Forum

Bonjour,
j'ai un petit problème quand même bien embêtant qui est que mon appareil photo n'est pas reconnu par Mageia 5. Je le branche par l'USB et puis... Rien... Comment faire pour le faire reconnaitre? D'avance merci!

Édité par totof Le 04/06/2016 à 19h10

Essaie encore après avoir installé gvfs-mtp.

Bonjour,

Brancher l'USB est bien mais il faut aussi mettre l'APN sous tension.

Merci pour vos réponses. Magnum77, je viens d'installer gvfs-mtp. De retour chez moi j'essaie de rebrancher l'APN. Je vous tiens au courant!

Bonjour,
alors résultat de gvfs-mtp : aucun . Ca ne marche pas. Mageia reste désespérément muet quand je le branche.
Y aurait-il d'autres pistes? D'avance merci!

Bonjour,
Donc, tu branches ton APN en USB, tu le mets sous tension et rien n'apparaît dans la boite à miniature.
As tu essayé une autre prise USB ?
Quel bureau utilises tu ?

Bonjour et merci de ta réponse.
Quelque chose me pose question dans ta réponse, c'est la boite à miniature. Kezako? Je dois dire que je m'attendais à le voir apparaître comme un autre périphérique! Je le cherche dans mon arborescence mais je ne trouve rien.
Oui, j'ai essayé toute mes prises USB. Je suis sur Cinnamon.

Bonjour,
Je ne connais pas Cinnamon, mais ton appareil photo devrait apparaître comme une clé USB, avec éventuellement un choix d'options différent.
La boite à miniatures (peut-être cette désignation est obsolète) sont les petites icônes dans la barre des tâches auprès de l'horloge dans KDE, là où ont aussi les notifications.

Bonsoir
Les menus des Fuji sont quelquefois déconcertants. Il y a peut être un réglage pour l'USB dans l'appareil ?
Je viens de vérifier que mon fuji X10 est bien compatible pour lire les photos en USB .
D'habitude je retire la carte SD pour la mettre dans le lecteur de cartes, et recopier les nouvelles photos. C'est plus rapide.

Édité par christian_fisch Le 10/04/2016 à 01h12

Bonsoir et merci pour vos réponses. Je ne pense pas qu'il y ait un réglage dans l'appareil photo. En effet, je l'ai branché sur un ordi Ubuntu qui l'a détecté normalement. Donc, ça ne vient pas de l'appareil photo. Je vais essayer de passer par le lecteur de carte.

Édité par totof Le 15/04/2016 à 01h46

Exécute une fois dmesg dans une console appareil déconnecté. Connecte l'appareil et recommence la commande.
Quelles sont les nouvelles lignes ?
Ceci doit nous dire ce que le système reconnait comme matériel.

Bonsoir, alors Papoteur, merci de ta réponse. Voici le résultat de ta commande:

<span class="formatter-hide">Caché:</span><div class="hide" onclick="bb_hide(this)"><div class="hide2">[ch@localhost ~]$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.15-desktop-2.mga5 (iurt@sucuk.mageia.org) (gcc version 4.9.2 (GCC) ) #1 SMP Wed Jan 20 17:05:51 UTC 2016
[ 0.000000] Command line: BOOT_IMAGE=linux root=UUID=26c3a100-5cd4-476d-afcd-a6c3ae6ba91b splash quiet noiswmd resume=UUID=a1661c85-cc19-4105-8dfb-4d27259402a6 vga=788
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b3680fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b3681000-0x00000000b36befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b36bf000-0x00000000b3735fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b3736000-0x00000000b37befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b37bf000-0x00000000b37ddfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b37de000-0x00000000b37fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b37ff000-0x00000000b37fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b3800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Acer Aspire 5733Z/Aspire 5733Z, BIOS V1.08 03/21/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0B4000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0B3800000 mask FFF800000 uncachable
[ 0.000000] 6 base 100000000 mask FC0000000 write-back
[ 0.000000] 7 base 138000000 mask FF8000000 uncachable
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: last_pfn = 0xb3800 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01f4b000, 0x01f4bfff] PGTABLE
[ 0.000000] BRK [0x01f4c000, 0x01f4cfff] PGTABLE
[ 0.000000] BRK [0x01f4d000, 0x01f4dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x137e00000-0x137ffffff]
[ 0.000000] [mem 0x137e00000-0x137ffffff] page 2M
[ 0.000000] BRK [0x01f4e000, 0x01f4efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x137dfffff]
[ 0.000000] [mem 0x120000000-0x137dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[ 0.000000] [mem 0x100000000-0x11fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xb3680fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xb35fffff] page 2M
[ 0.000000] [mem 0xb3600000-0xb3680fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb36bf000-0xb3735fff]
[ 0.000000] [mem 0xb36bf000-0xb3735fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb37bf000-0xb37ddfff]
[ 0.000000] [mem 0xb37bf000-0xb37ddfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb37ff000-0xb37fffff]
[ 0.000000] [mem 0xb37ff000-0xb37fffff] page 4k
[ 0.000000] RAMDISK: [mem 0x3773a000-0x37feffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x00000000B37FE120 00007C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0x00000000B37FC000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT 0x00000000B37E9000 00F21B (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: FACS 0x00000000B375A000 000040
[ 0.000000] ACPI: FACS 0x00000000B375A000 000040
[ 0.000000] ACPI: ASF! 0x00000000B37FD000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: HPET 0x00000000B37FB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: APIC 0x00000000B37FA000 00008C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG 0x00000000B37F9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC 0x00000000B37E8000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT 0x00000000B37E5000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: ASPT 0x00000000B37E1000 000034 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SSDT 0x00000000B37E0000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000B37DF000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000B37DE000 00049F (v01 PmRef ApTst 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x137ff8000-0x137ffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133a00000-ffff8801375fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000137ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000b3680fff]
[ 0.000000] node 0: [mem 0x00000000b36bf000-0x00000000b3735fff]
[ 0.000000] node 0: [mem 0x00000000b37bf000-0x00000000b37ddfff]
[ 0.000000] node 0: [mem 0x00000000b37ff000-0x00000000b37fffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000137ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000137ffffff]
[ 0.000000] On node 0 totalpages: 964276
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11421 pages used for memmap
[ 0.000000] DMA32 zone: 730904 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 229376 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xb8000000-0xbfffffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb3681000-0xb36befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb3736000-0xb37befff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb37de000-0xb37fefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb3800000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1afff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1b000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffe7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe80000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 34 pages/cpu @ffff880137c00000 s99224 r8192 d31848 u262144
[ 0.000000] pcpu-alloc: s99224 r8192 d31848 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 949186
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=linux root=UUID=26c3a100-5cd4-476d-afcd-a6c3ae6ba91b splash quiet noiswmd resume=UUID=a1661c85-cc19-4105-8dfb-4d27259402a6 vga=788
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3703552K/3857104K available (7129K kernel code, 1177K rwdata, 3428K rodata, 1340K init, 816K bss, 153552K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:4352 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2261.572 MHz processor
[ 0.000037] Calibrating delay loop (skipped), value calculated using timer frequency.. 4523.14 BogoMIPS (lpj=2261572)
[ 0.000040] pid_max: default: 32768 minimum: 301
[ 0.000047] ACPI: Core revision 20150410
[ 0.016684] ACPI: All ACPI Tables successfully acquired
[ 0.016710] Security Framework initialized
[ 0.016721] TOMOYO Linux initialized
[ 0.017028] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018272] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.018870] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.018878] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.019136] Initializing cgroup subsys blkio
[ 0.019140] Initializing cgroup subsys devices
[ 0.019143] Initializing cgroup subsys freezer
[ 0.019146] Initializing cgroup subsys net_cls
[ 0.019168] CPU: Physical Processor ID: 0
[ 0.019169] CPU: Processor Core ID: 0
[ 0.019175] mce: CPU supports 9 MCE banks
[ 0.019185] CPU0: Thermal monitoring enabled (TM1)
[ 0.019194] process: using mwait in idle threads
[ 0.019197] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.019199] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.019597] Freeing SMP alternatives memory: 24K (ffffffff81e77000 - ffffffff81e7d000)
[ 0.186219] ftrace: allocating 26396 entries in 104 pages
[ 0.201843] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.313690] smpboot: CPU0: Intel(R) Pentium(R) CPU P6300 @ 2.27GHz (fam: 06, model: 25, stepping: 05)
[ 0.313722] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.313742] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.313745] ... version: 3
[ 0.313746] ... bit width: 48
[ 0.313746] ... generic registers: 4
[ 0.313748] ... value mask: 0000ffffffffffff
[ 0.313749] ... max period: 000000007fffffff
[ 0.313750] ... fixed-purpose events: 3
[ 0.313751] ... event mask: 000000070000000f
[ 0.314406] x86: Booting SMP configuration:
[ 0.314409] .... node #0, CPUs: #1
[ 0.327570] x86: Booted up 1 node, 2 CPUs
[ 0.327575] smpboot: Total of 2 processors activated (9046.28 BogoMIPS)
[ 0.328848] devtmpfs: initialized
[ 0.331863] PM: Registering ACPI NVS region [mem 0xb3736000-0xb37befff] (561152 bytes)
[ 0.331949] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.332023] xor: measuring software checksum speed
[ 0.341698] prefetch64-sse: 9248.000 MB/sec
[ 0.351700] generic_sse: 8220.000 MB/sec
[ 0.351702] xor: using function: prefetch64-sse (9248.000 MB/sec)
[ 0.351710] pinctrl core: initialized pinctrl subsystem
[ 0.351827] RTC time: 14:31:01, date: 04/19/16
[ 0.351948] NET: Registered protocol family 16
[ 0.356565] cpuidle: using governor ladder
[ 0.362561] cpuidle: using governor menu
[ 0.362667] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.362669] ACPI: bus type PCI registered
[ 0.362671] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.362757] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.362760] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.363340] PCI: Using configuration type 1 for base access
[ 0.386719] raid6: sse2x1 gen() 5480 MB/s
[ 0.403716] raid6: sse2x1 xor() 4361 MB/s
[ 0.420727] raid6: sse2x2 gen() 6433 MB/s
[ 0.437729] raid6: sse2x2 xor() 5152 MB/s
[ 0.454733] raid6: sse2x4 gen() 7132 MB/s
[ 0.471736] raid6: sse2x4 xor() 5484 MB/s
[ 0.471737] raid6: using algorithm sse2x4 gen() 7132 MB/s
[ 0.471738] raid6: .... xor() 5484 MB/s, rmw enabled
[ 0.471740] raid6: using ssse3x2 recovery algorithm
[ 0.471841] ACPI: Added _OSI(Module Device)
[ 0.471843] ACPI: Added _OSI(Processor Device)
[ 0.471844] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.471845] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.476382] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.480657] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.481064] ACPI: Dynamic OEM Table Load:
[ 0.481073] ACPI: SSDT 0xFFFF880133493C00 0003F0 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.481813] ACPI: Dynamic OEM Table Load:
[ 0.481821] ACPI: SSDT 0xFFFF8801329E1000 000891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.482877] ACPI: Dynamic OEM Table Load:
[ 0.482884] ACPI: SSDT 0xFFFF880133494400 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.483615] ACPI: Dynamic OEM Table Load:
[ 0.483621] ACPI: SSDT 0xFFFF880132A08400 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.484395] ACPI : EC: EC started
[ 0.486702] ACPI: Interpreter enabled
[ 0.486714] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S1_] (20150410/hwxface-580)
[ 0.486721] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S2_] (20150410/hwxface-580)
[ 0.486745] ACPI: (supports S0 S3 S4 S5)
[ 0.486747] ACPI: Using IOAPIC for interrupt routing
[ 0.486782] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.894267] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.894274] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.894310] _SB_.PCI0:_OSC invalid UUID
[ 0.894312] _OSC request data:1 1f 0
[ 0.894316] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.894803] PCI host bridge to bus 0000:00
[ 0.894806] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.894809] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.894811] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.894813] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.894815] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[ 0.894824] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.894846] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.894975] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[ 0.894987] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[ 0.894993] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.894998] pci 0000:00:02.0: reg 0x20: [io 0x3050-0x3057]
[ 0.895188] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.895217] pci 0000:00:16.0: reg 0x10: [mem 0xd4406100-0xd440610f 64bit]
[ 0.895307] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.895451] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.895815] pci 0000:00:1a.0: reg 0x10: [mem 0xd4405c00-0xd4405fff]
[ 0.897895] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.898035] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.898059] pci 0000:00:1b.0: reg 0x10: [mem 0xd4400000-0xd4403fff 64bit]
[ 0.898160] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.898255] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.898299] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.898393] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.898489] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.898536] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.898629] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.898773] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.899133] pci 0000:00:1d.0: reg 0x10: [mem 0xd4405800-0xd4405bff]
[ 0.901212] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.901318] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.901363] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.901516] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.901558] pci 0000:00:1f.0: [8086:3b09] type 00 class 0x060100
[ 0.901783] pci 0000:00:1f.2: [8086:3b29] type 00 class 0x010601
[ 0.901806] pci 0000:00:1f.2: reg 0x10: [io 0x3048-0x304f]
[ 0.901817] pci 0000:00:1f.2: reg 0x14: [io 0x305c-0x305f]
[ 0.901829] pci 0000:00:1f.2: reg 0x18: [io 0x3040-0x3047]
[ 0.901840] pci 0000:00:1f.2: reg 0x1c: [io 0x3058-0x305b]
[ 0.901851] pci 0000:00:1f.2: reg 0x20: [io 0x3020-0x303f]
[ 0.901867] pci 0000:00:1f.2: reg 0x24: [mem 0xd4405000-0xd44057ff]
[ 0.901923] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.902049] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[ 0.902072] pci 0000:00:1f.3: reg 0x10: [mem 0xd4406000-0xd44060ff 64bit]
[ 0.902102] pci 0000:00:1f.3: reg 0x20: [io 0x3000-0x301f]
[ 0.902257] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.902283] pci 0000:00:1f.6: reg 0x10: [mem 0xd4404000-0xd4404fff 64bit]
[ 0.902591] pci 0000:01:00.0: [14e4:1692] type 00 class 0x020000
[ 0.902640] pci 0000:01:00.0: reg 0x10: [mem 0xd3400000-0xd340ffff 64bit]
[ 0.902875] pci 0000:01:00.0: PME# supported from D3hot D3cold
[ 0.904928] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.904938] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.904948] pci 0000:00:1c.0: bridge window [mem 0xd3400000-0xd43fffff]
[ 0.904956] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 0.905033] pci 0000:02:00.0: [168c:0032] type 00 class 0x028000
[ 0.905071] pci 0000:02:00.0: reg 0x10: [mem 0xd2400000-0xd247ffff 64bit]
[ 0.905140] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.905226] pci 0000:02:00.0: supports D1 D2
[ 0.905228] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.906896] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.906905] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 0.906914] pci 0000:00:1c.1: bridge window [mem 0xd2400000-0xd33fffff]
[ 0.906926] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 0.907015] pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
[ 0.907029] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.907031] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.907033] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.907035] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff window] (subtractive decode)
[ 1.109424] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.109478] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.109531] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.109587] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 1.109639] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 1.109692] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.109744] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 1.109802] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 1.109824] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 1.109828] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.109833] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 1.109877] PCI host bridge to bus 0000:ff
[ 1.109880] pci_bus 0000:ff: root bus resource [bus ff]
[ 1.109885] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 1.109936] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 1.109989] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 1.110035] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 1.110081] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 1.110126] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 1.110230] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 1.110282] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 1.110392] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 1.110395] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.110398] vgaarb: loaded
[ 1.110399] vgaarb: bridge control possible 0000:00:02.0
[ 1.110615] SCSI subsystem initialized
[ 1.110676] libata version 3.00 loaded.
[ 1.110809] PCI: Using ACPI for IRQ routing
[ 1.120758] PCI: pci_cache_line_size set to 64 bytes
[ 1.120854] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 1.120856] e820: reserve RAM buffer [mem 0xb3681000-0xb3ffffff]
[ 1.120858] e820: reserve RAM buffer [mem 0xb3736000-0xb3ffffff]
[ 1.120859] e820: reserve RAM buffer [mem 0xb37de000-0xb3ffffff]
[ 1.120861] e820: reserve RAM buffer [mem 0xb3800000-0xb3ffffff]
[ 1.120994] NetLabel: Initializing
[ 1.120996] NetLabel: domain hash size = 128
[ 1.120997] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.121012] NetLabel: unlabeled traffic allowed by default
[ 1.121065] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.121071] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.123105] Switched to clocksource hpet
[ 1.130271] pnp: PnP ACPI init
[ 1.331328] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 13 [io 0x1000-0x1fff]
[ 1.331380] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.331383] system 00:00: [io 0xff2c-0xff2f] has been reserved
[ 1.331385] system 00:00: [io 0x0800-0x080f] has been reserved
[ 1.331387] system 00:00: [io 0xffff] has been reserved
[ 1.331389] system 00:00: [io 0xffff] has been reserved
[ 1.331392] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 1.331394] system 00:00: [io 0x0500-0x057f] has been reserved
[ 1.331399] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.331435] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.331479] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 1.331528] pnp 00:03: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active)
[ 1.331834] system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.331837] system 00:04: [mem 0xfed10000-0xfed13fff] has been reserved
[ 1.331839] system 00:04: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.331841] system 00:04: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.331843] system 00:04: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.331845] system 00:04: [mem 0xd4500000-0xd4500fff] has been reserved
[ 1.331847] system 00:04: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.331849] system 00:04: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.331852] system 00:04: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.331854] system 00:04: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.331858] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.331972] pnp: PnP ACPI: found 5 devices
[ 1.338676] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.338686] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 1.338720] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.338725] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 1.338731] pci 0000:00:1c.0: bridge window [mem 0xd3400000-0xd43fffff]
[ 1.338737] pci 0000:00:1c.0: bridge window [mem 0xd0400000-0xd13fffff 64bit pref]
[ 1.338747] pci 0000:02:00.0: BAR 6: assigned [mem 0xd2480000-0xd248ffff pref]
[ 1.338750] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 1.338753] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff]
[ 1.338759] pci 0000:00:1c.1: bridge window [mem 0xd2400000-0xd33fffff]
[ 1.338764] pci 0000:00:1c.1: bridge window [mem 0xd1400000-0xd23fffff 64bit pref]
[ 1.338772] pci 0000:00:1e.0: PCI bridge to [bus 03]
[ 1.338788] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.338790] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.338792] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.338794] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 1.338796] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 1.338798] pci_bus 0000:01: resource 1 [mem 0xd3400000-0xd43fffff]
[ 1.338800] pci_bus 0000:01: resource 2 [mem 0xd0400000-0xd13fffff 64bit pref]
[ 1.338802] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 1.338804] pci_bus 0000:02: resource 1 [mem 0xd2400000-0xd33fffff]
[ 1.338806] pci_bus 0000:02: resource 2 [mem 0xd1400000-0xd23fffff 64bit pref]
[ 1.338808] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7 window]
[ 1.338810] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff window]
[ 1.338812] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.338814] pci_bus 0000:03: resource 7 [mem 0xc0000000-0xfebfffff window]
[ 1.338852] NET: Registered protocol family 2
[ 1.339084] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.339205] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.339349] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.339386] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.339409] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.339477] NET: Registered protocol family 1
[ 1.339496] pci 0000:00:02.0: Video device with shadowed ROM
[ 1.361409] PCI: CLS 64 bytes, default 64
[ 1.361470] Trying to unpack rootfs image as initramfs...
[ 1.472158] Freeing initrd memory: 8920K (ffff88003773a000 - ffff880037ff0000)
[ 1.472200] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.472203] software IO TLB [mem 0xaf681000-0xb3681000] (64MB) mapped at [ffff8800af681000-ffff8800b3680fff]
[ 1.472270] Simple Boot Flag at 0x44 set to 0x1
[ 1.472737] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.472801] audit: initializing netlink subsys (disabled)
[ 1.472821] audit: type=2000 audit(1461076261.199:1): initialized
[ 1.473229] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.474823] zpool: loaded
[ 1.474826] zbud: loaded
[ 1.475002] VFS: Disk quotas dquot_6.6.0
[ 1.475046] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.475733] bounce: pool size: 64 pages
[ 1.475771] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.475806] io scheduler noop registered
[ 1.475809] io scheduler deadline registered
[ 1.475843] io scheduler cfq registered (default)
[ 1.476310] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.476327] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.476375] vesafb: mode is 800x600x16, linelength=1600, pages=135
[ 1.476377] vesafb: scrolling: redraw
[ 1.476379] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 1.476396] vesafb: framebuffer at 0xc0000000, mapped to 0xffffc90000800000, using 1875k, total 131008k
[ 1.515366] Console: switching to colour frame buffer device 100x37
[ 1.553998] fb0: VESA VGA frame buffer device
[ 1.554017] intel_idle: MWAIT substates: 0x120
[ 1.554019] intel_idle: v0.4 model 0x25
[ 1.554020] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.554129] GHES: HEST is not enabled!
[ 1.554204] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.554668] Linux agpgart interface v0.103
[ 1.554733] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[ 1.554753] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.555149] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 1.555313] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 1.557652] brd: module loaded
[ 1.557838] ahci 0000:00:1f.2: version 3.0
[ 1.558051] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.558090] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 1.558093] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems apst
[ 1.559652] scsi host0: ahci
[ 1.559780] scsi host1: ahci
[ 1.559914] scsi host2: ahci
[ 1.560014] scsi host3: ahci
[ 1.560058] ata1: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405100 irq 24
[ 1.560061] ata2: SATA max UDMA/133 abar m2048@0xd4405000 port 0xd4405180 irq 24
[ 1.560062] ata3: DUMMY
[ 1.560063] ata4: DUMMY
[ 1.560152] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.574362] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.574367] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.574533] mousedev: PS/2 mouse device common for all mice
[ 1.576270] rtc_cmos 00:01: RTC can wake from S4
[ 1.576433] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.576468] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 1.576494] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.576640] Key type dns_resolver registered
[ 1.576643] mpls_gso: MPLS GSO support
[ 1.576969] registered taskstats version 1
[ 1.577471] Btrfs loaded
[ 1.577880] Magic number: 12:377:536
[ 1.577888] bdi 1:14: hash matches
[ 1.577995] rtc_cmos 00:01: setting system clock to 2016-04-19 14:31:02 UTC (1461076262)
[ 1.578041] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[ 1.578138] PM: Checking hibernation image partition UUID=a1661c85-cc19-4105-8dfb-4d27259402a6
[ 1.593705] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.866480] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.917124] ata1.00: ATA-8: ST9500325AS, 0001SDM1, max UDMA/133
[ 1.917130] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.919122] ata1.00: configured for UDMA/133
[ 1.919351] scsi 0:0:0:0: Direct-Access ATA ST9500325AS SDM1 PQ: 0 ANSI: 5
[ 1.919909] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.919950] sd 0:0:0:0: [sda] Write Protect is off
[ 1.919953] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.919969] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.962607] sda: sda1 sda2 < sda5 sda6 >
[ 1.963651] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.224632] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.228006] ata2.00: ATAPI: Slimtype DVD A DS8A8SH, KA14, max UDMA/100
[ 2.228985] ata2.00: configured for UDMA/100
[ 2.236855] scsi 1:0:0:0: CD-ROM Slimtype DVD A DS8A8SH KA14 PQ: 0 ANSI: 5
[ 2.472717] tsc: Refined TSC clocksource calibration: 2261.391 MHz
[ 2.472724] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x2098bcacd1a, max_idle_ns: 440795311585 ns
[ 2.623161] psmouse serio1: elantech: assuming hardware version 2 (with firmware version 0x040213)
[ 2.679539] psmouse serio1: elantech: Synaptics capabilities query result 0x68, 0x18, 0x0c.
[ 2.980918] psmouse serio1: elantech: retrying ps2 command 0xe6 (2).
[ 3.473214] Switched to clocksource tsc
[ 3.491505] psmouse serio1: elantech: retrying ps2 command 0xf8 (2).
[ 4.192390] psmouse serio1: elantech: retrying ps2 command 0xf8 (1).
[ 4.809226] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input2
[ 4.815328] PM: Hibernation image not present or could not be loaded.
[ 4.815861] Freeing unused kernel memory: 1340K (ffffffff81d28000 - ffffffff81e77000)
[ 4.815864] Write protecting the kernel read-only data: 12288k
[ 4.816290] Freeing unused kernel memory: 1052K (ffff8800016f9000 - ffff880001800000)
[ 4.816570] Freeing unused kernel memory: 668K (ffff880001b59000 - ffff880001c00000)
[ 4.868338] dracut: dracut-038
[ 4.996749] random: systemd-udevd urandom read with 37 bits of entropy available
[ 5.038921] [drm] Initialized drm 1.1.0 20060810
[ 5.048456] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/PNP0C0C:00/input/input3
[ 5.048464] ACPI: Power Button [PWRB]
[ 5.048525] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/PNP0C0D:00/input/input4
[ 5.049005] ACPI: Lid Switch [LID0]
[ 5.049059] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:10/PNP0C0E:00/input/input5
[ 5.049062] ACPI: Sleep Button [SLPB]
[ 5.049127] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 5.049130] ACPI: Power Button [PWRF]
[ 5.102281] [drm] Memory usable by graphics device = 2048M
[ 5.102291] checking generic (c0000000 7ff0000) vs hw (c0000000 10000000)
[ 5.102295] fb: switching to inteldrmfb from VESA VGA
[ 5.102342] Console: switching to colour dummy device 80x25
[ 5.102476] [drm] Replacing VGA console driver
[ 5.110962] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 5.110964] [drm] Driver supports precise vblank timestamp query.
[ 5.111208] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 5.128910] ACPI: Video Device [GFX0] (multi-head: yes rom: yes post: no)
[ 5.139867] fbcon: inteldrmfb (fb0) is primary device
[ 5.848877] Console: switching to colour frame buffer device 170x48
[ 5.852233] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 5.852235] i915 0000:00:02.0: registered panic notifier
[ 5.953227] acpi device:03: registered as cooling_device0
[ 5.953789] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 5.953835] [drm] Initialized i915 1.6.0 20150327 for 0000:00:02.0 on minor 0
[ 5.958384] dracut: Starting plymouth daemon
[ 7.099474] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 7.099480] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.099623] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 7.106086] ACPI: bus type USB registered
[ 7.106121] usbcore: registered new interface driver usbfs
[ 7.106131] usbcore: registered new interface driver hub
[ 7.106158] usbcore: registered new device driver usb
[ 7.117945] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.118834] ehci-pci: EHCI PCI platform driver
[ 7.119044] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 7.119055] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 7.119071] ehci-pci 0000:00:1a.0: debug port 2
[ 7.123008] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 7.123034] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4405c00
[ 7.129580] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 7.129697] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.129700] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.129702] usb usb1: Product: EHCI Host Controller
[ 7.129704] usb usb1: Manufacturer: Linux 4.1.15-desktop-2.mga5 ehci_hcd
[ 7.129705] usb usb1: SerialNumber: 0000:00:1a.0
[ 7.130059] hub 1-0:1.0: USB hub found
[ 7.130078] hub 1-0:1.0: 2 ports detected
[ 7.130328] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 7.130334] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 7.130348] ehci-pci 0000:00:1d.0: debug port 2
[ 7.134263] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 7.134278] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd4405800
[ 7.139578] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 7.139711] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 7.139717] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 7.139722] usb usb2: Product: EHCI Host Controller
[ 7.139726] usb usb2: Manufacturer: Linux 4.1.15-desktop-2.mga5 ehci_hcd
[ 7.139734] usb usb2: SerialNumber: 0000:00:1d.0
[ 7.139864] hub 2-0:1.0: USB hub found
[ 7.139870] hub 2-0:1.0: 2 ports detected
[ 7.431674] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 7.441641] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 7.460123] random: nonblocking pool is initialized
[ 7.546165] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 7.546172] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.546625] hub 1-1:1.0: USB hub found
[ 7.546763] hub 1-1:1.0: 6 ports detected
[ 7.556186] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 7.556194] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 7.556607] hub 2-1:1.0: USB hub found
[ 7.556786] hub 2-1:1.0: 8 ports detected
[ 7.821845] usb 1-1.1: new high-speed USB device number 3 using ehci-pci
[ 8.006360] usb 1-1.1: New USB device found, idVendor=0402, idProduct=7675
[ 8.006367] usb 1-1.1: New USB device strings: Mfr=3, Product=1, SerialNumber=0
[ 8.006372] usb 1-1.1: Product: WebCam
[ 8.006376] usb 1-1.1: Manufacturer: Y2C5F028M
[ 8.087948] usb 1-1.2: new high-speed USB device number 4 using ehci-pci
[ 8.113489] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 8.113493] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
[ 8.113497] PM: Marking nosave pages: [mem 0xb3681000-0xb36befff]
[ 8.113499] PM: Marking nosave pages: [mem 0xb3736000-0xb37befff]
[ 8.113503] PM: Marking nosave pages: [mem 0xb37de000-0xb37fefff]
[ 8.113504] PM: Marking nosave pages: [mem 0xb3800000-0xffffffff]
[ 8.114497] PM: Basic memory bitmaps created
[ 8.115287] PM: Basic memory bitmaps freed
[ 8.115294] video LNXVIDEO:00: Restoring backlight state
[ 8.118439] PM: Starting manual resume from disk
[ 8.118445] PM: Hibernation image partition 8:5 present
[ 8.118446] PM: Looking for hibernation image.
[ 8.173971] PM: Image not found (code -22)
[ 8.173976] PM: Hibernation image not present or could not be loaded.
[ 8.328959] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.428920] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0138
[ 8.428928] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.428934] usb 1-1.2: Product: USB2.0-CRW
[ 8.428938] usb 1-1.2: Manufacturer: Generic
[ 8.428942] usb 1-1.2: SerialNumber: 20090516388200000
[ 8.439845] usbcore: registered new interface driver usb-storage
[ 8.441432] usbcore: registered new interface driver uas
[ 8.443374] ums-realtek 1-1.2:1.0: USB Mass Storage device detected
[ 8.455906] dracut: Checking ext4: /dev/disk/by-uuid/26c3a100-5cd4-476d-afcd-a6c3ae6ba91b
[ 8.456088] dracut: issuing e2fsck -a /dev/disk/by-uuid/26c3a100-5cd4-476d-afcd-a6c3ae6ba91b
[ 8.462411] scsi host4: usb-storage 1-1.2:1.0
[ 8.462598] usbcore: registered new interface driver ums-realtek
[ 8.584685] dracut: /dev/disk/by-uuid/26c3a100-5cd4-476d-afcd-a6c3ae6ba91b: clean, 160438/3301376 files, 1691557/13183084 blocks
[ 8.586661] dracut: Mounting /dev/disk/by-uuid/26c3a100-5cd4-476d-afcd-a6c3ae6ba91b with -o noatime,acl
[ 8.661245] usb 1-1.2: USB disconnect, device number 4
[ 8.704477] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl
[ 8.863485] dracut: Mounted root filesystem /dev/sda1
[ 9.210979] dracut: Switching root
[ 9.292018] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 9.947081] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.
[ 10.440723] NET: Registered protocol family 10
[ 12.201474] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 12.985599] EXT4-fs (sda1): re-mounted. Opts: acl
[ 14.046475] Non-volatile memory driver v1.3
[ 15.718837] wmi: Mapper loaded
[ 15.998623] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 16.040797] intel ips 0000:00:1f.6: No CPUID match found.
[ 16.040802] intel ips 0000:00:1f.6: IPS not supported on this CPU
[ 16.095831] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (PMIO) (20150410/utaddress-254)
[ 16.095840] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.095844] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (GPIO) (20150410/utaddress-254)
[ 16.095848] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.095849] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (GPIO) (20150410/utaddress-254)
[ 16.095853] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (_SB_.PCI0.GPIO) (20150410/utaddress-254)
[ 16.095857] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.095858] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (GPIO) (20150410/utaddress-254)
[ 16.095861] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000053F (_SB_.PCI0.GPIO) (20150410/utaddress-254)
[ 16.095865] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.095866] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 16.171428] ACPI Warning: SystemIO range 0x0000000000003000-0x000000000000301F conflicts with OpRegion 0x0000000000003000-0x000000000000300F (_SB_.PCI0.SBUS.SMBI) (20150410/utaddress-254)
[ 16.171437] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.358448] pps_core: LinuxPPS API ver. 1 registered
[ 16.358452] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 16.360055] PTP clock support registered
[ 16.446206] tg3.c:v3.137 (May 11, 2014)
[ 16.559218] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 16.684258] libphy: tg3 mdio bus: probed
[ 16.717520] cfg80211: Calling CRDA to update world regulatory domain
[ 16.742434] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM57780) rev 57780001] (PCI Express) MAC address dc:0e:a1:b3:82:1a
[ 16.742438] tg3 0000:01:00.0 eth0: attached PHY driver [Broadcom BCM57780] (mii_bus:phy_addr=100:01)
[ 16.742440] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 16.742442] tg3 0000:01:00.0 eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 16.912225] microcode: CPU0 sig=0x20655, pf=0x10, revision=0x2
[ 16.912683] microcode: CPU0 updated to revision 0x4, date = 2013-06-28
[ 16.912695] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 16.912721] microcode: CPU1 sig=0x20655, pf=0x10, revision=0x2
[ 16.912921] microcode: CPU1 updated to revision 0x4, date = 2013-06-28
[ 16.913020] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 17.128999] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC272X: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 17.129004] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 17.129007] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 17.129009] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 17.129010] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 17.129013] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 17.129015] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 17.137239] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 17.137417] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 17.137472] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 17.197905] ath: phy0: timeout (1000 us) on reg 0x15f18: 0x00000000 & 0x00000007 != 0x00000004
[ 17.199430] ath: phy0: Enable LNA combining
[ 17.200664] ath: phy0: ASPM enabled: 0x43
[ 17.200667] ath: EEPROM regdomain: 0x65
[ 17.200668] ath: EEPROM indicates we should expect a direct regpair map
[ 17.200671] ath: Country alpha2 being used: 00
[ 17.200672] ath: Regpair used: 0x65
[ 17.226998] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 17.227262] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90000900000, irq=17
[ 17.287918] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 17.287937] acer_wmi: Function bitmap for Communication Button: 0x1
[ 17.287942] acer_wmi: Brightness must be controlled by acpi video driver
[ 17.288465] input: Acer WMI hotkeys as /devices/virtual/input/input11
[ 17.288744] input: Acer BMA150 accelerometer as /devices/virtual/input/input12
[ 17.359715] ACPI: Battery Slot [BAT0] (battery present)
[ 17.368066] iTCO_vendor_support: vendor-support=0
[ 17.373287] media: Linux media interface: v0.10
[ 17.412959] Linux video capture interface: v2.00
[ 17.542899] tg3 0000:01:00.0 enp1s0: renamed from eth0
[ 17.720797] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 17.720857] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
[ 17.720962] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
[ 17.746372] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 17.778940] uvcvideo: Found UVC 1.00 device WebCam (0402:7675)
[ 17.781684] input: WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input13
[ 17.781753] usbcore: registered new interface driver uvcvideo
[ 17.781754] USB Video Class driver (1.1.1)
[ 17.860974] ACPI: AC Adapter [AC] (off-line)
[ 17.862459] systemd-journald[436]: Received request to flush runtime journal from PID 1
[ 19.162877] cfg80211: Calling CRDA to update world regulatory domain
[ 19.562994] cfg80211: World regulatory domain updated:
[ 19.563001] cfg80211: DFS Master region: unset
[ 19.563002] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 19.563005] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.563007] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.563009] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.563011] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 19.563013] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 19.563015] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 19.563017] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.563019] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 19.563247] cfg80211: Calling CRDA for country: FR
[ 19.870466] cfg80211: Regulatory domain changed to country: FR
[ 19.870471] cfg80211: DFS Master region: ETSI
[ 19.870472] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 19.870475] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 19.870477] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 19.870480] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 19.870481] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[ 19.870483] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 19.990450] Adding 4191344k swap on /dev/sda5. Priority:-1 extents:1 across:4191344k FS
[ 21.680556] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
[ 32.120974] IPv6: ADDRCONF(NETDEV_UP): enp1s0: link is not ready
[ 32.203475] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 32.254598] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 32.482495] NET: Registered protocol family 17
[ 32.750564] tg3 0000:01:00.0 enp1s0: Link is down
[ 37.967431] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 38.372258] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 40.538638] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 40.606242] Netfilter messages via NETLINK v0.30.
[ 40.608811] ctnetlink v0.93: registering with nfnetlink.
[ 40.818087] xt_CT: No such helper "snmp"
[ 40.823632] xt_CT: No such helper "netbios-ns"
[ 40.846470] xt_CT: No such helper "pptp"
[ 40.863925] xt_CT: No such helper "irc"
[ 40.868842] xt_CT: No such helper "irc-0"
[ 41.051855] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 41.242281] xt_addrtype: ipv6 does not support BROADCAST matching
[ 44.203338] ip_set: protocol 6
[ 44.305279] netfilter PSD loaded - (c) astaro AG
[ 44.316045] IFWLOG: register target
[ 107.969947] usb 2-1.3: new high-speed USB device number 3 using ehci-pci
[ 108.056482] usb 2-1.3: New USB device found, idVendor=04cb, idProduct=019b
[ 108.056489] usb 2-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=3
[ 108.056495] usb 2-1.3: Product: USB PTP Camera
[ 108.056499] usb 2-1.3: SerialNumber: 592D31313030060905819330112B77
[ 138.954896] usb 2-1.3: USB disconnect, device number 3


Ici, deuxième essai en connectant l'appareil :


[ch@localhost ~]$ dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.15-desktop-2.mga5 (iurt@sucuk.mageia.org) (gcc version 4.9.2 (GCC) ) #1 SMP Wed Jan 20 17:05:51 UTC 2016
[ 0.000000] Command line: BOOT_IMAGE=linux root=UUID=26c3a100-5cd4-476d-afcd-a6c3ae6ba91b splash quiet noiswmd resume=UUID=a1661c85-cc19-4105-8dfb-4d27259402a6 vga=788
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b3680fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b3681000-0x00000000b36befff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b36bf000-0x00000000b3735fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b3736000-0x00000000b37befff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b37bf000-0x00000000b37ddfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b37de000-0x00000000b37fefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b37ff000-0x00000000b37fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b3800000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1b000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.6 present.
[ 0.000000] DMI: Acer Aspire 5733Z/Aspire 5733Z, BIOS V1.08 03/21/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 4 base 0B4000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0B3800000 mask FFF800000 uncachable
[ 0.000000] 6 base 100000000 mask FC0000000 write-back
[ 0.000000] 7 base 138000000 mask FF8000000 uncachable
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: last_pfn = 0xb3800 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01f4b000, 0x01f4bfff] PGTABLE
[ 0.000000] BRK [0x01f4c000, 0x01f4cfff] PGTABLE
[ 0.000000] BRK [0x01f4d000, 0x01f4dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x137e00000-0x137ffffff]
[ 0.000000] [mem 0x137e00000-0x137ffffff] page 2M
[ 0.000000] BRK [0x01f4e000, 0x01f4efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x137dfffff]
[ 0.000000] [mem 0x120000000-0x137dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[ 0.000000] [mem 0x100000000-0x11fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xb3680fff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xb35fffff] page 2M
[ 0.000000] [mem 0xb3600000-0xb3680fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb36bf000-0xb3735fff]
[ 0.000000] [mem 0xb36bf000-0xb3735fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb37bf000-0xb37ddfff]
[ 0.000000] [mem 0xb37bf000-0xb37ddfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb37ff000-0xb37fffff]
[ 0.000000] [mem 0xb37ff000-0xb37fffff] page 4k
[ 0.000000] RAMDISK: [mem 0x3773a000-0x37feffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x00000000B37FE120 00007C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0x00000000B37FC000 0000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: DSDT 0x00000000B37E9000 00F21B (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: FACS 0x00000000B375A000 000040
[ 0.000000] ACPI: FACS 0x00000000B375A000 000040
[ 0.000000] ACPI: ASF! 0x00000000B37FD000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: HPET 0x00000000B37FB000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: APIC 0x00000000B37FA000 00008C (v02 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: MCFG 0x00000000B37F9000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SLIC 0x00000000B37E8000 000176 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: BOOT 0x00000000B37E5000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: ASPT 0x00000000B37E1000 000034 (v04 ACRSYS ACRPRDCT 00000001 1025 01000013)
[ 0.000000] ACPI: SSDT 0x00000000B37E0000 0009F1 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000B37DF000 000259 (v01 PmRef Cpu0Tst 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000B37DE000 00049F (v01 PmRef ApTst 00003000 INTL

Édité par totof Le 22/04/2016 à 03h00

Ton fuji est en mode PTP .... !

mais voie là : http://www.linuxquestions.org/questions/linux-hardware-18/fuji-finepix-f30-doesn%27t-work-612826/

Édité par m@rco123 Le 22/04/2016 à 09h02

bonjour,
je tiens à m'excuser pour mon absence sur ce post. Certes, je ne suis jamais bien rapide, n'ayant pas internet chez moi mais il se trouve qu'entre mon dernier post et celui-ci, mon ordi a rendu l'âme. C'est d'ailleurs clairement de l'obsolescence programmée mais bon, c'est notre condition d'humain réduit à la consommation industrielle.
Bref, je viens de réinstaller Mageia sur mon nouvel ordi et je vais retenter de brancher mon apn. Je suppose que le problème sera là, donc j'essayerai d'appliquer la solution en anglais que tu m'indiques, Marco.
A tout bientôt donc!

Bonjour,
alors je m'y recolle. J'ai essayé de lancer digikam en root et là, je me retrouve avec ça :



Je pense que j'ai dû mal m'y prendre, non?