Forum

[ben@localhost ~]$ su

Mot de passe :

[root@localhost ben]# aticonfig.

bash: aticonfig. : commande introuvable

[root@localhost ben]# aticonfig

Usage: aticonfig [OPTION] ...

Parses an existing X-Server configuration file and modifies it to operate with

AMD products.



The following command-line options can be invoked as parameters:



AMD Initial Configuration:

--initial

Generate a default AMD device section in the configuration file which

is capable of loading the fglrx driver.

--initial=dual-head

Same as '--initial' but generate a basic dual head configuration file.

--initial=check

Identifies if the fglrx driver is present in configuration file.



TV Options:

--tvf, --tv-format-type=STRING

Change the TV signal format. STRING can be one of:

NTSC-M

NTSC-JPN

NTSC-N

PAL-B

PAL-COMB-N

PAL-D

PAL-G

PAL-H

PAL-I

PAL-K

PAL-K1

PAL-L

PAL-M

PAL-N

PAL-SECAM-D

PAL-SECAM-K

PAL-SECAM-K1

PAL-SECAM-L

Note: Not all graphics cards support every mode. Regional

settings are applicable.

--tvs, --tv-standard-type=STRING

Change the TV standard for TV output. STRING can be one of:

VIDEO

SCART

YUV

--tv-overscan={on|off}

Enable or disable overscan mode for TVout

Note, not all tv-formats support overscan. Try to

toggle overscan off before changing tv-format if

and error occurs.

--tv-info

Print out the current tv geometry, tv format, and if the

tv is physically connected.

--tv-geometry=WIDTHxHEIGHT{+|-}X{+|-}Y

=WIDTHxHEIGHT

Change the size and position of the TVout display.

WIDTH and HEIGHT are in percentage units. Please note

that the valid range for WIDTH and HEIGHT depends on

the tv-format selected. However, as a rule of thumb

WIDTH and HEIGHT are valid in the range [1,100]

X and Y are pixels offsets from centre

of the screen. X and Y are have variable ranges dependant

on ASIC. Use tv-info to get valid X and Y ranges

If tv-geometry is invoked with just width and height

then X and Y are assumed to be 0

See example 5 below for a sample usage.



FireGL Workstation Board Features:

--app, --use-app-profile=STRING

Change the application profile for a FireGL workstation board.

STRING can be one of:

default

maya

softimage-xsi

softimage-3d

houdini4.0

houdini5.0

houdini5.5

Screen-Related Options:

--ovt, --overlay-type=STRING

Change the overlay for the X server. STRING can be one of:

opengl

disable

--ovon, --overlay-on={0|1}

Choose which head the hardware overlay should be visible on. The

hardware overlay can be used for either OpenGL, video, pseudo-color

or stereo.

--lcd, --lcd-mode=STRING

Change the LCD mode. STRING can be one of:

center

full

--dtop, --desktop-setup=STRING

Change the desktop setup for multiple display adapters.

STRING can be one of:

single 1 screen, second dark

mirror 2 screens - same content, identical

refresh rate/resolution

Note: This option is NOT supported with Avivo

clone 2 screens - same content, allows for

different refresh rates/resolutions

horizontal 2 screens - one framebuffer,

screen 1 right of screen 0

horizontal,reverse 2 screens - one framebuffer,

screen 1 left of screen 0

vertical 2 screens - one framebuffer,

screen 1 above of screen 0

vertical,reverse 2 screens - one framebuffer,

screen 1 below of screen 0

Note: This option is not valid if '--initial=dual-head' is specified.

--vs, --sync-vsync={on|off}

Enable/disable sync buffer swaps with vsync. Enable this option to

prevent tearing during 3D rendering.

--psc, --pseudo-color={on|off}

Enable/disable pseudo-color visuals. Enable this option to get 16-bit

color support.

--sm, --stereo-mode={active | passive | passiveInvertHorz | passiveInvertVert | horizontalInterleave | verticalInterleave | off}

Enable/disable stereo support. Enable active option only for

applications that support the use of hardware 3D shutter glasses.

For the use of passive, passiveInvertHorz, passiveInvertVert, horizontalInterleave and verticalInterleave modes

specialized monitor equipment is required.

--resolution=Screen#,W1xH1,W2xH2,W3xH3,...

Set the modes for the specified screen. You may specify several

resolutions separated by commas.

Screens start at 0. You can use 1 for dual-head

--hsync=Screen#,LOW-HIGH

Change the horizontal sync range of the specified monitor. Make sure

you know the capabilities of your monitor before changing this option.

Screens start at 0. You can use 1 for dual-head

--vrefresh=Screen#,LOW-HIGH

Change the vertical refresh range of the specified monitor. Make sure

you know the capabilities of your monitor before changing this option.

Screens start at 0. You can use 1 for dual-head

--hsync2=LOW-HIGH

Change the horizontal sync range of the second display. Make sure you

know the capabilities of your monitor before changing this option.

--vrefresh2=LOW-HIGH

Change the vertical refresh range of the second display. Make sure you

know the capabilities of your monitor before changing this option.

--mode2=W1xH1,W2XH2,W3xH3,...

Change the modes for the second display. You may specify several

resolutions separated by commas. Only valid for clone and big desktop

settings.

--screen-layout={left|right|above|below}

Set the secondary screen position for dual head.

--screen-overlap=NUM

Set the screen overlap region in big desktop mode to be NUM pixels.

Advanced Options:

--sync-video={on|off}

Enable/disable sync to vsync for AVIVO video.

This option is enabled by default and is used to prevent

video tearing. By disabling this option video is free to

render as fast as the 3D engine can handle. In the case of

choppy video try to disable sync-video.

--tls={on|off}

Enable/disable fast thread local storage. Disable this option when

virtual machines or WineX fail to work properly.

--sb, --signal-block={on|off}

Enable/disable signal blocking. Disable this option when debugging a

multi-threaded OpenGL application.

--locked-userpages={on|off}

Enable/disable locked user pages. Disable this option if the system

hangs when running fgl_glxgears.

User page lock is no longer available on AGP system now.

--max-gart-size=VALUE1,VALUE2

Set user-defined max total GART size(VALUE1) and cacheable gart

size(VALUE2) for non-AGP systems.

This option can combined with --adapter option to set the gart size

for individual card.



Dynamic Display Management Options:

Following options will not change the config file. They are

used for querying driver, controller and adaptor information.

These options will be effective immediately. Other options on

the same command line will be ignored.

--enable-monitor=STRING,STRING

Setting current monitor to be enabled. Only 2 displays

can be enabled at the same time. Any displays

that are not on the list will be disabled.

STRING can be one of the following set, separated

by commas:

none

crt1

crt2

lvds

tv

cv

tmds1

tmds2

tmds2i

dfp3

dfp4

dfp5

dfp6

auto -- use default policy to enable the displays.

--query-monitor

This will return connected and enabled monitor information

--swap-monitor

This only works for big desktop setup. This will swap the

contents on the two monitors.

--swap-screens={on|off}

Enable/disable swap heads in dual-head mode.

This option works only in dual-head mode.



Pair mode options:

Following options are used for query add and remove pair modes.

These options will be effective immediately. Other options on

the same command line will be ignored.

--list-pairmode

list all the current existing pair modes the driver can use.

--add-pairmode=width0xheight0+width1xheight1

Add one pair mode to the list. width0 and height0 are the

size of primary display and width1 and height1 for the

secondary display.

--remove-pairmode=index

Remove one pair mode from the list. User can get index by

list-pairmode.



External Events Daemon Options:

Following options will not change the config file. They are

used to send commands to the atieventsd external events daemon.

--set-policy=STRING

Sets the event policy for the daemon to be STRING.

See the atieventsd(8) manpage for further details.



Display attribute options:

Following options are used for query and set adjustment of

specific attribute for specific display. These options will be

effective immediately. Other options on the same command line

will be ignored.

The DISPLAYTYPE in options can be one of the following strings:

crt1, lvds, tv, cv, tmds1, crt2,

tmds2, tmds2i, dfp3, dfp4, dfp5, dfp6 .

The ATTRIBTYPE in options can be one of the following strings:

brightness, contrast, saturation, hue, positionX,

positionY, sizeX, sizeY, overscan, videoStandard

--query-dispattrib=DISPLAYTYPE,ATTRIBTYPE

query the specific adjustment info of the specific display.

if ATTRIBTYPE is not specified, all supported attribute

information will be printed out.

--set-dispattrib=DISPLAYTYPE,ATTRIBTYPE:VALUE

set the attribute value of the specific display.



Connector type options:

Following options are used for query connector type

for specific display. These options will be

effective immediately. Other options on the same command line

will be ignored.

The DISPLAYTYPE in options can be one of the following strings:

crt1, lvds, tv, cv, tmds1, crt2,

tmds2, tmds2i, dfp3, dfp4, dfp5, dfp6 .

--query-connectortype=DISPLAYTYPE

query the connector type of the specific display.



Component video dongle options:

Following options are used for query and set dongles for a

component video. These options will be effective immediately.

Other options on the same command line will be ignored.

--query-cvdongle

query dongle setting informations of the component video.

--set-cvdongle=VALUE

set the custom override value of the CV dongle.

--reset-cvdongle

reset the custom override setting(to zero)of the CV dongle.



Component video customized mode options:

Following options are used for query and set customized mode for

component video. These options will be effective immediately.

Other options on the same command line will be ignored.

--query-cvmode

query customized modes for component video.

--add-cvmode=WIDTH,HEIGHT,FLAGS,BASEWIDTH,BASEDHEIGHT,REFRESH.

add a customized mode for component video.

--validate-cvmode=WIDTH,HEIGHT,FLAGS,BASEWIDTH,BASEHEIGHT,REFRESH.

validate a customized mode for component video.

--delete-cvmode=INDEX

delete one customized mode for component video.



Persistent Configuration Store (PCS) Options:

Following options will not change the config file. They are

used to manipulate the PCS database. Due to their nature, these.

commands may only be run by the root user. Note that the prefix

and key names are not case-sensitive.

--get-pcs-key=PREFIX,KEY

Prints out the specified prefix and key from the PCS

database. The type of data will be shown along with

the contents.

--set-pcs-u32=PREFIX,KEY,VALUE

--set-pcs-val=PREFIX,KEY,VALUE (deprecated)

Sets an integer value at the specified prefix and key in

the PCS database. The value may be specified in hex by

prefixing it with 0x or in octal by prefixing it with 0,

otherwise the value is assumed to be in decimal. Note

that --set-pcs-val is deprecated and --set-pcs-u32 should

be used instead. --set-pcs-val will be removed soon.

--set-pcs-u32array=PREFIX,KEY,VALUE[,VALUE]...

Sets an array of integer values at the specified prefix

and key in the PCS database. The values may be specified

in hex by prefixing it with 0x or in octal by prefixing

it with 0, otherwise the value is assumed to be in decimal.

(e.g. --set-pcs-u32array="TestSection,TestData,1,0x2,3")

--set-pcs-str=PREFIX,KEY,STRING

Sets a string value at the specified prefix and key in

the PCS database.

--set-pcs-raw=PREFIX,KEY,HEXSTRING

Sets a raw binary value at the specified prefix and key in

the PCS database. The value is specified as a series of

hex bytes with no 0x or spaces.

(e.g. --set-pcs-raw="TestSection,TestData,E84C0E" sets 3 bytes)

--set-pcs-bool=PREFIX,KEY,VALUE

Sets a boolean value at the specified prefix and key in

the PCS database. The value may be specified as either

"true", "yes", "on", "enable" or "1" meaning boolean TRUE or

"false", "no", "off", "disable" or "0" meaning boolean FALSE.

--del-pcs-key=PREFIX,KEY

Deletes the specified prefix and key from the PCS database.



Multiple display adapter options:

Following options are used for querying and setting up multiple

display adapters that are installed for multihead or Crossfire

configurations.

--lsa, --list-adapters

Lists all detected and supported display adapters.

The default adapter (used when --adapter is not specified)

will be indicated with a "*" next to it.

--adapter=ADAPTERLIST

Selects which adapters returned by --list-adapters should

be affected by other aticonfig options. ADAPTERLIST contains

either a comma-seperated sequence of the index numbers of the

adapters to be affected or else contains the keyword "all" to

select all the adapters. If --adapter is missing, only the

default adapter will be affected.

--lscc, --list-crossfire-candidates

Queries the driver to determine the pool of available devices that can

can be chained together for CrossFire.

--lscs, --list-crossfire-status

List current Crossfire status (enabled or disabled) along with diagnostics

information indicates the status of your system

--lsch, --list-crossfire-chains

Lists the CrossFire chains that are currently defined along with their

enabled state

--cfa, --add-crossfire-chain

Defines a new CrossFire chain. --adapter should contain the adapter

chain definition, with the master adapter being the first entry and

the slave adapters being the subsequent entries in order of priority.

--cfd, --delete-crossfire-chain

Delete and existing defined CrossFire chain. --adapter should list the

master adapters of the chains to be deleted. --adapter=all will delete

all chain definitions.

--cf, --crossfire={on|off}

Enables/disables CrossFire support on the currently defined CrossFire

chains. --adapter should list the master adapters to be enabled or

disabled.

--cfl, --crossfire-logo={on|off}

Enables/disables the appearance of the CrossFire Logo when rendering

in CrossFire mode



AMD Overdrive (TM) options:

The following options are used to get and set current and peak, core

and memory clock information as well as read the current temperature of

adapters. By using the "--adapter=" argument the AMD Overdrive (TM)

options can be targeted to a particular adapter in a multi-adapter scenario.

If no adapter is explicitly targeted the commands will be run on the Default

adapter as indicated by the "--list-adapters" command

--od-enable

Unlocks the ability to change core or memory clock values by

acknowledging that you have read and understood the AMD Overdrive (TM)

disclaimer and accept responsibility for and recognize the potential

dangers posed to your hardware by changing the default core or memory

clocks

--od-disable

Disables AMD Overdrive(TM) set related aticonfig options. Previously

commited core and memory clock values will remain, but will not be set

on X Server restart.

--odgc, --od-getclocks

Lists various information regarding current core and memory clock

settings.

Including: current and peak clocks

the theoretical range clocks can be set to

the current load on the GPU

--odsc, --od-setclocks={NewCoreClock|0,NewMemoryClock|0}

Sets the core and memory clock to the values specified in MHz

The new clock values must be within the theoretical ranges provided

by --od-getclocks. If a 0 is passed as either the NewCoreClock or

NewMemoryClock it will retain the previous value and not be changed.

There is no guarantee that the attempted clock values will succeed

even if they lay inside the theoretical range. These newly set

clock values will revert to the default values if they are not

committed using the "--od-commitclocks" command before X is

restarted

--odrd, --od-restoredefaultclocks

Sets the core and memory clock to the default values.

Warning X needs to be restarted before these clock changes will take

effect

--odcc, --od-commitclocks

Once the stability of a new set of custom clocks has been proven this

command will ensure that the Adapter will attempt to run at these new

values whenever X is restarted

--odgt, --od-gettemperature

Returns the temperature reported by any thermal sensors available on

the adapter.



ACPI Options:

--acpi-services=on|off

Enable/disable ACPI services. In the case of BIOS or kernel ACPI issues,

ACPI services in the driver can be disabled through this option.

The ACPI services are enabled by default.

--acpi-display-switch=on|off

Enable/disable display switching with ACPI methods on mobile platforms.

This option is enabled by default.



Genlock/Framelock options:

The following options are used to control operation with GLSYNC module

in the system. By using the "--adapter=" argument --glsync-getconfig,

--glsync-setconfig, --glsync-getgenlock, --glsync-setgenlock options

can be targeted to a particular adapter in a multi-adapter scenario.

If no adapter is explicitly targeted the commands will be run on the Default

adapter as indicated by the "--list-adapters" command

--glsync-getport={RJ45_1 | RJ45_2 | BNC}

Get configuration state for specified GLSync port.

Including: Number of LEDs

Scanned frequency

Signal Source for RJ45 port if it is configured as output

Port state (Input or Output) for RJ45 port

Signal type for BNC port

--glsync-setport=port_type,cntl,sig_src

Set configuration for specified GLSync port

Parameters: port_type - RJ45_1 or RJ45_2

only RJ45 ports can be configured

cntl - 0 if port is configured as input or

1 if port is configured as output

sig_src - signal source for GL Sync port

if 0-3 - GPU port index

if RJ45_1, RJ45_2 or BNC - another GL Sync port

if -1 - signal source is undefined

--glsync-getconfig

Get timing configuration for particular GL Sync connector

Including: Sync Delay in ms

Signal Source

Sample Rate

Sync field

Trigger Edge

Scan Rate multiplier

GPU port index this adapter connected to

--glsync-setconfig=delay,fr_cntl,sig_src,smpl_rate,fld,edge,coef

Set timing configuration for GL Sync connector

Parameters: delay - Sync Delay in ms

fr_cntl - Enable/Disable framlock control

0 Disable Framelock

1 Enable Framelock

sig_src - Signal Source for this adapter.

if 0-3 - GPU port index.

It can not be GPU port index of this adapter

if RJ45_1, RJ45_2 or BNC - GL Sync port

if -1 - signal source is undefined

smpl_rate - Sample Rate for sampled sync signal.

0 for no sampling

fld - Sync field for interlaced sync signal.

0 if sync field is undefined

1 if synced to both field

2 if synced to field 1

edge - it is defined which signal edge

should trigger synchronization

0 if edge is undefined

1 if it is triggered by raising edge

2 if it is triggered by falling edge

3 if it is triggered by both edges

coef - Scan Rate multiplier applied to sync signal

0 if coef is undefined

1 if coef is 5

2 if coef is 4

3 if coef is 3

4 if coef is 2.5

5 if coef is 2

6 if coef is 1.33

7 if coef is 1.25

8 if coef is 1.

9 if coef is 0.8

10 if coef is 0.67

11 if coef is 0,5

12 if coef is 0.4

13 if coef is 0.33

14 if coef is 0.25

15 if coef is 0.2

Note: Some parameters may not be valid for manual configuration.

Please use --glsync-getconfig command to verify.

--glsync-getgenlock=disp_type

Get genlock mode for particular display

disp_type - Display Type. When RandR 1.2 and above is enabled

can be query by using xrandr -q command.

If RandR 1.2 is not enabled

aticonfig --query-monitor command should be used

to query this parameter

--glsync-setgenlock=disp_type,mode,timing_server

Set genlock mode for particular display

Parameters: disp_type - Display Type.

When RandR 1.2 and above is enabled

can be query by using xrandr -q command.

If RandR 1.2 is not enabled

aticonfig --query-monitor command

should be used to query this parameter.

mode - Enable/Disable Genlock

0 Disable Genlock

1 Enable Genlock

timing_server - Enable/Disable timing server

0 to configure display as free run

1 to configure display as a timing server

--glsync-restart

Reinitialized all genlock settings after power down system



X Server Options:

--xinerama={on|off}

Enable/disable Xinerama (MultiView) in the X Server configuration file.

MultiView allows for the merging of independent desktop heads into a

unified workspace allowing windows to freely cross X Screen boundaries.



Uninstall options:

--uninstall{=force|dryrun}

dryrun tests uninstall but does not uninstall.

force removes all installed files without verification.

Uninstall without an option tries to perform the default uninstall procedure.



Miscellaneous Options:

-v, --verbose

Show what aticonfig is doing.

-q, --quiet

Disable all information output except for errors.

--effective={now,startup}

Choose when the requested changes should take effect.

now: Immediately. This change will affect the running X

session if applicable. Only 'set-powerstate' and

'overlay-on' are applicable for now.

startup: On future X server startups. This change will modify the

X server configuration file if applicable.

The default is 'now,startup', i.e., do both as applicable.

--nobackup

Do not make an automatic backup of the configuration file.

-i, --input=FILE

Select a FILE to input as the configuration file. Set FILE to '-' to

pipe from standard input. Without this option, aticonfig will search

/etc/X11 for the default configuration file.

-o, --output=FILE

Select a FILE to output the new configuration file to. Set FILE to '-'

to print to standard output. Without this option, aticonfig will

replace the input file with the newly generated file.

-h, --help

Display this help screen.

-f, --force

Only valid with 'initial' option. Force aticonfig to generate default

Monitor, Device, and Screen sections even if the original configuration

file has invalid settings in these sections.



Composite options:

--xv-pixmap-buffer-type=gartcacheable

Allocate pixmap buffer from GART cacheable heap.

--xv-pixmap-buffer-type=lfb

Allocate pixmap buffer from local framebuffer.

--xv-pixmap-buffer-type=gartuswc

Allocate pixmap buffer from GART USWC heap.



PowerXpress options:

--px-list-active-gpu

--pxl

List current activated GPU

--px-dgpu

Activate discrete GPU (High-Performance mode), must re-start X to take effect

--px-igpu

Activate integrated GPU (Power-Saving mode), must re-start X to take effect



Examples:

1. Setting up fglrx for the first time.

Single head : aticonfig --initial --input=/etc/X11/xorg.conf

Dual head : aticonfig --initial=dual-head --screen-layout=above

This command will generate a dual head configuration

file with the second screen located above the first

screen.

Multi head : aticonfig --initial --heads=4 --adapter=1

This command will generate 4 adjacent X Screens

on adapter 1. Use with -f to reduce previously configured heads.

2. Setting up big desktop to horizontal and set overlay on secondary display.

aticonfig --dtop=horizontal --overlay-on=1

3. Setting up modes for primary display.

aticonfig --resolution=0,1600x1200,1280x1024,1024x768

4. Change tv geometry

aticonfig --tv-geometry=85x90+10-10

This will set tv to 85% width (where 100% ==

overscan) 90% height and shift 10 pixels right of centre

and 10 pixels down of centre.

5. Multiple display adapters.

List adapters : aticonfig --list-adapters

Init 0 and 2 : aticonfig --adapter=0,2 --initial

Init all : aticonfig --adapter=all --initial

MultiView : aticonfig --xinerama=on

6. AMD Overdrive (TM).

List adapters : aticonfig --list-adapters

Get Clocks of 0 : aticonfig --adapter=0 --od-getclocks

Set new Clocks for 0 : aticonfig --adapter=0 --od-setclocks=770,1126

Test out 3D : atiode -P60 -H localhost:0; echo $?

Check Temperature of 0 : aticonfig --adapter=0 --od-gettemperature

Commit changes for 0 : aticonfig --adapter=0 --od-commitclocks



***note***

atiode is a stress application you start with a required

parameter -P which specifies the test duration and the optional

-H parameter to target a specific display to use. For example

atiode -P 600 -H localhost:0 would test display 0 for 10 minutes

the return code from the application is the test result

0: Test successfully completed.

1: Invalid command-line parameters.

2: Test failed because of rendering errors.

3: Target adapter not found.

4: Test aborted due to unknown reason



7. Framelock/Genlock with GL Sync module

Set GL Sync connector parameters for particular adapter:

aticonfig --glsync-setconfig=0,0,2,0.0,3,8 --adapter=1

Enable Genlock for particular display:

aticonfig --glsync-setgenlock=lvds,1,0 --adapter=1

Enable Timing Master:

aticonfig --glsync-setgenlock=dfp3,0,1 --adapter=1

Verify if the frequency is locked for particular display:

aticonfig --glsync-getgenlock=crt1 --adapter=1

Set GL Sync output port RJ45_1:

aticonfig --glsync-setport=RJ45_1,1,BNC

Reinitialize all genlock settings for all displays and adapters:

aticonfig --glsync-restart



Please report bugs to http://support.amd.com

[root@localhost ben]# glsync-restart

bash: glsync-restart : commande introuvable

[root@localhost ben]# --glsync-restart

bash: --glsync-restart : commande introuvable

[root@localhost ben]# h

bash: h : commande introuvable

[root@localhost ben]# -h

bash: -h : commande introuvable

[root@localhost ben]# --initial=check

bash: --initial=check : commande introuvable

[root@localhost ben]# initial=check

[root@localhost ben]# initial=dual-head

[root@localhost ben]# initial=check

[root@localhost ben]# initial

bash: initial : commande introuvable

[root@localhost ben]#

[root@localhost ben]# lsmod

Module Size Used by

nls_iso8859_1 12713 1

nls_cp437 16991 1

vfat 21525 1

fat 61126 1 vfat

fuse 78478 3

uas 17815 0

usb_storage 57543 1

ipt_LOG 17089 4

xt_time 12661 0

xt_connlimit 12716 0

xt_helper 12583 0

xt_realm 12498 0

xt_NFQUEUE 12659 0

xt_tcpmss 12501 0

xt_tcpudp 12884 11

ipt_addrtype 12599 2

xt_pkttype 12504 0

xt_set 13099 2

ip_set_hash_ip 32007 2

ip_set 40225 2 xt_set,ip_set_hash_ip

nfnetlink 14327 1 ip_set

iptable_raw 12678 0

xt_TPROXY 17327 0

nf_tproxy_core 12610 1 xt_TPROXY,[permanent]

ip6_tables 27347 1 xt_TPROXY

nf_defrag_ipv6 18272 1 xt_TPROXY

xt_CLASSIFY 12507 0

xt_mark 12563 1

xt_hashlimit 17533 0

xt_comment 12504 18

ipt_REJECT 12541 4

xt_length 12536 0

xt_connmark 12755 0

xt_owner 12498 0

xt_recent 18393 0

xt_iprange 12662 0

xt_physdev 12587 0

xt_policy 12582 0

xt_multiport 12798 4

iptable_mangle 12695 1

iptable_nat 13383 0

nf_nat 26181 1 iptable_nat

nf_conntrack_ipv4 20034 11 iptable_nat,nf_nat

nf_defrag_ipv4 12729 2 xt_TPROXY,nf_conntrack_ipv4

xt_conntrack 12728 8

nf_conntrack 91480 7 xt_connlimit,xt_helper,xt_connmark,iptable_nat,nf_nat,nf_conntrack_ipv4,xt_conntrack

iptable_filter 12810 1

ip_tables 27201 4 iptable_raw,iptable_mangle,iptable_nat,iptable_filter

x_tables 33794 32 ipt_LOG,xt_time,xt_connlimit,xt_helper,xt_realm,xt_NFQUEUE,xt_tcpmss,xt_tcpudp,ipt_addrtype,xt_pkttype,xt_set,iptable_raw,xt_TPROXY,ip6_tables,xt_CLASSIFY,xt_mark,xt_hashlimit,xt_comment,ipt_REJECT,xt_length,xt_connmark,xt_owner,xt_recent,xt_iprange,xt_physdev,xt_policy,xt_multiport,iptable_mangle,iptable_nat,xt_conntrack,iptable_filter,ip_tables

af_packet 26571 2

ipv6 331954 34 xt_TPROXY,nf_defrag_ipv6

snd_hda_codec_hdmi 32044 1

snd_hda_codec_realtek 349322 1

snd_hda_intel 32922 2

snd_hda_codec 103315 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel

snd_hwdep 13604 1 snd_hda_codec

snd_seq_dummy 12798 0

snd_seq_oss 38254 0

snd_seq_midi_event 14899 1 snd_seq_oss

snd_seq 65527 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event

snd_seq_device 14498 3 snd_seq_dummy,snd_seq_oss,snd_seq

snd_pcm_oss 53807 0

snd_pcm 100345 4 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec,snd_pcm_oss

snd_timer 29395 2 snd_seq,snd_pcm

snd_mixer_oss 22315 1 snd_pcm_oss

snd 81625 17 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_seq_dummy,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss

soundcore 15094 1 snd

i2c_piix4 13694 0

i2c_core 39771 1 i2c_piix4

sp5100_tco 13697 0

snd_page_alloc 18484 2 snd_hda_intel,snd_pcm

r8169 55797 0

sg 36452 0

sr_mod 22258 0

mii 13893 1 r8169

firewire_ohci 39903 0

firewire_core 62218 1 firewire_ohci

crc_itu_t 12707 1 firewire_core

serio_raw 13166 0

binfmt_misc 17456 1

cpufreq_ondemand 19321 0

cpufreq_conservative 19774 0

cpufreq_powersave 12538 0

powernow_k8 17941 0

freq_table 14143 2 cpufreq_ondemand,powernow_k8

mperf 12667 1 powernow_k8

dm_mod 77693 0

fglrx 3129162 3

joydev 17412 0

ppdev 17635 0

parport_pc 41438 0

parport 42243 2 ppdev,parport_pc

floppy 69505 0

processor 31102 1 powernow_k8

button 14041 1 fglrx

wmi 19070 0

edac_core 53600 0

k10temp 13119 0

evdev 17748 9

pata_atiixp 13165 0

ata_piix 30755 0

ahci 25854 4

libahci 26563 1 ahci

libata 218441 4 pata_atiixp,ata_piix,ahci,libahci

sd_mod 40492 5

scsi_mod 217808 6 uas,usb_storage,sg,sr_mod,libata,sd_mod

crc_t10dif 12563 1 sd_mod

ext4 370531 2

jbd2 87017 1 ext4

crc16 12675 1 ext4

uhci_hcd 31816 0

ohci_hcd 37486 0

ehci_hcd 60818 0

hid_logitech 17584 0

ff_memless 13573 1 hid_logitech

usbhid 48540 1 hid_logitech

hid 90763 2 hid_logitech,usbhid

usbcore 200876 7 uas,usb_storage,uhci_hcd,ohci_hcd,ehci_hcd,usbhid

[root@localhost ben]#