Dernière mise à jour : écran tout noir sous plasma [Réglé]
alouali Membre non connecté
-
- Voir le profil du membre alouali
- Inscrit le : 15/02/2014
- Site internet
- Groupes :
depuis hier et la dernière mise à jour, l'écran est tout noir sous plasma, quelque soit l'utilisateur, et même en désactivant le compositeur.
Heureusement j'ai un bureau de dépannage Xfce.
Mon processeur est un Core i3-4330 et j'utilise sa carte graphique intégrée, donc le pilote libre intel.
Y-a-t'il une solution ? Faut-il patienter jsuqu'à la prochaine mise à jour ?
Merci !
vouf Membre non connecté
-
- Voir le profil du membre vouf
- Inscrit le : 16/08/2008
- Groupes :
a) Peut être une mise à jour imparfaite liée à un miroir qui ne serait pas à jour. Supprimer les dépôts actuels et les remplacer par des nouveaux.
Suppression des dépôts actuels.
Code BASH :
urpmi.removemedia -aAjout du dépôt free. Attention, le lien ci dessous est pour mageia 6 version 64 bits
Code BASH :
urpmi.addmedia --distrib http://ftp.free.fr/mirrors/mageia.org/distrib/6/x86_64
Forcer la mise à jour de la distrib
Code BASH :
urpmi --auto-updateb) Un problème d'espace disque ? Vérifie que les partitions / ou /home ou /tmp ne sont pas pleines..
Code BASH :
df -h
alouali Membre non connecté
-
- Voir le profil du membre alouali
- Inscrit le : 15/02/2014
- Site internet
- Groupes :
merci pour ta réponse, hélas je viens d'essayer les 3 commandes, ça ne change rien.
J'ai toujours fais mes mise à jour avec urpmi --auto-update et il n'y avais pas d'erreur signalée non plus la dernière fois.
Pour df, il me reste plus de 100Go de libre sur / et /home, et 3.9Go sur /tmp (tmpfs)
D'autant qu'en dehors de plasma5, xfce fonctionne.
Édité par alouali Le 13/01/2018 à 10h01
vouf Membre non connecté
-
- Voir le profil du membre vouf
- Inscrit le : 16/08/2008
- Groupes :
Tu peux par hasard nous donner le résultat de :
Code BASH :
journalctl -b -p err
Sinon, depuis ta session xfce, je te proposerai bien de réinitialiser ta session plasma
Code BASH :
rm -rf .config/plasma*
alouali Membre non connecté
-
- Voir le profil du membre alouali
- Inscrit le : 15/02/2014
- Site internet
- Groupes :
voici le résultat :
Code BASH :
journalctl -b -p err -- Logs begin at mer. 2017-08-16 19:04:04 CEST, end at sam. 2018-01-13 10:55:22 janv. 13 08:44:51 localhost kernel: xt_addrtype: ipv6 does not support BROADCAST janv. 13 09:19:02 localhost sSMTP[23264]: Unable to locate mail janv. 13 09:19:02 localhost sSMTP[23264]: Cannot open mail:25 janv. 13 09:19:02 localhost sSMTP[23322]: Unable to locate mail janv. 13 09:19:02 localhost sSMTP[23322]: Cannot open mail:25 janv. 13 09:19:02 localhost sSMTP[23359]: Unable to locate mail janv. 13 09:19:02 localhost sSMTP[23359]: Cannot open mail:25 janv. 13 09:19:02 localhost anacron[13143]: Tried to mail output of job `cron.da
Je ne souhaite pas détruire ma config plasma (j'ai des notes que je n'ai pas eu le temps de sauvegarder), par contre j'ai créé un nouvel utilisateur test vide, et l'écran est désespérément noir
vouf Membre non connecté
-
- Voir le profil du membre vouf
- Inscrit le : 16/08/2008
- Groupes :
Pas trop d'idées. Si tu bascule sur le précédent kernel en le sélectionnant au démarrage, rencontre tu le même problème ? Sinon, as tu un seul moniteur ou plusieurs moniteurs ?
alouali Membre non connecté
-
- Voir le profil du membre alouali
- Inscrit le : 15/02/2014
- Site internet
- Groupes :
oui j'ai redémarré avec les anciens kernels, ça n'a rien changé. Je pense que c'est les dernières mises à jour Qt / KDE.
J'ai un seul moniteur.
vouf Membre non connecté
-
- Voir le profil du membre vouf
- Inscrit le : 16/08/2008
- Groupes :
Peux tu nous communiquer les éléments de carte graphique :
Code BASH :
lspcidrake -v | grep Card
Le contenu du fichier suivant après que le problème se soit produit :
Code BASH :
cat /var/log/Xorg.0.log
Le contenu de ton fichier xorg.conf :
Code BASH :
cat /etc/X11/xorg.conf
alouali Membre non connecté
-
- Voir le profil du membre alouali
- Inscrit le : 15/02/2014
- Site internet
- Groupes :
alors voici les informations demandées :
Code BASH :
lspcidrake -v | grep Card Card:Intel 810 and later: Intel Corporation|Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [DISPLAY_VGA] (vendor:8086 device:0412 subv:1458 subd:d000) (rev: 06)
Code BASH :
cat /var/log/Xorg.0.log [ 11.619] (--) Log file renamed from "/var/log/Xorg.pid-1495.log" to "/var/log/Xorg.0.log" [ 11.619] X.Org X Server 1.19.5 Release Date: 2017-10-12 [ 11.619] X Protocol Version 11, Revision 0 [ 11.619] Build Operating System: ecosse 4.4.88-server-1.mga5 [ 11.619] Current Operating System: Linux localhost 4.14.13-desktop-1.mga6 #1 SMP Wed Jan 10 12:48:53 UTC 2018 x86_64 [ 11.619] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.13-desktop-1.mga6 root=UUID=7fd96cd9-d4a7-4732-8188-a33985b9b465 ro splash quiet noiswmd audit=0 [ 11.619] Build Date: 13 October 2017 04:36:29PM [ 11.619] Build ID: x11-server 1.19.5-1.1.mga6 [ 11.619] Current version of pixman: 0.34.0 [ 11.619] Before reporting problems, check https://bugs.mageia.org to make sure that you have the latest version. [ 11.619] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 11.620] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 13 18:03:02 2018 [ 11.620] (==) Using config file: "/etc/X11/xorg.conf" [ 11.620] (==) Using config directory: "/etc/X11/xorg.conf.d" [ 11.620] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 11.621] (==) ServerLayout "layout1" [ 11.621] (**) |-->Screen "screen1" (0) [ 11.621] (**) | |-->Monitor "monitor1" [ 11.621] (**) | |-->Device "device1" [ 11.621] (**) Option "DontZap" "False" [ 11.621] (**) Option "AllowMouseOpenFail" [ 11.621] (==) Automatically adding devices [ 11.621] (==) Automatically enabling devices [ 11.621] (==) Automatically adding GPU devices [ 11.621] (==) Automatically binding GPU devices [ 11.621] (==) Max clients allowed: 256, resource mask: 0x1fffff [ 11.621] (==) FontPath set to: catalogue:/etc/X11/fontpath.d, built-ins [ 11.621] (**) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules" [ 11.622] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 11.622] (II) Loader magic: 0x80ed80 [ 11.622] (II) Module ABI versions: [ 11.622] X.Org ANSI C Emulation: 0.4 [ 11.622] X.Org Video Driver: 23.0 [ 11.622] X.Org XInput driver : 24.1 [ 11.622] X.Org Server Extension : 10.0 [ 11.622] (++) using VT number 1 [ 11.622] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration [ 11.623] (II) xfree86: Adding drm device (/dev/dri/card0) [ 11.632] (--) PCI:*(0:0:2:0) 8086:0412:1458:d000 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072 [ 11.632] (II) Open ACPI successful (/var/run/acpid.socket) [ 11.632] (II) "glx" will be loaded by default. [ 11.632] (II) LoadModule: "v4l" [ 11.633] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so [ 11.633] (II) Module v4l: vendor="X.Org Foundation" [ 11.633] compiled for 1.19.2, module version = 0.1.1 [ 11.633] ABI class: X.Org Video Driver, version 23.0 [ 11.633] (II) LoadModule: "glx" [ 11.634] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so [ 11.642] (II) Module glx: vendor="X.Org Foundation" [ 11.642] compiled for 1.19.5, module version = 1.0.0 [ 11.642] ABI class: X.Org Server Extension, version 10.0 [ 11.642] (II) LoadModule: "intel" [ 11.643] (II) Loading /usr/lib64/xorg/modules/drivers/intel-common/intel_drv.so [ 11.645] (II) Module intel: vendor="X.Org Foundation" [ 11.645] compiled for 1.19.5, module version = 2.99.917 [ 11.645] Module class: X.Org Video Driver [ 11.645] ABI class: X.Org Video Driver, version 23.0 [ 11.645] (II) v4l driver for Video4Linux overlay mode (V4L2) [ 11.645] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets: i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45, 4 Series, G45/G43, Q45/Q43, G41, B43 [ 11.645] (II) intel: Driver for Intel(R) HD Graphics [ 11.645] (II) intel: Driver for Intel(R) Iris(TM) Graphics [ 11.645] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics [ 11.645] (WW) Falling back to old probe method for v4l [ 11.645] (II) v4l: Initiating device probe [ 11.646] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20170818 [ 11.658] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600 [ 11.658] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads [ 11.658] (**) intel(0): Depth 24, (--) framebuffer bpp 32 [ 11.658] (==) intel(0): RGB weight 888 [ 11.658] (==) intel(0): Default visual is TrueColor [ 11.659] (II) intel(0): Output VGA1 using monitor section monitor1 [ 11.659] (II) intel(0): Enabled output VGA1 [ 11.659] (II) intel(0): Output HDMI1 has no monitor section [ 11.659] (II) intel(0): Enabled output HDMI1 [ 11.659] (II) intel(0): Output HDMI2 has no monitor section [ 11.659] (II) intel(0): Enabled output HDMI2 [ 11.659] (--) intel(0): Using a maximum size of 256x256 for hardware cursors [ 11.659] (II) intel(0): Output VIRTUAL1 has no monitor section [ 11.659] (II) intel(0): Enabled output VIRTUAL1 [ 11.659] (--) intel(0): Output HDMI1 using initial mode 1280x1024 on pipe 0 [ 11.659] (==) intel(0): TearFree disabled [ 11.659] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0) [ 11.659] (==) intel(0): DPI set to (96, 96) [ 11.659] (II) Loading sub module "dri3" [ 11.659] (II) LoadModule: "dri3" [ 11.659] (II) Module "dri3" already built-in [ 11.659] (II) Loading sub module "dri2" [ 11.659] (II) LoadModule: "dri2" [ 11.659] (II) Module "dri2" already built-in [ 11.659] (II) Loading sub module "present" [ 11.659] (II) LoadModule: "present" [ 11.659] (II) Module "present" already built-in [ 11.659] (==) Depth 24 pixmap format is 32 bpp [ 11.661] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend [ 11.661] (==) intel(0): Backing store enabled [ 11.661] (==) intel(0): Silken mouse enabled [ 11.662] (II) intel(0): HW Cursor enabled [ 11.662] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message. [ 11.662] (**) intel(0): DPMS enabled [ 11.662] (==) intel(0): Display hotplug detection enabled [ 11.662] (II) v4l: init done, 0 device(s) found [ 11.662] (II) intel(0): [DRI2] Setup complete [ 11.662] (II) intel(0): [DRI2] DRI driver: i965 [ 11.662] (II) intel(0): [DRI2] VDPAU driver: va_gl [ 11.662] (II) intel(0): direct rendering: DRI2 enabled [ 11.662] (II) intel(0): hardware support for Present enabled [ 11.662] (--) RandR disabled [ 11.681] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer [ 11.681] (II) AIGLX: enabled GLX_ARB_create_context [ 11.681] (II) AIGLX: enabled GLX_ARB_create_context_profile [ 11.681] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile [ 11.681] (II) AIGLX: enabled GLX_INTEL_swap_event [ 11.681] (II) AIGLX: enabled GLX_SGI_swap_control [ 11.681] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB [ 11.681] (II) AIGLX: enabled GLX_ARB_fbconfig_float [ 11.681] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float [ 11.681] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects [ 11.681] (II) AIGLX: enabled GLX_ARB_create_context_robustness [ 11.681] (II) AIGLX: Loaded and initialized i965 [ 11.681] (II) GLX: Initialized DRI2 GL provider for screen 0 [ 11.683] (II) intel(0): switch to mode 1280x1024@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none [ 11.697] (II) intel(0): Setting screen physical size to 338 x 270 [ 11.734] (II) config/udev: Adding input device Power Button (/dev/input/event1) [ 11.734] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 11.734] (**) Power Button: Applying InputClass "system-keyboard" [ 11.734] (II) LoadModule: "libinput" [ 11.735] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so [ 11.737] (II) Module libinput: vendor="X.Org Foundation" [ 11.737] compiled for 1.19.3, module version = 0.25.1 [ 11.737] Module class: X.Org XInput Driver [ 11.737] ABI class: X.Org XInput driver, version 24.1 [ 11.737] (II) Using input driver 'libinput' for 'Power Button' [ 11.737] (**) Power Button: always reports core events [ 11.737] (**) Option "Device" "/dev/input/event1" [ 11.738] (**) Option "_source" "server/udev" [ 11.738] (II) event1 - (II) Power Button: (II) is tagged by udev as: Keyboard [ 11.738] (II) event1 - (II) Power Button: (II) device is a keyboard [ 11.738] (II) event1 - (II) Power Button: (II) device removed [ 11.747] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1" [ 11.747] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6) [ 11.747] (**) Option "xkb_model" "pc105" [ 11.747] (**) Option "xkb_layout" "fr" [ 11.747] (**) Option "xkb_options" "compose:rwin" [ 11.759] (II) event1 - (II) Power Button: (II) is tagged by udev as: Keyboard [ 11.759] (II) event1 - (II) Power Button: (II) device is a keyboard [ 11.759] (II) config/udev: Adding input device Video Bus (/dev/input/event2) [ 11.759] (**) Video Bus: Applying InputClass "libinput keyboard catchall" [ 11.759] (**) Video Bus: Applying InputClass "system-keyboard" [ 11.759] (II) Using input driver 'libinput' for 'Video Bus' [ 11.759] (**) Video Bus: always reports core events [ 11.759] (**) Option "Device" "/dev/input/event2" [ 11.759] (**) Option "_source" "server/udev" [ 11.760] (II) event2 - (II) Video Bus: (II) is tagged by udev as: Keyboard [ 11.760] (II) event2 - (II) Video Bus: (II) device is a keyboard [ 11.760] (II) event2 - (II) Video Bus: (II) device removed [ 11.767] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2" [ 11.767] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7) [ 11.767] (**) Option "xkb_model" "pc105" [ 11.767] (**) Option "xkb_layout" "fr" [ 11.767] (**) Option "xkb_options" "compose:rwin" [ 11.767] (II) event2 - (II) Video Bus: (II) is tagged by udev as: Keyboard [ 11.767] (II) event2 - (II) Video Bus: (II) device is a keyboard [ 11.767] (II) config/udev: Adding input device Power Button (/dev/input/event0) [ 11.767] (**) Power Button: Applying InputClass "libinput keyboard catchall" [ 11.767] (**) Power Button: Applying InputClass "system-keyboard" [ 11.767] (II) Using input driver 'libinput' for 'Power Button' [ 11.767] (**) Power Button: always reports core events [ 11.767] (**) Option "Device" "/dev/input/event0" [ 11.767] (**) Option "_source" "server/udev" [ 11.767] (II) event0 - (II) Power Button: (II) is tagged by udev as: Keyboard [ 11.767] (II) event0 - (II) Power Button: (II) device is a keyboard [ 11.767] (II) event0 - (II) Power Button: (II) device removed [ 11.773] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0" [ 11.773] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8) [ 11.773] (**) Option "xkb_model" "pc105" [ 11.773] (**) Option "xkb_layout" "fr" [ 11.773] (**) Option "xkb_options" "compose:rwin" [ 11.773] (II) event0 - (II) Power Button: (II) is tagged by udev as: Keyboard [ 11.773] (II) event0 - (II) Power Button: (II) device is a keyboard [ 11.773] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event3) [ 11.773] (II) No input driver specified, ignoring this device. [ 11.773] (II) This device may have been added with another device file. [ 11.773] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event4) [ 11.773] (II) No input driver specified, ignoring this device. [ 11.773] (II) This device may have been added with another device file. [ 11.773] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event5) [ 11.773] (II) No input driver specified, ignoring this device. [ 11.774] (II) This device may have been added with another device file. [ 11.774] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event6) [ 11.774] (II) No input driver specified, ignoring this device. [ 11.774] (II) This device may have been added with another device file. [ 11.774] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event7) [ 11.774] (II) No input driver specified, ignoring this device. [ 11.774] (II) This device may have been added with another device file. [ 11.774] (II) config/udev: Adding input device THRUSTMASTER Top Gun Fox 2 Pro (/dev/input/event19) [ 11.774] (II) No input driver specified, ignoring this device. [ 11.774] (II) This device may have been added with another device file. [ 11.774] (II) config/udev: Adding input device THRUSTMASTER Top Gun Fox 2 Pro (/dev/input/js0) [ 11.774] (II) No input driver specified, ignoring this device. [ 11.774] (II) This device may have been added with another device file. [ 11.775] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event17) [ 11.775] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall" [ 11.775] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 11.775] (**) Logitech USB Receiver: always reports core events [ 11.775] (**) Option "Device" "/dev/input/event17" [ 11.775] (**) Option "_source" "server/udev" [ 11.775] (II) event17 - (II) Logitech USB Receiver: (II) is tagged by udev as: Mouse [ 11.775] (II) event17 - (II) Logitech USB Receiver: (II) device is a pointer [ 11.775] (II) event17 - (II) Logitech USB Receiver: (II) device removed [ 11.787] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046D:C52F.0001/input/input17/event17" [ 11.787] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9) [ 11.787] (**) Option "AccelerationScheme" "none" [ 11.787] (**) Logitech USB Receiver: (accel) selected scheme none/0 [ 11.787] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 11.787] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 11.788] (II) event17 - (II) Logitech USB Receiver: (II) is tagged by udev as: Mouse [ 11.788] (II) event17 - (II) Logitech USB Receiver: (II) device is a pointer [ 11.788] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0) [ 11.788] (II) No input driver specified, ignoring this device. [ 11.788] (II) This device may have been added with another device file. [ 11.789] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event18) [ 11.789] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall" [ 11.789] (**) Logitech USB Receiver: Applying InputClass "system-keyboard" [ 11.789] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 11.789] (**) Logitech USB Receiver: always reports core events [ 11.789] (**) Option "Device" "/dev/input/event18" [ 11.789] (**) Option "_source" "server/udev" [ 11.789] (II) event18 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard [ 11.789] (II) event18 - (II) Logitech USB Receiver: (II) device is a keyboard [ 11.789] (II) event18 - (II) Logitech USB Receiver: (II) device removed [ 11.798] (II) libinput: Logitech USB Receiver: needs a virtual subdevice [ 11.798] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C52F.0002/input/input18/event18" [ 11.798] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10) [ 11.798] (**) Option "AccelerationScheme" "none" [ 11.798] (**) Logitech USB Receiver: (accel) selected scheme none/0 [ 11.798] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000 [ 11.798] (**) Logitech USB Receiver: (accel) acceleration threshold: 4 [ 11.798] (II) event18 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard [ 11.798] (II) event18 - (II) Logitech USB Receiver: (II) device is a keyboard [ 11.798] (II) config/udev: Adding input device Logitech K270 (/dev/input/event21) [ 11.798] (**) Logitech K270: Applying InputClass "libinput keyboard catchall" [ 11.798] (**) Logitech K270: Applying InputClass "system-keyboard" [ 11.798] (II) Using input driver 'libinput' for 'Logitech K270' [ 11.798] (**) Logitech K270: always reports core events [ 11.798] (**) Option "Device" "/dev/input/event21" [ 11.798] (**) Option "_source" "server/udev" [ 11.799] (II) event21 - (II) Logitech K270: (II) is tagged by udev as: Keyboard [ 11.799] (II) event21 - (II) Logitech K270: (II) device is a keyboard [ 11.799] (II) event21 - (II) Logitech K270: (II) device removed [ 11.810] (II) libinput: Logitech K270: needs a virtual subdevice [ 11.810] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:046D:C52B.0005/0003:046D:4003.0008/input/input21/event21" [ 11.810] (II) XINPUT: Adding extended input device "Logitech K270" (type: MOUSE, id 11) [ 11.810] (**) Option "AccelerationScheme" "none" [ 11.810] (**) Logitech K270: (accel) selected scheme none/0 [ 11.810] (**) Logitech K270: (accel) acceleration factor: 2.000 [ 11.810] (**) Logitech K270: (accel) acceleration threshold: 4 [ 11.810] (II) event21 - (II) Logitech K270: (II) is tagged by udev as: Keyboard [ 11.810] (II) event21 - (II) Logitech K270: (II) device is a keyboard [ 11.810] (II) config/udev: Adding input device Logitech M185 (/dev/input/event20) [ 11.810] (**) Logitech M185: Applying InputClass "libinput pointer catchall" [ 11.810] (II) Using input driver 'libinput' for 'Logitech M185' [ 11.810] (**) Logitech M185: always reports core events [ 11.810] (**) Option "Device" "/dev/input/event20" [ 11.810] (**) Option "_source" "server/udev" [ 11.811] (II) event20 - (II) Logitech M185: (II) is tagged by udev as: Mouse [ 11.811] (II) event20 - (II) Logitech M185: (II) device set to 800 DPI [ 11.811] (II) event20 - (II) Logitech M185: (II) device is a pointer [ 11.811] (II) event20 - (II) Logitech M185: (II) device removed [ 11.825] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:046D:C52B.0005/0003:046D:4008.0007/input/input20/event20" [ 11.825] (II) XINPUT: Adding extended input device "Logitech M185" (type: MOUSE, id 12) [ 11.825] (**) Option "AccelerationScheme" "none" [ 11.825] (**) Logitech M185: (accel) selected scheme none/0 [ 11.825] (**) Logitech M185: (accel) acceleration factor: 2.000 [ 11.825] (**) Logitech M185: (accel) acceleration threshold: 4 [ 11.825] (II) event20 - (II) Logitech M185: (II) is tagged by udev as: Mouse [ 11.825] (II) event20 - (II) Logitech M185: (II) device set to 800 DPI [ 11.825] (II) event20 - (II) Logitech M185: (II) device is a pointer [ 11.825] (II) config/udev: Adding input device Logitech M185 (/dev/input/mouse1) [ 11.825] (II) No input driver specified, ignoring this device. [ 11.825] (II) This device may have been added with another device file. [ 11.826] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10) [ 11.826] (II) No input driver specified, ignoring this device. [ 11.826] (II) This device may have been added with another device file. [ 11.826] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11) [ 11.826] (II) No input driver specified, ignoring this device. [ 11.826] (II) This device may have been added with another device file. [ 11.827] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event12) [ 11.827] (II) No input driver specified, ignoring this device. [ 11.827] (II) This device may have been added with another device file. [ 11.827] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event13) [ 11.827] (II) No input driver specified, ignoring this device. [ 11.827] (II) This device may have been added with another device file. [ 11.827] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event14) [ 11.827] (II) No input driver specified, ignoring this device. [ 11.827] (II) This device may have been added with another device file. [ 11.827] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event15) [ 11.827] (II) No input driver specified, ignoring this device. [ 11.827] (II) This device may have been added with another device file. [ 11.828] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16) [ 11.828] (II) No input driver specified, ignoring this device. [ 11.828] (II) This device may have been added with another device file. [ 11.828] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8) [ 11.828] (II) No input driver specified, ignoring this device. [ 11.828] (II) This device may have been added with another device file. [ 11.828] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9) [ 11.828] (II) No input driver specified, ignoring this device. [ 11.828] (II) This device may have been added with another device file. [ 11.848] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall" [ 11.848] (**) Logitech USB Receiver: Applying InputClass "system-keyboard" [ 11.848] (II) Using input driver 'libinput' for 'Logitech USB Receiver' [ 11.848] (**) Logitech USB Receiver: always reports core events [ 11.848] (**) Option "Device" "/dev/input/event18" [ 11.848] (**) Option "_source" "_driver/libinput" [ 11.848] (II) libinput: Logitech USB Receiver: is a virtual subdevice [ 11.848] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C52F.0002/input/input18/event18" [ 11.848] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13) [ 11.848] (**) Option "xkb_model" "pc105" [ 11.848] (**) Option "xkb_layout" "fr" [ 11.848] (**) Option "xkb_options" "compose:rwin" [ 11.848] (**) Logitech K270: Applying InputClass "libinput keyboard catchall" [ 11.848] (**) Logitech K270: Applying InputClass "system-keyboard" [ 11.848] (II) Using input driver 'libinput' for 'Logitech K270' [ 11.848] (**) Logitech K270: always reports core events [ 11.848] (**) Option "Device" "/dev/input/event21" [ 11.848] (**) Option "_source" "_driver/libinput" [ 11.848] (II) libinput: Logitech K270: is a virtual subdevice [ 11.848] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:046D:C52B.0005/0003:046D:4003.0008/input/input21/event21" [ 11.848] (II) XINPUT: Adding extended input device "Logitech K270" (type: KEYBOARD, id 14) [ 11.848] (**) Option "xkb_model" "pc105" [ 11.848] (**) Option "xkb_layout" "fr" [ 11.848] (**) Option "xkb_options" "compose:rwin" [ 13.701] (II) intel(0): EDID vendor "GSM", prod id 19268 [ 13.701] (II) intel(0): Using hsync ranges from config file [ 13.701] (II) intel(0): Using vrefresh ranges from config file [ 13.701] (II) intel(0): Printing DDC gathered Modelines: [ 13.701] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP) [ 13.701] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e) [ 13.701] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e) [ 13.701] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e) [ 13.701] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e) [ 13.701] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz e) [ 13.701] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e) [ 13.701] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e) [ 13.701] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e) [ 13.701] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e) [ 338.957] (II) event1 - (II) Power Button: (II) device removed [ 338.963] (II) event2 - (II) Video Bus: (II) device removed [ 338.971] (II) event0 - (II) Power Button: (II) device removed [ 338.983] (II) event17 - (II) Logitech USB Receiver: (II) device removed [ 338.999] (II) event20 - (II) Logitech M185: (II) device removed [ 339.015] (II) event18 - (II) Logitech USB Receiver: (II) device removed [ 339.023] (II) event21 - (II) Logitech K270: (II) device removed [ 339.031] (II) AIGLX: Suspending AIGLX clients for VT switch [ 370.763] (II) Open ACPI successful (/var/run/acpid.socket) [ 370.763] (II) AIGLX: Resuming AIGLX clients after VT switch [ 370.763] (II) intel(0): switch to mode 1280x1024@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none [ 370.847] (II) event1 - (II) Power Button: (II) is tagged by udev as: Keyboard [ 370.847] (II) event1 - (II) Power Button: (II) device is a keyboard [ 370.847] (II) event2 - (II) Video Bus: (II) is tagged by udev as: Keyboard [ 370.847] (II) event2 - (II) Video Bus: (II) device is a keyboard [ 370.847] (II) event0 - (II) Power Button: (II) is tagged by udev as: Keyboard [ 370.847] (II) event0 - (II) Power Button: (II) device is a keyboard [ 370.900] (II) event17 - (II) Logitech USB Receiver: (II) is tagged by udev as: Mouse [ 370.900] (II) event17 - (II) Logitech USB Receiver: (II) device is a pointer [ 370.900] (II) event18 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard [ 370.900] (II) event18 - (II) Logitech USB Receiver: (II) device is a keyboard [ 370.900] (II) event21 - (II) Logitech K270: (II) is tagged by udev as: Keyboard [ 370.900] (II) event21 - (II) Logitech K270: (II) device is a keyboard [ 370.901] (II) event20 - (II) Logitech M185: (II) is tagged by udev as: Mouse [ 370.901] (II) event20 - (II) Logitech M185: (II) device set to 800 DPI [ 370.901] (II) event20 - (II) Logitech M185: (II) device is a pointer
Code BASH :
cat /etc/X11/xorg.conf # File generated by XFdrake (rev 262502) # ********************************************************************** # Refer to the xorg.conf man page for details about the format of # this file. # ********************************************************************** Section "ServerFlags" AllowMouseOpenFail # allows the server to start up even if the mouse does not work Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort) #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching) EndSection Section "Module" Load "v4l" # Video for Linux EndSection Section "Monitor" Identifier "monitor1" VendorName "Plug'n Play" ModelName "L1953TR " HorizSync 30-71 VertRefresh 56-75 # Apple iMac modes ModeLine "1024x768" 78.525 1024 1049 1145 1312 768 769 772 800 +hsync +vsync ModeLine "800x600" 62.357 800 821 901 1040 600 601 604 632 +hsync +vsync ModeLine "640x480" 49.886 640 661 725 832 480 481 484 514 +hsync +vsync # Apple monitors tend to do 832x624 ModeLine "832x624" 57 832 876 940 1152 624 625 628 667 -hsync -vsync # Apple PowerBook G3 ModeLine "800x600" 100 800 816 824 840 600 616 624 640 -hsync -vsync # Apple TI Powerbook ModeLine "1152x768" 78.741 1152 1173 1269 1440 768 769 772 800 +vsync +vsync # Pismo Firewire G3 ModeLine "1024x768" 65 1024 1032 1176 1344 768 771 777 806 -hsync -vsync # iBook2 ModeLine "1024x768" 65 1024 1048 1184 1344 768 771 777 806 -hsync -vsync # 17" Apple Studio Display ModeLine "1024x768" 112.62 1024 1076 1248 1420 768 768 780 808 +hsync +vsync # HiRes Apple Studio Display ModeLine "1280x1024" 135 1280 1288 1392 1664 1024 1027 1030 1064 # Another variation ModeLine "1280x1024" 134.989 1280 1317 1429 1688 1024 1025 1028 1066 +hsync +vsync # TV fullscreen mode or DVD fullscreen output. # 768x576 @ 79 Hz, 50 kHz hsync ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630 # 768x576 @ 100 Hz, 61.6 kHz hsync ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616 EndSection Section "Device" Identifier "device1" VendorName "Intel Corporation" BoardName "Intel 810 and later" Driver "intel" Option "DPMS" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" DefaultColorDepth 24 Subsection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240" EndSubsection Subsection "Display" Depth 15 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240" EndSubsection Subsection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240" EndSubsection Subsection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240" EndSubsection EndSection Section "ServerLayout" Identifier "layout1" Screen "screen1" EndSection
Légère différence : en me logant en plasma5 sur un autre compte, j'ai eu cette fois une image pendant une à deux secondes avant que tout ne redevienne noir.
Merci de ton aide
vouf Membre non connecté
-
- Voir le profil du membre vouf
- Inscrit le : 16/08/2008
- Groupes :
J'ai trouvé ce bug . On verra si cela peut apporter une solution à ton problème.
Il faut modifier ton fichier /etc/X11/xorg.conf pour activer l'acceleration uxa. Au niveau de la section device, tu as :
Code TEXT :
Section "Device"
Identifier "device1"
VendorName "Intel Corporation"
BoardName "Intel 810 and later"
Driver "intel"
Option "DPMS"
EndSectionChange là pour avoir
Code TEXT :
Section "Device"
Identifier "device1"
VendorName "Intel Corporation"
BoardName "Intel 810 and later"
Driver "intel"
Option "AccelMethod" "uxa"
Option "DPMS"
EndSectionPuis redémarre ta machine
alouali Membre non connecté
-
- Voir le profil du membre alouali
- Inscrit le : 15/02/2014
- Site internet
- Groupes :
je viens d'essayer, sans succès :-( Plasma 5 toujours tout noir, sur un ancien compte ou sur un nouveau compte vide, Xfce qui fonctionne...
alouali Membre non connecté
-
- Voir le profil du membre alouali
- Inscrit le : 15/02/2014
- Site internet
- Groupes :
vouf Membre non connecté
-
- Voir le profil du membre vouf
- Inscrit le : 16/08/2008
- Groupes :
J'ai également vu qu'en supprimant le répertoire .cache du compte cela pouvait résoudre certains problèmes :
Code BASH :
rm -fr ~/.cache
Maintenant, vu que le problème est également constaté sur un compte vierge, je doute que cette technique résolve ton soucis... Je ne vois pas d'erreur au niveau de la configuration de la partie graphique. D'ailleurs, on ne voit pas d'erreur au niveau des logs..
La seule piste valable, est effectivement un soucis avec plasma... Peut être :
Code BASH :
urpme task-plasma5
puis
Code BASH :
urpmi task-plasma5
Sinon, peut être envisager une réinstallation.....
Ami age Membre non connecté
-
- Voir le profil du membre Ami age
- Inscrit le : 18/08/2012
- Site internet
- Groupes :
-
Modérateur
se connecter en admin avec la commande su
taper son mot de passe root
lancer la commande XFdrake
puis essayer le pilote libre intel (les pilotes libres sont au bas dans la seconde partie de liste dans le groupe XORG(et les proprio au début groupe VENDOR))
redémarrer
si cela ne marche pas,
essayer le pilote vesa
j'ai été dans la même situation avec mon APU AMD A9700E
et ces manips mon permis de reprendre la main avec l'interace graphique, avec le pilote vesa
puis lancer toutes les mises à jours,
et j'ai pu remettre le pilote propriétaire ensuite
Édité par Ami age Le 14/01/2018 à 10h11
_______________________________________________________________________ 
___________________________________ Un petit clic pour Mageia ? =>> CLIQUEZ I C I :
.
___________________________________ Un petit clic pour Mageia ? =>> CLIQUEZ I C I :
.
alouali Membre non connecté
-
- Voir le profil du membre alouali
- Inscrit le : 15/02/2014
- Site internet
- Groupes :
c'est la cata !
rm -rf .cache et urpme / urpmi task-plasma5 n'ont rien changé.
Par contre le fait d'essayer un autre pilote (intel libre puis vesa) m'a fait perdre le menu grub ! (GRUB minimal BASH...).
Heureusement en bootant avec ma clé live, j'ai pu remettre l'ancien xorg.conf, redémarrer et refaire un update-grub2.
Malheureusement depuis mon compte ne marche plus : refus de connexion même sous Xfce (quelques secondes puis revient sur l'écran de log, sans message d'erreur). Par contre je peux toujours me logger en console. Les autres utilisateurs eux par contre fonctionnent encore.
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie