écran freeze avec mageia 9 [Réglé]
lorsque j'installe un périphérique usb, quelques mn après l'écran se gèle
Système et matériels / Installation et configuration
domchab Membre non connecté
-
- Voir le profil du membre domchab
- Inscrit le : 07/07/2011
- Groupes :
J'ai réinstallé un ordinateur précédemment installé avec mageia 7 en mettant une mageia 9 avec un bureau Gnome.
C'est un intel5 sur une carte reconnue comme i810 avec en plus une carte graphique mais j'utilise l'écran sur la carte mère directement. (le tout a une dizaine d'année)
Lorsque je mets un périphérique usb (en dehors du clavier et de la souris), j'ai l'écran qui se fige après quelques min en général quand je travaille sur une fenêtre de navigateur (mais pas que). J'ai cela avec une clef usb wifi (et du coup pour avoir internet il faut que je fasse un montage baroque avec la prise ethernet, un hub usb ethernet et mon téléphone portable) et avec un périphérique TV Cinergy. Ces 2 periphériques ne me posaient pas de problèmes auparavant.
Je suis allé voir dans les fichiers logs (Syslog, messages etc) et je ne vois rien de particulier.
Est ce que cela dit quelque chose à quelqu'un et que faire pour préciser le diagnostic et trouver la solution?
Merci de vos aides à tous
Édité par domchab Le 05/02/2024 à 19h36
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
Ça ne me dit rien (qui vaille).
L'écran se fige comment ? Définitivement, un certain temps ?
domchab Membre non connecté
-
- Voir le profil du membre domchab
- Inscrit le : 07/07/2011
- Groupes :
Définitivement, en tout cas suffisamment longtemps pour que je fasse un reset. Le clavier est aussi bloqué en même temps (bascule majuscule ne marche plus).
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
Le dmesg ne concerne que la session en cours, il me semble, donc ne voit pas le souci d'avant.
La commande pour explorer les soucis d'avant est, en root :
journalctl -b -1 --no-hostname
Ajoute -p3 pour n'avoir que les messages concernant au moins une erreur.
Au niveau du pilote graphique, il est maintenant recommandé d'avoir le pilote Xorg/modesetting avec les cartes Intel.
domchab Membre non connecté
-
- Voir le profil du membre domchab
- Inscrit le : 07/07/2011
- Groupes :
Merci de ton retour. J'ai changé le pilote graphique mais sur le freeze, cela ne change pas.
journalctl -b -1 --no-hostname -p3
févr. 06 21:15:20 systemd-udevd[545]: /etc/udev/rules.d/60-brother-brscan4-libsane-type1.rules:9 Invalid key 'SYSFS'
févr. 06 21:15:20 systemd-udevd[545]: /etc/udev/rules.d/60-brother-libsane-type1-inst.rules:14 Invalid key 'SYSFS'
févr. 06 21:15:20 systemd-udevd[545]: /etc/udev/rules.d/60-brother-libsane-type1.rules:17 Invalid key 'SYSFS'
févr. 06 21:15:22 kernel: mei_me 0000:00:16.0: wait hw ready failed
févr. 06 21:15:22 kernel: mei_me 0000:00:16.0: hw_start failed ret = -62
févr. 06 21:15:24 kernel: mei_me 0000:00:16.0: wait hw ready failed
févr. 06 21:15:24 kernel: mei_me 0000:00:16.0: hw_start failed ret = -62
févr. 06 21:15:26 kernel: mei_me 0000:00:16.0: wait hw ready failed
févr. 06 21:15:26 kernel: mei_me 0000:00:16.0: hw_start failed ret = -62
févr. 06 21:15:26 kernel: mei_me 0000:00:16.0: reset: reached maximal consecutive resets: disabling the device
févr. 06 21:15:26 kernel: mei_me 0000:00:16.0: reset failed ret = -19
févr. 06 21:15:26 kernel: mei_me 0000:00:16.0: link layer initialization failed.
févr. 06 21:15:26 kernel: mei_me 0000:00:16.0: init hw failure.
févr. 06 21:15:26 kernel: mei_me 0000:00:16.0: initialization failed.
févr. 06 21:15:28 systemd[1]: Failed to start mdmonitor.service.
févr. 06 21:15:32 systemd[1]: Failed to start network.service.
févr. 06 21:15:32 libvirtd[1544]: internal error: Failed to apply firewall rules /usr/sbin/iptables -w --table mangle --insert POSTROUTING --jump LIBVIRT_PRT: iptables v1.8.9 (legacy): Couldn't load target `LIBVIRT_PRT':No such file or d>
Try `iptables -h' or 'iptables --help' for more information.
févr. 06 21:15:34 kernel: nouveau 0000:01:00.0: msvld: unable to load firmware data
févr. 06 21:15:34 kernel: nouveau 0000:01:00.0: msvld: init failed, -19
févr. 06 21:15:35 pulseaudio[1984]: GetManagedObjects() failed: org.freedesktop.systemd1.NoSuchUnit: Unit dbus-org.bluez.service not found.
févr. 06 21:16:01 pulseaudio[2403]: Échec d’ouverture du module module-raop-discover.so : module-raop-discover.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
févr. 06 21:16:01 pulseaudio[2403]: Failed to open module "module-raop-discover".
févr. 06 21:16:01 pulseaudio[2403]: pa_module_load() failed
févr. 06 21:16:01 pulseaudio[2403]: Échec d’ouverture du module module-zeroconf-discover.so : module-zeroconf-discover.so: Ne peut ouvrir le fichier d'objet partagé: Aucun fichier ou dossier de ce type
févr. 06 21:16:01 pulseaudio[2403]: Failed to open module "module-zeroconf-discover".
févr. 06 21:16:01 pulseaudio[2403]: pa_module_load() failed
févr. 06 21:16:01 pulseaudio[2403]: GetManagedObjects() failed: org.freedesktop.systemd1.NoSuchUnit: Unit dbus-org.bluez.service not found.
[root@localhost ~]#
Je n'ai rien après 21:16 alors que mon écran figé , c'était à 21:27:16. ??
Sinon je ne vois rien d'autre
Merci d'avance de tes conseils
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
Supprimes le -p3 pour voir ce qu'il se passe après.
Il se peut que le plantage soit si brutal que rien n'est enregistré.
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
domchab Membre non connecté
-
- Voir le profil du membre domchab
- Inscrit le : 07/07/2011
- Groupes :
sudo lshw -C display
*-display
description: VGA compatible controller
produit: G98 [GeForce 8400 GS Rev. 2]
fabriquant: NVIDIA Corporation
identifiant matériel: 0
information bus: pci@0000:01:00.0
version: a1
bits: 64 bits
horloge: 33MHz
fonctionnalités: pm msi pciexpress vga_controller bus_master cap_list rom
configuration: driver=nouveau latency=0
ressources: irq:26 mémoire:f8000000-f8ffffff mémoire:e0000000-efffffff mémoire:f6000000-f7ffffff portE/S:df00(taille=128) mémoire:f9000000-f901ffff
*-display
description: VGA compatible controller
produit: Core Processor Integrated Graphics Controller
fabriquant: Intel Corporation
identifiant matériel: 2
information bus: pci@0000:00:02.0
version: 18
bits: 64 bits
horloge: 33MHz
fonctionnalités: msi pm vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
ressources: irq:27 mémoire:fb800000-fbbfffff mémoire:d0000000-dfffffff portE/S:ff00(taille=8) mémoire:c0000-dffff
Bon, sinon, je n'ai pas de Xorg.0 sur /var/log/; je n'ai qu'un Xorg.9 qui date de lundi dernier. Pour retrouver un Xorg.0.log, il faut que j'aille dans .local/share/xorg. J'essaye de l'attacher à ce message (en le renommant car l'extension à l'air de poser pb), mais je ne vois rien qui m'attire l'attention.
domchab Membre non connecté
-
- Voir le profil du membre domchab
- Inscrit le : 07/07/2011
- Groupes :
domchab Membre non connecté
-
- Voir le profil du membre domchab
- Inscrit le : 07/07/2011
- Groupes :
[ 42.866] (--) Log file renamed from "/home/parents/.local/share/xorg/Xorg.pid-2312.log" to "/home/parents/.local/share/xorg/Xorg.0.log"
[ 42.867]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 42.867] Current Operating System: Linux localhost 6.5.13-desktop-6.mga9 #1 SMP PREEMPT_DYNAMIC Sun Dec 17 22:42:25 UTC 2023 x86_64
[ 42.867] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.5.13-desktop-6.mga9 root=UUID=1264b8d4-2da5-407c-b571-355047834c86 ro splash quiet noiswmd resume=UUID=933c136a-0e60-48d2-8658-7819d226a7e5 audit=0 vga=791
[ 42.867] Build ID: x11-server 21.1.8-7.3.mga9
[ 42.867] Current version of pixman: 0.42.2
[ 42.867] Before reporting problems, check https://bugs.mageia.org
to make sure that you have the latest version.
[ 42.867] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 42.867] (==) Log file: "/home/parents/.local/share/xorg/Xorg.0.log", Time: Wed Feb 7 14:02:50 2024
[ 42.867] (==) Using config file: "/etc/X11/xorg.conf"
[ 42.867] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 42.867] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 42.869] (==) ServerLayout "layout1"
[ 42.869] (**) |-->Screen "screen1" (0)
[ 42.869] (**) | |-->Monitor "monitor1"
[ 42.869] (**) | |-->Device "device1"
[ 42.869] (**) |-->Screen "screen2" (1)
[ 42.869] (**) | |-->Monitor "monitor2"
[ 42.869] (**) | |-->Device "device2"
[ 42.869] (**) Option "DontZap" "False"
[ 42.869] (**) Option "AllowMouseOpenFail"
[ 42.869] (==) Automatically adding devices
[ 42.869] (==) Automatically enabling devices
[ 42.869] (==) Automatically adding GPU devices
[ 42.869] (==) Automatically binding GPU devices
[ 42.869] (==) Max clients allowed: 512, resource mask: 0xfffff
[ 42.869] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 42.869] (**) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 42.869] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 42.869] (II) Loader magic: 0x631e20
[ 42.869] (II) Module ABI versions:
[ 42.869] X.Org ANSI C Emulation: 0.4
[ 42.869] X.Org Video Driver: 25.2
[ 42.869] X.Org XInput driver : 24.4
[ 42.869] X.Org Server Extension : 10.0
[ 42.870] (++) using VT number 2
[ 42.872] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[ 42.874] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 42.875] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 42.876] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 14 paused 0
[ 42.876] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 42.876] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 42.877] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 15 paused 0
[ 42.881] (--) PCI:*(0@0:2:0) 8086:0042:1458:d000 rev 24, Mem @ 0xfb800000/4194304, 0xd0000000/268435456, I/O @ 0x0000ff00/8, BIOS @ 0x????????/131072
[ 42.881] (--) PCI: (1@0:0:0) 10de:06e4:1458:349c rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
[ 42.881] (II) Open ACPI successful (/var/run/acpid.socket)
[ 42.881] (II) "glx" will be loaded by default.
[ 42.881] (II) LoadModule: "v4l"
[ 42.882] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[ 42.883] (II) Module v4l: vendor="X.Org Foundation"
[ 42.883] compiled for 1.21.1.7, module version = 0.1.1
[ 42.883] ABI class: X.Org Video Driver, version 25.2
[ 42.883] (II) LoadModule: "glx"
[ 42.883] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 42.886] (II) Module glx: vendor="X.Org Foundation"
[ 42.886] compiled for 1.21.1.8, module version = 1.0.0
[ 42.887] ABI class: X.Org Server Extension, version 10.0
[ 42.887] (II) LoadModule: "modesetting"
[ 42.887] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 42.888] (II) Module modesetting: vendor="X.Org Foundation"
[ 42.888] compiled for 1.21.1.8, module version = 1.21.1
[ 42.888] Module class: X.Org Video Driver
[ 42.888] ABI class: X.Org Video Driver, version 25.2
[ 42.888] (II) LoadModule: "nouveau"
[ 42.888] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 42.890] (II) Module nouveau: vendor="X.Org Foundation"
[ 42.890] compiled for 1.21.1.7, module version = 1.0.17
[ 42.890] Module class: X.Org Video Driver
[ 42.890] ABI class: X.Org Video Driver, version 25.2
[ 42.890] (II) v4l driver for Video4Linux overlay mode (V4L2)
[ 42.890] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 42.890] (II) NOUVEAU driver
[ 42.890] (II) NOUVEAU driver for NVIDIA chipset families :
[ 42.891] RIVA TNT (NV04)
[ 42.891] RIVA TNT2 (NV05)
[ 42.891] GeForce 256 (NV10)
[ 42.891] GeForce 2 (NV11, NV15)
[ 42.891] GeForce 4MX (NV17, NV18)
[ 42.891] GeForce 3 (NV20)
[ 42.891] GeForce 4Ti (NV25, NV28)
[ 42.891] GeForce FX (NV3x)
[ 42.891] GeForce 6 (NV4x)
[ 42.891] GeForce 7 (G7x)
[ 42.891] GeForce 8 (G8x)
[ 42.891] GeForce 9 (G9x)
[ 42.891] GeForce GTX 2xx/3xx (GT2xx)
[ 42.891] GeForce GTX 4xx/5xx (GFxxx)
[ 42.891] GeForce GTX 6xx/7xx (GKxxx)
[ 42.891] GeForce GTX 9xx (GMxxx)
[ 42.891] GeForce GTX 10xx (GPxxx)
[ 42.891] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[ 42.891] (WW) Falling back to old probe method for v4l
[ 42.891] (II) modeset(0): using drv /dev/dri/card1
[ 42.892] (II) [drm] nouveau interface version: 1.3.1
[ 42.892] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 42.892] (II) modeset(0): Creating default Display subsection in Screen section
"screen1" for depth/fbbpp 24/32
[ 42.892] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 42.892] (==) modeset(0): RGB weight 888
[ 42.892] (==) modeset(0): Default visual is TrueColor
[ 42.892] (II) Loading sub module "glamoregl"
[ 42.892] (II) LoadModule: "glamoregl"
[ 42.892] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 42.897] (II) Module glamoregl: vendor="X.Org Foundation"
[ 42.897] compiled for 1.21.1.8, module version = 1.0.1
[ 42.897] ABI class: X.Org ANSI C Emulation, version 0.4
[ 42.946] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics (ILK)
[ 42.946] (II) modeset(0): glamor initialized
[ 42.946] (==) modeset(0): VariableRefresh: disabled
[ 42.946] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 42.959] (II) modeset(0): Output VGA-1 using monitor section monitor1
[ 42.960] (II) modeset(0): Output HDMI-1 has no monitor section
[ 42.961] (II) modeset(0): Output DP-1 has no monitor section
[ 42.962] (II) modeset(0): Output HDMI-2 has no monitor section
[ 42.963] (II) modeset(0): Output HDMI-3 has no monitor section
[ 42.963] (II) modeset(0): Output DP-2 has no monitor section
[ 42.963] (II) modeset(0): Output DP-3 has no monitor section
[ 42.977] (II) modeset(0): EDID for output VGA-1
[ 42.977] (II) modeset(0): Manufacturer: MSI Model: 30b0 Serial#: 0
[ 42.977] (II) modeset(0): Year: 2022 Week: 32
[ 42.977] (II) modeset(0): EDID Version: 1.3
[ 42.977] (II) modeset(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 42.977] (II) modeset(0): Sync: Separate
[ 42.977] (II) modeset(0): Max Image Size [cm]: horiz.: 52 vert.: 30
[ 42.977] (II) modeset(0): Gamma: 2.20
[ 42.977] (II) modeset(0): DPMS capabilities: Off; RGB/Color Display
[ 42.977] (II) modeset(0): First detailed timing is preferred mode
[ 42.977] (II) modeset(0): redX: 0.635 redY: 0.349 greenX: 0.331 greenY: 0.618
[ 42.977] (II) modeset(0): blueX: 0.154 blueY: 0.055 whiteX: 0.312 whiteY: 0.329
[ 42.977] (II) modeset(0): Supported established timings:
[ 42.977] (II) modeset(0): 720x400@70Hz
[ 42.977] (II) modeset(0): 640x480@60Hz
[ 42.977] (II) modeset(0): 640x480@67Hz
[ 42.977] (II) modeset(0): 640x480@72Hz
[ 42.977] (II) modeset(0): 640x480@75Hz
[ 42.977] (II) modeset(0): 800x600@56Hz
[ 42.977] (II) modeset(0): 800x600@60Hz
[ 42.977] (II) modeset(0): 800x600@72Hz
[ 42.977] (II) modeset(0): 800x600@75Hz
[ 42.977] (II) modeset(0): 832x624@75Hz
[ 42.977] (II) modeset(0): 1024x768@60Hz
[ 42.977] (II) modeset(0): 1024x768@70Hz
[ 42.977] (II) modeset(0): 1024x768@75Hz
[ 42.977] (II) modeset(0): 1280x1024@75Hz
[ 42.977] (II) modeset(0): 1152x864@75Hz
[ 42.977] (II) modeset(0): Manufacturer's mask: 0
[ 42.977] (II) modeset(0): Supported standard timings:
[ 42.977] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 42.977] (II) modeset(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 42.977] (II) modeset(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 42.977] (II) modeset(0): #3: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 42.977] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 42.977] (II) modeset(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 42.977] (II) modeset(0): #6: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 42.977] (II) modeset(0): Supported detailed timing:
[ 42.977] (II) modeset(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 42.977] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 42.978] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 42.978] (II) modeset(0): Ranges: V min: 48 V max: 75 Hz, H min: 24 H max: 86 kHz, PixClock max 185 MHz
[ 42.978] (II) modeset(0): Monitor name: MSI MP242C
[ 42.978] (II) modeset(0): Serial No: PB0M012801868
[ 42.978] (II) modeset(0): EDID (in hex):
[ 42.978] (II) modeset(0): 00ffffffffffff003669b03000000000
[ 42.978] (II) modeset(0): 2020010308341e782a9d81a259549e27
[ 42.978] (II) modeset(0): 0e5054bfef80714f8140818081c09500
[ 42.978] (II) modeset(0): b30081000101023a801871382d40582c
[ 42.978] (II) modeset(0): 450009252100001e000000fd00304b18
[ 42.978] (II) modeset(0): 5612000a202020202020000000fc004d
[ 42.978] (II) modeset(0): 5349204d50323432430a2020000000ff
[ 42.978] (II) modeset(0): 005042304d303132383031383638001e
[ 42.978] (II) modeset(0): Printing probed modes for output VGA-1
[ 42.978] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 42.978] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 42.978] (II) modeset(0): Modeline "1280x1024"x76.2 135.00 1280 1288 1392 1664 1024 1027 1030 1064 (81.1 kHz)
[ 42.978] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 42.978] (II) modeset(0): Modeline "1280x1024"x75.0 134.99 1280 1317 1429 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 42.978] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 42.978] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 42.978] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 42.978] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 42.978] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 42.978] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 42.978] (II) modeset(0): Modeline "1152x768"x68.4 78.74 1152 1173 1269 1440 768 769 772 800 +vsync (54.7 kHz)
[ 42.978] (II) modeset(0): Modeline "1024x768"x98.2 112.62 1024 1076 1248 1420 768 768 780 808 +hsync +vsync (79.3 kHz)
[ 42.978] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 42.978] (II) modeset(0): Modeline "1024x768"x74.8 78.53 1024 1049 1145 1312 768 769 772 800 +hsync +vsync (59.9 kHz)
[ 42.978] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 42.978] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1032 1176 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 42.978] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 42.978] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 42.978] (II) modeset(0): Modeline "832x624"x74.2 57.00 832 876 940 1152 624 625 628 667 -hsync -vsync (49.5 kHz)
[ 42.978] (II) modeset(0): Modeline "800x600"x186.0 100.00 800 816 824 840 600 616 624 640 -hsync -vsync (119.0 kHz)
[ 42.978] (II) modeset(0): Modeline "800x600"x94.9 62.36 800 821 901 1040 600 601 604 632 +hsync +vsync (60.0 kHz)
[ 42.978] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 42.978] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 42.978] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 42.978] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 42.978] (II) modeset(0): Modeline "768x576"x100.0 63.07 768 800 960 1024 576 578 590 616 (61.6 kHz)
[ 42.978] (II) modeset(0): Modeline "768x576"x79.4 50.00 768 832 846 1000 576 590 595 630 (50.0 kHz)
[ 42.978] (II) modeset(0): Modeline "640x480"x116.7 49.89 640 661 725 832 480 481 484 514 +hsync +vsync (60.0 kHz)
[ 42.978] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 42.978] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 42.978] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 42.978] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 42.978] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 42.979] (II) modeset(0): EDID for output HDMI-1
[ 42.979] (II) modeset(0): EDID for output DP-1
[ 42.980] (II) modeset(0): EDID for output HDMI-2
[ 42.981] (II) modeset(0): EDID for output HDMI-3
[ 42.981] (II) modeset(0): EDID for output DP-2
[ 42.981] (II) modeset(0): EDID for output DP-3
[ 42.981] (II) modeset(0): Output VGA-1 connected
[ 42.981] (II) modeset(0): Output HDMI-1 disconnected
[ 42.981] (II) modeset(0): Output DP-1 disconnected
[ 42.982] (II) modeset(0): Output HDMI-2 disconnected
[ 42.982] (II) modeset(0): Output HDMI-3 disconnected
[ 42.982] (II) modeset(0): Output DP-2 disconnected
[ 42.982] (II) modeset(0): Output DP-3 disconnected
[ 42.982] (II) modeset(0): Using exact sizes for initial modes
[ 42.982] (II) modeset(0): Output VGA-1 using initial mode 1920x1080 +0+0
[ 42.982] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 42.982] (==) modeset(0): DPI set to (96, 96)
[ 42.982] (II) Loading sub module "fb"
[ 42.982] (II) LoadModule: "fb"
[ 42.982] (II) Module "fb" already built-in
[ 42.982] (II) Loading sub module "dri2"
[ 42.982] (II) LoadModule: "dri2"
[ 42.982] (II) Module "dri2" already built-in
[ 42.982] (--) NOUVEAU(1): Chipset: "NVIDIA NV98"
[ 42.982] (II) NOUVEAU(1): Creating default Display subsection in Screen section
"screen2" for depth/fbbpp 24/32
[ 42.982] (==) NOUVEAU(1): Depth 24, (--) framebuffer bpp 32
[ 42.982] (==) NOUVEAU(1): RGB weight 888
[ 42.982] (==) NOUVEAU(1): Default visual is TrueColor
[ 42.982] (==) NOUVEAU(1): Using HW cursor
[ 42.982] (==) NOUVEAU(1): Allowed maximum DRI level 2.
[ 42.982] (==) NOUVEAU(1): GLX sync to VBlank enabled.
[ 42.982] (==) NOUVEAU(1): Page flipping enabled
[ 42.982] (==) NOUVEAU(1): Swap limit set to 1 [Max allowed 2]
[ 42.982] (==) NOUVEAU(1): Page flipping synced to vblank by kernel.
[ 42.982] (II) NOUVEAU(1): Initializing outputs ...
[ 42.994] (II) NOUVEAU(1): Output DVI-I-1 using monitor section monitor2
[ 43.004] (II) NOUVEAU(1): Output VGA-2 has no monitor section
[ 43.004] (II) NOUVEAU(1): 2 crtcs needed for screen.
[ 43.005] (II) NOUVEAU(1): Allocated crtc nr. 0 to this screen.
[ 43.005] (II) NOUVEAU(1): Allocated crtc nr. 1 to this screen.
[ 43.016] (II) NOUVEAU(1): EDID for output DVI-I-1
[ 43.027] (II) NOUVEAU(1): EDID for output VGA-2
[ 43.027] (II) NOUVEAU(1): Output DVI-I-1 disconnected
[ 43.027] (II) NOUVEAU(1): Output VGA-2 disconnected
[ 43.027] (WW) NOUVEAU(1): No outputs definitely connected, trying again...
[ 43.027] (II) NOUVEAU(1): Output DVI-I-1 disconnected
[ 43.027] (II) NOUVEAU(1): Output VGA-2 disconnected
[ 43.027] (WW) NOUVEAU(1): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 43.027] (==) NOUVEAU(1): Using gamma correction (1.0, 1.0, 1.0)
[ 43.027] (II) NOUVEAU(1): Virtual size is 1024x768 (pitch 0)
[ 43.027] (**) NOUVEAU(1): Mode "(null)": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 43.027] (II) NOUVEAU(1): Modeline "(null)"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 43.027] (==) NOUVEAU(1): DPI set to (96, 96)
[ 43.027] (II) Loading sub module "fb"
[ 43.027] (II) LoadModule: "fb"
[ 43.027] (II) Module "fb" already built-in
[ 43.027] (II) Loading sub module "shadowfb"
[ 43.027] (II) LoadModule: "shadowfb"
[ 43.027] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[ 43.028] (II) Module shadowfb: vendor="X.Org Foundation"
[ 43.028] compiled for 1.21.1.8, module version = 1.0.0
[ 43.028] ABI class: X.Org ANSI C Emulation, version 0.4
[ 43.390] (==) modeset(0): Backing store enabled
[ 43.390] (==) modeset(0): Silken mouse enabled
[ 43.398] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 43.398] (**) modeset(0): DPMS enabled
[ 43.399] (II) modeset(0): [DRI2] Setup complete
[ 43.399] (II) modeset(0): [DRI2] DRI driver: crocus
[ 43.399] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 43.400] (II) NOUVEAU(1): Channel setup complete.
[ 43.401] (II) NOUVEAU(1): Hardware support for Present enabled
[ 43.401] (II) NOUVEAU(1): [DRI2] Setup complete
[ 43.401] (II) NOUVEAU(1): [DRI2] DRI driver: nouveau
[ 43.401] (II) NOUVEAU(1): [DRI2] VDPAU driver: nouveau
[ 43.401] (II) Loading sub module "exa"
[ 43.401] (II) LoadModule: "exa"
[ 43.401] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 43.402] (II) Module exa: vendor="X.Org Foundation"
[ 43.402] compiled for 1.21.1.8, module version = 2.6.0
[ 43.402] ABI class: X.Org Video Driver, version 25.2
[ 43.402] (II) EXA(1): Driver allocated offscreen pixmaps
[ 43.402] (II) EXA(1): Driver registered support for the following operations:
[ 43.402] (II) Solid
[ 43.402] (II) Copy
[ 43.402] (II) Composite (RENDER acceleration)
[ 43.402] (II) UploadToScreen
[ 43.402] (II) DownloadFromScreen
[ 43.402] (==) NOUVEAU(1): Backing store enabled
[ 43.402] (==) NOUVEAU(1): Silken mouse enabled
[ 43.403] (II) NOUVEAU(1): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 43.403] (II) NOUVEAU(1): [XvMC] Extension initialized.
[ 43.403] (**) NOUVEAU(1): DPMS enabled
[ 43.403] (II) Initializing extension Generic Event Extension
[ 43.403] (II) Initializing extension SHAPE
[ 43.404] (II) Initializing extension MIT-SHM
[ 43.404] (II) Initializing extension XInputExtension
[ 43.405] (II) Initializing extension XTEST
[ 43.405] (II) Initializing extension BIG-REQUESTS
[ 43.405] (II) Initializing extension SYNC
[ 43.406] (II) Initializing extension XKEYBOARD
[ 43.406] (II) Initializing extension XC-MISC
[ 43.406] (II) Initializing extension SECURITY
[ 43.407] (II) Initializing extension XFIXES
[ 43.407] (II) Initializing extension RENDER
[ 43.407] (II) Initializing extension RANDR
[ 43.407] (II) Initializing extension COMPOSITE
[ 43.408] (II) Initializing extension DAMAGE
[ 43.408] (II) Initializing extension MIT-SCREEN-SAVER
[ 43.408] (II) Initializing extension DOUBLE-BUFFER
[ 43.409] (II) Initializing extension RECORD
[ 43.409] (II) Initializing extension DPMS
[ 43.409] (II) Initializing extension Present
[ 43.409] (II) Initializing extension DRI3
[ 43.410] (II) Initializing extension X-Resource
[ 43.410] (II) Initializing extension XVideo
[ 43.410] (II) Initializing extension XVideo-MotionCompensation
[ 43.410] (II) Initializing extension GLX
[ 43.429] (II) AIGLX: Loaded and initialized crocus
[ 43.429] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 43.444] (II) AIGLX: Loaded and initialized nouveau
[ 43.444] (II) GLX: Initialized DRI2 GL provider for screen 1
[ 43.444] (II) Initializing extension XFree86-VidModeExtension
[ 43.444] (II) Initializing extension XFree86-DGA
[ 43.445] (II) Initializing extension XFree86-DRI
[ 43.445] (II) Initializing extension DRI2
[ 43.445] (II) modeset(0): Damage tracking initialized
[ 43.445] (II) modeset(0): Setting screen physical size to 508 x 285
[ 43.447] (II) NOUVEAU(1): NVEnterVT is called.
[ 43.675] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 43.675] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 43.675] (**) Power Button: Applying InputClass "system-keyboard"
[ 43.675] (II) LoadModule: "libinput"
[ 43.676] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 43.679] (II) Module libinput: vendor="X.Org Foundation"
[ 43.679] compiled for 1.21.1.7, module version = 1.2.1
[ 43.679] Module class: X.Org XInput Driver
[ 43.679] ABI class: X.Org XInput driver, version 24.4
[ 43.680] (II) Using input driver 'libinput' for 'Power Button'
[ 43.681] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 33 paused 0
[ 43.681] (**) Power Button: always reports core events
[ 43.681] (**) Option "Device" "/dev/input/event1"
[ 43.688] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 43.688] (II) event1 - Power Button: device is a keyboard
[ 43.688] (II) event1 - Power Button: device removed
[ 43.688] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 43.688] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 43.688] (**) Option "xkb_model" "pc105"
[ 43.688] (**) Option "xkb_layout" "fr"
[ 43.689] (**) Option "xkb_options" "compose:rwin"
[ 43.720] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 43.721] (II) event1 - Power Button: device is a keyboard
[ 43.722] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 43.722] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 43.722] (**) Power Button: Applying InputClass "system-keyboard"
[ 43.722] (II) Using input driver 'libinput' for 'Power Button'
[ 43.723] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 36 paused 0
[ 43.723] (**) Power Button: always reports core events
[ 43.723] (**) Option "Device" "/dev/input/event0"
[ 43.725] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 43.725] (II) event0 - Power Button: device is a keyboard
[ 43.726] (II) event0 - Power Button: device removed
[ 43.726] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 43.726] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 43.726] (**) Option "xkb_model" "pc105"
[ 43.726] (**) Option "xkb_layout" "fr"
[ 43.726] (**) Option "xkb_options" "compose:rwin"
[ 43.727] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 43.728] (II) event0 - Power Button: device is a keyboard
[ 43.732] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event2)
[ 43.732] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 43.732] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[ 43.733] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 37 paused 0
[ 43.733] (**) Logitech USB Optical Mouse: always reports core events
[ 43.733] (**) Option "Device" "/dev/input/event2"
[ 43.736] (II) event2 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 43.736] (II) event2 - Logitech USB Optical Mouse: device is a pointer
[ 43.737] (II) event2 - Logitech USB Optical Mouse: device removed
[ 43.737] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/0003:046D:C077.0001/input/input2/event2"
[ 43.737] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[ 43.738] (**) Option "AccelerationScheme" "none"
[ 43.738] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[ 43.738] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 43.738] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 43.740] (II) event2 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 43.741] (II) event2 - Logitech USB Optical Mouse: device is a pointer
[ 43.743] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 43.743] (II) No input driver specified, ignoring this device.
[ 43.743] (II) This device may have been added with another device file.
[ 43.744] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event3)
[ 43.744] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 43.744] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[ 43.744] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[ 43.746] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 38 paused 0
[ 43.746] (**) Logitech USB Keyboard: always reports core events
[ 43.746] (**) Option "Device" "/dev/input/event3"
[ 43.749] (II) event3 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 43.750] (II) event3 - Logitech USB Keyboard: device is a keyboard
[ 43.750] (II) event3 - Logitech USB Keyboard: device removed
[ 43.750] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:046D:C31C.0002/input/input3/event3"
[ 43.750] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 43.750] (**) Option "xkb_model" "pc105"
[ 43.750] (**) Option "xkb_layout" "fr"
[ 43.750] (**) Option "xkb_options" "compose:rwin"
[ 43.755] (II) event3 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 43.755] (II) event3 - Logitech USB Keyboard: device is a keyboard
[ 43.757] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event4)
[ 43.757] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 43.757] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "system-keyboard"
[ 43.757] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[ 43.758] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 39 paused 0
[ 43.758] (**) Logitech USB Keyboard Consumer Control: always reports core events
[ 43.758] (**) Option "Device" "/dev/input/event4"
[ 43.762] (II) event4 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 43.762] (II) event4 - Logitech USB Keyboard Consumer Control: device is a keyboard
[ 43.763] (II) event4 - Logitech USB Keyboard Consumer Control: device removed
[ 43.763] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/0003:046D:C31C.0003/input/input4/event4"
[ 43.763] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 10)
[ 43.763] (**) Option "xkb_model" "pc105"
[ 43.763] (**) Option "xkb_layout" "fr"
[ 43.763] (**) Option "xkb_options" "compose:rwin"
[ 43.766] (II) event4 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 43.766] (II) event4 - Logitech USB Keyboard Consumer Control: device is a keyboard
[ 43.768] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event5)
[ 43.768] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 43.768] (**) Logitech USB Keyboard System Control: Applying InputClass "system-keyboard"
[ 43.768] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[ 43.770] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 40 paused 0
[ 43.770] (**) Logitech USB Keyboard System Control: always reports core events
[ 43.770] (**) Option "Device" "/dev/input/event5"
[ 43.773] (II) event5 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[ 43.773] (II) event5 - Logitech USB Keyboard System Control: device is a keyboard
[ 43.773] (II) event5 - Logitech USB Keyboard System Control: device removed
[ 43.773] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/0003:046D:C31C.0003/input/input5/event5"
[ 43.773] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 11)
[ 43.773] (**) Option "xkb_model" "pc105"
[ 43.773] (**) Option "xkb_layout" "fr"
[ 43.773] (**) Option "xkb_options" "compose:rwin"
[ 43.776] (II) event5 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[ 43.776] (II) event5 - Logitech USB Keyboard System Control: device is a keyboard
[ 43.777] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event9)
[ 43.777] (II) No input driver specified, ignoring this device.
[ 43.777] (II) This device may have been added with another device file.
[ 43.778] (II) config/udev: Adding input device HDA Intel MID Line Out Front (/dev/input/event10)
[ 43.778] (II) No input driver specified, ignoring this device.
[ 43.778] (II) This device may have been added with another device file.
[ 43.779] (II) config/udev: Adding input device HDA Intel MID Line Out Surround (/dev/input/event11)
[ 43.779] (II) No input driver specified, ignoring this device.
[ 43.779] (II) This device may have been added with another device file.
[ 43.780] (II) config/udev: Adding input device HDA Intel MID Line Out CLFE (/dev/input/event12)
[ 43.780] (II) No input driver specified, ignoring this device.
[ 43.780] (II) This device may have been added with another device file.
[ 43.781] (II) config/udev: Adding input device HDA Intel MID Line Out Side (/dev/input/event13)
[ 43.781] (II) No input driver specified, ignoring this device.
[ 43.781] (II) This device may have been added with another device file.
[ 43.781] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event14)
[ 43.782] (II) No input driver specified, ignoring this device.
[ 43.782] (II) This device may have been added with another device file.
[ 43.782] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event15)
[ 43.782] (II) No input driver specified, ignoring this device.
[ 43.782] (II) This device may have been added with another device file.
[ 43.783] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 43.783] (II) No input driver specified, ignoring this device.
[ 43.783] (II) This device may have been added with another device file.
[ 43.784] (II) config/udev: Adding input device HDA Intel MID Front Mic (/dev/input/event7)
[ 43.784] (II) No input driver specified, ignoring this device.
[ 43.784] (II) This device may have been added with another device file.
[ 43.785] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event8)
[ 43.785] (II) No input driver specified, ignoring this device.
[ 43.785] (II) This device may have been added with another device file.
[ 44.830] (II) modeset(0): EDID vendor "MSI", prod id 12464
[ 44.830] (II) modeset(0): Using EDID range info for horizontal sync
[ 44.830] (II) modeset(0): Using EDID range info for vertical refresh
[ 44.830] (II) modeset(0): Printing DDC gathered Modelines:
[ 44.830] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 44.830] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 44.830] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 44.830] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 44.830] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 44.830] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 44.831] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 44.831] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 44.831] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 44.831] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 44.831] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 44.831] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 44.831] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 44.831] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 44.831] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 44.831] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 44.831] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 44.831] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 44.831] (II) modeset(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 44.831] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 44.831] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 44.831] (II) modeset(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 44.914] (II) modeset(0): EDID vendor "MSI", prod id 12464
[ 44.914] (II) modeset(0): Using hsync ranges from config file
[ 44.914] (II) modeset(0): Using vrefresh ranges from config file
[ 44.914] (II) modeset(0): Printing DDC gathered Modelines:
[ 44.914] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 44.914] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 44.914] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 44.914] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 44.914] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 44.914] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 44.914] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 44.914] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 44.914] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 44.914] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 44.914] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 44.914] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 44.914] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 44.914] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 44.914] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 44.914] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 44.914] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 44.914] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 44.914] (II) modeset(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 44.914] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 44.914] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 44.914] (II) modeset(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 42.867]
X.Org X Server 1.21.1.8
X Protocol Version 11, Revision 0
[ 42.867] Current Operating System: Linux localhost 6.5.13-desktop-6.mga9 #1 SMP PREEMPT_DYNAMIC Sun Dec 17 22:42:25 UTC 2023 x86_64
[ 42.867] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-6.5.13-desktop-6.mga9 root=UUID=1264b8d4-2da5-407c-b571-355047834c86 ro splash quiet noiswmd resume=UUID=933c136a-0e60-48d2-8658-7819d226a7e5 audit=0 vga=791
[ 42.867] Build ID: x11-server 21.1.8-7.3.mga9
[ 42.867] Current version of pixman: 0.42.2
[ 42.867] Before reporting problems, check https://bugs.mageia.org
to make sure that you have the latest version.
[ 42.867] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 42.867] (==) Log file: "/home/parents/.local/share/xorg/Xorg.0.log", Time: Wed Feb 7 14:02:50 2024
[ 42.867] (==) Using config file: "/etc/X11/xorg.conf"
[ 42.867] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 42.867] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 42.869] (==) ServerLayout "layout1"
[ 42.869] (**) |-->Screen "screen1" (0)
[ 42.869] (**) | |-->Monitor "monitor1"
[ 42.869] (**) | |-->Device "device1"
[ 42.869] (**) |-->Screen "screen2" (1)
[ 42.869] (**) | |-->Monitor "monitor2"
[ 42.869] (**) | |-->Device "device2"
[ 42.869] (**) Option "DontZap" "False"
[ 42.869] (**) Option "AllowMouseOpenFail"
[ 42.869] (==) Automatically adding devices
[ 42.869] (==) Automatically enabling devices
[ 42.869] (==) Automatically adding GPU devices
[ 42.869] (==) Automatically binding GPU devices
[ 42.869] (==) Max clients allowed: 512, resource mask: 0xfffff
[ 42.869] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 42.869] (**) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 42.869] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 42.869] (II) Loader magic: 0x631e20
[ 42.869] (II) Module ABI versions:
[ 42.869] X.Org ANSI C Emulation: 0.4
[ 42.869] X.Org Video Driver: 25.2
[ 42.869] X.Org XInput driver : 24.4
[ 42.869] X.Org Server Extension : 10.0
[ 42.870] (++) using VT number 2
[ 42.872] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_32
[ 42.874] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 42.875] (II) Platform probe for /sys/devices/pci0000:00/0000:00:01.0/0000:01:00.0/drm/card0
[ 42.876] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 14 paused 0
[ 42.876] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 42.876] (II) Platform probe for /sys/devices/pci0000:00/0000:00:02.0/drm/card1
[ 42.877] (II) systemd-logind: got fd for /dev/dri/card1 226:1 fd 15 paused 0
[ 42.881] (--) PCI:*(0@0:2:0) 8086:0042:1458:d000 rev 24, Mem @ 0xfb800000/4194304, 0xd0000000/268435456, I/O @ 0x0000ff00/8, BIOS @ 0x????????/131072
[ 42.881] (--) PCI: (1@0:0:0) 10de:06e4:1458:349c rev 161, Mem @ 0xf8000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
[ 42.881] (II) Open ACPI successful (/var/run/acpid.socket)
[ 42.881] (II) "glx" will be loaded by default.
[ 42.881] (II) LoadModule: "v4l"
[ 42.882] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[ 42.883] (II) Module v4l: vendor="X.Org Foundation"
[ 42.883] compiled for 1.21.1.7, module version = 0.1.1
[ 42.883] ABI class: X.Org Video Driver, version 25.2
[ 42.883] (II) LoadModule: "glx"
[ 42.883] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 42.886] (II) Module glx: vendor="X.Org Foundation"
[ 42.886] compiled for 1.21.1.8, module version = 1.0.0
[ 42.887] ABI class: X.Org Server Extension, version 10.0
[ 42.887] (II) LoadModule: "modesetting"
[ 42.887] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 42.888] (II) Module modesetting: vendor="X.Org Foundation"
[ 42.888] compiled for 1.21.1.8, module version = 1.21.1
[ 42.888] Module class: X.Org Video Driver
[ 42.888] ABI class: X.Org Video Driver, version 25.2
[ 42.888] (II) LoadModule: "nouveau"
[ 42.888] (II) Loading /usr/lib64/xorg/modules/drivers/nouveau_drv.so
[ 42.890] (II) Module nouveau: vendor="X.Org Foundation"
[ 42.890] compiled for 1.21.1.7, module version = 1.0.17
[ 42.890] Module class: X.Org Video Driver
[ 42.890] ABI class: X.Org Video Driver, version 25.2
[ 42.890] (II) v4l driver for Video4Linux overlay mode (V4L2)
[ 42.890] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 42.890] (II) NOUVEAU driver
[ 42.890] (II) NOUVEAU driver for NVIDIA chipset families :
[ 42.891] RIVA TNT (NV04)
[ 42.891] RIVA TNT2 (NV05)
[ 42.891] GeForce 256 (NV10)
[ 42.891] GeForce 2 (NV11, NV15)
[ 42.891] GeForce 4MX (NV17, NV18)
[ 42.891] GeForce 3 (NV20)
[ 42.891] GeForce 4Ti (NV25, NV28)
[ 42.891] GeForce FX (NV3x)
[ 42.891] GeForce 6 (NV4x)
[ 42.891] GeForce 7 (G7x)
[ 42.891] GeForce 8 (G8x)
[ 42.891] GeForce 9 (G9x)
[ 42.891] GeForce GTX 2xx/3xx (GT2xx)
[ 42.891] GeForce GTX 4xx/5xx (GFxxx)
[ 42.891] GeForce GTX 6xx/7xx (GKxxx)
[ 42.891] GeForce GTX 9xx (GMxxx)
[ 42.891] GeForce GTX 10xx (GPxxx)
[ 42.891] xf86EnableIO: failed to enable I/O ports 0000-03ff (Operation not permitted)
[ 42.891] (WW) Falling back to old probe method for v4l
[ 42.891] (II) modeset(0): using drv /dev/dri/card1
[ 42.892] (II) [drm] nouveau interface version: 1.3.1
[ 42.892] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 42.892] (II) modeset(0): Creating default Display subsection in Screen section
"screen1" for depth/fbbpp 24/32
[ 42.892] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 42.892] (==) modeset(0): RGB weight 888
[ 42.892] (==) modeset(0): Default visual is TrueColor
[ 42.892] (II) Loading sub module "glamoregl"
[ 42.892] (II) LoadModule: "glamoregl"
[ 42.892] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[ 42.897] (II) Module glamoregl: vendor="X.Org Foundation"
[ 42.897] compiled for 1.21.1.8, module version = 1.0.1
[ 42.897] ABI class: X.Org ANSI C Emulation, version 0.4
[ 42.946] (II) modeset(0): glamor X acceleration enabled on Mesa Intel(R) HD Graphics (ILK)
[ 42.946] (II) modeset(0): glamor initialized
[ 42.946] (==) modeset(0): VariableRefresh: disabled
[ 42.946] (==) modeset(0): AsyncFlipSecondaries: disabled
[ 42.959] (II) modeset(0): Output VGA-1 using monitor section monitor1
[ 42.960] (II) modeset(0): Output HDMI-1 has no monitor section
[ 42.961] (II) modeset(0): Output DP-1 has no monitor section
[ 42.962] (II) modeset(0): Output HDMI-2 has no monitor section
[ 42.963] (II) modeset(0): Output HDMI-3 has no monitor section
[ 42.963] (II) modeset(0): Output DP-2 has no monitor section
[ 42.963] (II) modeset(0): Output DP-3 has no monitor section
[ 42.977] (II) modeset(0): EDID for output VGA-1
[ 42.977] (II) modeset(0): Manufacturer: MSI Model: 30b0 Serial#: 0
[ 42.977] (II) modeset(0): Year: 2022 Week: 32
[ 42.977] (II) modeset(0): EDID Version: 1.3
[ 42.977] (II) modeset(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 42.977] (II) modeset(0): Sync: Separate
[ 42.977] (II) modeset(0): Max Image Size [cm]: horiz.: 52 vert.: 30
[ 42.977] (II) modeset(0): Gamma: 2.20
[ 42.977] (II) modeset(0): DPMS capabilities: Off; RGB/Color Display
[ 42.977] (II) modeset(0): First detailed timing is preferred mode
[ 42.977] (II) modeset(0): redX: 0.635 redY: 0.349 greenX: 0.331 greenY: 0.618
[ 42.977] (II) modeset(0): blueX: 0.154 blueY: 0.055 whiteX: 0.312 whiteY: 0.329
[ 42.977] (II) modeset(0): Supported established timings:
[ 42.977] (II) modeset(0): 720x400@70Hz
[ 42.977] (II) modeset(0): 640x480@60Hz
[ 42.977] (II) modeset(0): 640x480@67Hz
[ 42.977] (II) modeset(0): 640x480@72Hz
[ 42.977] (II) modeset(0): 640x480@75Hz
[ 42.977] (II) modeset(0): 800x600@56Hz
[ 42.977] (II) modeset(0): 800x600@60Hz
[ 42.977] (II) modeset(0): 800x600@72Hz
[ 42.977] (II) modeset(0): 800x600@75Hz
[ 42.977] (II) modeset(0): 832x624@75Hz
[ 42.977] (II) modeset(0): 1024x768@60Hz
[ 42.977] (II) modeset(0): 1024x768@70Hz
[ 42.977] (II) modeset(0): 1024x768@75Hz
[ 42.977] (II) modeset(0): 1280x1024@75Hz
[ 42.977] (II) modeset(0): 1152x864@75Hz
[ 42.977] (II) modeset(0): Manufacturer's mask: 0
[ 42.977] (II) modeset(0): Supported standard timings:
[ 42.977] (II) modeset(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 42.977] (II) modeset(0): #1: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 42.977] (II) modeset(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 42.977] (II) modeset(0): #3: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 42.977] (II) modeset(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 42.977] (II) modeset(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 42.977] (II) modeset(0): #6: hsize: 1280 vsize 800 refresh: 60 vid: 129
[ 42.977] (II) modeset(0): Supported detailed timing:
[ 42.977] (II) modeset(0): clock: 148.5 MHz Image Size: 521 x 293 mm
[ 42.977] (II) modeset(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 42.978] (II) modeset(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 42.978] (II) modeset(0): Ranges: V min: 48 V max: 75 Hz, H min: 24 H max: 86 kHz, PixClock max 185 MHz
[ 42.978] (II) modeset(0): Monitor name: MSI MP242C
[ 42.978] (II) modeset(0): Serial No: PB0M012801868
[ 42.978] (II) modeset(0): EDID (in hex):
[ 42.978] (II) modeset(0): 00ffffffffffff003669b03000000000
[ 42.978] (II) modeset(0): 2020010308341e782a9d81a259549e27
[ 42.978] (II) modeset(0): 0e5054bfef80714f8140818081c09500
[ 42.978] (II) modeset(0): b30081000101023a801871382d40582c
[ 42.978] (II) modeset(0): 450009252100001e000000fd00304b18
[ 42.978] (II) modeset(0): 5612000a202020202020000000fc004d
[ 42.978] (II) modeset(0): 5349204d50323432430a2020000000ff
[ 42.978] (II) modeset(0): 005042304d303132383031383638001e
[ 42.978] (II) modeset(0): Printing probed modes for output VGA-1
[ 42.978] (II) modeset(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 42.978] (II) modeset(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 42.978] (II) modeset(0): Modeline "1280x1024"x76.2 135.00 1280 1288 1392 1664 1024 1027 1030 1064 (81.1 kHz)
[ 42.978] (II) modeset(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 42.978] (II) modeset(0): Modeline "1280x1024"x75.0 134.99 1280 1317 1429 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 42.978] (II) modeset(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 42.978] (II) modeset(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 42.978] (II) modeset(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 42.978] (II) modeset(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 42.978] (II) modeset(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 42.978] (II) modeset(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 42.978] (II) modeset(0): Modeline "1152x768"x68.4 78.74 1152 1173 1269 1440 768 769 772 800 +vsync (54.7 kHz)
[ 42.978] (II) modeset(0): Modeline "1024x768"x98.2 112.62 1024 1076 1248 1420 768 768 780 808 +hsync +vsync (79.3 kHz)
[ 42.978] (II) modeset(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 42.978] (II) modeset(0): Modeline "1024x768"x74.8 78.53 1024 1049 1145 1312 768 769 772 800 +hsync +vsync (59.9 kHz)
[ 42.978] (II) modeset(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 42.978] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1032 1176 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 42.978] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 42.978] (II) modeset(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 42.978] (II) modeset(0): Modeline "832x624"x74.2 57.00 832 876 940 1152 624 625 628 667 -hsync -vsync (49.5 kHz)
[ 42.978] (II) modeset(0): Modeline "800x600"x186.0 100.00 800 816 824 840 600 616 624 640 -hsync -vsync (119.0 kHz)
[ 42.978] (II) modeset(0): Modeline "800x600"x94.9 62.36 800 821 901 1040 600 601 604 632 +hsync +vsync (60.0 kHz)
[ 42.978] (II) modeset(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 42.978] (II) modeset(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 42.978] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 42.978] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 42.978] (II) modeset(0): Modeline "768x576"x100.0 63.07 768 800 960 1024 576 578 590 616 (61.6 kHz)
[ 42.978] (II) modeset(0): Modeline "768x576"x79.4 50.00 768 832 846 1000 576 590 595 630 (50.0 kHz)
[ 42.978] (II) modeset(0): Modeline "640x480"x116.7 49.89 640 661 725 832 480 481 484 514 +hsync +vsync (60.0 kHz)
[ 42.978] (II) modeset(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 42.978] (II) modeset(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 42.978] (II) modeset(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 42.978] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 42.978] (II) modeset(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 42.979] (II) modeset(0): EDID for output HDMI-1
[ 42.979] (II) modeset(0): EDID for output DP-1
[ 42.980] (II) modeset(0): EDID for output HDMI-2
[ 42.981] (II) modeset(0): EDID for output HDMI-3
[ 42.981] (II) modeset(0): EDID for output DP-2
[ 42.981] (II) modeset(0): EDID for output DP-3
[ 42.981] (II) modeset(0): Output VGA-1 connected
[ 42.981] (II) modeset(0): Output HDMI-1 disconnected
[ 42.981] (II) modeset(0): Output DP-1 disconnected
[ 42.982] (II) modeset(0): Output HDMI-2 disconnected
[ 42.982] (II) modeset(0): Output HDMI-3 disconnected
[ 42.982] (II) modeset(0): Output DP-2 disconnected
[ 42.982] (II) modeset(0): Output DP-3 disconnected
[ 42.982] (II) modeset(0): Using exact sizes for initial modes
[ 42.982] (II) modeset(0): Output VGA-1 using initial mode 1920x1080 +0+0
[ 42.982] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 42.982] (==) modeset(0): DPI set to (96, 96)
[ 42.982] (II) Loading sub module "fb"
[ 42.982] (II) LoadModule: "fb"
[ 42.982] (II) Module "fb" already built-in
[ 42.982] (II) Loading sub module "dri2"
[ 42.982] (II) LoadModule: "dri2"
[ 42.982] (II) Module "dri2" already built-in
[ 42.982] (--) NOUVEAU(1): Chipset: "NVIDIA NV98"
[ 42.982] (II) NOUVEAU(1): Creating default Display subsection in Screen section
"screen2" for depth/fbbpp 24/32
[ 42.982] (==) NOUVEAU(1): Depth 24, (--) framebuffer bpp 32
[ 42.982] (==) NOUVEAU(1): RGB weight 888
[ 42.982] (==) NOUVEAU(1): Default visual is TrueColor
[ 42.982] (==) NOUVEAU(1): Using HW cursor
[ 42.982] (==) NOUVEAU(1): Allowed maximum DRI level 2.
[ 42.982] (==) NOUVEAU(1): GLX sync to VBlank enabled.
[ 42.982] (==) NOUVEAU(1): Page flipping enabled
[ 42.982] (==) NOUVEAU(1): Swap limit set to 1 [Max allowed 2]
[ 42.982] (==) NOUVEAU(1): Page flipping synced to vblank by kernel.
[ 42.982] (II) NOUVEAU(1): Initializing outputs ...
[ 42.994] (II) NOUVEAU(1): Output DVI-I-1 using monitor section monitor2
[ 43.004] (II) NOUVEAU(1): Output VGA-2 has no monitor section
[ 43.004] (II) NOUVEAU(1): 2 crtcs needed for screen.
[ 43.005] (II) NOUVEAU(1): Allocated crtc nr. 0 to this screen.
[ 43.005] (II) NOUVEAU(1): Allocated crtc nr. 1 to this screen.
[ 43.016] (II) NOUVEAU(1): EDID for output DVI-I-1
[ 43.027] (II) NOUVEAU(1): EDID for output VGA-2
[ 43.027] (II) NOUVEAU(1): Output DVI-I-1 disconnected
[ 43.027] (II) NOUVEAU(1): Output VGA-2 disconnected
[ 43.027] (WW) NOUVEAU(1): No outputs definitely connected, trying again...
[ 43.027] (II) NOUVEAU(1): Output DVI-I-1 disconnected
[ 43.027] (II) NOUVEAU(1): Output VGA-2 disconnected
[ 43.027] (WW) NOUVEAU(1): Unable to find connected outputs - setting 1024x768 initial framebuffer
[ 43.027] (==) NOUVEAU(1): Using gamma correction (1.0, 1.0, 1.0)
[ 43.027] (II) NOUVEAU(1): Virtual size is 1024x768 (pitch 0)
[ 43.027] (**) NOUVEAU(1): Mode "(null)": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 43.027] (II) NOUVEAU(1): Modeline "(null)"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 43.027] (==) NOUVEAU(1): DPI set to (96, 96)
[ 43.027] (II) Loading sub module "fb"
[ 43.027] (II) LoadModule: "fb"
[ 43.027] (II) Module "fb" already built-in
[ 43.027] (II) Loading sub module "shadowfb"
[ 43.027] (II) LoadModule: "shadowfb"
[ 43.027] (II) Loading /usr/lib64/xorg/modules/libshadowfb.so
[ 43.028] (II) Module shadowfb: vendor="X.Org Foundation"
[ 43.028] compiled for 1.21.1.8, module version = 1.0.0
[ 43.028] ABI class: X.Org ANSI C Emulation, version 0.4
[ 43.390] (==) modeset(0): Backing store enabled
[ 43.390] (==) modeset(0): Silken mouse enabled
[ 43.398] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 43.398] (**) modeset(0): DPMS enabled
[ 43.399] (II) modeset(0): [DRI2] Setup complete
[ 43.399] (II) modeset(0): [DRI2] DRI driver: crocus
[ 43.399] (II) modeset(0): [DRI2] VDPAU driver: va_gl
[ 43.400] (II) NOUVEAU(1): Channel setup complete.
[ 43.401] (II) NOUVEAU(1): Hardware support for Present enabled
[ 43.401] (II) NOUVEAU(1): [DRI2] Setup complete
[ 43.401] (II) NOUVEAU(1): [DRI2] DRI driver: nouveau
[ 43.401] (II) NOUVEAU(1): [DRI2] VDPAU driver: nouveau
[ 43.401] (II) Loading sub module "exa"
[ 43.401] (II) LoadModule: "exa"
[ 43.401] (II) Loading /usr/lib64/xorg/modules/libexa.so
[ 43.402] (II) Module exa: vendor="X.Org Foundation"
[ 43.402] compiled for 1.21.1.8, module version = 2.6.0
[ 43.402] ABI class: X.Org Video Driver, version 25.2
[ 43.402] (II) EXA(1): Driver allocated offscreen pixmaps
[ 43.402] (II) EXA(1): Driver registered support for the following operations:
[ 43.402] (II) Solid
[ 43.402] (II) Copy
[ 43.402] (II) Composite (RENDER acceleration)
[ 43.402] (II) UploadToScreen
[ 43.402] (II) DownloadFromScreen
[ 43.402] (==) NOUVEAU(1): Backing store enabled
[ 43.402] (==) NOUVEAU(1): Silken mouse enabled
[ 43.403] (II) NOUVEAU(1): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 43.403] (II) NOUVEAU(1): [XvMC] Extension initialized.
[ 43.403] (**) NOUVEAU(1): DPMS enabled
[ 43.403] (II) Initializing extension Generic Event Extension
[ 43.403] (II) Initializing extension SHAPE
[ 43.404] (II) Initializing extension MIT-SHM
[ 43.404] (II) Initializing extension XInputExtension
[ 43.405] (II) Initializing extension XTEST
[ 43.405] (II) Initializing extension BIG-REQUESTS
[ 43.405] (II) Initializing extension SYNC
[ 43.406] (II) Initializing extension XKEYBOARD
[ 43.406] (II) Initializing extension XC-MISC
[ 43.406] (II) Initializing extension SECURITY
[ 43.407] (II) Initializing extension XFIXES
[ 43.407] (II) Initializing extension RENDER
[ 43.407] (II) Initializing extension RANDR
[ 43.407] (II) Initializing extension COMPOSITE
[ 43.408] (II) Initializing extension DAMAGE
[ 43.408] (II) Initializing extension MIT-SCREEN-SAVER
[ 43.408] (II) Initializing extension DOUBLE-BUFFER
[ 43.409] (II) Initializing extension RECORD
[ 43.409] (II) Initializing extension DPMS
[ 43.409] (II) Initializing extension Present
[ 43.409] (II) Initializing extension DRI3
[ 43.410] (II) Initializing extension X-Resource
[ 43.410] (II) Initializing extension XVideo
[ 43.410] (II) Initializing extension XVideo-MotionCompensation
[ 43.410] (II) Initializing extension GLX
[ 43.429] (II) AIGLX: Loaded and initialized crocus
[ 43.429] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 43.444] (II) AIGLX: Loaded and initialized nouveau
[ 43.444] (II) GLX: Initialized DRI2 GL provider for screen 1
[ 43.444] (II) Initializing extension XFree86-VidModeExtension
[ 43.444] (II) Initializing extension XFree86-DGA
[ 43.445] (II) Initializing extension XFree86-DRI
[ 43.445] (II) Initializing extension DRI2
[ 43.445] (II) modeset(0): Damage tracking initialized
[ 43.445] (II) modeset(0): Setting screen physical size to 508 x 285
[ 43.447] (II) NOUVEAU(1): NVEnterVT is called.
[ 43.675] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 43.675] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 43.675] (**) Power Button: Applying InputClass "system-keyboard"
[ 43.675] (II) LoadModule: "libinput"
[ 43.676] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 43.679] (II) Module libinput: vendor="X.Org Foundation"
[ 43.679] compiled for 1.21.1.7, module version = 1.2.1
[ 43.679] Module class: X.Org XInput Driver
[ 43.679] ABI class: X.Org XInput driver, version 24.4
[ 43.680] (II) Using input driver 'libinput' for 'Power Button'
[ 43.681] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 33 paused 0
[ 43.681] (**) Power Button: always reports core events
[ 43.681] (**) Option "Device" "/dev/input/event1"
[ 43.688] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 43.688] (II) event1 - Power Button: device is a keyboard
[ 43.688] (II) event1 - Power Button: device removed
[ 43.688] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 43.688] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 43.688] (**) Option "xkb_model" "pc105"
[ 43.688] (**) Option "xkb_layout" "fr"
[ 43.689] (**) Option "xkb_options" "compose:rwin"
[ 43.720] (II) event1 - Power Button: is tagged by udev as: Keyboard
[ 43.721] (II) event1 - Power Button: device is a keyboard
[ 43.722] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 43.722] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 43.722] (**) Power Button: Applying InputClass "system-keyboard"
[ 43.722] (II) Using input driver 'libinput' for 'Power Button'
[ 43.723] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 36 paused 0
[ 43.723] (**) Power Button: always reports core events
[ 43.723] (**) Option "Device" "/dev/input/event0"
[ 43.725] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 43.725] (II) event0 - Power Button: device is a keyboard
[ 43.726] (II) event0 - Power Button: device removed
[ 43.726] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[ 43.726] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 43.726] (**) Option "xkb_model" "pc105"
[ 43.726] (**) Option "xkb_layout" "fr"
[ 43.726] (**) Option "xkb_options" "compose:rwin"
[ 43.727] (II) event0 - Power Button: is tagged by udev as: Keyboard
[ 43.728] (II) event0 - Power Button: device is a keyboard
[ 43.732] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event2)
[ 43.732] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[ 43.732] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[ 43.733] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 37 paused 0
[ 43.733] (**) Logitech USB Optical Mouse: always reports core events
[ 43.733] (**) Option "Device" "/dev/input/event2"
[ 43.736] (II) event2 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 43.736] (II) event2 - Logitech USB Optical Mouse: device is a pointer
[ 43.737] (II) event2 - Logitech USB Optical Mouse: device removed
[ 43.737] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/0003:046D:C077.0001/input/input2/event2"
[ 43.737] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[ 43.738] (**) Option "AccelerationScheme" "none"
[ 43.738] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[ 43.738] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 43.738] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 43.740] (II) event2 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[ 43.741] (II) event2 - Logitech USB Optical Mouse: device is a pointer
[ 43.743] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 43.743] (II) No input driver specified, ignoring this device.
[ 43.743] (II) This device may have been added with another device file.
[ 43.744] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event3)
[ 43.744] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[ 43.744] (**) Logitech USB Keyboard: Applying InputClass "system-keyboard"
[ 43.744] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[ 43.746] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 38 paused 0
[ 43.746] (**) Logitech USB Keyboard: always reports core events
[ 43.746] (**) Option "Device" "/dev/input/event3"
[ 43.749] (II) event3 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 43.750] (II) event3 - Logitech USB Keyboard: device is a keyboard
[ 43.750] (II) event3 - Logitech USB Keyboard: device removed
[ 43.750] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.0/0003:046D:C31C.0002/input/input3/event3"
[ 43.750] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[ 43.750] (**) Option "xkb_model" "pc105"
[ 43.750] (**) Option "xkb_layout" "fr"
[ 43.750] (**) Option "xkb_options" "compose:rwin"
[ 43.755] (II) event3 - Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 43.755] (II) event3 - Logitech USB Keyboard: device is a keyboard
[ 43.757] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event4)
[ 43.757] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[ 43.757] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "system-keyboard"
[ 43.757] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[ 43.758] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 39 paused 0
[ 43.758] (**) Logitech USB Keyboard Consumer Control: always reports core events
[ 43.758] (**) Option "Device" "/dev/input/event4"
[ 43.762] (II) event4 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 43.762] (II) event4 - Logitech USB Keyboard Consumer Control: device is a keyboard
[ 43.763] (II) event4 - Logitech USB Keyboard Consumer Control: device removed
[ 43.763] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/0003:046D:C31C.0003/input/input4/event4"
[ 43.763] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 10)
[ 43.763] (**) Option "xkb_model" "pc105"
[ 43.763] (**) Option "xkb_layout" "fr"
[ 43.763] (**) Option "xkb_options" "compose:rwin"
[ 43.766] (II) event4 - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 43.766] (II) event4 - Logitech USB Keyboard Consumer Control: device is a keyboard
[ 43.768] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event5)
[ 43.768] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[ 43.768] (**) Logitech USB Keyboard System Control: Applying InputClass "system-keyboard"
[ 43.768] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[ 43.770] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 40 paused 0
[ 43.770] (**) Logitech USB Keyboard System Control: always reports core events
[ 43.770] (**) Option "Device" "/dev/input/event5"
[ 43.773] (II) event5 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[ 43.773] (II) event5 - Logitech USB Keyboard System Control: device is a keyboard
[ 43.773] (II) event5 - Logitech USB Keyboard System Control: device removed
[ 43.773] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.2/usb5/5-2/5-2:1.1/0003:046D:C31C.0003/input/input5/event5"
[ 43.773] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 11)
[ 43.773] (**) Option "xkb_model" "pc105"
[ 43.773] (**) Option "xkb_layout" "fr"
[ 43.773] (**) Option "xkb_options" "compose:rwin"
[ 43.776] (II) event5 - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[ 43.776] (II) event5 - Logitech USB Keyboard System Control: device is a keyboard
[ 43.777] (II) config/udev: Adding input device HDA Intel MID Line (/dev/input/event9)
[ 43.777] (II) No input driver specified, ignoring this device.
[ 43.777] (II) This device may have been added with another device file.
[ 43.778] (II) config/udev: Adding input device HDA Intel MID Line Out Front (/dev/input/event10)
[ 43.778] (II) No input driver specified, ignoring this device.
[ 43.778] (II) This device may have been added with another device file.
[ 43.779] (II) config/udev: Adding input device HDA Intel MID Line Out Surround (/dev/input/event11)
[ 43.779] (II) No input driver specified, ignoring this device.
[ 43.779] (II) This device may have been added with another device file.
[ 43.780] (II) config/udev: Adding input device HDA Intel MID Line Out CLFE (/dev/input/event12)
[ 43.780] (II) No input driver specified, ignoring this device.
[ 43.780] (II) This device may have been added with another device file.
[ 43.781] (II) config/udev: Adding input device HDA Intel MID Line Out Side (/dev/input/event13)
[ 43.781] (II) No input driver specified, ignoring this device.
[ 43.781] (II) This device may have been added with another device file.
[ 43.781] (II) config/udev: Adding input device HDA Intel MID Front Headphone (/dev/input/event14)
[ 43.782] (II) No input driver specified, ignoring this device.
[ 43.782] (II) This device may have been added with another device file.
[ 43.782] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event15)
[ 43.782] (II) No input driver specified, ignoring this device.
[ 43.782] (II) This device may have been added with another device file.
[ 43.783] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 43.783] (II) No input driver specified, ignoring this device.
[ 43.783] (II) This device may have been added with another device file.
[ 43.784] (II) config/udev: Adding input device HDA Intel MID Front Mic (/dev/input/event7)
[ 43.784] (II) No input driver specified, ignoring this device.
[ 43.784] (II) This device may have been added with another device file.
[ 43.785] (II) config/udev: Adding input device HDA Intel MID Rear Mic (/dev/input/event8)
[ 43.785] (II) No input driver specified, ignoring this device.
[ 43.785] (II) This device may have been added with another device file.
[ 44.830] (II) modeset(0): EDID vendor "MSI", prod id 12464
[ 44.830] (II) modeset(0): Using EDID range info for horizontal sync
[ 44.830] (II) modeset(0): Using EDID range info for vertical refresh
[ 44.830] (II) modeset(0): Printing DDC gathered Modelines:
[ 44.830] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 44.830] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 44.830] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 44.830] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 44.830] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 44.830] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 44.831] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 44.831] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 44.831] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 44.831] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 44.831] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 44.831] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 44.831] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 44.831] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 44.831] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 44.831] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 44.831] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 44.831] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 44.831] (II) modeset(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 44.831] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 44.831] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 44.831] (II) modeset(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 44.914] (II) modeset(0): EDID vendor "MSI", prod id 12464
[ 44.914] (II) modeset(0): Using hsync ranges from config file
[ 44.914] (II) modeset(0): Using vrefresh ranges from config file
[ 44.914] (II) modeset(0): Printing DDC gathered Modelines:
[ 44.914] (II) modeset(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 44.914] (II) modeset(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 44.914] (II) modeset(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
[ 44.914] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 44.914] (II) modeset(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz e)
[ 44.914] (II) modeset(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
[ 44.914] (II) modeset(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 44.914] (II) modeset(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 44.914] (II) modeset(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 44.914] (II) modeset(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 44.914] (II) modeset(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
[ 44.914] (II) modeset(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 44.914] (II) modeset(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 44.914] (II) modeset(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 44.914] (II) modeset(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
[ 44.914] (II) modeset(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 44.914] (II) modeset(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 44.914] (II) modeset(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 44.914] (II) modeset(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.8 kHz e)
[ 44.914] (II) modeset(0): Modeline "1440x900"x0.0 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 44.914] (II) modeset(0): Modeline "1680x1050"x0.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 44.914] (II) modeset(0): Modeline "1280x800"x0.0 83.50 1280 1352 1480 1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
Édité par domchab Le 07/02/2024 à 14h26
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
Ça devient compliqué de trouver une piste.
Édité par Papoteur Le 09/02/2024 à 10h38
nic80 Membre non connecté
-
- Voir le profil du membre nic80
- Inscrit le : 06/08/2018
- Groupes :
-
Modérateur
Si aucun des deux périphériques USB n' est branché, il n' y a aucun plantage ?
Comme se sont tous des périphériques USB, si plus rien ne répond, peut être est un problème au niveau du controlleur USB ?
Pour vérifier si c' est le controlleur usb qui plante, il faudrait lancer une konsole avec la commande en root "journalctl -f" ainsi même si le controlleur USB plante, cette fenêtre devrait continuer à afficher des choses. Si c' est le cas et que les périphériques USB ne répondent plus ( clavier/souris y compris), c' est que le problème pourrait venir du pilote du controlleur USB (notamment si plus aucune led ne s' allume sur le clavier si filaire).
Édité par nic80 Le 08/02/2024 à 23h15
domchab Membre non connecté
-
- Voir le profil du membre domchab
- Inscrit le : 07/07/2011
- Groupes :
J’ai le clavier et la souris branché en usb, mais eux ne me posent pas problème. Lorsque je branche un dongle wifi sur usb et que je vais chercher mon reseau wifi ou que je branche mon boitier Terratec DVB sur une chaine, j’ai au bout de quelques minutes l’écran qui se fige, le clavier bloqué avec la LED du numlock qui se fige dans l’état ou elle , pas de possibilité de basculer sur une autre instance (Ctrl alt F2 ou Ctrl alt F3 ne font rien) et bien sûr puisque l’écran est figé, un pointeur de souris bloqué à l’écran.
J’ai peur du coup que l’affichage d’un terminal ne se bloque aussi, mais j’essayerai ce soir.
Bonne journée
domchab Membre non connecté
-
- Voir le profil du membre domchab
- Inscrit le : 07/07/2011
- Groupes :
Du coup je suis retourné voir dans le bios comment était paramétré le contrôleur USB. C’est une carte Gigabyte H55M-USB3. J’ai 2 contrôleurs USB. 2 pour les USB « normaux » et un pour l’USB3. Du coup j’ai remis à la configuration par défaut le bios sur cette page. ça a désactivé les 2 contrôleur USB2 et gardé que l’USB3. Je redémarre et bien sûr les USB2 sont désactivé mais l’USB3 ne s’active que quand mageia se lance et je n’ai plus accès au bios au démarrage par la touche suppr car mon clavier est en usb et pas avec une PS2 et il vaudrait mieux que je fasse le contraire (désactiver usb3 et garder usb2 au vu du nombre de prises usb que j’ai.
Il faut que je trouve un convertisseur USB/PS2 pour pouvoir avancer et reacceder à mon bios.
Je pars une semaine et je verrai ça en rentrant. Je te tiendrai au courant en rentrant.
Merci de cette piste que je vais creuser
nic80 Membre non connecté
-
- Voir le profil du membre nic80
- Inscrit le : 06/08/2018
- Groupes :
-
Modérateur
Si ç' est une installation en uefi, l' option de grub d' accès au programme uefi permet de rentrer dedans (mais sans clavier cela risque d ' être compliqué pour faire quelque chose.
Si ce n' est pas disponible depuis le grub, je crois que systemd permet de forcer le démarrage dans l' uefi, mais je n' ai plus la commande en tête.
Edit: peut être "systemctl reboot --firmware-setup"
Édité par nic80 Le 09/02/2024 à 20h49
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie