FAILED to start Software RAID monitoring and management. [Réglé]
systemctl status mdmonitor.service -l
Système et matériels / Installation et configuration

dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
Depuis le blocage du PC par l'importance de /var/log, je surveille ce qu'il produit.
Dans "boot.log", j'ai une erreur :
Starting Network Service...
Starting System Logging Service...
Starting ip6tables Firewall for IPv6...
Starting iptables Firewall for IPv4...
1;31mFAILED[0m] Failed to start Software RAID monitoring and management.
See "systemctl status mdmonitor.service" for details..
Je m'exécute et obtiens :
Caché :
systemctl status mdmonitor.service -l
● mdmonitor.service - Software RAID monitoring and management
Loaded: loaded (/usr/lib/systemd/system/mdmonitor.service; enabled)
Active: failed (Result: exit-code) since ven. 2016-08-12 11:25:01 CEST; 8min ago
Process: 788 ExecStart=/usr/sbin/mdadm --monitor --scan -f --pid-file=/run/mdadm/mdadm.pid (code=exited, status=1/FAILURE)
août 12 11:24:59 localhost.localdomain mdadm[788]: mdadm: No mail address or alert command - not monitoring.
août 12 11:25:01 localhost.localdomain systemd[1]: mdmonitor.service: control process exited, code=exited status=1
août 12 11:25:01 localhost.localdomain systemd[1]: Failed to start Software RAID monitoring and management.
août 12 11:25:01 localhost.localdomain systemd[1]: Unit mdmonitor.service entered failed state.
août 12 11:25:01 localhost.localdomain systemd[1]: mdmonitor.service failed.
● mdmonitor.service - Software RAID monitoring and management
Loaded: loaded (/usr/lib/systemd/system/mdmonitor.service; enabled)
Active: failed (Result: exit-code) since ven. 2016-08-12 11:25:01 CEST; 8min ago
Process: 788 ExecStart=/usr/sbin/mdadm --monitor --scan -f --pid-file=/run/mdadm/mdadm.pid (code=exited, status=1/FAILURE)
août 12 11:24:59 localhost.localdomain mdadm[788]: mdadm: No mail address or alert command - not monitoring.
août 12 11:25:01 localhost.localdomain systemd[1]: mdmonitor.service: control process exited, code=exited status=1
août 12 11:25:01 localhost.localdomain systemd[1]: Failed to start Software RAID monitoring and management.
août 12 11:25:01 localhost.localdomain systemd[1]: Unit mdmonitor.service entered failed state.
août 12 11:25:01 localhost.localdomain systemd[1]: mdmonitor.service failed.
Que dois-je faire ? J'ai souvent des messages d'erreur "IPV4" ou plus encore "IPV6". Comment les résoudre ?
Merci de vos conseils.
Édité par dantou Le 12/08/2016 à 11h47
Portable : ASUS Vivobook 15 Pro OLED - 16 G° RAM - SSD Crucial MX500 1 T° - Dual-boot W 10 / Mageia 9 64 bits
PC : be Quiet ! Silent Base 600 - Intel Core I5 12400 - Vent.: be quiet! Shadow Rock 3 + be quiet! LGA1700 mounting-kit - CM: Asus ROG Strix B660-F Gaming WIFI - RAM : Crucial 16GB DDR5-4800 CL40 - SSD: Crucial P5 500GB SSD M.2 2280 PCIe NVMe HDD: Western Digital WD Red Plus 3.5" 4To Série ATA - Alim : be quiet! Pure Power 11 FM 750W - Souris: Logitech MX Anywhere 3. Dual-boot W 10 / Mageia 9 - 64 bits
NAS : Synology DS 215J - DSM 5.2 - WD Red 3.5" 8 T° Série ATA
KDE - Digikam
PC : be Quiet ! Silent Base 600 - Intel Core I5 12400 - Vent.: be quiet! Shadow Rock 3 + be quiet! LGA1700 mounting-kit - CM: Asus ROG Strix B660-F Gaming WIFI - RAM : Crucial 16GB DDR5-4800 CL40 - SSD: Crucial P5 500GB SSD M.2 2280 PCIe NVMe HDD: Western Digital WD Red Plus 3.5" 4To Série ATA - Alim : be quiet! Pure Power 11 FM 750W - Souris: Logitech MX Anywhere 3. Dual-boot W 10 / Mageia 9 - 64 bits
NAS : Synology DS 215J - DSM 5.2 - WD Red 3.5" 8 T° Série ATA
KDE - Digikam

dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
J'ai un PC avec 2 DD, un portable et un NAS avec 1 DD qui stocke mes photos. Un réseau NFS nous permet d'accéder à tous les autres DD. (enfin, c'est la théorie et ce à quoi je veux arriver, car les accès ne veulent pas se laisser faire. Je dois batailler sans cesse pour les maintenir, alors qu'au départ tout allait bien. Mais mon "/" a été bloqué par "/var/log" qui a prit toute la place. Avant que je comprenne, j'ai modifié et supprimé un peu en aveugle, notamment les accès réseaux, car je redoutais un "ver/virus/hackage ...".
Portable : ASUS Vivobook 15 Pro OLED - 16 G° RAM - SSD Crucial MX500 1 T° - Dual-boot W 10 / Mageia 9 64 bits
PC : be Quiet ! Silent Base 600 - Intel Core I5 12400 - Vent.: be quiet! Shadow Rock 3 + be quiet! LGA1700 mounting-kit - CM: Asus ROG Strix B660-F Gaming WIFI - RAM : Crucial 16GB DDR5-4800 CL40 - SSD: Crucial P5 500GB SSD M.2 2280 PCIe NVMe HDD: Western Digital WD Red Plus 3.5" 4To Série ATA - Alim : be quiet! Pure Power 11 FM 750W - Souris: Logitech MX Anywhere 3. Dual-boot W 10 / Mageia 9 - 64 bits
NAS : Synology DS 215J - DSM 5.2 - WD Red 3.5" 8 T° Série ATA
KDE - Digikam
PC : be Quiet ! Silent Base 600 - Intel Core I5 12400 - Vent.: be quiet! Shadow Rock 3 + be quiet! LGA1700 mounting-kit - CM: Asus ROG Strix B660-F Gaming WIFI - RAM : Crucial 16GB DDR5-4800 CL40 - SSD: Crucial P5 500GB SSD M.2 2280 PCIe NVMe HDD: Western Digital WD Red Plus 3.5" 4To Série ATA - Alim : be quiet! Pure Power 11 FM 750W - Souris: Logitech MX Anywhere 3. Dual-boot W 10 / Mageia 9 - 64 bits
NAS : Synology DS 215J - DSM 5.2 - WD Red 3.5" 8 T° Série ATA
KDE - Digikam
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie