Forum

[romuald@localhost ~]$ su

Mot de passe :

[root@localhost romuald]# dmesg

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 3.3.8-netbook-2.mga2 (iurt@ecosse.mageia.org) (gcc version 4.6.3 (GCC) ) #1 SMP Mon Jul 30 21:50:34 UTC 2012

[ 0.000000] Command line: apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf BOOT_IMAGE=linux root=UUID=6f8b75ab-75ac-4d7e-9e11-959f89ff26d7 nokmsboot splash quiet pci=nommconf resume=UUID=b29f4179-94a8-4a3c-b558-b8a1be7ac

[ 0.000000] BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)

[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)

[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)

[ 0.000000] BIOS-e820: 0000000000100000 - 000000009ce3f000 (usable)

[ 0.000000] BIOS-e820: 000000009ce3f000 - 000000009cebf000 (reserved)

[ 0.000000] BIOS-e820: 000000009cebf000 - 000000009cfbf000 (ACPI NVS)

[ 0.000000] BIOS-e820: 000000009cfbf000 - 000000009cfff000 (ACPI data)

[ 0.000000] BIOS-e820: 000000009cfff000 - 000000009d000000 (usable)

[ 0.000000] BIOS-e820: 000000009d000000 - 000000009fa00000 (reserved)

[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)

[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)

[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)

[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)

[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)

[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)

[ 0.000000] BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)

[ 0.000000] BIOS-e820: 0000000100000000 - 000000015fe00000 (usable)

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] DMI 2.7 present.

[ 0.000000] DMI: Hewlett-Packard HP Pavilion g7 Notebook PC /1672, BIOS F.42 12/08/2011

[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)

[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)

[ 0.000000] No AGP bridge found

[ 0.000000] last_pfn = 0x15fe00 max_arch_pfn = 0x400000000

[ 0.000000] MTRR default type: uncachable

[ 0.000000] MTRR fixed ranges enabled:

[ 0.000000] 00000-9FFFF write-back

[ 0.000000] A0000-BFFFF uncachable

[ 0.000000] C0000-E7FFF write-protect

[ 0.000000] E8000-EFFFF write-combining

[ 0.000000] F0000-FFFFF write-protect

[ 0.000000] MTRR variable ranges enabled:

[ 0.000000] 0 base 000000000 mask F80000000 write-back

[ 0.000000] 1 base 080000000 mask FE0000000 write-back

[ 0.000000] 2 base 09D000000 mask FFF000000 uncachable

[ 0.000000] 3 base 09E000000 mask FFE000000 uncachable

[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect

[ 0.000000] 5 base 100000000 mask FC0000000 write-back

[ 0.000000] 6 base 140000000 mask FE0000000 write-back

[ 0.000000] 7 base 15FE00000 mask FFFE00000 uncachable

[ 0.000000] 8 disabled

[ 0.000000] 9 disabled

[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[ 0.000000] last_pfn = 0x9d000 max_arch_pfn = 0x400000000

[ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0

[ 0.000000] initial memory mapped : 0 - 20000000

[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480

[ 0.000000] init_memory_mapping: 0000000000000000-000000009d000000

[ 0.000000] 0000000000 - 009d000000 page 2M

[ 0.000000] kernel direct mapping tables up to 9d000000 @ 1fffc000-20000000

[ 0.000000] init_memory_mapping: 0000000100000000-000000015fe00000

[ 0.000000] 0100000000 - 015fe00000 page 2M

[ 0.000000] kernel direct mapping tables up to 15fe00000 @ 9ce38000-9ce3f000

[ 0.000000] RAMDISK: 37963000 - 37ff0000

[ 0.000000] No NUMA configuration found

[ 0.000000] Faking a node at 0000000000000000-000000015fe00000

[ 0.000000] Initmem setup node 0 0000000000000000-000000015fe00000

[ 0.000000] NODE_DATA [000000015fdfb000 - 000000015fdfffff]

[ 0.000000] [ffffea0000000000-ffffea00057fffff] PMD -> [ffff88015b400000-ffff88015f3fffff] on node 0

[ 0.000000] Zone PFN ranges:

[ 0.000000] DMA 0x00000010 -> 0x00001000

[ 0.000000] DMA32 0x00001000 -> 0x00100000

[ 0.000000] Normal 0x00100000 -> 0x0015fe00

[ 0.000000] Movable zone start PFN for each node

[ 0.000000] Early memory PFN ranges

[ 0.000000] 0: 0x00000010 -> 0x0000009d

[ 0.000000] 0: 0x00000100 -> 0x0009ce3f

[ 0.000000] 0: 0x0009cfff -> 0x0009d000

[ 0.000000] 0: 0x00100000 -> 0x0015fe00

[ 0.000000] On node 0 totalpages: 1035213

[ 0.000000] DMA zone: 64 pages used for memmap

[ 0.000000] DMA zone: 5 pages reserved

[ 0.000000] DMA zone: 3912 pages, LIFO batch:0

[ 0.000000] DMA32 zone: 16320 pages used for memmap

[ 0.000000] DMA32 zone: 622208 pages, LIFO batch:31

[ 0.000000] Normal zone: 6136 pages used for memmap

[ 0.000000] Normal zone: 386568 pages, LIFO batch:31

[ 0.000000] Intel MultiProcessor Specification v1.4

[ 0.000000] MPTABLE: OEM ID: Insyde

[ 0.000000] MPTABLE: Product ID: HuronRiver

[ 0.000000] MPTABLE: APIC at: 0xFEE00000

[ 0.000000] Processor #0 (Bootup-CPU)

[ 0.000000] Processor #2

[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23

[ 0.000000] Processors: 2

[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs

[ 0.000000] nr_irqs_gsi: 40

[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000

[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000

[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000

[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000

[ 0.000000] PM: Registered nosave memory: 000000009ce3f000 - 000000009cebf000

[ 0.000000] PM: Registered nosave memory: 000000009cebf000 - 000000009cfbf000

[ 0.000000] PM: Registered nosave memory: 000000009cfbf000 - 000000009cfff000

[ 0.000000] PM: Registered nosave memory: 000000009d000000 - 000000009fa00000

[ 0.000000] PM: Registered nosave memory: 000000009fa00000 - 00000000e0000000

[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000

[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000

[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000

[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000

[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000

[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000

[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000

[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000

[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000

[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000

[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000

[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffd80000

[ 0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000

[ 0.000000] Allocating PCI resources starting at 9fa00000 (gap: 9fa00000:40600000)

[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1

[ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88015fa00000 s76672 r8192 d21632 u1048576

[ 0.000000] pcpu-alloc: s76672 r8192 d21632 u1048576 alloc=1*2097152

[ 0.000000] pcpu-alloc: [0] 0 1

[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1012688

[ 0.000000] Policy zone: Normal

[ 0.000000] Kernel command line: apm=off acpi=off mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare irqpoll pci=nommconf BOOT_IMAGE=linux root=UUID=6f8b75ab-75ac-4d7e-9e11-959f89ff26d7 nokmsboot splash quiet pci=nommconf resume=UUID=b29f4179-94a8-4a3c-b558-b8a1be7ac

[ 0.000000] Misrouted IRQ fixup and polling support enabled

[ 0.000000] This may significantly impact system performance

[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340

[ 0.000000] Checking aperture...

[ 0.000000] No AGP bridge found

[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area

[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

[ 0.000000] Memory: 3991652k/5765120k available (4262k kernel code, 1624268k absent, 149200k reserved, 4543k data, 672k init)

[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1

[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] NR_IRQS:4352 nr_irqs:512 16

[ 0.000000] Console: colour VGA+ 80x25

[ 0.000000] console [tty0] enabled

[ 0.001000] Fast TSC calibration using PIT

[ 0.002000] Detected 2494.311 MHz processor.

[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.62 BogoMIPS (lpj=2494311)

[ 0.000005] pid_max: default: 32768 minimum: 301

[ 0.000021] Security Framework initialized

[ 0.000030] TOMOYO Linux initialized

[ 0.000352] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)

[ 0.001397] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)

[ 0.001830] Mount-cache hash table entries: 256

[ 0.001920] Initializing cgroup subsys cpuacct

[ 0.001922] Initializing cgroup subsys devices

[ 0.001924] Initializing cgroup subsys freezer

[ 0.001925] Initializing cgroup subsys net_cls

[ 0.001927] Initializing cgroup subsys blkio

[ 0.001951] CPU: Physical Processor ID: 0

[ 0.001952] CPU: Processor Core ID: 0

[ 0.001956] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'

[ 0.001957] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)

[ 0.001960] using mwait in idle threads.

[ 0.002050] ACPI: Checking initramfs for custom DSDT

[ 0.068068] ftrace: allocating 16518 entries in 65 pages

[ 0.077453] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1

[ 0.087443] CPU0: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz stepping 07

[ 0.290568] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.

[ 0.290573] PEBS disabled due to CPU errata.

[ 0.290575] ... version: 3

[ 0.290576] ... bit width: 48

[ 0.290577] ... generic registers: 4

[ 0.290578] ... value mask: 0000ffffffffffff

[ 0.290579] ... max period: 000000007fffffff

[ 0.290581] ... fixed-purpose events: 3

[ 0.290582] ... event mask: 000000070000000f

[ 0.290702] Booting Node 0, Processors #1 Ok.

[ 0.290704] smpboot cpu 1: start_ip = 98000

[ 0.321792] Brought up 2 CPUs

[ 0.321794] Total of 2 processors activated (9977.24 BogoMIPS).

[ 0.323134] devtmpfs: initialized

[ 0.323895] PM: Registering ACPI NVS region at 9cebf000 (1048576 bytes)

[ 0.324546] RTC time: 20:52:49, date: 10/06/12

[ 0.324574] NET: Registered protocol family 16

[ 0.324704] PCI: Using configuration type 1 for base access

[ 0.325045] bio: create slab <bio-0> at 0

[ 0.325081] ACPI: Interpreter disabled.

[ 0.325108] vgaarb: loaded

[ 0.325148] PCI: Probing PCI hardware

[ 0.325150] PCI: Probing PCI hardware (bus 00)

[ 0.325151] PCI: root bus 00: using default resources

[ 0.325169] PCI host bridge to bus 0000:00

[ 0.325171] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]

[ 0.325173] pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]

[ 0.325181] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600

[ 0.325213] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604

[ 0.325241] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold

[ 0.325259] pci 0000:00:02.0: [8086:0126] type 0 class 0x000300

[ 0.325268] pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit]

[ 0.325274] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]

[ 0.325278] pci 0000:00:02.0: reg 20: [io 0x5000-0x503f]

[ 0.325330] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780

[ 0.325353] pci 0000:00:16.0: reg 10: [mem 0xc3604000-0xc360400f 64bit]

[ 0.325428] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold

[ 0.325461] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03

[ 0.325755] pci 0000:00:1a.0: reg 10: [mem 0xc3609000-0xc36093ff]

[ 0.327418] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold

[ 0.327445] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403

[ 0.327459] pci 0000:00:1b.0: reg 10: [mem 0xc3600000-0xc3603fff 64bit]

[ 0.327528] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[ 0.327550] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604

[ 0.327626] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 0.327651] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604

[ 0.327727] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold

[ 0.327751] pci 0000:00:1c.2: [8086:1c14] type 1 class 0x000604

[ 0.327830] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold

[ 0.327863] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03

[ 0.328142] pci 0000:00:1d.0: reg 10: [mem 0xc3608000-0xc36083ff]

[ 0.329801] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

[ 0.329827] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601

[ 0.329951] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106

[ 0.329969] pci 0000:00:1f.2: reg 10: [io 0x5088-0x508f]

[ 0.329977] pci 0000:00:1f.2: reg 14: [io 0x5094-0x5097]

[ 0.329985] pci 0000:00:1f.2: reg 18: [io 0x5080-0x5087]

[ 0.329993] pci 0000:00:1f.2: reg 1c: [io 0x5090-0x5093]

[ 0.330001] pci 0000:00:1f.2: reg 20: [io 0x5060-0x507f]

[ 0.330010] pci 0000:00:1f.2: reg 24: [mem 0xc3607000-0xc36077ff]

[ 0.330053] pci 0000:00:1f.2: PME# supported from D3hot

[ 0.330072] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05

[ 0.330087] pci 0000:00:1f.3: reg 10: [mem 0xc3605000-0xc36050ff 64bit]

[ 0.330108] pci 0000:00:1f.3: reg 20: [io 0x5040-0x505f]

[ 0.330162] pci 0000:01:00.0: [1002:6760] type 0 class 0x000300

[ 0.330175] pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref]

[ 0.330187] pci 0000:01:00.0: reg 18: [mem 0xc2600000-0xc261ffff 64bit]

[ 0.330195] pci 0000:01:00.0: reg 20: [io 0x4000-0x40ff]

[ 0.330208] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref]

[ 0.330242] pci 0000:01:00.0: supports D1 D2

[ 0.331527] pci 0000:00:01.0: PCI bridge to [bus 01-01]

[ 0.331534] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]

[ 0.331541] pci 0000:00:01.0: bridge window [mem 0xc2600000-0xc35fffff]

[ 0.331551] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]

[ 0.331692] pci 0000:02:00.0: [1814:5390] type 0 class 0x000280

[ 0.331717] pci 0000:02:00.0: reg 10: [mem 0xc2500000-0xc250ffff]

[ 0.333547] pci 0000:00:1c.0: PCI bridge to [bus 02-02]

[ 0.333562] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff]

[ 0.333676] pci 0000:03:00.0: [10ec:8136] type 0 class 0x000200

[ 0.333694] pci 0000:03:00.0: reg 10: [io 0x3000-0x30ff]

[ 0.333729] pci 0000:03:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref]

[ 0.333750] pci 0000:03:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref]

[ 0.333842] pci 0000:03:00.0: supports D1 D2

[ 0.333843] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.335526] pci 0000:00:1c.1: PCI bridge to [bus 03-03]

[ 0.335535] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]

[ 0.335555] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]

[ 0.335669] pci 0000:04:00.0: [10ec:5209] type 0 class 0x00ff00

[ 0.335687] pci 0000:04:00.0: reg 10: [mem 0xc1500000-0xc1500fff]

[ 0.335834] pci 0000:04:00.0: supports D1 D2

[ 0.335836] pci 0000:04:00.0: PME# supported from D1 D2 D3hot

[ 0.337523] pci 0000:00:1c.2: PCI bridge to [bus 04-04]

[ 0.337533] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]

[ 0.337542] pci 0000:00:1c.2: bridge window [mem 0xc1500000-0xc24fffff]

[ 0.337557] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc14fffff 64bit pref]

[ 0.337666] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none

[ 0.337836] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none

[ 0.337936] pci 0000:00:1f.0: PIIX/ICH IRQ router [8086:1c49]

[ 0.337942] PCI: pci_cache_line_size set to 64 bytes

[ 0.338044] reserve RAM buffer: 000000000009d800 - 000000000009ffff

[ 0.338046] reserve RAM buffer: 000000009ce3f000 - 000000009fffffff

[ 0.338048] reserve RAM buffer: 000000009d000000 - 000000009fffffff

[ 0.338050] reserve RAM buffer: 000000015fe00000 - 000000015fffffff

[ 0.338120] NetLabel: Initializing

[ 0.338121] NetLabel: domain hash size = 128

[ 0.338122] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.338131] NetLabel: unlabeled traffic allowed by default

[ 0.341989] pnp: PnP ACPI: disabled

[ 0.342996] pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref]

[ 0.343001] PCI: max bus depth: 1 pci_try_num: 2

[ 0.343036] pci 0000:01:00.0: BAR 6: assigned [mem 0xc2620000-0xc263ffff pref]

[ 0.343039] pci 0000:00:01.0: PCI bridge to [bus 01-01]

[ 0.343041] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]

[ 0.343044] pci 0000:00:01.0: bridge window [mem 0xc2600000-0xc35fffff]

[ 0.343046] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref]

[ 0.343050] pci 0000:00:1c.0: PCI bridge to [bus 02-02]

[ 0.343055] pci 0000:00:1c.0: bridge window [mem 0xc2500000-0xc25fffff]

[ 0.343063] pci 0000:00:1c.1: PCI bridge to [bus 03-03]

[ 0.343066] pci 0000:00:1c.1: bridge window [io 0x3000-0x3fff]

[ 0.343073] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc04fffff 64bit pref]

[ 0.343080] pci 0000:00:1c.2: PCI bridge to [bus 04-04]

[ 0.343083] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]

[ 0.343088] pci 0000:00:1c.2: bridge window [mem 0xc1500000-0xc24fffff]

[ 0.343092] pci 0000:00:1c.2: bridge window [mem 0xc0500000-0xc14fffff 64bit pref]

[ 0.343108] pci 0000:00:01.0: PCI->APIC IRQ transform: INT A -> IRQ 16

[ 0.343117] pci 0000:00:1c.0: PCI->APIC IRQ transform: INT A -> IRQ 17

[ 0.343124] pci 0000:00:1c.1: PCI->APIC IRQ transform: INT B -> IRQ 16

[ 0.343133] pci 0000:00:1c.2: PCI->APIC IRQ transform: INT C -> IRQ 18

[ 0.343137] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]

[ 0.343139] pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]

[ 0.343141] pci_bus 0000:01: resource 0 [io 0x4000-0x4fff]

[ 0.343142] pci_bus 0000:01: resource 1 [mem 0xc2600000-0xc35fffff]

[ 0.343144] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]

[ 0.343146] pci_bus 0000:02: resource 1 [mem 0xc2500000-0xc25fffff]

[ 0.343148] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff]

[ 0.343150] pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc04fffff 64bit pref]

[ 0.343152] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]

[ 0.343153] pci_bus 0000:04: resource 1 [mem 0xc1500000-0xc24fffff]

[ 0.343155] pci_bus 0000:04: resource 2 [mem 0xc0500000-0xc14fffff 64bit pref]

[ 0.343175] NET: Registered protocol family 2

[ 0.343288] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)

[ 0.344082] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)

[ 0.345859] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[ 0.346075] TCP: Hash tables configured (established 524288 bind 65536)

[ 0.346077] TCP reno registered

[ 0.346084] UDP hash table entries: 2048 (order: 4, 65536 bytes)

[ 0.346105] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)

[ 0.346171] NET: Registered protocol family 1

[ 0.346184] pci 0000:00:02.0: Boot video device

[ 0.346199] pci 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16

[ 0.356532] pci 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23

[ 0.367518] PCI: CLS 64 bytes, default 64

[ 0.367594] Trying to unpack rootfs image as initramfs...

[ 0.439896] Freeing initrd memory: 6708k freed

[ 0.440748] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[ 0.440752] Placing 64MB software IO TLB between ffff880098e38000 - ffff88009ce38000

[ 0.440754] software IO TLB at phys 0x98e38000 - 0x9ce38000

[ 0.440797] platform rtc_cmos: registered platform RTC device (no PNP device found)

[ 0.440966] audit: initializing netlink socket (disabled)

[ 0.440975] type=2000 audit(1349556769.315:1): initialized

[ 0.455674] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[ 0.457002] VFS: Disk quotas dquot_6.5.2

[ 0.457037] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 0.457144] msgmni has been set to 7809

[ 0.457263] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)

[ 0.457278] io scheduler noop registered

[ 0.457279] io scheduler deadline registered

[ 0.457324] io scheduler cfq registered (default)

[ 0.457524] pcieport 0000:00:1c.2: irq 40 for MSI/MSI-X

[ 0.457634] intel_idle: MWAIT substates: 0x21120

[ 0.457636] intel_idle: v0.4 model 0x2A

[ 0.457637] intel_idle: lapic_timer_reliable_states 0xffffffff

[ 0.457674] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 0.457855] Linux agpgart interface v0.103

[ 0.457908] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset

[ 0.457998] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable

[ 0.458753] agpgart-intel 0000:00:00.0: detected 32768K stolen memory

[ 0.458818] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000

[ 0.459630] brd: module loaded

[ 0.459691] i8042: PNP: No PS/2 controller found. Probing ports directly.

[ 0.468901] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 0.468905] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 0.468965] mousedev: PS/2 mouse device common for all mice

[ 0.469477] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0

[ 0.469502] rtc0: alarms up to one day, 114 bytes nvram

[ 0.469534] cpuidle: using governor ladder

[ 0.469575] cpuidle: using governor menu

[ 0.469701] TCP cubic registered

[ 0.469703] Registering the dns_resolver key type

[ 0.469767] PM: Checking hibernation image partition UUID=b29f4179-94a8-4a3c-b558-b8a1be7ac

[ 0.481286] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[ 0.489249] PM: Hibernation image not present or could not be loaded.

[ 0.489259] registered taskstats version 1

[ 0.489646] Magic number: 0:935:901

[ 0.489651] clocksource clocksource0: hash matches

[ 0.489996] rtc_cmos rtc_cmos: setting system clock to 2012-10-06 20:52:49 UTC (1349556769)

[ 0.489998] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found

[ 0.490990] Freeing unused kernel memory: 672k freed

[ 0.491069] Write protecting the kernel read-only data: 8192k

[ 0.495695] Freeing unused kernel memory: 1864k freed

[ 0.496082] Freeing unused kernel memory: 32k freed

[ 0.520811] SCSI subsystem initialized

[ 0.532024] mpt2sas version 12.100.00.00 loaded

[ 0.543963] libata version 3.00 loaded.

[ 0.546740] ahci 0000:00:1f.2: version 3.0

[ 0.546756] ahci 0000:00:1f.2: PCI->APIC IRQ transform: INT B -> IRQ 19

[ 0.546794] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X

[ 0.557161] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x11 impl SATA mode

[ 0.557164] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst

[ 0.557168] ahci 0000:00:1f.2: setting latency timer to 64

[ 0.559406] scsi0 : ahci

[ 0.559465] scsi1 : ahci

[ 0.559506] scsi2 : ahci

[ 0.559542] scsi3 : ahci

[ 0.559577] scsi4 : ahci

[ 0.559612] scsi5 : ahci

[ 0.559641] ata1: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607100 irq 41

[ 0.559643] ata2: DUMMY

[ 0.559644] ata3: DUMMY

[ 0.559645] ata4: DUMMY

[ 0.559647] ata5: SATA max UDMA/133 abar m2048@0xc3607000 port 0xc3607300 irq 41

[ 0.559649] ata6: DUMMY

[ 0.853928] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input1

[ 0.863940] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 0.865665] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 0.871628] ata1.00: ATA-9: ST500LM012 HN-M500MBB, 2AR10002, max UDMA/133

[ 0.871630] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA

[ 0.877605] ata1.00: configured for UDMA/133

[ 0.877687] scsi 0:0:0:0: Direct-Access ATA ST500LM012 HN-M5 2AR1 PQ: 0 ANSI: 5

[ 0.878623] ata5.00: ATAPI: hp DVD-RAM UJ8B1, H.03, max UDMA/100

[ 0.891250] ata5.00: configured for UDMA/100

[ 0.892649] scsi 4:0:0:0: CD-ROM hp DVD-RAM UJ8B1 H.03 PQ: 0 ANSI: 5

[ 0.897999] dracut: dracut-017-16.mga2

[ 0.910276] udevd[106]: starting version 181

[ 0.953087] dracut: Starting plymouth daemon

[ 1.010260] usbcore: registered new interface driver usbfs

[ 1.010279] usbcore: registered new interface driver hub

[ 1.012739] usbcore: registered new device driver usb

[ 1.021966] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)

[ 1.021969] sd 0:0:0:0: [sda] 4096-byte physical blocks

[ 1.021999] sd 0:0:0:0: [sda] Write Protect is off

[ 1.022002] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 1.022015] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.023406] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray

[ 1.023409] cdrom: Uniform CD-ROM driver Revision: 3.20

[ 1.023482] sr 4:0:0:0: Attached scsi CD-ROM sr0

[ 1.029120] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 1.029152] ehci_hcd 0000:00:1a.0: PCI->APIC IRQ transform: INT A -> IRQ 16

[ 1.029169] ehci_hcd 0000:00:1a.0: setting latency timer to 64

[ 1.029173] ehci_hcd 0000:00:1a.0: EHCI Host Controller

[ 1.029191] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1

[ 1.029217] ehci_hcd 0000:00:1a.0: debug port 2

[ 1.033096] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported

[ 1.036002] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc3609000

[ 1.039360] rts_pstor: module is from the staging directory, the quality is unknown, you have been warned.

[ 1.039892] Initializing Realtek PCIE storage driver...

[ 1.039919] rts_pstor 0000:04:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18

[ 1.039953] Resource length: 0x1000

[ 1.039965] Original address: 0xc1500000, remapped address: 0xffffc90001044000

[ 1.039968] pci->irq = 18

[ 1.039969] rtsx_acquire_irq: chip->msi_en = 0, pci->irq = 18

[ 1.041384] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00

[ 1.041412] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[ 1.041414] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.041416] usb usb1: Product: EHCI Host Controller

[ 1.041417] usb usb1: Manufacturer: Linux 3.3.8-netbook-2.mga2 ehci_hcd

[ 1.041419] usb usb1: SerialNumber: 0000:00:1a.0

[ 1.041498] hub 1-0:1.0: USB hub found

[ 1.041501] hub 1-0:1.0: 2 ports detected

[ 1.041552] ehci_hcd 0000:00:1d.0: PCI->APIC IRQ transform: INT A -> IRQ 23

[ 1.041565] ehci_hcd 0000:00:1d.0: setting latency timer to 64

[ 1.041569] ehci_hcd 0000:00:1d.0: EHCI Host Controller

[ 1.041575] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2

[ 1.041600] ehci_hcd 0000:00:1d.0: debug port 2

[ 1.045467] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported

[ 1.045478] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xc3608000

[ 1.051364] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00

[ 1.051377] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

[ 1.051379] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 1.051381] usb usb2: Product: EHCI Host Controller

[ 1.051382] usb usb2: Manufacturer: Linux 3.3.8-netbook-2.mga2 ehci_hcd

[ 1.051383] usb usb2: SerialNumber: 0000:00:1d.0

[ 1.051448] hub 2-0:1.0: USB hub found

[ 1.051450] hub 2-0:1.0: 2 ports detected

[ 1.134799] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 > sda4

[ 1.135149] sd 0:0:0:0: [sda] Attached SCSI disk

[ 1.240511] scsi6 : SCSI emulation for PCI-Express Mass Storage devices

[ 1.240574] rts_pstor: waiting for device to settle before scanning

[ 1.343173] usb 1-1: new high-speed USB device number 2 using ehci_hcd

[ 1.442741] Switching to clocksource tsc

[ 1.457118] usb 1-1: New USB device found, idVendor=8087, idProduct=0024

[ 1.457120] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 1.457274] hub 1-1:1.0: USB hub found

[ 1.457368] hub 1-1:1.0: 6 ports detected

[ 1.559559] usb 2-1: new high-speed USB device number 2 using ehci_hcd

[ 2.238803] scsi 6:0:0:0: Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS

[ 2.239013] Bad LUN (0:1)

[ 2.239019] sd 6:0:0:0: [sdb] Attached SCSI removable disk

[ 2.239056] Bad target number (1:0)

[ 2.239175] Bad target number (2:0)

[ 2.239210] Bad target number (3:0)

[ 2.239245] Bad target number (4:0)

[ 2.239569] Bad target number (5:0)

[ 2.239671] Bad target number (6:0)

[ 2.239709] Bad target number (7:0)

[ 2.239721] rts_pstor: device scan complete

[ 13.976940] dracut Warning: Cancelling resume operation. Device not found.

[ 14.403708] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)

[ 14.472106] dracut: Checking ext4: /dev/disk/by-uuid/6f8b75ab-75ac-4d7e-9e11-959f89ff26d7

[ 14.472145] dracut: issuing e2fsck -a /dev/disk/by-uuid/6f8b75ab-75ac-4d7e-9e11-959f89ff26d7

[ 14.550882] dracut: /dev/disk/by-uuid/6f8b75ab-75ac-4d7e-9e11-959f89ff26d7: clean, 81274/1962240 files, 900385/7846917 blocks

[ 14.551004] dracut: Remounting /dev/disk/by-uuid/6f8b75ab-75ac-4d7e-9e11-959f89ff26d7 with -o acl,noatime,ro

[ 14.603074] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl

[ 14.695512] dracut: Mounted root filesystem /dev/sda6

[ 14.941896] dracut: Switching root

[ 14.942695] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.

[ 15.619796] NET: Registered protocol family 10

[ 17.068921] usb 2-1: device not accepting address 2, error -110

[ 17.170763] usb 2-1: new high-speed USB device number 3 using ehci_hcd

[ 17.402516] udevd[571]: starting version 181

[ 18.263795] EXT4-fs (sda6): re-mounted. Opts: acl

[ 20.028374] Non-volatile memory driver v1.3

[ 22.531396] snd_hda_intel 0000:00:1b.0: PCI->APIC IRQ transform: INT A -> IRQ 22

[ 22.531443] snd_hda_intel 0000:00:1b.0: irq 42 for MSI/MSI-X

[ 22.590278] iTCO_vendor_support: vendor-support=0

[ 22.602051] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07

[ 22.602122] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)

[ 22.602176] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)

[ 22.614250] mei: module is from the staging directory, the quality is unknown, you have been warned.

[ 22.775015] cfg80211: Calling CRDA to update world regulatory domain

[ 23.051628] mute LED gpio 1 polarity 0

[ 23.051633] autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker

[ 23.051635] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[ 23.051636] hp_outs=1 (0xb/0x0/0x0/0x0/0x0)

[ 23.051637] mono: mono_out=0x0

[ 23.051638] inputs: Mic=0xc

[ 23.051835] stac92xx: dac_nids=1 (0x13/0x0/0x0/0x0/0x0)

[ 23.062980] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0

[ 23.063039] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2

[ 23.063103] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3

[ 23.063144] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4

[ 23.063504] mei 0000:00:16.0: PCI->APIC IRQ transform: INT A -> IRQ 16

[ 23.063510] mei 0000:00:16.0: setting latency timer to 64

[ 23.063572] mei 0000:00:16.0: irq 43 for MSI/MSI-X

[ 23.089459] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[ 23.089492] r8169 0000:03:00.0: PCI->APIC IRQ transform: INT A -> IRQ 17

[ 23.089580] r8169 0000:03:00.0: irq 44 for MSI/MSI-X

[ 23.089853] r8169 0000:03:00.0: eth0: RTL8105e at 0xffffc90001052000, 80:c1:6e:48:d2:36, XID 00a00000 IRQ 44

[ 23.149747] i801_smbus 0000:00:1f.3: PCI->APIC IRQ transform: INT B -> IRQ 19

[ 23.149751] ACPI Exception: AE_BAD_PARAMETER, Thread 1484560016 could not acquire Mutex [0x1] (20120111/utmutex-276)

[ 23.388845] rt2800pci 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 16

[ 23.675212] cfg80211: World regulatory domain updated:

[ 23.675214] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 23.675216] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 23.675219] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 23.675220] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)

[ 23.675222] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 23.675224] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)

[ 23.850909] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'

[ 23.851232] Registered led device: rt2800pci-phy0::radio

[ 23.851244] Registered led device: rt2800pci-phy0::assoc

[ 23.851255] Registered led device: rt2800pci-phy0::quality

[ 23.856445] cfg80211: Calling CRDA for country: FR

[ 23.858519] cfg80211: Regulatory domain changed to country: FR

[ 23.858522] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 23.858524] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[ 23.858526] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[ 23.858527] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[ 23.858529] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)

[ 25.620232] device-mapper: uevent: version 1.0.3

[ 25.620296] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com

[ 32.309013] Adding 4929924k swap on /dev/sda7. Priority:0 extents:1 across:4929924k

[ 32.680123] usb 2-1: device not accepting address 3, error -110

[ 32.781964] usb 2-1: new high-speed USB device number 4 using ehci_hcd

[ 34.813493] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl

[ 43.187432] usb 2-1: device not accepting address 4, error -110

[ 43.289271] usb 2-1: new high-speed USB device number 5 using ehci_hcd

[ 53.694740] usb 2-1: device not accepting address 5, error -110

[ 53.694752] hub 2-0:1.0: unable to enumerate USB device on port 1

[ 53.768700] usb 1-1.1: new low-speed USB device number 3 using ehci_hcd

[ 53.846844] usb 1-1.1: New USB device found, idVendor=04f3, idProduct=0234

[ 53.846846] usb 1-1.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0

[ 53.846848] usb 1-1.1: Product: OM

[ 53.878283] input: OM as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input5

[ 53.878355] generic-usb 0003:04F3:0234.0001: input,hidraw0: USB HID v1.11 Mouse [OM] on usb-0000:00:1a.0-1.1/input0

[ 53.878368] usbcore: registered new interface driver usbhid

[ 53.878369] usbhid: USB HID core driver

[ 56.042334] microcode: CPU0 sig=0x206a7, pf=0x10, revision=0x1b

[ 56.042910] microcode: CPU1 sig=0x206a7, pf=0x10, revision=0x1b

[ 56.043548] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

[ 56.067236] microcode: CPU0 updated to revision 0x25, date = 2011-10-11

[ 56.067687] microcode: CPU1 updated to revision 0x25, date = 2011-10-11

[ 56.068923] microcode: Microcode Update Driver: v2.00 removed.

[ 56.546283] [drm] Initialized drm 1.1.0 20060810

[ 56.596329] r8169 0000:03:00.0: eth0: link down

[ 56.596335] r8169 0000:03:00.0: eth0: link down

[ 56.596634] ADDRCONF(NETDEV_UP): eth0: link is not ready

[ 56.618688] ADDRCONF(NETDEV_UP): wlan0: link is not ready

[ 57.950604] EXT4-fs (sda6): re-mounted. Opts: acl,commit=0

[ 58.035624] EXT4-fs (sda8): re-mounted. Opts: acl,commit=0

[ 58.162669] fuse init (API version 7.18)

[ 58.247167] r8169 0000:03:00.0: eth0: link up

[ 58.247419] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

[ 60.684456] NET: Registered protocol family 17

[ 69.219079] eth0: no IPv6 routers present

[ 80.133562] ip_tables: (C) 2000-2006 Netfilter Core Team

[ 80.306404] Netfilter messages via NETLINK v0.30.

[ 80.315012] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)

[ 80.374074] ip6_tables: (C) 2000-2006 Netfilter Core Team

[ 80.374375] NF_TPROXY: Transparent proxy support initialized, version 4.1.0

[ 80.374377] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.

[ 80.392193] ctnetlink v0.93: registering with nfnetlink.

[ 80.436198] ip_set: protocol 6

[ 80.449084] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully

[ 80.626581] xt_time: kernel timezone is +0200

[ 80.696089] Bridge firewalling registered

[ 81.255100] u32 classifier

[ 81.255103] Actions configured

[ 81.708530] netfilter PSD loaded - (c) astaro AG

[ 81.964208] IFWLOG: register target

[root@localhost romuald]#

[romuald@localhost ~]$ su

Mot de passe :

[root@localhost romuald]# cpufreq-info

cpufrequtils 008: cpufreq-info (C) Dominik Brodowski 2004-2009

Veuillez rapportez les erreurs et les bogues à cpufreq@vger.kernel.org, s'il vous plait.

analyse du CPU 0 :

pilote : acpi-cpufreq

CPUs which run at the same hardware frequency: 0 1 2 3

CPUs which need to have their frequency coordinated by software: 0

maximum transition latency: 10.0 us.

limitation matérielle : 800 MHz - 2.50 GHz

plage de fréquence : 2.50 GHz, 2.50 GHz, 2.20 GHz, 2.00 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 1000 MHz, 800 MHz

régulateurs disponibles : ondemand, conservative, powersave, userspace, performance

tactique actuelle : la fréquence doit être comprise entre 800 MHz et 2.50 GHz.

Le régulateur "performance" est libre de choisir la vitesse

dans cette plage de fréquences.

la fréquence actuelle de ce CPU est 2.50 GHz (vérifié par un appel direct du matériel).

analyse du CPU 1 :

pilote : acpi-cpufreq

CPUs which run at the same hardware frequency: 0 1 2 3

CPUs which need to have their frequency coordinated by software: 1

maximum transition latency: 10.0 us.

limitation matérielle : 800 MHz - 2.50 GHz

plage de fréquence : 2.50 GHz, 2.50 GHz, 2.20 GHz, 2.00 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 1000 MHz, 800 MHz

régulateurs disponibles : ondemand, conservative, powersave, userspace, performance

tactique actuelle : la fréquence doit être comprise entre 800 MHz et 2.50 GHz.

Le régulateur "performance" est libre de choisir la vitesse

dans cette plage de fréquences.

la fréquence actuelle de ce CPU est 2.50 GHz (vérifié par un appel direct du matériel).

analyse du CPU 2 :

pilote : acpi-cpufreq

CPUs which run at the same hardware frequency: 0 1 2 3

CPUs which need to have their frequency coordinated by software: 2

maximum transition latency: 10.0 us.

limitation matérielle : 800 MHz - 2.50 GHz

plage de fréquence : 2.50 GHz, 2.50 GHz, 2.20 GHz, 2.00 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 1000 MHz, 800 MHz

régulateurs disponibles : ondemand, conservative, powersave, userspace, performance

tactique actuelle : la fréquence doit être comprise entre 800 MHz et 2.50 GHz.

Le régulateur "performance" est libre de choisir la vitesse

dans cette plage de fréquences.

la fréquence actuelle de ce CPU est 2.50 GHz (vérifié par un appel direct du matériel).

analyse du CPU 3 :

pilote : acpi-cpufreq

CPUs which run at the same hardware frequency: 0 1 2 3

CPUs which need to have their frequency coordinated by software: 3

maximum transition latency: 10.0 us.

limitation matérielle : 800 MHz - 2.50 GHz

plage de fréquence : 2.50 GHz, 2.50 GHz, 2.20 GHz, 2.00 GHz, 1.80 GHz, 1.60 GHz, 1.40 GHz, 1.20 GHz, 1000 MHz, 800 MHz

régulateurs disponibles : ondemand, conservative, powersave, userspace, performance

tactique actuelle : la fréquence doit être comprise entre 800 MHz et 2.50 GHz.

Le régulateur "performance" est libre de choisir la vitesse

dans cette plage de fréquences.

la fréquence actuelle de ce CPU est 2.50 GHz (vérifié par un appel direct du matériel).

[root@localhost romuald]#