Arduino/Genuino 101 (Curie) [Réglé]
problème de programmation du microcontrôleur
Système et matériels / Autres matériels et périphériques
yomdr Membre non connecté
-
- Voir le profil du membre yomdr
- Inscrit le : 23/12/2019
bonjour
j'ai installé Arduino sur leur site version 64 bits
arduino-1.8.10
j'ai ouvert le fichier exécutable dans l'archive
ensuite j'ai lancé le logiciel arduino
j'ai installé les périfériques de la carte comme le logiciel me l'a proposé
ensuite j'ai comme ci-dessus je suis allé dans groupe et j'ai cocher dialout
et Arduino me met ce message d'erreur
Arduino : 1.8.10 (Linux), Carte : "Arduino/Genuino Uno"
Le croquis utilise 924 octets (2%) de l'espace de stockage de programmes. Le maximum est de 32256 octets.
Les variables globales utilisent 9 octets (0%) de mémoire dynamique, ce qui laisse 2039 octets pour les variables locales. Le maximum est de 2048 octets.
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x2d
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x31
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x33
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x38
avrdude: stk500_getsync() attempt 5 of 10: not in sync: resp=0x0d
avrdude: stk500_getsync() attempt 6 of 10: not in sync: resp=0x0a
avrdude: stk500_getsync() attempt 7 of 10: not in sync: resp=0x2d
avrdude: stk500_getsync() attempt 8 of 10: not in sync: resp=0x31
avrdude: stk500_getsync() attempt 9 of 10: not in sync: resp=0x34
avrdude: stk500_getsync() attempt 10 of 10: not in sync: resp=0x32
Une erreur est survenue lors du transfert du croquis
Ce rapport pourrait être plus détaillé avec
l'option "Afficher les résultats détaillés de la compilation"
activée dans Fichier -> Préférences.
ensuite je ne sais plus quoi faire
Édité par yomdr Le 23/12/2019 à 12h31
intel core i5 2320 ; géforce gtx750 ti
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
Yves
yomdr Membre non connecté
-
- Voir le profil du membre yomdr
- Inscrit le : 23/12/2019
intel core i5 2320 ; géforce gtx750 ti
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
Yves
yomdr Membre non connecté
-
- Voir le profil du membre yomdr
- Inscrit le : 23/12/2019
Édité par yomdr Le 24/12/2019 à 10h34
intel core i5 2320 ; géforce gtx750 ti
yomdr Membre non connecté
-
- Voir le profil du membre yomdr
- Inscrit le : 23/12/2019
Caché :
[y@localhost ~]$ ls -l /dev/ttyACM0
crw-rw---- 1 root dialout 166, 0 déc. 24 10:31 /dev/ttyACM0
[y@localhost ~]$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17
[ 0.000000] Linux version 5.4.2-desktop-1.mga7 (iurt@scwx861.mageia.org) (gcc version 8.3.1 20191101 (Mageia 8.3.1-0.20191101.1.mga7)) #1 SMP Thu Dec 5 17:40:00 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.2-desktop-1.mga7 root=UUID=38f47d5c-131c-4985-b78c-ac4d0fc49493 ro nokmsboot splash quiet noiswmd resume=UUID=7a37d9ea-d7ff-47ae-aa1c-83943c396440 audit=0 vga=791
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf3ddfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf3de000-0x00000000bf425fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf426000-0x00000000bf42dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf42e000-0x00000000bf4befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf4bf000-0x00000000bf4bffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf4c0000-0x00000000bf4c4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf4c5000-0x00000000bf4c5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf4c6000-0x00000000bf4d5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf4d6000-0x00000000bf4e0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf4e1000-0x00000000bf535fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf536000-0x00000000bf578fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf579000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bf7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Packard Bell imedia S3840/imedia S3840, BIOS P01-B1 07/08/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x1bf800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 2 base 1BF800000 mask FFF800000 uncachable
[ 0.000000] 3 base 1C0000000 mask FC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcf90-0x000fcf9f]
[ 0.000000] BRK [0x63a01000, 0x63a01fff] PGTABLE
[ 0.000000] BRK [0x63a02000, 0x63a02fff] PGTABLE
[ 0.000000] BRK [0x63a03000, 0x63a03fff] PGTABLE
[ 0.000000] BRK [0x63a04000, 0x63a04fff] PGTABLE
[ 0.000000] BRK [0x63a05000, 0x63a05fff] PGTABLE
[ 0.000000] BRK [0x63a06000, 0x63a06fff] PGTABLE
[ 0.000000] BRK [0x63a07000, 0x63a07fff] PGTABLE
[ 0.000000] BRK [0x63a08000, 0x63a08fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35101000-0x36878fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x00000000BF426068 000054 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BF42D270 0000F4 (v04 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BF426150 00711A (v02 ACRSYS ACRPRDCT 00000012 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BF4D8F80 000040
[ 0.000000] ACPI: APIC 0x00000000BF42D368 000072 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BF42D3E0 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 0x00000000BF42D4E8 00003C (v01 ACRSYS ACRPRDCT 01072009 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000BF42D528 000176 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 0x00000000BF42D6A0 000038 (v01 ACRSYS ACRPRDCT 01072009 AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bf7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1bf7f9000-0x1bf7fcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001bf7fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf3ddfff]
[ 0.000000] node 0: [mem 0x00000000bf4c5000-0x00000000bf4c5fff]
[ 0.000000] node 0: [mem 0x00000000bf579000-0x00000000bf7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001bf7fffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 2558 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bf7fffff]
[ 0.000000] On node 0 totalpages: 1568258
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12186 pages used for memmap
[ 0.000000] DMA32 zone: 779878 pages, LIFO batch:63
[ 0.000000] Normal zone: 12256 pages used for memmap
[ 0.000000] Normal zone: 784384 pages, LIFO batch:63
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf3de000-0xbf425fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf426000-0xbf42dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf42e000-0xbf4befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4bf000-0xbf4bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4c0000-0xbf4c4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4c6000-0xbf4d5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4d6000-0xbf4e0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4e1000-0xbf535fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf536000-0xbf578fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xbf800000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 53 pages/cpu s177816 r8192 d31080 u524288
[ 0.000000] pcpu-alloc: s177816 r8192 d31080 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1543731
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.2-desktop-1.mga7 root=UUID=38f47d5c-131c-4985-b78c-ac4d0fc49493 ro nokmsboot splash quiet noiswmd resume=UUID=7a37d9ea-d7ff-47ae-aa1c-83943c396440 audit=0 vga=791
[ 0.000000] audit: disabled (until reboot)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6044800K/6273032K available (12291K kernel code, 1391K rwdata, 3952K rodata, 1688K init, 1300K bss, 228232K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x7c/0x140 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 37726 entries in 148 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 8448, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] printk: console [tty0] enabled
[ 0.000000] ACPI: Core revision 20190816
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.006000] tsc: PIT calibration matches HPET. 1 loops
[ 0.006000] tsc: Detected 2993.814 MHz processor
[ 0.000002] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b2771accf3, max_idle_ns: 440795315188 ns
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5987.62 BogoMIPS (lpj=2993814)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000028] LSM: Security Framework initializing
[ 0.000048] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.000061] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.000245] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.000256] process: using mwait in idle threads
[ 0.000258] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.000259] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.000261] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.000262] Spectre V2 : Mitigation: Full generic retpoline
[ 0.000263] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.000263] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.000264] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.000266] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.000268] MDS: Mitigation: Clear CPU buffers
[ 0.000393] Freeing SMP alternatives memory: 36K
[ 0.001473] TSC deadline timer enabled
[ 0.001477] smpboot: CPU0: Intel(R) Core(TM) i5-2320 CPU @ 3.00GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.001547] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.001552] ... version: 3
[ 0.001553] ... bit width: 48
[ 0.001553] ... generic registers: 8
[ 0.001554] ... value mask: 0000ffffffffffff
[ 0.001554] ... max period: 00007fffffffffff
[ 0.001555] ... fixed-purpose events: 3
[ 0.001555] ... event mask: 00000007000000ff
[ 0.001582] rcu: Hierarchical SRCU implementation.
[ 0.001957] smp: Bringing up secondary CPUs ...
[ 0.002004] x86: Booting SMP configuration:
[ 0.002004] .... node #0, CPUs: #1
[ 0.003004] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.003004] Measured 5150605350 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.003004] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.003098] #2 #3
[ 0.005023] smp: Brought up 1 node, 4 CPUs
[ 0.005024] smpboot: Max logical packages: 1
[ 0.005025] smpboot: Total of 4 processors activated (23950.51 BogoMIPS)
[ 0.006210] devtmpfs: initialized
[ 0.006210] x86/mm: Memory block size: 128MB
[ 0.006483] PM: Registering ACPI NVS region [mem 0xbf3de000-0xbf425fff] (294912 bytes)
[ 0.006483] PM: Registering ACPI NVS region [mem 0xbf4bf000-0xbf4bffff] (4096 bytes)
[ 0.006483] PM: Registering ACPI NVS region [mem 0xbf4d6000-0xbf4e0fff] (45056 bytes)
[ 0.006483] PM: Registering ACPI NVS region [mem 0xbf536000-0xbf578fff] (274432 bytes)
[ 0.006483] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.006483] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.006483] xor: automatically using best checksumming function avx
[ 0.006483] pinctrl core: initialized pinctrl subsystem
[ 0.007057] PM: RTC time: 10:07:15, date: 2019-12-24
[ 0.007154] NET: Registered protocol family 16
[ 0.007310] cpuidle: using governor ladder
[ 0.007310] cpuidle: using governor menu
[ 0.007310] ACPI: bus type PCI registered
[ 0.007310] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.007310] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.007310] PCI: not using MMCONFIG
[ 0.007310] PCI: Using configuration type 1 for base access
[ 0.007310] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.007330] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.008403] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.026006] raid6: sse2x4 gen() 12804 MB/s
[ 0.043008] raid6: sse2x4 xor() 8613 MB/s
[ 0.060008] raid6: sse2x2 gen() 10835 MB/s
[ 0.077005] raid6: sse2x2 xor() 7386 MB/s
[ 0.094011] raid6: sse2x1 gen() 9250 MB/s
[ 0.111009] raid6: sse2x1 xor() 6554 MB/s
[ 0.111010] raid6: using algorithm sse2x4 gen() 12804 MB/s
[ 0.111011] raid6: .... xor() 8613 MB/s, rmw enabled
[ 0.111012] raid6: using ssse3x2 recovery algorithm
[ 0.111065] ACPI: Added _OSI(Module Device)
[ 0.111066] ACPI: Added _OSI(Processor Device)
[ 0.111066] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.111067] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.111068] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.111068] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.111069] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.113723] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.114430] ACPI: Dynamic OEM Table Load:
[ 0.114434] ACPI: SSDT 0xFFFF91CBB7AA3C00 00038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.114732] ACPI: Dynamic OEM Table Load:
[ 0.114734] ACPI: SSDT 0xFFFF91CBB785B600 000084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.115321] ACPI: Interpreter enabled
[ 0.115333] ACPI: (supports S0 S3 S4 S5)
[ 0.115334] ACPI: Using IOAPIC for interrupt routing
[ 0.115358] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.115406] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.115409] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[ 0.115704] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.115823] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.115984] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.119384] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.119388] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.119484] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[ 0.119570] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.119795] PCI host bridge to bus 0000:00
[ 0.119797] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.119798] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.119799] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.119800] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.119801] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.119802] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.119803] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.119804] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.119811] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.119882] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.119916] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.120019] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.120049] pci 0000:00:16.0: reg 0x10: [mem 0xfb129000-0xfb12900f 64bit]
[ 0.120127] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.120202] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.120224] pci 0000:00:19.0: reg 0x10: [mem 0xfb100000-0xfb11ffff]
[ 0.120233] pci 0000:00:19.0: reg 0x14: [mem 0xfb128000-0xfb128fff]
[ 0.120243] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.120303] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.120382] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.120406] pci 0000:00:1a.0: reg 0x10: [mem 0xfb127000-0xfb1273ff]
[ 0.120492] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.120571] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.120595] pci 0000:00:1b.0: reg 0x10: [mem 0xfb120000-0xfb123fff 64bit]
[ 0.120669] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.120747] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.120964] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.121087] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.121111] pci 0000:00:1d.0: reg 0x10: [mem 0xfb126000-0xfb1263ff]
[ 0.121196] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.121282] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.121508] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.121528] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.121536] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.121545] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.121553] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.121560] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.121569] pci 0000:00:1f.2: reg 0x24: [mem 0xfb125000-0xfb1257ff]
[ 0.121613] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.121687] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.121708] pci 0000:00:1f.3: reg 0x10: [mem 0xfb124000-0xfb1240ff 64bit]
[ 0.121729] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.121836] pci 0000:01:00.0: [10de:1380] type 00 class 0x030000
[ 0.121854] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.121863] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.121872] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.121878] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.121884] pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
[ 0.121889] pci 0000:01:00.0: enabling Extended Tags
[ 0.121951] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[ 0.121981] pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
[ 0.121995] pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
[ 0.122031] pci 0000:01:00.1: enabling Extended Tags
[ 0.122108] pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring
[ 0.125027] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.125030] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.125033] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
[ 0.125037] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.125141] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.125427] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.125476] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.125523] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.125568] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.125616] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.125661] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.125706] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.125752] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.125870] iommu: Default domain type: Translated
[ 0.125879] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.125879] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.125879] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.125879] vgaarb: loaded
[ 0.126024] SCSI subsystem initialized
[ 0.126032] libata version 3.00 loaded.
[ 0.126042] EDAC MC: Ver: 3.0.0
[ 0.126069] PCI: Using ACPI for IRQ routing
[ 0.131351] PCI: pci_cache_line_size set to 64 bytes
[ 0.131400] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.131401] e820: reserve RAM buffer [mem 0xbf3de000-0xbfffffff]
[ 0.131402] e820: reserve RAM buffer [mem 0xbf4c6000-0xbfffffff]
[ 0.131403] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.131404] e820: reserve RAM buffer [mem 0x1bf800000-0x1bfffffff]
[ 0.131492] NetLabel: Initializing
[ 0.131493] NetLabel: domain hash size = 128
[ 0.131493] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.131506] NetLabel: unlabeled traffic allowed by default
[ 0.132065] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.132068] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.134021] clocksource: Switched to clocksource hpet
[ 0.146462] VFS: Disk quotas dquot_6.6.0
[ 0.146474] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.146526] pnp: PnP ACPI init
[ 0.146644] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.146645] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.146646] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.146647] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.146649] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.146653] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.146749] system 00:01: [io 0x0a00-0x0a1f] has been reserved
[ 0.146751] system 00:01: [io 0x0a30-0x0a3f] has been reserved
[ 0.146752] system 00:01: [io 0x0a20-0x0a2f] has been reserved
[ 0.146755] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146795] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.146830] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.146833] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146949] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.146951] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.146952] system 00:04: [io 0x1180-0x119f] has been reserved
[ 0.146953] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.146954] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.146956] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.146957] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.146958] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.146961] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.147002] system 00:05: [io 0x0454-0x0457] has been reserved
[ 0.147020] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.147195] pnp: PnP ACPI: found 6 devices
[ 0.149168] thermal_sys: Registered thermal governor 'fair_share'
[ 0.149168] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.149169] thermal_sys: Registered thermal governor 'step_wise'
[ 0.149170] thermal_sys: Registered thermal governor 'user_space'
[ 0.149170] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.153724] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.153753] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.153755] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.153758] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
[ 0.153759] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.153762] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.153788] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.153789] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.153790] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.153791] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.153792] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.153793] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.153794] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.153795] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.153796] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
[ 0.153797] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.153855] NET: Registered protocol family 2
[ 0.153967] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.153980] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.154072] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.154182] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.154203] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.154221] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.154280] NET: Registered protocol family 1
[ 0.154285] NET: Registered protocol family 44
[ 0.273133] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x644 took 116035 usecs
[ 0.391126] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x644 took 115204 usecs
[ 0.391164] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.391183] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.391190] PCI: CLS 64 bytes, default 64
[ 0.391253] Trying to unpack rootfs image as initramfs...
[ 0.550551] Freeing initrd memory: 24032K
[ 0.550582] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.550583] software IO TLB: mapped [mem 0xbb3de000-0xbf3de000] (64MB)
[ 0.552162] Initialise system trusted keyrings
[ 0.552199] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.553531] zbud: loaded
[ 0.558401] Key type asymmetric registered
[ 0.558402] Asymmetric key parser 'x509' registered
[ 0.558410] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.558448] io scheduler mq-deadline registered
[ 0.558449] io scheduler kyber registered
[ 0.558479] io scheduler bfq registered
[ 0.558756] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
[ 0.558947] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[ 0.559088] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 0.559088] vesafb: scrolling: redraw
[ 0.559090] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.559102] vesafb: framebuffer at 0xd1000000, mapped to 0x(____ptrval____), using 3072k, total 14336k
[ 0.559181] Console: switching to colour frame buffer device 128x48
[ 0.576924] fb0: VESA VGA frame buffer device
[ 0.576935] intel_idle: MWAIT substates: 0x1120
[ 0.576936] intel_idle: v0.4.1 model 0x2A
[ 0.577081] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.577476] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.577834] Linux agpgart interface v0.103
[ 0.579489] brd: module loaded
[ 0.579800] ahci 0000:00:1f.2: version 3.0
[ 0.579943] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.579946] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 0.582417] scsi host0: ahci
[ 0.582640] scsi host1: ahci
[ 0.582806] scsi host2: ahci
[ 0.582919] scsi host3: ahci
[ 0.582964] ata1: SATA max UDMA/133 abar m2048@0xfb125000 port 0xfb125100 irq 26
[ 0.582967] ata2: SATA max UDMA/133 abar m2048@0xfb125000 port 0xfb125180 irq 26
[ 0.582967] ata3: DUMMY
[ 0.582968] ata4: DUMMY
[ 0.583022] i8042: PNP: No PS/2 controller found.
[ 0.583078] mousedev: PS/2 mouse device common for all mice
[ 0.583110] rtc_cmos 00:02: RTC can wake from S4
[ 0.583415] rtc_cmos 00:02: registered as rtc0
[ 0.583426] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.583434] intel_pstate: Intel P-state driver initializing
[ 0.583606] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.583789] Key type dns_resolver registered
[ 0.583790] mpls_gso: MPLS GSO support
[ 0.584138] microcode: sig=0x206a7, pf=0x2, revision=0x2f
[ 0.584263] microcode: Microcode Update Driver: v2.2.
[ 0.584267] IPI shorthand broadcast: enabled
[ 0.584352] registered taskstats version 1
[ 0.584353] Loading compiled-in X.509 certificates
[ 0.584401] zswap: loaded using pool lzo/zbud
[ 0.584578] Key type ._fscrypt registered
[ 0.584579] Key type .fscrypt registered
[ 0.585144] Btrfs loaded, crc32c=crc32c-generic
[ 0.590819] Key type encrypted registered
[ 0.591262] PM: Magic number: 15:963:123
[ 0.591292] acpi LNXSYBUS:01: hash matches
[ 0.591446] rtc_cmos 00:02: setting system clock to 2019-12-24T10:07:16 UTC (1577182036)
[ 0.591539] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[ 0.895524] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.895550] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.899155] ata1.00: ATA-8: WDC WD20EARS-22MVWB0, 51.0AB51, max UDMA/133
[ 0.899158] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.899636] ata2.00: ATA-9: SanDisk SDSSDA240G, Z33130RL, max UDMA/133
[ 0.899639] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.902910] ata1.00: configured for UDMA/133
[ 0.903275] scsi 0:0:0:0: Direct-Access ATA WDC WD20EARS-22M AB51 PQ: 0 ANSI: 5
[ 0.904083] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 0.904086] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.904127] sd 0:0:0:0: [sda] Write Protect is off
[ 0.904130] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.904254] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.909282] ata2.00: configured for UDMA/133
[ 0.909597] scsi 1:0:0:0: Direct-Access ATA SanDisk SDSSDA24 30RL PQ: 0 ANSI: 5
[ 0.910570] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 0.910620] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.910623] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.910711] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.912407] sdb: sdb1 sdb2 sdb3 sdb4
[ 0.913669] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 0.918241] sda: sda1 sda2 sda3 sda4
[ 0.919555] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.919603] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 0.921748] Freeing unused kernel image memory: 1688K
[ 0.925042] Write protecting the kernel read-only data: 18432k
[ 0.925818] Freeing unused kernel image memory: 2020K
[ 0.926042] Freeing unused kernel image memory: 144K
[ 0.935685] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.935686] x86/mm: Checking user space page tables
[ 0.942725] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.942726] Run /init as init process
[ 1.009518] dracut: dracut-046
[ 1.239435] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.239485] ACPI: Power Button [PWRB]
[ 1.239523] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.239551] ACPI: Power Button [PWRF]
[ 1.344081] IPMI message handler: version 39.2
[ 2.007394] nvidia: loading out-of-tree module taints kernel.
[ 2.007402] nvidia: module license 'NVIDIA' taints kernel.
[ 2.007403] Disabling lock debugging due to kernel taint
[ 2.019089] nvidia-nvlink: Nvlink Core is being initialized, major device number 247
[ 2.019462] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.219131] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 430.64 Sun Oct 27 11:26:12 UTC 2019
[ 2.256039] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 430.64 Sun Oct 27 11:08:21 UTC 2019
[ 2.258813] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 2.258814] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 2.934093] dracut: Starting plymouth daemon
[ 3.078081] ACPI: bus type USB registered
[ 3.078099] usbcore: registered new interface driver usbfs
[ 3.078106] usbcore: registered new interface driver hub
[ 3.078127] usbcore: registered new device driver usb
[ 3.082512] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.083040] ehci-pci: EHCI PCI platform driver
[ 3.083152] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.083159] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.083173] ehci-pci 0000:00:1a.0: debug port 2
[ 3.087083] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.087105] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb127000
[ 3.094047] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.094094] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 3.094096] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.094097] usb usb1: Product: EHCI Host Controller
[ 3.094098] usb usb1: Manufacturer: Linux 5.4.2-desktop-1.mga7 ehci_hcd
[ 3.094099] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.094204] hub 1-0:1.0: USB hub found
[ 3.094209] hub 1-0:1.0: 2 ports detected
[ 3.094451] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.094455] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.094466] ehci-pci 0000:00:1d.0: debug port 2
[ 3.098368] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.098386] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb126000
[ 3.105119] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.105156] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 3.105157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.105158] usb usb2: Product: EHCI Host Controller
[ 3.105159] usb usb2: Manufacturer: Linux 5.4.2-desktop-1.mga7 ehci_hcd
[ 3.105160] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.105261] hub 2-0:1.0: USB hub found
[ 3.105266] hub 2-0:1.0: 2 ports detected
[ 3.143540] PM: Image not found (code -22)
[ 3.160174] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.187099] dracut: Checking ext4: /dev/disk/by-uuid/38f47d5c-131c-4985-b78c-ac4d0fc49493
[ 3.187227] dracut: issuing e2fsck -a /dev/disk/by-uuid/38f47d5c-131c-4985-b78c-ac4d0fc49493
[ 3.193415] dracut: /dev/disk/by-uuid/38f47d5c-131c-4985-b78c-ac4d0fc49493: clean, 207143/2580480 files, 1893172/10314752 blocks
[ 3.195095] dracut: Mounting /dev/disk/by-uuid/38f47d5c-131c-4985-b78c-ac4d0fc49493 with -o rw,relatime,ro
[ 3.196727] random: fast init done
[ 3.198320] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.223300] dracut: Mounted root filesystem /dev/sdb1
[ 3.419044] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.427033] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 3.547438] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 3.547440] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.547703] hub 1-1:1.0: USB hub found
[ 3.547773] hub 1-1:1.0: 4 ports detected
[ 3.555430] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 3.555431] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.555669] hub 2-1:1.0: USB hub found
[ 3.555771] hub 2-1:1.0: 6 ports detected
[ 3.801628] dracut: Switching root
[ 3.818045] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[ 3.825041] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[ 3.895040] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 3.898452] usb 1-1.2: New USB device found, idVendor=8087, idProduct=0ab6, bcdDevice=80.87
[ 3.898454] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.898456] usb 1-1.2: Product: GENUINO 101
[ 3.898458] usb 1-1.2: Manufacturer: Intel
[ 3.898460] usb 1-1.2: SerialNumber: AE6771SQ55200B5
[ 3.906464] usb 2-1.3: New USB device found, idVendor=b58e, idProduct=0005, bcdDevice= 4.05
[ 3.906467] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.906469] usb 2-1.3: Product: Yeti Nano
[ 3.906471] usb 2-1.3: Manufacturer: Blue Microphones
[ 3.906473] usb 2-1.3: SerialNumber: 8827B12755040506
[ 3.914135] systemd[1]: Inserted module 'autofs4'
[ 3.948024] NET: Registered protocol family 10
[ 3.948255] Segment Routing with IPv6
[ 3.960162] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[ 3.971092] usb 2-1.4: new low-speed USB device number 4 using ehci-pci
[ 3.972110] systemd[1]: Detected architecture x86-64.
[ 3.983629] systemd[1]: Set hostname to <localhost>.
[ 4.055973] usb 2-1.4: New USB device found, idVendor=1a2c, idProduct=2124, bcdDevice= 1.10
[ 4.055984] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.055986] usb 2-1.4: Product: USB Keyboard
[ 4.055988] usb 2-1.4: Manufacturer: SEM
[ 4.121029] usb 2-1.5: new low-speed USB device number 5 using ehci-pci
[ 4.122103] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.122117] systemd[1]: Reached target RPC Port Mapper.
[ 4.122181] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.122278] systemd[1]: Listening on Journal Socket.
[ 4.122315] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.123319] systemd[1]: Starting File System Check on Root Device...
[ 4.123577] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.123679] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.123753] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 4.124343] systemd[1]: Starting Setup Virtual Console...
[ 4.188652] EXT4-fs (sdb1): re-mounted. Opts: acl
[ 4.205269] usb 2-1.5: New USB device found, idVendor=18f8, idProduct=0f97, bcdDevice= 1.00
[ 4.205271] usb 2-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.205272] usb 2-1.5: Product: USB OPTICAL MOUSE
[ 4.220037] systemd-journald[541]: Received request to flush runtime journal from PID 1
[ 4.369395] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x000000000000053B-0x000000000000053B (\LLED) (20190816/utaddress-213)
[ 4.369400] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.372004] pps_core: LinuxPPS API ver. 1 registered
[ 4.372015] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.372672] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.374171] PTP clock support registered
[ 4.374904] ipmi device interface
[ 4.404066] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.407249] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 4.407250] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 4.407251] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 4.407251] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 4.416867] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 4.416868] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.420151] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.421045] cryptd: max_cpu_qlen set to 1000
[ 4.426906] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
[ 4.428130] usbcore: registered new interface driver cdc_acm
[ 4.428131] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 4.437670] usbcore: registered new interface driver usbhid
[ 4.437671] usbhid: USB HID core driver
[ 4.456424] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 4.456428] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 4.531734] mc: Linux media interface: v0.10
[ 4.562037] snd_hda_codec_realtek hdaudioC0D0: ALC662 rev1: SKU not ready 0x411111f0
[ 4.562413] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 4.562414] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.562415] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4.562416] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.562416] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.562418] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 4.562419] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 4.562420] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 4.571160] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 4.573976] random: crng init done
[ 4.573977] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.574398] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
[ 4.574436] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[ 4.574469] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 4.574503] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 4.574533] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 4.574564] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.618955] iTCO_vendor_support: vendor-support=0
[ 4.619440] gpio_ich gpio_ich.1.auto: GPIO from 436 to 511
[ 4.619775] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.619808] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 4.619899] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 4.632034] Adding 5794812k swap on /dev/sdb2. Priority:-2 extents:1 across:5794812k SSFS
[ 4.640768] input: Blue Microphones Yeti Nano Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.3/0003:B58E:0005.0001/input/input8
[ 4.659059] usbcore: registered new interface driver snd-usb-audio
[ 4.685670] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) c8:9c:dc:2b:4f:95
[ 4.685671] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.685712] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 4.690125] intel_rapl_common: Found RAPL domain package
[ 4.690126] intel_rapl_common: Found RAPL domain core
[ 4.690127] intel_rapl_common: Found RAPL domain uncore
[ 4.690131] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 4.694742] input: Blue Microphones Yeti Nano as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.3/0003:B58E:0005.0001/input/input9
[ 4.694822] hid-generic 0003:B58E:0005.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Blue Microphones Yeti Nano] on usb-0000:00:1d.0-1.3/input3
[ 4.694958] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:1A2C:2124.0002/input/input10
[ 4.715547] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 4.732992] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 4.747239] hid-generic 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:1d.0-1.4/input0
[ 4.747402] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:1A2C:2124.0003/input/input14
[ 4.799208] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:1A2C:2124.0003/input/input15
[ 4.799280] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 4.799318] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 4.799440] hid-generic 0003:1A2C:2124.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:1d.0-1.4/input1
[ 4.799581] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:18F8:0F97.0004/input/input16
[ 4.802161] hid-generic 0003:18F8:0F97.0004: input,hidraw3: USB HID v1.10 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:1d.0-1.5/input0
[ 4.802361] input: USB OPTICAL MOUSE Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:18F8:0F97.0005/input/input17
[ 4.854223] input: USB OPTICAL MOUSE Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:18F8:0F97.0005/input/input18
[ 4.854530] hid-generic 0003:18F8:0F97.0005: input,hiddev1,hidraw4: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:1d.0-1.5/input1
[ 5.332361] device-mapper: uevent: version 1.0.3
[ 5.332439] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 5.608407] fuse: init (API version 7.31)
[ 5.627698] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: acl
[ 11.856024] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.860261] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 15.225248] netfilter PSD loaded - (c) astaro AG
[ 15.227519] IFWLOG: register target
[ 15.371173] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[ 15.371351] caller _nv000940rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
[ 16.858994] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 16.859062] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 18.164464] NET: Registered protocol family 17
[ 1159.468635] systemd-journald[541]: File /var/log/journal/eb78101d2fd24d1c89cd4a489c8597ff/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 1401.486137] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[ 1401.486304] caller _nv000940rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
[y@localhost ~]$
[y@localhost ~]$ ls -l /dev/ttyACM0
crw-rw---- 1 root dialout 166, 0 déc. 24 10:31 /dev/ttyACM0
[y@localhost ~]$ dmesg
[ 0.000000] microcode: microcode updated early to revision 0x2f, date = 2019-02-17
[ 0.000000] Linux version 5.4.2-desktop-1.mga7 (iurt@scwx861.mageia.org) (gcc version 8.3.1 20191101 (Mageia 8.3.1-0.20191101.1.mga7)) #1 SMP Thu Dec 5 17:40:00 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.4.2-desktop-1.mga7 root=UUID=38f47d5c-131c-4985-b78c-ac4d0fc49493 ro nokmsboot splash quiet noiswmd resume=UUID=7a37d9ea-d7ff-47ae-aa1c-83943c396440 audit=0 vga=791
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf3ddfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf3de000-0x00000000bf425fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf426000-0x00000000bf42dfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf42e000-0x00000000bf4befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf4bf000-0x00000000bf4bffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf4c0000-0x00000000bf4c4fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf4c5000-0x00000000bf4c5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf4c6000-0x00000000bf4d5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf4d6000-0x00000000bf4e0fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf4e1000-0x00000000bf535fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf536000-0x00000000bf578fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf579000-0x00000000bf7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001bf7fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Packard Bell imedia S3840/imedia S3840, BIOS P01-B1 07/08/2011
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x1bf800 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask E00000000 write-back
[ 0.000000] 1 base 0C0000000 mask FC0000000 uncachable
[ 0.000000] 2 base 1BF800000 mask FFF800000 uncachable
[ 0.000000] 3 base 1C0000000 mask FC0000000 uncachable
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xbf800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fcf90-0x000fcf9f]
[ 0.000000] BRK [0x63a01000, 0x63a01fff] PGTABLE
[ 0.000000] BRK [0x63a02000, 0x63a02fff] PGTABLE
[ 0.000000] BRK [0x63a03000, 0x63a03fff] PGTABLE
[ 0.000000] BRK [0x63a04000, 0x63a04fff] PGTABLE
[ 0.000000] BRK [0x63a05000, 0x63a05fff] PGTABLE
[ 0.000000] BRK [0x63a06000, 0x63a06fff] PGTABLE
[ 0.000000] BRK [0x63a07000, 0x63a07fff] PGTABLE
[ 0.000000] BRK [0x63a08000, 0x63a08fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x35101000-0x36878fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0450 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x00000000BF426068 000054 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000BF42D270 0000F4 (v04 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000BF426150 00711A (v02 ACRSYS ACRPRDCT 00000012 INTL 20051117)
[ 0.000000] ACPI: FACS 0x00000000BF4D8F80 000040
[ 0.000000] ACPI: APIC 0x00000000BF42D368 000072 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000BF42D3E0 000102 (v01 AMICPU PROC 00000001 MSFT 03000001)
[ 0.000000] ACPI: MCFG 0x00000000BF42D4E8 00003C (v01 ACRSYS ACRPRDCT 01072009 MSFT 00000097)
[ 0.000000] ACPI: SLIC 0x00000000BF42D528 000176 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 0x00000000BF42D6A0 000038 (v01 ACRSYS ACRPRDCT 01072009 AMI. 00000004)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000001bf7fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x1bf7f9000-0x1bf7fcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x00000001bf7fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf3ddfff]
[ 0.000000] node 0: [mem 0x00000000bf4c5000-0x00000000bf4c5fff]
[ 0.000000] node 0: [mem 0x00000000bf579000-0x00000000bf7fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x00000001bf7fffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 2558 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000001bf7fffff]
[ 0.000000] On node 0 totalpages: 1568258
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12186 pages used for memmap
[ 0.000000] DMA32 zone: 779878 pages, LIFO batch:63
[ 0.000000] Normal zone: 12256 pages used for memmap
[ 0.000000] Normal zone: 784384 pages, LIFO batch:63
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf3de000-0xbf425fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf426000-0xbf42dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf42e000-0xbf4befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4bf000-0xbf4bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4c0000-0xbf4c4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4c6000-0xbf4d5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4d6000-0xbf4e0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf4e1000-0xbf535fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf536000-0xbf578fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf800000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] [mem 0xbf800000-0xfed1bfff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 53 pages/cpu s177816 r8192 d31080 u524288
[ 0.000000] pcpu-alloc: s177816 r8192 d31080 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1543731
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.4.2-desktop-1.mga7 root=UUID=38f47d5c-131c-4985-b78c-ac4d0fc49493 ro nokmsboot splash quiet noiswmd resume=UUID=7a37d9ea-d7ff-47ae-aa1c-83943c396440 audit=0 vga=791
[ 0.000000] audit: disabled (until reboot)
[ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 6044800K/6273032K available (12291K kernel code, 1391K rwdata, 3952K rodata, 1688K init, 1300K bss, 228232K reserved, 0K cma-reserved)
[ 0.000000] random: get_random_u64 called from cache_random_seq_create+0x7c/0x140 with crng_init=0
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Kernel/User page tables isolation: enabled
[ 0.000000] ftrace: allocating 37726 entries in 148 pages
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 8448, nr_irqs: 456, preallocated irqs: 16
[ 0.000000] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] printk: console [tty0] enabled
[ 0.000000] ACPI: Core revision 20190816
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.006000] tsc: PIT calibration matches HPET. 1 loops
[ 0.006000] tsc: Detected 2993.814 MHz processor
[ 0.000002] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2b2771accf3, max_idle_ns: 440795315188 ns
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5987.62 BogoMIPS (lpj=2993814)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000028] LSM: Security Framework initializing
[ 0.000048] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.000061] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.000245] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.000256] process: using mwait in idle threads
[ 0.000258] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.000259] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.000261] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.000262] Spectre V2 : Mitigation: Full generic retpoline
[ 0.000263] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.000263] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.000264] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.000266] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.000268] MDS: Mitigation: Clear CPU buffers
[ 0.000393] Freeing SMP alternatives memory: 36K
[ 0.001473] TSC deadline timer enabled
[ 0.001477] smpboot: CPU0: Intel(R) Core(TM) i5-2320 CPU @ 3.00GHz (family: 0x6, model: 0x2a, stepping: 0x7)
[ 0.001547] Performance Events: PEBS fmt1+, SandyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.001552] ... version: 3
[ 0.001553] ... bit width: 48
[ 0.001553] ... generic registers: 8
[ 0.001554] ... value mask: 0000ffffffffffff
[ 0.001554] ... max period: 00007fffffffffff
[ 0.001555] ... fixed-purpose events: 3
[ 0.001555] ... event mask: 00000007000000ff
[ 0.001582] rcu: Hierarchical SRCU implementation.
[ 0.001957] smp: Bringing up secondary CPUs ...
[ 0.002004] x86: Booting SMP configuration:
[ 0.002004] .... node #0, CPUs: #1
[ 0.003004] TSC synchronization [CPU#0 -> CPU#1]:
[ 0.003004] Measured 5150605350 cycles TSC warp between CPUs, turning off TSC clock.
[ 0.003004] tsc: Marking TSC unstable due to check_tsc_sync_source failed
[ 0.003098] #2 #3
[ 0.005023] smp: Brought up 1 node, 4 CPUs
[ 0.005024] smpboot: Max logical packages: 1
[ 0.005025] smpboot: Total of 4 processors activated (23950.51 BogoMIPS)
[ 0.006210] devtmpfs: initialized
[ 0.006210] x86/mm: Memory block size: 128MB
[ 0.006483] PM: Registering ACPI NVS region [mem 0xbf3de000-0xbf425fff] (294912 bytes)
[ 0.006483] PM: Registering ACPI NVS region [mem 0xbf4bf000-0xbf4bffff] (4096 bytes)
[ 0.006483] PM: Registering ACPI NVS region [mem 0xbf4d6000-0xbf4e0fff] (45056 bytes)
[ 0.006483] PM: Registering ACPI NVS region [mem 0xbf536000-0xbf578fff] (274432 bytes)
[ 0.006483] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.006483] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.006483] xor: automatically using best checksumming function avx
[ 0.006483] pinctrl core: initialized pinctrl subsystem
[ 0.007057] PM: RTC time: 10:07:15, date: 2019-12-24
[ 0.007154] NET: Registered protocol family 16
[ 0.007310] cpuidle: using governor ladder
[ 0.007310] cpuidle: using governor menu
[ 0.007310] ACPI: bus type PCI registered
[ 0.007310] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.007310] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.007310] PCI: not using MMCONFIG
[ 0.007310] PCI: Using configuration type 1 for base access
[ 0.007310] core: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.007330] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.008403] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.026006] raid6: sse2x4 gen() 12804 MB/s
[ 0.043008] raid6: sse2x4 xor() 8613 MB/s
[ 0.060008] raid6: sse2x2 gen() 10835 MB/s
[ 0.077005] raid6: sse2x2 xor() 7386 MB/s
[ 0.094011] raid6: sse2x1 gen() 9250 MB/s
[ 0.111009] raid6: sse2x1 xor() 6554 MB/s
[ 0.111010] raid6: using algorithm sse2x4 gen() 12804 MB/s
[ 0.111011] raid6: .... xor() 8613 MB/s, rmw enabled
[ 0.111012] raid6: using ssse3x2 recovery algorithm
[ 0.111065] ACPI: Added _OSI(Module Device)
[ 0.111066] ACPI: Added _OSI(Processor Device)
[ 0.111066] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.111067] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.111068] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.111068] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.111069] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.113723] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.114430] ACPI: Dynamic OEM Table Load:
[ 0.114434] ACPI: SSDT 0xFFFF91CBB7AA3C00 00038C (v01 AMI IST 00000001 MSFT 03000001)
[ 0.114732] ACPI: Dynamic OEM Table Load:
[ 0.114734] ACPI: SSDT 0xFFFF91CBB785B600 000084 (v01 AMI CST 00000001 MSFT 03000001)
[ 0.115321] ACPI: Interpreter enabled
[ 0.115333] ACPI: (supports S0 S3 S4 S5)
[ 0.115334] ACPI: Using IOAPIC for interrupt routing
[ 0.115358] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.115406] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.115409] pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
[ 0.115704] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.115823] ACPI: Enabled 7 GPEs in block 00 to 3F
[ 0.115984] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.119384] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.119388] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.119484] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[ 0.119570] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.119795] PCI host bridge to bus 0000:00
[ 0.119797] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.119798] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.119799] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.119800] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.119801] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.119802] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.119803] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xffffffff window]
[ 0.119804] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.119811] pci 0000:00:00.0: [8086:0100] type 00 class 0x060000
[ 0.119882] pci 0000:00:01.0: [8086:0101] type 01 class 0x060400
[ 0.119916] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.120019] pci 0000:00:16.0: [8086:1c3a] type 00 class 0x078000
[ 0.120049] pci 0000:00:16.0: reg 0x10: [mem 0xfb129000-0xfb12900f 64bit]
[ 0.120127] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.120202] pci 0000:00:19.0: [8086:1503] type 00 class 0x020000
[ 0.120224] pci 0000:00:19.0: reg 0x10: [mem 0xfb100000-0xfb11ffff]
[ 0.120233] pci 0000:00:19.0: reg 0x14: [mem 0xfb128000-0xfb128fff]
[ 0.120243] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.120303] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.120382] pci 0000:00:1a.0: [8086:1c2d] type 00 class 0x0c0320
[ 0.120406] pci 0000:00:1a.0: reg 0x10: [mem 0xfb127000-0xfb1273ff]
[ 0.120492] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.120571] pci 0000:00:1b.0: [8086:1c20] type 00 class 0x040300
[ 0.120595] pci 0000:00:1b.0: reg 0x10: [mem 0xfb120000-0xfb123fff 64bit]
[ 0.120669] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.120747] pci 0000:00:1c.0: [8086:1c10] type 01 class 0x060400
[ 0.120964] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.121087] pci 0000:00:1d.0: [8086:1c26] type 00 class 0x0c0320
[ 0.121111] pci 0000:00:1d.0: reg 0x10: [mem 0xfb126000-0xfb1263ff]
[ 0.121196] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.121282] pci 0000:00:1f.0: [8086:1c5c] type 00 class 0x060100
[ 0.121508] pci 0000:00:1f.2: [8086:1c02] type 00 class 0x010601
[ 0.121528] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.121536] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.121545] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.121553] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.121560] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.121569] pci 0000:00:1f.2: reg 0x24: [mem 0xfb125000-0xfb1257ff]
[ 0.121613] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.121687] pci 0000:00:1f.3: [8086:1c22] type 00 class 0x0c0500
[ 0.121708] pci 0000:00:1f.3: reg 0x10: [mem 0xfb124000-0xfb1240ff 64bit]
[ 0.121729] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.121836] pci 0000:01:00.0: [10de:1380] type 00 class 0x030000
[ 0.121854] pci 0000:01:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
[ 0.121863] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.121872] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.121878] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.121884] pci 0000:01:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
[ 0.121889] pci 0000:01:00.0: enabling Extended Tags
[ 0.121951] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x16 link at 0000:00:01.0 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[ 0.121981] pci 0000:01:00.1: [10de:0fbc] type 00 class 0x040300
[ 0.121995] pci 0000:01:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
[ 0.122031] pci 0000:01:00.1: enabling Extended Tags
[ 0.122108] pci 0000:00:01.0: ASPM: current common clock configuration is broken, reconfiguring
[ 0.125027] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.125030] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.125033] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
[ 0.125037] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.125141] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.125427] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.125476] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.125523] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.125568] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 *4 5 6 10 11 12 14 15)
[ 0.125616] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.125661] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0
[ 0.125706] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
[ 0.125752] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.125870] iommu: Default domain type: Translated
[ 0.125879] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.125879] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.125879] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.125879] vgaarb: loaded
[ 0.126024] SCSI subsystem initialized
[ 0.126032] libata version 3.00 loaded.
[ 0.126042] EDAC MC: Ver: 3.0.0
[ 0.126069] PCI: Using ACPI for IRQ routing
[ 0.131351] PCI: pci_cache_line_size set to 64 bytes
[ 0.131400] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.131401] e820: reserve RAM buffer [mem 0xbf3de000-0xbfffffff]
[ 0.131402] e820: reserve RAM buffer [mem 0xbf4c6000-0xbfffffff]
[ 0.131403] e820: reserve RAM buffer [mem 0xbf800000-0xbfffffff]
[ 0.131404] e820: reserve RAM buffer [mem 0x1bf800000-0x1bfffffff]
[ 0.131492] NetLabel: Initializing
[ 0.131493] NetLabel: domain hash size = 128
[ 0.131493] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.131506] NetLabel: unlabeled traffic allowed by default
[ 0.132065] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.132068] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.134021] clocksource: Switched to clocksource hpet
[ 0.146462] VFS: Disk quotas dquot_6.6.0
[ 0.146474] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.146526] pnp: PnP ACPI init
[ 0.146644] system 00:00: [mem 0xfed10000-0xfed19fff] has been reserved
[ 0.146645] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.146646] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.146647] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.146649] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.146653] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.146749] system 00:01: [io 0x0a00-0x0a1f] has been reserved
[ 0.146751] system 00:01: [io 0x0a30-0x0a3f] has been reserved
[ 0.146752] system 00:01: [io 0x0a20-0x0a2f] has been reserved
[ 0.146755] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146795] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.146830] system 00:03: [io 0x04d0-0x04d1] has been reserved
[ 0.146833] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146949] system 00:04: [io 0x0400-0x0453] has been reserved
[ 0.146951] system 00:04: [io 0x0458-0x047f] has been reserved
[ 0.146952] system 00:04: [io 0x1180-0x119f] has been reserved
[ 0.146953] system 00:04: [io 0x0500-0x057f] has been reserved
[ 0.146954] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.146956] system 00:04: [mem 0xfec00000-0xfecfffff] could not be reserved
[ 0.146957] system 00:04: [mem 0xfed08000-0xfed08fff] has been reserved
[ 0.146958] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[ 0.146961] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.147002] system 00:05: [io 0x0454-0x0457] has been reserved
[ 0.147020] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.147195] pnp: PnP ACPI: found 6 devices
[ 0.149168] thermal_sys: Registered thermal governor 'fair_share'
[ 0.149168] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.149169] thermal_sys: Registered thermal governor 'step_wise'
[ 0.149170] thermal_sys: Registered thermal governor 'user_space'
[ 0.149170] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.153724] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.153753] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.153755] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.153758] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfb0fffff]
[ 0.153759] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.153762] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.153788] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.153789] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.153790] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.153791] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.153792] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.153793] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.153794] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xffffffff window]
[ 0.153795] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.153796] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfb0fffff]
[ 0.153797] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.153855] NET: Registered protocol family 2
[ 0.153967] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.153980] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.154072] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.154182] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.154203] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.154221] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.154280] NET: Registered protocol family 1
[ 0.154285] NET: Registered protocol family 44
[ 0.273133] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x644 took 116035 usecs
[ 0.391126] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x644 took 115204 usecs
[ 0.391164] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.391183] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.391190] PCI: CLS 64 bytes, default 64
[ 0.391253] Trying to unpack rootfs image as initramfs...
[ 0.550551] Freeing initrd memory: 24032K
[ 0.550582] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.550583] software IO TLB: mapped [mem 0xbb3de000-0xbf3de000] (64MB)
[ 0.552162] Initialise system trusted keyrings
[ 0.552199] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.553531] zbud: loaded
[ 0.558401] Key type asymmetric registered
[ 0.558402] Asymmetric key parser 'x509' registered
[ 0.558410] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.558448] io scheduler mq-deadline registered
[ 0.558449] io scheduler kyber registered
[ 0.558479] io scheduler bfq registered
[ 0.558756] pcieport 0000:00:01.0: PME: Signaling with IRQ 24
[ 0.558947] pcieport 0000:00:1c.0: PME: Signaling with IRQ 25
[ 0.559088] vesafb: mode is 1024x768x16, linelength=2048, pages=1
[ 0.559088] vesafb: scrolling: redraw
[ 0.559090] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.559102] vesafb: framebuffer at 0xd1000000, mapped to 0x(____ptrval____), using 3072k, total 14336k
[ 0.559181] Console: switching to colour frame buffer device 128x48
[ 0.576924] fb0: VESA VGA frame buffer device
[ 0.576935] intel_idle: MWAIT substates: 0x1120
[ 0.576936] intel_idle: v0.4.1 model 0x2A
[ 0.577081] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.577476] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.577834] Linux agpgart interface v0.103
[ 0.579489] brd: module loaded
[ 0.579800] ahci 0000:00:1f.2: version 3.0
[ 0.579943] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.579946] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 0.582417] scsi host0: ahci
[ 0.582640] scsi host1: ahci
[ 0.582806] scsi host2: ahci
[ 0.582919] scsi host3: ahci
[ 0.582964] ata1: SATA max UDMA/133 abar m2048@0xfb125000 port 0xfb125100 irq 26
[ 0.582967] ata2: SATA max UDMA/133 abar m2048@0xfb125000 port 0xfb125180 irq 26
[ 0.582967] ata3: DUMMY
[ 0.582968] ata4: DUMMY
[ 0.583022] i8042: PNP: No PS/2 controller found.
[ 0.583078] mousedev: PS/2 mouse device common for all mice
[ 0.583110] rtc_cmos 00:02: RTC can wake from S4
[ 0.583415] rtc_cmos 00:02: registered as rtc0
[ 0.583426] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.583434] intel_pstate: Intel P-state driver initializing
[ 0.583606] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.583789] Key type dns_resolver registered
[ 0.583790] mpls_gso: MPLS GSO support
[ 0.584138] microcode: sig=0x206a7, pf=0x2, revision=0x2f
[ 0.584263] microcode: Microcode Update Driver: v2.2.
[ 0.584267] IPI shorthand broadcast: enabled
[ 0.584352] registered taskstats version 1
[ 0.584353] Loading compiled-in X.509 certificates
[ 0.584401] zswap: loaded using pool lzo/zbud
[ 0.584578] Key type ._fscrypt registered
[ 0.584579] Key type .fscrypt registered
[ 0.585144] Btrfs loaded, crc32c=crc32c-generic
[ 0.590819] Key type encrypted registered
[ 0.591262] PM: Magic number: 15:963:123
[ 0.591292] acpi LNXSYBUS:01: hash matches
[ 0.591446] rtc_cmos 00:02: setting system clock to 2019-12-24T10:07:16 UTC (1577182036)
[ 0.591539] BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
[ 0.895524] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.895550] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.899155] ata1.00: ATA-8: WDC WD20EARS-22MVWB0, 51.0AB51, max UDMA/133
[ 0.899158] ata1.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 0.899636] ata2.00: ATA-9: SanDisk SDSSDA240G, Z33130RL, max UDMA/133
[ 0.899639] ata2.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.902910] ata1.00: configured for UDMA/133
[ 0.903275] scsi 0:0:0:0: Direct-Access ATA WDC WD20EARS-22M AB51 PQ: 0 ANSI: 5
[ 0.904083] sd 0:0:0:0: [sda] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[ 0.904086] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 0.904127] sd 0:0:0:0: [sda] Write Protect is off
[ 0.904130] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.904254] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.909282] ata2.00: configured for UDMA/133
[ 0.909597] scsi 1:0:0:0: Direct-Access ATA SanDisk SDSSDA24 30RL PQ: 0 ANSI: 5
[ 0.910570] sd 1:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 0.910620] sd 1:0:0:0: [sdb] Write Protect is off
[ 0.910623] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 0.910711] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.912407] sdb: sdb1 sdb2 sdb3 sdb4
[ 0.913669] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 0.918241] sda: sda1 sda2 sda3 sda4
[ 0.919555] sd 0:0:0:0: [sda] Attached SCSI disk
[ 0.919603] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 0.921748] Freeing unused kernel image memory: 1688K
[ 0.925042] Write protecting the kernel read-only data: 18432k
[ 0.925818] Freeing unused kernel image memory: 2020K
[ 0.926042] Freeing unused kernel image memory: 144K
[ 0.935685] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.935686] x86/mm: Checking user space page tables
[ 0.942725] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.942726] Run /init as init process
[ 1.009518] dracut: dracut-046
[ 1.239435] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 1.239485] ACPI: Power Button [PWRB]
[ 1.239523] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 1.239551] ACPI: Power Button [PWRF]
[ 1.344081] IPMI message handler: version 39.2
[ 2.007394] nvidia: loading out-of-tree module taints kernel.
[ 2.007402] nvidia: module license 'NVIDIA' taints kernel.
[ 2.007403] Disabling lock debugging due to kernel taint
[ 2.019089] nvidia-nvlink: Nvlink Core is being initialized, major device number 247
[ 2.019462] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.219131] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 430.64 Sun Oct 27 11:26:12 UTC 2019
[ 2.256039] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms 430.64 Sun Oct 27 11:08:21 UTC 2019
[ 2.258813] [drm] [nvidia-drm] [GPU ID 0x00000100] Loading driver
[ 2.258814] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:01:00.0 on minor 0
[ 2.934093] dracut: Starting plymouth daemon
[ 3.078081] ACPI: bus type USB registered
[ 3.078099] usbcore: registered new interface driver usbfs
[ 3.078106] usbcore: registered new interface driver hub
[ 3.078127] usbcore: registered new device driver usb
[ 3.082512] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.083040] ehci-pci: EHCI PCI platform driver
[ 3.083152] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 3.083159] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 3.083173] ehci-pci 0000:00:1a.0: debug port 2
[ 3.087083] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 3.087105] ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb127000
[ 3.094047] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 3.094094] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 3.094096] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.094097] usb usb1: Product: EHCI Host Controller
[ 3.094098] usb usb1: Manufacturer: Linux 5.4.2-desktop-1.mga7 ehci_hcd
[ 3.094099] usb usb1: SerialNumber: 0000:00:1a.0
[ 3.094204] hub 1-0:1.0: USB hub found
[ 3.094209] hub 1-0:1.0: 2 ports detected
[ 3.094451] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 3.094455] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 3.094466] ehci-pci 0000:00:1d.0: debug port 2
[ 3.098368] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 3.098386] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb126000
[ 3.105119] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 3.105156] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[ 3.105157] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.105158] usb usb2: Product: EHCI Host Controller
[ 3.105159] usb usb2: Manufacturer: Linux 5.4.2-desktop-1.mga7 ehci_hcd
[ 3.105160] usb usb2: SerialNumber: 0000:00:1d.0
[ 3.105261] hub 2-0:1.0: USB hub found
[ 3.105266] hub 2-0:1.0: 2 ports detected
[ 3.143540] PM: Image not found (code -22)
[ 3.160174] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.187099] dracut: Checking ext4: /dev/disk/by-uuid/38f47d5c-131c-4985-b78c-ac4d0fc49493
[ 3.187227] dracut: issuing e2fsck -a /dev/disk/by-uuid/38f47d5c-131c-4985-b78c-ac4d0fc49493
[ 3.193415] dracut: /dev/disk/by-uuid/38f47d5c-131c-4985-b78c-ac4d0fc49493: clean, 207143/2580480 files, 1893172/10314752 blocks
[ 3.195095] dracut: Mounting /dev/disk/by-uuid/38f47d5c-131c-4985-b78c-ac4d0fc49493 with -o rw,relatime,ro
[ 3.196727] random: fast init done
[ 3.198320] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 3.223300] dracut: Mounted root filesystem /dev/sdb1
[ 3.419044] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.427033] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 3.547438] usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 3.547440] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.547703] hub 1-1:1.0: USB hub found
[ 3.547773] hub 1-1:1.0: 4 ports detected
[ 3.555430] usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
[ 3.555431] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.555669] hub 2-1:1.0: USB hub found
[ 3.555771] hub 2-1:1.0: 6 ports detected
[ 3.801628] dracut: Switching root
[ 3.818045] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[ 3.825041] usb 2-1.3: new full-speed USB device number 3 using ehci-pci
[ 3.895040] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 3.898452] usb 1-1.2: New USB device found, idVendor=8087, idProduct=0ab6, bcdDevice=80.87
[ 3.898454] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.898456] usb 1-1.2: Product: GENUINO 101
[ 3.898458] usb 1-1.2: Manufacturer: Intel
[ 3.898460] usb 1-1.2: SerialNumber: AE6771SQ55200B5
[ 3.906464] usb 2-1.3: New USB device found, idVendor=b58e, idProduct=0005, bcdDevice= 4.05
[ 3.906467] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.906469] usb 2-1.3: Product: Yeti Nano
[ 3.906471] usb 2-1.3: Manufacturer: Blue Microphones
[ 3.906473] usb 2-1.3: SerialNumber: 8827B12755040506
[ 3.914135] systemd[1]: Inserted module 'autofs4'
[ 3.948024] NET: Registered protocol family 10
[ 3.948255] Segment Routing with IPv6
[ 3.960162] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN -PCRE2 default-hierarchy=hybrid)
[ 3.971092] usb 2-1.4: new low-speed USB device number 4 using ehci-pci
[ 3.972110] systemd[1]: Detected architecture x86-64.
[ 3.983629] systemd[1]: Set hostname to <localhost>.
[ 4.055973] usb 2-1.4: New USB device found, idVendor=1a2c, idProduct=2124, bcdDevice= 1.10
[ 4.055984] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.055986] usb 2-1.4: Product: USB Keyboard
[ 4.055988] usb 2-1.4: Manufacturer: SEM
[ 4.121029] usb 2-1.5: new low-speed USB device number 5 using ehci-pci
[ 4.122103] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.122117] systemd[1]: Reached target RPC Port Mapper.
[ 4.122181] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.122278] systemd[1]: Listening on Journal Socket.
[ 4.122315] random: systemd: uninitialized urandom read (16 bytes read)
[ 4.123319] systemd[1]: Starting File System Check on Root Device...
[ 4.123577] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 4.123679] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 4.123753] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 4.124343] systemd[1]: Starting Setup Virtual Console...
[ 4.188652] EXT4-fs (sdb1): re-mounted. Opts: acl
[ 4.205269] usb 2-1.5: New USB device found, idVendor=18f8, idProduct=0f97, bcdDevice= 1.00
[ 4.205271] usb 2-1.5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 4.205272] usb 2-1.5: Product: USB OPTICAL MOUSE
[ 4.220037] systemd-journald[541]: Received request to flush runtime journal from PID 1
[ 4.369395] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x000000000000053B-0x000000000000053B (\LLED) (20190816/utaddress-213)
[ 4.369400] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.372004] pps_core: LinuxPPS API ver. 1 registered
[ 4.372015] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.372672] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.374171] PTP clock support registered
[ 4.374904] ipmi device interface
[ 4.404066] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.407249] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 4.407250] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 4.407251] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 4.407251] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 4.416867] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 4.416868] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.420151] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.421045] cryptd: max_cpu_qlen set to 1000
[ 4.426906] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
[ 4.428130] usbcore: registered new interface driver cdc_acm
[ 4.428131] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 4.437670] usbcore: registered new interface driver usbhid
[ 4.437671] usbhid: USB HID core driver
[ 4.456424] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 4.456428] snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
[ 4.531734] mc: Linux media interface: v0.10
[ 4.562037] snd_hda_codec_realtek hdaudioC0D0: ALC662 rev1: SKU not ready 0x411111f0
[ 4.562413] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC662 rev1: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 4.562414] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.562415] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4.562416] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 4.562416] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 4.562418] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
[ 4.562419] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
[ 4.562420] snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
[ 4.571160] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 4.573976] random: crng init done
[ 4.573977] random: 7 urandom warning(s) missed due to ratelimiting
[ 4.574398] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input2
[ 4.574436] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input3
[ 4.574469] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
[ 4.574503] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
[ 4.574533] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 4.574564] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 4.618955] iTCO_vendor_support: vendor-support=0
[ 4.619440] gpio_ich gpio_ich.1.auto: GPIO from 436 to 511
[ 4.619775] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.619808] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[ 4.619899] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 4.632034] Adding 5794812k swap on /dev/sdb2. Priority:-2 extents:1 across:5794812k SSFS
[ 4.640768] input: Blue Microphones Yeti Nano Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.3/0003:B58E:0005.0001/input/input8
[ 4.659059] usbcore: registered new interface driver snd-usb-audio
[ 4.685670] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) c8:9c:dc:2b:4f:95
[ 4.685671] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.685712] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[ 4.690125] intel_rapl_common: Found RAPL domain package
[ 4.690126] intel_rapl_common: Found RAPL domain core
[ 4.690127] intel_rapl_common: Found RAPL domain uncore
[ 4.690131] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 4.694742] input: Blue Microphones Yeti Nano as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.3/0003:B58E:0005.0001/input/input9
[ 4.694822] hid-generic 0003:B58E:0005.0001: input,hiddev0,hidraw0: USB HID v1.11 Device [Blue Microphones Yeti Nano] on usb-0000:00:1d.0-1.3/input3
[ 4.694958] input: SEM USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/0003:1A2C:2124.0002/input/input10
[ 4.715547] e1000e 0000:00:19.0 eno1: renamed from eth0
[ 4.732992] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 4.747239] hid-generic 0003:1A2C:2124.0002: input,hidraw1: USB HID v1.10 Keyboard [SEM USB Keyboard] on usb-0000:00:1d.0-1.4/input0
[ 4.747402] input: SEM USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:1A2C:2124.0003/input/input14
[ 4.799208] input: SEM USB Keyboard System Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.1/0003:1A2C:2124.0003/input/input15
[ 4.799280] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 4.799318] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 4.799440] hid-generic 0003:1A2C:2124.0003: input,hidraw2: USB HID v1.10 Device [SEM USB Keyboard] on usb-0000:00:1d.0-1.4/input1
[ 4.799581] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/0003:18F8:0F97.0004/input/input16
[ 4.802161] hid-generic 0003:18F8:0F97.0004: input,hidraw3: USB HID v1.10 Mouse [USB OPTICAL MOUSE ] on usb-0000:00:1d.0-1.5/input0
[ 4.802361] input: USB OPTICAL MOUSE Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:18F8:0F97.0005/input/input17
[ 4.854223] input: USB OPTICAL MOUSE Consumer Control as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/0003:18F8:0F97.0005/input/input18
[ 4.854530] hid-generic 0003:18F8:0F97.0005: input,hiddev1,hidraw4: USB HID v1.10 Keyboard [USB OPTICAL MOUSE ] on usb-0000:00:1d.0-1.5/input1
[ 5.332361] device-mapper: uevent: version 1.0.3
[ 5.332439] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
[ 5.608407] fuse: init (API version 7.31)
[ 5.627698] EXT4-fs (sdb3): mounted filesystem with ordered data mode. Opts: acl
[ 11.856024] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.860261] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 15.225248] netfilter PSD loaded - (c) astaro AG
[ 15.227519] IFWLOG: register target
[ 15.371173] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[ 15.371351] caller _nv000940rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
[ 16.858994] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 16.859062] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 18.164464] NET: Registered protocol family 17
[ 1159.468635] systemd-journald[541]: File /var/log/journal/eb78101d2fd24d1c89cd4a489c8597ff/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 1401.486137] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[ 1401.486304] caller _nv000940rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
[y@localhost ~]$
Édité par yomdr Le 24/12/2019 à 10h41
intel core i5 2320 ; géforce gtx750 ti
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
Je me demande s'il n'y a pas aussi des soucis de droit d'accès à un verrou, qui devrait être écrit dans /var/lock. Sur Mageia, c'est un lien vers /run/lock, donc créé à chaque démarrage. Il appartient à root:root.
Est-ce que si tu démarres l'atelier en root (juste pour essai), tu passes outre les blocages lors de l'écriture du programme ?
La solution donnée dans ce post pour Fedora risque de ne marcher que pendant une session. De plus j'ai des doutes sur la syntaxe.
Yves
Jybz Membre non connecté
-
- Voir le profil du membre Jybz
- Inscrit le : 10/10/2018
- Groupes :
-
Administrateur
-
Forgeron
Pour moi :
Code TEXT :
$ groups jybz video dialout vboxusers vboxsf
Cependant, ta première commande avec avrdude me laisse croire qu'il y a un autre problème, autre que les droits.
Téléverser une image : /wiki/hebergement-de-fichiers-sur-mlo
| Arch | Machine | OS |
| x86_64 | lenovo x250 | mga9 |
| armv7hl | bananapro | mga9 |
| aarch64 | Raspberry Pi 4B | mga9 |
Jybz Membre non connecté
-
- Voir le profil du membre Jybz
- Inscrit le : 10/10/2018
- Groupes :
-
Administrateur
-
Forgeron
yomdr :
j'ai installé les périfériques de la carte comme le logiciel me l'a proposé
j'ai installé les périfériques de la carte comme le logiciel me l'a proposé
Quelle carte précisément ?
Téléverser une image : /wiki/hebergement-de-fichiers-sur-mlo
| Arch | Machine | OS |
| x86_64 | lenovo x250 | mga9 |
| armv7hl | bananapro | mga9 |
| aarch64 | Raspberry Pi 4B | mga9 |
yomdr Membre non connecté
-
- Voir le profil du membre yomdr
- Inscrit le : 23/12/2019
intel core i5 2320 ; géforce gtx750 ti
Jybz Membre non connecté
-
- Voir le profil du membre Jybz
- Inscrit le : 10/10/2018
- Groupes :
-
Administrateur
-
Forgeron
Est-ce Genuino 101 ?
J'ai lu quelques choses sur internet,
comme des incompatibilités avec networkmanager,
appuyer sur le bouton MASTER_RESET lors de la tentative de programmation du microcontroleur https://arduino.stackexchange.com/a/41800
ainsi que d'autre recettes de grand mère pour exorciser la carte ou le système d'exploitation.
Le résultat de la commande avec DMESG n'est pas intéressante. Peux tu :
débrancher l'arduino,
rebrancher l'arduino,
taper :
dmesg | tail -n 20
(pour n'avoir que les 20 dernières lignes)
?
Téléverser une image : /wiki/hebergement-de-fichiers-sur-mlo
| Arch | Machine | OS |
| x86_64 | lenovo x250 | mga9 |
| armv7hl | bananapro | mga9 |
| aarch64 | Raspberry Pi 4B | mga9 |
yomdr Membre non connecté
-
- Voir le profil du membre yomdr
- Inscrit le : 23/12/2019
quand je le rentre dans la console ,ça me donne ça
[y@localhost ~]$ dmesg | tail -n 20
[ 182.710696] usb 1-1.2: Manufacturer: Intel
[ 182.710697] usb 1-1.2: SerialNumber: AE6771SQ55200B5
[ 182.726967] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
[ 182.727563] usbcore: registered new interface driver cdc_acm
[ 182.727564] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 185.530526] usb 1-1.2: USB disconnect, device number 4
[ 191.657051] usb 1-1.2: new full-speed USB device number 5 using ehci-pci
[ 191.743984] usb 1-1.2: New USB device found, idVendor=8087, idProduct=0aba, bcdDevice=80.87
[ 191.743988] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 191.743990] usb 1-1.2: Product: GENUINO 101
[ 191.743991] usb 1-1.2: Manufacturer: Intel
[ 191.743993] usb 1-1.2: SerialNumber: AE6771SQ55200B5
[ 196.421452] usb 1-1.2: USB disconnect, device number 5
[ 196.593108] usb 1-1.2: new full-speed USB device number 6 using ehci-pci
[ 196.673461] usb 1-1.2: New USB device found, idVendor=8087, idProduct=0ab6, bcdDevice=80.87
[ 196.673464] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 196.673466] usb 1-1.2: Product: GENUINO 101
[ 196.673468] usb 1-1.2: Manufacturer: Intel
[ 196.673470] usb 1-1.2: SerialNumber: AE6771SQ55200B5
[ 196.675953] cdc_acm 1-1.2:1.0: ttyACM0: USB ACM device
[y@localhost ~]$
intel core i5 2320 ; géforce gtx750 ti
nic80 Membre non connecté
-
- Voir le profil du membre nic80
- Inscrit le : 06/08/2018
- Groupes :
-
Modérateur
La carte a été branchée une fois puis débranchée ?
Si ce n' est pas le cas, peut être y a t' il un problème de connexion, parce qu' ici il y a détection en périphérique 4, puis en périphérique 5, ce qui est illogique (le noyau n' a probablement pas besoin de découvir l' arduino 2 fois)
yomdr Membre non connecté
-
- Voir le profil du membre yomdr
- Inscrit le : 23/12/2019
[y@localhost ~]$ dmesg | tail -n 20
[ 11.832478] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 11.836497] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 15.207813] netfilter PSD loaded - (c) astaro AG
[ 15.210259] IFWLOG: register target
[ 15.351692] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans more than PCI Bus 0000:00 [mem 0x000c0000-0x000dffff window]
[ 15.351913] caller _nv000940rm+0x1bf/0x1f0 [nvidia] mapping multiple BARs
[ 16.910729] e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 16.910775] IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
[ 18.210430] NET: Registered protocol family 17
[ 457.270966] net-fw DROP IN=eno1 OUT= MAC=c8:9c:dc:2b:4f:95:24:95:04:83:0e:58:08:00 SRC=80.247.237.213 DST=192.168.1.50 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=443 DPT=53504 WINDOW=0 RES=0x00 RST URGP=0
[ 457.272646] net-fw DROP IN=eno1 OUT= MAC=c8:9c:dc:2b:4f:95:24:95:04:83:0e:58:08:00 SRC=80.247.237.213 DST=192.168.1.50 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=443 DPT=53504 WINDOW=0 RES=0x00 RST URGP=0
[ 672.153387] net-fw DROP IN=eno1 OUT= MAC=c8:9c:dc:2b:4f:95:24:95:04:83:0e:58:08:00 SRC=80.247.233.145 DST=192.168.1.50 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=443 DPT=53640 WINDOW=0 RES=0x00 RST URGP=0
[ 672.154047] net-fw DROP IN=eno1 OUT= MAC=c8:9c:dc:2b:4f:95:24:95:04:83:0e:58:08:00 SRC=80.247.233.145 DST=192.168.1.50 LEN=40 TOS=0x00 PREC=0x00 TTL=55 ID=0 DF PROTO=TCP SPT=443 DPT=53640 WINDOW=0 RES=0x00 RST URGP=0
[ 687.118042] usb 1-1.2: USB disconnect, device number 3
[ 695.513048] usb 1-1.1: new full-speed USB device number 4 using ehci-pci
[ 695.599746] usb 1-1.1: New USB device found, idVendor=8087, idProduct=0aba, bcdDevice=80.87
[ 695.599749] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 695.599751] usb 1-1.1: Product: GENUINO 101
[ 695.599753] usb 1-1.1: Manufacturer: Intel
[ 695.599754] usb 1-1.1: SerialNumber: AE6771SQ55200B5
[y@localhost ~]$
intel core i5 2320 ; géforce gtx750 ti
Jybz Membre non connecté
-
- Voir le profil du membre Jybz
- Inscrit le : 10/10/2018
- Groupes :
-
Administrateur
-
Forgeron
VID=8087 PID=0ABA
Puis, dans un second temps c'est
VID=8087 PID=0AB6
Peux tu taper en console :
dmesg --follow
Débrancher l'arduino,
attendre 10 secondes
rebrancher l'arduino
attendre 10 secondes
Appuyer sur RESET
attendre 10 secondes
appuyer sur RESET_MASTER
attendre 10 secondes
il doit y en avoir des lignes, mais j'ai l'impression que le problème est lié à l'arduino et son chargeur de démarrage.
Le résultat attendu est, qu'au bout de 5 seconde, l'arduino change son mode, passant de PID=0ABA à PID=0AB6.
Téléverser une image : /wiki/hebergement-de-fichiers-sur-mlo
| Arch | Machine | OS |
| x86_64 | lenovo x250 | mga9 |
| armv7hl | bananapro | mga9 |
| aarch64 | Raspberry Pi 4B | mga9 |
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie