Network HS
Impossible de l'activer
Système et matériels / Réseau Internet Wi-Fi

squid-f Membre non connecté
-
- Voir le profil du membre squid-f
- Inscrit le : 03/04/2016
- Groupes :
-
Membre d'Honneur
Reprise du message précédent
Bonjour zatox et j’espère que les vacances ont été bonnes.Après le « disable », j’avais indiqué de redémarrer la machine. Dans ce cas, modemmanager ne doit pas redémarrer.
Cela permet aussi de vérifier si network reste actif.
As-tu bien redémarré la machine ?
Depuis, après les mésaventures de joel, je crains que le souci ne vienne pas de là. Network s’arrête aussi pour lui et il n’a pas modemmanager d’actif.... à suivre...
A+
« Plus les hommes seront éclairés et plus ils seront libres. » ~ Voltaire

zatox Membre non connecté
-
- Voir le profil du membre zatox
- Inscrit le : 27/09/2011
- Groupes :
squid-f :
Bonjour zatox et j’espère que les vacances ont été bonnes.
Oui très bonnes, je te remercie.
Bon je refais les tests:
systemctl status ModemManager donne ceci:
Caché :
[root@allinone-mga8-sda1 robert]# systemctl status ModemManager
● ModemManager.service - Modem Manager
Loaded: loaded (/usr/lib/systemd/system/ModemManager.service; disabled; vendor preset: enabled)
Active: active (running) since Thu 2021-07-22 08:28:04 CEST; 1min 19s ago
Main PID: 370611 (ModemManager)
Tasks: 3 (limit: 19032)
Memory: 5.1M
CPU: 113ms
CGroup: /system.slice/ModemManager.service
└─370611 /usr/sbin/ModemManager
juil. 22 08:28:03 allinone-mga8-sda1 systemd[1]: Starting Modem Manager...
juil. 22 08:28:04 allinone-mga8-sda1 ModemManager[370611]: <info> ModemManager (version 1.14.10) starting in system bus...
juil. 22 08:28:04 allinone-mga8-sda1 systemd[1]: Started Modem Manager.
juil. 22 08:28:06 allinone-mga8-sda1 ModemManager[370611]: <info> [base-manager] couldn't check support for device '/sys/de>
juil. 22 08:28:06 allinone-mga8-sda1 ModemManager[370611]: <info> [base-manager] couldn't check support for device '/sys/de>
[root@allinone-mga8-sda1 robert]#
● ModemManager.service - Modem Manager
Loaded: loaded (/usr/lib/systemd/system/ModemManager.service; disabled; vendor preset: enabled)
Active: active (running) since Thu 2021-07-22 08:28:04 CEST; 1min 19s ago
Main PID: 370611 (ModemManager)
Tasks: 3 (limit: 19032)
Memory: 5.1M
CPU: 113ms
CGroup: /system.slice/ModemManager.service
└─370611 /usr/sbin/ModemManager
juil. 22 08:28:03 allinone-mga8-sda1 systemd[1]: Starting Modem Manager...
juil. 22 08:28:04 allinone-mga8-sda1 ModemManager[370611]: <info> ModemManager (version 1.14.10) starting in system bus...
juil. 22 08:28:04 allinone-mga8-sda1 systemd[1]: Started Modem Manager.
juil. 22 08:28:06 allinone-mga8-sda1 ModemManager[370611]: <info> [base-manager] couldn't check support for device '/sys/de>
juil. 22 08:28:06 allinone-mga8-sda1 ModemManager[370611]: <info> [base-manager] couldn't check support for device '/sys/de>
[root@allinone-mga8-sda1 robert]#
Ensuite:
systemctl disable ModemManager donne ceci:
Caché :
[root@allinone-mga8-sda1 robert]# systemctl disable ModemManager
[root@allinone-mga8-sda1 robert]#
[root@allinone-mga8-sda1 robert]#
Maintenant je redémarre la machine ...
Me re-voici, j'ai donc redémarré la machine, je continue:
La commande systemctl status network donne ceci:
Caché :
[root@allinone-mga8-sda1 robert]# systemctl status network
● network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network; generated)
Active: failed (Result: exit-code) since Thu 2021-07-22 08:38:29 CEST; 3min 49s ago
Docs: man:systemd-sysv-generator(8)
Process: 1730 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)
CPU: 1.590s
juil. 22 08:38:29 allinone-mga8-sda1 systemd[1]: network.service: Consumed 1.590s CPU time.
juil. 22 08:38:29 allinone-mga8-sda1 NET[2256]: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf
juil. 22 08:38:29 allinone-mga8-sda1 ifplugd(enp3s0)[1886]: Program executed successfully.
juil. 22 08:38:33 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: Link beat detected.
juil. 22 08:38:34 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: Executing '/etc/ifplugd/ifplugd.action wlp2s0 up'.
juil. 22 08:38:34 allinone-mga8-sda1 dhclient[2647]: DHCPREQUEST for 192.168.1.54 on wlp2s0 to 255.255.255.255 port 67
juil. 22 08:38:34 allinone-mga8-sda1 dhclient[2647]: DHCPACK of 192.168.1.54 from 192.168.1.1
juil. 22 08:38:34 allinone-mga8-sda1 dhclient[2647]: bound to 192.168.1.54 -- renewal in 40409 seconds.
juil. 22 08:38:34 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: client: Determining IP information for wlp2s0... done.
juil. 22 08:38:34 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: Program executed successfully.
[root@allinone-mga8-sda1 robert]#
● network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network; generated)
Active: failed (Result: exit-code) since Thu 2021-07-22 08:38:29 CEST; 3min 49s ago
Docs: man:systemd-sysv-generator(8)
Process: 1730 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)
CPU: 1.590s
juil. 22 08:38:29 allinone-mga8-sda1 systemd[1]: network.service: Consumed 1.590s CPU time.
juil. 22 08:38:29 allinone-mga8-sda1 NET[2256]: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf
juil. 22 08:38:29 allinone-mga8-sda1 ifplugd(enp3s0)[1886]: Program executed successfully.
juil. 22 08:38:33 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: Link beat detected.
juil. 22 08:38:34 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: Executing '/etc/ifplugd/ifplugd.action wlp2s0 up'.
juil. 22 08:38:34 allinone-mga8-sda1 dhclient[2647]: DHCPREQUEST for 192.168.1.54 on wlp2s0 to 255.255.255.255 port 67
juil. 22 08:38:34 allinone-mga8-sda1 dhclient[2647]: DHCPACK of 192.168.1.54 from 192.168.1.1
juil. 22 08:38:34 allinone-mga8-sda1 dhclient[2647]: bound to 192.168.1.54 -- renewal in 40409 seconds.
juil. 22 08:38:34 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: client: Determining IP information for wlp2s0... done.
juil. 22 08:38:34 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: Program executed successfully.
[root@allinone-mga8-sda1 robert]#
et la commande systemctl status network
Caché :
[root@allinone-mga8-sda1 robert]# systemctl status network
● network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network; generated)
Active: failed (Result: exit-code) since Thu 2021-07-22 08:38:29 CEST; 6min ago
Docs: man:systemd-sysv-generator(8)
Process: 1730 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)
CPU: 1.590s
juil. 22 08:38:29 allinone-mga8-sda1 systemd[1]: network.service: Consumed 1.590s CPU time.
juil. 22 08:38:29 allinone-mga8-sda1 NET[2256]: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf
juil. 22 08:38:29 allinone-mga8-sda1 ifplugd(enp3s0)[1886]: Program executed successfully.
juil. 22 08:38:33 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: Link beat detected.
juil. 22 08:38:34 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: Executing '/etc/ifplugd/ifplugd.action wlp2s0 up'.
juil. 22 08:38:34 allinone-mga8-sda1 dhclient[2647]: DHCPREQUEST for 192.168.1.54 on wlp2s0 to 255.255.255.255 port 67
juil. 22 08:38:34 allinone-mga8-sda1 dhclient[2647]: DHCPACK of 192.168.1.54 from 192.168.1.1
juil. 22 08:38:34 allinone-mga8-sda1 dhclient[2647]: bound to 192.168.1.54 -- renewal in 40409 seconds.
juil. 22 08:38:34 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: client: Determining IP information for wlp2s0... done.
juil. 22 08:38:34 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: Program executed successfully.
[root@allinone-mga8-sda1 robert]#
● network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network; generated)
Active: failed (Result: exit-code) since Thu 2021-07-22 08:38:29 CEST; 6min ago
Docs: man:systemd-sysv-generator(8)
Process: 1730 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=1/FAILURE)
CPU: 1.590s
juil. 22 08:38:29 allinone-mga8-sda1 systemd[1]: network.service: Consumed 1.590s CPU time.
juil. 22 08:38:29 allinone-mga8-sda1 NET[2256]: /etc/sysconfig/network-scripts/ifup-post : updated /etc/resolv.conf
juil. 22 08:38:29 allinone-mga8-sda1 ifplugd(enp3s0)[1886]: Program executed successfully.
juil. 22 08:38:33 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: Link beat detected.
juil. 22 08:38:34 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: Executing '/etc/ifplugd/ifplugd.action wlp2s0 up'.
juil. 22 08:38:34 allinone-mga8-sda1 dhclient[2647]: DHCPREQUEST for 192.168.1.54 on wlp2s0 to 255.255.255.255 port 67
juil. 22 08:38:34 allinone-mga8-sda1 dhclient[2647]: DHCPACK of 192.168.1.54 from 192.168.1.1
juil. 22 08:38:34 allinone-mga8-sda1 dhclient[2647]: bound to 192.168.1.54 -- renewal in 40409 seconds.
juil. 22 08:38:34 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: client: Determining IP information for wlp2s0... done.
juil. 22 08:38:34 allinone-mga8-sda1 ifplugd(wlp2s0)[2157]: Program executed successfully.
[root@allinone-mga8-sda1 robert]#
Bon ceci dit vu que ça ne me gêne pas je crois que je vais laisser ça en l'état qu'en penses-tu ?

Carte mère Gigabyte B650 AORUS ELITE AX V1.0 WiFi
Processeur AMD® 8 coeurs RYZEN 7 - 7700X (sans ventirad)
(2) Mémoire de 16 Go DDR5 @ 5600 MHz CL46 Crucial PRO
Carte video RX 7700 XT PULSE, SAPPHIRE®, 12 Go DDR6x
Disque SSD 2 To Gen.4 NVMe Samsung M.2 990 PRO
Carte réseau AMD® M.2 WI-FI 6E RZ616
Processeur AMD® 8 coeurs RYZEN 7 - 7700X (sans ventirad)
(2) Mémoire de 16 Go DDR5 @ 5600 MHz CL46 Crucial PRO
Carte video RX 7700 XT PULSE, SAPPHIRE®, 12 Go DDR6x
Disque SSD 2 To Gen.4 NVMe Samsung M.2 990 PRO
Carte réseau AMD® M.2 WI-FI 6E RZ616

squid-f Membre non connecté
-
- Voir le profil du membre squid-f
- Inscrit le : 03/04/2016
- Groupes :
-
Membre d'Honneur

Tu m'as donné 2 fois la sortie de systemctl status network
Est-ce que ModemManager est bien arrêté ? Je pense que oui, mais c'est bien d'en être sûr.
Ensuite, avant d'arrêter les investigations, peux-tu me dire si tu étais connecté en filaire ou en wifi lors de ces derniers tests ?
Parce qu'il semble que network, avant de s'arrêter, cherche quand même à donner une IP à ton interface wifi, ce qui me parait étrange si tu es déjà connecté en filaire.
Que donne les commandes
Code BASH :
ifconfig
Code BASH :
iwconfig
A+
« Plus les hommes seront éclairés et plus ils seront libres. » ~ Voltaire

nic80 Membre non connecté
-
- Voir le profil du membre nic80
- Inscrit le : 06/08/2018
- Groupes :
-
Modérateur
Citation :
cherche quand même à donner une IP à ton interface wifi, ce qui me parait étrange
Pas pour moi...
Il me semble que network cherche à faire un ifup sur toutes les interfaces présentes (et non présentes il me semble), ce qui peut entrainer un failed de l' unité network (même si le réseau démarre (une interface en erreur et cela se fini en failed).
Il faudrait regarder si une interface orpheline ne se trouve pas dans /etc/sysconfig/network-scripts .
Certains portables peuvent avoir les interfaces filaire et wifi activent en même temps (sur les hp, c' était le cas il y a quelques années).

squid-f Membre non connecté
-
- Voir le profil du membre squid-f
- Inscrit le : 03/04/2016
- Groupes :
-
Membre d'Honneur
nic80 :
Il me semble que network cherche à faire un ifup sur toutes les interfaces présentes (et non présentes il me semble), ce qui peut entrainer un failed de l' unité network (même si le réseau démarre (une interface en erreur et cela se fini en failed).
Il faudrait regarder si une interface orpheline ne se trouve pas dans /etc/sysconfig/network-scripts .
Certains portables peuvent avoir les interfaces filaire et wifi activent en même temps (sur les hp, c' était le cas il y a quelques années).
Il me semble que network cherche à faire un ifup sur toutes les interfaces présentes (et non présentes il me semble), ce qui peut entrainer un failed de l' unité network (même si le réseau démarre (une interface en erreur et cela se fini en failed).
Il faudrait regarder si une interface orpheline ne se trouve pas dans /etc/sysconfig/network-scripts .
Certains portables peuvent avoir les interfaces filaire et wifi activent en même temps (sur les hp, c' était le cas il y a quelques années).
Merci pour ces précisions nic80.
Alors cela pourrait expliquer ce que constate zatox et ce n'est pas un souci.
J'ai une machine connectée en filaire qui a une interface wifi et network reste actif. C'est pour cela que cela m'étonnait.
Mais cela pourrait être effectivement variable d'une machine à une autre (ou d'une carte mère à une autre ?).
zatox, que donne :
Code BASH :
ls -al /etc/sysconfig/network-scripts
pour suivre la logique de nic80.
A+
« Plus les hommes seront éclairés et plus ils seront libres. » ~ Voltaire

nic80 Membre non connecté
-
- Voir le profil du membre nic80
- Inscrit le : 06/08/2018
- Groupes :
-
Modérateur
Dans /etc/rc.d/init.d/network , on peut voir ça:
Citation :
[...]
cd /etc/sysconfig/network-scripts
[...]
# find all the interfaces besides loopback.
# ignore aliases, alternative configurations, and editor backup files
interfaces=$(ls ifcfg-* | \
LC_ALL=C sed -e "$__sed_discard_ignored_files" \
-e '/\(ifcfg-lo$\|:\|ifcfg-.*-range\)/d' \
-e '/ifcfg-[ A-Za-z0-9#\._-]\+$/ { s/^ifcfg-//g;s/[0-9]/ &/}' | \
LC_ALL=C grep -v '^ifcfg-' | \
LC_ALL=C sort -k 1,1 -k 2n | \
LC_ALL=C sed -e 's/ \([0-9]\)/\1/')
[...]
cd /etc/sysconfig/network-scripts
[...]
# find all the interfaces besides loopback.
# ignore aliases, alternative configurations, and editor backup files
interfaces=$(ls ifcfg-* | \
LC_ALL=C sed -e "$__sed_discard_ignored_files" \
-e '/\(ifcfg-lo$\|:\|ifcfg-.*-range\)/d' \
-e '/ifcfg-[ A-Za-z0-9#\._-]\+$/ { s/^ifcfg-//g;s/[0-9]/ &/}' | \
LC_ALL=C grep -v '^ifcfg-' | \
LC_ALL=C sort -k 1,1 -k 2n | \
LC_ALL=C sed -e 's/ \([0-9]\)/\1/')
Il y a donc collecte de tous les fichiers ifcfg ici ( sauf ifcfg-lo par exemple).
Puis une boucle sur ce que l' on a collecté auparavant et qui lance cette ligne:
Citation :
action "Bringing up interface %s: " $i ./ifup $i boot
[ $? -ne 0 ] && rc=1
[ $? -ne 0 ] && rc=1
et la dernière ligne du fichier est :
Citation :
exit $rc
Et donc si rc est égal à 1 l' unité est considérée en échec ( même si l' interface filaire a pu démarrer).
edit:
Pour la fonctionnalité lan/wlan switching http://woshub.com/disable-wi-fi-when-ethernet-cable-connected/
Édité par nic80 Le 24/07/2021 à 13h25

zatox Membre non connecté
-
- Voir le profil du membre zatox
- Inscrit le : 27/09/2011
- Groupes :
squid-f :
Tu m'as donné 2 fois la sortie de systemctl status network
Ah oui pardon, voici le status de ModemManader:
Caché :
● ModemManager.service - Modem Manager
Loaded: loaded (/usr/lib/systemd/system/ModemManager.service; disabled; vendor preset: enabled)
Active: inactive (dead)
[root@allinone-mga8-sda1 1-tirage-aleatoire]#
Loaded: loaded (/usr/lib/systemd/system/ModemManager.service; disabled; vendor preset: enabled)
Active: inactive (dead)
[root@allinone-mga8-sda1 1-tirage-aleatoire]#
Ensuite, je suis connecté en filaire, et voici le résultat de la commande ifconfig:
Caché :
[root@allinone-mga8-sda1 1-tirage-aleatoire]# ifconfig
enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.22 netmask 255.255.255.0 broadcast 192.168.1.255
ether d8:cb:8a:fc:b8:97 txqueuelen 1000 (Ethernet)
RX packets 1119750 bytes 1387376570 (1.2 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 726215 bytes 691862683 (659.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 17
ham0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1404
ether 7a:79:00:00:00:00 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Boucle locale)
RX packets 4357 bytes 463182 (452.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4357 bytes 463182 (452.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.54 netmask 255.255.255.0 broadcast 192.168.1.255
ether 68:07:15:2e:81:64 txqueuelen 1000 (Ethernet)
RX packets 58617 bytes 23927779 (22.8 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 60 bytes 26096 (25.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@allinone-mga8-sda1 1-tirage-aleatoire]#
enp3s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.22 netmask 255.255.255.0 broadcast 192.168.1.255
ether d8:cb:8a:fc:b8:97 txqueuelen 1000 (Ethernet)
RX packets 1119750 bytes 1387376570 (1.2 GiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 726215 bytes 691862683 (659.8 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 17
ham0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1404
ether 7a:79:00:00:00:00 txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
loop txqueuelen 1000 (Boucle locale)
RX packets 4357 bytes 463182 (452.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 4357 bytes 463182 (452.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp2s0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.54 netmask 255.255.255.0 broadcast 192.168.1.255
ether 68:07:15:2e:81:64 txqueuelen 1000 (Ethernet)
RX packets 58617 bytes 23927779 (22.8 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 60 bytes 26096 (25.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
[root@allinone-mga8-sda1 1-tirage-aleatoire]#
Puis celui de la commande ls -al /etc/sysconfig/network-scripts
Caché :
[root@allinone-mga8-sda1 1-tirage-aleatoire]# ls -al /etc/sysconfig/network-scripts
total 256
drwxr-xr-x 8 root root 4096 juil. 21 09:17 ./
drwxr-xr-x 6 root root 4096 juil. 22 15:49 ../
drwxr-xr-x 2 root root 4096 août 3 2020 cellular.d/
drwxr-xr-x 2 root root 4096 juil. 19 15:50 hostname.d/
-rwxr-xr-x 1 root root 225 juil. 21 09:17 ifcfg-enp3s0*
-rw-r--r-- 1 root root 38 févr. 27 14:08 ifcfg-ham0
-rwx------ 1 root root 416 juil. 21 09:16 ifcfg-wlp2s0*
lrwxrwxrwx 1 root root 24 août 3 2020 ifdown -> ../../../usr/sbin/ifdown*
-rwxr-xr-x 1 root root 673 août 3 2020 ifdown-bnep*
drwxr-xr-x 2 root root 4096 mars 19 11:32 ifdown.d/
-rwxr-xr-x 1 root root 7679 août 3 2020 ifdown-eth*
-rwxr-xr-x 1 root root 1229 août 3 2020 ifdown-hso*
-rwxr-xr-x 1 root root 4540 août 3 2020 ifdown-ipv6*
-rwxr-xr-x 1 root root 2313 août 3 2020 ifdown-post*
-rwxr-xr-x 1 root root 1142 août 30 2014 ifdown-ppp*
-rwxr-xr-x 1 root root 873 nov. 8 2017 ifdown-routes*
-rwxr-xr-x 1 root root 1460 août 3 2020 ifdown-sit*
-rwxr-xr-x 1 root root 1490 août 3 2020 ifdown-tunnel*
lrwxrwxrwx 1 root root 22 août 3 2020 ifup -> ../../../usr/sbin/ifup*
-rwxr-xr-x 1 root root 12419 nov. 8 2017 ifup-aliases*
-rwxr-xr-x 1 root root 933 août 3 2020 ifup-bnep*
drwxr-xr-x 2 root root 4096 mars 19 11:32 ifup.d/
-rwxr-xr-x 1 root root 20758 août 3 2020 ifup-eth*
-rwxr-xr-x 1 root root 1886 août 3 2020 ifup-hso*
-rwxr-xr-x 1 root root 12054 août 3 2020 ifup-ipv6*
-rwxr-xr-x 1 root root 654 nov. 8 2017 ifup-plip*
-rwxr-xr-x 1 root root 1068 août 3 2020 ifup-plusb*
-rwxr-xr-x 1 root root 5275 août 3 2020 ifup-post*
-rwxr-xr-x 1 root root 4966 août 30 2014 ifup-ppp*
-rwxr-xr-x 1 root root 2004 nov. 8 2017 ifup-routes*
-rwxr-xr-x 1 root root 3460 août 3 2020 ifup-sit*
-rwxr-xr-x 1 root root 2766 août 3 2020 ifup-tunnel*
-rwxr-xr-x 1 root root 6279 août 3 2020 ifup-wireless*
-rwxr-xr-x 1 root root 5423 nov. 8 2017 init.ipv6-global*
-rw-r--r-- 1 root root 21040 août 3 2020 network-functions
-rw-r--r-- 1 root root 31025 nov. 8 2017 network-functions-ipv6
drwxr-xr-x 5 root root 4096 août 3 2020 vpn.d/
drwxr-xr-x 2 root root 4096 juil. 8 14:08 wireless.d/
[root@allinone-mga8-sda1 1-tirage-aleatoire]#
total 256
drwxr-xr-x 8 root root 4096 juil. 21 09:17 ./
drwxr-xr-x 6 root root 4096 juil. 22 15:49 ../
drwxr-xr-x 2 root root 4096 août 3 2020 cellular.d/
drwxr-xr-x 2 root root 4096 juil. 19 15:50 hostname.d/
-rwxr-xr-x 1 root root 225 juil. 21 09:17 ifcfg-enp3s0*
-rw-r--r-- 1 root root 38 févr. 27 14:08 ifcfg-ham0
-rwx------ 1 root root 416 juil. 21 09:16 ifcfg-wlp2s0*
lrwxrwxrwx 1 root root 24 août 3 2020 ifdown -> ../../../usr/sbin/ifdown*
-rwxr-xr-x 1 root root 673 août 3 2020 ifdown-bnep*
drwxr-xr-x 2 root root 4096 mars 19 11:32 ifdown.d/
-rwxr-xr-x 1 root root 7679 août 3 2020 ifdown-eth*
-rwxr-xr-x 1 root root 1229 août 3 2020 ifdown-hso*
-rwxr-xr-x 1 root root 4540 août 3 2020 ifdown-ipv6*
-rwxr-xr-x 1 root root 2313 août 3 2020 ifdown-post*
-rwxr-xr-x 1 root root 1142 août 30 2014 ifdown-ppp*
-rwxr-xr-x 1 root root 873 nov. 8 2017 ifdown-routes*
-rwxr-xr-x 1 root root 1460 août 3 2020 ifdown-sit*
-rwxr-xr-x 1 root root 1490 août 3 2020 ifdown-tunnel*
lrwxrwxrwx 1 root root 22 août 3 2020 ifup -> ../../../usr/sbin/ifup*
-rwxr-xr-x 1 root root 12419 nov. 8 2017 ifup-aliases*
-rwxr-xr-x 1 root root 933 août 3 2020 ifup-bnep*
drwxr-xr-x 2 root root 4096 mars 19 11:32 ifup.d/
-rwxr-xr-x 1 root root 20758 août 3 2020 ifup-eth*
-rwxr-xr-x 1 root root 1886 août 3 2020 ifup-hso*
-rwxr-xr-x 1 root root 12054 août 3 2020 ifup-ipv6*
-rwxr-xr-x 1 root root 654 nov. 8 2017 ifup-plip*
-rwxr-xr-x 1 root root 1068 août 3 2020 ifup-plusb*
-rwxr-xr-x 1 root root 5275 août 3 2020 ifup-post*
-rwxr-xr-x 1 root root 4966 août 30 2014 ifup-ppp*
-rwxr-xr-x 1 root root 2004 nov. 8 2017 ifup-routes*
-rwxr-xr-x 1 root root 3460 août 3 2020 ifup-sit*
-rwxr-xr-x 1 root root 2766 août 3 2020 ifup-tunnel*
-rwxr-xr-x 1 root root 6279 août 3 2020 ifup-wireless*
-rwxr-xr-x 1 root root 5423 nov. 8 2017 init.ipv6-global*
-rw-r--r-- 1 root root 21040 août 3 2020 network-functions
-rw-r--r-- 1 root root 31025 nov. 8 2017 network-functions-ipv6
drwxr-xr-x 5 root root 4096 août 3 2020 vpn.d/
drwxr-xr-x 2 root root 4096 juil. 8 14:08 wireless.d/
[root@allinone-mga8-sda1 1-tirage-aleatoire]#

Carte mère Gigabyte B650 AORUS ELITE AX V1.0 WiFi
Processeur AMD® 8 coeurs RYZEN 7 - 7700X (sans ventirad)
(2) Mémoire de 16 Go DDR5 @ 5600 MHz CL46 Crucial PRO
Carte video RX 7700 XT PULSE, SAPPHIRE®, 12 Go DDR6x
Disque SSD 2 To Gen.4 NVMe Samsung M.2 990 PRO
Carte réseau AMD® M.2 WI-FI 6E RZ616
Processeur AMD® 8 coeurs RYZEN 7 - 7700X (sans ventirad)
(2) Mémoire de 16 Go DDR5 @ 5600 MHz CL46 Crucial PRO
Carte video RX 7700 XT PULSE, SAPPHIRE®, 12 Go DDR6x
Disque SSD 2 To Gen.4 NVMe Samsung M.2 990 PRO
Carte réseau AMD® M.2 WI-FI 6E RZ616

squid-f Membre non connecté
-
- Voir le profil du membre squid-f
- Inscrit le : 03/04/2016
- Groupes :
-
Membre d'Honneur

donc, tes 2 interfaces ont été démarrées et des adresses IP différentes ont été affectées à ton interface filaire (192.168.1.22) et ton interface wifi (192.168.1.54).
Je ne sais pas pourquoi par contre network termine en status "failed" alors que dans les 2 cas, il affiche "Program executed successfully".
Peut-être que nic80 sera nous le dire ?
Personnellement, je craindrais un conflit ou des latences avec les 2 interfaces activées, mais j'ai peut-être tort.
Je regarderais quand même le lien de nic80 pour voir si tu as un paramètre dans le bios qui te permette de désactiver le wifi si la connexion filaire est active : http://woshub.com/disable-wi-fi-when-ethernet-cable-connected/
A+
« Plus les hommes seront éclairés et plus ils seront libres. » ~ Voltaire

nic80 Membre non connecté
-
- Voir le profil du membre nic80
- Inscrit le : 06/08/2018
- Groupes :
-
Modérateur
Dans le "ls -al /etc/sysconfig/network-scripts", on voit qu' il y a une interface ham0. Peut être que celle ci n' est pas sur le pc portable ?
On ne voit pas de status sur cette interface dans le systemctl status network, mais je suppose que cette carte est potentiellement configurée ET démarrée au boot ( un "su -c "cat /etc/sysconfig/network-scripts/ifcfg-ham0 | grep -i onboot"" doit permettre de le savoir ( onboot=YES indique que la carte réseau est initialisée au démarrage).

squid-f Membre non connecté
-
- Voir le profil du membre squid-f
- Inscrit le : 03/04/2016
- Groupes :
-
Membre d'Honneur
ifconfig voit bien l'interface ham0
Je ne connaissais pas cette interface et une rapide recherche indique que cela pourrait être lié à la création d'un réseau VPN local par l'application Hamachi
https://www.commentcamarche.net/download/telecharger-34055111-hamachi
@zatox, as-tu créé quelque chose de ce type ?
A+
« Plus les hommes seront éclairés et plus ils seront libres. » ~ Voltaire

zatox Membre non connecté
-
- Voir le profil du membre zatox
- Inscrit le : 27/09/2011
- Groupes :
squid-f :
@zatox, as-tu créé quelque chose de ce type ?
Oui il y a quelques temps j'avais créé un réseau VPN local pour voir comment ça marchait, par contre par l'application Hamachi euh !! je ne sais plus, c'est possible ...

Carte mère Gigabyte B650 AORUS ELITE AX V1.0 WiFi
Processeur AMD® 8 coeurs RYZEN 7 - 7700X (sans ventirad)
(2) Mémoire de 16 Go DDR5 @ 5600 MHz CL46 Crucial PRO
Carte video RX 7700 XT PULSE, SAPPHIRE®, 12 Go DDR6x
Disque SSD 2 To Gen.4 NVMe Samsung M.2 990 PRO
Carte réseau AMD® M.2 WI-FI 6E RZ616
Processeur AMD® 8 coeurs RYZEN 7 - 7700X (sans ventirad)
(2) Mémoire de 16 Go DDR5 @ 5600 MHz CL46 Crucial PRO
Carte video RX 7700 XT PULSE, SAPPHIRE®, 12 Go DDR6x
Disque SSD 2 To Gen.4 NVMe Samsung M.2 990 PRO
Carte réseau AMD® M.2 WI-FI 6E RZ616

squid-f Membre non connecté
-
- Voir le profil du membre squid-f
- Inscrit le : 03/04/2016
- Groupes :
-
Membre d'Honneur
Je regarderais éventuellement dans le bios (lien de nic80) pour désactiver le wifi si le câble ethernet est branché.
A toi de voir.
A+
« Plus les hommes seront éclairés et plus ils seront libres. » ~ Voltaire

zatox Membre non connecté
-
- Voir le profil du membre zatox
- Inscrit le : 27/09/2011
- Groupes :
status-network.txt
journalctl.txt
Si toutefois quelqu'un a une idée ?
Sinon je crois que je vais être obligé de ré-installer


Carte mère Gigabyte B650 AORUS ELITE AX V1.0 WiFi
Processeur AMD® 8 coeurs RYZEN 7 - 7700X (sans ventirad)
(2) Mémoire de 16 Go DDR5 @ 5600 MHz CL46 Crucial PRO
Carte video RX 7700 XT PULSE, SAPPHIRE®, 12 Go DDR6x
Disque SSD 2 To Gen.4 NVMe Samsung M.2 990 PRO
Carte réseau AMD® M.2 WI-FI 6E RZ616
Processeur AMD® 8 coeurs RYZEN 7 - 7700X (sans ventirad)
(2) Mémoire de 16 Go DDR5 @ 5600 MHz CL46 Crucial PRO
Carte video RX 7700 XT PULSE, SAPPHIRE®, 12 Go DDR6x
Disque SSD 2 To Gen.4 NVMe Samsung M.2 990 PRO
Carte réseau AMD® M.2 WI-FI 6E RZ616

gerard-ll Membre non connecté
-
- Voir le profil du membre gerard-ll
- Inscrit le : 09/12/2011
- Groupes :
zatox :
Sinon je crois que je vais être obligé de ré-installer 

Oui et de recompiler FlightGear!!

Pal mal Mageia!
@+
Gérard
@+
Gérard

zatox Membre non connecté
-
- Voir le profil du membre zatox
- Inscrit le : 27/09/2011
- Groupes :
gerard-ll :
Oui et de recompiler FlightGear!!
Ouiiii mais pas que ... et ré-installer tout le tremblement aussi

Même si j'ai un fichier dans lequel j'ai:
urpmi suivi de tous les logiciels, ça risque d'être un peu long et en plus je ne suis pas sûr que ce fichier soit totalement à jour.

Carte mère Gigabyte B650 AORUS ELITE AX V1.0 WiFi
Processeur AMD® 8 coeurs RYZEN 7 - 7700X (sans ventirad)
(2) Mémoire de 16 Go DDR5 @ 5600 MHz CL46 Crucial PRO
Carte video RX 7700 XT PULSE, SAPPHIRE®, 12 Go DDR6x
Disque SSD 2 To Gen.4 NVMe Samsung M.2 990 PRO
Carte réseau AMD® M.2 WI-FI 6E RZ616
Processeur AMD® 8 coeurs RYZEN 7 - 7700X (sans ventirad)
(2) Mémoire de 16 Go DDR5 @ 5600 MHz CL46 Crucial PRO
Carte video RX 7700 XT PULSE, SAPPHIRE®, 12 Go DDR6x
Disque SSD 2 To Gen.4 NVMe Samsung M.2 990 PRO
Carte réseau AMD® M.2 WI-FI 6E RZ616

nic80 Membre non connecté
-
- Voir le profil du membre nic80
- Inscrit le : 06/08/2018
- Groupes :
-
Modérateur
On dirais que le ifplug est lancé plusieurs fois par le systéme sur les interfaces (ce qui fait qu' elles ne sont peut être pas initialisées, donc pas de réseau).
Par contre, je ne sais pas comment on fait le ménage...
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie