xfeffffff] has been reserved

system 00:09: [mem 0xfff80000-0xfff80fff] has been reserved

system 00:09: [mem 0xfff90000-0xfffbffff] has been reserved

system 00:09: [mem 0xfffed000-0xfffeffff] has been reserved

system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)

pnp: PnP ACPI: found 10 devices

ACPI: ACPI bus type pnp unregistered

PnPBIOS: Disabled

Switching to clocksource acpi_pm

pci 0000:00:05.0: BAR 6: assigned [mem 0x40000000-0x4001ffff pref]

pci 0000:00:04.0: PCI bridge to [bus 01-01]

pci 0000:00:04.0: bridge window [io 0xa000-0xafff]

pci 0000:00:04.0: bridge window [mem 0xfdc00000-0xfdcfffff]

pci 0000:00:04.0: bridge window [mem 0xfdd00000-0xfddfffff 64bit pref]

pci 0000:00:10.0: PCI bridge to [bus 02-02]

pci 0000:00:10.0: bridge window [io 0xb000-0xbfff]

pci 0000:00:10.0: bridge window [mem 0xfdb00000-0xfdbfffff]

pci 0000:00:10.0: bridge window [mem 0xfde00000-0xfdefffff pref]

pci 0000:00:04.0: setting latency timer to 64

pci 0000:00:10.0: setting latency timer to 64

pci_bus 0000:00: resource 4 [io 0x0000-0xffff]

pci_bus 0000:00: resource 5 [mem 0x000a0000-0x000bffff]

pci_bus 0000:00: resource 6 [mem 0x40000000-0xf3ffffff]

pci_bus 0000:00: resource 7 [mem 0xf4000000-0xffffffff]

pci_bus 0000:01: resource 0 [io 0xa000-0xafff]

pci_bus 0000:01: resource 1 [mem 0xfdc00000-0xfdcfffff]

pci_bus 0000:01: resource 2 [mem 0xfdd00000-0xfddfffff 64bit pref]

pci_bus 0000:02: resource 0 [io 0xb000-0xbfff]

pci_bus 0000:02: resource 1 [mem 0xfdb00000-0xfdbfffff]

pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff pref]

pci_bus 0000:02: resource 4 [io 0x0000-0xffff]

pci_bus 0000:02: resource 5 [mem 0x000a0000-0x000bffff]

pci_bus 0000:02: resource 6 [mem 0x40000000-0xf3ffffff]

pci_bus 0000:02: resource 7 [mem 0xf4000000-0xffffffff]

NET: Registered protocol family 2

IP route cache hash table entries: 32768 (order: 5, 131072 bytes)

Switched to NOHz mode on CPU #0

TCP established hash table entries: 131072 (order: 8, 1048576 bytes)

TCP bind hash table entries: 65536 (order: 7, 524288 bytes)

TCP: Hash tables configured (established 131072 bind 65536)

TCP reno registered

UDP hash table entries: 512 (order: 2, 16384 bytes)

UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

NET: Registered protocol family 1

pci 0000:00:00.0: Found enabled HT MSI Mapping

pci 0000:00:05.0: Boot video device

pci 0000:00:09.0: Found disabled HT MSI Mapping

pci 0000:00:0e.0: Enabling HT MSI Mapping

pci 0000:00:09.0: Found disabled HT MSI Mapping

pci 0000:00:0f.0: Enabling HT MSI Mapping

pci 0000:00:09.0: Found disabled HT MSI Mapping

pci 0000:00:10.0: Enabling HT MSI Mapping

pci 0000:00:09.0: Found disabled HT MSI Mapping

pci 0000:00:10.1: Enabling HT MSI Mapping

PCI: CLS 32 bytes, default 64

Trying to unpack rootfs image as initramfs...

Freeing initrd memory: 4424k freed

apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)

apm: overridden by ACPI.

audit: initializing netlink socket (disabled)

type=2000 audit(1307274622.365:1): initialized

highmem bounce pool size: 64 pages

HugeTLB registered 4 MB page size, pre-allocated 0 pages

VFS: Disk quotas dquot_6.5.2

Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

msgmni has been set to 1599

Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

io scheduler noop registered

io scheduler deadline registered

io scheduler cfq registered (default)

pcieport 0000:00:04.0: setting latency timer to 64

pcieport 0000:00:04.0: irq 40 for MSI/MSI-X

vesafb: framebuffer at 0xe0000000, mapped to 0xf3c80000, using 1875k, total 65536k

vesafb: mode is 800x600x16, linelength=1600, pages=2

vesafb: protected mode interface info at c000:d230

vesafb: pmi: set display start = c00cd266, set palette = c00cd2d0

vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da

vesafb: scrolling: redraw

vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0

Console: switching to colour frame buffer device 100x37

fb0: VESA VGA frame buffer device

ERST: Table is not found!

Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

Linux agpgart interface v0.103

isapnp: Scanning for PnP cards...

brd: module loaded

i8042: PNP: PS/2 Controller [PNP0303S2K] at 0x60,0x64 irq 1

i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp

serio: i8042 KBD port at 0x60,0x64 irq 1

mousedev: PS/2 mouse device common for all mice

rtc_cmos 00:04: RTC can wake from S4

rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0

rtc0: alarms up to one year, y3k, 242 bytes nvram

cpuidle: using governor ladder

cpuidle: using governor menu

TCP cubic registered

Registering the dns_resolver key type

Using IPI No-Shortcut mode

PM: Checking hibernation image partition UUID=2045a62c-cc1e-40db-96a6-2ad6f575c0d1

isapnp: No Plug & Play device found

input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

PM: Hibernation image not present or could not be loaded.

registered taskstats version 1

Magic number: 15:327:832

rtc_cmos 00:04: setting system clock to 2011-06-05 11:50:23 UTC (1307274623)

BIOS EDD facility v0.16 2004-Jun-25, 1 devices found

Freeing unused kernel memory: 556k freed

Write protecting the kernel text: 3560k

Write protecting the kernel read-only data: 1636k

nash-hotplug (37): /proc/37/oom_adj is deprecated, please use /proc/37/oom_score_adj instead.

usbcore: registered new interface driver usbfs

usbcore: registered new interface driver hub

usbcore: registered new device driver usb

usbcore: registered new interface driver usbhid

usbhid: USB HID core driver

ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23

ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 23 (level, low) -> IRQ 23

ehci_hcd 0000:00:0b.1: setting latency timer to 64

ehci_hcd 0000:00:0b.1: EHCI Host Controller

ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 1

ehci_hcd 0000:00:0b.1: debug port 1

ehci_hcd 0000:00:0b.1: cache line size of 32 is not supported

ehci_hcd 0000:00:0b.1: irq 23, io mem 0xfe02e000

ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00

usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb1: Product: EHCI Host Controller

usb usb1: Manufacturer: Linux 2.6.38.7-desktop-1.mga ehci_hcd

usb usb1: SerialNumber: 0000:00:0b.1

hub 1-0:1.0: USB hub found

hub 1-0:1.0: 8 ports detected

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22

ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22

ohci_hcd 0000:00:0b.0: setting latency timer to 64

ohci_hcd 0000:00:0b.0: OHCI Host Controller

ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2

ohci_hcd 0000:00:0b.0: irq 22, io mem 0xfe02f000

usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

usb usb2: Product: OHCI Host Controller

usb usb2: Manufacturer: Linux 2.6.38.7-desktop-1.mga ohci_hcd

usb usb2: SerialNumber: 0000:00:0b.0

hub 2-0:1.0: USB hub found

hub 2-0:1.0: 8 ports detected

uhci_hcd: USB Universal Host Controller Interface driver

SCSI subsystem initialized

libata version 3.00 loaded.

sata_nv 0000:00:0e.0: version 3.5

ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21

sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 21 (level, low) -> IRQ 21

sata_nv 0000:00:0e.0: Using SWNCQ mode

sata_nv 0000:00:0e.0: setting latency timer to 64

scsi0 : sata_nv

scsi1 : sata_nv

ata1: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xdc00 irq 21

ata2: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xdc08 irq 21

ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20

sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 20 (level, low) -> IRQ 20

sata_nv 0000:00:0f.0: Using SWNCQ mode

sata_nv 0000:00:0f.0: setting latency timer to 64

scsi2 : sata_nv

scsi3 : sata_nv

ata3: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc800 irq 20

ata4: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc808 irq 20

usb 1-1: new high speed USB device using ehci_hcd and address 2

usb 1-1: New USB device found, idVendor=05e3, idProduct=0608

usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0

usb 1-1: Product: USB2.0 Hub

hub 1-1:1.0: USB hub found

hub 1-1:1.0: 4 ports detected

ata3: SATA link down (SStatus 0 SControl 310)

usb 1-5: new high speed USB device using ehci_hcd and address 4

ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)

ata1.00: ATA-7: WDC WD1600JS-60NCB1, 10.02E02, max UDMA/100

ata1.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32)

ata1.00: configured for UDMA/100

scsi 0:0:0:0: Direct-Access ATA WDC WD1600JS-60N 10.0 PQ: 0 ANSI: 5

sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)

sd 0:0:0:0: [sda] Write Protect is off

sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

sda: detected capacity change from 0 to 160041885696

sda: sda1 sda2 < sda5 sda6 >

sd 0:0:0:0: [sda] Attached SCSI disk

usb 1-5: New USB device found, idVendor=058f, idProduct=6362

usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3

usb 1-5: Product: Mass Storage Device

usb 1-5: Manufacturer: Generic

usb 1-5: SerialNumber: 058F312D81B

usb 1-8: new high speed USB device using ehci_hcd and address 5

ata2: SATA link down (SStatus 0 SControl 310)

usb 1-8: New USB device found, idVendor=15a9, idProduct=0004

usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0

usb 1-8: Product: USB Wireless 802.11b/g adaptor

usb 1-8: Manufacturer: Gemtek

ata4: SATA link down (SStatus 0 SControl 310)

pata_acpi 0000:00:0d.0: setting latency timer to 64

Uniform Multi-Platform E-IDE driver

ide-gd driver 1.18

amd74xx 0000:00:0d.0: UDMA133 controller

amd74xx 0000:00:0d.0: IDE controller (0x10de:0x0265 rev 0xa1)

amd74xx 0000:00:0d.0: IDE port disabled

amd74xx 0000:00:0d.0: not 100% native mode: will probe irqs later

AMD_IDE 0000:00:0d.0: setting latency timer to 64

ide0: BM-DMA at 0xf000-0xf007

Probing IDE interface ide0...

usb 2-3: new full speed USB device using ohci_hcd and address 2

usb 2-3: New USB device found, idVendor=046d, idProduct=c52f

usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0

usb 2-3: Product: USB Receiver

usb 2-3: Manufacturer: Logitech

input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.0/input/input1

generic-usb 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:0b.0-3/input0

input: Logitech USB Receiver as /devices/pci0000:00/0000:00:0b.0/usb2/2-3/2-3:1.1/input/input2

generic-usb 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:0b.0-3/input1

hda: TSSTcorpCD/DVDW TS-H652M, ATAPI CD/DVD-ROM drive

hda: host max PIO5 wanted PIO255(auto-tune) selected PIO4

hda: UDMA/33 mode selected

ide0 at 0x1f0-0x1f7,0x3f6 on irq 14

EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl

Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.

udev[114]: starting version 166

ACPI: Fan [FAN] (on)

input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3

ACPI: Power Button [PWRB]

input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4

ACPI: Power Button [PWRF]

device-mapper: uevent: version 1.0.3

device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com

k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141

thermal LNXTHERM:00: registered as thermal_zone0

ACPI: Thermal Zone [THRM] (40 C)

ACPI: acpi_idle registered with cpuidle

powernow-k8: Found 1 AMD Sempron(tm) Processor 3200+ (1 cpu cores) (version 2.20.00)

powernow-k8: 0 : fid 0xa (1800 MHz), vid 0xe

powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x16

nvidia: module license 'NVIDIA' taints kernel.

Disabling lock debugging due to kernel taint

ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16

nvidia 0000:00:05.0: PCI INT A -> Link[APC7] -> GSI 16 (level, low) -> IRQ 16

nvidia 0000:00:05.0: setting latency timer to 64

vgaarb: device changed decodes: PCI:0000:00:05.0,olddecodes=io+mem,decodes=none:owns=io+mem

NVRM: loading NVIDIA UNIX x86 Kernel Module 270.41.19 Mon May 16 23:31:36 PDT 2011

EXT4-fs (sda1): re-mounted. Opts: acl

EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl

Adding 4088504k swap on /dev/sda5. Priority:-1 extents:1 across:4088504k

NET: Registered protocol family 10

forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.

ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23

forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23

forcedeth 0000:00:14.0: setting latency timer to 64

NV_TCO: NV TCO WatchDog Timer Driver v0.01

NV_TCO: Watchdog reboot not detected.

NV_TCO: initialized (0x4440). heartbeat=30 sec (nowayout=1)

Initializing USB Mass Storage driver...

scsi4 : usb-storage 1-5:1.0

usbcore: registered new interface driver usb-storage

USB Mass Storage support registered.

ide-cd driver 5.00

ide-cd: hda: ATAPI 40X DVD-ROM DVD-R/RAM CD-R/RW drive, 2048kB Cache

cdrom: Uniform CD-ROM driver Revision: 3.20

ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16

firewire_ohci 0000:02:05.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16

firewire_ohci: Added fw-ohci device 0000:02:05.0, OHCI v1.0, 8 IR + 8 IT contexts, quirks 0x0

cfg80211: Calling CRDA to update world regulatory domain

sd 0:0:0:0: Attached scsi generic sg0 type 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

Buffer I/O error on device hda, logical block 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

Buffer I/O error on device hda, logical block 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

Buffer I/O error on device hda, logical block 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

Buffer I/O error on device hda, logical block 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

Buffer I/O error on device hda, logical block 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

Buffer I/O error on device hda, logical block 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

cfg80211: World regulatory domain updated:

cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

end_request: I/O error, dev hda, sector 0

Buffer I/O error on device hda, logical block 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

Buffer I/O error on device hda, logical block 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

usbcore: registered new interface driver uas

end_request: I/O error, dev hda, sector 0

Buffer I/O error on device hda, logical block 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

Buffer I/O error on device hda, logical block 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 16

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 128

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 128

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 128

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 16

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 128

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 64

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 64

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 64

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 64

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 64

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 64

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 64

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 64

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 64

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 64

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 16

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 128

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 128

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 16

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command error: error=0x54 { AbortedCommand LastFailedSense=0x05 }

hda: possibly failed opcode: 0xa0

end_request: I/O error, dev hda, sector 0

hda: command error: status=0x51 { DriveReady SeekComplete Error }

hda: command erro

Modération :

L'intervention d' Etienne à été scindée et déplacée :

http://www.mageialinux-online.org/forum/topic-10594.php#m106858

Merci

@+