problème UEFI et ACPI ? [Réglé]
pour installer mga sur un Asus
Système et matériels / Installation et configuration
Petronov Membre non connecté
-
- Voir le profil du membre Petronov
- Inscrit le : 17/04/2009
- Groupes :
-
Membre d'Honneur
Je voudrais installer Mga en écrasant Windows sur un ordinateur Asus.
Je suis parti du Live sur usb pour voir si ça démarre. Mais en fait non... Je ne sais pas si c'est un problème de boot ou de clef usb... (je l'ai faite avec Rufus)
Dans le boot, j'ai désactivé le sécure boot, le fast boot et quant à "launch csm", j'ai essayé avec et sans. Je n'ai pas bien compris son rapport à Legacy.
Quand Mageia se lance, j'ai une erreur acpi
https://photos.app.goo.gl/QrKNCNkroR7H864f8
et ce message :
Citation :
sdb : No caching mode page found
sbd : Assuming drive cache, write though
sbd : Assuming drive cache, write though
Ensuite, le démarrage commence correctement et tout bloque où le Boot Screen de Plymouth doit s'interrompre.*
A partir de là, plus rien...
https://photos.app.goo.gl/anaD3BWtphvk1yf6A
Je ne sais pas si le problème vient de la clef ou du boot... J'ai le même comportement si je demande l'installation directement.
Merci beaucoup de vos suggestions.
Édité par Petronov Le 16/07/2020 à 16h33
Petronov Membre non connecté
-
- Voir le profil du membre Petronov
- Inscrit le : 17/04/2009
- Groupes :
-
Membre d'Honneur
Plutôt que d'essayer de démarrer en legacy, je vais réessayer en déclarant ma clef en UEFI (non CSM) sur Rufus.
Je viens de voir que l'option existe.
EDIT : les erreurs sont toujours là... Mais le Live s'est chargé...
Édité par Petronov Le 16/07/2020 à 16h49
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
Normalement, avec Rufus, tu n'as pas à choisir entre UEFI/Legacy. Tu dois prendre l'option d'écrire une image ISO.
L'ACPI est un problème entre le BIOS et le noyau. Ce n'est pas quelque chose que tu peux régler, sinon avec une éventuelle mise à jour du BIOS.
Quel est la carte graphique ?
A la fin du démarrage, tu peux faire Ctrl-Alt-F3 déclarer l'utilisateur root et explorer s'il existe un fichier /var/log/Xorg.0.log et voir son contenu avec la commande less.
C'est Plasma/Gnome ou XFCE ?
nic80 Membre non connecté
-
- Voir le profil du membre nic80
- Inscrit le : 06/08/2018
- Groupes :
-
Modérateur
Par le live s' est chargé, il faut comprendre qu' il a été possible accéder à un bureau ?
Si oui, cela voudrait dire que ce n' est pas forcément un problème de carte graphique (ou alors intermittent).
C' est un pc fixe (donc pas un pc avec double carte Intel/Nvidia ) ?
Petronov Membre non connecté
-
- Voir le profil du membre Petronov
- Inscrit le : 17/04/2009
- Groupes :
-
Membre d'Honneur
Merci de ta réponse.
Finalement, j'ai réussi à installer Mageia. En Kde.
La solution a été de ne pas passer par les pilotes non libres. Je ne vois pas bien le rapport...
Les erreurs restent indiquées au démarrage, plus quelque chose que j'ai mal lu concernant la communication avec"nouveau"...
Je ne sais pas trop quelle est la carte graphique. C'est un vieil Asus. Je vais essayer de chercher tout à l'heure.
En désactivant l'acpi, rien ne change... Mais j'ai aussi des problèmes de connexion au démarrage. Je n'arrive pas activer la connexion automatique en passant par le ccm et l'écran de connexion est assez moche. Ce n'est pas celui que j'ai chez moi. Je me dis donc que les modifications que je passe à Grub2 via le CCM ne s'enregistrent peut-être pas... y compris la désactivation de l'acpi...
nic80 Membre non connecté
-
- Voir le profil du membre nic80
- Inscrit le : 06/08/2018
- Groupes :
-
Modérateur
Pour la carte graphique, un
lspci -nn
Devralt donner l' information.
Plasma et le pilote nouveau ont quelque fois des incompatibilités, l' affichage bizarre est peut être du à ça ?
Petronov Membre non connecté
-
- Voir le profil du membre Petronov
- Inscrit le : 17/04/2009
- Groupes :
-
Membre d'Honneur
Excuse-moi, comme il y avait beaucoup d'agitation autour de moi, j'ai mis un certain temps à rédiger mon message et je n'ai pas vu le tien...
C'est un PC portable, double carte je suppose :
J'ai ceci :
VGA compatible [0300] : Intel corporation 3rd Gen Core processor graphic controller [8086:0166) (rev 09)
3D controller [0302]: NVIDIA Corporation GK107M [GeForce GT 740M] (revA1)
Je suis parvenu à accéder à un bureau (et à l'installer) en utilisant la version libre, alors que la version avec pilotes propriétaire Nvidia ne dépasse pas le boot.
Le problème maintenant, c'est que ça démarre et que ça tourne pas mal (à première vue), mais le boot est assez malpropre... L'énoncé graphique des erreurs interrompt le slash screen... et l'écran de connexion est bizarre...quel que soit celui que je choisisse et que je n'arrive pas à passer l'option de connexion automatique via le CCM.
C'est pour des amis qui veulent essayer Linux pour une première. J'aimerais leur laisser un truc qui ait l'air un peu propre pour commencer...
Je vais jeter un oeil dans le log de Xorg quand tout le monde sera couché...
Édité par Petronov Le 17/07/2020 à 01h55
Petronov Membre non connecté
-
- Voir le profil du membre Petronov
- Inscrit le : 17/04/2009
- Groupes :
-
Membre d'Honneur
Caché :
[ 47.457]
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[ 47.457] Build Operating System: rabbit 5.5.9-server-1.mga7
[ 47.457] Current Operating System: Linux localhost.localdomain 5.6.14-desktop-2.mga7 #1 SMP Wed May 20 23:14:20 UTC 2020 x86_64
[ 47.457] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.6.14-desktop-2.mga7 root=UUID=a06c9a18-f387-46a0-80b5-f4edb790307b ro splash quiet noiswmd resume=UUID=329c5d5e-1deb-4f03-919a-277487cc3149 audit=0 vga=794
[ 47.457] Build Date: 29 April 2020 08:23:25AM
[ 47.457] Build ID: x11-server 1.20.8-1.mga7
[ 47.457] Current version of pixman: 0.38.4
[ 47.457] Before reporting problems, check https://bugs.mageia.org
to make sure that you have the latest version.
[ 47.457] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 47.458] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 16 19:03:04 2020
[ 47.496] (==) Using config file: "/etc/X11/xorg.conf"
[ 47.496] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 47.496] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 47.686] (==) ServerLayout "layout1"
[ 47.686] (**) |-->Screen "screen1" (0)
[ 47.686] (**) | |-->Monitor "monitor1"
[ 47.687] (**) | |-->Device "device1"
[ 47.688] (**) Option "DontZap" "False"
[ 47.688] (**) Option "AllowMouseOpenFail"
[ 47.688] (==) Automatically adding devices
[ 47.688] (==) Automatically enabling devices
[ 47.688] (==) Automatically adding GPU devices
[ 47.688] (==) Automatically binding GPU devices
[ 47.688] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 47.688] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 47.688] (**) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 47.688] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 47.688] (II) Loader magic: 0x617d40
[ 47.688] (II) Module ABI versions:
[ 47.688] X.Org ANSI C Emulation: 0.4
[ 47.688] X.Org Video Driver: 24.1
[ 47.688] X.Org XInput driver : 24.1
[ 47.688] X.Org Server Extension : 10.0
[ 47.690] (--) using VT number 2
[ 47.691] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 47.693] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 47.693] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 47.702] (--) PCI:*(0@0:2:0) 8086:0166:1043:1587 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 47.702] (--) PCI: (1@0:0:0) 10de:0fdf:1043:1587 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 47.702] (II) Open ACPI successful (/var/run/acpid.socket)
[ 47.702] (II) "glx" will be loaded by default.
[ 47.702] (II) LoadModule: "v4l"
[ 47.718] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[ 47.718] (II) Module v4l: vendor="X.Org Foundation"
[ 47.718] compiled for 1.20.1, module version = 0.1.1
[ 47.718] ABI class: X.Org Video Driver, version 24.0
[ 47.718] (II) LoadModule: "glx"
[ 47.719] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 47.722] (II) Module glx: vendor="X.Org Foundation"
[ 47.722] compiled for 1.20.8, module version = 1.0.0
[ 47.722] ABI class: X.Org Server Extension, version 10.0
[ 47.722] (II) LoadModule: "intel"
[ 47.722] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 47.760] (II) Module intel: vendor="X.Org Foundation"
[ 47.760] compiled for 1.20.7, module version = 2.99.917
[ 47.760] Module class: X.Org Video Driver
[ 47.760] ABI class: X.Org Video Driver, version 24.1
[ 47.760] (II) v4l driver for Video4Linux overlay mode (V4L2)
[ 47.760] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 47.761] (II) intel: Driver for Intel(R) HD Graphics
[ 47.761] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 47.761] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 47.761] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 47.761] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 47.772] (WW) Falling back to old probe method for v4l
[ 47.772] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20200114
[ 47.785] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 47.785] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[ 47.785] (II) intel(0): Creating default Display subsection in Screen section
"screen1" for depth/fbbpp 24/32
[ 47.785] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 47.785] (==) intel(0): RGB weight 888
[ 47.785] (==) intel(0): Default visual is TrueColor
[ 47.786] (II) intel(0): Output LVDS1 using monitor section monitor1
[ 47.787] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 47.787] (II) intel(0): Enabled output LVDS1
[ 47.787] (II) intel(0): Output VGA1 has no monitor section
[ 47.787] (II) intel(0): Enabled output VGA1
[ 47.787] (II) intel(0): Output HDMI1 has no monitor section
[ 47.787] (II) intel(0): Enabled output HDMI1
[ 47.787] (II) intel(0): Output DP1 has no monitor section
[ 47.788] (II) intel(0): Enabled output DP1
[ 47.788] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 47.788] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 47.788] (II) intel(0): Enabled output VIRTUAL1
[ 47.788] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 47.788] (==) intel(0): TearFree disabled
[ 47.788] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 47.788] (==) intel(0): DPI set to (96, 96)
[ 47.788] (II) Loading sub module "dri3"
[ 47.788] (II) LoadModule: "dri3"
[ 47.788] (II) Module "dri3" already built-in
[ 47.788] (II) Loading sub module "dri2"
[ 47.788] (II) LoadModule: "dri2"
[ 47.788] (II) Module "dri2" already built-in
[ 47.788] (II) Loading sub module "present"
[ 47.788] (II) LoadModule: "present"
[ 47.788] (II) Module "present" already built-in
[ 47.820] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 47.820] (==) intel(0): Backing store enabled
[ 47.820] (==) intel(0): Silken mouse enabled
[ 47.820] (II) intel(0): HW Cursor enabled
[ 47.821] (**) intel(0): DPMS enabled
[ 47.821] (==) intel(0): Display hotplug detection enabled
[ 47.930] (EE) v4l: /dev/video0: no overlay support
[ 47.933] (EE) v4l: /dev/video1: no overlay support
[ 47.933] (II) intel(0): [DRI2] Setup complete
[ 47.933] (II) intel(0): [DRI2] DRI driver: i965
[ 47.933] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 47.933] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 47.933] (II) intel(0): hardware support for Present enabled
[ 47.933] (II) Initializing extension Generic Event Extension
[ 47.933] (II) Initializing extension SHAPE
[ 47.933] (II) Initializing extension MIT-SHM
[ 47.933] (II) Initializing extension XInputExtension
[ 47.934] (II) Initializing extension XTEST
[ 47.934] (II) Initializing extension BIG-REQUESTS
[ 47.934] (II) Initializing extension SYNC
[ 47.934] (II) Initializing extension XKEYBOARD
[ 48.059] (II) Initializing extension XC-MISC
[ 48.059] (II) Initializing extension XFIXES
[ 48.059] (II) Initializing extension RENDER
[ 48.059] (II) Initializing extension RANDR
[ 48.059] (II) Initializing extension COMPOSITE
[ 48.059] (II) Initializing extension DAMAGE
[ 48.059] (II) Initializing extension MIT-SCREEN-SAVER
[ 48.059] (II) Initializing extension DOUBLE-BUFFER
[ 48.059] (II) Initializing extension RECORD
[ 48.059] (II) Initializing extension DPMS
[ 48.059] (II) Initializing extension Present
[ 48.059] (II) Initializing extension DRI3
[ 48.059] (II) Initializing extension X-Resource
[ 48.059] (II) Initializing extension XVideo
[ 48.059] (II) Initializing extension XVideo-MotionCompensation
[ 48.059] (II) Initializing extension GLX
[ 48.572] (II) AIGLX: Loaded and initialized i965
[ 48.572] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 48.572] (II) Initializing extension XFree86-VidModeExtension
[ 48.572] (II) Initializing extension XFree86-DGA
[ 48.572] (II) Initializing extension XFree86-DRI
[ 48.572] (II) Initializing extension DRI2
[ 48.582] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 48.584] (II) intel(0): Setting screen physical size to 361 x 203
[ 50.061] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 50.061] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 50.061] (**) Power Button: Applying InputClass "system-keyboard"
[ 50.061] (II) LoadModule: "libinput"
[ 50.061] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 50.062] (II) Module libinput: vendor="X.Org Foundation"
[ 50.062] compiled for 1.20.3, module version = 0.28.2
[ 50.063] Module class: X.Org XInput Driver
[ 50.063] ABI class: X.Org XInput driver, version 24.1
[ 50.063] (II) Using input driver 'libinput' for 'Power Button'
[ 50.063] (**) Power Button: always reports core events
[ 50.063] (**) Option "Device" "/dev/input/event3"
[ 50.063] (**) Option "_source" "server/udev"
[ 50.160] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 50.160] (II) event3 - Power Button: device is a keyboard
[ 50.160] (II) event3 - Power Button: device removed
[ 50.165] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[ 50.165] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 50.165] (**) Option "xkb_model" "pc105"
[ 50.165] (**) Option "xkb_layout" "fr"
[ 50.165] (**) Option "xkb_options" "compose:rwin"
[ 50.254] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 50.254] (II) event3 - Power Button: device is a keyboard
[ 50.256] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event7)
[ 50.256] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 50.256] (**) Asus Wireless Radio Control: Applying InputClass "system-keyboard"
[ 50.256] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[ 50.256] (**) Asus Wireless Radio Control: always reports core events
[ 50.256] (**) Option "Device" "/dev/input/event7"
[ 50.256] (**) Option "_source" "server/udev"
[ 50.259] (II) event7 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 50.259] (II) event7 - Asus Wireless Radio Control: device is a keyboard
[ 50.259] (II) event7 - Asus Wireless Radio Control: device removed
[ 50.278] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input20/event7"
[ 50.278] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[ 50.278] (**) Option "xkb_model" "pc105"
[ 50.278] (**) Option "xkb_layout" "fr"
[ 50.278] (**) Option "xkb_options" "compose:rwin"
[ 50.280] (II) event7 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 50.280] (II) event7 - Asus Wireless Radio Control: device is a keyboard
[ 50.280] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 50.280] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 50.280] (**) Video Bus: Applying InputClass "system-keyboard"
[ 50.280] (II) Using input driver 'libinput' for 'Video Bus'
[ 50.281] (**) Video Bus: always reports core events
[ 50.281] (**) Option "Device" "/dev/input/event5"
[ 50.281] (**) Option "_source" "server/udev"
[ 50.282] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 50.282] (II) event5 - Video Bus: device is a keyboard
[ 50.282] (II) event5 - Video Bus: device removed
[ 50.290] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9/event5"
[ 50.290] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 50.290] (**) Option "xkb_model" "pc105"
[ 50.290] (**) Option "xkb_layout" "fr"
[ 50.290] (**) Option "xkb_options" "compose:rwin"
[ 50.292] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 50.292] (II) event5 - Video Bus: device is a keyboard
[ 50.293] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 50.293] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 50.293] (**) Video Bus: Applying InputClass "system-keyboard"
[ 50.293] (II) Using input driver 'libinput' for 'Video Bus'
[ 50.293] (**) Video Bus: always reports core events
[ 50.293] (**) Option "Device" "/dev/input/event4"
[ 50.293] (**) Option "_source" "server/udev"
[ 50.295] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 50.295] (II) event4 - Video Bus: device is a keyboard
[ 50.296] (II) event4 - Video Bus: device removed
[ 50.308] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input8/event4"
[ 50.308] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 50.308] (**) Option "xkb_model" "pc105"
[ 50.308] (**) Option "xkb_layout" "fr"
[ 50.308] (**) Option "xkb_options" "compose:rwin"
[ 50.312] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 50.312] (II) event4 - Video Bus: device is a keyboard
[ 50.313] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 50.314] (II) No input driver specified, ignoring this device.
[ 50.314] (II) This device may have been added with another device file.
[ 50.315] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 50.315] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 50.315] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 50.315] (II) Using input driver 'libinput' for 'Sleep Button'
[ 50.315] (**) Sleep Button: always reports core events
[ 50.315] (**) Option "Device" "/dev/input/event2"
[ 50.315] (**) Option "_source" "server/udev"
[ 50.317] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 50.317] (II) event2 - Sleep Button: device is a keyboard
[ 50.317] (II) event2 - Sleep Button: device removed
[ 50.327] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[ 50.327] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 50.327] (**) Option "xkb_model" "pc105"
[ 50.327] (**) Option "xkb_layout" "fr"
[ 50.327] (**) Option "xkb_options" "compose:rwin"
[ 50.329] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 50.329] (II) event2 - Sleep Button: device is a keyboard
[ 50.332] (II) config/udev: Adding input device Logitech M185 (/dev/input/event6)
[ 50.332] (**) Logitech M185: Applying InputClass "libinput pointer catchall"
[ 50.332] (**) Logitech M185: Applying InputClass "libinput keyboard catchall"
[ 50.332] (**) Logitech M185: Applying InputClass "system-keyboard"
[ 50.332] (II) Using input driver 'libinput' for 'Logitech M185'
[ 50.332] (**) Logitech M185: always reports core events
[ 50.332] (**) Option "Device" "/dev/input/event6"
[ 50.332] (**) Option "_source" "server/udev"
[ 50.336] (II) event6 - Logitech M185: is tagged by udev as: Keyboard Mouse
[ 50.336] (II) event6 - Logitech M185: device set to 1000 DPI
[ 50.336] (II) event6 - Logitech M185: device is a pointer
[ 50.336] (II) event6 - Logitech M185: device is a keyboard
[ 50.336] (II) event6 - Logitech M185: device removed
[ 50.341] (II) libinput: Logitech M185: needs a virtual subdevice
[ 50.341] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input19/event6"
[ 50.341] (II) XINPUT: Adding extended input device "Logitech M185" (type: MOUSE, id 11)
[ 50.341] (**) Option "AccelerationScheme" "none"
[ 50.341] (**) Logitech M185: (accel) selected scheme none/0
[ 50.341] (**) Logitech M185: (accel) acceleration factor: 2.000
[ 50.341] (**) Logitech M185: (accel) acceleration threshold: 4
[ 50.345] (II) event6 - Logitech M185: is tagged by udev as: Keyboard Mouse
[ 50.345] (II) event6 - Logitech M185: device set to 1000 DPI
[ 50.345] (II) event6 - Logitech M185: device is a pointer
[ 50.345] (II) event6 - Logitech M185: device is a keyboard
[ 50.346] (II) config/udev: Adding input device Logitech M185 (/dev/input/mouse0)
[ 50.346] (**) Logitech M185: Applying InputClass "system-keyboard"
[ 50.347] (II) No input driver specified, ignoring this device.
[ 50.347] (II) This device may have been added with another device file.
[ 50.348] (II) config/udev: Adding input device USB Camera: USB 2.0 UVC HD Webc (/dev/input/event10)
[ 50.348] (**) USB Camera: USB 2.0 UVC HD Webc: Applying InputClass "libinput keyboard catchall"
[ 50.348] (**) USB Camera: USB 2.0 UVC HD Webc: Applying InputClass "system-keyboard"
[ 50.348] (II) Using input driver 'libinput' for 'USB Camera: USB 2.0 UVC HD Webc'
[ 50.348] (**) USB Camera: USB 2.0 UVC HD Webc: always reports core events
[ 50.348] (**) Option "Device" "/dev/input/event10"
[ 50.348] (**) Option "_source" "server/udev"
[ 50.350] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: is tagged by udev as: Keyboard
[ 50.350] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: device is a keyboard
[ 50.350] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: device removed
[ 50.363] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input26/event10"
[ 50.363] (II) XINPUT: Adding extended input device "USB Camera: USB 2.0 UVC HD Webc" (type: KEYBOARD, id 12)
[ 50.363] (**) Option "xkb_model" "pc105"
[ 50.363] (**) Option "xkb_layout" "fr"
[ 50.363] (**) Option "xkb_options" "compose:rwin"
[ 50.367] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: is tagged by udev as: Keyboard
[ 50.367] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: device is a keyboard
[ 50.368] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 50.368] (II) No input driver specified, ignoring this device.
[ 50.368] (II) This device may have been added with another device file.
[ 50.369] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 50.369] (II) No input driver specified, ignoring this device.
[ 50.369] (II) This device may have been added with another device file.
[ 50.370] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[ 50.370] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 50.370] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[ 50.370] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 50.370] (**) Asus WMI hotkeys: always reports core events
[ 50.370] (**) Option "Device" "/dev/input/event8"
[ 50.370] (**) Option "_source" "server/udev"
[ 50.372] (II) event8 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 50.372] (II) event8 - Asus WMI hotkeys: device is a keyboard
[ 50.372] (II) event8 - Asus WMI hotkeys: device removed
[ 50.380] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input25/event8"
[ 50.380] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[ 50.380] (**) Option "xkb_model" "pc105"
[ 50.380] (**) Option "xkb_layout" "fr"
[ 50.380] (**) Option "xkb_options" "compose:rwin"
[ 50.382] (II) event8 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 50.382] (II) event8 - Asus WMI hotkeys: device is a keyboard
[ 50.382] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 50.382] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 50.382] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 50.382] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 50.383] (**) AT Translated Set 2 keyboard: always reports core events
[ 50.383] (**) Option "Device" "/dev/input/event0"
[ 50.383] (**) Option "_source" "server/udev"
[ 50.384] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 50.384] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 50.386] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 50.391] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 50.391] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 50.391] (**) Option "xkb_model" "pc105"
[ 50.391] (**) Option "xkb_layout" "fr"
[ 50.391] (**) Option "xkb_options" "compose:rwin"
[ 50.393] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 50.393] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 50.395] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[ 50.395] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 50.395] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[ 50.395] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 50.395] (**) Option "Device" "/dev/input/event9"
[ 50.395] (**) Option "_source" "server/udev"
[ 50.397] (II) event9 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 50.586] (II) event9 - ETPS/2 Elantech Touchpad: device is a touchpad
[ 50.586] (II) event9 - ETPS/2 Elantech Touchpad: device removed
[ 50.612] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input24/event9"
[ 50.612] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)
[ 50.616] (**) Option "AccelerationScheme" "none"
[ 50.616] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[ 50.616] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 50.616] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 50.619] (II) event9 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 50.635] (II) event9 - ETPS/2 Elantech Touchpad: device is a touchpad
[ 50.636] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 50.636] (II) No input driver specified, ignoring this device.
[ 50.636] (II) This device may have been added with another device file.
[ 50.656] (**) Logitech M185: Applying InputClass "libinput pointer catchall"
[ 50.656] (**) Logitech M185: Applying InputClass "libinput keyboard catchall"
[ 50.656] (**) Logitech M185: Applying InputClass "system-keyboard"
[ 50.656] (II) Using input driver 'libinput' for 'Logitech M185'
[ 50.656] (**) Logitech M185: always reports core events
[ 50.656] (**) Option "Device" "/dev/input/event6"
[ 50.656] (**) Option "_source" "_driver/libinput"
[ 50.656] (II) libinput: Logitech M185: is a virtual subdevice
[ 50.656] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input19/event6"
[ 50.656] (II) XINPUT: Adding extended input device "Logitech M185" (type: KEYBOARD, id 16)
[ 50.656] (**) Option "xkb_model" "pc105"
[ 50.656] (**) Option "xkb_layout" "fr"
[ 50.656] (**) Option "xkb_options" "compose:rwin"
[ 50.657] (II) intel(0): EDID vendor "AUO", prod id 18156
[ 50.657] (II) intel(0): Printing DDC gathered Modelines:
[ 50.657] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1374 1384 1462 768 771 772 790 -hsync -vsync (47.4 kHz eP)
[ 15265.223] (II) event3 - Power Button: device removed
[ 15265.305] (II) event7 - Asus Wireless Radio Control: device removed
[ 15265.325] (II) event5 - Video Bus: device removed
[ 15265.337] (II) event4 - Video Bus: device removed
[ 15265.348] (II) event2 - Sleep Button: device removed
[ 15265.361] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: device removed
[ 15265.380] (II) event8 - Asus WMI hotkeys: device removed
[ 15265.393] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 15265.402] (II) event9 - ETPS/2 Elantech Touchpad: device removed
[ 15265.420] (II) event6 - Logitech M185: device removed
[ 15265.444] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 15272.965] (II) Open ACPI successful (/var/run/acpid.socket)
[ 15272.965] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 15272.965] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 15273.060] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 15273.060] (II) event3 - Power Button: device is a keyboard
[ 15273.064] (II) event7 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 15273.065] (II) event7 - Asus Wireless Radio Control: device is a keyboard
[ 15273.069] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 15273.069] (II) event5 - Video Bus: device is a keyboard
[ 15273.073] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 15273.073] (II) event4 - Video Bus: device is a keyboard
[ 15273.077] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 15273.077] (II) event2 - Sleep Button: device is a keyboard
[ 15273.083] (II) event6 - Logitech M185: is tagged by udev as: Keyboard Mouse
[ 15273.083] (II) event6 - Logitech M185: device set to 1000 DPI
[ 15273.083] (II) event6 - Logitech M185: device is a pointer
[ 15273.083] (II) event6 - Logitech M185: device is a keyboard
[ 15273.088] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: is tagged by udev as: Keyboard
[ 15273.089] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: device is a keyboard
[ 15273.092] (II) event8 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 15273.092] (II) event8 - Asus WMI hotkeys: device is a keyboard
[ 15273.095] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 15273.095] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 15273.101] (II) event9 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 15273.146] (II) event9 - ETPS/2 Elantech Touchpad: device is a touchpad
X.Org X Server 1.20.8
X Protocol Version 11, Revision 0
[ 47.457] Build Operating System: rabbit 5.5.9-server-1.mga7
[ 47.457] Current Operating System: Linux localhost.localdomain 5.6.14-desktop-2.mga7 #1 SMP Wed May 20 23:14:20 UTC 2020 x86_64
[ 47.457] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.6.14-desktop-2.mga7 root=UUID=a06c9a18-f387-46a0-80b5-f4edb790307b ro splash quiet noiswmd resume=UUID=329c5d5e-1deb-4f03-919a-277487cc3149 audit=0 vga=794
[ 47.457] Build Date: 29 April 2020 08:23:25AM
[ 47.457] Build ID: x11-server 1.20.8-1.mga7
[ 47.457] Current version of pixman: 0.38.4
[ 47.457] Before reporting problems, check https://bugs.mageia.org
to make sure that you have the latest version.
[ 47.457] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 47.458] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 16 19:03:04 2020
[ 47.496] (==) Using config file: "/etc/X11/xorg.conf"
[ 47.496] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 47.496] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 47.686] (==) ServerLayout "layout1"
[ 47.686] (**) |-->Screen "screen1" (0)
[ 47.686] (**) | |-->Monitor "monitor1"
[ 47.687] (**) | |-->Device "device1"
[ 47.688] (**) Option "DontZap" "False"
[ 47.688] (**) Option "AllowMouseOpenFail"
[ 47.688] (==) Automatically adding devices
[ 47.688] (==) Automatically enabling devices
[ 47.688] (==) Automatically adding GPU devices
[ 47.688] (==) Automatically binding GPU devices
[ 47.688] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 47.688] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 47.688] (**) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 47.688] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 47.688] (II) Loader magic: 0x617d40
[ 47.688] (II) Module ABI versions:
[ 47.688] X.Org ANSI C Emulation: 0.4
[ 47.688] X.Org Video Driver: 24.1
[ 47.688] X.Org XInput driver : 24.1
[ 47.688] X.Org Server Extension : 10.0
[ 47.690] (--) using VT number 2
[ 47.691] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 47.693] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 47.693] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 47.702] (--) PCI:*(0@0:2:0) 8086:0166:1043:1587 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 47.702] (--) PCI: (1@0:0:0) 10de:0fdf:1043:1587 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 47.702] (II) Open ACPI successful (/var/run/acpid.socket)
[ 47.702] (II) "glx" will be loaded by default.
[ 47.702] (II) LoadModule: "v4l"
[ 47.718] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[ 47.718] (II) Module v4l: vendor="X.Org Foundation"
[ 47.718] compiled for 1.20.1, module version = 0.1.1
[ 47.718] ABI class: X.Org Video Driver, version 24.0
[ 47.718] (II) LoadModule: "glx"
[ 47.719] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 47.722] (II) Module glx: vendor="X.Org Foundation"
[ 47.722] compiled for 1.20.8, module version = 1.0.0
[ 47.722] ABI class: X.Org Server Extension, version 10.0
[ 47.722] (II) LoadModule: "intel"
[ 47.722] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 47.760] (II) Module intel: vendor="X.Org Foundation"
[ 47.760] compiled for 1.20.7, module version = 2.99.917
[ 47.760] Module class: X.Org Video Driver
[ 47.760] ABI class: X.Org Video Driver, version 24.1
[ 47.760] (II) v4l driver for Video4Linux overlay mode (V4L2)
[ 47.760] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 47.761] (II) intel: Driver for Intel(R) HD Graphics
[ 47.761] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 47.761] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 47.761] (WW) xf86OpenConsole: setpgid failed: Operation not permitted
[ 47.761] (WW) xf86OpenConsole: setsid failed: Operation not permitted
[ 47.772] (WW) Falling back to old probe method for v4l
[ 47.772] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20200114
[ 47.785] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[ 47.785] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[ 47.785] (II) intel(0): Creating default Display subsection in Screen section
"screen1" for depth/fbbpp 24/32
[ 47.785] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 47.785] (==) intel(0): RGB weight 888
[ 47.785] (==) intel(0): Default visual is TrueColor
[ 47.786] (II) intel(0): Output LVDS1 using monitor section monitor1
[ 47.787] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 47.787] (II) intel(0): Enabled output LVDS1
[ 47.787] (II) intel(0): Output VGA1 has no monitor section
[ 47.787] (II) intel(0): Enabled output VGA1
[ 47.787] (II) intel(0): Output HDMI1 has no monitor section
[ 47.787] (II) intel(0): Enabled output HDMI1
[ 47.787] (II) intel(0): Output DP1 has no monitor section
[ 47.788] (II) intel(0): Enabled output DP1
[ 47.788] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 47.788] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 47.788] (II) intel(0): Enabled output VIRTUAL1
[ 47.788] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 47.788] (==) intel(0): TearFree disabled
[ 47.788] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 47.788] (==) intel(0): DPI set to (96, 96)
[ 47.788] (II) Loading sub module "dri3"
[ 47.788] (II) LoadModule: "dri3"
[ 47.788] (II) Module "dri3" already built-in
[ 47.788] (II) Loading sub module "dri2"
[ 47.788] (II) LoadModule: "dri2"
[ 47.788] (II) Module "dri2" already built-in
[ 47.788] (II) Loading sub module "present"
[ 47.788] (II) LoadModule: "present"
[ 47.788] (II) Module "present" already built-in
[ 47.820] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[ 47.820] (==) intel(0): Backing store enabled
[ 47.820] (==) intel(0): Silken mouse enabled
[ 47.820] (II) intel(0): HW Cursor enabled
[ 47.821] (**) intel(0): DPMS enabled
[ 47.821] (==) intel(0): Display hotplug detection enabled
[ 47.930] (EE) v4l: /dev/video0: no overlay support
[ 47.933] (EE) v4l: /dev/video1: no overlay support
[ 47.933] (II) intel(0): [DRI2] Setup complete
[ 47.933] (II) intel(0): [DRI2] DRI driver: i965
[ 47.933] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 47.933] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 47.933] (II) intel(0): hardware support for Present enabled
[ 47.933] (II) Initializing extension Generic Event Extension
[ 47.933] (II) Initializing extension SHAPE
[ 47.933] (II) Initializing extension MIT-SHM
[ 47.933] (II) Initializing extension XInputExtension
[ 47.934] (II) Initializing extension XTEST
[ 47.934] (II) Initializing extension BIG-REQUESTS
[ 47.934] (II) Initializing extension SYNC
[ 47.934] (II) Initializing extension XKEYBOARD
[ 48.059] (II) Initializing extension XC-MISC
[ 48.059] (II) Initializing extension XFIXES
[ 48.059] (II) Initializing extension RENDER
[ 48.059] (II) Initializing extension RANDR
[ 48.059] (II) Initializing extension COMPOSITE
[ 48.059] (II) Initializing extension DAMAGE
[ 48.059] (II) Initializing extension MIT-SCREEN-SAVER
[ 48.059] (II) Initializing extension DOUBLE-BUFFER
[ 48.059] (II) Initializing extension RECORD
[ 48.059] (II) Initializing extension DPMS
[ 48.059] (II) Initializing extension Present
[ 48.059] (II) Initializing extension DRI3
[ 48.059] (II) Initializing extension X-Resource
[ 48.059] (II) Initializing extension XVideo
[ 48.059] (II) Initializing extension XVideo-MotionCompensation
[ 48.059] (II) Initializing extension GLX
[ 48.572] (II) AIGLX: Loaded and initialized i965
[ 48.572] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 48.572] (II) Initializing extension XFree86-VidModeExtension
[ 48.572] (II) Initializing extension XFree86-DGA
[ 48.572] (II) Initializing extension XFree86-DRI
[ 48.572] (II) Initializing extension DRI2
[ 48.582] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 48.584] (II) intel(0): Setting screen physical size to 361 x 203
[ 50.061] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 50.061] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 50.061] (**) Power Button: Applying InputClass "system-keyboard"
[ 50.061] (II) LoadModule: "libinput"
[ 50.061] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 50.062] (II) Module libinput: vendor="X.Org Foundation"
[ 50.062] compiled for 1.20.3, module version = 0.28.2
[ 50.063] Module class: X.Org XInput Driver
[ 50.063] ABI class: X.Org XInput driver, version 24.1
[ 50.063] (II) Using input driver 'libinput' for 'Power Button'
[ 50.063] (**) Power Button: always reports core events
[ 50.063] (**) Option "Device" "/dev/input/event3"
[ 50.063] (**) Option "_source" "server/udev"
[ 50.160] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 50.160] (II) event3 - Power Button: device is a keyboard
[ 50.160] (II) event3 - Power Button: device removed
[ 50.165] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[ 50.165] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 50.165] (**) Option "xkb_model" "pc105"
[ 50.165] (**) Option "xkb_layout" "fr"
[ 50.165] (**) Option "xkb_options" "compose:rwin"
[ 50.254] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 50.254] (II) event3 - Power Button: device is a keyboard
[ 50.256] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event7)
[ 50.256] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 50.256] (**) Asus Wireless Radio Control: Applying InputClass "system-keyboard"
[ 50.256] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[ 50.256] (**) Asus Wireless Radio Control: always reports core events
[ 50.256] (**) Option "Device" "/dev/input/event7"
[ 50.256] (**) Option "_source" "server/udev"
[ 50.259] (II) event7 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 50.259] (II) event7 - Asus Wireless Radio Control: device is a keyboard
[ 50.259] (II) event7 - Asus Wireless Radio Control: device removed
[ 50.278] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input20/event7"
[ 50.278] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[ 50.278] (**) Option "xkb_model" "pc105"
[ 50.278] (**) Option "xkb_layout" "fr"
[ 50.278] (**) Option "xkb_options" "compose:rwin"
[ 50.280] (II) event7 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 50.280] (II) event7 - Asus Wireless Radio Control: device is a keyboard
[ 50.280] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 50.280] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 50.280] (**) Video Bus: Applying InputClass "system-keyboard"
[ 50.280] (II) Using input driver 'libinput' for 'Video Bus'
[ 50.281] (**) Video Bus: always reports core events
[ 50.281] (**) Option "Device" "/dev/input/event5"
[ 50.281] (**) Option "_source" "server/udev"
[ 50.282] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 50.282] (II) event5 - Video Bus: device is a keyboard
[ 50.282] (II) event5 - Video Bus: device removed
[ 50.290] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input9/event5"
[ 50.290] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 50.290] (**) Option "xkb_model" "pc105"
[ 50.290] (**) Option "xkb_layout" "fr"
[ 50.290] (**) Option "xkb_options" "compose:rwin"
[ 50.292] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 50.292] (II) event5 - Video Bus: device is a keyboard
[ 50.293] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 50.293] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 50.293] (**) Video Bus: Applying InputClass "system-keyboard"
[ 50.293] (II) Using input driver 'libinput' for 'Video Bus'
[ 50.293] (**) Video Bus: always reports core events
[ 50.293] (**) Option "Device" "/dev/input/event4"
[ 50.293] (**) Option "_source" "server/udev"
[ 50.295] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 50.295] (II) event4 - Video Bus: device is a keyboard
[ 50.296] (II) event4 - Video Bus: device removed
[ 50.308] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input8/event4"
[ 50.308] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 50.308] (**) Option "xkb_model" "pc105"
[ 50.308] (**) Option "xkb_layout" "fr"
[ 50.308] (**) Option "xkb_options" "compose:rwin"
[ 50.312] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 50.312] (II) event4 - Video Bus: device is a keyboard
[ 50.313] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 50.314] (II) No input driver specified, ignoring this device.
[ 50.314] (II) This device may have been added with another device file.
[ 50.315] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 50.315] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 50.315] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 50.315] (II) Using input driver 'libinput' for 'Sleep Button'
[ 50.315] (**) Sleep Button: always reports core events
[ 50.315] (**) Option "Device" "/dev/input/event2"
[ 50.315] (**) Option "_source" "server/udev"
[ 50.317] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 50.317] (II) event2 - Sleep Button: device is a keyboard
[ 50.317] (II) event2 - Sleep Button: device removed
[ 50.327] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[ 50.327] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 50.327] (**) Option "xkb_model" "pc105"
[ 50.327] (**) Option "xkb_layout" "fr"
[ 50.327] (**) Option "xkb_options" "compose:rwin"
[ 50.329] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 50.329] (II) event2 - Sleep Button: device is a keyboard
[ 50.332] (II) config/udev: Adding input device Logitech M185 (/dev/input/event6)
[ 50.332] (**) Logitech M185: Applying InputClass "libinput pointer catchall"
[ 50.332] (**) Logitech M185: Applying InputClass "libinput keyboard catchall"
[ 50.332] (**) Logitech M185: Applying InputClass "system-keyboard"
[ 50.332] (II) Using input driver 'libinput' for 'Logitech M185'
[ 50.332] (**) Logitech M185: always reports core events
[ 50.332] (**) Option "Device" "/dev/input/event6"
[ 50.332] (**) Option "_source" "server/udev"
[ 50.336] (II) event6 - Logitech M185: is tagged by udev as: Keyboard Mouse
[ 50.336] (II) event6 - Logitech M185: device set to 1000 DPI
[ 50.336] (II) event6 - Logitech M185: device is a pointer
[ 50.336] (II) event6 - Logitech M185: device is a keyboard
[ 50.336] (II) event6 - Logitech M185: device removed
[ 50.341] (II) libinput: Logitech M185: needs a virtual subdevice
[ 50.341] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input19/event6"
[ 50.341] (II) XINPUT: Adding extended input device "Logitech M185" (type: MOUSE, id 11)
[ 50.341] (**) Option "AccelerationScheme" "none"
[ 50.341] (**) Logitech M185: (accel) selected scheme none/0
[ 50.341] (**) Logitech M185: (accel) acceleration factor: 2.000
[ 50.341] (**) Logitech M185: (accel) acceleration threshold: 4
[ 50.345] (II) event6 - Logitech M185: is tagged by udev as: Keyboard Mouse
[ 50.345] (II) event6 - Logitech M185: device set to 1000 DPI
[ 50.345] (II) event6 - Logitech M185: device is a pointer
[ 50.345] (II) event6 - Logitech M185: device is a keyboard
[ 50.346] (II) config/udev: Adding input device Logitech M185 (/dev/input/mouse0)
[ 50.346] (**) Logitech M185: Applying InputClass "system-keyboard"
[ 50.347] (II) No input driver specified, ignoring this device.
[ 50.347] (II) This device may have been added with another device file.
[ 50.348] (II) config/udev: Adding input device USB Camera: USB 2.0 UVC HD Webc (/dev/input/event10)
[ 50.348] (**) USB Camera: USB 2.0 UVC HD Webc: Applying InputClass "libinput keyboard catchall"
[ 50.348] (**) USB Camera: USB 2.0 UVC HD Webc: Applying InputClass "system-keyboard"
[ 50.348] (II) Using input driver 'libinput' for 'USB Camera: USB 2.0 UVC HD Webc'
[ 50.348] (**) USB Camera: USB 2.0 UVC HD Webc: always reports core events
[ 50.348] (**) Option "Device" "/dev/input/event10"
[ 50.348] (**) Option "_source" "server/udev"
[ 50.350] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: is tagged by udev as: Keyboard
[ 50.350] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: device is a keyboard
[ 50.350] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: device removed
[ 50.363] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input26/event10"
[ 50.363] (II) XINPUT: Adding extended input device "USB Camera: USB 2.0 UVC HD Webc" (type: KEYBOARD, id 12)
[ 50.363] (**) Option "xkb_model" "pc105"
[ 50.363] (**) Option "xkb_layout" "fr"
[ 50.363] (**) Option "xkb_options" "compose:rwin"
[ 50.367] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: is tagged by udev as: Keyboard
[ 50.367] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: device is a keyboard
[ 50.368] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event11)
[ 50.368] (II) No input driver specified, ignoring this device.
[ 50.368] (II) This device may have been added with another device file.
[ 50.369] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[ 50.369] (II) No input driver specified, ignoring this device.
[ 50.369] (II) This device may have been added with another device file.
[ 50.370] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[ 50.370] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 50.370] (**) Asus WMI hotkeys: Applying InputClass "system-keyboard"
[ 50.370] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 50.370] (**) Asus WMI hotkeys: always reports core events
[ 50.370] (**) Option "Device" "/dev/input/event8"
[ 50.370] (**) Option "_source" "server/udev"
[ 50.372] (II) event8 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 50.372] (II) event8 - Asus WMI hotkeys: device is a keyboard
[ 50.372] (II) event8 - Asus WMI hotkeys: device removed
[ 50.380] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input25/event8"
[ 50.380] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[ 50.380] (**) Option "xkb_model" "pc105"
[ 50.380] (**) Option "xkb_layout" "fr"
[ 50.380] (**) Option "xkb_options" "compose:rwin"
[ 50.382] (II) event8 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 50.382] (II) event8 - Asus WMI hotkeys: device is a keyboard
[ 50.382] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 50.382] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 50.382] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 50.382] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 50.383] (**) AT Translated Set 2 keyboard: always reports core events
[ 50.383] (**) Option "Device" "/dev/input/event0"
[ 50.383] (**) Option "_source" "server/udev"
[ 50.384] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 50.384] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 50.386] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 50.391] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 50.391] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 50.391] (**) Option "xkb_model" "pc105"
[ 50.391] (**) Option "xkb_layout" "fr"
[ 50.391] (**) Option "xkb_options" "compose:rwin"
[ 50.393] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 50.393] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 50.395] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[ 50.395] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 50.395] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[ 50.395] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 50.395] (**) Option "Device" "/dev/input/event9"
[ 50.395] (**) Option "_source" "server/udev"
[ 50.397] (II) event9 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 50.586] (II) event9 - ETPS/2 Elantech Touchpad: device is a touchpad
[ 50.586] (II) event9 - ETPS/2 Elantech Touchpad: device removed
[ 50.612] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input24/event9"
[ 50.612] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)
[ 50.616] (**) Option "AccelerationScheme" "none"
[ 50.616] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[ 50.616] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 50.616] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 50.619] (II) event9 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 50.635] (II) event9 - ETPS/2 Elantech Touchpad: device is a touchpad
[ 50.636] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[ 50.636] (II) No input driver specified, ignoring this device.
[ 50.636] (II) This device may have been added with another device file.
[ 50.656] (**) Logitech M185: Applying InputClass "libinput pointer catchall"
[ 50.656] (**) Logitech M185: Applying InputClass "libinput keyboard catchall"
[ 50.656] (**) Logitech M185: Applying InputClass "system-keyboard"
[ 50.656] (II) Using input driver 'libinput' for 'Logitech M185'
[ 50.656] (**) Logitech M185: always reports core events
[ 50.656] (**) Option "Device" "/dev/input/event6"
[ 50.656] (**) Option "_source" "_driver/libinput"
[ 50.656] (II) libinput: Logitech M185: is a virtual subdevice
[ 50.656] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/0003:046D:C52F.0002/0003:046D:4008.0003/input/input19/event6"
[ 50.656] (II) XINPUT: Adding extended input device "Logitech M185" (type: KEYBOARD, id 16)
[ 50.656] (**) Option "xkb_model" "pc105"
[ 50.656] (**) Option "xkb_layout" "fr"
[ 50.656] (**) Option "xkb_options" "compose:rwin"
[ 50.657] (II) intel(0): EDID vendor "AUO", prod id 18156
[ 50.657] (II) intel(0): Printing DDC gathered Modelines:
[ 50.657] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1374 1384 1462 768 771 772 790 -hsync -vsync (47.4 kHz eP)
[ 15265.223] (II) event3 - Power Button: device removed
[ 15265.305] (II) event7 - Asus Wireless Radio Control: device removed
[ 15265.325] (II) event5 - Video Bus: device removed
[ 15265.337] (II) event4 - Video Bus: device removed
[ 15265.348] (II) event2 - Sleep Button: device removed
[ 15265.361] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: device removed
[ 15265.380] (II) event8 - Asus WMI hotkeys: device removed
[ 15265.393] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 15265.402] (II) event9 - ETPS/2 Elantech Touchpad: device removed
[ 15265.420] (II) event6 - Logitech M185: device removed
[ 15265.444] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 15272.965] (II) Open ACPI successful (/var/run/acpid.socket)
[ 15272.965] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 15272.965] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 15273.060] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 15273.060] (II) event3 - Power Button: device is a keyboard
[ 15273.064] (II) event7 - Asus Wireless Radio Control: is tagged by udev as: Keyboard
[ 15273.065] (II) event7 - Asus Wireless Radio Control: device is a keyboard
[ 15273.069] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 15273.069] (II) event5 - Video Bus: device is a keyboard
[ 15273.073] (II) event4 - Video Bus: is tagged by udev as: Keyboard
[ 15273.073] (II) event4 - Video Bus: device is a keyboard
[ 15273.077] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 15273.077] (II) event2 - Sleep Button: device is a keyboard
[ 15273.083] (II) event6 - Logitech M185: is tagged by udev as: Keyboard Mouse
[ 15273.083] (II) event6 - Logitech M185: device set to 1000 DPI
[ 15273.083] (II) event6 - Logitech M185: device is a pointer
[ 15273.083] (II) event6 - Logitech M185: device is a keyboard
[ 15273.088] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: is tagged by udev as: Keyboard
[ 15273.089] (II) event10 - USB Camera: USB 2.0 UVC HD Webc: device is a keyboard
[ 15273.092] (II) event8 - Asus WMI hotkeys: is tagged by udev as: Keyboard
[ 15273.092] (II) event8 - Asus WMI hotkeys: device is a keyboard
[ 15273.095] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 15273.095] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 15273.101] (II) event9 - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[ 15273.146] (II) event9 - ETPS/2 Elantech Touchpad: device is a touchpad
Dans le CCM, "configurer le serveur d'affichage", j'ai "Intel 810 and later" - peut-être devrais-je basculer surNvidia Geforce 635serie and later... ?
Mais j'ai peur de perdre mon affichage et de ne pas savoir revenir en arrière... Qu'en pensez-vous ?
Merci.
Édité par Petronov Le 17/07/2020 à 02h23
nic80 Membre non connecté
-
- Voir le profil du membre nic80
- Inscrit le : 06/08/2018
- Groupes :
-
Modérateur
Il ne semble pas y avoir d' erreurs dans le xorg.log.
Pour l' affichage, s' il y a des cartes différentes dont une Intel, il est préférable de rester dessus pour le moment. Concernant les pilotes propriétaires, le 390.132 et le 340 supportent la carte, donc en principe cela devrait fonctionner.
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
Il s'agit donc de la technologie Optimus, avec une carte Intel et une carte Nvidia. Il FAUT rester sur Intel en configuration par défaut. Si tes amis n'ont pas prévu l'utilisation d'application gourmande côté graphique, ce n'est pas la peine de se compliquer plus la vie. Sinon, il faudra utiliser blumblebee pour ces applications.
Tu peux nous fournir la sortie de (en root) :
Code BASH :
journalctl -b --no-pager -p err >journal.txt
pour identifier les messages de services en erreur au démarrage.
Petronov Membre non connecté
-
- Voir le profil du membre Petronov
- Inscrit le : 17/04/2009
- Groupes :
-
Membre d'Honneur
Donc je ne touche pas au pilote graphique...
Voici le résultat de la journalisation :
Caché :
-- Logs begin at Thu 2020-07-16 17:26:02 CEST, end at Fri 2020-07-17 10:49:19 CEST. --
juil. 17 10:15:47 localhost.localdomain kernel: ACPI Error: Needed type [Reference], found [Integer] (____ptrval____) (20200110/exresop-69)
juil. 17 10:15:47 localhost.localdomain kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20200110/dswexec-434)
juil. 17 10:15:47 localhost.localdomain kernel: ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20200110/psparse-531)
juil. 17 10:15:47 localhost.localdomain kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000003) is beyond end of object (length 0x0) (20200110/exoparg2-396)
juil. 17 10:15:47 localhost.localdomain kernel: ACPI Error: Aborting method \_SB.PCI0.GFX0._DSM due to previous error (AE_AML_PACKAGE_LIMIT) (20200110/psparse-531)
juil. 17 10:15:47 localhost.localdomain kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000003) is beyond end of object (length 0x0) (20200110/exoparg2-396)
juil. 17 10:15:47 localhost.localdomain kernel: ACPI Error: Aborting method \_SB.PCI0.GFX0._DSM due to previous error (AE_AML_PACKAGE_LIMIT) (20200110/psparse-531)
juil. 17 10:15:47 localhost.localdomain kernel: ACPI Error: Aborting method \_SB.PCI0.PEG0.PEGP._DSM due to previous error (AE_AML_PACKAGE_LIMIT) (20200110/psparse-531)
juil. 17 10:15:47 localhost.localdomain kernel: nouveau 0000:01:00.0: bus: MMIO write of 0000001f FAULT at 6013d4 [ IBUS ]
juil. 17 10:15:57 localhost.localdomain kernel: nouveau 0000:01:00.0: bus: MMIO write of 8000001f FAULT at 6013d4 [ IBUS ]
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D0: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D1: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D2: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D3: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D4: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D5: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D6: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D7: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: snd_hda_intel 0000:01:00.1: no codecs initialized
juil. 17 10:15:47 localhost.localdomain kernel: ACPI Error: Needed type [Reference], found [Integer] (____ptrval____) (20200110/exresop-69)
juil. 17 10:15:47 localhost.localdomain kernel: ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20200110/dswexec-434)
juil. 17 10:15:47 localhost.localdomain kernel: ACPI Error: Aborting method \_PR.CPU0._PDC due to previous error (AE_AML_OPERAND_TYPE) (20200110/psparse-531)
juil. 17 10:15:47 localhost.localdomain kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000003) is beyond end of object (length 0x0) (20200110/exoparg2-396)
juil. 17 10:15:47 localhost.localdomain kernel: ACPI Error: Aborting method \_SB.PCI0.GFX0._DSM due to previous error (AE_AML_PACKAGE_LIMIT) (20200110/psparse-531)
juil. 17 10:15:47 localhost.localdomain kernel: ACPI BIOS Error (bug): AE_AML_PACKAGE_LIMIT, Index (0x000000003) is beyond end of object (length 0x0) (20200110/exoparg2-396)
juil. 17 10:15:47 localhost.localdomain kernel: ACPI Error: Aborting method \_SB.PCI0.GFX0._DSM due to previous error (AE_AML_PACKAGE_LIMIT) (20200110/psparse-531)
juil. 17 10:15:47 localhost.localdomain kernel: ACPI Error: Aborting method \_SB.PCI0.PEG0.PEGP._DSM due to previous error (AE_AML_PACKAGE_LIMIT) (20200110/psparse-531)
juil. 17 10:15:47 localhost.localdomain kernel: nouveau 0000:01:00.0: bus: MMIO write of 0000001f FAULT at 6013d4 [ IBUS ]
juil. 17 10:15:57 localhost.localdomain kernel: nouveau 0000:01:00.0: bus: MMIO write of 8000001f FAULT at 6013d4 [ IBUS ]
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D0: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D1: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D2: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D3: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D4: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D5: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D6: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: hdaudio hdaudioC1D7: no AFG or MFG node found
juil. 17 10:16:01 localhost.localdomain kernel: snd_hda_intel 0000:01:00.1: no codecs initialized
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
Journal :
nouveau 0000:01:00.0: bus: MMIO write of 0000001f FAULT at 6013d4 [ IBUS ]
juil. 17 10:15:57 localhost.localdomain kernel: nouveau 0000:01:00.0: bus: MMIO write of 8000001f FAULT at 6013d4 [ IBUS ]
juil. 17 10:15:57 localhost.localdomain kernel: nouveau 0000:01:00.0: bus: MMIO write of 8000001f FAULT at 6013d4 [ IBUS ]
Il est étonnant que tu aies des erreurs avec le pilote nouveau si tu utilises le pilote Intel. En tout état de cause, tu ne peux pas corriger son fonctionnement.Seule option, faire en sorte qu'il n'y soit pas fait appel. Peut être en désinstallant tout ce qui concerne nouveau.
Petronov Membre non connecté
-
- Voir le profil du membre Petronov
- Inscrit le : 17/04/2009
- Groupes :
-
Membre d'Honneur
Est-ce qu'on passer une commande au GRUB pour qu'il n'affiche rien du tout au démarrage, puisque ça marche ?
Merci...
nic80 Membre non connecté
-
- Voir le profil du membre nic80
- Inscrit le : 06/08/2018
- Groupes :
-
Modérateur
Citation :
Il est étonnant que tu aies des erreurs avec le pilote nouveau si tu utilises le pilote Intel
Physiquement la carte Nvidia est présente, donc il faut bien quelle soit gérée même si non utilisée ?
Si le module est blacklisté, il n' a plus de raison d' être chargé (donc plus de message le concernant).
En revanche je ne sais pas s' il est possible de blacklister un module directement depuis grub. Et si le module est blacklisté depuis le fichier /etc/modprobe.d/blacklist.conf (ou quelque chose comme ça), cela veut dire plus de carte Nvidia du tout.
Petronov Membre non connecté
-
- Voir le profil du membre Petronov
- Inscrit le : 17/04/2009
- Groupes :
-
Membre d'Honneur
Je n'ai plus accès à l'ordinateur. Il va donc rester ainsi.
J'ai lu le post sur Optimus dans le wiki. On verra à installer Bumblebee une autre fois.
Merci de votre aide. Je met en "résolu", même si ce n'est pas complètement résolu...
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie