Forum

[maison@localhost ~]$ dmesg

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 3.8.13.4-desktop-1.mga3 (iurt@ecosse.mageia.org) (gcc version 4.7.2 (GCC) ) #1 SMP Thu Jul 4 14:04:55 UTC 2013

[ 0.000000] e820: BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable

[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000002ffeffff] usable

[ 0.000000] BIOS-e820: [mem 0x000000002fff0000-0x000000002fff2fff] ACPI NVS

[ 0.000000] BIOS-e820: [mem 0x000000002fff3000-0x000000002fffffff] ACPI data

[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved

[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!

[ 0.000000] SMBIOS 2.3 present.

[ 0.000000] DMI: MEDIONPC /MS-6701, BIOS 6.00 PG 09/11/2002

[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved

[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[ 0.000000] e820: last_pfn = 0x2fff0 max_arch_pfn = 0x100000

[ 0.000000] MTRR default type: uncachable

[ 0.000000] MTRR fixed ranges enabled:

[ 0.000000] 00000-9FFFF write-back

[ 0.000000] A0000-AFFFF uncachable

[ 0.000000] B0000-BFFFF write-combining

[ 0.000000] C0000-CDFFF write-protect

[ 0.000000] CE000-EFFFF uncachable

[ 0.000000] F0000-FFFFF write-through

[ 0.000000] MTRR variable ranges enabled:

[ 0.000000] 0 base 000000000 mask FE0000000 write-back

[ 0.000000] 1 base 020000000 mask FF0000000 write-back

[ 0.000000] 2 base 0D0000000 mask FF8000000 write-combining

[ 0.000000] 3 disabled

[ 0.000000] 4 disabled

[ 0.000000] 5 disabled

[ 0.000000] 6 disabled

[ 0.000000] 7 disabled

[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[ 0.000000] initial memory mapped: [mem 0x00000000-0x00ffffff]

[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384

[ 0.000000] init_memory_mapping: [mem 0x00000000-0x2ffeffff]

[ 0.000000] [mem 0x00000000-0x003fffff] page 4k

[ 0.000000] [mem 0x00400000-0x2fbfffff] page 2M

[ 0.000000] [mem 0x2fc00000-0x2ffeffff] page 4k

[ 0.000000] kernel direct mapping tables up to 0x2ffeffff @ [mem 0x00ff7000-0x00ffffff]

[ 0.000000] RAMDISK: [mem 0x2f799000-0x2ffdffff]

[ 0.000000] ACPI: RSDP 000f72b0 00014 (v00 AWARD )

[ 0.000000] ACPI: RSDT 2fff3000 00028 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)

[ 0.000000] ACPI: FACP 2fff3040 00074 (v01 AWARD AWRDACPI 42302E31 AWRD 00000000)

[ 0.000000] ACPI: DSDT 2fff30c0 038D4 (v01 AWARD AWRDACPI 00001000 MSFT 0100000D)

[ 0.000000] ACPI: FACS 2fff0000 00040

[ 0.000000] 0MB HIGHMEM available.

[ 0.000000] 767MB LOWMEM available.

[ 0.000000] mapped low ram: 0 - 2fff0000

[ 0.000000] low ram: 0 - 2fff0000

[ 0.000000] Zone ranges:

[ 0.000000] DMA [mem 0x00010000-0x00ffffff]

[ 0.000000] Normal [mem 0x01000000-0x2ffeffff]

[ 0.000000] HighMem empty

[ 0.000000] Movable zone start for each node

[ 0.000000] Early memory node ranges

[ 0.000000] node 0: [mem 0x00010000-0x0009ffff]

[ 0.000000] node 0: [mem 0x00100000-0x2ffeffff]

[ 0.000000] On node 0 totalpages: 196480

[ 0.000000] free_area_init_node: node 0, pgdat c08bb700, node_mem_map ef199200

[ 0.000000] DMA zone: 32 pages used for memmap

[ 0.000000] DMA zone: 0 pages reserved

[ 0.000000] DMA zone: 3952 pages, LIFO batch:0

[ 0.000000] Normal zone: 1504 pages used for memmap

[ 0.000000] Normal zone: 190992 pages, LIFO batch:31

[ 0.000000] Using APIC driver default

[ 0.000000] ACPI: PM-Timer IO Port: 0x1008

[ 0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs

[ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic"

[ 0.000000] APIC: disable apic facility

[ 0.000000] APIC: switched to apic NOOP

[ 0.000000] nr_irqs_gsi: 16

[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000

[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000

[ 0.000000] e820: [mem 0x30000000-0xfebfffff] available for PCI devices

[ 0.000000] Booting paravirtualized kernel on bare hardware

[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1

[ 0.000000] PERCPU: Embedded 13 pages/cpu @ef18c000 s31616 r0 d21632 u53248

[ 0.000000] pcpu-alloc: s31616 r0 d21632 u53248 alloc=13*4096

[ 0.000000] pcpu-alloc: [0] 0

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 194944

[ 0.000000] Kernel command line: BOOT_IMAGE=linux root=UUID=0d0a9abd-5020-4967-acb9-b3263fa09261 splash quiet resume=UUID=7499d1d2-de82-415a-a1f2-866d355c8704 vga=788

[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)

[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)

[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)

[ 0.000000] __ex_table already sorted, skipping sort

[ 0.000000] Initializing CPU#0

[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)

[ 0.000000] Memory: 761180k/786368k available (5333k kernel code, 24740k reserved, 2646k data, 616k init, 0k highmem)

[ 0.000000] virtual kernel memory layout:

fixmap : 0xffab4000 - 0xfffff000 (5420 kB)

pkmap : 0xff400000 - 0xff800000 (4096 kB)

vmalloc : 0xf07f0000 - 0xff3fe000 ( 236 MB)

lowmem : 0xc0000000 - 0xefff0000 ( 767 MB)

.init : 0xc08cc000 - 0xc0966000 ( 616 kB)

.data : 0xc0635784 - 0xc08cb1c0 (2646 kB)

.text : 0xc0100000 - 0xc0635784 (5333 kB)

[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.

[ 0.000000] SLUB: Genslabs=15, HWalign=128, Order=0-3, MinObjects=0, CPUs=1, Nodes=1

[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=1.

[ 0.000000] NR_IRQS:4352 nr_irqs:256 16

[ 0.000000] CPU 0 irqstacks, hard=eec06000 soft=eec08000

[ 0.000000] Console: colour dummy device 80x25

[ 0.000000] console [tty0] enabled

[ 0.000000] tsc: Fast TSC calibration using PIT

[ 0.000000] tsc: Detected 2672.931 MHz processor

[ 0.002002] Calibrating delay loop (skipped), value calculated using timer frequency.. 5345.86 BogoMIPS (lpj=2672931)

[ 0.002008] pid_max: default: 32768 minimum: 301

[ 0.002057] Security Framework initialized

[ 0.002071] TOMOYO Linux initialized

[ 0.002096] Mount-cache hash table entries: 512

[ 0.002390] Initializing cgroup subsys cpuacct

[ 0.002396] Initializing cgroup subsys devices

[ 0.002400] Initializing cgroup subsys freezer

[ 0.002403] Initializing cgroup subsys net_cls

[ 0.002407] Initializing cgroup subsys blkio

[ 0.002451] CPU0: Hyper-Threading is disabled

[ 0.002457] mce: CPU supports 4 MCE banks

[ 0.002485] Last level iTLB entries: 4KB 128, 2MB 128, 4MB 128

Last level dTLB entries: 4KB 64, 2MB 0, 4MB 64

tlb_flushall_shift: 6

[ 0.017848] Freeing SMP alternatives: 36k freed

[ 0.019203] ACPI: Core revision 20121018

[ 0.021413] ACPI: setting ELCR to 0200 (from 1a28)

[ 0.022013] ftrace: allocating 21255 entries in 42 pages

[ 0.030208] smpboot: weird, boot CPU (#0) not listed by the BIOS

[ 0.030215] smpboot: SMP motherboard not detected

[ 0.030218] smpboot: Local APIC not detected. Using dummy APIC emulation.

[ 0.030220] smpboot: SMP disabled

[ 0.030223] Performance Events: Netburst events,

[ 0.030229] no APIC, boot with the "lapic" boot parameter to force-enable it.

[ 0.030231] no hardware sampling interrupt available.

[ 0.030237] Netburst P4/Xeon PMU driver.

[ 0.030241] ... version: 0

[ 0.030243] ... bit width: 40

[ 0.030245] ... generic registers: 18

[ 0.030247] ... value mask: 000000ffffffffff

[ 0.030249] ... max period: 0000007fffffffff

[ 0.030250] ... fixed-purpose events: 0

[ 0.030252] ... event mask: 000000000003ffff

[ 0.032849] Brought up 1 CPUs

[ 0.032857] smpboot: Total of 1 processors activated (5345.86 BogoMIPS)

[ 0.033184] devtmpfs: initialized

[ 0.033522] PM: Registering ACPI NVS region [mem 0x2fff0000-0x2fff2fff] (12288 bytes)

[ 0.034946] RTC time: 17:32:35, date: 11/16/13

[ 0.035038] NET: Registered protocol family 16

[ 0.035335] ACPI: bus type pci registered

[ 0.074963] PCI: PCI BIOS revision 2.10 entry at 0xfb400, last bus=1

[ 0.074966] PCI: Using configuration type 1 for base access

[ 0.076189] bio: create slab <bio-0> at 0

[ 0.076296] ACPI: Added _OSI(Module Device)

[ 0.076300] ACPI: Added _OSI(Processor Device)

[ 0.076302] ACPI: Added _OSI(3.0 _SCP Extensions)

[ 0.076305] ACPI: Added _OSI(Processor Aggregator Device)

[ 0.077012] ACPI: EC: Look up EC in DSDT

[ 0.080230] ACPI: Interpreter enabled

[ 0.080247] ACPI: (supports S0 S3 S4 S5)

[ 0.080271] ACPI: Using PIC for interrupt routing

[ 0.084618] ACPI: No dock devices found.

[ 0.084632] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug

[ 0.084712] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[ 0.084717] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]

[ 0.085080] pci_root PNP0A03:00: host bridge window [io 0x0000-0x047f] (ignored)

[ 0.085085] pci_root PNP0A03:00: host bridge window [io 0x0490-0x0cf7] (ignored)

[ 0.085088] pci_root PNP0A03:00: host bridge window [io 0x0d00-0x0fff] (ignored)

[ 0.085092] pci_root PNP0A03:00: host bridge window [io 0x1100-0xffff] (ignored)

[ 0.085095] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)

[ 0.085098] pci_root PNP0A03:00: host bridge window [mem 0x30000000-0xffee0000] (ignored)

[ 0.085102] PCI: root bus 00: using default resources

[ 0.085106] pci_root PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.

[ 0.085159] PCI host bridge to bus 0000:00

[ 0.085166] pci_bus 0000:00: root bus resource [bus 00-ff]

[ 0.085170] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]

[ 0.085174] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]

[ 0.085200] pci 0000:00:00.0: [1039:0648] type 00 class 0x060000

[ 0.085218] pci 0000:00:00.0: reg 10: [mem 0xd0000000-0xd7ffffff]

[ 0.085365] pci 0000:00:01.0: [1039:0001] type 01 class 0x060400

[ 0.085448] pci 0000:00:02.0: [1039:0008] type 00 class 0x060100

[ 0.085582] pci 0000:00:02.0: Enabling SiS 96x SMBus

[ 0.085617] pci 0000:00:02.1: [1039:0016] type 00 class 0x0c0500

[ 0.085706] pci 0000:00:02.1: reg 20: [io 0x10c0-0x10df]

[ 0.085787] pci 0000:00:02.3: [1039:7007] type 00 class 0x0c0010

[ 0.085821] pci 0000:00:02.3: reg 10: [mem 0xe2035000-0xe2035fff]

[ 0.085921] pci 0000:00:02.3: reg 30: [mem 0x00000000-0x0001ffff pref]

[ 0.085976] pci 0000:00:02.3: supports D1 D2

[ 0.085979] pci 0000:00:02.3: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.086031] pci 0000:00:02.5: [1039:5513] type 00 class 0x01018a

[ 0.086064] pci 0000:00:02.5: reg 10: [io 0x01f0-0x01f7]

[ 0.086082] pci 0000:00:02.5: reg 14: [io 0x03f4-0x03f7]

[ 0.086101] pci 0000:00:02.5: reg 18: [io 0x0170-0x0177]

[ 0.086120] pci 0000:00:02.5: reg 1c: [io 0x0374-0x0377]

[ 0.086139] pci 0000:00:02.5: reg 20: [io 0x4000-0x400f]

[ 0.086225] pci 0000:00:02.5: supports D2

[ 0.086228] pci 0000:00:02.5: PME# supported from D3cold

[ 0.086265] pci 0000:00:02.7: [1039:7012] type 00 class 0x040100

[ 0.086298] pci 0000:00:02.7: reg 10: [io 0xd400-0xd4ff]

[ 0.086318] pci 0000:00:02.7: reg 14: [io 0xd800-0xd87f]

[ 0.086451] pci 0000:00:02.7: supports D1 D2

[ 0.086454] pci 0000:00:02.7: PME# supported from D3hot D3cold

[ 0.086483] pci 0000:00:03.0: [1039:7001] type 00 class 0x0c0310

[ 0.086509] pci 0000:00:03.0: reg 10: [mem 0xe2030000-0xe2030fff]

[ 0.086636] pci 0000:00:03.1: [1039:7001] type 00 class 0x0c0310

[ 0.086662] pci 0000:00:03.1: reg 10: [mem 0xe2031000-0xe2031fff]

[ 0.086788] pci 0000:00:03.2: [1039:7001] type 00 class 0x0c0310

[ 0.086814] pci 0000:00:03.2: reg 10: [mem 0xe2032000-0xe2032fff]

[ 0.086947] pci 0000:00:03.3: [1039:7002] type 00 class 0x0c0320

[ 0.086980] pci 0000:00:03.3: reg 10: [mem 0xe2033000-0xe2033fff]

[ 0.087136] pci 0000:00:03.3: PME# supported from D0 D3hot D3cold

[ 0.087182] pci 0000:00:04.0: [1039:0900] type 00 class 0x020000

[ 0.087216] pci 0000:00:04.0: reg 10: [io 0xdc00-0xdcff]

[ 0.087235] pci 0000:00:04.0: reg 14: [mem 0xe2034000-0xe2034fff]

[ 0.087318] pci 0000:00:04.0: reg 30: [mem 0x00000000-0x0001ffff pref]

[ 0.087372] pci 0000:00:04.0: supports D1 D2

[ 0.087375] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.087420] pci 0000:00:08.0: [1106:3038] type 00 class 0x0c0300

[ 0.087516] pci 0000:00:08.0: reg 20: [io 0xfc00-0xfc1f]

[ 0.087601] pci 0000:00:08.0: supports D1 D2

[ 0.087604] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot

[ 0.087640] pci 0000:00:08.1: [1106:3038] type 00 class 0x0c0300

[ 0.087736] pci 0000:00:08.1: reg 20: [io 0xfc00-0xfc1f]

[ 0.087821] pci 0000:00:08.1: supports D1 D2

[ 0.087824] pci 0000:00:08.1: PME# supported from D0 D1 D2 D3hot

[ 0.087860] pci 0000:00:08.2: [1106:3104] type 00 class 0x0c0320

[ 0.087893] pci 0000:00:08.2: reg 10: [mem 0xe2020000-0xe202ffff]

[ 0.088051] pci 0000:00:08.2: supports D1 D2

[ 0.088054] pci 0000:00:08.2: PME# supported from D0 D1 D2 D3hot

[ 0.088173] pci 0000:01:00.0: [10de:0281] type 00 class 0x030000

[ 0.088199] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xe0ffffff]

[ 0.088213] pci 0000:01:00.0: reg 14: [mem 0xd8000000-0xdfffffff pref]

[ 0.088266] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]

[ 0.088369] pci 0000:00:01.0: PCI bridge to [bus 01]

[ 0.088381] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe1ffffff]

[ 0.088389] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff pref]

[ 0.088404] pci_bus 0000:00: on NUMA node 0

[ 0.088471] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM

[ 0.088475] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)

[ 0.089631] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)

[ 0.089708] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)

[ 0.089782] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)

[ 0.089855] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)

[ 0.089928] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *13

[ 0.090016] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)

[ 0.090088] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)

[ 0.090160] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)

[ 0.090325] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none

[ 0.090328] vgaarb: loaded

[ 0.090331] vgaarb: bridge control possible 0000:01:00.0

[ 0.090334] sta2x11_scr_init

[ 0.090346] sta2x11_apb_soc_regs_init

[ 0.090355] sta2x11_sctl_init

[ 0.090364] sta2x11_apbreg_init

[ 0.090508] SCSI subsystem initialized

[ 0.090513] ACPI: bus type scsi registered

[ 0.090592] libata version 3.00 loaded.

[ 0.090721] PCI: Using ACPI for IRQ routing

[ 0.090728] PCI: pci_cache_line_size set to 64 bytes

[ 0.090784] pci 0000:00:08.1: address space collision: [io 0xfc00-0xfc1f] conflicts with 0000:00:08.0 [io 0xfc00-0xfc1f]

[ 0.090834] e820: reserve RAM buffer [mem 0x2fff0000-0x2fffffff]

[ 0.090985] NetLabel: Initializing

[ 0.090988] NetLabel: domain hash size = 128

[ 0.090990] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.091023] NetLabel: unlabeled traffic allowed by default

[ 0.091093] Switching to clocksource pit

[ 0.100930] pnp: PnP ACPI init

[ 0.100967] ACPI: bus type pnp registered

[ 0.101268] system 00:00: [mem 0x000f0000-0x000f3fff] could not be reserved

[ 0.101273] system 00:00: [mem 0x000f4000-0x000f7fff] could not be reserved

[ 0.101277] system 00:00: [mem 0x000f8000-0x000fbfff] could not be reserved

[ 0.101281] system 00:00: [mem 0x000fc000-0x000fffff] could not be reserved

[ 0.101285] system 00:00: [mem 0x2fff0000-0x2fffffff] could not be reserved

[ 0.101289] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved

[ 0.101292] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved

[ 0.101296] system 00:00: [mem 0x00100000-0x2ffeffff] could not be reserved

[ 0.101300] system 00:00: [mem 0xffee0000-0xffefffff] has been reserved

[ 0.101304] system 00:00: [mem 0xfffe0000-0xfffeffff] has been reserved

[ 0.101308] system 00:00: [mem 0xfec00000-0xfecfffff] could not be reserved

[ 0.101312] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved

[ 0.101320] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)

[ 0.101617] pnp 00:01: disabling [io 0x0010-0x001f] because it overlaps 0000:00:08.1 BAR 4 [io 0x0000-0x001f]

[ 0.101651] system 00:01: [io 0x04d0-0x04d1] has been reserved

[ 0.101655] system 00:01: [io 0x0294-0x0297] has been reserved

[ 0.101660] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.101678] pnp 00:02: [dma 4]

[ 0.101718] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)

[ 0.101764] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)

[ 0.101803] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)

[ 0.101841] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)

[ 0.102022] pnp 00:06: [dma 2]

[ 0.102074] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active)

[ 0.102338] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)

[ 0.102712] pnp 00:08: [dma 3]

[ 0.102781] pnp 00:08: Plug and Play ACPI device, IDs PNP0401 (active)

[ 0.102924] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.103204] pnp 00:0a: Plug and Play ACPI device, IDs PNPb02f (active)

[ 0.103450] pnp 00:0b: Plug and Play ACPI device, IDs PNPb006 (active)

[ 0.103463] pnp: PnP ACPI: found 12 devices

[ 0.103466] ACPI: ACPI bus type pnp unregistered

[ 0.103469] PnPBIOS: Disabled

[ 0.140273] Switching to clocksource acpi_pm

[ 0.140340] pci 0000:00:02.3: BAR 6: assigned [mem 0x30000000-0x3001ffff pref]

[ 0.140347] pci 0000:00:04.0: BAR 6: assigned [mem 0x30020000-0x3003ffff pref]

[ 0.140352] pci 0000:00:08.1: BAR 4: assigned [io 0x1000-0x101f]

[ 0.140361] pci 0000:00:08.1: BAR 4: error updating (0x001001 != 0x00fc01)

[ 0.140373] pci 0000:01:00.0: BAR 6: assigned [mem 0xe1000000-0xe101ffff pref]

[ 0.140377] pci 0000:00:01.0: PCI bridge to [bus 01]

[ 0.140388] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xe1ffffff]

[ 0.140395] pci 0000:00:01.0: bridge window [mem 0xd8000000-0xdfffffff pref]

[ 0.140422] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]

[ 0.140426] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]

[ 0.140430] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xe1ffffff]

[ 0.140433] pci_bus 0000:01: resource 2 [mem 0xd8000000-0xdfffffff pref]

[ 0.140494] NET: Registered protocol family 2

[ 0.140697] TCP established hash table entries: 8192 (order: 4, 65536 bytes)

[ 0.140749] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)

[ 0.140800] TCP: Hash tables configured (established 8192 bind 8192)

[ 0.140920] TCP: reno registered

[ 0.140925] UDP hash table entries: 512 (order: 2, 16384 bytes)

[ 0.140939] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)

[ 0.141053] NET: Registered protocol family 1

[ 0.141272] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11

[ 0.141277] PCI: setting IRQ 11 as level-triggered

[ 0.215157] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 12

[ 0.215160] PCI: setting IRQ 12 as level-triggered

[ 0.289147] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11

[ 0.363144] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 9

[ 0.363148] PCI: setting IRQ 9 as level-triggered

[ 0.363273] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12

[ 0.363397] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11

[ 0.363517] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3

[ 0.363519] PCI: setting IRQ 3 as level-triggered

[ 0.363575] pci 0000:01:00.0: Boot video device

[ 0.363581] PCI: CLS 32 bytes, default 64

[ 0.363673] Trying to unpack rootfs image as initramfs...

[ 0.513756] Freeing initrd memory: 8476k freed

[ 0.528700] sta2x11_mfd_init

[ 0.528939] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)

[ 0.528945] apm: overridden by ACPI.

[ 0.529348] audit: initializing netlink socket (disabled)

[ 0.529376] type=2000 audit(1384623155.528:1): initialized

[ 0.549412] HugeTLB registered 4 MB page size, pre-allocated 0 pages

[ 0.551485] VFS: Disk quotas dquot_6.5.2

[ 0.551555] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)

[ 0.552433] Btrfs loaded

[ 0.552447] msgmni has been set to 1503

[ 0.552848] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[ 0.552893] io scheduler noop registered

[ 0.552896] io scheduler deadline registered

[ 0.552907] io scheduler cfq registered (default)

[ 0.553171] vesafb: mode is 800x600x16, linelength=1600, pages=2

[ 0.553175] vesafb: protected mode interface info at c000:def0

[ 0.553179] vesafb: pmi: set display start = c00cdf35, set palette = c00cdfba

[ 0.553181] vesafb: pmi: ports = b4c3 b503 ba03 c003 c103 c403 c503 c603 c703 c803 c903 cc03 ce03 cf03 d003 d103 d203 d303 d403 d503 da03 ff03

[ 0.553201] vesafb: scrolling: redraw

[ 0.553205] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0

[ 0.553404] vesafb: framebuffer at 0xd8000000, mapped to 0xf0880000, using 1875k, total 131072k

[ 0.570288] Console: switching to colour frame buffer device 100x37

[ 0.586894] fb0: VESA VGA frame buffer device

[ 0.586978] GHES: HEST is not enabled!

[ 0.587125] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 0.607749] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 0.607788] isapnp: Scanning for PnP cards...

[ 0.657760] Linux agpgart interface v0.103

[ 0.657870] agpgart-sis 0000:00:00.0: SiS chipset [1039/0648]

[ 0.665854] agpgart-sis 0000:00:00.0: AGP aperture is 128M @ 0xd0000000

[ 0.667737] brd: module loaded

[ 0.667979] i8042: PNP: No PS/2 controller found. Probing ports directly.

[ 0.705025] i8042: Failed to disable AUX port, but continuing anyway... Is this a SiS?

[ 0.705029] i8042: If AUX port is really absent please use the 'i8042.noaux' option

[ 0.968624] isapnp: No Plug & Play device found

[ 1.086112] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 1.086229] mousedev: PS/2 mouse device common for all mice

[ 1.086403] rtc_cmos 00:03: RTC can wake from S4

[ 1.086574] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0

[ 1.086598] rtc0: alarms up to one year, 242 bytes nvram

[ 1.086632] cpuidle: using governor ladder

[ 1.086635] cpuidle: using governor menu

[ 1.086639] ledtrig-cpu: registered to indicate activity on CPUs

[ 1.086958] TCP: cubic registered

[ 1.086975] Key type dns_resolver registered

[ 1.087215] Using IPI No-Shortcut mode

[ 1.087319] PM: Checking hibernation image partition UUID=7499d1d2-de82-415a-a1f2-866d355c8704

[ 1.214956] PM: Hibernation image not present or could not be loaded.

[ 1.214980] registered taskstats version 1

[ 1.215448] Magic number: 5:514:542

[ 1.215554] rtc_cmos 00:03: setting system clock to 2013-11-16 17:32:36 UTC (1384623156)

[ 1.215558] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found

[ 1.215721] Freeing unused kernel memory: 616k freed

[ 1.216583] Write protecting the kernel text: 5336k

[ 1.216615] Write protecting the kernel read-only data: 2212k

[ 1.263244] dracut: dracut-3 dracut-025-

[ 1.272247] pata_sis 0000:00:02.5: version 0.5.2

[ 1.272305] pata_sis 0000:00:02.5: SiS 962/963 MuTIOL IDE UDMA133 controller

[ 1.272722] scsi0 : pata_sis

[ 1.273265] scsi1 : pata_sis

[ 1.273604] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4000 irq 14

[ 1.273608] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4008 irq 15

[ 1.530039] tsc: Refined TSC clocksource calibration: 2672.726 MHz

[ 1.530046] Switching to clocksource tsc

[ 1.596460] ata1.00: ATA-6: ST3120022A, 3.04, max UDMA/100

[ 1.596465] ata1.00: 234441648 sectors, multi 16: LBA48

[ 1.596479] ata1.01: ATAPI: JLMS DVD-ROM LTD-165H, CH0U, max UDMA/44

[ 1.602449] ata1.00: configured for UDMA/100

[ 1.602909] ata1.01: configured for UDMA/44

[ 1.603260] scsi 0:0:0:0: Direct-Access ATA ST3120022A 3.04 PQ: 0 ANSI: 5

[ 1.603816] scsi 0:0:1:0: CD-ROM JLMS DVD-ROM LTD-165H CH0U PQ: 0 ANSI: 5

[ 1.604191] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)

[ 1.604260] sd 0:0:0:0: [sda] Write Protect is off

[ 1.604265] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 1.604294] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.621846] sda: sda1 sda2 < sda5 sda6 >

[ 1.622368] sd 0:0:0:0: [sda] Attached SCSI disk

[ 1.758356] ata2.00: ATAPI: SONY CD-RW CRX210E1, 2YS1, max UDMA/33

[ 1.780299] ata2.00: configured for UDMA/33

[ 1.793706] scsi 1:0:0:0: CD-ROM SONY CD-RW CRX210E1 2YS1 PQ: 0 ANSI: 5

[ 1.876080] systemd-udevd[117]: starting version 195

[ 1.991542] [drm] Initialized drm 1.1.0 20060810

[ 2.012837] wmi: Mapper loaded

[ 2.020484] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0

[ 2.020498] ACPI: Power Button [PWRB]

[ 2.021339] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1

[ 2.021353] ACPI: Sleep Button [FUTS]

[ 2.022191] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2

[ 2.022202] ACPI: Power Button [PWRF]

[ 2.113817] checking generic (d8000000 8000000) vs hw (d8000000 8000000)

[ 2.113825] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver

[ 2.113859] Console: switching to colour dummy device 80x25

[ 2.115228] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x028100a1

[ 2.115234] nouveau [ DEVICE][0000:01:00.0] Chipset: NV28 (NV28)

[ 2.115238] nouveau [ DEVICE][0000:01:00.0] Family : NV20

[ 2.116865] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...

[ 2.151549] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid

[ 2.151553] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN

[ 2.151557] nouveau [ VBIOS][0000:01:00.0] BMP version 5.15

[ 2.151681] nouveau [ VBIOS][0000:01:00.0] version 04.28.20.05.00

[ 2.152039] nouveau W[ PTIMER][0000:01:00.0] unknown input clock freq

[ 2.152048] nouveau [ PFB][0000:01:00.0] RAM type: SDRAM

[ 2.152051] nouveau [ PFB][0000:01:00.0] RAM size: 128 MiB

[ 2.152054] nouveau [ PFB][0000:01:00.0] ZCOMP: 49152 tags

[ 2.155271] agpgart-sis 0000:00:00.0: AGP 3.0 bridge

[ 2.155292] agpgart: systemd-udevd tried to set rate=x12. Setting to AGP3 x8 mode.

[ 2.155303] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:00:00.0 into 8x mode

[ 2.155308] agpgart-sis 0000:00:00.0: SiS delay workaround: giving bridge time to recover

[ 2.166137] agpgart-sis 0000:00:00.0: putting AGP V3 device at 0000:01:00.0 into 8x mode

[ 2.166221] [TTM] Zone kernel: Available graphics memory: 385154 kiB

[ 2.166224] [TTM] Initializing pool allocator

[ 2.166230] [TTM] Initializing DMA pool allocator

[ 2.166439] nouveau [ DRM] VRAM: 127 MiB

[ 2.166446] nouveau [ DRM] GART: 128 MiB

[ 2.166557] nouveau [ DRM] BMP BIOS found

[ 2.166560] nouveau [ DRM] BMP version 5.21

[ 2.166564] nouveau [ DRM] Bios version 04.28.20.05

[ 2.166568] nouveau [ DRM] DCB version 2.0

[ 2.166572] nouveau [ DRM] DCB outp 00: 02000310 000088b8

[ 2.166576] nouveau [ DRM] DCB outp 01: 01010300 000088b8

[ 2.166579] nouveau [ DRM] DCB outp 02: 01120321 00000032

[ 2.169055] nouveau W[ DRM] TV-1 has no encoders, removing

[ 2.170089] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).

[ 2.170093] [drm] No driver support for vblank timestamp query.

[ 2.170642] nouveau [ DRM] 1 available performance level(s)

[ 2.170647] nouveau [ DRM] 0: memory 444MHz

[ 2.170651] nouveau [ DRM] c: core 225MHz memory 405MHz

[ 2.172437] nouveau [ DRM] MM: using M2MF for buffer copies

[ 2.236509] nouveau [ DRM] allocated 1360x768 fb: 0x9000, bo eda09800

[ 2.236735] fbcon: nouveaufb (fb0) is primary device

[ 2.298480] Console: switching to colour frame buffer device 170x48

[ 2.299895] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device

[ 2.299899] nouveau 0000:01:00.0: registered panic notifier

[ 2.299907] [drm] Initialized nouveau 1.1.0 20120801 for 0000:01:00.0 on minor 0

[ 2.304697] dracut: Starting plymouth daemon

[ 6.349202] sr0: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray

[ 6.349211] cdrom: Uniform CD-ROM driver Revision: 3.20

[ 6.349995] sr 0:0:1:0: Attached scsi CD-ROM sr0

[ 6.374038] sr1: scsi3-mmc drive: 239x/40x writer cd/rw xa/form2 cdda tray

[ 6.374260] sr 1:0:0:0: Attached scsi CD-ROM sr1

[ 6.555137] firewire_ohci 0000:00:02.3: added OHCI v1.0 device as card 0, 4 IR + 6 IT contexts, quirks 0x0

[ 6.688448] ACPI: bus type usb registered

[ 6.688496] usbcore: registered new interface driver usbfs

[ 6.688514] usbcore: registered new interface driver hub

[ 6.691280] usbcore: registered new device driver usb

[ 6.736338] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 6.736438] ohci_hcd 0000:00:03.0: OHCI Host Controller

[ 6.736450] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1

[ 6.736476] ohci_hcd 0000:00:03.0: irq 11, io mem 0xe2030000

[ 6.749797] uhci_hcd: USB Universal Host Controller Interface driver

[ 6.758577] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 6.758584] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after

[ 6.768555] ehci-pci: EHCI PCI platform driver

[ 6.789380] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001

[ 6.789387] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.789466] usb usb1: Product: OHCI Host Controller

[ 6.789469] usb usb1: Manufacturer: Linux 3.8.13.4-desktop-1.mga3 ohci_hcd

[ 6.789472] usb usb1: SerialNumber: 0000:00:03.0

[ 6.789898] hub 1-0:1.0: USB hub found

[ 6.790179] hub 1-0:1.0: 2 ports detected

[ 6.790633] uhci_hcd 0000:00:08.0: UHCI Host Controller

[ 6.790644] uhci_hcd 0000:00:08.0: new USB bus registered, assigned bus number 2

[ 6.790719] uhci_hcd 0000:00:08.0: irq 12, io base 0x0000fc00

[ 6.790758] uhci_hcd 0000:00:08.0: host system error, PCI problems?

[ 6.790763] uhci_hcd 0000:00:08.0: host controller halted, very bad!

[ 6.790778] uhci_hcd 0000:00:08.0: HC died; cleaning up

[ 6.790798] uhci_hcd 0000:00:08.0: USB bus 2 deregistered

[ 6.790814] uhci_hcd 0000:00:08.0: init 0000:00:08.0 fail, -108

[ 6.790820] uhci_hcd: probe of 0000:00:08.0 failed with error -108

[ 6.790846] uhci_hcd 0000:00:08.1: init 0000:00:08.1 fail, -16

[ 6.790850] uhci_hcd: probe of 0000:00:08.1 failed with error -16

[ 6.791922] ohci_hcd 0000:00:03.1: OHCI Host Controller

[ 6.791936] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2

[ 6.791966] ohci_hcd 0000:00:03.1: irq 12, io mem 0xe2031000

[ 6.844077] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[ 6.844084] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.844088] usb usb2: Product: OHCI Host Controller

[ 6.844091] usb usb2: Manufacturer: Linux 3.8.13.4-desktop-1.mga3 ohci_hcd

[ 6.844095] usb usb2: SerialNumber: 0000:00:03.1

[ 6.844469] hub 2-0:1.0: USB hub found

[ 6.844480] hub 2-0:1.0: 2 ports detected

[ 6.844656] ehci-pci 0000:00:03.3: EHCI Host Controller

[ 6.844666] ehci-pci 0000:00:03.3: new USB bus registered, assigned bus number 3

[ 6.844731] ehci-pci 0000:00:03.3: irq 9, io mem 0xe2033000

[ 6.850035] ehci-pci 0000:00:03.3: USB 2.0 started, EHCI 1.00

[ 6.850103] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002

[ 6.850107] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.850110] usb usb3: Product: EHCI Host Controller

[ 6.850113] usb usb3: Manufacturer: Linux 3.8.13.4-desktop-1.mga3 ehci_hcd

[ 6.850116] usb usb3: SerialNumber: 0000:00:03.3

[ 6.850311] hub 3-0:1.0: USB hub found

[ 6.850320] hub 3-0:1.0: 6 ports detected

[ 6.850580] ehci-pci 0000:00:08.2: EHCI Host Controller

[ 6.850591] ehci-pci 0000:00:08.2: new USB bus registered, assigned bus number 4

[ 6.850656] ehci-pci 0000:00:08.2: irq 3, io mem 0xe2020000

[ 6.856096] ehci-pci 0000:00:08.2: USB 2.0 started, EHCI 1.00

[ 6.856160] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002

[ 6.856165] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.856168] usb usb4: Product: EHCI Host Controller

[ 6.856172] usb usb4: Manufacturer: Linux 3.8.13.4-desktop-1.mga3 ehci_hcd

[ 6.856175] usb usb4: SerialNumber: 0000:00:08.2

[ 6.856883] hub 4-0:1.0: USB hub found

[ 6.856896] hub 4-0:1.0: 4 ports detected

[ 6.857831] ohci_hcd 0000:00:03.2: OHCI Host Controller

[ 6.857844] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 5

[ 6.857872] ohci_hcd 0000:00:03.2: irq 11, io mem 0xe2032000

[ 6.910077] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001

[ 6.910084] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 6.910088] usb usb5: Product: OHCI Host Controller

[ 6.910091] usb usb5: Manufacturer: Linux 3.8.13.4-desktop-1.mga3 ohci_hcd

[ 6.910095] usb usb5: SerialNumber: 0000:00:03.2

[ 6.910485] hub 5-0:1.0: USB hub found

[ 6.910496] hub 5-0:1.0: 2 ports detected

[ 7.056183] firewire_core 0000:00:02.3: created device fw0: GUID 000010dc000bf273, S400

[ 7.470415] PM: Marking nosave pages: [mem 0x000a0000-0x000fffff]

[ 7.470423] PM: Basic memory bitmaps created

[ 7.477311] PM: Basic memory bitmaps freed

[ 7.482881] PM: Starting manual resume from disk

[ 7.482891] PM: Hibernation image partition 8:5 present

[ 7.482893] PM: Looking for hibernation image.

[ 7.520250] PM: Image not found (code -22)

[ 7.520256] PM: Hibernation image not present or could not be loaded.

[ 7.598414] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)

[ 7.668139] dracut: Checking ext4: /dev/disk/by-uuid/0d0a9abd-5020-4967-acb9-b3263fa09261

[ 7.668220] dracut: issuing e2fsck -a /dev/disk/by-uuid/0d0a9abd-5020-4967-acb9-b3263fa09261

[ 7.733846] dracut: /dev/disk/by-uuid/0d0a9abd-5020-4967-acb9-b3263fa09261: clean, 93585/788416 files, 736354/3148484 blocks

[ 7.736417] dracut: Mounting /dev/disk/by-uuid/0d0a9abd-5020-4967-acb9-b3263fa09261 with -o acl,relatime

[ 7.869542] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl

[ 7.906591] dracut: Mounted root filesystem /dev/sda1

[ 8.066497] dracut: Switching root

[ 8.068442] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.

[ 8.601954] systemd[1]: systemd 195 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; mageia)

[ 8.819079] systemd[1]: Inserted module 'autofs4'

[ 8.833264] systemd[1]: Set hostname to <localhost>.

[ 9.800769] systemd[1]: Starting Replay Read-Ahead Data...

[ 9.801957] systemd[1]: Starting Collect Read-Ahead Data...

[ 9.805074] systemd[1]: Starting Login Prompts.

[ 9.805296] systemd[1]: Reached target Login Prompts.

[ 9.805349] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.

[ 9.805529] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[ 9.805554] systemd[1]: Starting RPC Port Mapper.

[ 9.805722] systemd[1]: Reached target RPC Port Mapper.

[ 9.805755] systemd[1]: Starting Remote File Systems.

[ 9.805900] systemd[1]: Reached target Remote File Systems.

[ 9.805948] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.

[ 9.806227] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.

[ 9.806266] systemd[1]: Starting Delayed Shutdown Socket.

[ 9.806476] systemd[1]: Listening on Delayed Shutdown Socket.

[ 9.806549] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.

[ 9.806899] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

[ 9.806942] systemd[1]: Starting Encrypted Volumes.

[ 9.808144] systemd[1]: Reached target Encrypted Volumes.

[ 9.808191] systemd[1]: Expecting device dev-disk-byx2duuid-7499d1d2x2dde82x2d415ax2da1f2x2d866d355c8704.device...

[ 9.808474] systemd[1]: Starting udev Kernel Socket.

[ 9.808695] systemd[1]: Listening on udev Kernel Socket.

[ 9.808848] systemd[1]: Starting udev Control Socket.

[ 9.809129] systemd[1]: Listening on udev Control Socket.

[ 9.809176] systemd[1]: Expecting device dev-disk-byx2duuid-ea2c3543x2d7894x2d4a0fx2db0ecx2dafc86251fb8a.device...

[ 9.809325] systemd[1]: Starting Journal Socket.

[ 9.809604] systemd[1]: Listening on Journal Socket.

[ 9.809702] systemd[1]: Started Import network configuration from initramfs.

[ 9.809731] systemd[1]: Starting Configure read-only root support...

[ 9.810784] systemd[1]: Mounting Debug File System...

[ 9.812719] systemd[1]: Starting Set default kernel console loglevel...

[ 9.820947] systemd-readahead[309]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.

[ 10.204389] systemd[1]: Starting udev Kernel Device Manager...

[ 10.207385] systemd[1]: Mounting Huge Pages File System...

[ 10.208461] systemd[1]: Starting udev Coldplug all Devices...

[ 10.211960] systemd[1]: Starting Journal Service...

[ 10.214591] systemd[1]: Started Journal Service.

[ 10.215677] systemd[1]: Mounting POSIX Message Queue File System...

[ 11.175061] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 11.281545] systemd-udevd[314]: starting version 195

[ 12.407210] EXT4-fs (sda1): re-mounted. Opts: acl

[ 13.115426] p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available

[ 13.681635] thermal LNXTHERM:00: registered as thermal_zone0

[ 13.681643] ACPI: Thermal Zone [THRM] (27 C)

[ 13.715304] ACPI: Fan [FAN] (on)

[ 13.769458] gameport gameport0: NS558 PnP Gameport is pnp00:0a/gameport0, io 0x201, speed 764kHz

[ 13.889341] sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x10c0

[ 13.892062] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 13.898496] microcode: CPU0 sig=0xf27, pf=0x4, revision=0x24

[ 14.014684] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

[ 14.100752] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 14.118257] sis900.c: v1.08.10 Apr. 2 2006

[ 14.120002] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.

[ 14.132565] 0000:00:04.0: Using transceiver found at address 1 as default

[ 14.134260] eth0: SiS 900 PCI Fast Ethernet at 0x0001dc00, IRQ 12, 00:10:dc:77:b0:10

[ 14.261912] parport_pc 00:08: reported by Plug and Play ACPI

[ 14.262066] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]

[ 14.351534] ppdev: user-space parallel port driver

[ 14.864860] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5

[ 14.864867] PCI: setting IRQ 5 as level-triggered

[ 15.096079] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 15.180249] intel8x0_measure_ac97_clock: measured 51089 usecs (2458 samples)

[ 15.180256] intel8x0: clocking to 48000

[ 15.450448] Adding 4087272k swap on /dev/sda5. Priority:-1 extents:1 across:4087272k

[ 18.049889] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl

[ 18.127208] systemd-journald[317]: Received SIGUSR1

[ 19.017047] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 22.938033] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 22.938053] hub 4-0:1.0: unable to enumerate USB device on port 1

[ 26.877045] hub 4-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?

[ 30.798048] hub 4-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?

[ 34.719063] hub 4-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?

[ 38.640045] hub 4-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?

[ 38.640064] hub 4-0:1.0: unable to enumerate USB device on port 4

[ 39.127044] usb 2-1: new full-speed USB device number 2 using ohci_hcd

[ 39.319697] usb 2-1: New USB device found, idVendor=0db0, idProduct=6982

[ 39.319704] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 39.319707] usb 2-1: Product: Medion Flash XL V2.6D

[ 39.319711] usb 2-1: Manufacturer: MEDION

[ 39.319714] usb 2-1: SerialNumber: 2002-78

[ 39.350157] Initializing USB Mass Storage driver...

[ 39.350341] scsi2 : usb-storage 2-1:1.0

[ 39.350999] usbcore: registered new interface driver usb-storage

[ 39.351050] USB Mass Storage support registered.

[ 39.589045] usb 2-2: new low-speed USB device number 3 using ohci_hcd

[ 39.780620] usb 2-2: New USB device found, idVendor=046d, idProduct=c03d

[ 39.780627] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 39.780631] usb 2-2: Product: USB-PS/2 Optical Mouse

[ 39.780634] usb 2-2: Manufacturer: Logitech

[ 39.817268] usbcore: registered new interface driver usbhid

[ 39.817275] usbhid: USB HID core driver

[ 39.822771] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:03.1/usb2/2-2/2-2:1.0/input/input3

[ 39.827261] hid-generic 0003:046D:C03D.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:03.1-2/input0

[ 39.941052] usb 5-1: new low-speed USB device number 2 using ohci_hcd

[ 40.132582] usb 5-1: New USB device found, idVendor=046d, idProduct=c315

[ 40.132590] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0

[ 40.132593] usb 5-1: Product: Logitech USB Keyboard

[ 40.132597] usb 5-1: Manufacturer: Logitech

[ 40.144462] input: Logitech Logitech USB Keyboard as /devices/pci0000:00/0000:00:03.2/usb5/5-1/5-1:1.0/input/input4

[ 40.144638] hid-generic 0003:046D:C315.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech Logitech USB Keyboard] on usb-0000:00:03.2-1/input0

[ 40.392604] scsi 2:0:0:0: Direct-Access Medion Flash XL CF 2.6D PQ: 0 ANSI: 0 CCS

[ 40.410593] scsi 2:0:0:1: Direct-Access Medion Flash XL MS 2.6D PQ: 0 ANSI: 0 CCS

[ 40.439592] scsi 2:0:0:2: Direct-Access Medion Flash XL MMC/SD 2.6D PQ: 0 ANSI: 0 CCS

[ 40.479587] scsi 2:0:0:3: Direct-Access Medion Flash XL SM 2.6D PQ: 0 ANSI: 0 CCS

[ 40.798514] sd 2:0:0:0: [sdb] Attached SCSI removable disk

[ 40.809489] sd 2:0:0:1: [sdc] Attached SCSI removable disk

[ 40.842494] sd 2:0:0:2: [sdd] Attached SCSI removable disk

[ 40.864496] sd 2:0:0:3: [sde] Attached SCSI removable disk

[ 41.166900] ondemand governor failed, too long transition latency of HW, fallback to performance governor

[ 41.701863] NET: Registered protocol family 10

[ 42.286022] microcode: CPU0 updated to revision 0x37, date = 2003-06-04

[ 42.305151] microcode: Microcode Update Driver: v2.00 removed.

[ 45.953207] eth0: Media Link On 100mbps full-duplex

[ 47.322057] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 48.198792] NET: Registered protocol family 17

[ 50.044096] ip_tables: (C) 2000-2006 Netfilter Core Team

[ 50.047356] ip6_tables: (C) 2000-2006 Netfilter Core Team

[ 51.243080] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 51.454149] Netfilter messages via NETLINK v0.30.

[ 51.508886] nf_conntrack version 0.5.0 (12036 buckets, 48144 max)

[ 51.865863] NF_TPROXY: Transparent proxy support initialized, version 4.1.0

[ 51.865869] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

[ 51.896696] xt_time: kernel timezone is +0100

[ 51.990175] ctnetlink v0.93: registering with nfnetlink.

[ 52.124795] ip_set: protocol 6

[ 52.306502] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully

[ 53.049071] xt_addrtype: ipv6 does not support BROADCAST matching

[ 53.743095] xt_CT: No such helper "pptp"

[ 53.804383] xt_CT: No such helper "snmp"

[ 53.837374] xt_CT: No such helper "netbios-ns"

[ 53.886724] xt_CT: No such helper "irc"

[ 53.913595] xt_CT: No such helper "irc-0"

[ 54.389448] Bridge firewalling registered

[ 54.989881] u32 classifier

[ 54.989887] Actions configured

[ 55.164073] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 55.317140] netfilter PSD loaded - (c) astaro AG

[ 55.323484] IFWLOG: register target

[ 56.554284] systemd-journald[317]: File /var/log/journal/4d41bdfa46bb46c882478515c6ad9662/user-500.journal corrupted or uncleanly shut down, renaming and replacing.

[ 59.085060] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 59.085080] hub 4-0:1.0: unable to enumerate USB device on port 1

[ 63.024089] hub 4-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?

[ 66.945060] hub 4-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?

[ 70.866045] hub 4-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?

[ 74.787052] hub 4-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?

[ 74.787071] hub 4-0:1.0: unable to enumerate USB device on port 4

[ 78.734053] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 82.655043] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 86.576048] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 90.497044] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 90.497064] hub 4-0:1.0: unable to enumerate USB device on port 1

[ 94.436045] hub 4-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?

[ 98.357048] hub 4-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?

[ 102.278045] hub 4-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?

[ 106.199044] hub 4-0:1.0: Cannot enable port 4. Maybe the USB cable is bad?

[ 106.199064] hub 4-0:1.0: unable to enumerate USB device on port 4

[ 727.924063] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 731.845051] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 735.766055] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 739.687051] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 739.687071] hub 4-0:1.0: unable to enumerate USB device on port 1

[ 743.626052] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 747.547055] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 751.468051] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 755.389040] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 755.389059] hub 4-0:1.0: unable to enumerate USB device on port 3

[ 755.875048] usb 1-1: new full-speed USB device number 2 using ohci_hcd

[ 756.087071] usb 1-1: New USB device found, idVendor=03f0, idProduct=0004

[ 756.087078] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 756.087082] usb 1-1: Product: DeskJet 895C

[ 756.087086] usb 1-1: Manufacturer: Hewlett-Packard

[ 756.087089] usb 1-1: SerialNumber: MX91A1V062FB

[ 756.148200] usblp0: Disabling reads from problematic bidirectional printer

[ 756.158373] usblp 1-1:1.0: usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004

[ 756.158492] usbcore: registered new interface driver usblp

[ 759.131635] usblp0: removed

[ 759.152681] usblp0: Disabling reads from problematic bidirectional printer

[ 759.167118] usblp 1-1:1.0: usblp0: USB Unidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x0004

[ 763.137068] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 767.058063] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 770.979062] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 774.901045] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 774.901067] hub 4-0:1.0: unable to enumerate USB device on port 1

[ 778.840054] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 782.761051] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 786.682051] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 790.603058] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 790.603078] hub 4-0:1.0: unable to enumerate USB device on port 3

[ 849.090052] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 853.011053] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 856.932060] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 860.853051] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 860.853071] hub 4-0:1.0: unable to enumerate USB device on port 1

[ 864.792047] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 868.713051] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 872.634051] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 876.555050] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 876.555070] hub 4-0:1.0: unable to enumerate USB device on port 3

[ 880.500054] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 884.421061] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 888.342053] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 892.263069] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 892.263089] hub 4-0:1.0: unable to enumerate USB device on port 1

[ 896.202062] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 900.123056] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 904.044052] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 907.965055] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 907.965075] hub 4-0:1.0: unable to enumerate USB device on port 3

[ 912.006074] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 915.927050] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 919.848064] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 923.769048] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 923.769067] hub 4-0:1.0: unable to enumerate USB device on port 1

[ 927.708050] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 931.629050] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 935.550054] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 939.471055] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 939.471076] hub 4-0:1.0: unable to enumerate USB device on port 3

[ 943.416052] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 947.337057] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 951.258053] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 955.179051] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 955.179071] hub 4-0:1.0: unable to enumerate USB device on port 1

[ 959.118055] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 963.039052] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 966.960061] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 970.881050] hub 4-0:1.0: Cannot enable port 3. Maybe the USB cable is bad?

[ 970.881070] hub 4-0:1.0: unable to enumerate USB device on port 3

[ 1214.985045] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 1218.906046] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 1222.827058] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 1226.748059] hub 4-0:1.0: Cannot enable port 1. Maybe the USB cable is bad?

[ 1226.748078] hub 4-0:1.0: unable to enumerate USB device on port 1

[maison@localhost ~]$

[maison@localhost ~]$ lspci

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 645xx (rev 02)

00:01.0 PCI bridge: Silicon Integrated Systems [SiS] AGP Port (virtual PCI-to-PCI bridge)

00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] LPC Controller (rev 04)

00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2/3 SMBus controller

00:02.3 FireWire (IEEE 1394): Silicon Integrated Systems [SiS] FireWire Controller

00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 IDE Controller

00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] SiS7012 AC'97 Sound Controller (rev a0)

00:03.0 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)

00:03.1 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)

00:03.2 USB controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)

00:03.3 USB controller: Silicon Integrated Systems [SiS] USB 2.0 Controller

00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)

00:08.0 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62)

00:08.1 USB controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 62)

00:08.2 USB controller: VIA Technologies, Inc. USB 2.0 (rev 65)

01:00.0 VGA compatible controller: NVIDIA Corporation NV28 [GeForce4 Ti 4200 AGP 8x] (rev a1)

[maison@localhost ~]$

[maison@localhost ~]$ root

bash: root : commande introuvable

[maison@localhost ~]$ su

Mot de passe :

[root@localhost maison]# cat /proc/interrupts

CPU0

0: 76819 XT-PIC-XT-PIC timer

1: 4 XT-PIC-XT-PIC i8042

2: 0 XT-PIC-XT-PIC cascade

3: 2 XT-PIC-XT-PIC firewire_ohci, ehci_hcd:usb5

5: 55 XT-PIC-XT-PIC snd_intel8x0

7: 1 XT-PIC-XT-PIC parport0

8: 0 XT-PIC-XT-PIC rtc0

9: 5 XT-PIC-XT-PIC acpi, ehci_hcd:usb4

10: 0 XT-PIC-XT-PIC MPU401 UART

11: 745 XT-PIC-XT-PIC nouveau, ohci_hcd:usb1, ohci_hcd:usb3

12: 8353 XT-PIC-XT-PIC ohci_hcd:usb2, eth0

14: 7134 XT-PIC-XT-PIC pata_sis

15: 247 XT-PIC-XT-PIC pata_sis

NMI: 0 Non-maskable interrupts

LOC: 0 Local timer interrupts

SPU: 0 Spurious interrupts

PMI: 0 Performance monitoring interrupts

IWI: 0 IRQ work interrupts

RTR: 0 APIC ICR read retries

RES: 0 Rescheduling interrupts

CAL: 0 Function call interrupts

TLB: 0 TLB shootdowns

TRM: 0 Thermal event interrupts

THR: 0 Threshold APIC interrupts

MCE: 0 Machine check exceptions

MCP: 1 Machine check polls

ERR: 0

MIS: 0

[root@localhost maison]#