Samsung ML-1210, test bon, autres impressions bordéliques

Samsung ML-1210, test bon, autres impressions bordéliques [Réglé]

Système et matériels / Imprimantes scanners et Appareils Photo

maumau Membre non connecté

Le 11/01/2012 à 09h08

salut,

je ne vois pas ces logs dans /etc, je joins donc ceux du : 631.

je voulais joindre 2 fichiers mais je tombe sur "Format du fichier invalide" sans explication dans l'aide...je les copie donc ci-après:

error_log

--------------

Caché :

[global]

E [10/Jan/2012:07:58:56 +0100] Returning HTTP Interdit for CUPS-Delete-Printer (ipp://localhost/printers/Samsung-ML-1210) from localhost

E [10/Jan/2012:08:03:29 +0100] cupsdAuthorize: Empty Basic password!

E [10/Jan/2012:08:03:44 +0100] Bad request line "" from localhost!

E [10/Jan/2012:08:06:24 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!

E [10/Jan/2012:08:06:24 +0100] [cups-driverd] Skipping "/usr/local/share/ppd": loop detected!

E [10/Jan/2012:08:06:24 +0100] [cups-driverd] Skipping "/usr/share/ppd": loop detected!

E [10/Jan/2012:08:06:24 +0100] [cups-driverd] Skipping "/opt/share/ppd": loop detected!

E [10/Jan/2012:08:06:43 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!

E [10/Jan/2012:08:06:43 +0100] [cups-driverd] Skipping "/usr/local/share/ppd": loop detected!

E [10/Jan/2012:08:06:43 +0100] [cups-driverd] Skipping "/usr/share/ppd": loop detected!

E [10/Jan/2012:08:06:43 +0100] [cups-driverd] Skipping "/opt/share/ppd": loop detected!

E [10/Jan/2012:08:08:59 +0100] [Job 15] impossible de localiser l’imprimante « furstoss ».

D [10/Jan/2012:08:08:59 +0100] [Job 15] The following messages were recorded from 08:08:58 to 08:08:59

D [10/Jan/2012:08:08:59 +0100] [Job 15] Looking up "furstoss"...

D [10/Jan/2012:08:08:59 +0100] [Job 15] Added option PageSize

D [10/Jan/2012:08:08:59 +0100] [Job 15] Added option ImageableArea

D [10/Jan/2012:08:08:59 +0100] [Job 15] Added option PaperDimension

D [10/Jan/2012:08:08:59 +0100] [Job 15] Added option HalftoningAlgorithm

D [10/Jan/2012:08:08:59 +0100] [Job 15] Added option Density

D [10/Jan/2012:08:08:59 +0100] [Job 15] Added option JamRecovery

D [10/Jan/2012:08:08:59 +0100] [Job 15] Started filter pdftops (PID 10103)

D [10/Jan/2012:08:08:59 +0100] [Job 15] Added option AllowReprint

D [10/Jan/2012:08:08:59 +0100] [Job 15] Started filter pstops (PID 10104)

D [10/Jan/2012:08:08:59 +0100] [Job 15] Added option Altitude

D [10/Jan/2012:08:08:59 +0100] [Job 15] Added option PageTimeout

D [10/Jan/2012:08:08:59 +0100] [Job 15] Added option PowerSaving

D [10/Jan/2012:08:08:59 +0100] [Job 15] Added option PowerSaveTime

D [10/Jan/2012:08:08:59 +0100] [Job 15] Added option PageSizeJCL

D [10/Jan/2012:08:08:59 +0100] [Job 15] Added option PageSizePS

D [10/Jan/2012:08:08:59 +0100] [Job 15] Added option Font

D [10/Jan/2012:08:08:59 +0100] [Job 15]

D [10/Jan/2012:08:08:59 +0100] [Job 15] Parameter Summary

D [10/Jan/2012:08:08:59 +0100] [Job 15] -----------------

D [10/Jan/2012:08:08:59 +0100] [Job 15]

D [10/Jan/2012:08:08:59 +0100] [Job 15] Spooler: cups

D [10/Jan/2012:08:08:59 +0100] [Job 15] Printer: ML12010

D [10/Jan/2012:08:08:59 +0100] [Job 15] Shell: /bin/bash

D [10/Jan/2012:08:08:59 +0100] [Job 15] PPD file: /etc/cups/ppd/ML12010.ppd

D [10/Jan/2012:08:08:59 +0100] [Job 15] ATTR file:

D [10/Jan/2012:08:08:59 +0100] [Job 15] Printer model: Samsung ML-1210 Foomatic/gdi

D [10/Jan/2012:08:08:59 +0100] [Job 15] Job title: plantage

D [10/Jan/2012:08:08:59 +0100] [Job 15] File(s) to be printed:

D [10/Jan/2012:08:08:59 +0100] [Job 15] <STDIN>

D [10/Jan/2012:08:08:59 +0100] [Job 15]

D [10/Jan/2012:08:08:59 +0100] [Job 15] Ghostscript extra search path ('GS_LIB'): /usr/share/cups/fonts

D [10/Jan/2012:08:08:59 +0100] [Job 15] Printing system options:

D [10/Jan/2012:08:08:59 +0100] [Job 15] Pondering option 'media=A4'

D [10/Jan/2012:08:08:59 +0100] [Job 15] Pondering option 'job-uuid=urn:uuid:570f35bf-6dbf-3ca7-523d-883576377647'

D [10/Jan/2012:08:08:59 +0100] [Job 15] Unknown option job-uuid=urn:uuid:570f35bf-6dbf-3ca7-523d-883576377647.

D [10/Jan/2012:08:08:59 +0100] [Job 15] Pondering option 'job-originating-host-name=localhost'

D [10/Jan/2012:08:08:59 +0100] [Job 15] Unknown option job-originating-host-name=localhost.

D [10/Jan/2012:08:08:59 +0100] [Job 15] Pondering option 'time-at-creation=1326179338'

D [10/Jan/2012:08:08:59 +0100] [Job 15] Unknown option time-at-creation=1326179338.

D [10/Jan/2012:08:08:59 +0100] [Job 15] Pondering option 'time-at-processing=1326179338'

D [10/Jan/2012:08:08:59 +0100] [Job 15] Unknown option time-at-processing=1326179338.

D [10/Jan/2012:08:08:59 +0100] [Job 15] Pondering option 'AP_D_InputSlot='

D [10/Jan/2012:08:08:59 +0100] [Job 15] Unknown option AP_D_InputSlot=.

D [10/Jan/2012:08:08:59 +0100] [Job 15] Options from the PPD file:

D [10/Jan/2012:08:08:59 +0100] [Job 15] Pondering option 'PageSize=A4'

D [10/Jan/2012:08:08:59 +0100] [Job 15]

D [10/Jan/2012:08:08:59 +0100] [Job 15] ================================================

D [10/Jan/2012:08:08:59 +0100] [Job 15]

D [10/Jan/2012:08:08:59 +0100] [Job 15] File: <STDIN>

D [10/Jan/2012:08:08:59 +0100] [Job 15]

D [10/Jan/2012:08:08:59 +0100] [Job 15] ================================================

D [10/Jan/2012:08:08:59 +0100] [Job 15]

D [10/Jan/2012:08:08:59 +0100] [Job 15] Page = 595x842; 18,36 to 577,806

D [10/Jan/2012:08:08:59 +0100] [Job 15] slow_collate=0, slow_duplex=0, slow_order=0

D [10/Jan/2012:08:08:59 +0100] [Job 15] Before copy_comments - %!PS-Adobe-3.0

D [10/Jan/2012:08:08:59 +0100] [Job 15] %!PS-Adobe-3.0

D [10/Jan/2012:08:08:59 +0100] [Job 15] %%Creator:

D [10/Jan/2012:08:08:59 +0100] [Job 15] %%LanguageLevel: 3

D [10/Jan/2012:08:08:59 +0100] [Job 15] %%DocumentSuppliedResources: (atend)

D [10/Jan/2012:08:08:59 +0100] [Job 15] %%DocumentMedia: plain 595 842 0 () ()

D [10/Jan/2012:08:08:59 +0100] [Job 15] %%BoundingBox: 0 0 595 842

D [10/Jan/2012:08:08:59 +0100] [Job 15] %%Pages: 1

D [10/Jan/2012:08:08:59 +0100] [Job 15] %%EndComments

D [10/Jan/2012:08:08:59 +0100] [Job 15] Before copy_prolog - %%BeginDefaults

D [10/Jan/2012:08:08:59 +0100] [Job 15] Filetype: PostScript

D [10/Jan/2012:08:08:59 +0100] [Job 15] Before copy_setup - %%BeginSetup

D [10/Jan/2012:08:08:59 +0100] [Job 15] Reading PostScript input ...

D [10/Jan/2012:08:08:59 +0100] [Job 15] --> This document is DSC-conforming!

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found %RBINumCopies: 1

D [10/Jan/2012:08:08:59 +0100] [Job 15] Job claims to be DSC-conforming, but "%%BeginProlog" was missing before first line with another"%%BeginProlog" comment (is this a TeX/LaTeX/dvips-generated PostScript file?). Assuming start of "Prolog" here.

D [10/Jan/2012:08:08:59 +0100] [Job 15]

D [10/Jan/2012:08:08:59 +0100] [Job 15] -----------

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginProlog

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%EndProlog

D [10/Jan/2012:08:08:59 +0100] [Job 15]

D [10/Jan/2012:08:08:59 +0100] [Job 15] -----------

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginSetup

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginFeature: *PageSize A4

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: PageSize=A4

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %% FoomaticRIPOptionSetting: PageSize=A4

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: PageSize=A4

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginFeature: *Manualfeed Off

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: Manualfeed=Off

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %% FoomaticRIPOptionSetting: Manualfeed=Off

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: Manualfeed=Off

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginFeature: *Economode Off

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: Economode=Off

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %% FoomaticRIPOptionSetting: Economode=Off

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: Economode=Off

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginFeature: *Resolution 600x600dpi

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: Resolution=600x600dpi

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %% FoomaticRIPOptionSetting: Resolution=600x600dpi

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: Resolution=600x600dpi

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginFeature: *MediaType Normal

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: MediaType=Normal

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %% FoomaticRIPOptionSetting: MediaType=Normal

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: MediaType=Normal

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginFeature: *Density 3

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: Density=3

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %% FoomaticRIPOptionSetting: Density=3

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: Density=3

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginFeature: *JamRecovery Yes

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: JamRecovery=Yes

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %% FoomaticRIPOptionSetting: JamRecovery=Yes

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: JamRecovery=Yes

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginFeature: *AllowReprint Yes

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: AllowReprint=Yes

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %% FoomaticRIPOptionSetting: AllowReprint=Yes

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: AllowReprint=Yes

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginFeature: *Altitude Low

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: Altitude=Low

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %% FoomaticRIPOptionSetting: Altitude=Low

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: Altitude=Low

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginFeature: *Copies 1

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: Copies=1

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %% FoomaticRIPOptionSetting: Copies=1

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: Copies=1

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginFeature: *PageTimeout 15

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: PageTimeout=15

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %% FoomaticRIPOptionSetting: PageTimeout=15

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: PageTimeout=15

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginFeature: *PowerSaving On

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: PowerSaving=On

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %% FoomaticRIPOptionSetting: PowerSaving=On

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: PowerSaving=On

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginFeature: *PowerSaveTime 5

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: PowerSaveTime=5

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %% FoomaticRIPOptionSetting: PowerSaveTime=5

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: PowerSaveTime=5

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Before page loop - %%Page: 1 1

D [10/Jan/2012:08:08:59 +0100] [Job 15] Copying page 1...

D [10/Jan/2012:08:08:59 +0100] [Job 15] pagew = 559.0, pagel = 770.0

D [10/Jan/2012:08:08:59 +0100] [Job 15] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842

D [10/Jan/2012:08:08:59 +0100] [Job 15] PageLeft = 18.0, PageRight = 577.0

D [10/Jan/2012:08:08:59 +0100] [Job 15] PageTop = 806.0, PageBottom = 36.0

D [10/Jan/2012:08:08:59 +0100] [Job 15] PageWidth = 595.0, PageLength = 842.0

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%EndSetup

D [10/Jan/2012:08:08:59 +0100] [Job 15] Inserting PostScript code for CUPS' page accounting

D [10/Jan/2012:08:08:59 +0100] [Job 15]

D [10/Jan/2012:08:08:59 +0100] [Job 15] -----------

D [10/Jan/2012:08:08:59 +0100] [Job 15] New page: %%Page: 1 1

D [10/Jan/2012:08:08:59 +0100] [Job 15]

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginPageSetup

D [10/Jan/2012:08:08:59 +0100] [Job 15] Inserting option code into "PageSetup" section.

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %%BeginFeature: *HalftoningAlgorithm Standard

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: HalftoningAlgorithm=Standard

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Found: %% FoomaticRIPOptionSetting: HalftoningAlgorithm=Standard

D [10/Jan/2012:08:08:59 +0100] [Job 15] Option: HalftoningAlgorithm=Standard

D [10/Jan/2012:08:08:59 +0100] [Job 15] Setting option

D [10/Jan/2012:08:08:59 +0100] [Job 15] Wrote 1 pages...

D [10/Jan/2012:08:08:59 +0100] [Job 15] PID 10103 (pdftops) exited with no errors.

D [10/Jan/2012:08:08:59 +0100] [Job 15] PID 10104 (pstops) exited with no errors.

D [10/Jan/2012:08:08:59 +0100] [Job 15] Flushing FIFO.

D [10/Jan/2012:08:08:59 +0100] [Job 15]

D [10/Jan/2012:08:08:59 +0100] [Job 15] Starting renderer with command: "gs -sstdout=%stderr -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=gdi -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -r600x600 -sOutputFile=%stdout -f -_ | perl -p -e 's/PJL PAGE LETTER/PJL PAGE A4/; s/PJL PAGE (S*) AUTO/PJL PAGE $1 AUTO/; s/PJL SET TONERSAVE = OFF/PJL SET TONERSAVE = OFFrn@PJL SET ECONOMODE = OFF/; s/PJL SET PAPERTYPE = NORMAL/PJL SET PAPERTYPE = NORMAL/; s/PJL SET DENSITY = 1/PJL SET DENSITY = 3/; s/(@PJL ENTER LANGUAGE)/@PJL SET RET = OFFrn$1/; s/(@PJL ENTER LANGUAGE)/@PJL SET JAMRECOVERY = ONrn$1/; s/(@PJL ENTER LANGUAGE)/@PJL SET REPRINT = ONrn$1/; s/(@PJL ENTER LANGUAGE)/@PJL SET ALTITUDE = OFFrn$1/; s/PJL COPIES = 1/PJL COPIES = 1/; s/(@PJL ENTER LANGUAGE)/@PJL DEFAULT TIMEOUT = 15rn$1/; s/(@PJL ENTER LANGUAGE)/@PJL DEFAULT POWERSAVE = ONrn$1/; s/(@PJL ENTER LANGUAGE)/@PJL DEFAULT POWERSAVETIME = 5rn$1/; '"

D [10/Jan/2012:08:08:59 +0100] [Job 15] Starting process "kid3" (generation 1)

D [10/Jan/2012:08:08:59 +0100] [Job 15] Starting process "kid4" (generation 2)

D [10/Jan/2012:08:08:59 +0100] [Job 15] Starting process "renderer" (generation 2)

D [10/Jan/2012:08:08:59 +0100] [Job 15] JCL: %-12345X@PJL

D [10/Jan/2012:08:08:59 +0100] [Job 15] <job data>

D [10/Jan/2012:08:08:59 +0100] [Job 15]

D [10/Jan/2012:08:08:59 +0100] [Job 15]

D [10/Jan/2012:08:08:59 +0100] [Job 15] Closing renderer

D [10/Jan/2012:08:08:59 +0100] [Job 15] PAGE: 1 1

D [10/Jan/2012:08:08:59 +0100] [Job 15] Set job-printer-state-message to "impossible de localiser l’imprimante « furstoss ».", current level=ERROR

D [10/Jan/2012:08:08:59 +0100] [Job 15] renderer exited with status 141

D [10/Jan/2012:08:08:59 +0100] [Job 15] A filter used in addition to the renderer itself may have failed.kid3 exited with status 1

D [10/Jan/2012:08:08:59 +0100] [Job 15] Process is dying with "Error closing renderer

D [10/Jan/2012:08:08:59 +0100] [Job 15] ", exit stat 1

D [10/Jan/2012:08:08:59 +0100] [Job 15] Cleaning up...

D [10/Jan/2012:08:08:59 +0100] [Job 15] Backend returned status 4 (stop printer)

D [10/Jan/2012:08:08:59 +0100] [Job 15] Printer stopped due to backend errors; please consult the error_log file for details.

D [10/Jan/2012:08:08:59 +0100] [Job 15] End of messages

D [10/Jan/2012:08:08:59 +0100] [Job 15] printer-state=5(stopped)

D [10/Jan/2012:08:08:59 +0100] [Job 15] printer-state-message="impossible de localiser l’imprimante « furstoss »."

D [10/Jan/2012:08:08:59 +0100] [Job 15] printer-state-reasons=paused

E [10/Jan/2012:08:14:55 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!

E [10/Jan/2012:08:14:55 +0100] [cups-driverd] Skipping "/usr/local/share/ppd": loop detected!

E [10/Jan/2012:08:14:55 +0100] [cups-driverd] Skipping "/usr/share/ppd": loop detected!

E [10/Jan/2012:08:14:55 +0100] [cups-driverd] Skipping "/opt/share/ppd": loop detected!

E [10/Jan/2012:09:24:24 +0100] Returning HTTP Interdit for CUPS-Get-Devices (no URI) from localhost

E [10/Jan/2012:09:24:24 +0100] [CGI] CUPS-Get-Devices request failed with status 401: Interdit

E [10/Jan/2012:09:24:37 +0100] Returning HTTP Interdit for CUPS-Get-Devices (no URI) from localhost

E [10/Jan/2012:09:34:03 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!

E [10/Jan/2012:09:34:03 +0100] [cups-driverd] Skipping "/usr/local/share/ppd": loop detected!

E [10/Jan/2012:09:34:03 +0100] [cups-driverd] Skipping "/usr/share/ppd": loop detected!

E [10/Jan/2012:09:34:03 +0100] [cups-driverd] Skipping "/opt/share/ppd": loop detected!

E [10/Jan/2012:12:07:21 +0100] [Job 19] impossible d’ouvrir le fichier « /dev/lp0 » de périphérique : Permission denied

D [10/Jan/2012:12:07:22 +0100] [Job 19] The following messages were recorded from 12:07:22 to 12:07:22

D [10/Jan/2012:12:07:22 +0100] [Job 19] Job title: listeAlphaRPM2010

D [10/Jan/2012:12:07:22 +0100] [Job 19] File(s) to be printed:

D [10/Jan/2012:12:07:22 +0100] [Job 19] <STDIN>

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19] Ghostscript extra search path ('GS_LIB'): /usr/share/cups/fonts

D [10/Jan/2012:12:07:22 +0100] [Job 19] Printing system options:

D [10/Jan/2012:12:07:22 +0100] [Job 19] Pondering option 'media=A4'

D [10/Jan/2012:12:07:22 +0100] [Job 19] Pondering option 'job-uuid=urn:uuid:1ff40083-7024-3530-6ea6-81898a67c872'

D [10/Jan/2012:12:07:22 +0100] [Job 19] Unknown option job-uuid=urn:uuid:1ff40083-7024-3530-6ea6-81898a67c872.

D [10/Jan/2012:12:07:22 +0100] [Job 19] Pondering option 'job-originating-host-name=localhost'

D [10/Jan/2012:12:07:22 +0100] [Job 19] Unknown option job-originating-host-name=localhost.

D [10/Jan/2012:12:07:22 +0100] [Job 19] Pondering option 'time-at-creation=1326184625'

D [10/Jan/2012:12:07:22 +0100] [Job 19] Unknown option time-at-creation=1326184625.

D [10/Jan/2012:12:07:22 +0100] [Job 19] Pondering option 'time-at-processing=1326193641'

D [10/Jan/2012:12:07:22 +0100] [Job 19] Unknown option time-at-processing=1326193641.

D [10/Jan/2012:12:07:22 +0100] [Job 19] Pondering option 'AP_D_InputSlot='

D [10/Jan/2012:12:07:22 +0100] [Job 19] Unknown option AP_D_InputSlot=.

D [10/Jan/2012:12:07:22 +0100] [Job 19] Options from the PPD file:

D [10/Jan/2012:12:07:22 +0100] [Job 19] Pondering option 'Resolution=300x300dpi'

D [10/Jan/2012:12:07:22 +0100] [Job 19] Pondering option 'PageSize=A4'

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19] ================================================

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19] File: <STDIN>

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19] ================================================

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19] Page = 595x842; 18,36 to 577,806

D [10/Jan/2012:12:07:22 +0100] [Job 19] slow_collate=0, slow_duplex=0, slow_order=0

D [10/Jan/2012:12:07:22 +0100] [Job 19] Before copy_comments - %!PS-Adobe-3.0

D [10/Jan/2012:12:07:22 +0100] [Job 19] %!PS-Adobe-3.0

D [10/Jan/2012:12:07:22 +0100] [Job 19] %%Creator:

D [10/Jan/2012:12:07:22 +0100] [Job 19] %%LanguageLevel: 3

D [10/Jan/2012:12:07:22 +0100] [Job 19] %%DocumentSuppliedResources: (atend)

D [10/Jan/2012:12:07:22 +0100] [Job 19] %%DocumentMedia: plain 595 842 0 () ()

D [10/Jan/2012:12:07:22 +0100] [Job 19] %%BoundingBox: 0 0 595 842

D [10/Jan/2012:12:07:22 +0100] [Job 19] %%Pages: 28

D [10/Jan/2012:12:07:22 +0100] [Job 19] %%EndComments

D [10/Jan/2012:12:07:22 +0100] [Job 19] Before copy_prolog - %%BeginDefaults

D [10/Jan/2012:12:07:22 +0100] [Job 19] Filetype: PostScript

D [10/Jan/2012:12:07:22 +0100] [Job 19] Reading PostScript input ...

D [10/Jan/2012:12:07:22 +0100] [Job 19] --> This document is DSC-conforming!

D [10/Jan/2012:12:07:22 +0100] [Job 19] Before copy_setup - %%BeginSetup

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found %RBINumCopies: 1

D [10/Jan/2012:12:07:22 +0100] [Job 19] Job claims to be DSC-conforming, but "%%BeginProlog" was missing before first line with another"%%BeginProlog" comment (is this a TeX/LaTeX/dvips-generated PostScript file?). Assuming start of "Prolog" here.

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19] -----------

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginProlog

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%EndProlog

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19] -----------

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginSetup

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginFeature: *PageSize A4

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: PageSize=A4

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: PageSize=A4

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: PageSize=A4

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginFeature: *Manualfeed Off

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: Manualfeed=Off

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: Manualfeed=Off

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: Manualfeed=Off

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginFeature: *Economode Off

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: Economode=Off

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: Economode=Off

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: Economode=Off

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginFeature: *Resolution 300x300dpi

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: Resolution=300x300dpi

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: Resolution=300x300dpi

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: Resolution=300x300dpi

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginFeature: *MediaType Normal

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: MediaType=Normal

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: MediaType=Normal

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: MediaType=Normal

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginFeature: *Density 3

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: Density=3

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: Density=3

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: Density=3

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginFeature: *JamRecovery Yes

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: JamRecovery=Yes

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: JamRecovery=Yes

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: JamRecovery=Yes

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginFeature: *AllowReprint Yes

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: AllowReprint=Yes

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: AllowReprint=Yes

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: AllowReprint=Yes

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginFeature: *Altitude Low

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: Altitude=Low

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: Altitude=Low

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: Altitude=Low

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginFeature: *Copies 1

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: Copies=1

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: Copies=1

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: Copies=1

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginFeature: *PageTimeout 15

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: PageTimeout=15

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: PageTimeout=15

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: PageTimeout=15

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginFeature: *PowerSaving On

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: PowerSaving=On

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: PowerSaving=On

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: PowerSaving=On

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginFeature: *PowerSaveTime 5

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: PowerSaveTime=5

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: PowerSaveTime=5

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: PowerSaveTime=5

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Before page loop - %%Page: 1 1

D [10/Jan/2012:12:07:22 +0100] [Job 19] Copying page 1...

D [10/Jan/2012:12:07:22 +0100] [Job 19] pagew = 559.0, pagel = 770.0

D [10/Jan/2012:12:07:22 +0100] [Job 19] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842

D [10/Jan/2012:12:07:22 +0100] [Job 19] PageLeft = 18.0, PageRight = 577.0

D [10/Jan/2012:12:07:22 +0100] [Job 19] PageTop = 806.0, PageBottom = 36.0

D [10/Jan/2012:12:07:22 +0100] [Job 19] PageWidth = 595.0, PageLength = 842.0

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%EndSetup

D [10/Jan/2012:12:07:22 +0100] [Job 19] Inserting PostScript code for CUPS' page accounting

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19] -----------

D [10/Jan/2012:12:07:22 +0100] [Job 19] New page: %%Page: 1 1

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginPageSetup

D [10/Jan/2012:12:07:22 +0100] [Job 19] Inserting option code into "PageSetup" section.

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginFeature: *HalftoningAlgorithm Standard

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: HalftoningAlgorithm=Standard

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: HalftoningAlgorithm=Standard

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: HalftoningAlgorithm=Standard

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Copying page 2...

D [10/Jan/2012:12:07:22 +0100] [Job 19] pagew = 559.0, pagel = 770.0

D [10/Jan/2012:12:07:22 +0100] [Job 19] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842

D [10/Jan/2012:12:07:22 +0100] [Job 19] PageLeft = 18.0, PageRight = 577.0

D [10/Jan/2012:12:07:22 +0100] [Job 19] PageTop = 806.0, PageBottom = 36.0

D [10/Jan/2012:12:07:22 +0100] [Job 19] PageWidth = 595.0, PageLength = 842.0

D [10/Jan/2012:12:07:22 +0100] [Job 19] New page found but previous not printed, print it now.

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%Page: 2 2

D [10/Jan/2012:12:07:22 +0100] [Job 19] --> Output goes directly to the renderer now.

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19] Starting renderer with command: "gs -sstdout=%stderr -dBATCH -dPARANOIDSAFER -dQUIET -dNOPAUSE -sDEVICE=gdi -dDEVICEWIDTHPOINTS=595 -dDEVICEHEIGHTPOINTS=842 -r300x300 -sOutputFile=%stdout -f -_ | perl -p -e 's/PJL PAGE LETTER/PJL PAGE A4/; s/PJL PAGE (S*) AUTO/PJL PAGE $1 AUTO/; s/PJL SET TONERSAVE = OFF/PJL SET TONERSAVE = OFFrn@PJL SET ECONOMODE = OFF/; s/PJL SET PAPERTYPE = NORMAL/PJL SET PAPERTYPE = NORMAL/; s/PJL SET DENSITY = 1/PJL SET DENSITY = 3/; s/(@PJL ENTER LANGUAGE)/@PJL SET RET = OFFrn$1/; s/(@PJL ENTER LANGUAGE)/@PJL SET JAMRECOVERY = ONrn$1/; s/(@PJL ENTER LANGUAGE)/@PJL SET REPRINT = ONrn$1/; s/(@PJL ENTER LANGUAGE)/@PJL SET ALTITUDE = OFFrn$1/; s/PJL COPIES = 1/PJL COPIES = 1/; s/(@PJL ENTER LANGUAGE)/@PJL DEFAULT TIMEOUT = 15rn$1/; s/(@PJL ENTER LANGUAGE)/@PJL DEFAULT POWERSAVE = ONrn$1/; s/(@PJL ENTER LANGUAGE)/@PJL DEFAULT POWERSAVETIME = 5rn$1/; '"

D [10/Jan/2012:12:07:22 +0100] [Job 19] Starting process "kid3" (generation 1)

D [10/Jan/2012:12:07:22 +0100] [Job 19] Starting process "kid4" (generation 2)

D [10/Jan/2012:12:07:22 +0100] [Job 19] Starting process "renderer" (generation 2)

D [10/Jan/2012:12:07:22 +0100] [Job 19] JCL: %-12345X@PJL

D [10/Jan/2012:12:07:22 +0100] [Job 19] <job data>

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19] -----------

D [10/Jan/2012:12:07:22 +0100] [Job 19] New page: %%Page: 2 2

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%Page: 2 2

D [10/Jan/2012:12:07:22 +0100] [Job 19] --> Output goes to the FIFO buffer now.

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginPageSetup

D [10/Jan/2012:12:07:22 +0100] [Job 19] Inserting option code into "PageSetup" section.

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%BeginFeature: *HalftoningAlgorithm Standard

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: HalftoningAlgorithm=Standard

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %% FoomaticRIPOptionSetting: HalftoningAlgorithm=Standard

D [10/Jan/2012:12:07:22 +0100] [Job 19] Option: HalftoningAlgorithm=Standard

D [10/Jan/2012:12:07:22 +0100] [Job 19] Setting option

D [10/Jan/2012:12:07:22 +0100] [Job 19] Copying page 3...

D [10/Jan/2012:12:07:22 +0100] [Job 19] pagew = 559.0, pagel = 770.0

D [10/Jan/2012:12:07:22 +0100] [Job 19] bboxx = 0, bboxy = 0, bboxw = 595, bboxl = 842

D [10/Jan/2012:12:07:22 +0100] [Job 19] PageLeft = 18.0, PageRight = 577.0

D [10/Jan/2012:12:07:22 +0100] [Job 19] PageTop = 806.0, PageBottom = 36.0

D [10/Jan/2012:12:07:22 +0100] [Job 19] PageWidth = 595.0, PageLength = 842.0

D [10/Jan/2012:12:07:22 +0100] [Job 19] New page found but previous not printed, print it now.

D [10/Jan/2012:12:07:22 +0100] [Job 19] Found: %%Page: 3 3

D [10/Jan/2012:12:07:22 +0100] [Job 19] --> Output goes directly to the renderer now.

D [10/Jan/2012:12:07:22 +0100] [Job 19]

D [10/Jan/2012:12:07:22 +0100] [Job 19] PAGE: 1 1

D [10/Jan/2012:12:07:22 +0100] [Job 19] renderer exited with status 141

D [10/Jan/2012:12:07:22 +0100] [Job 19] A filter used in addition to the renderer itself may have failed.DEBUG: PID 9326 (pstops) crashed on signal 13!

D [10/Jan/2012:12:07:22 +0100] [Job 19] PID 9325 (pdftops) crashed on signal 13!

D [10/Jan/2012:12:07:22 +0100] [Job 19] Backend returned status 1 (failed)

D [10/Jan/2012:12:07:22 +0100] [Job 19] Printer stopped due to backend errors; please consult the error_log file for details.

D [10/Jan/2012:12:07:22 +0100] [Job 19] End of messages

D [10/Jan/2012:12:07:22 +0100] [Job 19] printer-state=5(stopped)

D [10/Jan/2012:12:07:22 +0100] [Job 19] printer-state-message="impossible d’ouvrir le fichier « /dev/lp0 » de périphérique : Permission denied"

D [10/Jan/2012:12:07:22 +0100] [Job 19] printer-state-reasons=paused

E [10/Jan/2012:12:12:23 +0100] [Job 19] Stopping unresponsive job!

E [10/Jan/2012:12:14:28 +0100] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!

E [10/Jan/2012:12:14:28 +0100] [cups-driverd] Skipping "/usr/local/share/ppd": loop detected!

E [10/Jan/2012:12:14:28 +0100] [cups-driverd] Skipping "/usr/share/ppd": loop detected!

E [10/Jan/2012:12:14:28 +0100] [cups-driverd] Skipping "/opt/share/ppd": loop detected!

[/global]

acces_log

-----------------

Caché :

[global]

localhost - - [09/Jan/2012:21:04:52 +0100] "GET /admin/log/access_log HTTP/1.1" 200 0 - -

localhost - - [09/Jan/2012:21:05:00 +0100] "GET /admin/log/error_log HTTP/1.1" 200 0 - -

localhost - - [09/Jan/2012:21:05:07 +0100] "GET /admin/log/page_log HTTP/1.1" 200 0 - -

localhost - - [10/Jan/2012:07:45:54 +0100] "POST / HTTP/1.1" 401 244 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:07:45:54 +0100] "POST / HTTP/1.1" 200 995 CUPS-Get-Devices -

localhost - - [10/Jan/2012:07:49:55 +0100] "POST /admin/ HTTP/1.1" 200 62 - -

localhost - - [10/Jan/2012:07:49:55 +0100] "POST /admin/ HTTP/1.1" 200 9844 - -

localhost - - [10/Jan/2012:07:50:49 +0100] "GET /admin/log/access_log HTTP/1.1" 200 616 - -

localhost - - [10/Jan/2012:07:51:13 +0100] "GET /admin/log/error_log HTTP/1.1" 304 0 - -

localhost - - [10/Jan/2012:07:51:18 +0100] "GET /admin/log/page_log HTTP/1.1" 304 0 - -

localhost - - [10/Jan/2012:07:52:15 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 271 Create-Job successful-ok

localhost - - [10/Jan/2012:07:52:15 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 21521 Send-Document successful-ok

localhost - - [10/Jan/2012:07:52:16 +0100] "POST / HTTP/1.1" 200 345 Create-Printer-Subscription successful-ok

localhost - - [10/Jan/2012:07:56:11 +0100] "POST /admin/ HTTP/1.1" 401 184 Pause-Printer successful-ok

localhost - root [10/Jan/2012:07:56:11 +0100] "POST /admin/ HTTP/1.1" 200 184 Pause-Printer successful-ok

localhost - - [10/Jan/2012:07:56:18 +0100] "POST / HTTP/1.1" 401 244 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:07:56:18 +0100] "POST / HTTP/1.1" 200 995 CUPS-Get-Devices -

localhost - - [10/Jan/2012:07:56:18 +0100] "POST /admin/ HTTP/1.1" 401 135 Resume-Printer successful-ok

localhost - root [10/Jan/2012:07:56:18 +0100] "POST /admin/ HTTP/1.1" 200 135 Resume-Printer successful-ok

localhost - - [10/Jan/2012:07:56:37 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 271 Create-Job successful-ok

localhost - - [10/Jan/2012:07:56:37 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 21521 Send-Document successful-ok

localhost - - [10/Jan/2012:07:58:47 +0100] "POST /admin/ HTTP/1.1" 200 92 - -

localhost - - [10/Jan/2012:07:58:47 +0100] "POST /admin/ HTTP/1.1" 200 2285 - -

localhost - - [10/Jan/2012:07:58:49 +0100] "POST /admin/ HTTP/1.1" 200 115 - -

localhost - - [10/Jan/2012:07:58:49 +0100] "POST /admin/ HTTP/1.1" 401 128 CUPS-Delete-Printer successful-ok

localhost - - [10/Jan/2012:07:58:49 +0100] "POST /admin/ HTTP/1.1" 401 115 - -

localhost - - [10/Jan/2012:07:58:49 +0100] "POST /admin/ HTTP/1.1" 200 115 - -

localhost - furstoss [10/Jan/2012:07:58:56 +0100] "POST /admin/ HTTP/1.1" 200 115 - -

localhost - - [10/Jan/2012:07:58:56 +0100] "POST /admin/ HTTP/1.1" 401 128 CUPS-Delete-Printer successful-ok

localhost - furstoss [10/Jan/2012:07:58:56 +0100] "POST /admin/ HTTP/1.1" 403 128 CUPS-Delete-Printer successful-ok

localhost - furstoss [10/Jan/2012:07:58:56 +0100] "POST /admin/ HTTP/1.1" 200 1999 - -

localhost - furstoss [10/Jan/2012:07:59:56 +0100] "GET /admin/log/access_log HTTP/1.1" 200 2991 - -

localhost - - [10/Jan/2012:08:03:12 +0100] "POST /admin/ HTTP/1.1" 200 92 - -

localhost - - [10/Jan/2012:08:03:12 +0100] "POST /admin/ HTTP/1.1" 200 2285 - -

localhost - - [10/Jan/2012:08:03:14 +0100] "POST /admin/ HTTP/1.1" 200 115 - -

localhost - - [10/Jan/2012:08:03:14 +0100] "POST /admin/ HTTP/1.1" 401 128 CUPS-Delete-Printer successful-ok

localhost - - [10/Jan/2012:08:03:14 +0100] "POST /admin/ HTTP/1.1" 401 115 - -

localhost - - [10/Jan/2012:08:03:14 +0100] "POST /admin/ HTTP/1.1" 200 115 - -

localhost - - [10/Jan/2012:08:03:29 +0100] "POST /admin/ HTTP/1.1" 200 115 - -

localhost - - [10/Jan/2012:08:03:29 +0100] "POST /admin/ HTTP/1.1" 401 128 CUPS-Delete-Printer successful-ok

localhost - - [10/Jan/2012:08:03:29 +0100] "POST /admin/ HTTP/1.1" 401 115 - -

localhost - - [10/Jan/2012:08:03:29 +0100] "POST /admin/ HTTP/1.1" 200 115 - -

localhost - root [10/Jan/2012:08:03:38 +0100] "POST /admin/ HTTP/1.1" 200 115 - -

localhost - - [10/Jan/2012:08:03:38 +0100] "POST /admin/ HTTP/1.1" 401 128 CUPS-Delete-Printer successful-ok

localhost - root [10/Jan/2012:08:03:38 +0100] "POST /admin/ HTTP/1.1" 200 128 CUPS-Delete-Printer successful-ok

localhost - root [10/Jan/2012:08:03:38 +0100] "POST /admin/ HTTP/1.1" 200 2039 - -

localhost - root [10/Jan/2012:08:04:02 +0100] "POST /admin/ HTTP/1.1" 200 60 - -

localhost - - [10/Jan/2012:08:04:02 +0100] "POST / HTTP/1.1" 401 88 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:08:04:02 +0100] "POST /admin/ HTTP/1.1" 200 3006 - -

localhost - - [10/Jan/2012:08:04:28 +0100] "POST / HTTP/1.1" 401 244 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:08:04:28 +0100] "POST / HTTP/1.1" 200 712 CUPS-Get-Devices -

localhost - root [10/Jan/2012:08:04:02 +0100] "POST / HTTP/1.1" 200 1466 CUPS-Get-Devices -

localhost - - [10/Jan/2012:08:04:51 +0100] "POST /admin HTTP/1.1" 200 75 - -

localhost - - [10/Jan/2012:08:04:51 +0100] "POST /admin HTTP/1.1" 200 2671 - -

localhost - - [10/Jan/2012:08:05:37 +0100] "POST /admin HTTP/1.1" 200 124 - -

localhost - - [10/Jan/2012:08:05:37 +0100] "POST /admin HTTP/1.1" 200 3214 - -

localhost - - [10/Jan/2012:08:06:24 +0100] "POST /admin HTTP/1.1" 200 204 - -

localhost - - [10/Jan/2012:08:06:24 +0100] "POST / HTTP/1.1" 200 1535 CUPS-Get-PPDs -

localhost - - [10/Jan/2012:08:06:24 +0100] "POST /admin HTTP/1.1" 200 5444 - -

localhost - - [10/Jan/2012:08:06:43 +0100] "POST /admin HTTP/1.1" 200 2030 - -

localhost - - [10/Jan/2012:08:06:43 +0100] "POST / HTTP/1.1" 200 128397 CUPS-Get-PPDs -

localhost - - [10/Jan/2012:08:06:43 +0100] "POST /admin HTTP/1.1" 200 45429 - -

localhost - - [10/Jan/2012:08:07:17 +0100] "POST /admin HTTP/1.1" 200 2055 - -

localhost - - [10/Jan/2012:08:07:17 +0100] "POST /admin/ HTTP/1.1" 401 315 CUPS-Add-Modify-Printer successful-ok

localhost - - [10/Jan/2012:08:07:17 +0100] "POST /admin HTTP/1.1" 401 2055 - -

localhost - - [10/Jan/2012:08:07:17 +0100] "POST /admin HTTP/1.1" 200 2055 - -

localhost - root [10/Jan/2012:08:07:17 +0100] "POST /admin HTTP/1.1" 200 2055 - -

localhost - - [10/Jan/2012:08:07:17 +0100] "POST /admin/ HTTP/1.1" 401 315 CUPS-Add-Modify-Printer successful-ok

localhost - root [10/Jan/2012:08:07:17 +0100] "POST /admin/ HTTP/1.1" 200 315 CUPS-Add-Modify-Printer successful-ok

localhost - root [10/Jan/2012:08:07:17 +0100] "POST /admin HTTP/1.1" 200 14851 - -

localhost - root [10/Jan/2012:08:07:57 +0100] "POST /admin HTTP/1.1" 200 427 - -

localhost - - [10/Jan/2012:08:07:57 +0100] "POST /admin/ HTTP/1.1" 401 29097 CUPS-Add-Modify-Printer successful-ok

localhost - root [10/Jan/2012:08:07:57 +0100] "POST /admin/ HTTP/1.1" 200 29097 CUPS-Add-Modify-Printer successful-ok

localhost - root [10/Jan/2012:08:07:57 +0100] "POST /admin HTTP/1.1" 200 2425 - -

localhost - - [10/Jan/2012:08:08:58 +0100] "POST /printers/ML12010 HTTP/1.1" 200 238 Create-Job successful-ok

localhost - - [10/Jan/2012:08:08:58 +0100] "POST /printers/ML12010 HTTP/1.1" 200 21513 Send-Document successful-ok

localhost - - [10/Jan/2012:08:09:26 +0100] "POST / HTTP/1.1" 200 156 Cancel-Subscription successful-ok

localhost - - [10/Jan/2012:08:09:26 +0100] "POST / HTTP/1.1" 200 345 Create-Printer-Subscription successful-ok

localhost - root [10/Jan/2012:08:10:13 +0100] "POST /admin/ HTTP/1.1" 200 84 - -

localhost - root [10/Jan/2012:08:10:13 +0100] "POST /admin/ HTTP/1.1" 200 2253 - -

localhost - root [10/Jan/2012:08:10:15 +0100] "POST /admin/ HTTP/1.1" 200 107 - -

localhost - - [10/Jan/2012:08:10:15 +0100] "POST /admin/ HTTP/1.1" 401 120 CUPS-Delete-Printer successful-ok

localhost - root [10/Jan/2012:08:10:15 +0100] "POST /admin/ HTTP/1.1" 200 120 CUPS-Delete-Printer successful-ok

localhost - root [10/Jan/2012:08:10:15 +0100] "POST /admin/ HTTP/1.1" 200 2015 - -

localhost - - [10/Jan/2012:08:11:40 +0100] "POST / HTTP/1.1" 401 244 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:08:11:40 +0100] "POST / HTTP/1.1" 200 995 CUPS-Get-Devices -

localhost - - [10/Jan/2012:08:13:05 +0100] "POST / HTTP/1.1" 401 244 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:08:13:05 +0100] "POST / HTTP/1.1" 200 995 CUPS-Get-Devices -

localhost - - [10/Jan/2012:08:13:46 +0100] "POST / HTTP/1.1" 200 252 Create-Printer-Subscription successful-ok

localhost - - [10/Jan/2012:08:14:09 +0100] "POST / HTTP/1.1" 401 123 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:08:14:09 +0100] "POST / HTTP/1.1" 200 1646 CUPS-Get-Devices -

localhost - root [10/Jan/2012:08:14:24 +0100] "POST / HTTP/1.1" 200 198 CUPS-Get-Devices -

localhost - - [10/Jan/2012:08:14:55 +0100] "POST / HTTP/1.1" 200 4160183 CUPS-Get-PPDs -

localhost - - [10/Jan/2012:08:14:58 +0100] "POST / HTTP/1.1" 200 29085 CUPS-Get-PPD -

localhost - - [10/Jan/2012:08:16:55 +0100] "POST /admin/ HTTP/1.1" 401 29146 CUPS-Add-Modify-Printer successful-ok

localhost - root [10/Jan/2012:08:16:55 +0100] "POST /admin/ HTTP/1.1" 200 29146 CUPS-Add-Modify-Printer successful-ok

localhost - root [10/Jan/2012:08:16:55 +0100] "POST /admin/ HTTP/1.1" 200 131 Resume-Printer successful-ok

localhost - root [10/Jan/2012:08:16:55 +0100] "POST /admin/ HTTP/1.1" 200 131 CUPS-Accept-Jobs successful-ok

localhost - root [10/Jan/2012:08:16:55 +0100] "POST /admin/ HTTP/1.1" 200 131 CUPS-Set-Default successful-ok

localhost - root [10/Jan/2012:08:16:55 +0100] "POST /admin/ HTTP/1.1" 200 174 CUPS-Add-Modify-Printer successful-ok

localhost - root [10/Jan/2012:08:16:55 +0100] "POST /admin/ HTTP/1.1" 200 164 CUPS-Add-Modify-Printer successful-ok

localhost - - [10/Jan/2012:08:17:02 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 487 Print-Job successful-ok

localhost - - [10/Jan/2012:08:19:39 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 509 Create-Job successful-ok

localhost - - [10/Jan/2012:08:19:39 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 569470 Send-Document successful-ok

localhost - - [10/Jan/2012:08:25:34 +0100] "POST /admin/ HTTP/1.1" 401 184 Pause-Printer successful-ok

localhost - root [10/Jan/2012:08:25:34 +0100] "POST /admin/ HTTP/1.1" 200 184 Pause-Printer successful-ok

localhost - furstoss [10/Jan/2012:09:24:03 +0100] "GET /admin/log/access_log HTTP/1.1" 200 10114 - -

localhost - furstoss [10/Jan/2012:09:24:24 +0100] "POST /admin/ HTTP/1.1" 200 60 - -

localhost - - [10/Jan/2012:09:24:24 +0100] "POST / HTTP/1.1" 401 88 CUPS-Get-Devices successful-ok

localhost - furstoss [10/Jan/2012:09:24:24 +0100] "POST / HTTP/1.1" 403 88 CUPS-Get-Devices successful-ok

localhost - furstoss [10/Jan/2012:09:24:24 +0100] "POST /admin/ HTTP/1.1" 200 1923 - -

localhost - furstoss [10/Jan/2012:09:24:37 +0100] "POST /admin/ HTTP/1.1" 200 66 - -

localhost - - [10/Jan/2012:09:24:37 +0100] "POST / HTTP/1.1" 401 72 CUPS-Get-Devices successful-ok

localhost - furstoss [10/Jan/2012:09:24:37 +0100] "POST / HTTP/1.1" 403 72 CUPS-Get-Devices successful-ok

localhost - furstoss [10/Jan/2012:09:24:37 +0100] "POST /admin/ HTTP/1.1" 200 1894 - -

localhost - - [10/Jan/2012:09:25:16 +0100] "POST / HTTP/1.1" 200 252 Create-Printer-Subscription successful-ok

localhost - - [10/Jan/2012:09:25:30 +0100] "POST / HTTP/1.1" 401 123 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:09:25:30 +0100] "POST / HTTP/1.1" 200 1504 CUPS-Get-Devices -

localhost - root [10/Jan/2012:09:25:45 +0100] "POST / HTTP/1.1" 200 198 CUPS-Get-Devices -

localhost - - [10/Jan/2012:09:26:40 +0100] "POST /admin/ HTTP/1.1" 401 131 CUPS-Delete-Printer successful-ok

localhost - root [10/Jan/2012:09:26:40 +0100] "POST /admin/ HTTP/1.1" 200 131 CUPS-Delete-Printer successful-ok

localhost - - [10/Jan/2012:09:28:59 +0100] "POST /admin/ HTTP/1.1" 200 66 - -

localhost - - [10/Jan/2012:09:28:59 +0100] "POST / HTTP/1.1" 401 72 CUPS-Get-Devices successful-ok

localhost - - [10/Jan/2012:09:28:59 +0100] "POST /admin/ HTTP/1.1" 200 1894 - -

localhost - - [10/Jan/2012:09:29:37 +0100] "POST /admin/ HTTP/1.1" 200 66 - -

localhost - - [10/Jan/2012:09:29:37 +0100] "POST / HTTP/1.1" 401 72 CUPS-Get-Devices successful-ok

localhost - - [10/Jan/2012:09:29:37 +0100] "POST /admin/ HTTP/1.1" 200 1894 - -

localhost - - [10/Jan/2012:09:29:45 +0100] "POST /admin/ HTTP/1.1" 200 60 - -

localhost - - [10/Jan/2012:09:29:45 +0100] "POST / HTTP/1.1" 401 88 CUPS-Get-Devices successful-ok

localhost - - [10/Jan/2012:09:29:45 +0100] "POST /admin/ HTTP/1.1" 401 60 - -

localhost - - [10/Jan/2012:09:29:45 +0100] "POST /admin/ HTTP/1.1" 200 60 - -

localhost - root [10/Jan/2012:09:30:01 +0100] "POST /admin/ HTTP/1.1" 200 60 - -

localhost - - [10/Jan/2012:09:30:01 +0100] "POST / HTTP/1.1" 401 88 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:09:30:01 +0100] "POST /admin/ HTTP/1.1" 200 5132 - -

localhost - root [10/Jan/2012:09:30:01 +0100] "POST / HTTP/1.1" 200 1507 CUPS-Get-Devices -

localhost - - [10/Jan/2012:09:30:57 +0100] "POST /admin HTTP/1.1" 200 76 - -

localhost - - [10/Jan/2012:09:30:57 +0100] "POST /admin HTTP/1.1" 200 2673 - -

localhost - - [10/Jan/2012:09:31:40 +0100] "POST /admin HTTP/1.1" 200 74 - -

localhost - - [10/Jan/2012:09:31:40 +0100] "POST /admin HTTP/1.1" 200 2669 - -

localhost - root [10/Jan/2012:09:31:58 +0100] "POST /admin/ HTTP/1.1" 200 66 - -

localhost - - [10/Jan/2012:09:31:58 +0100] "POST / HTTP/1.1" 401 72 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:09:31:58 +0100] "POST / HTTP/1.1" 200 1208 CUPS-Get-Devices -

localhost - root [10/Jan/2012:09:31:58 +0100] "POST /admin/ HTTP/1.1" 200 1894 - -

localhost - root [10/Jan/2012:09:32:26 +0100] "GET /admin/log/access_log HTTP/1.1" 200 13453 - -

localhost - - [10/Jan/2012:09:33:18 +0100] "POST / HTTP/1.1" 200 252 Create-Printer-Subscription successful-ok

localhost - - [10/Jan/2012:09:33:40 +0100] "POST / HTTP/1.1" 401 123 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:09:33:40 +0100] "POST / HTTP/1.1" 200 1504 CUPS-Get-Devices -

localhost - - [10/Jan/2012:09:34:02 +0100] "POST / HTTP/1.1" 200 4160183 CUPS-Get-PPDs -

localhost - root [10/Jan/2012:09:33:55 +0100] "POST / HTTP/1.1" 200 198 CUPS-Get-Devices -

localhost - - [10/Jan/2012:09:34:06 +0100] "POST / HTTP/1.1" 200 29085 CUPS-Get-PPD -

localhost - - [10/Jan/2012:09:34:37 +0100] "POST /admin/ HTTP/1.1" 401 29135 CUPS-Add-Modify-Printer successful-ok

localhost - root [10/Jan/2012:09:34:37 +0100] "POST /admin/ HTTP/1.1" 200 29135 CUPS-Add-Modify-Printer successful-ok

localhost - root [10/Jan/2012:09:34:37 +0100] "POST /admin/ HTTP/1.1" 200 131 Resume-Printer successful-ok

localhost - root [10/Jan/2012:09:34:37 +0100] "POST /admin/ HTTP/1.1" 200 131 CUPS-Accept-Jobs successful-ok

localhost - root [10/Jan/2012:09:34:37 +0100] "POST /admin/ HTTP/1.1" 200 131 CUPS-Set-Default successful-ok

localhost - root [10/Jan/2012:09:34:37 +0100] "POST /admin/ HTTP/1.1" 200 174 CUPS-Add-Modify-Printer successful-ok

localhost - root [10/Jan/2012:09:34:37 +0100] "POST /admin/ HTTP/1.1" 200 157 CUPS-Add-Modify-Printer successful-ok

localhost - - [10/Jan/2012:09:35:07 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 487 Print-Job successful-ok

localhost - - [10/Jan/2012:09:37:05 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 280 Create-Job successful-ok

localhost - - [10/Jan/2012:09:37:05 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 91514 Send-Document successful-ok

localhost - - [10/Jan/2012:09:37:06 +0100] "POST / HTTP/1.1" 200 345 Create-Printer-Subscription successful-ok

localhost - - [10/Jan/2012:12:07:22 +0100] "POST / HTTP/1.1" 200 252 Create-Printer-Subscription successful-ok

localhost - - [10/Jan/2012:12:07:22 +0100] "POST / HTTP/1.1" 200 345 Create-Printer-Subscription successful-ok

localhost - - [10/Jan/2012:12:08:59 +0100] "POST / HTTP/1.1" 401 123 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:12:08:59 +0100] "POST / HTTP/1.1" 200 1542 CUPS-Get-Devices -

localhost - - [10/Jan/2012:12:08:59 +0100] "POST / HTTP/1.1" 401 123 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:12:08:59 +0100] "POST / HTTP/1.1" 200 198 CUPS-Get-Devices -

localhost - - [10/Jan/2012:12:10:12 +0100] "POST / HTTP/1.1" 401 244 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:12:10:12 +0100] "POST / HTTP/1.1" 200 995 CUPS-Get-Devices -

localhost - - [10/Jan/2012:12:12:33 +0100] "POST / HTTP/1.1" 401 244 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:12:12:33 +0100] "POST / HTTP/1.1" 200 995 CUPS-Get-Devices -

localhost - - [10/Jan/2012:12:14:01 +0100] "POST /admin/ HTTP/1.1" 401 131 CUPS-Delete-Printer successful-ok

localhost - root [10/Jan/2012:12:14:01 +0100] "POST /admin/ HTTP/1.1" 200 131 CUPS-Delete-Printer successful-ok

localhost - - [10/Jan/2012:12:14:05 +0100] "POST / HTTP/1.1" 401 123 CUPS-Get-Devices successful-ok

localhost - root [10/Jan/2012:12:14:05 +0100] "POST / HTTP/1.1" 200 1646 CUPS-Get-Devices -

localhost - - [10/Jan/2012:12:14:20 +0100] "POST / HTTP/1.1" 401 123 CUPS-Get-Devices successful-ok

localhost - - [10/Jan/2012:12:14:28 +0100] "POST / HTTP/1.1" 200 3892424 CUPS-Get-PPDs -

localhost - - [10/Jan/2012:12:14:32 +0100] "POST / HTTP/1.1" 200 29085 CUPS-Get-PPD -

localhost - root [10/Jan/2012:12:14:20 +0100] "POST / HTTP/1.1" 200 198 CUPS-Get-Devices -

localhost - - [10/Jan/2012:12:14:59 +0100] "POST /admin/ HTTP/1.1" 401 29134 CUPS-Add-Modify-Printer successful-ok

localhost - root [10/Jan/2012:12:14:59 +0100] "POST /admin/ HTTP/1.1" 200 29134 CUPS-Add-Modify-Printer successful-ok

localhost - - [10/Jan/2012:12:14:59 +0100] "POST /admin/ HTTP/1.1" 401 131 Resume-Printer successful-ok

localhost - root [10/Jan/2012:12:14:59 +0100] "POST /admin/ HTTP/1.1" 200 131 Resume-Printer successful-ok

localhost - - [10/Jan/2012:12:14:59 +0100] "POST /admin/ HTTP/1.1" 401 131 CUPS-Accept-Jobs successful-ok

localhost - root [10/Jan/2012:12:14:59 +0100] "POST /admin/ HTTP/1.1" 200 131 CUPS-Accept-Jobs successful-ok

localhost - - [10/Jan/2012:12:14:59 +0100] "POST /admin/ HTTP/1.1" 401 131 CUPS-Set-Default successful-ok

localhost - root [10/Jan/2012:12:14:59 +0100] "POST /admin/ HTTP/1.1" 200 131 CUPS-Set-Default successful-ok

localhost - - [10/Jan/2012:12:14:59 +0100] "POST /admin/ HTTP/1.1" 401 174 CUPS-Add-Modify-Printer successful-ok

localhost - root [10/Jan/2012:12:14:59 +0100] "POST /admin/ HTTP/1.1" 200 174 CUPS-Add-Modify-Printer successful-ok

localhost - - [10/Jan/2012:12:14:59 +0100] "POST /admin/ HTTP/1.1" 401 152 CUPS-Add-Modify-Printer successful-ok

localhost - root [10/Jan/2012:12:14:59 +0100] "POST /admin/ HTTP/1.1" 200 152 CUPS-Add-Modify-Printer successful-ok

localhost - - [10/Jan/2012:12:15:28 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 275 Create-Job successful-ok

localhost - - [10/Jan/2012:12:15:28 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 17467 Send-Document successful-ok

localhost - - [10/Jan/2012:12:16:35 +0100] "POST /admin/ HTTP/1.1" 200 66 - -

localhost - - [10/Jan/2012:12:16:35 +0100] "POST / HTTP/1.1" 401 72 CUPS-Get-Devices successful-ok

localhost - - [10/Jan/2012:12:16:35 +0100] "POST /admin/ HTTP/1.1" 200 1894 - -

localhost - - [10/Jan/2012:12:18:28 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 509 Create-Job successful-ok

localhost - - [10/Jan/2012:12:18:28 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 569470 Send-Document successful-ok

localhost - - [10/Jan/2012:12:18:56 +0100] "POST /admin/ HTTP/1.1" 401 184 Pause-Printer successful-ok

localhost - root [10/Jan/2012:12:18:56 +0100] "POST /admin/ HTTP/1.1" 200 184 Pause-Printer successful-ok

localhost - - [10/Jan/2012:18:09:49 +0100] "GET /admin/log/access_log HTTP/1.1" 200 19425 - -

localhost - - [10/Jan/2012:18:10:12 +0100] "GET /admin/log/error_log HTTP/1.1" 200 33266 - -

localhost - - [10/Jan/2012:18:10:32 +0100] "GET /admin/log/page_log HTTP/1.1" 200 1266 - -

localhost - - [11/Jan/2012:07:48:23 +0100] "POST / HTTP/1.1" 401 244 CUPS-Get-Devices successful-ok

localhost - root [11/Jan/2012:07:48:23 +0100] "POST / HTTP/1.1" 200 995 CUPS-Get-Devices -

localhost - - [11/Jan/2012:07:48:23 +0100] "POST /admin/ HTTP/1.1" 401 135 Resume-Printer successful-ok

localhost - root [11/Jan/2012:07:48:23 +0100] "POST /admin/ HTTP/1.1" 200 135 Resume-Printer successful-ok

localhost - - [11/Jan/2012:07:54:08 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 293 Create-Job successful-ok

localhost - - [11/Jan/2012:07:54:08 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 25507 Send-Document successful-ok

localhost - - [11/Jan/2012:07:54:09 +0100] "POST / HTTP/1.1" 200 345 Create-Printer-Subscription successful-ok

localhost - - [11/Jan/2012:07:56:03 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 293 Create-Job successful-ok

localhost - - [11/Jan/2012:07:56:03 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 74803 Send-Document successful-ok

localhost - - [11/Jan/2012:08:00:16 +0100] "POST /admin/ HTTP/1.1" 401 184 Pause-Printer successful-ok

localhost - root [11/Jan/2012:08:00:16 +0100] "POST /admin/ HTTP/1.1" 200 184 Pause-Printer successful-ok

localhost - - [11/Jan/2012:08:01:37 +0100] "POST / HTTP/1.1" 401 244 CUPS-Get-Devices successful-ok

localhost - root [11/Jan/2012:08:01:37 +0100] "POST / HTTP/1.1" 200 995 CUPS-Get-Devices -

localhost - - [11/Jan/2012:08:01:37 +0100] "POST /admin/ HTTP/1.1" 401 135 Resume-Printer successful-ok

localhost - root [11/Jan/2012:08:01:37 +0100] "POST /admin/ HTTP/1.1" 200 135 Resume-Printer successful-ok

localhost - - [11/Jan/2012:08:04:00 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 293 Create-Job successful-ok

localhost - - [11/Jan/2012:08:04:00 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 74803 Send-Document successful-ok

localhost - - [11/Jan/2012:08:06:42 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 271 Create-Job successful-ok

localhost - - [11/Jan/2012:08:06:42 +0100] "POST /printers/Samsung-ML-1210 HTTP/1.1" 200 21515 Send-Document successful-ok

localhost - - [11/Jan/2012:08:10:27 +0100] "POST /admin/ HTTP/1.1" 401 184 Pause-Printer successful-ok

localhost - root [11/Jan/2012:08:10:27 +0100] "POST /admin/ HTTP/1.1" 200 184 Pause-Printer successful-ok

localhost - - [11/Jan/2012:08:11:13 +0100] "POST /admin/ HTTP/1.1" 200 62 - -

localhost - - [11/Jan/2012:08:11:13 +0100] "POST /admin/ HTTP/1.1" 200 11243 - -

localhost - - [11/Jan/2012:08:12:42 +0100] "GET /admin/log/access_log HTTP/1.1" 200 22159 - -

localhost - - [11/Jan/2012:08:15:36 +0100] "GET /admin/log/error_log HTTP/1.1" 200 33266 - -

localhost - - [11/Jan/2012:08:15:50 +0100] "GET /admin/log/page_log HTTP/1.1" 200 1617 - -

[/global]

------------------

en m'excusant de la longueur

Répondre

Vous n'êtes pas autorisé à écrire dans cette catégorie

Notre Mission	Liens du site	Nous joindre	MLO est hébergé par
MLO est le forum francophone de la distribution Mageia et vous propose également un portail dédié aux débutants. MLO vous apporte un support sur la distribution grâce à son forum et vous offre des nouvelles de la distribution, des logiciels libres et de l'Open Source en général. Notre site a aussi pour but de vous montrer que Mageia est un système d'exploitation complet et facile à prendre en main. Vous apprendrez à installer simplement et à administrer efficacement votre système en un temps record.	Forum Documentation News du libre Mageia	Contacter MLO Mastodon MLO Flux RSS	MLO est un projet soutenu par Nos partenaires et amis
MLO est mis à disposition selon les termes de la licence Creative Commons.

maumau Membre non connecté

Visiteur

maumau Membre non connecté

PaLmAs Membre non connecté

maumau Membre non connecté

maumau Membre non connecté

paradise Membre non connecté

maumau Membre non connecté

paradise Membre non connecté

maumau Membre non connecté