connexion reseau sans fil
blocage connexion
Cauldron, la prochaine version de Mageia
jjska Membre non connecté
-
- Voir le profil du membre jjska
- Inscrit le : 21/07/2019
- Groupes :
Au lancement de Mageia10 RC1 mes connexions réseau sans fil sont systématiquement bloquées.
En console la commande rfkill list donne :
0: ideapad_wlan: Wireless LAN
Soft blocked: yes
Hard blocked: no
1: ideapad_bluetooth: Bluetooth
Soft blocked: yes
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: no
3: hci0: Bluetooth
Soft blocked: yes
Hard blocked: no
je suis obligé de lancer en utilisateur lambda la commande rfkill unblock all pour débloquer les connexions et obtenir :
0: ideapad_wlan: Wireless LAN
Soft blocked: no
Hard blocked: no
1: ideapad_bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
3: hci0: Bluetooth
Soft blocked: no
Après cette commande ma connexion wifi fonctionne.
J' ajoute que lors de l'installation de Mageia10 RC1 j'avais paramétré ma connexion au réseau en wifi, le test de la connexion à ce moment avait abouti à un message d'erreur, et l'obligation au redémarrage de l'ordinateur l'obligation d'utiliser rfkill unblock all. Cela ne m'a pas étonné car c'était déjà le cas avec Mageia 9, 8 (j'ai oublié pour les versions précedentes).
Ce problème est il déjà connu ?
Cordialement.
jjska Membre non connecté
-
- Voir le profil du membre jjska
- Inscrit le : 21/07/2019
- Groupes :
Le premier problème provient de l'installation du rpm tlp 1.9.1-1.mga10
tlp - Advanced power management tool for Linux
la suppression de ce paquet fait disparaitre le blocage des connexions à chaque lancement.
Je n'avais jamais installé ce paquet jusqu'à le tester avec Mageia10 RC1.
Reste le problème de blocage systématique lors de l'installation depuis plusieurs versions de Mageia.
BAud Membre non connecté
-
- Voir le profil du membre BAud
- Inscrit le : 18/11/2017
- Site internet
- Groupes :
Aurais-tu le résultat le `inxi -Fa` pour identifier mieux ton matériel ? (un IdeaPad visiblement, mais on aura ton DE et ton chipset wifi/le pilote le gérant... on verra si NetworkManager est actif).
Avec une connexion wifi (ou filaire...) peux-tu lancer hw-probe -all -upload # et fournir l'URL obtenue ?
Cela permettra de parcourir ton dmesg pour voir ce qui se passe au démarrage et suscite le blocage du wifi.
Pour TLP (Advanced power management tool for Linux), cela cherche à optimiser la batterie, ce qui a tendance à désactiver ce qui consomme, charge à l'utilisateur de le réactiver s'il en a besoin...
Édité par BAud Le 11/06/2026 à 15h41
jjska Membre non connecté
-
- Voir le profil du membre jjska
- Inscrit le : 21/07/2019
- Groupes :
Voici le résultat de inxi -Fa !
Caché :
System:
Host: localhost Kernel: 6.18.26-desktop-3.mga10 arch: x86_64 bits: 64
compiler: gcc v: 15.2.0 clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.18.26-desktop-3.mga10
root=UUID=9c7cdf02-ada0-4659-8e79-5d532fd6aa11 ro noiswmd
resume=UUID=9663b7c8-b98a-4186-9b7f-328c704bce47 audit=0 vga=791
Desktop: KDE Plasma v: 6.5.5 tk: Qt v: N/A info: frameworks v: 6.22.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: Mageia 10
Machine:
Type: Laptop System: LENOVO product: 80XM v: Lenovo ideapad 320-17IKB
serial: <superuser required> Chassis: type: 10 v: Lenovo ideapad 320-17IKB
serial: <superuser required>
Mobo: LENOVO model: LNVNB161216 v: SDK0J40709 WIN
serial: <superuser required>
part-nu: LENOVO_MT_80XM_BU_idea_FM_ideapad 320-17IKB
uuid: <superuser required> Firmware: UEFI vendor: LENOVO v: 4WCN45WW
date: 04/28/2019
Battery:
ID-1: BAT0 charge: 16.6 Wh (80.8%) condition: 20.5/30 Wh (68.4%)
power: 12.2 W volts: 7.18 min: 7.5 model: SMP L16M2PB1 type: Li-poly
serial: 3923 charging: status: discharging type: standard
avail: long_life,standard cycles: N/A
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M525
serial: f2-a6-7d-e9 charge: 100% (should be ignored) rechargeable: yes
status: discharging
CPU:
Info: model: Intel Core i7-7500U bits: 64 type: MT MCP arch: Amber/Kaby Lake
note: check gen: core 7 level: v3 note: check built: 2017
process: Intel 14nm family: 6 model-id: 0x8E (142) stepping: 9
microcode: 0xF6
Topology: cpus: 1x dies: 1 clusters: 2 cores: 2 threads: 4 tpc: 2
smt: enabled cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB
desc: 2x256 KiB L3: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 700 min/max: 400/3500 scaling: driver: intel_pstate
governor: powersave cores: 1: 700 2: 700 3: 700 4: 700 bogomips: 23199
Flags-basic: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: gather_data_sampling mitigation: Microcode
Type: ghostwrite status: Not affected
Type: indirect_target_selection status: Not affected
Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: old_microcode status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: IBRS
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: IBRS; IBPB: conditional; STIBP: conditional;
RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds mitigation: Microcode
Type: tsa status: Not affected
Type: tsx_async_abort status: Not affected
Type: vmscape mitigation: IBPB before exit to userspace
Graphics:
Device-1: Intel Kaby Lake-U GT2 [HD Graphics 620] vendor: Lenovo
driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
ports: active: eDP-1 empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0
chip-ID: 8086:5916 class-ID: 0300
Device-2: NVIDIA GM108M [GeForce 920MX] vendor: Lenovo driver: nouveau
v: kernel alternate: nvidiafb non-free: 550-580.xx+ status: current (as of
2025-11; EOL~2026-12-xx) arch: Maxwell code: GMxxx process: TSMC 28nm
built: 2014-2019 pcie: gen: 1 speed: 2.5 GT/s lanes: 4 link-max: gen: 3
speed: 8 GT/s bus-ID: 01:00.0 chip-ID: 10de:134f class-ID: 0302
Device-3: Chicony EasyCamera driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-8:4 chip-ID: 04f2:b5d7
class-ID: 0e02 serial: 0x0001
Display: wayland server: X.org v: 1.21.1.22 with: Xwayland v: 24.1.11
compositor: kwin_wayland driver: X: loaded: modesetting,v4l
dri: iris,nouveau gpu: i915 display-ID: 0
Monitor-1: eDP-1 model: AU Optronics 0x219e built: 2015 res: 1600x900
dpi: 106 gamma: 1.2 size: 382x214mm (15.04x8.43") diag: 438mm (17.2")
ratio: 16:9 modes: 1600x900
API: EGL v: 1.5 hw: drv: intel iris drv: nvidia nouveau platforms:
device: 0 drv: nouveau device: 1 drv: iris device: 2 drv: swrast gbm:
drv: nouveau surfaceless: drv: nouveau wayland: drv: iris x11: drv: iris
API: OpenGL v: 4.6 compat-v: 4.3 vendor: intel mesa v: 26.0.6 glx-v: 1.4
direct-render: yes renderer: Mesa Intel HD Graphics 620 (KBL GT2)
device-ID: 8086:5916 memory: 7.35 GiB unified: yes display-ID: :1.0
API: Vulkan v: 1.4.335 layers: 5 device: 0 type: integrated-gpu name: Intel
HD Graphics 620 (KBL GT2) driver: mesa intel v: 26.0.6
device-ID: 8086:5916 surfaces: N/A device: 1 type: discrete-gpu
name: NVIDIA GeForce 920MX (NVK GM108) driver: mesa nvk v: 26.0.6
device-ID: 10de:134f surfaces: N/A device: 2 type: cpu name: llvmpipe
(LLVM 20.1.8 256 bits) driver: mesa llvmpipe v: 26.0.6 (LLVM 20.1.8)
device-ID: 10005:0000 surfaces: N/A
Info: Tools: api: eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: Intel Sunrise Point-LP HD Audio vendor: Lenovo
driver: snd_hda_intel v: kernel alternate: snd_soc_avs,snd_sof_pci_intel_skl
bus-ID: 00:1f.3 chip-ID: 8086:9d71 class-ID: 0403
API: ALSA v: k6.18.26-desktop-3.mga10 status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: jack_control
Server-2: PipeWire v: 1.6.2 status: off with: pipewire-media-session
status: off tools: N/A
Server-3: PulseAudio v: 17.0 status: active tools: pacat,pactl
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: Lenovo driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
port: 4000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp2s0 state: down mac: 54:e1:ad:92:b1:54
Device-2: Realtek RTL8821AE 802.11ac PCIe Wireless Network Adapter
vendor: Lenovo driver: rtl8821ae v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: 3000 bus-ID: 03:00.0 chip-ID: 10ec:8821 class-ID: 0280
IF: wlp3s0 state: up mac: 60:14:b3:b3:fc:85
Info: services: wpa_supplicant
Bluetooth:
Device-1: Realtek RTL8821A Bluetooth driver: btusb v: 0.8 type: USB rev: 2.1
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-7:3 chip-ID: 0bda:0821
class-ID: e001 serial: 00e04c000001
Report: hciconfig ID: hci0 rfk-id: 2 state: down bt-service: disabled
rfk-block: hardware: no software: yes address: 60:14:B3:B3:FC:86
Info: acl-mtu: 820:8 sco-mtu: 255:16 link-policy: rswitch hold sniff park
link-mode: peripheral accept
Drives:
Local Storage: total: 1.13 TiB used: 266.36 GiB (23.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD10SPZX-24Z10T0 size: 931.51 GiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: WD-WXB1E57EJXT9
fw-rev: 1A01 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Crucial model: CT240BX500SSD1
size: 223.57 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: 2340E87D38F5 fw-rev: 056 scheme: GPT
Partition:
ID-1: / raw-size: 52.74 GiB size: 51.61 GiB (97.86%) used: 9.81 GiB (19.0%)
fs: ext4 dev: /dev/sdb2 maj-min: 8:18
ID-2: /home raw-size: 170.74 GiB size: 167 GiB (97.81%)
used: 102.01 GiB (61.1%) fs: ext4 dev: /dev/sdb3 maj-min: 8:19
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: partition size: 4 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sda3 maj-min: 8:3
Sensors:
System Temperatures: cpu: 33.0 C pch: 33.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 8 GiB note: est. available: 7.53 GiB used: 1.95 GiB (25.8%)
Processes: 187 Power: uptime: 1m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 2.93 GiB services: org_kde_powerdevil,upowerd
Init: systemd v: 258 default: graphical tool: systemctl
Packages: pm: rpm pkgs: N/A note: see --rpm tools: urpmi pm: flatpak
pkgs: 0 Compilers: N/A Shell: Bash v: 5.3.0 running-in: konsole inxi: 3.3.40
Host: localhost Kernel: 6.18.26-desktop-3.mga10 arch: x86_64 bits: 64
compiler: gcc v: 15.2.0 clocksource: tsc avail: hpet,acpi_pm
parameters: BOOT_IMAGE=/boot/vmlinuz-6.18.26-desktop-3.mga10
root=UUID=9c7cdf02-ada0-4659-8e79-5d532fd6aa11 ro noiswmd
resume=UUID=9663b7c8-b98a-4186-9b7f-328c704bce47 audit=0 vga=791
Desktop: KDE Plasma v: 6.5.5 tk: Qt v: N/A info: frameworks v: 6.22.0
wm: kwin_wayland vt: 1 dm: SDDM Distro: Mageia 10
Machine:
Type: Laptop System: LENOVO product: 80XM v: Lenovo ideapad 320-17IKB
serial: <superuser required> Chassis: type: 10 v: Lenovo ideapad 320-17IKB
serial: <superuser required>
Mobo: LENOVO model: LNVNB161216 v: SDK0J40709 WIN
serial: <superuser required>
part-nu: LENOVO_MT_80XM_BU_idea_FM_ideapad 320-17IKB
uuid: <superuser required> Firmware: UEFI vendor: LENOVO v: 4WCN45WW
date: 04/28/2019
Battery:
ID-1: BAT0 charge: 16.6 Wh (80.8%) condition: 20.5/30 Wh (68.4%)
power: 12.2 W volts: 7.18 min: 7.5 model: SMP L16M2PB1 type: Li-poly
serial: 3923 charging: status: discharging type: standard
avail: long_life,standard cycles: N/A
Device-1: hidpp_battery_0 model: Logitech Wireless Mouse M525
serial: f2-a6-7d-e9 charge: 100% (should be ignored) rechargeable: yes
status: discharging
CPU:
Info: model: Intel Core i7-7500U bits: 64 type: MT MCP arch: Amber/Kaby Lake
note: check gen: core 7 level: v3 note: check built: 2017
process: Intel 14nm family: 6 model-id: 0x8E (142) stepping: 9
microcode: 0xF6
Topology: cpus: 1x dies: 1 clusters: 2 cores: 2 threads: 4 tpc: 2
smt: enabled cache: L1: 128 KiB desc: d-2x32 KiB; i-2x32 KiB L2: 512 KiB
desc: 2x256 KiB L3: 4 MiB desc: 1x4 MiB
Speed (MHz): avg: 700 min/max: 400/3500 scaling: driver: intel_pstate
governor: powersave cores: 1: 700 2: 700 3: 700 4: 700 bogomips: 23199
Flags-basic: avx avx2 ht lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx
Vulnerabilities:
Type: gather_data_sampling mitigation: Microcode
Type: ghostwrite status: Not affected
Type: indirect_target_selection status: Not affected
Type: itlb_multihit status: KVM: Split huge pages
Type: l1tf mitigation: PTE Inversion; VMX: conditional cache flushes, SMT
vulnerable
Type: mds mitigation: Clear CPU buffers; SMT vulnerable
Type: meltdown mitigation: PTI
Type: mmio_stale_data mitigation: Clear CPU buffers; SMT vulnerable
Type: old_microcode status: Not affected
Type: reg_file_data_sampling status: Not affected
Type: retbleed mitigation: IBRS
Type: spec_rstack_overflow status: Not affected
Type: spec_store_bypass mitigation: Speculative Store Bypass disabled via
prctl
Type: spectre_v1 mitigation: usercopy/swapgs barriers and __user pointer
sanitization
Type: spectre_v2 mitigation: IBRS; IBPB: conditional; STIBP: conditional;
RSB filling; PBRSB-eIBRS: Not affected; BHI: Not affected
Type: srbds mitigation: Microcode
Type: tsa status: Not affected
Type: tsx_async_abort status: Not affected
Type: vmscape mitigation: IBPB before exit to userspace
Graphics:
Device-1: Intel Kaby Lake-U GT2 [HD Graphics 620] vendor: Lenovo
driver: i915 v: kernel arch: Gen-9.5 process: Intel 14nm built: 2016-20
ports: active: eDP-1 empty: DP-1,HDMI-A-1,HDMI-A-2 bus-ID: 00:02.0
chip-ID: 8086:5916 class-ID: 0300
Device-2: NVIDIA GM108M [GeForce 920MX] vendor: Lenovo driver: nouveau
v: kernel alternate: nvidiafb non-free: 550-580.xx+ status: current (as of
2025-11; EOL~2026-12-xx) arch: Maxwell code: GMxxx process: TSMC 28nm
built: 2014-2019 pcie: gen: 1 speed: 2.5 GT/s lanes: 4 link-max: gen: 3
speed: 8 GT/s bus-ID: 01:00.0 chip-ID: 10de:134f class-ID: 0302
Device-3: Chicony EasyCamera driver: uvcvideo type: USB rev: 2.0
speed: 480 Mb/s lanes: 1 mode: 2.0 bus-ID: 1-8:4 chip-ID: 04f2:b5d7
class-ID: 0e02 serial: 0x0001
Display: wayland server: X.org v: 1.21.1.22 with: Xwayland v: 24.1.11
compositor: kwin_wayland driver: X: loaded: modesetting,v4l
dri: iris,nouveau gpu: i915 display-ID: 0
Monitor-1: eDP-1 model: AU Optronics 0x219e built: 2015 res: 1600x900
dpi: 106 gamma: 1.2 size: 382x214mm (15.04x8.43") diag: 438mm (17.2")
ratio: 16:9 modes: 1600x900
API: EGL v: 1.5 hw: drv: intel iris drv: nvidia nouveau platforms:
device: 0 drv: nouveau device: 1 drv: iris device: 2 drv: swrast gbm:
drv: nouveau surfaceless: drv: nouveau wayland: drv: iris x11: drv: iris
API: OpenGL v: 4.6 compat-v: 4.3 vendor: intel mesa v: 26.0.6 glx-v: 1.4
direct-render: yes renderer: Mesa Intel HD Graphics 620 (KBL GT2)
device-ID: 8086:5916 memory: 7.35 GiB unified: yes display-ID: :1.0
API: Vulkan v: 1.4.335 layers: 5 device: 0 type: integrated-gpu name: Intel
HD Graphics 620 (KBL GT2) driver: mesa intel v: 26.0.6
device-ID: 8086:5916 surfaces: N/A device: 1 type: discrete-gpu
name: NVIDIA GeForce 920MX (NVK GM108) driver: mesa nvk v: 26.0.6
device-ID: 10de:134f surfaces: N/A device: 2 type: cpu name: llvmpipe
(LLVM 20.1.8 256 bits) driver: mesa llvmpipe v: 26.0.6 (LLVM 20.1.8)
device-ID: 10005:0000 surfaces: N/A
Info: Tools: api: eglinfo, glxinfo, vulkaninfo
de: kscreen-console,kscreen-doctor x11: xdpyinfo, xprop, xrandr
Audio:
Device-1: Intel Sunrise Point-LP HD Audio vendor: Lenovo
driver: snd_hda_intel v: kernel alternate: snd_soc_avs,snd_sof_pci_intel_skl
bus-ID: 00:1f.3 chip-ID: 8086:9d71 class-ID: 0403
API: ALSA v: k6.18.26-desktop-3.mga10 status: kernel-api with: aoss
type: oss-emulator tools: alsactl,alsamixer,amixer
Server-1: JACK v: 1.9.22 status: off tools: jack_control
Server-2: PipeWire v: 1.6.2 status: off with: pipewire-media-session
status: off tools: N/A
Server-3: PulseAudio v: 17.0 status: active tools: pacat,pactl
Network:
Device-1: Realtek RTL8111/8168/8211/8411 PCI Express Gigabit Ethernet
vendor: Lenovo driver: r8169 v: kernel pcie: gen: 1 speed: 2.5 GT/s lanes: 1
port: 4000 bus-ID: 02:00.0 chip-ID: 10ec:8168 class-ID: 0200
IF: enp2s0 state: down mac: 54:e1:ad:92:b1:54
Device-2: Realtek RTL8821AE 802.11ac PCIe Wireless Network Adapter
vendor: Lenovo driver: rtl8821ae v: kernel pcie: gen: 1 speed: 2.5 GT/s
lanes: 1 port: 3000 bus-ID: 03:00.0 chip-ID: 10ec:8821 class-ID: 0280
IF: wlp3s0 state: up mac: 60:14:b3:b3:fc:85
Info: services: wpa_supplicant
Bluetooth:
Device-1: Realtek RTL8821A Bluetooth driver: btusb v: 0.8 type: USB rev: 2.1
speed: 12 Mb/s lanes: 1 mode: 1.1 bus-ID: 1-7:3 chip-ID: 0bda:0821
class-ID: e001 serial: 00e04c000001
Report: hciconfig ID: hci0 rfk-id: 2 state: down bt-service: disabled
rfk-block: hardware: no software: yes address: 60:14:B3:B3:FC:86
Info: acl-mtu: 820:8 sco-mtu: 255:16 link-policy: rswitch hold sniff park
link-mode: peripheral accept
Drives:
Local Storage: total: 1.13 TiB used: 266.36 GiB (23.1%)
SMART Message: Unable to run smartctl. Root privileges required.
ID-1: /dev/sda maj-min: 8:0 vendor: Western Digital
model: WD10SPZX-24Z10T0 size: 931.51 GiB block-size: physical: 4096 B
logical: 512 B speed: 6.0 Gb/s tech: HDD rpm: 5400 serial: WD-WXB1E57EJXT9
fw-rev: 1A01 scheme: GPT
ID-2: /dev/sdb maj-min: 8:16 vendor: Crucial model: CT240BX500SSD1
size: 223.57 GiB block-size: physical: 512 B logical: 512 B speed: 6.0 Gb/s
tech: SSD serial: 2340E87D38F5 fw-rev: 056 scheme: GPT
Partition:
ID-1: / raw-size: 52.74 GiB size: 51.61 GiB (97.86%) used: 9.81 GiB (19.0%)
fs: ext4 dev: /dev/sdb2 maj-min: 8:18
ID-2: /home raw-size: 170.74 GiB size: 167 GiB (97.81%)
used: 102.01 GiB (61.1%) fs: ext4 dev: /dev/sdb3 maj-min: 8:19
Swap:
Kernel: swappiness: 60 (default) cache-pressure: 100 (default) zswap: no
ID-1: swap-1 type: partition size: 4 GiB used: 0 KiB (0.0%) priority: -2
dev: /dev/sda3 maj-min: 8:3
Sensors:
System Temperatures: cpu: 33.0 C pch: 33.0 C mobo: N/A
Fan Speeds (rpm): N/A
Info:
Memory: total: 8 GiB note: est. available: 7.53 GiB used: 1.95 GiB (25.8%)
Processes: 187 Power: uptime: 1m states: freeze,mem,disk suspend: deep
avail: s2idle wakeups: 0 hibernate: platform avail: shutdown, reboot,
suspend, test_resume image: 2.93 GiB services: org_kde_powerdevil,upowerd
Init: systemd v: 258 default: graphical tool: systemctl
Packages: pm: rpm pkgs: N/A note: see --rpm tools: urpmi pm: flatpak
pkgs: 0 Compilers: N/A Shell: Bash v: 5.3.0 running-in: konsole inxi: 3.3.40
pour hw-probe -all -upload voici le lien
https://linux-hardware.org/?probe=c7f5d16208
avec rfkill le bluetooth est blocked (https://linux-hardware.org/?probe=c7f5d16208&log=rfkill), c'est normal je l'ai désactivé.
Le plus embétant c'est lors d'une nouvelle installation d'être obligé d'utiliser rfkill unblock. J'ai l'habitude mais cela pourrait bloquer un nouvel utilisateur.
BAud Membre non connecté
-
- Voir le profil du membre BAud
- Inscrit le : 18/11/2017
- Site internet
- Groupes :
pour le inxi -Fa :
> Host: localhost Kernel: 6.18.26-desktop-3.mga10 arch: x86_64 bits: 64
tu as oublié de faire la mise à jour (j'en suis au noyau 6.18.33)
> Display: wayland server: X.org v: 1.21.1.22 with: Xwayland v: 24.1.11
> compositor: kwin_wayland driver: X: loaded: modesetting,v4l
KDE/Plasma avec wayland (ça ne change rien à la gestion du réseau, hormis ce qui est à utiliser pour le paramétrage).
> Device-2: Realtek RTL8821AE 802.11ac PCIe Wireless Network Adapter
> vendor: Lenovo driver: rtl8821ae v: kernel pcie: gen: 1 speed: 2.5 GT/s
> lanes: 1 port: 3000 bus-ID: 03:00.0 chip-ID: 10ec:8821 class-ID: 0280
> IF: wlp3s0 state: up mac: 60:14:b3:b3:fc:85
> Info: services: wpa_supplicant
ok du realtek, pilote rtl8821ae
le dmesg donnera plus d'infos et les services : tu n'as pas choisi NetworkManager ?
Pour le bluetook, ok ça se voit
> Bluetooth:
> Device-1: Realtek RTL8821A Bluetooth driver: btusb v: 0.8 type: USB rev: 2.1
> speed: 12 Mb/s lanes: 1 bus-ID: 1-7:3 chip-ID: 0bda:0821 class-ID: e001
> Report: hciconfig ID: hci0 rfk-id: 2 state: down bt-service: disabled
> rfk-block: hardware: no software: yes
et c'est confirmé par https://linux-hardware.org/?probe=c7f5d16208&log=rfkill
pour le dmesg : ça me semble correct
> [ 8.663197] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_29.bin
> [ 8.663204] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_wowlan.bin
> [ 8.666495] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
> [ 8.667489] rtlwifi: rtlwifi: wireless switch is on
> [ 8.697397] rtl8821ae 0000:03:00.0 wlp3s0: renamed from wlan0
donc au boot le wifi semble opérationnel. Ce n'est qu'après le 1er boot que tu es obligé de jouer du rfkill ou à chaque fois ?
> [ 11.411204] warning: `iwconfig' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
ça c'est une erreur "normale", j'ai la même, ce sera sans doute corrigé par la suite
et le wifi s'associe correctement sans indiquer si tu as dû changer l'état avec rfkill (as-tu dû le faire ?) :
> [ 18.144717] wlp3s0: authenticate with XXX (local address=XXX)
> [ 18.144728] wlp3s0: send auth to XXX (try 1/3)
> [ 18.146844] wlp3s0: authenticated
> [ 18.148846] wlp3s0: associate with XXX (try 1/3)
> [ 18.152647] wlp3s0: RX AssocResp from XXX (capab=0x1411 status=0 aid=2)
> [ 18.153643] wlp3s0: associated
> [ 18.155568] wlp3s0: Limiting TX power to 20 (20 - 0) dBm as advertised by XXX
Bref, besoin d'investiguer un peu plus :
- confirmer si option UEFI pour le wifi
- mise à jour par un urpmi --auto-update # ça ne devrait pas changer le comportement
- pourquoi ne pas utiliser NetworkManager ? tu utilises l'applet réseau mga / draknetcenter ou celle de KDE ?
- besoin ou pas de rfkill à chaque fois pour activer le wifi ?
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie