Forum

j'ouvres un nouveau fil pour ne pas se mélanger avec le prédédent.



Mon système met près de 3 minutes à démarrer, alors qu'il s'éteind en à peine 10 secondes.



cela ne m'a jamais vraiment dérangé, car j'allume le PC, et je commence en général à m'en servir 10 15 minutes plus tard.

mais puisqu'on en parle, voila le résultat des commandes:







j'ai quand même 1min 21.520s pour mandriva-everytime.service



j'ai rajoutté des lignes dans mandriva-everytime.servicepour voir ce qui prends du temps, et j'ai



dkms 30s









et harddrake 51s











impossible justement de faire echap.

l'écran reste sur mageia.



quand j'arrive enfin à voir les lignes défiler, tout est normal, après les 2 bonnes minutes d'attente.



je pense à une détection hardware qui bloque un certain temps.....



j'efface systématiquement les vieux noyaux

Édité par daniel-51 Le 30/04/2015 à 13h36

Salut,

que renvoie la commande



après un démarrage ?

voila



<span class="formatter-hide">Caché:</span><div class="hide" onclick="bb_hide(this)"><div class="hide2">$ dmesg

[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Initializing cgroup subsys cpuacct

[ 0.000000] Linux version 3.14.32-desktop-1.mga4 (iurt@rabbit.mageia.org) (gcc version 4.8.2 (GCC) ) #1 SMP Sat Feb 7 00:41:35 UTC 2015

[ 0.000000] Command line: BOOT_IMAGE=linux root=UUID=62ad7fa3-7961-4a4f-9e9b-21edb645f909 splash quiet nokmsboot resume=UUID=a40f3411-6ad7-4786-9e79-43dfbfe0c35d vga=788

[ 0.000000] e820: BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable

[ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000000e4000-0x00000000000fffff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf76ffff] usable

[ 0.000000] BIOS-e820: [mem 0x00000000bf770000-0x00000000bf787fff] ACPI data

[ 0.000000] BIOS-e820: [mem 0x00000000bf788000-0x00000000bf7dbfff] ACPI NVS

[ 0.000000] BIOS-e820: [mem 0x00000000bf7dc000-0x00000000bfffffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] SMBIOS 2.6 present.

[ 0.000000] DMI: System manufacturer System Product Name/P7P55D LE, BIOS 0502 09/09/2009

[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved

[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[ 0.000000] No AGP bridge found

[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000

[ 0.000000] MTRR default type: uncachable

[ 0.000000] MTRR fixed ranges enabled:

[ 0.000000] 00000-9FFFF write-back

[ 0.000000] A0000-BFFFF uncachable

[ 0.000000] C0000-CFFFF write-protect

[ 0.000000] D0000-DFFFF uncachable

[ 0.000000] E0000-E7FFF write-through

[ 0.000000] E8000-FFFFF write-protect

[ 0.000000] MTRR variable ranges enabled:

[ 0.000000] 0 base 000000000 mask F00000000 write-back

[ 0.000000] 1 base 100000000 mask FC0000000 write-back

[ 0.000000] 2 base 0C0000000 mask FC0000000 uncachable

[ 0.000000] 3 base 0FFFE0000 mask FFFFF0000 write-protect

[ 0.000000] 4 disabled

[ 0.000000] 5 disabled

[ 0.000000] 6 disabled

[ 0.000000] 7 disabled

[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[ 0.000000] e820: last_pfn = 0xbf770 max_arch_pfn = 0x400000000

[ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] mapped at [ffff8800000ff780]

[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576

[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]

[ 0.000000] [mem 0x00000000-0x000fffff] page 4k

[ 0.000000] BRK [0x01f0b000, 0x01f0bfff] PGTABLE

[ 0.000000] BRK [0x01f0c000, 0x01f0cfff] PGTABLE

[ 0.000000] BRK [0x01f0d000, 0x01f0dfff] PGTABLE

[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]

[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M

[ 0.000000] BRK [0x01f0e000, 0x01f0efff] PGTABLE

[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]

[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M

[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]

[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M

[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf76ffff]

[ 0.000000] [mem 0x00100000-0x001fffff] page 4k

[ 0.000000] [mem 0x00200000-0xbf5fffff] page 2M

[ 0.000000] [mem 0xbf600000-0xbf76ffff] page 4k

[ 0.000000] RAMDISK: [mem 0x37817000-0x37feffff]

[ 0.000000] ACPI: RSDP 00000000000fb9f0 000014 (v00 ACPIAM)

[ 0.000000] ACPI: RSDT 00000000bf770000 00003C (v01 090909 RSDT1522 20090909 MSFT 00000097)

[ 0.000000] ACPI: FACP 00000000bf770200 000084 (v01 090909 FACP1522 20090909 MSFT 00000097)

[ 0.000000] ACPI: DSDT 00000000bf7704a0 00D408 (v01 A1380 A1380001 00000001 INTL 20060113)

[ 0.000000] ACPI: FACS 00000000bf788000 000040

[ 0.000000] ACPI: APIC 00000000bf770390 0000CC (v01 090909 APIC1522 20090909 MSFT 00000097)

[ 0.000000] ACPI: MCFG 00000000bf770460 00003C (v01 090909 OEMMCFG 20090909 MSFT 00000097)

[ 0.000000] ACPI: OEMB 00000000bf788040 000072 (v01 090909 OEMB1522 20090909 MSFT 00000097)

[ 0.000000] ACPI: HPET 00000000bf77f4a0 000038 (v01 090909 OEMHPET 20090909 MSFT 00000097)

[ 0.000000] ACPI: SSDT 00000000bf7891f0 000363 (v01 DpgPmm CpuPm 00000012 INTL 20060113)

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] No NUMA configuration found

[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]

[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]

[ 0.000000] NODE_DATA [mem 0x13fff8000-0x13fffcfff]

[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013b600000-ffff88013f5fffff] on node 0

[ 0.000000] Zone ranges:

[ 0.000000] DMA [mem 0x00001000-0x00ffffff]

[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]

[ 0.000000] Normal [mem 0x100000000-0x13fffffff]

[ 0.000000] Movable zone start for each node

[ 0.000000] Early memory node ranges

[ 0.000000] node 0: [mem 0x00001000-0x0009efff]

[ 0.000000] node 0: [mem 0x00100000-0xbf76ffff]

[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]

[ 0.000000] On node 0 totalpages: 1046286

[ 0.000000] DMA zone: 64 pages used for memmap

[ 0.000000] DMA zone: 21 pages reserved

[ 0.000000] DMA zone: 3998 pages, LIFO batch:0

[ 0.000000] DMA32 zone: 12190 pages used for memmap

[ 0.000000] DMA32 zone: 780144 pages, LIFO batch:31

[ 0.000000] Normal zone: 4096 pages used for memmap

[ 0.000000] Normal zone: 262144 pages, LIFO batch:31

[ 0.000000] ACPI: PM-Timer IO Port: 0x808

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x84] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x85] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x86] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x87] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x88] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x89] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x8a] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x8b] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled)

[ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000

[ 0.000000] smpboot: Allowing 16 CPUs, 12 hotplug CPUs

[ 0.000000] nr_irqs_gsi: 40

[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]

[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000e3fff]

[ 0.000000] PM: Registered nosave memory: [mem 0x000e4000-0x000fffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xbf770000-0xbf787fff]

[ 0.000000] PM: Registered nosave memory: [mem 0xbf788000-0xbf7dbfff]

[ 0.000000] PM: Registered nosave memory: [mem 0xbf7dc000-0xbfffffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]

[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]

[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]

[ 0.000000] e820: [mem 0xc0000000-0xfedfffff] available for PCI devices

[ 0.000000] Booting paravirtualized kernel on bare hardware

[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:16 nr_node_ids:1

[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s80704 r8192 d21696 u131072

[ 0.000000] pcpu-alloc: s80704 r8192 d21696 u131072 alloc=1*2097152

[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15

[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1029915

[ 0.000000] Policy zone: Normal

[ 0.000000] Kernel command line: BOOT_IMAGE=linux root=UUID=62ad7fa3-7961-4a4f-9e9b-21edb645f909 splash quiet nokmsboot resume=UUID=a40f3411-6ad7-4786-9e79-43dfbfe0c35d vga=788

[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[ 0.000000] Checking aperture...

[ 0.000000] No AGP bridge found

[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area

[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!

[ 0.000000] Memory: 4028000K/4185144K available (6434K kernel code, 888K rwdata, 3080K rodata, 1252K init, 936K bss, 157144K reserved)

[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1

[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=16.

[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16

[ 0.000000] NR_IRQS:4352 nr_irqs:808 16

[ 0.000000] Console: colour dummy device 80x25

[ 0.000000] console [tty0] enabled

[ 0.000000] hpet clockevent registered

[ 0.000000] tsc: Fast TSC calibration using PIT

[ 0.000000] tsc: Detected 2674.748 MHz processor

[ 0.000030] Calibrating delay loop (skipped), value calculated using timer frequency.. 5349.49 BogoMIPS (lpj=2674748)

[ 0.000032] pid_max: default: 32768 minimum: 301

[ 0.000039] ACPI: Core revision 20131218

[ 0.004388] ACPI: All ACPI Tables successfully acquired

[ 0.026706] Security Framework initialized

[ 0.026713] TOMOYO Linux initialized

[ 0.026966] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)

[ 0.027696] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)

[ 0.028004] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)

[ 0.028010] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)

[ 0.028182] Initializing cgroup subsys devices

[ 0.028185] Initializing cgroup subsys freezer

[ 0.028187] Initializing cgroup subsys net_cls

[ 0.028188] Initializing cgroup subsys blkio

[ 0.028209] CPU: Physical Processor ID: 0

[ 0.028210] CPU: Processor Core ID: 0

[ 0.028214] mce: CPU supports 9 MCE banks

[ 0.028223] CPU0: Thermal monitoring enabled (TM1)

[ 0.028231] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7

Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0

tlb_flushall_shift: 6

[ 0.028316] Freeing SMP alternatives memory: 24K (ffffffff81e19000 - ffffffff81e1f000)

[ 0.029373] ftrace: allocating 23959 entries in 94 pages

[ 0.039998] Switched APIC routing to physical flat.

[ 0.040375] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.050381] smpboot: CPU0: Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz (fam: 06, model: 1e, stepping: 05)

[ 0.151738] Performance Events: PEBS fmt1+, 16-deep LBR, Nehalem events, Intel PMU driver.

[ 0.151752] perf_event_intel: CPU erratum AAJ80 worked around

[ 0.151754] perf_event_intel: CPUID marked event: 'bus cycles' unavailable

[ 0.151755] ... version: 3

[ 0.151756] ... bit width: 48

[ 0.151757] ... generic registers: 4

[ 0.151758] ... value mask: 0000ffffffffffff

[ 0.151759] ... max period: 000000007fffffff

[ 0.151760] ... fixed-purpose events: 3

[ 0.151760] ... event mask: 000000070000000f

[ 0.153016] x86: Booting SMP configuration:

[ 0.153018] .... node #0, CPUs: #1 #2 #3

[ 0.192878] x86: Booted up 1 node, 4 CPUs

[ 0.192881] smpboot: Total of 4 processors activated (21397.98 BogoMIPS)

[ 0.195676] devtmpfs: initialized

[ 0.198040] PM: Registering ACPI NVS region [mem 0xbf788000-0xbf7dbfff] (344064 bytes)

[ 0.198930] xor: measuring software checksum speed

[ 0.208753] prefetch64-sse: 10900.000 MB/sec

[ 0.218756] generic_sse: 9612.000 MB/sec

[ 0.218757] xor: using function: prefetch64-sse (10900.000 MB/sec)

[ 0.218761] pinctrl core: initialized pinctrl subsystem

[ 0.218796] RTC time: 16:35:18, date: 04/30/15

[ 0.218827] NET: Registered protocol family 16

[ 0.218911] cpuidle: using governor ladder

[ 0.218913] cpuidle: using governor menu

[ 0.218945] ACPI: bus type PCI registered

[ 0.218946] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5

[ 0.219003] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[ 0.219005] PCI: not using MMCONFIG

[ 0.219006] PCI: Using configuration type 1 for base access

[ 0.219761] bio: create slab <bio-0> at 0

[ 0.236765] raid6: sse2x1 6570 MB/s

[ 0.253775] raid6: sse2x2 7785 MB/s

[ 0.270775] raid6: sse2x4 8605 MB/s

[ 0.270777] raid6: using algorithm sse2x4 (8605 MB/s)

[ 0.270778] raid6: using ssse3x2 recovery algorithm

[ 0.270826] ACPI: Added _OSI(Module Device)

[ 0.270828] ACPI: Added _OSI(Processor Device)

[ 0.270829] ACPI: Added _OSI(3.0 _SCP Extensions)

[ 0.270830] ACPI: Added _OSI(Processor Aggregator Device)

[ 0.272740] ACPI: Executed 1 blocks of module-level executable AML code

[ 0.282883] ACPI: SSDT 00000000bf7880c0 001130 (v01 DpgPmm P001Ist 00000011 INTL 20060113)

[ 0.283139] ACPI: Dynamic OEM Table Load:

[ 0.283141] ACPI: SSDT (null) 001130 (v01 DpgPmm P001Ist 00000011 INTL 20060113)

[ 0.283320] ACPI: Interpreter enabled

[ 0.283328] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [_S2_] (20131218/hwxface-580)

[ 0.283339] ACPI: (supports S0 S1 S3 S4 S5)

[ 0.283340] ACPI: Using IOAPIC for interrupt routing

[ 0.283357] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[ 0.284220] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources

[ 0.284704] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[ 0.284808] ACPI: No dock devices found.

[ 0.290742] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[ 0.290747] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]

[ 0.290888] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]

[ 0.290958] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]

[ 0.290960] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]

[ 0.290962] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]

[ 0.290964] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM

[ 0.291189] PCI host bridge to bus 0000:00

[ 0.291192] pci_bus 0000:00: root bus resource [bus 00-ff]

[ 0.291194] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]

[ 0.291195] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]

[ 0.291197] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]

[ 0.291198] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff]

[ 0.291200] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]

[ 0.291201] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff]

[ 0.291210] pci 0000:00:00.0: [8086:d131] type 00 class 0x060000

[ 0.291307] pci 0000:00:08.0: [8086:d155] type 00 class 0x088000

[ 0.291393] pci 0000:00:08.1: [8086:d156] type 00 class 0x088000

[ 0.291479] pci 0000:00:08.2: [8086:d157] type 00 class 0x088000

[ 0.291562] pci 0000:00:08.3: [8086:d158] type 00 class 0x088000

[ 0.291640] pci 0000:00:10.0: [8086:d150] type 00 class 0x088000

[ 0.291712] pci 0000:00:10.1: [8086:d151] type 00 class 0x088000

[ 0.291804] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320

[ 0.291823] pci 0000:00:1a.0: reg 0x10: [mem 0xf7cfe000-0xf7cfe3ff]

[ 0.291906] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold

[ 0.291947] pci 0000:00:1a.0: System wakeup disabled by ACPI

[ 0.291983] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300

[ 0.291996] pci 0000:00:1b.0: reg 0x10: [mem 0xf7cf8000-0xf7cfbfff 64bit]

[ 0.292063] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold

[ 0.292127] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400

[ 0.292190] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold

[ 0.292230] pci 0000:00:1c.0: System wakeup disabled by ACPI

[ 0.292265] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400

[ 0.292331] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold

[ 0.292369] pci 0000:00:1c.4: System wakeup disabled by ACPI

[ 0.292401] pci 0000:00:1c.5: [8086:3b4c] type 01 class 0x060400

[ 0.292464] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold

[ 0.292502] pci 0000:00:1c.5: System wakeup disabled by ACPI

[ 0.292533] pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400

[ 0.292596] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold

[ 0.292636] pci 0000:00:1c.6: System wakeup disabled by ACPI

[ 0.292673] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320

[ 0.292692] pci 0000:00:1d.0: reg 0x10: [mem 0xf7cfd000-0xf7cfd3ff]

[ 0.292775] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold

[ 0.292813] pci 0000:00:1d.0: System wakeup disabled by ACPI

[ 0.292843] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401

[ 0.292916] pci 0000:00:1e.0: System wakeup disabled by ACPI

[ 0.292949] pci 0000:00:1f.0: [8086:3b02] type 00 class 0x060100

[ 0.293102] pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018a

[ 0.293116] pci 0000:00:1f.2: reg 0x10: [io 0x0000-0x0007]

[ 0.293123] pci 0000:00:1f.2: reg 0x14: [io 0x0000-0x0003]

[ 0.293130] pci 0000:00:1f.2: reg 0x18: [io 0x0000-0x0007]

[ 0.293136] pci 0000:00:1f.2: reg 0x1c: [io 0x0000-0x0003]

[ 0.293143] pci 0000:00:1f.2: reg 0x20: [io 0xff90-0xff9f]

[ 0.293150] pci 0000:00:1f.2: reg 0x24: [io 0xffa0-0xffaf]

[ 0.293234] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500

[ 0.293247] pci 0000:00:1f.3: reg 0x10: [mem 0xf7cfc000-0xf7cfc0ff 64bit]

[ 0.293266] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]

[ 0.293339] pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185

[ 0.293353] pci 0000:00:1f.5: reg 0x10: [io 0xbc00-0xbc07]

[ 0.293360] pci 0000:00:1f.5: reg 0x14: [io 0xb880-0xb883]

[ 0.293366] pci 0000:00:1f.5: reg 0x18: [io 0xb800-0xb807]

[ 0.293373] pci 0000:00:1f.5: reg 0x1c: [io 0xb480-0xb483]

[ 0.293380] pci 0000:00:1f.5: reg 0x20: [io 0xb400-0xb40f]

[ 0.293387] pci 0000:00:1f.5: reg 0x24: [io 0xb080-0xb08f]

[ 0.293523] pci 0000:04:00.0: [10de:0614] type 00 class 0x030000

[ 0.293536] pci 0000:04:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]

[ 0.293550] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]

[ 0.293564] pci 0000:04:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit]

[ 0.293574] pci 0000:04:00.0: reg 0x24: [io 0xec00-0xec7f]

[ 0.293583] pci 0000:04:00.0: reg 0x30: [mem 0xfbde0000-0xfbdfffff pref]

[ 0.295315] pci 0000:00:1c.0: PCI bridge to [bus 04]

[ 0.295321] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]

[ 0.295327] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbdfffff]

[ 0.295335] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]

[ 0.295415] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330

[ 0.295441] pci 0000:03:00.0: reg 0x10: [mem 0xf7ff8000-0xf7ffffff 64bit]

[ 0.295573] pci 0000:03:00.0: supports D1 D2

[ 0.295575] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot

[ 0.297321] pci 0000:00:1c.4: PCI bridge to [bus 03]

[ 0.297330] pci 0000:00:1c.4: bridge window [mem 0xf7f00000-0xf7ffffff]

[ 0.297416] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000

[ 0.297433] pci 0000:02:00.0: reg 0x10: [io 0xd800-0xd8ff]

[ 0.297462] pci 0000:02:00.0: reg 0x18: [mem 0xf7eff000-0xf7efffff 64bit]

[ 0.297496] pci 0000:02:00.0: reg 0x30: [mem 0xf7ec0000-0xf7edffff pref]

[ 0.297592] pci 0000:02:00.0: supports D1 D2

[ 0.297594] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold

[ 0.297637] pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'

[ 0.297646] pci 0000:00:1c.5: PCI bridge to [bus 02]

[ 0.297649] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]

[ 0.297652] pci 0000:00:1c.5: bridge window [mem 0xf7e00000-0xf7efffff]

[ 0.297729] pci 0000:01:00.0: [197b:2361] type 00 class 0x010185

[ 0.297813] pci 0000:01:00.0: reg 0x24: [mem 0xf7dfe000-0xf7dfffff]

[ 0.297877] pci 0000:01:00.0: PME# supported from D3hot

[ 0.297934] pci 0000:01:00.1: [197b:2361] type 00 class 0x010185

[ 0.297953] pci 0000:01:00.1: reg 0x10: [io 0xcc00-0xcc07]

[ 0.297963] pci 0000:01:00.1: reg 0x14: [io 0xc880-0xc883]

[ 0.297972] pci 0000:01:00.1: reg 0x18: [io 0xc800-0xc807]

[ 0.297982] pci 0000:01:00.1: reg 0x1c: [io 0xc480-0xc483]

[ 0.297991] pci 0000:01:00.1: reg 0x20: [io 0xc400-0xc40f]

[ 0.298087] pci 0000:01:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'

[ 0.298095] pci 0000:00:1c.6: PCI bridge to [bus 01]

[ 0.298098] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]

[ 0.298102] pci 0000:00:1c.6: bridge window [mem 0xf7d00000-0xf7dfffff]

[ 0.298142] pci 0000:05:03.0: [1814:0201] type 00 class 0x028000

[ 0.298158] pci 0000:05:03.0: reg 0x10: [mem 0xfbefe000-0xfbefffff]

[ 0.298282] pci 0000:00:1e.0: PCI bridge to [bus 05] (subtractive decode)

[ 0.298286] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]

[ 0.298291] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)

[ 0.298293] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)

[ 0.298294] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)

[ 0.298296] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)

[ 0.298297] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)

[ 0.298299] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode)

[ 0.298582] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 *11 12 14 15)

[ 0.298625] ACPI: PCI Interrupt Link [LNKB] (IRQs *5)

[ 0.298665] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15)

[ 0.298707] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.

[ 0.298749] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled.

[ 0.298792] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 *10 11 12 14 15)

[ 0.298834] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 6 7 10 11 12 14 15)

[ 0.298876] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 *7 10 11 12 14 15)

[ 0.298919] ACPI: Enabled 3 GPEs in block 00 to 3F

[ 0.298984] vgaarb: device added: PCI:0000:04:00.0,decodes=io+mem,owns=io+mem,locks=none

[ 0.298986] vgaarb: loaded

[ 0.298987] vgaarb: bridge control possible 0000:04:00.0

[ 0.299040] SCSI subsystem initialized

[ 0.299087] libata version 3.00 loaded.

[ 0.299171] PCI: Using ACPI for IRQ routing

[ 0.304823] PCI: Discovered peer bus ff

[ 0.304824] PCI: root bus ff: using default resources

[ 0.304825] PCI: Probing PCI hardware (bus ff)

[ 0.304847] PCI host bridge to bus 0000:ff

[ 0.304850] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]

[ 0.304851] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff]

[ 0.304853] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]

[ 0.304858] pci 0000:ff:00.0: [8086:2c51] type 00 class 0x060000

[ 0.304895] pci 0000:ff:00.1: [8086:2c81] type 00 class 0x060000

[ 0.304931] pci 0000:ff:02.0: [8086:2c90] type 00 class 0x060000

[ 0.304963] pci 0000:ff:02.1: [8086:2c91] type 00 class 0x060000

[ 0.304997] pci 0000:ff:03.0: [8086:2c98] type 00 class 0x060000

[ 0.305031] pci 0000:ff:03.1: [8086:2c99] type 00 class 0x060000

[ 0.305064] pci 0000:ff:03.4: [8086:2c9c] type 00 class 0x060000

[ 0.305098] pci 0000:ff:04.0: [8086:2ca0] type 00 class 0x060000

[ 0.305131] pci 0000:ff:04.1: [8086:2ca1] type 00 class 0x060000

[ 0.305163] pci 0000:ff:04.2: [8086:2ca2] type 00 class 0x060000

[ 0.305195] pci 0000:ff:04.3: [8086:2ca3] type 00 class 0x060000

[ 0.305230] pci 0000:ff:05.0: [8086:2ca8] type 00 class 0x060000

[ 0.305262] pci 0000:ff:05.1: [8086:2ca9] type 00 class 0x060000

[ 0.305294] pci 0000:ff:05.2: [8086:2caa] type 00 class 0x060000

[ 0.305327] pci 0000:ff:05.3: [8086:2cab] type 00 class 0x060000

[ 0.305369] pci_bus 0000:ff: busn_res: [bus ff] end is updated to ff

[ 0.305373] PCI: pci_cache_line_size set to 64 bytes

[ 0.305438] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]

[ 0.305439] e820: reserve RAM buffer [mem 0xbf770000-0xbfffffff]

[ 0.305518] NetLabel: Initializing

[ 0.305519] NetLabel: domain hash size = 128

[ 0.305520] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.305531] NetLabel: unlabeled traffic allowed by default

[ 0.305578] HPET: 8 timers in total, 5 timers will be used for per-cpu timer

[ 0.305584] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 40, 41, 42, 43, 44, 0

[ 0.305589] hpet0: 8 comparators, 64-bit 14.318180 MHz counter

[ 0.307631] hpet: hpet2 irq 40 for MSI

[ 0.307670] hpet: hpet3 irq 41 for MSI

[ 0.307703] hpet: hpet4 irq 42 for MSI

[ 0.307737] hpet: hpet5 irq 43 for MSI

[ 0.307761] Switched to clocksource hpet

[ 0.312619] pnp: PnP ACPI init

[ 0.312631] ACPI: bus type PNP registered

[ 0.312689] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved

[ 0.312691] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved

[ 0.312693] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved

[ 0.312695] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved

[ 0.312698] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)

[ 0.312735] pnp 00:01: [dma 4]

[ 0.312751] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)

[ 0.312784] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)

[ 0.312804] pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)

[ 0.312825] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)

[ 0.312972] system 00:05: [io 0x0290-0x029f] has been reserved

[ 0.312975] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.313121] system 00:06: [io 0x04d0-0x04d1] has been reserved

[ 0.313124] system 00:06: [io 0x0800-0x087f] could not be reserved

[ 0.313125] system 00:06: [io 0x0500-0x057f] has been reserved

[ 0.313128] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved

[ 0.313129] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved

[ 0.313131] system 00:06: [mem 0xfed40000-0xfed8ffff] has been reserved

[ 0.313134] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.313201] pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)

[ 0.313251] pnp 00:08: Plug and Play ACPI device, IDs INT0800 (active)

[ 0.313307] system 00:09: [mem 0xffc00000-0xffdfffff] has been reserved

[ 0.313310] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.313464] pnp 00:0a: [dma 0 disabled]

[ 0.313513] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)

[ 0.313595] system 00:0b: [mem 0xfec00000-0xfec00fff] could not be reserved

[ 0.313597] system 00:0b: [mem 0xfee00000-0xfee00fff] has been reserved

[ 0.313600] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.313667] pnp 00:0c: Plug and Play ACPI device, IDs PNP0f03 PNP0f13 (active)

[ 0.313716] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved

[ 0.313719] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.313882] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved

[ 0.313884] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved

[ 0.313886] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved

[ 0.313888] system 00:0e: [mem 0x00100000-0xbfffffff] could not be reserved

[ 0.313890] system 00:0e: [mem 0xfed90000-0xffffffff] could not be reserved

[ 0.313892] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)

[ 0.313992] pnp: PnP ACPI: found 15 devices

[ 0.313993] ACPI: bus type PNP unregistered

[ 0.320447] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000

[ 0.320451] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000

[ 0.320458] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000

[ 0.320465] pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000

[ 0.320475] pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000

[ 0.320476] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000

[ 0.320478] pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000

[ 0.320480] pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000

[ 0.320486] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0000000-0xc01fffff 64bit pref]

[ 0.320489] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]

[ 0.320492] pci 0000:00:1c.6: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]

[ 0.320495] pci 0000:00:1c.4: BAR 13: assigned [io 0x1000-0x1fff]

[ 0.320497] pci 0000:00:1c.0: PCI bridge to [bus 04]

[ 0.320499] pci 0000:00:1c.0: bridge window [io 0xe000-0xefff]

[ 0.320504] pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xfbdfffff]

[ 0.320507] pci 0000:00:1c.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]

[ 0.320511] pci 0000:00:1c.4: PCI bridge to [bus 03]

[ 0.320514] pci 0000:00:1c.4: bridge window [io 0x1000-0x1fff]

[ 0.320518] pci 0000:00:1c.4: bridge window [mem 0xf7f00000-0xf7ffffff]

[ 0.320521] pci 0000:00:1c.4: bridge window [mem 0xc0000000-0xc01fffff 64bit pref]

[ 0.320525] pci 0000:00:1c.5: PCI bridge to [bus 02]

[ 0.320527] pci 0000:00:1c.5: bridge window [io 0xd000-0xdfff]

[ 0.320531] pci 0000:00:1c.5: bridge window [mem 0xf7e00000-0xf7efffff]

[ 0.320534] pci 0000:00:1c.5: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]

[ 0.320539] pci 0000:00:1c.6: PCI bridge to [bus 01]

[ 0.320541] pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]

[ 0.320545] pci 0000:00:1c.6: bridge window [mem 0xf7d00000-0xf7dfffff]

[ 0.320548] pci 0000:00:1c.6: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]

[ 0.320553] pci 0000:00:1e.0: PCI bridge to [bus 05]

[ 0.320557] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff]

[ 0.320564] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]

[ 0.320565] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]

[ 0.320567] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]

[ 0.320568] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]

[ 0.320570] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]

[ 0.320571] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff]

[ 0.320573] pci_bus 0000:04: resource 0 [io 0xe000-0xefff]

[ 0.320574] pci_bus 0000:04: resource 1 [mem 0xf8000000-0xfbdfffff]

[ 0.320576] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]

[ 0.320578] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]

[ 0.320579] pci_bus 0000:03: resource 1 [mem 0xf7f00000-0xf7ffffff]

[ 0.320581] pci_bus 0000:03: resource 2 [mem 0xc0000000-0xc01fffff 64bit pref]

[ 0.320582] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]

[ 0.320584] pci_bus 0000:02: resource 1 [mem 0xf7e00000-0xf7efffff]

[ 0.320585] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]

[ 0.320587] pci_bus 0000:01: resource 0 [io 0xc000-0xcfff]

[ 0.320588] pci_bus 0000:01: resource 1 [mem 0xf7d00000-0xf7dfffff]

[ 0.320590] pci_bus 0000:01: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]

[ 0.320591] pci_bus 0000:05: resource 1 [mem 0xfbe00000-0xfbefffff]

[ 0.320593] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]

[ 0.320594] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]

[ 0.320596] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]

[ 0.320597] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]

[ 0.320599] pci_bus 0000:05: resource 8 [mem 0xc0000000-0xdfffffff]

[ 0.320600] pci_bus 0000:05: resource 9 [mem 0xf0000000-0xfed8ffff]

[ 0.320603] pci_bus 0000:ff: resource 4 [io 0x0000-0xffff]

[ 0.320604] pci_bus 0000:ff: resource 5 [mem 0x00000000-0xfffffffff]

[ 0.320629] NET: Registered protocol family 2

[ 0.320801] TCP established hash table entries: 32768 (order: 6, 262144 bytes)

[ 0.320908] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)

[ 0.321048] TCP: Hash tables configured (established 32768 bind 32768)

[ 0.321069] TCP: reno registered

[ 0.321075] UDP hash table entries: 2048 (order: 4, 65536 bytes)

[ 0.321105] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)

[ 0.321187] NET: Registered protocol family 1

[ 0.321494] pci 0000:04:00.0: Boot video device

[ 0.321502] pci 0000:00:1c.4: enabling device (0106 -> 0107)

[ 0.321639] PCI: CLS 32 bytes, default 64

[ 0.321673] Trying to unpack rootfs image as initramfs...

[ 0.412231] Freeing initrd memory: 8036K (ffff880037817000 - ffff880037ff0000)

[ 0.412236] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[ 0.412238] software IO TLB [mem 0xbb770000-0xbf770000] (64MB) mapped at [ffff8800bb770000-ffff8800bf76ffff]

[ 0.412719] futex hash table entries: 4096 (order: 6, 262144 bytes)

[ 0.412803] audit: initializing netlink subsys (disabled)

[ 0.412827] audit: type=2000 audit(1430411718.281:1): initialized

[ 0.434110] bounce pool size: 64 pages

[ 0.434117] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[ 0.435251] zbud: loaded

[ 0.435390] VFS: Disk quotas dquot_6.5.2

[ 0.435434] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 0.435765] msgmni has been set to 7882

[ 0.436024] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[ 0.436061] io scheduler noop registered

[ 0.436062] io scheduler deadline registered

[ 0.436067] io scheduler cfq registered (default)

[ 0.436494] pci_hotplug: PCI Hot Plug PCI Core version: 0.5

[ 0.436506] pciehp: PCI Express Hot Plug Controller Driver version: 0.4

[ 0.436549] vesafb: mode is 800x600x16, linelength=1600, pages=2

[ 0.436550] vesafb: scrolling: redraw

[ 0.436551] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0

[ 0.436563] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010800000, using 1875k, total 14336k

[ 0.467999] Console: switching to colour frame buffer device 100x37

[ 0.499169] fb0: VESA VGA frame buffer device

[ 0.499183] intel_idle: MWAIT substates: 0x1120

[ 0.499188] intel_idle: v0.4 model 0x1E

[ 0.499188] intel_idle: lapic_timer_reliable_states 0x2

[ 0.499317] GHES: HEST is not enabled!

[ 0.499360] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 0.519980] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A

[ 0.520302] Linux agpgart interface v0.103

[ 0.522421] brd: module loaded

[ 0.522500] ahci 0000:01:00.0: version 3.0

[ 0.522543] ahci 0000:01:00.0: JMB361 has only one port

[ 0.522552] ahci 0000:01:00.0: forcing port_map 0x3 -> 0x1

[ 0.532906] ahci 0000:01:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x1 impl SATA mode

[ 0.532909] ahci 0000:01:00.0: flags: 64bit ncq pm led clo pmp pio slum part

[ 0.533292] scsi0 : ahci

[ 0.533625] scsi1 : ahci

[ 0.533669] ata1: SATA max UDMA/133 abar m8192@0xf7dfe000 port 0xf7dfe100 irq 18

[ 0.533670] ata2: DUMMY

[ 0.533725] i8042: PNP: PS/2 Controller [PNP0f03S2M] at 0x60,0x64 irq 12

[ 0.533726] i8042: PNP: PS/2 controller doesn't have KBD irq; using default 1

[ 0.536220] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 0.536225] serio: i8042 AUX port at 0x60,0x64 irq 12

[ 0.536564] mousedev: PS/2 mouse device common for all mice

[ 0.536906] rtc_cmos 00:02: RTC can wake from S4

[ 0.537098] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0

[ 0.537133] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs

[ 0.537162] ledtrig-cpu: registered to indicate activity on CPUs

[ 0.537278] TCP: cubic registered

[ 0.537285] Key type dns_resolver registered

[ 0.537286] mpls_gso: MPLS GSO support

[ 0.537903] registered taskstats version 1

[ 0.538110] bio: create slab <bio-1> at 1

[ 0.538418] Btrfs loaded

[ 0.539007] Magic number: 11:967:591

[ 0.539181] rtc_cmos 00:02: setting system clock to 2015-04-30 16:35:18 UTC (1430411718)

[ 0.539183] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found

[ 0.539251] PM: Checking hibernation image partition UUID=a40f3411-6ad7-4786-9e79-43dfbfe0c35d

[ 0.839147] ata1: SATA link down (SStatus 0 SControl 300)

[ 0.942566] psmouse serio1: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64

[ 1.415429] tsc: Refined TSC clocksource calibration: 2674.966 MHz

[ 1.672822] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2

[ 1.675650] PM: Hibernation image not present or could not be loaded.

[ 1.676902] Freeing unused kernel memory: 1252K (ffffffff81ce0000 - ffffffff81e19000)

[ 1.676904] Write protecting the kernel read-only data: 12288k

[ 1.681205] Freeing unused kernel memory: 1748K (ffff88000164b000 - ffff880001800000)

[ 1.683588] Freeing unused kernel memory: 1016K (ffff880001b02000 - ffff880001c00000)

[ 1.731412] dracut: dracut-034

[ 1.743510] pata_jmicron 0000:01:00.1: enabling device (0000 -> 0001)

[ 1.744008] scsi2 : pata_jmicron

[ 1.744271] scsi3 : pata_jmicron

[ 1.744305] ata3: PATA max UDMA/100 cmd 0xcc00 ctl 0xc880 bmdma 0xc400 irq 19

[ 1.744307] ata4: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 bmdma 0xc408 irq 19

[ 1.901319] ata3.00: ATAPI: PIONEER DVD-RW DVR-109, 1.58, max UDMA/66

[ 1.901331] ata3.01: ATAPI: DV-516E, 3.01, max UDMA/33

[ 1.907307] ata3.00: configured for UDMA/66

[ 1.913308] ata3.01: configured for UDMA/33

[ 1.920670] scsi 2:0:0:0: CD-ROM PIONEER DVD-RW DVR-109 1.58 PQ: 0 ANSI: 5

[ 1.921863] scsi 2:0:1:0: CD-ROM TEAC DV-516E 3.01 PQ: 0 ANSI: 5

[ 2.088458] ata_piix 0000:00:1f.2: version 2.13

[ 2.088538] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]

[ 2.089582] scsi4 : ata_piix

[ 2.089747] scsi5 : ata_piix

[ 2.089818] ata5: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xff90 irq 14

[ 2.089824] ata6: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xff98 irq 15

[ 2.089963] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]

[ 2.090684] scsi6 : ata_piix

[ 2.090788] scsi7 : ata_piix

[ 2.090819] ata7: SATA max UDMA/133 cmd 0xbc00 ctl 0xb880 bmdma 0xb400 irq 21

[ 2.090821] ata8: SATA max UDMA/133 cmd 0xb800 ctl 0xb480 bmdma 0xb408 irq 21

[ 2.406678] ata7: SATA link down (SStatus 0 SControl 300)

[ 2.417468] ata8: SATA link down (SStatus 0 SControl 300)

[ 2.417488] Switched to clocksource tsc

[ 2.851257] ata5.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 2.851274] ata5.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 2.858003] ata5.00: ATA-8: WDC WD2500AAJS-00VTA0, 01.01B01, max UDMA/133

[ 2.858010] ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)

[ 2.858203] ata5.01: ATA-9: M4-CT064M4SSD2, 010G, max UDMA/100

[ 2.858210] ata5.01: 125045424 sectors, multi 16: LBA48 NCQ (depth 0/32)

[ 2.860205] ata6.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 2.860220] ata6.01: SATA link down (SStatus 0 SControl 300)

[ 2.864612] ata5.00: configured for UDMA/133

[ 2.867529] ata5.01: configured for UDMA/100

[ 2.867902] scsi 4:0:0:0: Direct-Access ATA WDC WD2500AAJS-0 01.0 PQ: 0 ANSI: 5

[ 2.868217] sd 4:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)

[ 2.868394] scsi 4:0:1:0: Direct-Access ATA M4-CT064M4SSD2 010G PQ: 0 ANSI: 5

[ 2.868619] sd 4:0:0:0: [sda] Write Protect is off

[ 2.868625] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 2.868663] sd 4:0:1:0: [sdb] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)

[ 2.868703] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 2.868718] sd 4:0:1:0: [sdb] Write Protect is off

[ 2.868720] sd 4:0:1:0: [sdb] Mode Sense: 00 3a 00 00

[ 2.868732] sd 4:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 2.869593] sdb: sdb1

[ 2.879527] ata6.00: ATA-7: SAMSUNG HD103UJ, 1AA01118, max UDMA7

[ 2.879533] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)

[ 2.898583] ata6.00: configured for UDMA/133

[ 2.898956] scsi 5:0:0:0: Direct-Access ATA SAMSUNG HD103UJ 1AA0 PQ: 0 ANSI: 5

[ 2.899250] sd 5:0:0:0: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)

[ 2.899701] sd 5:0:0:0: [sdc] Write Protect is off

[ 2.899708] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 2.899904] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 2.902974] sda: sda1 sda2 < sda5 sda6 sda7 >

[ 2.903584] sd 4:0:1:0: [sdb] Attached SCSI disk

[ 2.903872] sdc: sdc1

[ 2.904282] sd 4:0:0:0: [sda] Attached SCSI disk

[ 2.904327] sd 5:0:0:0: [sdc] Attached SCSI disk

[ 2.918824] Uniform Multi-Platform E-IDE driver

[ 3.030638] systemd-udevd[226]: starting version 208

[ 3.070276] dracut: Starting plymouth daemon

[ 4.019845] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3

[ 4.019850] ACPI: Power Button [PWRB]

[ 4.019968] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4

[ 4.019971] ACPI: Power Button [PWRF]

[ 4.036800] ACPI: bus type USB registered

[ 4.036822] usbcore: registered new interface driver usbfs

[ 4.036830] usbcore: registered new interface driver hub

[ 4.036854] usbcore: registered new device driver usb

[ 4.040921] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 4.041391] ehci-pci: EHCI PCI platform driver

[ 4.041522] ehci-pci 0000:00:1a.0: EHCI Host Controller

[ 4.041528] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1

[ 4.041540] ehci-pci 0000:00:1a.0: debug port 2

[ 4.045451] ehci-pci 0000:00:1a.0: cache line size of 32 is not supported

[ 4.045468] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7cfe000

[ 4.047668] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00

[ 4.047703] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002

[ 4.047705] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 4.047706] usb usb1: Product: EHCI Host Controller

[ 4.047708] usb usb1: Manufacturer: Linux 3.14.32-desktop-1.mga4 ehci_hcd

[ 4.047709] usb usb1: SerialNumber: 0000:00:1a.0

[ 4.047801] hub 1-0:1.0: USB hub found

[ 4.047807] hub 1-0:1.0: 2 ports detected

[ 4.047966] ehci-pci 0000:00:1d.0: EHCI Host Controller

[ 4.047971] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2

[ 4.047982] ehci-pci 0000:00:1d.0: debug port 2

[ 4.051894] ehci-pci 0000:00:1d.0: cache line size of 32 is not supported

[ 4.051906] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7cfd000

[ 4.052809] sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray

[ 4.052812] cdrom: Uniform CD-ROM driver Revision: 3.20

[ 4.052987] sr 2:0:0:0: Attached scsi CD-ROM sr0

[ 4.053797] random: nonblocking pool is initialized

[ 4.054647] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00

[ 4.054686] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002

[ 4.054688] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 4.054689] usb usb2: Product: EHCI Host Controller

[ 4.054691] usb usb2: Manufacturer: Linux 3.14.32-desktop-1.mga4 ehci_hcd

[ 4.054692] usb usb2: SerialNumber: 0000:00:1d.0

[ 4.054833] hub 2-0:1.0: USB hub found

[ 4.054846] hub 2-0:1.0: 2 ports detected

[ 4.055371] xhci_hcd 0000:03:00.0: xHCI Host Controller

[ 4.055376] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3

[ 4.055525] xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X

[ 4.056366] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002

[ 4.056369] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 4.056370] usb usb3: Product: xHCI Host Controller

[ 4.056372] usb usb3: Manufacturer: Linux 3.14.32-desktop-1.mga4 xhci_hcd

[ 4.056373] usb usb3: SerialNumber: 0000:03:00.0

[ 4.056465] hub 3-0:1.0: USB hub found

[ 4.056474] hub 3-0:1.0: 2 ports detected

[ 4.056547] xhci_hcd 0000:03:00.0: xHCI Host Controller

[ 4.056550] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 4

[ 4.056584] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003

[ 4.056586] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 4.056588] usb usb4: Product: xHCI Host Controller

[ 4.056589] usb usb4: Manufacturer: Linux 3.14.32-desktop-1.mga4 xhci_hcd

[ 4.056591] usb usb4: SerialNumber: 0000:03:00.0

[ 4.056680] hub 4-0:1.0: USB hub found

[ 4.056689] hub 4-0:1.0: 2 ports detected

[ 4.065558] sr1: scsi3-mmc drive: 48x/48x cd/rw xa/form2 cdda tray

[ 4.065693] sr 2:0:1:0: Attached scsi CD-ROM sr1

[ 4.349967] usb 1-1: new high-speed USB device number 2 using ehci-pci

[ 4.464589] usb 1-1: New USB device found, idVendor=8087, idProduct=0020

[ 4.464595] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 4.464812] hub 1-1:1.0: USB hub found

[ 4.464891] hub 1-1:1.0: 6 ports detected

[ 4.567980] usb 2-1: new high-speed USB device number 2 using ehci-pci

[ 4.585372] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]

[ 4.585376] PM: Marking nosave pages: [mem 0xbf770000-0xffffffff]

[ 4.585941] PM: Basic memory bitmaps created

[ 4.618645] PM: Basic memory bitmaps freed

[ 4.620733] PM: Starting manual resume from disk

[ 4.620735] PM: Hibernation image partition 8:5 present

[ 4.620736] PM: Looking for hibernation image.

[ 4.624300] PM: Image not found (code -22)

[ 4.624304] PM: Hibernation image not present or could not be loaded.

[ 4.644859] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

[ 4.682398] usb 2-1: New USB device found, idVendor=8087, idProduct=0020

[ 4.682404] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0

[ 4.682699] hub 2-1:1.0: USB hub found

[ 4.682889] hub 2-1:1.0: 8 ports detected

[ 4.686109] dracut: Checking ext4: /dev/disk/by-uuid/62ad7fa3-7961-4a4f-9e9b-21edb645f909

[ 4.686250] dracut: issuing e2fsck -a /dev/disk/by-uuid/62ad7fa3-7961-4a4f-9e9b-21edb645f909

[ 4.696229] dracut: /dev/disk/by-uuid/62ad7fa3-7961-4a4f-9e9b-21edb645f909: clean, 214856/3907584 files, 3777531/15629229 blocks

[ 4.697662] dracut: Mounting /dev/disk/by-uuid/62ad7fa3-7961-4a4f-9e9b-21edb645f909 with -o acl,discard,relatime

[ 4.703472] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: acl,discard

[ 4.710636] dracut: Mounted root filesystem /dev/sdb1

[ 4.757322] usb 1-1.4: new full-speed USB device number 3 using ehci-pci

[ 4.774553] dracut: Switching root

[ 4.776554] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.

[ 4.845281] usb 1-1.4: New USB device found, idVendor=058f, idProduct=9360

[ 4.845288] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 4.845292] usb 1-1.4: Product: USB Reader

[ 4.845295] usb 1-1.4: Manufacturer:

[ 4.845298] usb 1-1.4: SerialNumber: 2004888

[ 4.845425] systemd[1]: RTC configured in localtime, applying delta of 120 minutes to system time.

[ 4.848119] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)

[ 4.874740] systemd[1]: Inserted module 'autofs4'

[ 4.897760] NET: Registered protocol family 10

[ 4.898238] systemd[1]: Inserted module 'ipv6'

[ 4.898627] systemd[1]: Set hostname to <LinuxMga>.

[ 4.959537] usb 2-1.2: new high-speed USB device number 3 using ehci-pci

[ 5.025926] systemd[1]: Starting Replay Read-Ahead Data...

[ 5.026361] systemd[1]: Starting Collect Read-Ahead Data...

[ 5.026641] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.

[ 5.026684] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[ 5.026700] systemd[1]: Starting Login Prompts.

[ 5.026736] systemd[1]: Reached target Login Prompts.

[ 5.026754] systemd[1]: Starting OpenVPN Networks.

[ 5.026787] systemd[1]: Reached target OpenVPN Networks.

[ 5.026796] systemd[1]: Starting System Time Synchronized.

[ 5.026826] systemd[1]: Reached target System Time Synchronized.

[ 5.026838] systemd[1]: Starting Delayed Shutdown Socket.

[ 5.026886] systemd[1]: Listening on Delayed Shutdown Socket.

[ 5.026896] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.

[ 5.026938] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.

[ 5.026950] systemd[1]: Starting Encrypted Volumes.

[ 5.026979] systemd[1]: Reached target Encrypted Volumes.

[ 5.027003] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.

[ 5.027094] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

[ 5.027107] systemd[1]: Starting Journal Socket.

[ 5.027208] systemd[1]: Listening on Journal Socket.

[ 5.027224] systemd[1]: Starting LSB: Supports the direct execution of binary formats....

[ 5.027510] systemd[1]: Starting Create list of required static device nodes for the current kernel...

[ 5.027793] systemd[1]: Starting Set default kernel console loglevel...

[ 5.028096] systemd-readahead[481]: Bumped block_nr parameter of 8:16 to 20480. This is a temporary hack and should be removed one day.

[ 5.030360] systemd[1]: Mounting Huge Pages File System...

[ 5.030625] systemd[1]: Mounting POSIX Message Queue File System...

[ 5.030896] systemd[1]: Mounting Debug File System...

[ 5.031174] systemd[1]: Mounting RPC Pipe File System...

[ 5.031454] systemd[1]: Mounting RPC Pipe File System...

[ 5.035332] systemd[1]: Starting Journal Service...

[ 5.035679] systemd[1]: Started Journal Service.

[ 5.073089] RPC: Registered named UNIX socket transport module.

[ 5.073092] RPC: Registered udp transport module.

[ 5.073093] RPC: Registered tcp transport module.

[ 5.073094] RPC: Registered tcp NFSv4.1 backchannel transport module.

[ 5.098600] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).

[ 5.153220] loop: module loaded

[ 5.163998] EXT4-fs (sdb1): re-mounted. Opts: acl,discard

[ 5.183640] systemd-udevd[560]: starting version 208

[ 5.244638] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4

[ 5.258841] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[ 5.258850] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control

[ 5.259048] r8169 0000:02:00.0: irq 46 for MSI/MSI-X

[ 5.259188] r8169 0000:02:00.0 eth0: RTL8168b/8111b at 0xffffc90010788000, 94:0c:6d:84:58:52, XID 18000000 IRQ 46

[ 5.259190] r8169 0000:02:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]

[ 5.260784] ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082f conflicts with OpRegion 0x0000000000000800-0x000000000000084f (PMRG) (20131218/utaddress-258)

[ 5.260789] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 5.260792] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054f conflicts with OpRegion 0x0000000000000500-0x000000000000054f (GPS1) (20131218/utaddress-258)

[ 5.260795] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 5.260796] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000054f (GPS1) (20131218/utaddress-258)

[ 5.260798] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (GPS0) (20131218/utaddress-258)

[ 5.260801] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 5.260802] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000054f (GPS1) (20131218/utaddress-258)

[ 5.260804] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000053f (GPS0) (20131218/utaddress-258)

[ 5.260806] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 5.260807] lpc_ich: Resource conflict(s) found affecting gpio_ich

[ 5.285536] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x3

[ 5.303913] ACPI Warning: SystemIO range 0x0000000000000400-0x000000000000041f conflicts with OpRegion 0x0000000000000400-0x000000000000040f (SMRG) (20131218/utaddress-258)

[ 5.303918] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver

[ 5.304167] EDAC MC: Ver: 3.0.0

[ 5.314532] snd_hda_intel 0000:00:1b.0: irq 47 for MSI/MSI-X

[ 5.330260] cfg80211: Calling CRDA to update world regulatory domain

[ 5.330380] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)

[ 5.330413] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)

[ 5.330419] EDAC i7core: Driver loaded, 1 memory controller(s) found.

[ 5.378640] microcode: CPU0 sig=0x106e5, pf=0x2, revision=0x3

[ 5.378947] microcode: CPU0 updated to revision 0x6, date = 2013-07-01

[ 5.378955] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x3

[ 5.378971] microcode: CPU1 sig=0x106e5, pf=0x2, revision=0x3

[ 5.379207] microcode: CPU1 updated to revision 0x6, date = 2013-07-01

[ 5.379214] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x3

[ 5.379266] microcode: CPU2 sig=0x106e5, pf=0x2, revision=0x3

[ 5.379502] microcode: CPU2 updated to revision 0x6, date = 2013-07-01

[ 5.379538] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x3

[ 5.379553] microcode: CPU3 sig=0x106e5, pf=0x2, revision=0x3

[ 5.379782] microcode: CPU3 updated to revision 0x6, date = 2013-07-01

[ 5.379821] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

[ 5.454784] [drm] Initialized drm 1.1.0 20060810

[ 5.460489] usb-storage 1-1.4:1.0: USB Mass Storage device detected

[ 5.460619] scsi8 : usb-storage 1-1.4:1.0

[ 5.460680] usbcore: registered new interface driver usb-storage

[ 5.478967] ieee80211 phy0: rt2x00_set_chip: Info - Chipset detected - rt: 2560, rf: 0003, rev: 0004

[ 5.480595] autoconfig: line_outs=4 (0x24/0x25/0x26/0x27/0x0) type:line

[ 5.480597] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[ 5.480599] hp_outs=1 (0x28/0x0/0x0/0x0/0x0)

[ 5.480599] mono: mono_out=0x0

[ 5.480600] dig-out=0x2d/0x2e

[ 5.480601] inputs:

[ 5.480602] Front Mic=0x29

[ 5.480603] Rear Mic=0x2b

[ 5.480604] Line=0x2a

[ 5.480605] CD=0x2c

[ 5.489507] input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12

[ 5.489609] input: HDA Intel MID Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11

[ 5.489664] input: HDA Intel MID Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10

[ 5.489707] input: HDA Intel MID Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9

[ 5.489748] input: HDA Intel MID Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8

[ 5.489791] input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7

[ 5.489832] input: HDA Intel MID Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6

[ 5.489875] input: HDA Intel MID Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5

[ 5.491188] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'

[ 5.548669] iTCO_vendor_support: vendor-support=0

[ 5.549203] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10

[ 5.549233] iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)

[ 5.549464] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)

[ 5.568739] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround

[ 5.581989] cfg80211: World regulatory domain updated:

[ 5.581993] cfg80211: DFS Master region: unset

[ 5.581994] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 5.581995] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[ 5.581997] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[ 5.581998] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)

[ 5.581999] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)

[ 5.582000] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)

[ 5.582001] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)

[ 5.582008] cfg80211: Calling CRDA for country: FR

[ 5.583514] cfg80211: Regulatory domain changed to country: FR

[ 5.583516] cfg80211: DFS Master region: unset

[ 5.583517] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)

[ 5.583519] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)

[ 5.583520] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)

[ 5.583521] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)

[ 5.583522] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2700 mBm)

[ 5.583523] cfg80211: (57240000 KHz - 65880000 KHz @ 2160000 KHz), (N/A,

Humm il doit en manquer un bout.

Tu peux essayer de tout coller dans un "pastebin" ?

Je suppose que le forum ne peut encaisser de si longues lignes de texte :

http://pastebin.com/

ah effectivement, c'est un peu long.
je ne connaissais pas pastebin

voila http://pastebin.com/QqQMjjJB

OK, c'est mieux

On dirait que tu as un périphérique USB branché qui ralentisse le démarrage. C'est un disque dur externe ?

non, je pense que c'est le lecteur de carte SD, CF, Memorystick et smartmédia, il est branché sur un port USB dans un emplacement 3' 1/2 , mais je ne mets des cartes dedans qu'en cas de besoin

Édité par daniel-51 Le 30/04/2015 à 17h25

Tu peux essayer de le débrancher et de redémarrer le PC pour voir ?

bof, pas mieux















et dmesg

Édité par daniel-51 Le 30/04/2015 à 17h47

Humm, je sèche un peu.

Que renvoie

rpm -qa | grep kernel





cat /etc/fstab





lsblk -f





cat /proc/cmdline





cat /var/log/boot.log

Édité par daniel-51 Le 02/05/2015 à 11h20

la suite

bon, j'ai désactivé une ligne dans fstab, mais c'est toujours aussi long.



systemd-analyze

Startup finished in 4.761s (kernel) + 1min 57.525s (userspace) = 2min 2.286s



mais je n'ai plus les Failed au démarrage

Bon, le coup du fstab, la seule entrée qui semble être absente (donc ralenti le démarrage) a été commentée.

Ensuite, je vois



Je ne sais pas combien de temps dure le "build" mais il faudrait pouvoir faire "échap" pendant le démarrage pour estimer le temps. C'est peut être cette étape qui prends du temps.

Je vois aussi un montage samba:


Ce partage est-il monté après le (long) démarrage ? Car je ne vois pas d'adresse IP mais un nom (g3), sait-il le résoudre ? Ne cherche-t-il pas à le monter alors que le réseau n'est encore pas opérationnel ?

bien, justement, je n'arrive pas a appuyer sur echap au démarrage.

du moins, lorsque c'est pris en compte, j'ai toutes les lignes qui défilent normalement jusqu'au bout.

d'est donc avant que cela coince...







oui, G3 est bien dans mon host