network ipv6 to ipv4 erreur

Visiteur
Visiteur
network.service - LSB: Bring up/down networking
Loaded: loaded (/etc/rc.d/init.d/network)
Active: active (running) since lun. 2014-12-15 01:46:51 CET; 5 days ago
Process: 1439 ExecStart=/etc/rc.d/init.d/network start (code=exited, status=0/SUCCESS)
CGroup: /system.slice/network.service
└─1749 /sbin/ifplugd -I -b -i wlan0
déc. 18 21:45:48 powerlinux.no-ip.org ifplugd(eth0)[1661]: client: ERREUR : [/etc/sysconfig/network-scripts/ifup-ipv6] 6to4 configuration is not valid
déc. 18 21:45:48 powerlinux.no-ip.org ifplugd(eth0)[1661]: Program executed successfully.
déc. 18 21:46:03 powerlinux.no-ip.org dhclient[12743]: DHCPREQUEST on eth0 to 192.168.100.1 port 67
déc. 18 21:46:11 powerlinux.no-ip.org dhclient[12743]: DHCPREQUEST on eth0 to 192.168.100.1 port 67
déc. 18 21:46:20 powerlinux.no-ip.org dhclient[12743]: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
déc. 18 21:46:21 powerlinux.no-ip.org dhclient[12743]: DHCPREQUEST on eth0 to 255.255.255.255 port 67
déc. 18 21:46:21 powerlinux.no-ip.org dhclient[12743]: DHCPOFFER from 172.20.130.15
déc. 18 21:46:21 powerlinux.no-ip.org dhclient[12743]: DHCPACK from 172.20.130.15
déc. 18 21:46:21 powerlinux.no-ip.org dhclient[12743]: bound to 87.231.34.63 -- renewal in 42168 seconds.
déc. 18 21:47:09 powerlinux.no-ip.org ifplugd(eth0)[1661]: Executing '/etc/ifplugd/ifplugd.action eth0 down'.
l'erreur est en rouge , si quelqu'un a une idée
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie