Probleme de droits d'écriture sur var/www/html

Probleme de droits d'écriture sur var/www/html [Réglé]

Système et matériels / Installation et configuration

gilles27 Membre non connecté

Le 06/02/2015 à 18h19

Voici mon httpd.conf :

Citation :

#

# This is the main Apache HTTP server configuration file. It contains the

# configuration directives that give the server its instructions.

# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.

# In particular, see

# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>

# for a discussion of each configuration directive.

#

# Do NOT simply read the instructions in here without understanding

# what they do. They're here only as hints or reminders. If you are unsure

# consult the online docs. You have been warned.

#

# Configuration and logfile names: If the filenames you specify for many

# of the server's control files begin with "/" (or "drive:/" for Win32), the

# server will use that explicit path. If the filenames do *not* begin

# with "/", the value of ServerRoot is prepended -- so 'log/access_log'

# with ServerRoot set to '/www' will be interpreted by the

# server as '/www/log/access_log', where as '/log/access_log' will be

# interpreted as '/log/access_log'.

#

# ServerRoot: The top of the directory tree under which the server's

# configuration, error, and log files are kept.

#

# Do not add a slash at the end of the directory path. If you point

# ServerRoot at a non-local disk, be sure to specify a local disk on the

# Mutex directive, if file-based mutexes are used. If you wish to share the

# same ServerRoot for multiple httpd daemons, you will need to change at

# least PidFile.

#

ServerRoot "/etc/httpd"

#

# Listen: Allows you to bind Apache to specific IP addresses and/or

# ports, instead of the default. See also the <VirtualHost>

# directive.

#

# Change this to Listen on specific IP addresses as shown below to

# prevent Apache from glomming onto all bound IP addresses.

#

#Listen 12.34.56.78:80

Listen 80

#

# Dynamic Shared Object (DSO) Support

#

# To be able to use the functionality of a module which was built as a DSO you

# have to place corresponding `LoadModule' lines at this location so the

# directives contained in it are actually available _before_ they are used.

# Statically compiled modules (those listed by `httpd -l') do not need

# to be loaded here.

#

# Include module configuration

Include conf/modules.d/*.conf

#

# If you wish httpd to run as a different user or group, you must run

# httpd as root initially and it will switch.

#

# User/Group: The name (or #number) of the user/group to run httpd as.

# It is usually good practice to create a dedicated user and group for

# running httpd, as with most system services.

#

User apache

Group apache

# 'Main' server configuration

#

# The directives in this section set up the values used by the 'main'

# server, which responds to any requests that aren't handled by a

# <VirtualHost> definition. These values also provide defaults for

# any <VirtualHost> containers you may define later in the file.

#

# All of these directives may appear inside <VirtualHost> containers,

# in which case these default settings will be overridden for the

# virtual host being defined.

#

#

# ServerAdmin: Your address, where problems with the server should be

# e-mailed. This address appears on some server-generated pages, such

# as error documents. e.g. admin@your-domain.com

#

ServerAdmin root@localhost

#

# ServerName gives the name and port that the server uses to identify itself.

# This can often be determined automatically, but we recommend you specify

# it explicitly to prevent problems during startup.

#

# If your host doesn't have a registered DNS name, enter its IP address here.

#

#ServerName www.example.com:80

#

# Deny access to the entirety of your server's filesystem. You must

# explicitly permit access to web content directories in other

# <Directory> blocks below.

#

<Directory />

AllowOverride none

Require all denied

</Directory>

#

# Note that from this point forward you must specifically allow

# particular features to be enabled - so if something's not working as

# you might expect, make sure that you have specifically enabled it

# below.

#

#

# DocumentRoot: The directory out of which you will serve your

# documents. By default, all requests are taken from this directory, but

# symbolic links and aliases may be used to point to other locations.

#

DocumentRoot "/var/www/html"

#

# Relax access to content within /var/www.

#

<Directory "/var/www">

AllowOverride None

# Allow open access:

Require all granted

</Directory>

# Further relax access to the default document root:

<Directory "/var/www/html">

#

# Possible values for the Options directive are "None", "All",

# or any combination of:

# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews

#

# Note that "MultiViews" must be named *explicitly* --- "Options All"

# doesn't give it to you.

#

# The Options directive is both complicated and important. Please see

# http://httpd.apache.org/docs/2.4/mod/core.html#options

# for more information.

#

Options Indexes FollowSymLinks

#

# AllowOverride controls what directives may be placed in .htaccess files.

# It can be "All", "None", or any combination of the keywords:

# Options FileInfo AuthConfig Limit

#

AllowOverride None

#

# Controls who can get stuff from this server.

#

Require all granted

</Directory>

#

# DirectoryIndex: sets the file that Apache will serve if a directory

# is requested.

#

<IfModule dir_module>

DirectoryIndex index.html

</IfModule>

#

# The following lines prevent .htaccess and .htpasswd files from being

# viewed by Web clients.

#

<Files ".ht*">

Require all denied

</Files>

#

# ErrorLog: The location of the error log file.

# If you do not specify an ErrorLog directive within a <VirtualHost>

# container, error messages relating to that virtual host will be

# logged here. If you *do* define an error logfile for a <VirtualHost>

# container, that host's errors will be logged there and not here.

#

ErrorLog "logs/error_log"

#

# LogLevel: Control the number of messages logged to the error_log.

# Possible values include: debug, info, notice, warn, error, crit,

# alert, emerg.

#

LogLevel warn

<IfModule log_config_module>

#

# The following directives define some format nicknames for use with

# a CustomLog directive (see below).

#

LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i"" combined

LogFormat "%h %l %u %t "%r" %>s %b" common

<IfModule logio_module>

# You need to enable mod_logio.c to use %I and %O

LogFormat "%h %l %u %t "%r" %>s %b "%{Referer}i" "%{User-Agent}i" %I %O" combinedio

</IfModule>

#

# The location and format of the access logfile (Common Logfile Format).

# If you do not define any access logfiles within a <VirtualHost>

# container, they will be logged here. Contrariwise, if you *do*

# define per-<VirtualHost> access logfiles, transactions will be

# logged therein and *not* in this file.

#

#CustomLog "logs/access_log" common

#

# If you prefer a logfile with access, agent, and referer information

# (Combined Logfile Format) you can use the following directive.

#

CustomLog "logs/access_log" combined

</IfModule>

<IfModule alias_module>

#

# Redirect: Allows you to tell clients about documents that used to

# exist in your server's namespace, but do not anymore. The client

# will make a new request for the document at its new location.

# Example:

# Redirect permanent /foo http://www.example.com/bar

#

# Alias: Maps web paths into filesystem paths and is used to

# access content that does not live under the DocumentRoot.

# Example:

# Alias /webpath /full/filesystem/path

#

# If you include a trailing / on /webpath then the server will

# require it to be present in the URL. You will also likely

# need to provide a <Directory> section to allow access to

# the filesystem path.

#

# ScriptAlias: This controls which directories contain server scripts.

# ScriptAliases are essentially the same as Aliases, except that

# documents in the target directory are treated as applications and

# run by the server when requested rather than as documents sent to the

# client. The same rules about trailing "/" apply to ScriptAlias

# directives as to Alias.

#

ScriptAlias /cgi-bin/ "/var/www/cgi-bin/"

</IfModule>

#

# "/var/www/cgi-bin" should be changed to whatever your ScriptAliased

# CGI directory exists, if you have that configured.

#

<Directory "/var/www/cgi-bin">

AllowOverride None

Options None

Require all granted

</Directory>

<IfModule mime_module>

#

# TypesConfig points to the file containing the list of mappings from

# filename extension to MIME-type.

#

TypesConfig /etc/mime.types

#

# AddType allows you to add to or override the MIME configuration

# file specified in TypesConfig for specific file types.

#

#AddType application/x-gzip .tgz

#

# AddEncoding allows you to have certain browsers uncompress

# information on the fly. Note: Not all browsers support this.

#

#AddEncoding x-compress .Z

#AddEncoding x-gzip .gz .tgz

#

# If the AddEncoding directives above are commented-out, then you

# probably should define those extensions to indicate media types:

#

AddType application/x-compress .Z

AddType application/x-gzip .gz .tgz

#

# AddHandler allows you to map certain file extensions to "handlers":

# actions unrelated to filetype. These can be either built into the server

# or added with the Action directive (see below)

#

# To use CGI scripts outside of ScriptAliased directories:

# (You will also need to add "ExecCGI" to the "Options" directive.)

#

#AddHandler cgi-script .cgi

# For type maps (negotiated resources):

#AddHandler type-map var

#

# Filters allow you to process content before it is sent to the client.

#

# To parse .shtml files for server-side includes (SSI):

# (You will also need to add "Includes" to the "Options" directive.)

#

AddType text/html .shtml

AddOutputFilter INCLUDES .shtml

</IfModule>

#

# Specify a default charset for all content served; this enables

# interpretation of all content as UTF-8 by default. To use the

# default browser choice (ISO-8859-1), or to allow the META tags

# in HTML content to override this choice, comment out this

# directive:

#

AddDefaultCharset UTF-8

#

# The mod_mime_magic module allows the server to use various hints from the

# contents of the file itself to determine its type. The MIMEMagicFile

# directive tells the module where the hint definitions are located.

#

MIMEMagicFile conf/magic

#

# Customizable error responses come in three flavors:

# 1) plain text 2) local redirects 3) external redirects

#

# Some examples:

#ErrorDocument 500 "The server made a boo boo."

#ErrorDocument 404 /missing.html

#ErrorDocument 404 "/cgi-bin/missing_handler.pl"

#ErrorDocument 402 http://www.example.com/subscription_info.html

#

#

# EnableMMAP and EnableSendfile: On systems that support it,

# memory-mapping or the sendfile syscall may be used to deliver

# files. This usually improves server performance, but must

# be turned off when serving from networked-mounted

# filesystems or if support for these functions is otherwise

# broken on your system.

# Defaults if commented: EnableMMAP On, EnableSendfile Off

#

#EnableMMAP off

EnableSendfile on

# Include generic server configuration

Include conf/conf.d/*.conf

# Include sites configuration

Include conf/sites.d/*.conf

Et dans /etc/httpd/conf/sites.d j'ai trouvé le fichier 00_default_vhosts.conf que voici :

Citation :

# default virtual host, used for all requests that do not

# match a ServerName or ServerAlias in any <VirtualHost> block.

<VirtualHost _default_:80>

ServerAdmin root@localhost

ServerName localhost

</VirtualHost>

Et enfin le php.ini :

Citation:<div class="blockquote">[PHP]

;;;;;;;;;;;;;;;;;;;

; About php.ini ;

;;;;;;;;;;;;;;;;;;;

; PHP's initialization file, generally called php.ini, is responsible for

; configuring many of the aspects of PHP's behavior.

; PHP attempts to find and load this configuration from a number of locations.

; The following is a summary of its search order:

; 1. SAPI module specific location.

; 2. The PHPRC environment variable. (As of PHP 5.2.0)

; 3. A number of predefined registry keys on Windows (As of PHP 5.2.0)

; 4. Current working directory (except CLI)

; 5. The web server's directory (for SAPI modules), or directory of PHP

; (otherwise in Windows)

; 6. The directory from the --with-config-file-path compile time option, or the

; Windows directory (C:windows or C:winnt)

; See the PHP docs for more specific information.

; http://php.net/configuration.file

; The syntax of the file is extremely simple. Whitespace and lines

; beginning with a semicolon are silently ignored (as you probably guessed).

; Section headers (e.g. [Foo]) are also silently ignored, even though

; they might mean something in the future.

; Directives following the section heading [PATH=/www/mysite] only

; apply to PHP files in the /www/mysite directory. Directives

; following the section heading [HOST=www.example.com] only apply to

; PHP files served from www.example.com. Directives set in these

; special sections cannot be overridden by user-defined INI files or

; at runtime. Currently, [PATH=] and [HOST=] sections only work under

; CGI/FastCGI.

; http://php.net/ini.sections

; Directives are specified using the following syntax:

; directive = value

; Directive names are *case sensitive* - foo=bar is different from FOO=bar.

; Directives are variables used to configure PHP or PHP extensions.

; There is no name validation. If PHP can't find an expected

; directive because it is not set or is mistyped, a default value will be used.

; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one

; of the INI constants (On, Off, True, False, Yes, No and None) or an expression

; (e.g. E_ALL & ~E_NOTICE), a quoted string ("bar"), or a reference to a

; previously set variable or directive (e.g. ${foo})

; Expressions in the INI file are limited to bitwise operators and parentheses:

; | bitwise OR

; ^ bitwise XOR

; & bitwise AND

; ~ bitwise NOT

; ! boolean NOT

; Boolean flags can be turned on using the values 1, On, True or Yes.

; They can be turned off using the values 0, Off, False or No.

; An empty string can be denoted by simply not writing anything after the equal

; sign, or by using the None keyword:

; foo = ; sets foo to an empty string

; foo = None ; sets foo to an empty string

; foo = "None" ; sets foo to the string 'None'

; If you use constants in your value, and these constants belong to a

; dynamically loaded extension (either a PHP extension or a Zend extension),

; you may only use these constants *after* the line that loads the extension.

;;;;;;;;;;;;;;;;;;;

; About this file ;

;;;;;;;;;;;;;;;;;;;

; PHP comes packaged with two INI files. One that is recommended to be used

; in production environments and one that is recommended to be used in

; development environments.

; php.ini-production contains settings which hold security, performance and

; best practices at its core. But please be aware, these settings may break

; compatibility with older or less security conscience applications. We

; recommending using the production ini in production and testing environments.

; php.ini-development is very similar to its production variant, except it's

; much more verbose when it comes to errors. We recommending using the

; development version only in development environments as errors shown to

; application users can inadvertently leak otherwise secure information.

; This is php.ini-production INI file.

;;;;;;;;;;;;;;;;;;;

; Quick Reference ;

;;;;;;;;;;;;;;;;;;;

; The following are all the settings which are different in either the production

; or development versions of the INIs with respect to PHP's default behavior.

; Please see the actual settings later in the document for more details as to why

; we recommend these changes in PHP's behavior.

; display_errors

; Default Value: On

; Development Value: On

; Production Value: Off

; display_startup_errors

; Default Value: Off

; Development Value: On

; Production Value: Off

; error_reporting

; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED

; Development Value: E_ALL

; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT

; html_errors

; Default Value: On

; Development Value: On

; Production value: On

; log_errors

; Default Value: Off

; Development Value: On

; Production Value: On

; max_input_time

; Default Value: -1 (Unlimited)

; Development Value: 60 (60 seconds)

; Production Value: 60 (60 seconds)

; output_buffering

; Default Value: Off

; Development Value: 4096

; Production Value: 4096

; register_argc_argv

; Default Value: On

; Development Value: Off

; Production Value: Off

; request_order

; Default Value: None

; Development Value: "GP"

; Production Value: "GP"

; session.gc_divisor

; Default Value: 100

; Development Value: 1000

; Production Value: 1000

; session.hash_bits_per_character

; Default Value: 4

; Development Value: 5

; Production Value: 5

; short_open_tag

; Default Value: On

; Development Value: Off

; Production Value: Off

; track_errors

; Default Value: Off

; Development Value: On

; Production Value: Off

; url_rewriter.tags

; Default Value: "a=href,area=href,frame=src,form=,fieldset="

; Development Value: "a=href,area=href,frame=src,input=src,form=fakeentry"

; Production Value: "a=href,area=href,frame=src,input=src,form=fakeentry"

; variables_order

; Default Value: "EGPCS"

; Development Value: "GPCS"

; Production Value: "GPCS"

;;;;;;;;;;;;;;;;;;;;

; php.ini Options ;

;;;;;;;;;;;;;;;;;;;;

; Name for user-defined php.ini (.htaccess) files. Default is ".user.ini"

;user_ini.filename = ".user.ini"

; To disable this feature set this option to empty value

user_ini.filename =

; TTL for user-defined php.ini files (time-to-live) in seconds. Default is 300 seconds (5 minutes)

;user_ini.cache_ttl = 300

;;;;;;;;;;;;;;;;;;;;

; Language Options ;

;;;;;;;;;;;;;;;;;;;;

; Enable the PHP scripting language engine under Apache.

; http://php.net/engine

engine = On

; This directive determines whether or not PHP will recognize code between

; <? and ?> tags as PHP source which should be processed as such. It is

; generally recommended that <?php and ?> should be used and that this feature

; should be disabled, as enabling it may result in issues when generating XML

; documents, however this remains supported for backward compatibility reasons.

; Note that this directive does not control the <?= shorthand tag, which can be

; used regardless of this directive.

; Default Value: On

; Development Value: Off

; Production Value: Off

; http://php.net/short-open-tag

short_open_tag = On

; Allow ASP-style <% %> tags.

; http://php.net/asp-tags

asp_tags = Off

; The number of significant digits displayed in floating point numbers.

; http://php.net/precision

precision = 14

; Output buffering is a mechanism for controlling how much output data

; (excluding headers and cookies) PHP should keep internally before pushing that

; data to the client. If your application's output exceeds this setting, PHP

; will send that data in chunks of roughly the size you specify.

; Turning on this setting and managing its maximum buffer size can yield some

; interesting side-effects depending on your application and web server.

; You may be able to send headers and cookies after you've already sent output

; through print or echo. You also may see performance benefits if your server is

; emitting less packets due to buffered output versus PHP streaming the output

; as it gets it. On production servers, 4096 bytes is a good setting for performance

; reasons.

; Note: Output buffering can also be controlled via Output Buffering Control

; functions.

; Possible Values:

; On = Enabled and buffer is unlimited. (Use with caution)

; Off = Disabled

; Integer = Enables the buffer and sets its maximum size in bytes.

; Note: This directive is hardcoded to Off for the CLI SAPI

; Default Value: Off

; Development Value: 4096

; Production Value: 4096

; http://php.net/output-buffering

output_buffering = 4096

; You can redirect all of the output of your scripts to a function. For

; example, if you set output_handler to "mb_output_handler", character

; encoding will be transparently converted to the specified encoding.

; Setting any output handler automatically turns on output buffering.

; Note: People who wrote portable scripts should not depend on this ini

; directive. Instead, explicitly set the output handler using ob_start().

; Using this ini directive may cause problems unless you know what script

; is doing.

; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"

; and you cannot use both "ob_gzhandler" and "zlib.output_compression".

; Note: output_handler must be empty if this is set 'On' !!!!

; Instead you must use zlib.output_handler.

; http://php.net/output-handler

;output_handler =

; Transparent output compression using the zlib library

; Valid values for this option are 'off', 'on', or a specific buffer size

; to be used for compression (default is 4KB)

; Note: Resulting chunk size may vary due to nature of compression. PHP

; outputs chunks that are few hundreds bytes each as a result of

; compression. If you prefer a larger chunk size for better

; performance, enable output_buffering in addition.

; Note: You need to use zlib.output_handler instead of the standard

; output_handler, or otherwise the output will be corrupted.

; http://php.net/zlib.output-compression

zlib.output_compression = Off

; http://php.net/zlib.output-compression-level

;zlib.output_compression_level = -1

; You cannot specify additional output handlers if zlib.output_compression

; is activated here. This setting does the same as output_handler but in

; a different order.

; http://php.net/zlib.output-handler

;zlib.output_handler =

; Implicit flush tells PHP to tell the output layer to flush itself

; automatically after every output block. This is equivalent to calling the

; PHP function flush() after each and every call to print() or echo() and each

; and every HTML block. Turning this option on has serious performance

; implications and is generally recommended for debugging purposes only.

; http://php.net/implicit-flush

; Note: This directive is hardcoded to On for the CLI SAPI

implicit_flush = Off

; The unserialize callback function will be called (with the undefined class'

; name as parameter), if the unserializer finds an undefined class

; which should be instantiated. A warning appears if the specified function is

; not defined, or if the function doesn't include/implement the missing class.

; So only set this entry, if you really want to implement such a

; callback-function.

unserialize_callback_func =

; When floats & doubles are serialized store serialize_precision significant

; digits after the floating point. The default value ensures that when floats

; are decoded with unserialize, the data will remain the same.

serialize_precision = 17

; open_basedir, if set, limits all file operations to the defined directory

; and below. This directive makes most sense if used in a per-directory

; or per-virtualhost web server configuration file.

; http://php.net/open-basedir

;open_basedir =

; This directive allows you to disable certain functions for security reasons.

; It receives a comma-delimited list of function names.

; http://php.net/disable-functions

disable_functions =

; this is an example

;disable_functions = php_uname, getmyuid, getmypid, passthru, leak, listen, diskfreespace, tmpfile, link, ignore_user_abord, shell_exec, dl, set_time_limit, exec, system, highlight_file, source, show_source, fpaththru, virtual, posix_ctermid, posix _getcwd, posix_getegid, posix_geteuid, posix_getgid, posix_getgrgid, posix_getgrnam, posix_getgroups, posix_getlogin, posix_g etpgid, posix_getpgrp, posix_getpid, posix, _getppid, posix_getpwnam, posix_getpwuid, posix_getrlimit, posix_getsid, posix_ge tuid, posix_isatty, posix_kill, posix_mkfifo, posix_setegid, posix_seteuid, posix_setgid, posix_setpgid, posix_setsid, posix_ setuid, posix_times, posix_ttyname, posix_uname, proc_open, proc_close, proc_get_status, proc_nice, proc_terminate, phpinfo

; This directive allows you to disable certain classes for security reasons.

; It receives a comma-delimited list of class names.

; http://php.net/disable-classes

disable_classes =

; Colors for Syntax Highlighting mode. Anything that's acceptable in

; would work.

; http://php.net/syntax-highlighting

;highlight.string = #DD0000

;highlight.comment = #FF9900

;highlight.keyword = #007700

;highlight.default = #0000BB

;highlight.html = #000000

; If enabled, the request will be allowed to complete even if the user aborts

; the request. Consider enabling it if executing long requests, which may end up

; being interrupted by the user or a browser timing out. PHP's default behavior

; is to disable this feature.

; http://php.net/ignore-user-abort

;ignore_user_abort = On

; Determines the size of the realpath cache to be used by PHP. This value should

; be increased on systems where PHP opens many files to reflect the quantity of

; the file operations performed.

; http://php.net/realpath-cache-size

;realpath_cache_size = 16k

; Duration of time, in seconds for which to cache realpath information for a given

; file or directory. For systems with rarely changing files, consider increasing this

; value.

; http://php.net/realpath-cache-ttl

;realpath_cache_ttl = 120

; Enables or disables the circular reference collector.

; http://php.net/zend.enable-gc

zend.enable_gc = On

; If enabled, scripts may be written in encodings that are incompatible with

; the scanner. CP936, Big5, CP949 and Shift_JIS are the examples of such

; encodings. To use this feature, mbstring extension must be enabled.

; Default: Off

;zend.multibyte = Off

; Allows to set the default encoding for the scripts. This value will be used

; unless "declare(encoding=...)" directive appears at the top of the script.

; Only affects if zend.multibyte is set.

; Default: ""

;zend.script_encoding =

;;;;;;;;;;;;;;;;;

; Miscellaneous ;

;;;;;;;;;;;;;;;;;

; Decides whether PHP may expose the fact that it is installed on the server

; (e.g. by adding its signature to the Web server header). It is no security

; threat in any way, but it makes it possible to determine whether you use PHP

; on your server or not.

; http://php.net/expose-php

expose_php = On

;;;;;;;;;;;;;;;;;;;

; Resource Limits ;

;;;;;;;;;;;;;;;;;;;

; Maximum execution time of each script, in seconds

; http://php.net/max-execution-time

; Note: This directive is hardcoded to 0 for the CLI SAPI

max_execution_time = 30

; Maximum amount of time each script may spend parsing request data. It's a good

; idea to limit this time on productions servers in order to eliminate unexpectedly

; long running scripts.

; Note: This directive is hardcoded to -1 for the CLI SAPI

; Default Value: -1 (Unlimited)

; Development Value: 60 (60 seconds)

; Production Value: 60 (60 seconds)

; http://php.net/max-input-time

max_input_time = 60

; Maximum input variable nesting level

; http://php.net/max-input-nesting-level

;max_input_nesting_level = 64

; How many GET/POST/COOKIE input variables may be accepted

; max_input_vars = 1000

; Maximum amount of memory a script may consume (128MB)

; http://php.net/memory-limit

memory_limit = 128M

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; Error handling and logging ;

;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;

; This directive informs PHP of which errors, warnings and notices you would like

; it to take action for. The recommended way of setting values for this

; directive is through the use of the error level constants and bitwise

; operators. The error level constants are below here for convenience as well as

; some common settings and their meanings.

; By default, PHP is set to take action on all errors, notices and warnings EXCEPT

; those related to E_NOTICE and E_STRICT, which together cover best practices and

; recommended coding standards in PHP. For performance reasons, this is the

; recommend error reporting setting. Your production server shouldn't be wasting

; resources complaining about best practices and coding standards. That's what

; development servers and development settings are for.

; Note: The php.ini-development file has this setting as E_ALL. This

; means it pretty much reports everything which is exactly what you want during

; development and early testing.

;

; Error Level Constants:

; E_ALL - All errors and warnings (includes E_STRICT as of PHP 5.4.0)

; E_ERROR - fatal run-time errors

; E_RECOVERABLE_ERROR - almost fatal run-time errors

; E_WARNING - run-time warnings (non-fatal errors)

; E_PARSE - compile-time parse errors

; E_NOTICE - run-time notices (these are warnings which often result

; from a bug in your code, but it's possible that it was

; intentional (e.g., using an uninitialized variable and

; relying on the fact it's automatically initialized to an

; empty string)

; E_STRICT - run-time notices, enable to have PHP suggest changes

; to your code which will ensure the best interoperability

; and forward compatibility of your code

; E_CORE_ERROR - fatal errors that occur during PHP's initial startup

; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's

; initial startup

; E_COMPILE_ERROR - fatal compile-time errors

; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)

; E_USER_ERROR - user-generated error message

; E_USER_WARNING - user-generated warning message

; E_USER_NOTICE - user-generated notice message

; E_DEPRECATED - warn about code that will not work in future versions

; of PHP

; E_USER_DEPRECATED - user-generated deprecation warnings

;

; Common Values:

; E_ALL (Show all errors, warnings and notices including coding standards.)

; E_ALL & ~E_NOTICE (Show all errors, except for notices)

; E_ALL & ~E_NOTICE & ~E_STRICT (Show all errors, except for notices and coding standards warnings.)

; E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR (Show only errors)

; Default Value: E_ALL & ~E_NOTICE & ~E_STRICT & ~E_DEPRECATED

; Development Value: E_ALL

; Production Value: E_ALL & ~E_DEPRECATED & ~E_STRICT

; http://php.net/error-reporting

error_reporting = E_ALL & ~E_DEPRECATED & ~E_STRICT

; This directive controls whether or not and where PHP will output errors,

; notices and warnings too. Error output is very useful during development, but

; it could be very dangerous in production environments. Depending on the code

; which is triggering the error, sensitive information could potentially leak

; out of your application such as database usernames and passwords or worse.

; It's recommended that errors be logged on production servers rather than

; having the errors sent to STDOUT.

; Possible Values:

; Off = Do not display any errors

; stderr = Display errors to STDERR (affects only CGI/CLI binaries!)

; On or stdout = Display errors to STDOUT

; Default Value: On

; Development Value: On

; Production Value: Off

; http://php.net/display-errors

display_errors = Off

; The display of errors which occur during PHP's startup sequence are handled

; separately from display_errors. PHP's default behavior is to suppress those

; errors from clients. Turning the display of startup errors on can be useful in

; debugging configuration problems. But, it's strongly recommended that you

; leave this setting off on production servers.

; Default Value: Off

; Development Value: On

; Production Value: Off

; http://php.net/display-startup-errors

display_startup_errors = Off

; Besides displaying errors, PHP can also log errors to locations such as a

; server-specific log, STDERR, or a location specified by the error_log

; directive found below. While errors should not be displayed on productions

; servers they should still be monitored and logging is a great way to do that.

; Default Value: Off

; Development Value: On

; Production Value: On

; http://php.net/log-errors

log_errors = On

; Set maximum length of log_errors. In error_log information about the source is

; added. The default is 1024 and 0 allows to not apply any maximum length at all.

; http://php.net/log-errors-max-len

log_errors_max_len = 1024

; Do not log repeated messages. Repeated errors must occur in same file on same

; line unless ignore_repeated_source is set true.

; http://php.net/ignore-repeated-errors

ignore_repeated_errors = Off

; Ignore source of message when ignoring repeated messages. When this setting

; is On you will not log errors with repeated messages from different files or

; source lines.

; http://php.net/ignore-repeated-source

ignore_repeated_source = Off

; If this parameter is set to Off, then memory leaks will not be shown (on

; stdout or in the log). This has only effect in a debug compile, and if

; error reporting includes E_WARNING in the allowed list

; http://php.net/report-memleaks

report_memleaks = On

; This setting is on by default.

;report_zend_debug = 0

; Store the last error/warning message in $php_errormsg (boolean). Setting this value

; to On can assist in debugging and is appropriate for development servers. It should

; however be disabled on production servers.

; Default Value: Off

; Development Value: On

; Production Value: Off

; http://php.net/track-errors

track_errors = Off

; Turn off normal error reporting and emit XML-RPC error XML

; http://php.net/xmlrpc-errors

;xmlrpc_errors = 0

; An XML-RPC faultCode

;xmlrpc_error_number = 0

; When PHP displays or logs an error, it has the capability of formatting the

; error message as HTML for easier reading. This directive controls whether

; the error message is formatted as HTML or not.

; Note: This directive is hardcoded to Off for the CLI SAPI

; Default Value: On

; Development Value: On

; Production value: On

; http://php.net/html-errors

html_errors = On

; If html_errors is set to On *and* docref_root is not empty, then PHP

; produces clickable error messages that direct to a page describing the error

; or function causing the error in detail.

; You can download a copy of the PHP manual from http://php.net/docs

; and change docref_root to the base URL of your local copy including the

; leading '/'. You must also specify the file extension being used including

; the dot. PHP's default behavior is to leave these settings empty, in which

; case no links to documentation are generated.

; Note: Never use this feature for production boxes.

; http://php.net/docref-root

; Examples

;docref_root = "/phpmanual/"

; http://php.net/docref-ext

;docref_ext = .html

; String to output before an error message. PHP's default behavior is to leave

; this setting blank.

; http://php.net/error-prepend-string

; Example:

;error_prepend_string = ""

; String to output after an error message. PHP's default behavior is to leave

; this setting blank.

; http://php.net/error-append-string

; Example:

;error_append_string = ""

; Log errors to specified file. PHP's default behavior is to leave this value

; empty.

; http://php.net/error-log

; Example:

;error_log = php_errors.log

; Log errors to syslog (Event Log on Windows).

;error_log = syslog

;windows.show_crt_warning

; Default value: 0

; Development value: 0

; Production value: 0

;;;;;;;;;;;;;;;;;

; Data Handling ;

;;;;;;;;;;;;;;;;;

; The separator used in PHP generated URLs to separate arguments.

; PHP's default setting is "&".

; http://php.net/arg-separator.output

; Example:

;arg_separator.output = "&"

; List of separator(s) used by PHP to parse input URLs into variables.

; PHP's default setting is "&".

; NOTE: Every character in this directive is considered as separator!

; http://php.net/arg-separator.input

; Example:

;arg_separator.input = ";&"

; This directive determines which super global arrays are registered when PHP

; starts up. G,P,C,E & S are abbreviations for the following respective super

; globals: GET, POST, COOKIE, ENV and SERVER. There is a performance penalty

; paid for the registration of these arrays and because ENV is not as commonly

; used as the others, ENV is not recommended on productions servers. You

; can still get access to the environment variables through getenv() should you

; need to.

; Default Value: "EGPCS"

; Development Value: "GPCS"

; Production Value: "GPCS";

; http://php.net/variables-order

variables_order = "GPCS"

; This directive determines which super global data (G,P,C,E & S) should

; be registered into the super global array REQUEST. If so, it also determines

; the order in which that data is registered. The values for this directive are

; specified in the same manner as the variables_order directive, EXCEPT one.

; Leaving this value empty will cause PHP to use the value set in the

; variables_order directive. It does not mean it will leave the super globals

; array REQUEST empty.

; Default Value: None

; Development Value: "GP"

; Production Value: "GP"

; http://php.net/request-order

request_order = "GP"

; This directive determines whether PHP registers $argv & $argc each time it

; runs. $argv contains an array of all the arguments passed to PHP when a script

; is invoked. $argc contains an integer representing the number of arguments

; that were passed when the script was invoked. These arrays are extremely

; useful when running scripts from the command line. When this directive is

; enabled, registering these variables consumes CPU cycles and memory each time

; a script is executed. For performance reasons, this feature should be disabled

; on production servers.

; Note: This directive is hardcoded to On for the CLI SAPI

; Default Value: On

; Development Value: Off

; Production Value: Off

; http://php.net/register-argc-argv

register_argc_argv = Off

; When enabled, the ENV, REQUEST and SERVER variables are created when they're

; first used (Just In Time) instead of when the script starts. If these

; variables are not used within a script, having this directive on will result

; in a performance gain. The PHP directive register_argc_argv must be disabled

; for this directive to have any affect.

; http://php.net/auto-globals-jit

auto_globals_jit = On

; Whether PHP will read the POST data.

; This option is enabled by default.

; Most likely, you won't want to disable this option globally. It causes $_POST

; and $_FILES to always be empty; the only way you will be able to read the

; POST data will be through the php://input stream wrapper. This can be useful

; to proxy requests or to process the POST data in a memory efficient fashion.

; http://php.net/enable-post-data-reading

;enable_post_data_reading = Off

; Maximum size of POST data that PHP will accept.

; Its value may be 0 to disable the limit. It is ignored if POST data reading

; is disabled through enable_post_data_reading.

; http://php.net/post-max-size

post_max_size = 8M

; Automatically add files before PHP document.

; http://php.net/auto-prepend-file

auto_prepend_file =

; Automatically add files after PHP document.

; http://php.net/auto-append-file

auto_append_file =

; By default, PHP will output a character encoding using

; the Content-type: header. To disable sending of the charset, simply

; set it to be empty.

;

; PHP's built-in default is text/html

; http://php.net/default-mimetype

default_mimetype = "text/html"

; PHP's default character set is set to empty.

; http://php.net/default-charset

;default_charset = "UTF-8"

; Always populate the $HTTP_RAW_POST_DATA variable. PHP's default behavior is

; to disable this feature. If post reading is disabled through

; enable_post_data_reading, $HTTP_RAW_POST_DATA is *NOT* populated.

; http://php.net/always-populate-raw-post-data

;always_populate_raw_post_data = On

;;;;;;;;;;;;;;;;;;;;;;;;;

; Paths and Directories ;

;;;;;;;;;;;;;;;;;;;;;;;;;

; PHP's default setting for include_path is ".;/path/to/php/pear"

; http://php.net/include-path

include_path = ".:/usr/lib64/php/:/usr/share/pear/:/usr/share/php/"

; The root of the PHP pages, used only if nonempty.

; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root

; if you are running php as a CGI under any web server (other than IIS)

; see documentation for security issues. The alternate is to use the

; cgi.force_redirect configuration below

; http://php.net/doc-root

doc_root =

; The directory under which PHP opens the script using /~username used only

; if nonempty.

; http://php.net/user-dir

user_dir =

; Directory in which the loadable extensions (modules) reside.

; http://php.net/extension-dir

extension_dir = "/usr/lib64/php/extensions"

; Directory where the temporary files should be placed.

; Defaults to the system default (see sys_get_temp_dir)

; sys_temp_dir = "/tmp"

; Whether or not to enable the dl() function. The dl() function does NOT work

; properly in multithreaded servers, such as IIS or Zeus, and is automatically

; disabled on them.

; http://php.net/enable-dl

enable_dl = On

; cgi.force_redirect is necessary to provide security running PHP as a CGI under

; most web servers. Left undefined, PHP turns this on by default. You can

; turn it off here AT YOUR OWN RISK

; **You CAN safely turn this off for IIS, in fact, you MUST.**

; http://php.net/cgi.force-redirect

;cgi.force_redirect = 1

; if cgi.nph is enabled it will force cgi to always sent Status: 200 with

; every request. PHP's default behavior is to disable this feature.

;cgi.nph = 1

; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape

; (iPlanet) web servers, you MAY need to set an environment variable name that PHP

; will look for to know it is OK to continue execution. Setting this variable MAY

; cause security issues, KNOW WHAT YOU ARE DOING FIRST.

; http://php.net/cgi.redirect-status-env

;cgi.redirect_status_env =

; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's

; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok

; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting

; this to 1 will cause PHP CGI to fix its paths to conform to the spec. A setting

; of zero causes PHP to behave as before. Default is 1. You should fix your scripts

; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.

; http://php.net/cgi.fix-pathinfo

;cgi.fix_pathinfo=1

; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate

; security tokens of the calling client. This allows IIS to define the

; security context that the request runs under. mod_fastcgi under Apache

; does not currently support this feature (03/17/2002)

; Set to 1 if running under IIS. Default is zero.

; http://php.net/fastcgi.impersonate

;fastcgi.impersonate = 1

; Disable logging through FastCGI connection. PHP's default behavior is to enable

; this feature.

;fastcgi.logging = 0

; cgi.rfc2616_headers configuration option tells PHP what type of headers to

; use when sending HTTP response code. If it's set 0 PHP sends Status: header that

; is supported by Apache. When this option is set to 1 PHP will send

; RFC2616 compliant header.

; Default is zero.

; http://php.net/cgi.rfc2616-headers

;cgi.rfc2616_headers = 0

;;;;;;;;;;;;;;;;

; File Uploads ;

;;;;;;;;;;;;;;;;

; Whether to allow HTTP file uploads.

; http://php.net/file-uploads

file_uploads = On

; Temporary directory for HTTP uploaded files (will use system default if not

; specified).

; http://php.net/upload-tmp-dir

upload_tmp_dir = /var/tmp

; Maximum allowed size for uploaded files.

; http://php.net/upload-max-filesize

upload_max_filesize = 16M

; Maximum number of files that can be uploaded via a single request

max_file_uploads = 20

;;;;;;;;;;;;;;;;;;

; Fopen wrappers ;

;;;;;;;;;;;;;;;;;;

; Whether to allow the treatment of URLs (like http:// or ftp://) as files.

; http://php.net/allow-url-fopen

allow_url_fopen = On

; Whether to allow include/require to open URLs (like http:// or ftp://) as files.

; http://php.net/allow-url-include

allow_url_include = Off

; Define the anonymous ftp password (your email address). PHP's default setting

; for this is empty.

; http://php.net/from

;from="john@doe.com"

; Define the User-Agent string. PHP's default setting for this is empty.

; http://php.net/user-agent

;user_agent="PHP"

; Default timeout for socket based streams (seconds)

; http://php.net/default-socket-timeout

default_socket_timeout = 60

; If your scripts have to deal with files from Macintosh systems,

; or you are running on a Mac and need to deal with files from

; unix or win32 systems, setting this flag will cause PHP to

; automatically detect the EOL character in those files so that

; fgets() and file() will work regardless of the source of the file.

; http://php.net/auto-detect-line-endings

;auto_detect_line_endings = Off

;;;;;;;;;;;;;;;;;;;;;;

; Dynamic Extensions ;

;;;;;;;;;;;;;;;;;;;;;;

; If you wish to have an extension loaded automatically, use the following

; syntax:

;

; extension=modulename.extension

;

; In Mageia, we don't add the extensions in php.ini anymore, we put

; them in /etc/php.d/<number>_<name>.ini, for example 10_recode.ini.

; This is so that the RPMS can register themselves without having to

; modify the php.ini file.

;;;;;;;;;;;;;;;;;;;

; Module Settings ;

;;;;;;;;;;;;;;;;;;;

[CLI Server]

; Whether the CLI web server uses ANSI color coding in its terminal output.

cli_server.color = On

[Date]

; Defines the default timezone used by the date functions

; http://php.net/date.timezone

;date.timezone =

; http://php.net/date.default-latitude

;date.default_latitude = 31.7667

; http://php.net/date.default-longitude

;date.default_longitude = 35.2333

; http://php.net/date.sunrise-zenith

;date.sunrise_zenith = 90.583333

; http://php.net/date.sunset-zenith

;date.sunset_zenith = 90.583333

[filter]

; http://php.net/filter.default

;filter.default = unsafe_raw

; http://php.net/filter.default-flags

;filter.default_flags =

[iconv]

;iconv.input_encoding = ISO-8859-1

;iconv.internal_encoding = ISO-8859-1

;iconv.output_encoding = ISO-8859-1

[intl]

;intl.default_locale =

; This directive allows you to produce PHP errors when some error

; happens within intl functions. The value is the level of the error produced.

; Default is 0, which does not produce any errors.

;intl.error_level = E_WARNING

[sqlite]

; http://php.net/sqlite.assoc-case

;sqlite.assoc_case = 0

[sqlite3]

;sqlite3.extension_dir =

[Pcre]

;PCRE library backtracking limit.

; http://php.net/pcre.backtrack-limit

;pcre.backtrack_limit=100000

;PCRE library recursion limit.

;Please note that if you set this value to a high number you may consume all

;the available process stack and eventually crash PHP (due to reaching the

;stack size limit imposed by the Operating System).

; http://php.net/pcre.recursion-limit

;pcre.recursion_limit=100000

[Pdo]

; Whether to pool ODBC connections. Can be one of "strict", "relaxed" or "off"

; http://php.net/pdo-odbc.connection-pooling

;pdo_odbc.connection_pooling=strict

;pdo_odbc.db2_instance_name

[Pdo_mysql]

; If mysqlnd is used: Number of cache slots for the internal result set cache

; http://php.net/pdo_mysql.cache_size

pdo_mysql.cache_size = 2000

; Default socket name for local MySQL connects. If empty, uses the built-in

; MySQL defaults.

; http://php.net/pdo_mysql.default-socket

pdo_mysql.default_socket=

[Phar]

; http://php.net/phar.readonly

;phar.readonly = On

; http://php.net/phar.require-hash

;phar.require_hash = On

;phar.cache_list =

[mail function]

; For Win32 only.

; http://php.net/smtp

SMTP = localhost

; http://php.net/smtp-port

smtp_port = 25

; For Win32 only.

; http://php.net/sendmail-from

;sendmail_from = me@example.com

; For Unix only. You may supply arguments as well (default: "sendmail -t -i").

; http://php.net/sendmail-path

;sendmail_path =

; Force the addition of the specified parameters to be passed as extra parameters

; to the sendmail binary. These parameters will always replace the value of

; the 5th parameter to mail().

;mail.force_extra_parameters =

; Add X-PHP-Originating-Script: that will include uid of the script followed by the filename

mail.add_x_header = On

; The path to a log file that will log all mail() calls. Log entries include

; the full path of the script, line number, To address and headers.

;mail.log =

; Log mail to syslog (Event Log on Windows).

;mail.log = syslog

[SQL]

; http://php.net/sql.safe-mode

sql.safe_mode = Off

[ODBC]

; http://php.net/odbc.default-db

;odbc.default_db = Not yet implemented

; <a href="http://php.net/odbc.default-user" target

Répondre

Vous n'êtes pas autorisé à écrire dans cette catégorie

Notre Mission	Liens du site	Nous joindre	MLO est hébergé par
MLO est le forum francophone de la distribution Mageia et vous propose également un portail dédié aux débutants. MLO vous apporte un support sur la distribution grâce à son forum et vous offre des nouvelles de la distribution, des logiciels libres et de l'Open Source en général. Notre site a aussi pour but de vous montrer que Mageia est un système d'exploitation complet et facile à prendre en main. Vous apprendrez à installer simplement et à administrer efficacement votre système en un temps record.	Forum Documentation News du libre Mageia	Contacter MLO Mastodon MLO Flux RSS	MLO est un projet soutenu par Nos partenaires et amis
MLO est mis à disposition selon les termes de la licence Creative Commons.

gilles27 Membre non connecté

PaLmAs Membre non connecté

gilles27 Membre non connecté

PaLmAs Membre non connecté

gilles27 Membre non connecté

gilles27 Membre non connecté

gilles27 Membre non connecté