Mageia 5 - Verdict
Retour d'expèrience migratoire
Retours d'expériences
teutates Membre non connecté
-
- Voir le profil du membre teutates
- Inscrit le : 24/09/2011
- Site internet
- Groupes :
Migration par changement des sources selon le tutoriel (impossible de trouver la page Wiki correspondante sur MLO !)
La machine est en 64 bits avec une carte Nvidia (bénéficiant de la technologie Cuda). Sous Mageia 4, je n'ai pas installé le pilote propriétaire NVidia volontairement.
2 - Problèmes majeurs :
Aucun
3 - Soucis mineurs :
Juste s'armer de patience avec 3.5 heures de migration mais ce n'est pas un véritable problème.
4 -Points positifs :
1) Migration réussie au final.
2) J'apprécie grandement le fait que Mageia 5, avec le pilote libre, me gère parfaitement mon écran. Et avec la définition d'écran optimale que je souhaite, à savoir du 1920 x 1080 (alors que Fedora 22 ne me permet, avec le pilote "Nouveau", que du 1024 x 768).
3) J'apprécie aussi grandement la philosophie de Mageia de n'utiliser que du stable sans taper forcement dans le trop récent (à l'instar de Debian mais avec des délais de mises à niveau plus court sous Mageia). Quand j'évoque ce détail, je pense à Fedora. Sous Fedora 21, j'utilisais KDE 4.x, stable et largement fonctionnel. Avec Fedora 22, c'est Plasma (l'évolution naturelle de KDE 4) que je trouve encore un peu immature (mais c'est mon avis).
4) J'ai lancé rapidement tous mes principaux programmes : ils fonctionnent.
5 - Points négatifs :
1)J'utilise plusieurs systèmes et je dois systématiquement remettre en ordre grub.cfg où je trouve que c'est un peu le bordel dans l'ordre des OS :
-> Mageia 5 (après mise à niveau) toujours numéroté en 4
-> Manjaro sur SDA11 listé avant Mageia Cauldron (SDA2), Fedora 22 (SDA3), Debian 8.1 (SDA5) et cela me perturbe.
Une fois que la syntaxe de grub.cfg a été assimilé dans l'ensemble, en étant vigilant et en faisant une sauvegarde préalable, on peut corriger cela (juste les "titres" de systèmes et l'ordre des OS). Je me dois de préciser cependant que ce joyeux bordel organisé dans grub.cfg a toujours été présent ; ce n'est nullement propre à Mageia 5.
2) amsn a disparu (pour cause d'âge trop avancé je suppose). A remplacer (facilement) par Kopete (ou Pidgin).
3) VMWare Workstation et Player ne fonctionnent plus. Je chercherai plus tard.
Grand merci à toute l'équipe de développement
Edit :Je n'ai supprimé aucun paquet orphelin.
Édité par teutates Le 20/06/2015 à 22h27
Symbioxy Membre non connecté
-
- Voir le profil du membre Symbioxy
- Inscrit le : 01/09/2012
- Groupes :
teutates :
1- Méthode d'installation :
Migration par changement des sources selon le tutoriel (impossible de trouver la page Wiki correspondante sur MLO !)
Migration par changement des sources selon le tutoriel (impossible de trouver la page Wiki correspondante sur MLO !)
Une info de cette importance est disponible dans les Notes de Version :
https://wiki.mageia.org/en/Mageia_5_Notes_de_version-fr#Mise_.C3.A0_niveau_depuis_Mageia_4
Sur la page https://www.mageia.org/fr/downloads/
Il y aussi "Mise à niveau depuis Mageia 4 (4.1)" qui pointe vers le même endroit.
Peut-être qu'il manque quelque chose dans le menu MLO pour encourager les utilisateurs à accéder à ces infos avant de se retrouver directement dans un répertoire avec les iso.
Édité par Symbioxy Le 20/06/2015 à 23h34
ray007 Membre non connecté
-
- Voir le profil du membre ray007
- Inscrit le : 21/06/2010
- Groupes :
Super, j'ai utilisé le Wiki des autres versions pour passer de la Cauldron à l'officielle.
No soucy, tout à super bien marché, en 10' c'était bouclé!
Changement de sources et mises à jour pour passer de la 4 à la 5 et super efficace.
2 ordis, 2 méthodes et 0 problèmes!
Là ils ont bossé comme des Dieux!
J'adore le look de la 5, il est GENIAL.
Longue vie à Mageia!
Raymond
daniel-51 Membre non connecté
-
- Voir le profil du membre daniel-51
- Inscrit le : 03/02/2014
- Groupes :
impossible de redémarrer.
cela bloque à un moment au boot
je n'ai pas vraiment noté le problème, en appuyant sur Echap pendant le boot, les lignes apparaissaient en blanc sur fond blanc.
bon, pas grave, j'ai fait une install (ma partition home est sur un autre disque)
j'ai renommé le répertoire .kde4 pour qu'il en soit créé un neuf.
cette mageia 5 est superbe.
funix Membre non connecté
-
- Voir le profil du membre funix
- Inscrit le : 17/12/2012
- Site internet
- Groupes :
teutates :
2) amsn a disparu (pour cause d'âge trop avancé je suppose). A remplacer (facilement) par Kopete (ou Pidgin).
2) amsn a disparu (pour cause d'âge trop avancé je suppose). A remplacer (facilement) par Kopete (ou Pidgin).
amsn n'évolue plus depuis que microsoft a modifié (sans documenter) son protocole, de toute façon qui utilise encore msn ? Pour mémoire skype marche très bien sous mageia.
thierryR Membre non connecté
-
- Voir le profil du membre thierryR
- Inscrit le : 02/02/2010
- Site internet
débusqueur de bugs et chercheur en améliorations
Amicalement vôtre.
Kernel: 4.4.92-desktop-1.mga5 x86_64 (64 bit) Desktop: KDE 4.14.35 Distro: Mageia 5 thornicroft
Machine: Mobo: ASUSTeK model: X751SA v: 1.0 Bios: American Megatrends v: X751SA.403
CPU: Quad core Intel Pentium N3710 (-MCP-) cache: 1024 KB Graphics: Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
Amicalement vôtre.Kernel: 4.4.92-desktop-1.mga5 x86_64 (64 bit) Desktop: KDE 4.14.35 Distro: Mageia 5 thornicroft
Machine: Mobo: ASUSTeK model: X751SA v: 1.0 Bios: American Megatrends v: X751SA.403
CPU: Quad core Intel Pentium N3710 (-MCP-) cache: 1024 KB Graphics: Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
magnux77 Membre non connecté
-
- Voir le profil du membre magnux77
- Inscrit le : 21/09/2009
- Groupes :
-
Membre d'Honneur
funix :
Et pourquoi utiliser encore ce sulfureux Skype depuis que Firefox Hello est apparu ?...
Pour mémoire skype marche très bien sous mageia.
Adrien.D Membre non connecté
-
- Voir le profil du membre Adrien.D
- Inscrit le : 30/05/2011
- Site internet
- Groupes :
Le tuto marche toujours aussi bien donc
epilip :
funix :
Et pourquoi utiliser encore ce sulfureux Skype depuis que Firefox Hello est apparu ?...Pour mémoire skype marche très bien sous mageia.
Parce que avec Firefox Hello n'est pas inclus dans la version 31
Parce que Firefox Hello ne te permet pas d'échanger des messages textes (liens, ou même demander si la personne est dispo avant d'appeler)
Parce que tous mes contacts sont sur Skype et n'utilisent pas forcément Firefox
![:]](/images/smileys/8.gif)
Config : PC Fixe : X470 GAMING PRO- AMD Ryzen 5 2600X - 16Go RAM - Radeon RX 560 (Pilote libre) - Gentoo Linux - GNOME Desktop - Kernel 5.10 LTS
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
thierryR Membre non connecté
-
- Voir le profil du membre thierryR
- Inscrit le : 02/02/2010
- Site internet
débusqueur de bugs et chercheur en améliorations
Amicalement vôtre.
Kernel: 4.4.92-desktop-1.mga5 x86_64 (64 bit) Desktop: KDE 4.14.35 Distro: Mageia 5 thornicroft
Machine: Mobo: ASUSTeK model: X751SA v: 1.0 Bios: American Megatrends v: X751SA.403
CPU: Quad core Intel Pentium N3710 (-MCP-) cache: 1024 KB Graphics: Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
Amicalement vôtre.Kernel: 4.4.92-desktop-1.mga5 x86_64 (64 bit) Desktop: KDE 4.14.35 Distro: Mageia 5 thornicroft
Machine: Mobo: ASUSTeK model: X751SA v: 1.0 Bios: American Megatrends v: X751SA.403
CPU: Quad core Intel Pentium N3710 (-MCP-) cache: 1024 KB Graphics: Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
TuxMips Membre non connecté
-
- Voir le profil du membre TuxMips
- Inscrit le : 08/09/2010
- Groupes :
Pour le moment, mon PC (uefi mais désactivé pour mageia 4) et le PC de mon épouse (sans uefi) sont toujours sous mga4.
J'en ai aussi un 3ème portable (uefi désactivé sous mga4) qui appartient à une personne de la famille que j'assiste de temps à autres.
Généralement, le support de mageia ancienne version était suffisamment long pour passer la nouvelle version en prenant son temps. Or j'ai lu dans la mailing list (en) que le support de mga 4 ne serait que de trois mois après la sortie de mga 5 !!!!
Si le passage de mga 4 du portable de mon épouse ne devrait pas poser de problème, le basculement des deux autres portables (uefi actuellement désactivé) devrait me prendre du temps !!!
Généralement je ne fais jamais de montée de version en passant par mgaapplet. je reformate systématiquement le /home
Je dois d'abord faire le mien en uefi en reparamétrant le bios avant de charger mga 5, ce que je n'ai jamais fait, je vais découvrir !
Ensuite il y a la numérotation des utilisateurs :sur mon PC les utilisateurs sont en 500, 501...).
Or le principe des utilisateurs sous mga 5 est 1000, 1001 ....
Bref tout cela nécessite de tester, de vérifier, d'autant plus que si je passe à mga 5 et que les utilisateurs restent en 500, 501 ... les conséquences ne semblent pas être neutres, notamment la journalisation du disque dur qui ne serait pas/plus opérante sous mga5 si on reste en 500, 501 ...
En outre les partitions /home sont chiffrées.
Bref 3 mois de maintenance, me semblent particulièrement court :-( Vraiment trop court !!! 6 mois aurait été déjà mieux. Je sais que pour les développeurs c'est lourd. mais quand même !!!
Une install party sera t'elle prévue sur Paris pour avoir un peu d'aide ?
Édité par TuxMips Le 21/06/2015 à 16h34
Utilisateur de Mageïa depuis Mandrake 6.0
Membre de l'AFUL
Sociétaire d' Ouvaton.coop pour mon hébergement numérique.
Membre de l'AFUL
Sociétaire d' Ouvaton.coop pour mon hébergement numérique.
funix Membre non connecté
-
- Voir le profil du membre funix
- Inscrit le : 17/12/2012
- Site internet
- Groupes :
TuxMips :
Ensuite il y a la numérotation des utilisateurs :sur mon PC les utilisateurs sont en 500, 501...).
Or le principe des utilisateurs sous mga 5 est 1000, 1001 ....
Bref tout cela nécessite de tester, de vérifier, d'autant plus que si je passe à mga 5 et que les utilisateurs restent en 500, 501 ... les conséquences ne semblent pas être neutres, notamment la journalisation du disque dur qui ne serait pas/plus opérante sous mga5 si on reste en 500, 501 ...
En outre les partitions /home sont chiffrées.
Ensuite il y a la numérotation des utilisateurs :sur mon PC les utilisateurs sont en 500, 501...).
Or le principe des utilisateurs sous mga 5 est 1000, 1001 ....
Bref tout cela nécessite de tester, de vérifier, d'autant plus que si je passe à mga 5 et que les utilisateurs restent en 500, 501 ... les conséquences ne semblent pas être neutres, notamment la journalisation du disque dur qui ne serait pas/plus opérante sous mga5 si on reste en 500, 501 ...
En outre les partitions /home sont chiffrées.
J'ai contourné depuis longtemps ce problème, j'ai un vieux serveur dell poweredge que j'ai acheté pour une bouchée de pain sur ebay avec des disques en raid5 et une vieille mandrake dessus sur lequel j'ai toutes mes homedirectory et qui fait office de serveur d'authentification (via openldap) pour tous les postes de mon réseau local. Comme ça tout est centralisé et plus besoin de configurer un à un chacun des PC.
teutates Membre non connecté
-
- Voir le profil du membre teutates
- Inscrit le : 24/09/2011
- Site internet
- Groupes :
thierryR :
@teutates Je suis intéressé par le point 5.3 de ton 1er post. Chez moi aussi la VM ne fonctionne plus.
Pour lancer VMWare Workstation et/ou Player, il faut d'abord compiler les modules. Et c'est là que ca foire.
J'ai tout revérifié, en me basant sur mon propre tutoriel. Les prérequis sont déjà remplis :
* gcc installé
* kernel-desktop-devel-3.19.8-3.mga5 installé
* lien symbolique recréé : ln -s /usr/src/kernel-3.19.8-desktop-3.mga5/include/generated/uapi/linux/version.h /usr/src/kernel-3.19.8-desktop-3.mga5/include/linux/version.h
Je lance donc le Player en validant la compilation des modules (avec le mot de passe root). Mais ca plante au moment de lancer les services avec le message "Unable to start services".
Voici le rapport journal sur une tentative échouée avec le Player :
Caché :
2015-06-21T17:58:43.611+02:00| vthread-4| I120: Log for VMware Workstation pid=28470 version=11.0.0 build=build-2305329 option=Release
2015-06-21T17:58:43.611+02:00| vthread-4| I120: The process is 64-bit.
2015-06-21T17:58:43.611+02:00| vthread-4| I120: Host codepage=UTF-8 encoding=UTF-8
2015-06-21T17:58:43.611+02:00| vthread-4| I120: Host is Linux 3.19.8-desktop-3.mga5 Mageia 5
2015-06-21T17:58:43.610+02:00| vthread-4| I120: DictionaryLoad: Cannot open file "/usr/lib/vmware/settings": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: Msg_Reset:
2015-06-21T17:58:43.610+02:00| vthread-4| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: ----------------------------------------
2015-06-21T17:58:43.610+02:00| vthread-4| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: DictionaryLoad: Cannot open file "/home/thierry/.vmware/config": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: Msg_Reset:
2015-06-21T17:58:43.610+02:00| vthread-4| I120: [msg.dictionary.load.openFailed] Cannot open file "/home/thierry/.vmware/config": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: ----------------------------------------
2015-06-21T17:58:43.610+02:00| vthread-4| I120: PREF Optional preferences file not found at /home/thierry/.vmware/config. Using default values.
2015-06-21T17:58:43.632+02:00| vthread-4| W110: Logging to /tmp/vmware-root/vmware-28470.log
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Created new pathsHash.
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.638+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.638+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.643+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.643+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.768+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T17:58:43.768+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T17:58:43.781+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmmon module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmnet module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmblock module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmci module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vsock module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Setting vsock to depend on vmci.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Invoking modinfo on "vmmon".
2015-06-21T17:58:43.783+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.783+02:00| vthread-4| I120: Invoking modinfo on "vmnet".
2015-06-21T17:58:43.784+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.784+02:00| vthread-4| I120: Invoking modinfo on "vmblock".
2015-06-21T17:58:43.785+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.785+02:00| vthread-4| I120: Invoking modinfo on "vmci".
2015-06-21T17:58:43.786+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.786+02:00| vthread-4| I120: Invoking modinfo on "vsock".
2015-06-21T17:58:43.788+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 0.
2015-06-21T17:58:43.797+02:00| vthread-4| I120: to be installed: vmmon status: 0
2015-06-21T17:58:43.797+02:00| vthread-4| I120: to be installed: vmnet status: 0
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.804+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.804+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.809+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.809+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.932+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T17:58:43.932+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Kernel header path retrieved from FileEntry: /lib/modules/3.19.8-desktop-3.mga5/build/include
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Update kernel header path to /lib/modules/3.19.8-desktop-3.mga5/build/include
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.945+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.945+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.950+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.950+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.951+02:00| vthread-4| I120: Found compiler at "/usr/bin/gcc"
2015-06-21T17:58:43.954+02:00| vthread-4| I120: Got gcc version "4.9.2".
2015-06-21T17:58:43.954+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.954+02:00| vthread-4| I120: Using user supplied compiler "/usr/bin/gcc".
2015-06-21T17:58:43.957+02:00| vthread-4| I120: Got gcc version "4.9.2".
2015-06-21T17:58:43.957+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.961+02:00| vthread-4| I120: Trying to find a suitable PBM set for kernel "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.961+02:00| vthread-4| I120: No matching PBM set was found for kernel "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.962+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.962+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.962+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.962+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.962+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.967+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.967+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.968+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.968+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.968+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.968+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.968+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Using temp dir "/tmp".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.974+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.974+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.979+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.979+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:44.110+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T17:58:44.110+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T17:58:44.123+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T17:58:44.124+02:00| vthread-4| I120: Invoking modinfo on "vmmon".
2015-06-21T17:58:44.125+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:44.125+02:00| vthread-4| I120: Invoking modinfo on "vmnet".
2015-06-21T17:58:44.126+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:44.212+02:00| vthread-4| I120: Setting destination path for vmmon to "/lib/modules/3.19.8-desktop-3.mga5/misc/vmmon.ko".
2015-06-21T17:58:44.212+02:00| vthread-4| I120: Extracting the vmmon source from "/usr/lib/vmware/modules/source/vmmon.tar".
2015-06-21T17:58:44.214+02:00| vthread-4| I120: Successfully extracted the vmmon source.
2015-06-21T17:58:44.214+02:00| vthread-4| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-h90fy0/vmmon-only auto-build HEADER_DIR=/lib/modules/3.19.8-desktop-3.mga5/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2015-06-21T17:58:45.640+02:00| vthread-4| I120: Successfully built vmmon. Module is currently at "/tmp/modconfig-h90fy0/vmmon.o".
2015-06-21T17:58:45.640+02:00| vthread-4| I120: Found the vmmon symvers file at "/tmp/modconfig-h90fy0/vmmon-only/Module.symvers".
2015-06-21T17:58:45.640+02:00| vthread-4| I120: Installing vmmon from /tmp/modconfig-h90fy0/vmmon.o to /lib/modules/3.19.8-desktop-3.mga5/misc/vmmon.ko.
2015-06-21T17:58:45.642+02:00| vthread-4| I120: Registering file "/lib/modules/3.19.8-desktop-3.mga5/misc/vmmon.ko".
2015-06-21T17:58:46.163+02:00| vthread-4| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.
2015-06-21T17:58:46.163+02:00| vthread-4| I120: Registering file "/usr/lib/vmware/symvers/vmmon-3.19.8-desktop-3.mga5".
2015-06-21T17:58:46.430+02:00| vthread-4| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.
2015-06-21T17:58:46.431+02:00| vthread-4| I120: Setting destination path for vmnet to "/lib/modules/3.19.8-desktop-3.mga5/misc/vmnet.ko".
2015-06-21T17:58:46.431+02:00| vthread-4| I120: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2015-06-21T17:58:46.434+02:00| vthread-4| I120: Successfully extracted the vmnet source.
2015-06-21T17:58:46.434+02:00| vthread-4| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-h90fy0/vmnet-only auto-build HEADER_DIR=/lib/modules/3.19.8-desktop-3.mga5/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2015-06-21T17:58:47.674+02:00| vthread-4| W110: Failed to build vmnet. Failed to execute the build command.
2015-06-21T18:00:15.115+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T18:00:15.116+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.116+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T18:00:15.116+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T18:00:15.116+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Using temp dir "/tmp".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T18:00:15.120+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T18:00:15.120+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T18:00:15.124+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.125+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T18:00:15.249+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T18:00:15.249+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T18:00:15.264+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T18:00:15.264+02:00| vthread-4| I120: Invoking modinfo on "vmmon".
2015-06-21T18:00:15.266+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 0.
2015-06-21T18:00:15.266+02:00| vthread-4| I120: Invoking modinfo on "vmnet".
2015-06-21T18:00:15.268+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T18:00:15.382+02:00| vthread-4| I120: Setting destination path for vmnet to "/lib/modules/3.19.8-desktop-3.mga5/misc/vmnet.ko".
2015-06-21T18:00:15.382+02:00| vthread-4| I120: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2015-06-21T18:00:15.384+02:00| vthread-4| I120: Successfully extracted the vmnet source.
2015-06-21T18:00:15.384+02:00| vthread-4| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-jiO89n/vmnet-only auto-build HEADER_DIR=/lib/modules/3.19.8-desktop-3.mga5/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2015-06-21T18:00:16.632+02:00| vthread-4| W110: Failed to build vmnet. Failed to execute the build command.
2015-06-21T17:58:43.611+02:00| vthread-4| I120: The process is 64-bit.
2015-06-21T17:58:43.611+02:00| vthread-4| I120: Host codepage=UTF-8 encoding=UTF-8
2015-06-21T17:58:43.611+02:00| vthread-4| I120: Host is Linux 3.19.8-desktop-3.mga5 Mageia 5
2015-06-21T17:58:43.610+02:00| vthread-4| I120: DictionaryLoad: Cannot open file "/usr/lib/vmware/settings": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: Msg_Reset:
2015-06-21T17:58:43.610+02:00| vthread-4| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: ----------------------------------------
2015-06-21T17:58:43.610+02:00| vthread-4| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: DictionaryLoad: Cannot open file "/home/thierry/.vmware/config": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: Msg_Reset:
2015-06-21T17:58:43.610+02:00| vthread-4| I120: [msg.dictionary.load.openFailed] Cannot open file "/home/thierry/.vmware/config": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: ----------------------------------------
2015-06-21T17:58:43.610+02:00| vthread-4| I120: PREF Optional preferences file not found at /home/thierry/.vmware/config. Using default values.
2015-06-21T17:58:43.632+02:00| vthread-4| W110: Logging to /tmp/vmware-root/vmware-28470.log
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Created new pathsHash.
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.638+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.638+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.643+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.643+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.768+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T17:58:43.768+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T17:58:43.781+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmmon module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmnet module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmblock module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmci module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vsock module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Setting vsock to depend on vmci.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Invoking modinfo on "vmmon".
2015-06-21T17:58:43.783+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.783+02:00| vthread-4| I120: Invoking modinfo on "vmnet".
2015-06-21T17:58:43.784+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.784+02:00| vthread-4| I120: Invoking modinfo on "vmblock".
2015-06-21T17:58:43.785+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.785+02:00| vthread-4| I120: Invoking modinfo on "vmci".
2015-06-21T17:58:43.786+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.786+02:00| vthread-4| I120: Invoking modinfo on "vsock".
2015-06-21T17:58:43.788+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 0.
2015-06-21T17:58:43.797+02:00| vthread-4| I120: to be installed: vmmon status: 0
2015-06-21T17:58:43.797+02:00| vthread-4| I120: to be installed: vmnet status: 0
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.804+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.804+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.809+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.809+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.932+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T17:58:43.932+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Kernel header path retrieved from FileEntry: /lib/modules/3.19.8-desktop-3.mga5/build/include
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Update kernel header path to /lib/modules/3.19.8-desktop-3.mga5/build/include
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.945+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.945+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.950+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.950+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.951+02:00| vthread-4| I120: Found compiler at "/usr/bin/gcc"
2015-06-21T17:58:43.954+02:00| vthread-4| I120: Got gcc version "4.9.2".
2015-06-21T17:58:43.954+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.954+02:00| vthread-4| I120: Using user supplied compiler "/usr/bin/gcc".
2015-06-21T17:58:43.957+02:00| vthread-4| I120: Got gcc version "4.9.2".
2015-06-21T17:58:43.957+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.961+02:00| vthread-4| I120: Trying to find a suitable PBM set for kernel "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.961+02:00| vthread-4| I120: No matching PBM set was found for kernel "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.962+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.962+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.962+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.962+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.962+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.967+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.967+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.968+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.968+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.968+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.968+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.968+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Using temp dir "/tmp".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.974+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.974+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.979+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.979+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:44.110+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T17:58:44.110+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T17:58:44.123+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T17:58:44.124+02:00| vthread-4| I120: Invoking modinfo on "vmmon".
2015-06-21T17:58:44.125+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:44.125+02:00| vthread-4| I120: Invoking modinfo on "vmnet".
2015-06-21T17:58:44.126+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:44.212+02:00| vthread-4| I120: Setting destination path for vmmon to "/lib/modules/3.19.8-desktop-3.mga5/misc/vmmon.ko".
2015-06-21T17:58:44.212+02:00| vthread-4| I120: Extracting the vmmon source from "/usr/lib/vmware/modules/source/vmmon.tar".
2015-06-21T17:58:44.214+02:00| vthread-4| I120: Successfully extracted the vmmon source.
2015-06-21T17:58:44.214+02:00| vthread-4| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-h90fy0/vmmon-only auto-build HEADER_DIR=/lib/modules/3.19.8-desktop-3.mga5/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2015-06-21T17:58:45.640+02:00| vthread-4| I120: Successfully built vmmon. Module is currently at "/tmp/modconfig-h90fy0/vmmon.o".
2015-06-21T17:58:45.640+02:00| vthread-4| I120: Found the vmmon symvers file at "/tmp/modconfig-h90fy0/vmmon-only/Module.symvers".
2015-06-21T17:58:45.640+02:00| vthread-4| I120: Installing vmmon from /tmp/modconfig-h90fy0/vmmon.o to /lib/modules/3.19.8-desktop-3.mga5/misc/vmmon.ko.
2015-06-21T17:58:45.642+02:00| vthread-4| I120: Registering file "/lib/modules/3.19.8-desktop-3.mga5/misc/vmmon.ko".
2015-06-21T17:58:46.163+02:00| vthread-4| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.
2015-06-21T17:58:46.163+02:00| vthread-4| I120: Registering file "/usr/lib/vmware/symvers/vmmon-3.19.8-desktop-3.mga5".
2015-06-21T17:58:46.430+02:00| vthread-4| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.
2015-06-21T17:58:46.431+02:00| vthread-4| I120: Setting destination path for vmnet to "/lib/modules/3.19.8-desktop-3.mga5/misc/vmnet.ko".
2015-06-21T17:58:46.431+02:00| vthread-4| I120: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2015-06-21T17:58:46.434+02:00| vthread-4| I120: Successfully extracted the vmnet source.
2015-06-21T17:58:46.434+02:00| vthread-4| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-h90fy0/vmnet-only auto-build HEADER_DIR=/lib/modules/3.19.8-desktop-3.mga5/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2015-06-21T17:58:47.674+02:00| vthread-4| W110: Failed to build vmnet. Failed to execute the build command.
2015-06-21T18:00:15.115+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T18:00:15.116+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.116+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T18:00:15.116+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T18:00:15.116+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Using temp dir "/tmp".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T18:00:15.120+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T18:00:15.120+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T18:00:15.124+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.125+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T18:00:15.249+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T18:00:15.249+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T18:00:15.264+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T18:00:15.264+02:00| vthread-4| I120: Invoking modinfo on "vmmon".
2015-06-21T18:00:15.266+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 0.
2015-06-21T18:00:15.266+02:00| vthread-4| I120: Invoking modinfo on "vmnet".
2015-06-21T18:00:15.268+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T18:00:15.382+02:00| vthread-4| I120: Setting destination path for vmnet to "/lib/modules/3.19.8-desktop-3.mga5/misc/vmnet.ko".
2015-06-21T18:00:15.382+02:00| vthread-4| I120: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2015-06-21T18:00:15.384+02:00| vthread-4| I120: Successfully extracted the vmnet source.
2015-06-21T18:00:15.384+02:00| vthread-4| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-jiO89n/vmnet-only auto-build HEADER_DIR=/lib/modules/3.19.8-desktop-3.mga5/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2015-06-21T18:00:16.632+02:00| vthread-4| W110: Failed to build vmnet. Failed to execute the build command.
Reste à comprendre ce fichier journal.
teutates Membre non connecté
-
- Voir le profil du membre teutates
- Inscrit le : 24/09/2011
- Site internet
- Groupes :
TuxMips :
Bonjour à tous
....
Ensuite il y a la numérotation des utilisateurs :sur mon PC les utilisateurs sont en 500, 501...).
Or le principe des utilisateurs sous mga 5 est 1000, 1001 ....
Bref tout cela nécessite de tester, de vérifier, d'autant plus que si je passe à mga 5 et que les utilisateurs restent en 500, 501 ... les conséquences ne semblent pas être neutres, notamment la journalisation du disque dur qui ne serait pas/plus opérante sous mga5 si on reste en 500, 501 ...
En outre les partitions /home sont chiffrées.
Bref 3 mois de maintenance, me semblent particulièrement court :-( Vraiment trop court !!! 6 mois aurait été déjà mieux. Je sais que pour les développeurs c'est lourd. mais quand même !!!
...
....
Ensuite il y a la numérotation des utilisateurs :sur mon PC les utilisateurs sont en 500, 501...).
Or le principe des utilisateurs sous mga 5 est 1000, 1001 ....
Bref tout cela nécessite de tester, de vérifier, d'autant plus que si je passe à mga 5 et que les utilisateurs restent en 500, 501 ... les conséquences ne semblent pas être neutres, notamment la journalisation du disque dur qui ne serait pas/plus opérante sous mga5 si on reste en 500, 501 ...
En outre les partitions /home sont chiffrées.
Bref 3 mois de maintenance, me semblent particulièrement court :-( Vraiment trop court !!! 6 mois aurait été déjà mieux. Je sais que pour les développeurs c'est lourd. mais quand même !!!
...
Concernant la numérotation, j'avais déjà remarqué cela depuis longtemps puisque j'utilise aussi d'autres distributions. J'avais solutionné en imposant la valeur 1000 lors de l'installation. Pour récupérer tes fichiers, utilise la commande suivante :
# chown -R user:user /home/toto
Sous root, avec R pour la récursivité.
3 mois de maintenance pour Mageia 4, parce que le développement de Mageia 5a pris du retard.
teutates Membre non connecté
-
- Voir le profil du membre teutates
- Inscrit le : 24/09/2011
- Site internet
- Groupes :
teutates :
Pour lancer VMWare Workstation et/ou Player, il faut d'abord compiler les modules. Et c'est là que ca foire.
J'ai tout revérifié, en me basant sur mon propre tutoriel. Les prérequis sont déjà remplis :
* gcc installé
* kernel-desktop-devel-3.19.8-3.mga5 installé
* lien symbolique recréé : ln -s /usr/src/kernel-3.19.8-desktop-3.mga5/include/generated/uapi/linux/version.h /usr/src/kernel-3.19.8-desktop-3.mga5/include/linux/version.h
Je lance donc le Player en validant la compilation des modules (avec le mot de passe root). Mais ca plante au moment de lancer les services avec le message "Unable to start services".
Voici le rapport journal sur une tentative échouée avec le Player :
<span class="formatter-hide">Caché:</span><div class="hide" onclick="bb_hide(this)"><div class="hide2">2015-06-21T17:58:43.611+02:00| vthread-4| I120: Log for VMware Workstation pid=28470 version=11.0.0 build=build-2305329 option=Release
2015-06-21T17:58:43.611+02:00| vthread-4| I120: The process is 64-bit.
2015-06-21T17:58:43.611+02:00| vthread-4| I120: Host codepage=UTF-8 encoding=UTF-8
2015-06-21T17:58:43.611+02:00| vthread-4| I120: Host is Linux 3.19.8-desktop-3.mga5 Mageia 5
2015-06-21T17:58:43.610+02:00| vthread-4| I120: DictionaryLoad: Cannot open file "/usr/lib/vmware/settings": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: Msg_Reset:
2015-06-21T17:58:43.610+02:00| vthread-4| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: ----------------------------------------
2015-06-21T17:58:43.610+02:00| vthread-4| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: DictionaryLoad: Cannot open file "/home/thierry/.vmware/config": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: Msg_Reset:
2015-06-21T17:58:43.610+02:00| vthread-4| I120: [msg.dictionary.load.openFailed] Cannot open file "/home/thierry/.vmware/config": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: ----------------------------------------
2015-06-21T17:58:43.610+02:00| vthread-4| I120: PREF Optional preferences file not found at /home/thierry/.vmware/config. Using default values.
2015-06-21T17:58:43.632+02:00| vthread-4| W110: Logging to /tmp/vmware-root/vmware-28470.log
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Created new pathsHash.
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.638+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.638+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.643+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.643+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.768+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T17:58:43.768+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T17:58:43.781+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmmon module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmnet module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmblock module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmci module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vsock module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Setting vsock to depend on vmci.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Invoking modinfo on "vmmon".
2015-06-21T17:58:43.783+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.783+02:00| vthread-4| I120: Invoking modinfo on "vmnet".
2015-06-21T17:58:43.784+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.784+02:00| vthread-4| I120: Invoking modinfo on "vmblock".
2015-06-21T17:58:43.785+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.785+02:00| vthread-4| I120: Invoking modinfo on "vmci".
2015-06-21T17:58:43.786+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.786+02:00| vthread-4| I120: Invoking modinfo on "vsock".
2015-06-21T17:58:43.788+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 0.
2015-06-21T17:58:43.797+02:00| vthread-4| I120: to be installed: vmmon status: 0
2015-06-21T17:58:43.797+02:00| vthread-4| I120: to be installed: vmnet status: 0
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.804+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.804+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.809+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.809+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.932+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T17:58:43.932+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Kernel header path retrieved from FileEntry: /lib/modules/3.19.8-desktop-3.mga5/build/include
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Update kernel header path to /lib/modules/3.19.8-desktop-3.mga5/build/include
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.945+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.945+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.950+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.950+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.951+02:00| vthread-4| I120: Found compiler at "/usr/bin/gcc"
2015-06-21T17:58:43.954+02:00| vthread-4| I120: Got gcc version "4.9.2".
2015-06-21T17:58:43.954+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.954+02:00| vthread-4| I120: Using user supplied compiler "/usr/bin/gcc".
2015-06-21T17:58:43.957+02:00| vthread-4| I120: Got gcc version "4.9.2".
2015-06-21T17:58:43.957+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.961+02:00| vthread-4| I120: Trying to find a suitable PBM set for kernel "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.961+02:00| vthread-4| I120: No matching PBM set was found for kernel "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.962+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.962+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.962+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.962+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.962+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.967+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.967+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.968+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.968+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.968+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.968+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.968+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Using temp dir "/tmp".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.974+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.974+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.979+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.979+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:44.110+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T17:58:44.110+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T17:58:44.123+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T17:58:44.124+02:00| vthread-4| I120: Invoking modinfo on "vmmon".
2015-06-21T17:58:44.125+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:44.125+02:00| vthread-4| I120: Invoking modinfo on "vmnet".
2015-06-21T17:58:44.126+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:44.212+02:00| vthread-4| I120: Setting destination path for vmmon to "/lib/modules/3.19.8-desktop-3.mga5/misc/vmmon.ko".
2015-06-21T17:58:44.212+02:00| vthread-4| I120: Extracting the vmmon source from "/usr/lib/vmware/modules/source/vmmon.tar".
2015-06-21T17:58:44.214+02:00| vthread-4| I120: Successfully extracted the vmmon source.
2015-06-21T17:58:44.214+02:00| vthread-4| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-h90fy0/vmmon-only auto-build HEADER_DIR=/lib/modules/3.19.8-desktop-3.mga5/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2015-06-21T17:58:45.640+02:00| vthread-4| I120: Successfully built vmmon. Module is currently at "/tmp/modconfig-h90fy0/vmmon.o".
2015-06-21T17:58:45.640+02:00| vthread-4| I120: Found the vmmon symvers file at "/tmp/modconfig-h90fy0/vmmon-only/Module.symvers".
2015-06-21T17:58:45.640+02:00| vthread-4| I120: Installing vmmon from /tmp/modconfig-h90fy0/vmmon.o to /lib/modules/3.19.8-desktop-3.mga5/misc/vmmon.ko.
2015-06-21T17:58:45.642+02:00| vthread-4| I120: Registering file "/lib/modules/3.19.8-desktop-3.mga5/misc/vmmon.ko".
2015-06-21T17:58:46.163+02:00| vthread-4| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.
2015-06-21T17:58:46.163+02:00| vthread-4| I120: Registering file "/usr/lib/vmware/symvers/vmmon-3.19.8-desktop-3.mga5".
2015-06-21T17:58:46.430+02:00| vthread-4| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.
2015-06-21T17:58:46.431+02:00| vthread-4| I120: Setting destination path for vmnet to "/lib/modules/3.19.8-desktop-3.mga5/misc/vmnet.ko".
2015-06-21T17:58:46.431+02:00| vthread-4| I120: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2015-06-21T17:58:46.434+02:00| vthread-4| I120: Successfully extracted the vmnet source.
2015-06-21T17:58:46.434+02:00| vthread-4| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-h90fy0/vmnet-only auto-build HEADER_DIR=/lib/modules/3.19.8-desktop-3.mga5/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2015-06-21T17:58:47.674+02:00| vthread-4| W110: Failed to build vmnet. Failed to execute the build command.
2015-06-21T18:00:15.115+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T18:00:15.116+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.116+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T18:00:15.116+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T18:00:15.116+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Using temp dir "/tmp".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T18:00:15.120+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T18:00:15.120+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T18:00:15.124+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.125+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T18:00:15.249+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T18:00:15.249+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T18:00:15.264+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T18:00:15.264+02:00| vthread-4| I120: Invoking modinfo on "vmmon".
2015-06-21T18:00:15.266+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 0.
2015-06-21T18:00:15.266+02:00| vthread-4| I120: Invoking modinfo on "vmnet".
2015-06-21T18:00:15.268+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T18:00:15.382+02:00| vthread-4| I120: Setting destination path for vmnet to "/lib/modules/3.19.8-desktop-3.mga5/misc/vmnet.ko".
2015-06-21T18:00:15.382+02:00| vthread-4| I120: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2015-06-21T18:00:15.384+02:00| vthread-4| I120: Successfully extracted the vmnet source.
2015-06-21T18:00:15.384+02:00| vthread-4| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-jiO89n/vmnet-only auto-build HEADER_DIR=/lib/modules/3.19.8-desktop-3.mga5/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2015-06-21T18:00:16.632+02:00| vthread-4| W110: Failed to build vmnet. Failed to execute the build command.
</div>thierryR :
@teutates Je suis intéressé par le point 5.3 de ton 1er post. Chez moi aussi la VM ne fonctionne plus.
Pour lancer VMWare Workstation et/ou Player, il faut d'abord compiler les modules. Et c'est là que ca foire.
J'ai tout revérifié, en me basant sur mon propre tutoriel. Les prérequis sont déjà remplis :
* gcc installé
* kernel-desktop-devel-3.19.8-3.mga5 installé
* lien symbolique recréé : ln -s /usr/src/kernel-3.19.8-desktop-3.mga5/include/generated/uapi/linux/version.h /usr/src/kernel-3.19.8-desktop-3.mga5/include/linux/version.h
Je lance donc le Player en validant la compilation des modules (avec le mot de passe root). Mais ca plante au moment de lancer les services avec le message "Unable to start services".
Voici le rapport journal sur une tentative échouée avec le Player :
<span class="formatter-hide">Caché:</span><div class="hide" onclick="bb_hide(this)"><div class="hide2">2015-06-21T17:58:43.611+02:00| vthread-4| I120: Log for VMware Workstation pid=28470 version=11.0.0 build=build-2305329 option=Release
2015-06-21T17:58:43.611+02:00| vthread-4| I120: The process is 64-bit.
2015-06-21T17:58:43.611+02:00| vthread-4| I120: Host codepage=UTF-8 encoding=UTF-8
2015-06-21T17:58:43.611+02:00| vthread-4| I120: Host is Linux 3.19.8-desktop-3.mga5 Mageia 5
2015-06-21T17:58:43.610+02:00| vthread-4| I120: DictionaryLoad: Cannot open file "/usr/lib/vmware/settings": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: Msg_Reset:
2015-06-21T17:58:43.610+02:00| vthread-4| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: ----------------------------------------
2015-06-21T17:58:43.610+02:00| vthread-4| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: DictionaryLoad: Cannot open file "/home/thierry/.vmware/config": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: Msg_Reset:
2015-06-21T17:58:43.610+02:00| vthread-4| I120: [msg.dictionary.load.openFailed] Cannot open file "/home/thierry/.vmware/config": Aucun fichier ou dossier de ce type.
2015-06-21T17:58:43.610+02:00| vthread-4| I120: ----------------------------------------
2015-06-21T17:58:43.610+02:00| vthread-4| I120: PREF Optional preferences file not found at /home/thierry/.vmware/config. Using default values.
2015-06-21T17:58:43.632+02:00| vthread-4| W110: Logging to /tmp/vmware-root/vmware-28470.log
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Created new pathsHash.
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.638+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.638+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.638+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.643+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.643+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.768+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T17:58:43.768+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T17:58:43.781+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmmon module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmnet module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmblock module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vmci module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Reading in info for the vsock module.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Setting vsock to depend on vmci.
2015-06-21T17:58:43.782+02:00| vthread-4| I120: Invoking modinfo on "vmmon".
2015-06-21T17:58:43.783+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.783+02:00| vthread-4| I120: Invoking modinfo on "vmnet".
2015-06-21T17:58:43.784+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.784+02:00| vthread-4| I120: Invoking modinfo on "vmblock".
2015-06-21T17:58:43.785+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.785+02:00| vthread-4| I120: Invoking modinfo on "vmci".
2015-06-21T17:58:43.786+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:43.786+02:00| vthread-4| I120: Invoking modinfo on "vsock".
2015-06-21T17:58:43.788+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 0.
2015-06-21T17:58:43.797+02:00| vthread-4| I120: to be installed: vmmon status: 0
2015-06-21T17:58:43.797+02:00| vthread-4| I120: to be installed: vmnet status: 0
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.804+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.804+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.804+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.809+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.809+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.932+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T17:58:43.932+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Kernel header path retrieved from FileEntry: /lib/modules/3.19.8-desktop-3.mga5/build/include
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Update kernel header path to /lib/modules/3.19.8-desktop-3.mga5/build/include
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.945+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.945+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.945+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.950+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.950+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.951+02:00| vthread-4| I120: Found compiler at "/usr/bin/gcc"
2015-06-21T17:58:43.954+02:00| vthread-4| I120: Got gcc version "4.9.2".
2015-06-21T17:58:43.954+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.954+02:00| vthread-4| I120: Using user supplied compiler "/usr/bin/gcc".
2015-06-21T17:58:43.957+02:00| vthread-4| I120: Got gcc version "4.9.2".
2015-06-21T17:58:43.957+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.961+02:00| vthread-4| I120: Trying to find a suitable PBM set for kernel "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.961+02:00| vthread-4| I120: No matching PBM set was found for kernel "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.962+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.962+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.962+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.962+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.962+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.967+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.967+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.968+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T17:58:43.968+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.968+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.968+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.968+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Using temp dir "/tmp".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.974+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T17:58:43.974+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T17:58:43.974+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T17:58:43.979+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T17:58:43.979+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T17:58:44.110+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T17:58:44.110+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T17:58:44.123+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T17:58:44.124+02:00| vthread-4| I120: Invoking modinfo on "vmmon".
2015-06-21T17:58:44.125+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:44.125+02:00| vthread-4| I120: Invoking modinfo on "vmnet".
2015-06-21T17:58:44.126+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T17:58:44.212+02:00| vthread-4| I120: Setting destination path for vmmon to "/lib/modules/3.19.8-desktop-3.mga5/misc/vmmon.ko".
2015-06-21T17:58:44.212+02:00| vthread-4| I120: Extracting the vmmon source from "/usr/lib/vmware/modules/source/vmmon.tar".
2015-06-21T17:58:44.214+02:00| vthread-4| I120: Successfully extracted the vmmon source.
2015-06-21T17:58:44.214+02:00| vthread-4| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-h90fy0/vmmon-only auto-build HEADER_DIR=/lib/modules/3.19.8-desktop-3.mga5/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2015-06-21T17:58:45.640+02:00| vthread-4| I120: Successfully built vmmon. Module is currently at "/tmp/modconfig-h90fy0/vmmon.o".
2015-06-21T17:58:45.640+02:00| vthread-4| I120: Found the vmmon symvers file at "/tmp/modconfig-h90fy0/vmmon-only/Module.symvers".
2015-06-21T17:58:45.640+02:00| vthread-4| I120: Installing vmmon from /tmp/modconfig-h90fy0/vmmon.o to /lib/modules/3.19.8-desktop-3.mga5/misc/vmmon.ko.
2015-06-21T17:58:45.642+02:00| vthread-4| I120: Registering file "/lib/modules/3.19.8-desktop-3.mga5/misc/vmmon.ko".
2015-06-21T17:58:46.163+02:00| vthread-4| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.
2015-06-21T17:58:46.163+02:00| vthread-4| I120: Registering file "/usr/lib/vmware/symvers/vmmon-3.19.8-desktop-3.mga5".
2015-06-21T17:58:46.430+02:00| vthread-4| I120: "/usr/lib/vmware-installer/2.1.0/vmware-installer" exited with status 0.
2015-06-21T17:58:46.431+02:00| vthread-4| I120: Setting destination path for vmnet to "/lib/modules/3.19.8-desktop-3.mga5/misc/vmnet.ko".
2015-06-21T17:58:46.431+02:00| vthread-4| I120: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2015-06-21T17:58:46.434+02:00| vthread-4| I120: Successfully extracted the vmnet source.
2015-06-21T17:58:46.434+02:00| vthread-4| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-h90fy0/vmnet-only auto-build HEADER_DIR=/lib/modules/3.19.8-desktop-3.mga5/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2015-06-21T17:58:47.674+02:00| vthread-4| W110: Failed to build vmnet. Failed to execute the build command.
2015-06-21T18:00:15.115+02:00| vthread-4| I120: The GCC version matches the kernel GCC minor version like a glove.
2015-06-21T18:00:15.116+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.116+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T18:00:15.116+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T18:00:15.116+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Using temp dir "/tmp".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Obtaining info using the running kernel.
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Setting header path for 3.19.8-desktop-3.mga5 to "/lib/modules/3.19.8-desktop-3.mga5/build/include".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Validating path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for kernel release "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.120+02:00| vthread-4| I120: Failed to find /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h
2015-06-21T18:00:15.120+02:00| vthread-4| I120: /lib/modules/3.19.8-desktop-3.mga5/build/include/linux/version.h not found, looking for generated/uapi/linux/version.h instead.
2015-06-21T18:00:15.120+02:00| vthread-4| I120: using /usr/bin/gcc for preprocess check
2015-06-21T18:00:15.124+02:00| vthread-4| I120: Preprocessed UTS_RELEASE, got value "3.19.8-desktop-3.mga5".
2015-06-21T18:00:15.125+02:00| vthread-4| I120: The header path "/lib/modules/3.19.8-desktop-3.mga5/build/include" for the kernel "3.19.8-desktop-3.mga5" is valid. Whoohoo!
2015-06-21T18:00:15.249+02:00| vthread-4| I120: found symbol version file /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers
2015-06-21T18:00:15.249+02:00| vthread-4| I120: Reading symbol versions from /lib/modules/3.19.8-desktop-3.mga5/build/Module.symvers.
2015-06-21T18:00:15.264+02:00| vthread-4| I120: Read 17913 symbol versions
2015-06-21T18:00:15.264+02:00| vthread-4| I120: Invoking modinfo on "vmmon".
2015-06-21T18:00:15.266+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 0.
2015-06-21T18:00:15.266+02:00| vthread-4| I120: Invoking modinfo on "vmnet".
2015-06-21T18:00:15.268+02:00| vthread-4| I120: "/sbin/modinfo" exited with status 256.
2015-06-21T18:00:15.382+02:00| vthread-4| I120: Setting destination path for vmnet to "/lib/modules/3.19.8-desktop-3.mga5/misc/vmnet.ko".
2015-06-21T18:00:15.382+02:00| vthread-4| I120: Extracting the vmnet source from "/usr/lib/vmware/modules/source/vmnet.tar".
2015-06-21T18:00:15.384+02:00| vthread-4| I120: Successfully extracted the vmnet source.
2015-06-21T18:00:15.384+02:00| vthread-4| I120: Building module with command "/usr/bin/make -j8 -C /tmp/modconfig-jiO89n/vmnet-only auto-build HEADER_DIR=/lib/modules/3.19.8-desktop-3.mga5/build/include CC=/usr/bin/gcc IS_GCC_3=no"
2015-06-21T18:00:16.632+02:00| vthread-4| W110: Failed to build vmnet. Failed to execute the build command.
Reste à comprendre ce fichier journal.</div>
Nouvelle tentative.
J'ai d'abord téléchargé le nouveau bundle officiel, en tablant sur un bug corrigé entretemps.
1) Désinstallation
# vmware-installer --uninstall-product vmware-workstation
ou
# vmware-installer --uninstall-product vmware-player
2) Installation de la nouvelle version
Les nouvelles versions sont :
-> VMware-Player-7.1.2-2780323.x86_64.bundle
-> VMware-Workstation-Full-11.1.2-2780323.x86_64.bundle
Penser à rendre exécutable le bundle en premier.
[root@localhost ~]# sh /home/thierry/tmp/Softwares/VMware/VMware-Workstation-Full-11.1.2-2780323.x86_64.bundle
Extracting VMware Installer...done.
[root@localhost ~]#
Extracting VMware Installer...done.
[root@localhost ~]#
L'installation se passe sans problème, reprenant même le numéro de série.
Verdict : parfait !
L'application démarre désormais sans problème et même sans devoir compiler les modules (déjà fait lors de l'installation). C'était bien un bug de la vieille version corrigé entretemps.
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie