Erreur pour monter un téléphone samsung wave 2 [Réglé]
Impossible d'accéder au téléphone
Système et matériels / Autres matériels et périphériques
NESTO Membre non connecté
-
- Voir le profil du membre NESTO
- Inscrit le : 04/03/2010
- Groupes :
J'ai offert un téléphone à la mode à ma femme : un Samsung Wave II
Je savais que ça n'allait pas le faire sous Linux mais bon je me suis dis qu'au pire, elle pourra au moins le brancher en USB pour qu'elle est accès à sa mini cardsd comme n'importe quel périphérique de stockage.
Oh surprise lors que le téléphone est branché (en USB) voici l'erreur que cela m'affiche :
Citation :
Impossible de Monter Wave II
Erreur lors de l'initialisation de l'appareil photo : -1: Erreur indéfinie
Erreur lors de l'initialisation de l'appareil photo : -1: Erreur indéfinie
Dans le centre de contrôle, le matériel en question est détecté en tant qu' inconnus et autres.
C'est d'autant plus rageant que sur d'autres distributions (Ubuntu en Live) on a accès aux fichiers stockés dans le téléphone comme je le pensais.
Alors j'ai virtualisé un windows sous Virtual box pour que ma femme puisse utiliser le téléphone avec le logiciel de chez Samsung.
Mais puisque Mageia ne peut pas monter le téléphone je ne peux rien faire non plus du côté de Virtual box.
Comprenez-vous ?
Donc, il y a t-il une solution ?
Merci pour votre aide.
XKomodor Membre non connecté
-
- Voir le profil du membre XKomodor
- Inscrit le : 08/01/2008
- Site internet
- Groupes :
-
Administrateur
Tu pourrais faire en root et dans une console :
dmesg
puis
cat /var/log/messages
Pour voir ce que peut dire Mageia lorsque tu le plug ?
Merci
NESTO Membre non connecté
-
- Voir le profil du membre NESTO
- Inscrit le : 04/03/2010
- Groupes :
Voici le résultat à la commande dmesg :
Caché :
pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:03: resource 2 [mem 0xf0c00000-0xf0dfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:07: resource 9 [mem 0xfc000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5008k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800dbc00000 - ffff8800dfc00000
software IO TLB at phys 0xdbc00000 - 0xdfc00000
audit: initializing netlink socket (disabled)
type=2000 audit(1320864273.444:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7921
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 1875k, total 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
PM: Checking hibernation image partition UUID=79bb7e46-5fb2-4af6-85f4-b698819845ef
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 3:301:746
rtc_cmos 00:03: setting system clock to 2011-11-09 18:44:34 UTC (1320864274)
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
Freeing unused kernel memory: 724k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 8k freed
Freeing unused kernel memory: 80k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Refined TSC clocksource calibration: 2808.714 MHz.
Switching to clocksource tsc
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7bfe000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.8-desktop-6.mga ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7bfd000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.8-desktop-6.mga ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21
ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21
ata_piix 0000:00:1f.5: PCI INT D -> GSI 21 (level, low) -> IRQ 21
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
usb 1-1: new high speed USB device using ehci_hcd and address 2
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max UDMA/133
ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.2: new high speed USB device using ehci_hcd and address 3
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: HPA detected: current 1953523055, native 1953525168
ata2.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
ata2.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: ATAPI: PLEXTOR DVDR PX-820SA, 1.01, max UDMA/100
ata2.00: configured for UDMA/133
ata2.01: configured for UDMA/100
ata1.00: HPA detected: current 321670847, native 321672960
ata1.00: ATA-6: HDS722516VLSA80, V34OA6MA, max UDMA/100
ata1.00: 321670847 sectors, multi 16: LBA48
ata1.01: HPA detected: current 321670847, native 321672960
ata1.01: ATA-6: HDS722516VLSA80, V34OA6MA, max UDMA/100
ata1.01: 321670847 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HDS722516VLSA80 V34O PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA HDS722516VLSA80 V34O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 321670847 512-byte logical blocks: (164 GB/153 GiB)
sd 0:0:1:0: [sdb] 321670847 512-byte logical blocks: (164 GB/153 GiB)
scsi 1:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:1:0: CD-ROM PLEXTOR DVDR PX-820SA 1.01 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdc] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA WDC WD6400AAKS-2 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdd] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 2:0:0:0: [sdd] Write Protect is off
sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sdc: sdc1
sd 1:0:0:0: [sdc] Attached SCSI disk
sdd: sdd1 sdd2 < sdd5 sdd6 >
sd 2:0:0:0: [sdd] Attached SCSI disk
sdb: sdb1 sdb2 < sdb5 sdb6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] Attached SCSI disk
ahci 0000:03:00.0: version 3.0
ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi4 : ahci
scsi5 : ahci
ata5: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe100 irq 18
ata6: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe180 irq 18
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
pata_acpi 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pata_acpi 0000:03:00.1: setting latency timer to 64
pata_acpi 0000:03:00.1: PCI INT B disabled
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi6 : pata_jmicron
scsi7 : pata_jmicron
ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
CE: hpet5 increased min_delta_ns to 7500 nsec
CE: hpet5 increased min_delta_ns to 11250 nsec
hrtimer: interrupt took 3256 ns
usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0151
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: USB2.0-CRW
usb 1-1.2: Manufacturer: Generic
usb 1-1.2: SerialNumber: 20060413092100000
usb 2-1.6: new full speed USB device using ehci_hcd and address 3
usb 2-1.6: New USB device found, idVendor=046d, idProduct=c068
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: Product: G500
usb 2-1.6: Manufacturer: Logitech
usb 2-1.6: SerialNumber: BAC05033E40018
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input0
generic-usb 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.0-1.6/input0
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input1
generic-usb 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.0-1.6/input1
usb 2-1.8: new low speed USB device using ehci_hcd and address 4
usb 2-1.8: New USB device found, idVendor=046d, idProduct=c30e
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8: Product: HID compliant keyboard
usb 2-1.8: Manufacturer: Logitech
input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input2
generic-usb 0003:046D:C30E.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1.8/input0
input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input3
generic-usb 0003:046D:C30E.0004: input,hidraw3: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1.8/input1
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: acl
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
CE: hpet3 increased min_delta_ns to 7500 nsec
CE: hpet3 increased min_delta_ns to 11250 nsec
udev[133]: starting version 166
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ATK0110 ATK0110:00: EC enabled
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
ACPI: acpi_idle yielding to intel_idle
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
Linux video capture interface: v2.00
[fglrx] Maximum main memory to use for locked dma buffers: 3799 MBytes.
[fglrx] vendor: 1002 device: 9442 count: 1
[fglrx] ioport: bar 4, base 0xb000, size: 0x100
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
saa7130/34: v4l2 driver version 0.2.16 loaded
saa7134 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
saa7133[0]: found at 0000:07:01.0, rev: 209, irq: 16, latency: 64, mmio: 0xf7fff800
saa7133[0]: subsystem: 1461:f01d, board: Avermedia Super 007 [card=117,autodetected]
saa7133[0]: board init: gpio is 40000
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 250
IR LIRC bridge handler initialized
saa7133[0]: i2c eeprom 00: 61 14 1d f0 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 55 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 02 15 16 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
EXT4-fs (sdd1): re-mounted. Opts: acl
tuner 0-004b: chip found @ 0x96 (saa7133[0])
tda829x 0-004b: setting tuner address to 60
tda829x 0-004b: type set to tda8290+75a
EXT4-fs (sdd6): mounted filesystem with ordered data mode. Opts: acl
fuse init (API version 7.16)
saa7133[0]: dsp access error
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
dvb_init() allocating 1 frontend
DVB: registering new adapter (saa7133[0])
DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
vboxguest: VirtualBox Guest PCI device not found.
Adding 4088504k swap on /dev/sdd5. Priority:-1 extents:1 across:4088504k
tda1004x: found firmware revision 0 -- invalid
tda1004x: trying to boot from eeprom
tda1004x: found firmware revision 0 -- invalid
tda1004x: waiting for firmware upload...
tda1004x: no firmware upload (timeout or file not found?)
tda1004x: firmware upload failed
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xf7fff800 irq 16 registered as card -1
fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1239
[fglrx] Firegl kernel thread PID: 1240
[fglrx] Firegl kernel thread PID: 1241
[fglrx] IRQ 45 Enabled
[fglrx] Gart USWC size:1240 M.
[fglrx] Gart cacheable size:491 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
[fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
CE: hpet4 increased min_delta_ns to 7500 nsec
CE: hpet4 increased min_delta_ns to 11250 nsec
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
ata1: EH complete
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
ata1: EH complete
ata2.00: configured for UDMA/133
ata2.01: configured for UDMA/100
ata2: EH complete
ata3.00: configured for UDMA/133
ata3: EH complete
EXT4-fs (sdd1): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd6): re-mounted. Opts: acl,commit=0
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 47 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc9000671a000, 20:cf:30:1b:d8:6e, XID 083000c0 IRQ 47
autoconfig: line_outs=4 (0x24/0x25/0x26/0x27/0x0)
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x2d/0x2e
inputs:
hda-codec: no NID for mapping control Independent HP:0:0
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: irq 48 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
firewire_ohci 0000:07:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: Attached scsi generic sg2 type 0
sr 1:0:1:0: Attached scsi generic sg3 type 5
sd 2:0:0:0: Attached scsi generic sg4 type 0
firewire_ohci: Added fw-ohci device 0000:07:04.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
Initializing USB Mass Storage driver...
scsi8 : usb-storage 1-1.2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver uas
firewire_core: created device fw0: GUID 001e8c0000dbb635, S400
scsi 8:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg5 type 0
scsi 8:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:1: Attached scsi generic sg6 type 0
scsi 8:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:2: Attached scsi generic sg7 type 0
scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:3: Attached scsi generic sg8 type 0
sd 8:0:0:2: [sdg] Attached SCSI removable disk
sd 8:0:0:0: [sde] Attached SCSI removable disk
sd 8:0:0:1: [sdf] Attached SCSI removable disk
sd 8:0:0:3: [sdh] Attached SCSI removable disk
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x216 offMax=0xc5d
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.14_OSE (interface 0x00180000).
NET: Registered protocol family 10
r8169 0000:02:00.0: eth0: unable to apply firmware patch rtl_nic/rtl8168d-2.fw
r8169 0000:02:00.0: eth0: link down
r8169 0000:02:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:02:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NET: Registered protocol family 17
hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
xt_time: kernel timezone is +0100
IFWLOG: register target
eth0: no IPv6 routers present
usb 1-1.6: new high speed USB device using ehci_hcd and address 4
usb 1-1.6: New USB device found, idVendor=090c, idProduct=1000
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: Flash Disk
usb 1-1.6: SerialNumber: AA04012700015834
scsi9 : usb-storage 1-1.6:1.0
scsi 9:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
sd 9:0:0:0: Attached scsi generic sg9 type 0
sd 9:0:0:0: [sdi] 1981440 512-byte logical blocks: (1.01 GB/967 MiB)
sd 9:0:0:0: [sdi] Write Protect is off
sd 9:0:0:0: [sdi] Mode Sense: 43 00 00 00
sd 9:0:0:0: [sdi] Assuming drive cache: write through
sd 9:0:0:0: [sdi] Assuming drive cache: write through
sdi: sdi1
sd 9:0:0:0: [sdi] Assuming drive cache: write through
sd 9:0:0:0: [sdi] Attached SCSI disk
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[fglrx] IRQ 45 Disabled
fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 4202
[fglrx] Firegl kernel thread PID: 4203
[fglrx] Firegl kernel thread PID: 4204
[fglrx] IRQ 45 Enabled
[fglrx] Gart USWC size:1240 M.
[fglrx] Gart cacheable size:491 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
[fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
usb 1-1.6: USB disconnect, address 4
[fglrx] IRQ 45 Disabled
fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 13765
[fglrx] Firegl kernel thread PID: 13766
[fglrx] Firegl kernel thread PID: 13767
[fglrx] IRQ 45 Enabled
[fglrx] Gart USWC size:1240 M.
[fglrx] Gart cacheable size:491 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
[fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
[fglrx] IRQ 45 Disabled
fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 14414
[fglrx] Firegl kernel thread PID: 14415
[fglrx] Firegl kernel thread PID: 14416
[fglrx] IRQ 45 Enabled
[fglrx] Gart USWC size:1240 M.
[fglrx] Gart cacheable size:491 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
[fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
usb 1-1.6: new high speed USB device using ehci_hcd and address 5
usb 1-1.6: New USB device found, idVendor=090c, idProduct=1000
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: Flash Disk
usb 1-1.6: SerialNumber: AA04012700015834
scsi10 : usb-storage 1-1.6:1.0
scsi 10:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
sd 10:0:0:0: Attached scsi generic sg9 type 0
sd 10:0:0:0: [sdi] 1981440 512-byte logical blocks: (1.01 GB/967 MiB)
sd 10:0:0:0: [sdi] Write Protect is off
sd 10:0:0:0: [sdi] Mode Sense: 43 00 00 00
sd 10:0:0:0: [sdi] Assuming drive cache: write through
sd 10:0:0:0: [sdi] Assuming drive cache: write through
sdi: sdi1
sd 10:0:0:0: [sdi] Assuming drive cache: write through
sd 10:0:0:0: [sdi] Attached SCSI disk
WARNING! power/level is deprecated; use power/control instead
usb 1-1.6: USB disconnect, address 5
pci_bus 0000:03: resource 2 [mem 0xf0c00000-0xf0dfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:07: resource 9 [mem 0xfc000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5008k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800dbc00000 - ffff8800dfc00000
software IO TLB at phys 0xdbc00000 - 0xdfc00000
audit: initializing netlink socket (disabled)
type=2000 audit(1320864273.444:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7921
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 1875k, total 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
PM: Checking hibernation image partition UUID=79bb7e46-5fb2-4af6-85f4-b698819845ef
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 3:301:746
rtc_cmos 00:03: setting system clock to 2011-11-09 18:44:34 UTC (1320864274)
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
Freeing unused kernel memory: 724k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 8k freed
Freeing unused kernel memory: 80k freed
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Refined TSC clocksource calibration: 2808.714 MHz.
Switching to clocksource tsc
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7bfe000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.8-desktop-6.mga ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7bfd000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.8-desktop-6.mga ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21
ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21
ata_piix 0000:00:1f.5: PCI INT D -> GSI 21 (level, low) -> IRQ 21
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
usb 1-1: new high speed USB device using ehci_hcd and address 2
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max UDMA/133
ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.2: new high speed USB device using ehci_hcd and address 3
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: HPA detected: current 1953523055, native 1953525168
ata2.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
ata2.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: ATAPI: PLEXTOR DVDR PX-820SA, 1.01, max UDMA/100
ata2.00: configured for UDMA/133
ata2.01: configured for UDMA/100
ata1.00: HPA detected: current 321670847, native 321672960
ata1.00: ATA-6: HDS722516VLSA80, V34OA6MA, max UDMA/100
ata1.00: 321670847 sectors, multi 16: LBA48
ata1.01: HPA detected: current 321670847, native 321672960
ata1.01: ATA-6: HDS722516VLSA80, V34OA6MA, max UDMA/100
ata1.01: 321670847 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HDS722516VLSA80 V34O PQ: 0 ANSI: 5
scsi 0:0:1:0: Direct-Access ATA HDS722516VLSA80 V34O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 321670847 512-byte logical blocks: (164 GB/153 GiB)
sd 0:0:1:0: [sdb] 321670847 512-byte logical blocks: (164 GB/153 GiB)
scsi 1:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:1:0: CD-ROM PLEXTOR DVDR PX-820SA 1.01 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdc] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA WDC WD6400AAKS-2 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdd] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 2:0:0:0: [sdd] Write Protect is off
sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sdc: sdc1
sd 1:0:0:0: [sdc] Attached SCSI disk
sdd: sdd1 sdd2 < sdd5 sdd6 >
sd 2:0:0:0: [sdd] Attached SCSI disk
sdb: sdb1 sdb2 < sdb5 sdb6 >
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:1:0: [sdb] Attached SCSI disk
ahci 0000:03:00.0: version 3.0
ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi4 : ahci
scsi5 : ahci
ata5: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe100 irq 18
ata6: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe180 irq 18
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
pata_acpi 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pata_acpi 0000:03:00.1: setting latency timer to 64
pata_acpi 0000:03:00.1: PCI INT B disabled
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi6 : pata_jmicron
scsi7 : pata_jmicron
ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
CE: hpet5 increased min_delta_ns to 7500 nsec
CE: hpet5 increased min_delta_ns to 11250 nsec
hrtimer: interrupt took 3256 ns
usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0151
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: USB2.0-CRW
usb 1-1.2: Manufacturer: Generic
usb 1-1.2: SerialNumber: 20060413092100000
usb 2-1.6: new full speed USB device using ehci_hcd and address 3
usb 2-1.6: New USB device found, idVendor=046d, idProduct=c068
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: Product: G500
usb 2-1.6: Manufacturer: Logitech
usb 2-1.6: SerialNumber: BAC05033E40018
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input0
generic-usb 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.0-1.6/input0
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input1
generic-usb 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.0-1.6/input1
usb 2-1.8: new low speed USB device using ehci_hcd and address 4
usb 2-1.8: New USB device found, idVendor=046d, idProduct=c30e
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8: Product: HID compliant keyboard
usb 2-1.8: Manufacturer: Logitech
input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input2
generic-usb 0003:046D:C30E.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1.8/input0
input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input3
generic-usb 0003:046D:C30E.0004: input,hidraw3: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1.8/input1
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: acl
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
CE: hpet3 increased min_delta_ns to 7500 nsec
CE: hpet3 increased min_delta_ns to 11250 nsec
udev[133]: starting version 166
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ATK0110 ATK0110:00: EC enabled
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
ACPI: acpi_idle yielding to intel_idle
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
Linux video capture interface: v2.00
[fglrx] Maximum main memory to use for locked dma buffers: 3799 MBytes.
[fglrx] vendor: 1002 device: 9442 count: 1
[fglrx] ioport: bar 4, base 0xb000, size: 0x100
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors
IR NEC protocol handler initialized
IR RC5(x) protocol handler initialized
saa7130/34: v4l2 driver version 0.2.16 loaded
saa7134 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
saa7133[0]: found at 0000:07:01.0, rev: 209, irq: 16, latency: 64, mmio: 0xf7fff800
saa7133[0]: subsystem: 1461:f01d, board: Avermedia Super 007 [card=117,autodetected]
saa7133[0]: board init: gpio is 40000
IR RC6 protocol handler initialized
IR JVC protocol handler initialized
IR Sony protocol handler initialized
lirc_dev: IR Remote Control driver registered, major 250
IR LIRC bridge handler initialized
saa7133[0]: i2c eeprom 00: 61 14 1d f0 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 55 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 02 15 16 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
EXT4-fs (sdd1): re-mounted. Opts: acl
tuner 0-004b: chip found @ 0x96 (saa7133[0])
tda829x 0-004b: setting tuner address to 60
tda829x 0-004b: type set to tda8290+75a
EXT4-fs (sdd6): mounted filesystem with ordered data mode. Opts: acl
fuse init (API version 7.16)
saa7133[0]: dsp access error
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
dvb_init() allocating 1 frontend
DVB: registering new adapter (saa7133[0])
DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
vboxguest: VirtualBox Guest PCI device not found.
Adding 4088504k swap on /dev/sdd5. Priority:-1 extents:1 across:4088504k
tda1004x: found firmware revision 0 -- invalid
tda1004x: trying to boot from eeprom
tda1004x: found firmware revision 0 -- invalid
tda1004x: waiting for firmware upload...
tda1004x: no firmware upload (timeout or file not found?)
tda1004x: firmware upload failed
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xf7fff800 irq 16 registered as card -1
fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 1239
[fglrx] Firegl kernel thread PID: 1240
[fglrx] Firegl kernel thread PID: 1241
[fglrx] IRQ 45 Enabled
[fglrx] Gart USWC size:1240 M.
[fglrx] Gart cacheable size:491 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
[fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
CE: hpet4 increased min_delta_ns to 7500 nsec
CE: hpet4 increased min_delta_ns to 11250 nsec
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
ata1: EH complete
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
ata1: EH complete
ata2.00: configured for UDMA/133
ata2.01: configured for UDMA/100
ata2: EH complete
ata3.00: configured for UDMA/133
ata3: EH complete
EXT4-fs (sdd1): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd6): re-mounted. Opts: acl,commit=0
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 47 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc9000671a000, 20:cf:30:1b:d8:6e, XID 083000c0 IRQ 47
autoconfig: line_outs=4 (0x24/0x25/0x26/0x27/0x0)
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x2d/0x2e
inputs:
hda-codec: no NID for mapping control Independent HP:0:0
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: irq 48 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
firewire_ohci 0000:07:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: Attached scsi generic sg2 type 0
sr 1:0:1:0: Attached scsi generic sg3 type 5
sd 2:0:0:0: Attached scsi generic sg4 type 0
firewire_ohci: Added fw-ohci device 0000:07:04.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
Initializing USB Mass Storage driver...
scsi8 : usb-storage 1-1.2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usbcore: registered new interface driver uas
firewire_core: created device fw0: GUID 001e8c0000dbb635, S400
scsi 8:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg5 type 0
scsi 8:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:1: Attached scsi generic sg6 type 0
scsi 8:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:2: Attached scsi generic sg7 type 0
scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:3: Attached scsi generic sg8 type 0
sd 8:0:0:2: [sdg] Attached SCSI removable disk
sd 8:0:0:0: [sde] Attached SCSI removable disk
sd 8:0:0:1: [sdf] Attached SCSI removable disk
sd 8:0:0:3: [sdh] Attached SCSI removable disk
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x216 offMax=0xc5d
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.14_OSE (interface 0x00180000).
NET: Registered protocol family 10
r8169 0000:02:00.0: eth0: unable to apply firmware patch rtl_nic/rtl8168d-2.fw
r8169 0000:02:00.0: eth0: link down
r8169 0000:02:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
r8169 0000:02:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
NET: Registered protocol family 17
hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
xt_time: kernel timezone is +0100
IFWLOG: register target
eth0: no IPv6 routers present
usb 1-1.6: new high speed USB device using ehci_hcd and address 4
usb 1-1.6: New USB device found, idVendor=090c, idProduct=1000
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: Flash Disk
usb 1-1.6: SerialNumber: AA04012700015834
scsi9 : usb-storage 1-1.6:1.0
scsi 9:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
sd 9:0:0:0: Attached scsi generic sg9 type 0
sd 9:0:0:0: [sdi] 1981440 512-byte logical blocks: (1.01 GB/967 MiB)
sd 9:0:0:0: [sdi] Write Protect is off
sd 9:0:0:0: [sdi] Mode Sense: 43 00 00 00
sd 9:0:0:0: [sdi] Assuming drive cache: write through
sd 9:0:0:0: [sdi] Assuming drive cache: write through
sdi: sdi1
sd 9:0:0:0: [sdi] Assuming drive cache: write through
sd 9:0:0:0: [sdi] Attached SCSI disk
warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[fglrx] IRQ 45 Disabled
fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 4202
[fglrx] Firegl kernel thread PID: 4203
[fglrx] Firegl kernel thread PID: 4204
[fglrx] IRQ 45 Enabled
[fglrx] Gart USWC size:1240 M.
[fglrx] Gart cacheable size:491 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
[fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
usb 1-1.6: USB disconnect, address 4
[fglrx] IRQ 45 Disabled
fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 13765
[fglrx] Firegl kernel thread PID: 13766
[fglrx] Firegl kernel thread PID: 13767
[fglrx] IRQ 45 Enabled
[fglrx] Gart USWC size:1240 M.
[fglrx] Gart cacheable size:491 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
[fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
[fglrx] IRQ 45 Disabled
fglrx_pci 0000:01:00.0: irq 45 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 14414
[fglrx] Firegl kernel thread PID: 14415
[fglrx] Firegl kernel thread PID: 14416
[fglrx] IRQ 45 Enabled
[fglrx] Gart USWC size:1240 M.
[fglrx] Gart cacheable size:491 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
[fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
usb 1-1.6: new high speed USB device using ehci_hcd and address 5
usb 1-1.6: New USB device found, idVendor=090c, idProduct=1000
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.6: Product: Flash Disk
usb 1-1.6: SerialNumber: AA04012700015834
scsi10 : usb-storage 1-1.6:1.0
scsi 10:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
sd 10:0:0:0: Attached scsi generic sg9 type 0
sd 10:0:0:0: [sdi] 1981440 512-byte logical blocks: (1.01 GB/967 MiB)
sd 10:0:0:0: [sdi] Write Protect is off
sd 10:0:0:0: [sdi] Mode Sense: 43 00 00 00
sd 10:0:0:0: [sdi] Assuming drive cache: write through
sd 10:0:0:0: [sdi] Assuming drive cache: write through
sdi: sdi1
sd 10:0:0:0: [sdi] Assuming drive cache: write through
sd 10:0:0:0: [sdi] Attached SCSI disk
WARNING! power/level is deprecated; use power/control instead
usb 1-1.6: USB disconnect, address 5
Puis voici le résultat à la commande cat /var/log/messages :
Caché :
Nov 9 18:44:56 localhost mtp-probe: checking bus 2, device 4: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8"
Nov 9 18:44:56 localhost mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6"
Nov 9 18:44:56 localhost mtp-probe: bus: 1, device: 3 was not an MTP device
Nov 9 18:44:56 localhost mtp-probe: bus: 2, device: 3 was not an MTP device
Nov 9 18:44:56 localhost mtp-probe: bus: 2, device: 4 was not an MTP device
Nov 9 18:44:56 localhost kernel: Initializing USB Mass Storage driver...
Nov 9 18:44:56 localhost kernel: scsi8 : usb-storage 1-1.2:1.0
Nov 9 18:44:56 localhost kernel: usbcore: registered new interface driver usb-storage
Nov 9 18:44:56 localhost kernel: USB Mass Storage support registered.
Nov 9 18:44:56 localhost kernel: usbcore: registered new interface driver uas
Nov 9 18:44:56 localhost kernel: firewire_core: created device fw0: GUID 001e8c0000dbb635, S400
Nov 9 18:44:57 localhost service_harddrake[1940]: ### Program is starting ###
Nov 9 18:44:57 localhost kernel: scsi 8:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
Nov 9 18:44:57 localhost kernel: sd 8:0:0:0: Attached scsi generic sg5 type 0
Nov 9 18:44:57 localhost kernel: scsi 8:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
Nov 9 18:44:57 localhost kernel: sd 8:0:0:1: Attached scsi generic sg6 type 0
Nov 9 18:44:57 localhost kernel: scsi 8:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
Nov 9 18:44:57 localhost kernel: sd 8:0:0:2: Attached scsi generic sg7 type 0
Nov 9 18:44:57 localhost kernel: scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
Nov 9 18:44:57 localhost kernel: sd 8:0:0:3: Attached scsi generic sg8 type 0
Nov 9 18:44:57 localhost kernel: sd 8:0:0:2: [sdg] Attached SCSI removable disk
Nov 9 18:44:57 localhost kernel: sd 8:0:0:0: [sde] Attached SCSI removable disk
Nov 9 18:44:57 localhost kernel: sd 8:0:0:1: [sdf] Attached SCSI removable disk
Nov 9 18:44:57 localhost kernel: sd 8:0:0:3: [sdh] Attached SCSI removable disk
Nov 9 18:44:57 localhost service_harddrake[1940]: running: dmidecode
Nov 9 18:44:58 localhost service_harddrake[1940]: modified file /etc/sysconfig/harddrake2/kernel
Nov 9 18:44:58 localhost service_harddrake[1940]: modified file /etc/sysconfig/harddrake2/xorg
Nov 9 18:44:59 localhost service_harddrake[1940]: created file /etc/sysconfig/harddrake2/previous_hw
Nov 9 18:44:59 localhost service_harddrake[1940]: launched command: display_driver_helper --check-loaded
Nov 9 18:44:59 localhost init: Entering runlevel: 5
Nov 9 18:45:00 localhost crond[2286]: (CRON) STARTUP (1.4.7)
Nov 9 18:45:00 localhost crond[2286]: (CRON) INFO (Syslog will be used instead of sendmail.): Aucun fichier ou dossier de ce type
Nov 9 18:45:00 localhost kernel: vboxdrv: fAsync=0 offMin=0x216 offMax=0xc5d
Nov 9 18:45:00 localhost kernel: vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Nov 9 18:45:00 localhost crond[2286]: (CRON) INFO (running with inotify support)
Nov 9 18:45:00 localhost kernel: NET: Registered protocol family 10
Nov 9 18:45:00 localhost ifplugd(eth0)[2565]: ifplugd 0.28 initializing.
Nov 9 18:45:00 localhost kernel: r8169 0000:02:00.0: eth0: unable to apply firmware patch rtl_nic/rtl8168d-2.fw
Nov 9 18:45:00 localhost ifplugd(eth0)[2565]: Using interface eth0/20:CF:30:1B:D8:6E with driver <r8169> (version: 2.3LK-NAPI)
Nov 9 18:45:00 localhost ifplugd(eth0)[2565]: Using detection mode: SIOCETHTOOL
Nov 9 18:45:00 localhost ifplugd(eth0)[2565]: Initialization complete, link beat not detected.
Nov 9 18:45:00 localhost kernel: r8169 0000:02:00.0: eth0: link down
Nov 9 18:45:00 localhost kernel: r8169 0000:02:00.0: eth0: link down
Nov 9 18:45:00 localhost kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 9 18:45:02 localhost kernel: r8169 0000:02:00.0: eth0: link up
Nov 9 18:45:02 localhost kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Nov 9 18:45:02 localhost ifplugd(eth0)[2565]: Link beat detected.
Nov 9 18:45:03 localhost ifplugd(eth0)[2565]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Nov 9 18:45:03 localhost gnome-session[2696]: EggSMClient-WARNING: Desktop file '/home/lesfouiz/.config/autostart/cairo-dock-cairo.desktop' has malformed Icon key 'cairo-dock.svg'(should not include extension)
Nov 9 18:45:04 localhost rtkit-daemon[2931]: Successfully made thread 2928 of process 2928 (/usr/bin/pulseaudio) owned by '500' high priority at nice level -11.
Nov 9 18:45:04 localhost rtkit-daemon[2931]: Successfully made thread 2934 of process 2928 (/usr/bin/pulseaudio) owned by '500' RT at priority 5.
Nov 9 18:45:04 localhost rtkit-daemon[2931]: Successfully made thread 2935 of process 2928 (/usr/bin/pulseaudio) owned by '500' RT at priority 5.
Nov 9 18:45:04 localhost rtkit-daemon[2931]: Successfully made thread 2936 of process 2928 (/usr/bin/pulseaudio) owned by '500' RT at priority 5.
Nov 9 18:45:04 localhost rtkit-daemon[2931]: Successfully made thread 2937 of process 2928 (/usr/bin/pulseaudio) owned by '500' RT at priority 5.
Nov 9 18:45:04 localhost kernel: NET: Registered protocol family 17
Nov 9 18:45:04 localhost dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67
Nov 9 18:45:04 localhost dhclient: DHCPACK from 192.168.0.254
Nov 9 18:45:04 localhost NET[3046]: /sbin/dhclient-script : updated /etc/resolv.conf
Nov 9 18:45:04 localhost ifplugd(eth0)[2565]: client: Determining IP information for eth0.../etc/sysconfig/network-scripts/network-functions: ligne419: /usr/sbin/nscd: Aucun fichier ou dossier de ce type
Nov 9 18:45:04 localhost dhclient: bound to 192.168.0.4 -- renewal in 363591 seconds.
Nov 9 18:45:04 localhost ifplugd(eth0)[2565]: client: done.
Nov 9 18:45:04 localhost ifplugd(eth0)[2565]: Program executed successfully.
Nov 9 18:45:05 localhost kernel: hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Found user 'avahi' (UID 498) and group 'avahi' (GID 498).
Nov 9 18:45:05 localhost avahi-daemon[3196]: Successfully dropped root privileges.
Nov 9 18:45:05 localhost avahi-daemon[3196]: avahi-daemon 0.6.30 starting up.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Successfully called chroot().
Nov 9 18:45:05 localhost avahi-daemon[3196]: Successfully dropped remaining capabilities.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Loading service file /services/sftp-ssh.service.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Loading service file /services/udisks.service.
Nov 9 18:45:05 localhost avahi-daemon[3196]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.4.
Nov 9 18:45:05 localhost avahi-daemon[3196]: New relevant interface eth0.IPv4 for mDNS.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Network interface enumeration completed.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Registering new address record for fe80::22cf:30ff:fe1b:d86e on eth0.*.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Registering new address record for 192.168.0.4 on eth0.IPv4.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Registering HINFO record with values 'X86_64'/'LINUX'.
Nov 9 18:45:06 localhost avahi-daemon[3196]: Server startup complete. Host name is linux.local. Local service cookie is 711698040.
Nov 9 18:45:06 localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 9 18:45:07 localhost kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Nov 9 18:45:07 localhost mgaapplet[3330]: ### Program is starting ###
Nov 9 18:45:07 localhost net_applet[3337]: ### Program is starting ###
Nov 9 18:45:07 localhost avahi-daemon[3196]: Service "linux" (/services/udisks.service) successfully established.
Nov 9 18:45:07 localhost avahi-daemon[3196]: Service "linux" (/services/sftp-ssh.service) successfully established.
Nov 9 18:45:07 localhost kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Nov 9 18:45:07 localhost kernel: NF_TPROXY: Transparent proxy support initialized, version 4.1.0
Nov 9 18:45:07 localhost kernel: NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
Nov 9 18:45:08 localhost kernel: Netfilter messages via NETLINK v0.30.
Nov 9 18:45:08 localhost kernel: ip_set: protocol 6
Nov 9 18:45:09 localhost mgaapplet[3330]: running: ionice -p 3330 -n7
Nov 9 18:45:10 localhost kernel: xt_time: kernel timezone is +0100
Nov 9 18:45:11 localhost kernel: IFWLOG: register target
Nov 9 18:45:11 localhost logger: Shorewall started
Nov 9 18:45:12 localhost dbus-daemon: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.55" (uid=500 pid=3321 comm="nautilus) interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply=0 destination=":1.1" (uid=0 pid=987 comm="/usr/sbin/console-kit-daemon))
Nov 9 18:45:27 localhost kernel: usb 1-1.6: new high speed USB device using ehci_hcd and address 4
Nov 9 18:45:27 localhost kernel: usb 1-1.6: New USB device found, idVendor=090c, idProduct=1000
Nov 9 18:45:27 localhost kernel: usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 9 18:45:27 localhost kernel: usb 1-1.6: Product: Flash Disk
Nov 9 18:45:27 localhost kernel: usb 1-1.6: SerialNumber: AA04012700015834
Nov 9 18:45:27 localhost kernel: scsi9 : usb-storage 1-1.6:1.0
Nov 9 18:45:27 localhost mtp-probe: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6"
Nov 9 18:45:27 localhost mtp-probe: bus: 1, device: 4 was not an MTP device
Nov 9 18:45:28 localhost kernel: scsi 9:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
Nov 9 18:45:28 localhost kernel: sd 9:0:0:0: Attached scsi generic sg9 type 0
Nov 9 18:45:28 localhost kernel: sd 9:0:0:0: [sdi] 1981440 512-byte logical blocks: (1.01 GB/967 MiB)
Nov 9 18:45:28 localhost kernel: sd 9:0:0:0: [sdi] Write Protect is off
Nov 9 18:45:28 localhost kernel: sd 9:0:0:0: [sdi] Assuming drive cache: write through
Nov 9 18:45:28 localhost kernel: sd 9:0:0:0: [sdi] Assuming drive cache: write through
Nov 9 18:45:28 localhost kernel: sdi: sdi1
Nov 9 18:45:28 localhost kernel: sd 9:0:0:0: [sdi] Assuming drive cache: write through
Nov 9 18:45:28 localhost kernel: sd 9:0:0:0: [sdi] Attached SCSI disk
Nov 9 18:45:36 localhost kernel: warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
Nov 9 18:46:16 localhost drakconf.real[4004]: ### Program is starting ###
Nov 9 18:46:25 localhost drakconf.real[4026]: ### Program is starting ###
Nov 9 18:46:42 localhost userdrake[4084]: ### Program is starting ###
Nov 9 18:47:46 localhost drakconf.real[4026]: modified file /etc/mcc.conf
Nov 9 18:47:48 localhost kernel: [fglrx] IRQ 45 Disabled
Nov 9 18:47:49 localhost acpid: client 1236[0:0] has disconnected
Nov 9 18:47:49 localhost acpid: client connected from 4198[0:0]
Nov 9 18:47:49 localhost acpid: 1 client rule loaded
Nov 9 18:47:49 localhost kernel: [fglrx] Firegl kernel thread PID: 4202
Nov 9 18:47:49 localhost kernel: [fglrx] Firegl kernel thread PID: 4203
Nov 9 18:47:49 localhost kernel: [fglrx] Firegl kernel thread PID: 4204
Nov 9 18:47:49 localhost kernel: [fglrx] IRQ 45 Enabled
Nov 9 18:47:50 localhost kernel: [fglrx] Gart USWC size:1240 M.
Nov 9 18:47:50 localhost kernel: [fglrx] Gart cacheable size:491 M.
Nov 9 18:47:50 localhost kernel: [fglrx] Reserved FB block: Shared offset:0, size:1000000
Nov 9 18:47:50 localhost kernel: [fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
Nov 9 18:47:50 localhost kernel: [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
Nov 9 18:47:53 localhost rtkit-daemon[2931]: Successfully made thread 4264 of process 4264 (/usr/bin/pulseaudio) owned by '491' high priority at nice level -11.
Nov 9 18:47:53 localhost rtkit-daemon[2931]: Successfully made thread 4266 of process 4264 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 18:47:53 localhost rtkit-daemon[2931]: Successfully made thread 4272 of process 4264 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 18:47:53 localhost rtkit-daemon[2931]: Successfully made thread 4273 of process 4264 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 18:47:53 localhost rtkit-daemon[2931]: Successfully made thread 4274 of process 4264 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 18:48:07 localhost gnome-session[4293]: EggSMClient-WARNING: Desktop file '/home/lesfouiz/.config/autostart/cairo-dock-cairo.desktop' has malformed Icon key 'cairo-dock.svg'(should not include extension)
Nov 9 18:48:07 localhost rtkit-daemon[2931]: Successfully made thread 4452 of process 4452 (/usr/bin/pulseaudio) owned by '500' high priority at nice level -11.
Nov 9 18:48:07 localhost pulseaudio[4452]: pid.c: Daemon already running.
Nov 9 18:48:07 localhost pulseaudio[2928]: x11wrap.c: XOpenDisplay() failed
Nov 9 18:48:07 localhost pulseaudio[2928]: module.c: Failed to load module "module-x11-publish" (argument: "display=:0"): initialization failed.
Nov 9 18:48:09 localhost net_applet[4509]: ### Program is starting ###
Nov 9 18:48:09 localhost mgaapplet[4493]: ### Program is starting ###
Nov 9 18:48:10 localhost mgaapplet[4493]: running: ionice -p 4493 -n7
Nov 9 18:48:10 localhost dbus-daemon: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.84" (uid=500 pid=4473 comm="nautilus) interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply=0 destination=":1.1" (uid=0 pid=987 comm="/usr/sbin/console-kit-daemon))
Nov 9 18:50:02 localhost ntfs-3g[4970]: Version 2011.1.15 external FUSE 28
Nov 9 18:50:02 localhost ntfs-3g[4970]: Mounted /dev/sdc1 (Read-Write, label "NOS DOCUMENTS", NTFS 3.1)
Nov 9 18:50:02 localhost ntfs-3g[4970]: Cmdline options: rw,nosuid,nodev,uhelper=udisks,uid=500,gid=500,dmask=0077,fmask=0177
Nov 9 18:50:02 localhost ntfs-3g[4970]: Mount options: rw,nosuid,nodev,uhelper=udisks,allow_other,nonempty,relatime,fsname=/dev/sdc1,blkdev,blksize=4096,default_permissions
Nov 9 18:50:02 localhost ntfs-3g[4970]: Global ownership and permissions enforced, configuration type 1
Nov 9 18:50:21 localhost ntfs-3g[4970]: Could not convert filename to Unicode: 'RIFF6.�': Invalid or incomplete multibyte or wide character
Nov 9 18:51:44 localhost kernel: usb 1-1.6: USB disconnect, address 4
Nov 9 18:53:11 localhost mgaapplet[4493]: trying distributions list from https://releases.mageia.org/api/a/x86_64?product=Default&version=1&mgaonline_version=2.77.29
Nov 9 18:53:11 localhost mgaapplet[4493]: Computing new updates...
Nov 9 18:53:11 localhost mgaapplet[4493]: running: urpmi.update --update
Nov 9 18:53:25 localhost mgaapplet[4493]: updating inactive backport media Core Backports, Core Backports Testing, Nonfree Backports, Nonfree Backports Testing, Tainted Backports, Tainted Backports Testing, Core 32bit Backports, Core 32bit Backports Testing, Core Backports (distrib7), Core Backports Testing (distrib9), Nonfree Backports (distrib17), Nonfree Backports Testing (distrib19), Tainted Backports (distrib27), Tainted Backports Testing (distrib29), Core 32bit Backports (distrib37), Core 32bit Backports Testing (distrib39)
Nov 9 18:53:25 localhost mgaapplet[4493]: running: urpmi.update Core Backports
Nov 9 18:53:27 localhost mgaapplet[4493]: running: urpmi.update Core Backports Testing
Nov 9 18:53:29 localhost mgaapplet[4493]: running: urpmi.update Nonfree Backports
Nov 9 18:53:31 localhost mgaapplet[4493]: running: urpmi.update Nonfree Backports Testing
Nov 9 18:53:33 localhost mgaapplet[4493]: running: urpmi.update Tainted Backports
Nov 9 18:53:35 localhost mgaapplet[4493]: running: urpmi.update Tainted Backports Testing
Nov 9 18:53:37 localhost mgaapplet[4493]: running: urpmi.update Core 32bit Backports
Nov 9 18:53:39 localhost mgaapplet[4493]: running: urpmi.update Core 32bit Backports Testing
Nov 9 18:53:41 localhost mgaapplet[4493]: running: urpmi.update Core Backports (distrib7)
Nov 9 18:53:43 localhost mgaapplet[4493]: running: urpmi.update Core Backports Testing (distrib9)
Nov 9 18:53:46 localhost mgaapplet[4493]: running: urpmi.update Nonfree Backports (distrib17)
Nov 9 18:53:48 localhost mgaapplet[4493]: running: urpmi.update Nonfree Backports Testing (distrib19)
Nov 9 18:53:50 localhost mgaapplet[4493]: running: urpmi.update Tainted Backports (distrib27)
Nov 9 18:53:52 localhost mgaapplet[4493]: running: urpmi.update Tainted Backports Testing (distrib29)
Nov 9 18:53:54 localhost mgaapplet[4493]: running: urpmi.update Core 32bit Backports (distrib37)
Nov 9 18:53:56 localhost mgaapplet[4493]: running: urpmi.update Core 32bit Backports Testing (distrib39)
Nov 9 18:54:03 localhost mgaapplet[4493]: Packages are up to date
Nov 9 19:01:01 localhost CROND[6715]: (root) CMD (nice -n 19 run-parts --report /etc/cron.hourly)
Nov 9 19:44:46 localhost drakconf.real[13486]: ### Program is starting ###
Nov 9 19:44:49 localhost drakconf.real[13498]: ### Program is starting ###
Nov 9 19:44:55 localhost userdrake[13539]: ### Program is starting ###
Nov 9 19:45:21 localhost userdrake[13539]: Retrait du groupe : vboxuser
Nov 9 19:45:43 localhost userdrake[13669]: ### Program is starting ###
Nov 9 19:46:05 localhost drakconf.real[13498]: modified file /etc/mcc.conf
Nov 9 19:46:13 localhost kernel: [fglrx] IRQ 45 Disabled
Nov 9 19:46:13 localhost acpid: client 4198[0:0] has disconnected
Nov 9 19:46:13 localhost acpid: client connected from 13761[0:0]
Nov 9 19:46:13 localhost acpid: 1 client rule loaded
Nov 9 19:46:13 localhost kernel: [fglrx] Firegl kernel thread PID: 13765
Nov 9 19:46:13 localhost kernel: [fglrx] Firegl kernel thread PID: 13766
Nov 9 19:46:13 localhost kernel: [fglrx] Firegl kernel thread PID: 13767
Nov 9 19:46:13 localhost kernel: [fglrx] IRQ 45 Enabled
Nov 9 19:46:14 localhost kernel: [fglrx] Gart USWC size:1240 M.
Nov 9 19:46:14 localhost kernel: [fglrx] Gart cacheable size:491 M.
Nov 9 19:46:14 localhost kernel: [fglrx] Reserved FB block: Shared offset:0, size:1000000
Nov 9 19:46:14 localhost kernel: [fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
Nov 9 19:46:14 localhost kernel: [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
Nov 9 19:46:17 localhost rtkit-daemon[2931]: Successfully made thread 13827 of process 13827 (/usr/bin/pulseaudio) owned by '491' high priority at nice level -11.
Nov 9 19:46:17 localhost pulseaudio[13827]: pid.c: Stale PID file, overwriting.
Nov 9 19:46:17 localhost rtkit-daemon[2931]: Successfully made thread 13828 of process 13827 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:46:18 localhost rtkit-daemon[2931]: Successfully made thread 13838 of process 13827 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:46:18 localhost rtkit-daemon[2931]: Successfully made thread 13839 of process 13827 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:46:18 localhost rtkit-daemon[2931]: Successfully made thread 13840 of process 13827 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:46:25 localhost gnome-session[13854]: EggSMClient-WARNING: Desktop file '/home/lesfouiz/.config/autostart/cairo-dock-cairo.desktop' has malformed Icon key 'cairo-dock.svg'(should not include extension)
Nov 9 19:46:25 localhost rtkit-daemon[2931]: Successfully made thread 14013 of process 14013 (/usr/bin/pulseaudio) owned by '500' high priority at nice level -11.
Nov 9 19:46:25 localhost pulseaudio[14013]: pid.c: Daemon already running.
Nov 9 19:46:25 localhost pulseaudio[2928]: x11wrap.c: XOpenDisplay() failed
Nov 9 19:46:25 localhost pulseaudio[2928]: module.c: Failed to load module "module-x11-publish" (argument: "display=:0"): initialization failed.
Nov 9 19:46:27 localhost mgaapplet[14055]: ### Program is starting ###
Nov 9 19:46:27 localhost net_applet[14078]: ### Program is starting ###
Nov 9 19:46:28 localhost dbus-daemon: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.112" (uid=500 pid=14034 comm="nautilus) interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply=0 destination=":1.1" (uid=0 pid=987 comm="/usr/sbin/console-kit-daemon))
Nov 9 19:46:28 localhost mgaapplet[14055]: running: ionice -p 14055 -n7
Nov 9 19:46:34 localhost drakconf.real[14175]: ### Program is starting ###
Nov 9 19:46:37 localhost drakconf.real[14188]: ### Program is starting ###
Nov 9 19:46:44 localhost userdrake[14221]: ### Program is starting ###
Nov 9 19:47:42 localhost userdrake[14221]: Ajout du groupe : vbosusers
Nov 9 19:48:01 localhost userdrake[14343]: ### Program is starting ###
Nov 9 19:48:33 localhost drakconf.real[14188]: modified file /etc/mcc.conf
Nov 9 19:48:36 localhost kernel: [fglrx] IRQ 45 Disabled
Nov 9 19:48:36 localhost acpid: client 13761[0:0] has disconnected
Nov 9 19:48:36 localhost acpid: client connected from 14410[0:0]
Nov 9 19:48:36 localhost acpid: 1 client rule loaded
Nov 9 19:48:37 localhost kernel: [fglrx] Firegl kernel thread PID: 14414
Nov 9 19:48:37 localhost kernel: [fglrx] Firegl kernel thread PID: 14415
Nov 9 19:48:37 localhost kernel: [fglrx] Firegl kernel thread PID: 14416
Nov 9 19:48:37 localhost kernel: [fglrx] IRQ 45 Enabled
Nov 9 19:48:37 localhost kernel: [fglrx] Gart USWC size:1240 M.
Nov 9 19:48:37 localhost kernel: [fglrx] Gart cacheable size:491 M.
Nov 9 19:48:37 localhost kernel: [fglrx] Reserved FB block: Shared offset:0, size:1000000
Nov 9 19:48:37 localhost kernel: [fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
Nov 9 19:48:37 localhost kernel: [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
Nov 9 19:48:41 localhost rtkit-daemon[2931]: Successfully made thread 14476 of process 14476 (/usr/bin/pulseaudio) owned by '491' high priority at nice level -11.
Nov 9 19:48:41 localhost rtkit-daemon[2931]: Successfully made thread 14477 of process 14476 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:48:41 localhost rtkit-daemon[2931]: Successfully made thread 14484 of process 14476 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:48:41 localhost rtkit-daemon[2931]: Successfully made thread 14485 of process 14476 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:48:41 localhost rtkit-daemon[2931]: Successfully made thread 14486 of process 14476 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:48:48 localhost gnome-session[14503]: EggSMClient-WARNING: Desktop file '/home/lesfouiz/.config/autostart/cairo-dock-cairo.desktop' has malformed Icon key 'cairo-dock.svg'(should not include extension)
Nov 9 19:48:48 localhost rtkit-daemon[2931]: Successfully made thread 14662 of process 14662 (/usr/bin/pulseaudio) owned by '500' high priority at nice level -11.
Nov 9 19:48:48 localhost pulseaudio[14662]: pid.c: Daemon already running.
Nov 9 19:48:48 localhost pulseaudio[2928]: x11wrap.c: XOpenDisplay() failed
Nov 9 19:48:48 localhost pulseaudio[2928]: module.c: Failed to load module "module-x11-publish" (argument: "display=:0"): initialization failed.
Nov 9 19:48:50 localhost mgaapplet[14713]: ### Program is starting ###
Nov 9 19:48:50 localhost net_applet[14729]: ### Program is starting ###
Nov 9 19:48:50 localhost dbus-daemon: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.140" (uid=500 pid=14691 comm="nautilus) interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply=0 destination=":1.1" (uid=0 pid=987 comm="/usr/sbin/console-kit-daemon))
Nov 9 19:48:51 localhost mgaapplet[14713]: running: ionice -p 14713 -n7
Nov 9 19:49:26 localhost kernel: usb 1-1.6: new high speed USB device using ehci_hcd and address 5
Nov 9 19:49:26 localhost kernel: usb 1-1.6: New USB device found, idVendor=090c, idProduct=1000
Nov 9 19:49:26 localhost kernel: usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 9 19:49:26 localhost kernel: usb 1-1.6: Product: Flash Disk
Nov 9 19:49:26 localhost kernel: usb 1-1.6: SerialNumber: AA04012700015834
Nov 9 19:49:26 localhost kernel: scsi10 : usb-storage 1-1.6:1.0
Nov 9 19:49:26 localhost mtp-probe: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6"
Nov 9 19:49:26 localhost mtp-probe: bus: 1, device: 5 was not an MTP device
Nov 9 19:49:27 localhost kernel: scsi 10:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
Nov 9 19:49:27 localhost kernel: sd 10:0:0:0: Attached scsi generic sg9 type 0
Nov 9 19:49:27 localhost kernel: sd 10:0:0:0: [sdi] 1981440 512-byte logical blocks: (1.01 GB/967 MiB)
Nov 9 19:49:27 localhost kernel: sd 10:0:0:0: [sdi] Write Protect is off
Nov 9 19:49:27 localhost kernel: sd 10:0:0:0: [sdi] Assuming drive cache: write through
Nov 9 19:49:27 localhost kernel: sd 10:0:0:0: [sdi] Assuming drive cache: write through
Nov 9 19:49:27 localhost kernel: sdi: sdi1
Nov 9 19:49:27 localhost kernel: sd 10:0:0:0: [sdi] Assuming drive cache: write through
Nov 9 19:49:27 localhost kernel: sd 10:0:0:0: [sdi] Attached SCSI disk
Nov 9 19:53:51 localhost mgaapplet[14713]: trying distributions list from https://releases.mageia.org/api/a/x86_64?product=Default&version=1&mgaonline_version=2.77.29
Nov 9 19:53:52 localhost mgaapplet[14713]: Computing new updates...
Nov 9 19:53:52 localhost mgaapplet[14713]: running: urpmi.update --update
Nov 9 19:54:06 localhost mgaapplet[14713]: updating inactive backport media Core Backports, Core Backports Testing, Nonfree Backports, Nonfree Backports Testing, Tainted Backports, Tainted Backports Testing, Core 32bit Backports, Core 32bit Backports Testing, Core Backports (distrib7), Core Backports Testing (distrib9), Nonfree Backports (distrib17), Nonfree Backports Testing (distrib19), Tainted Backports (distrib27), Tainted Backports Testing (distrib29), Core 32bit Backports (distrib37), Core 32bit Backports Testing (distrib39)
Nov 9 19:54:06 localhost mgaapplet[14713]: running: urpmi.update Core Backports
Nov 9 19:54:08 localhost mgaapplet[14713]: running: urpmi.update Core Backports Testing
Nov 9 19:54:11 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports
Nov 9 19:54:13 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports Testing
Nov 9 19:54:15 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports
Nov 9 19:54:17 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports Testing
Nov 9 19:54:19 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports
Nov 9 19:54:22 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports Testing
Nov 9 19:54:24 localhost mgaapplet[14713]: running: urpmi.update Core Backports (distrib7)
Nov 9 19:54:26 localhost mgaapplet[14713]: running: urpmi.update Core Backports Testing (distrib9)
Nov 9 19:54:28 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports (distrib17)
Nov 9 19:54:30 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports Testing (distrib19)
Nov 9 19:54:33 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports (distrib27)
Nov 9 19:54:35 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports Testing (distrib29)
Nov 9 19:54:37 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports (distrib37)
Nov 9 19:54:39 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports Testing (distrib39)
Nov 9 19:54:42 localhost mgaapplet[14713]: Packages are up to date
Nov 9 19:55:56 localhost kernel: WARNING! power/level is deprecated; use power/control instead
Nov 9 19:55:56 localhost kernel: usb 1-1.6: USB disconnect, address 5
Nov 9 20:01:01 localhost CROND[16776]: (root) CMD (nice -n 19 run-parts --report /etc/cron.hourly)
Nov 9 21:01:01 localhost CROND[26334]: (root) CMD (nice -n 19 run-parts --report /etc/cron.hourly)
Nov 9 22:01:01 localhost CROND[3516]: (root) CMD (nice -n 19 run-parts --report /etc/cron.hourly)
Nov 9 22:53:51 localhost mgaapplet[14713]: Computing new updates...
Nov 9 22:53:51 localhost mgaapplet[14713]: running: urpmi.update --update
Nov 9 22:54:04 localhost mgaapplet[14713]: updating inactive backport media Core Backports, Core Backports Testing, Nonfree Backports, Nonfree Backports Testing, Tainted Backports, Tainted Backports Testing, Core 32bit Backports, Core 32bit Backports Testing, Core Backports (distrib7), Core Backports Testing (distrib9), Nonfree Backports (distrib17), Nonfree Backports Testing (distrib19), Tainted Backports (distrib27), Tainted Backports Testing (distrib29), Core 32bit Backports (distrib37), Core 32bit Backports Testing (distrib39)
Nov 9 22:54:04 localhost mgaapplet[14713]: running: urpmi.update Core Backports
Nov 9 22:54:06 localhost mgaapplet[14713]: running: urpmi.update Core Backports Testing
Nov 9 22:54:08 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports
Nov 9 22:54:11 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports Testing
Nov 9 22:54:13 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports
Nov 9 22:54:15 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports Testing
Nov 9 22:54:17 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports
Nov 9 22:54:19 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports Testing
Nov 9 22:54:21 localhost mgaapplet[14713]: running: urpmi.update Core Backports (distrib7)
Nov 9 22:54:23 localhost mgaapplet[14713]: running: urpmi.update Core Backports Testing (distrib9)
Nov 9 22:54:25 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports (distrib17)
Nov 9 22:54:27 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports Testing (distrib19)
Nov 9 22:54:28 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports (distrib27)
Nov 9 22:54:30 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports Testing (distrib29)
Nov 9 22:54:32 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports (distrib37)
Nov 9 22:54:34 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports Testing (distrib39)
Nov 9 22:54:37 localhost mgaapplet[14713]: Packages are up to date
Nov 9 23:01:01 localhost CROND[13504]: (root) CMD (nice -n 19 run-parts --report /etc/cron.hourly)
Nov 9 18:44:56 localhost mtp-probe: checking bus 2, device 3: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6"
Nov 9 18:44:56 localhost mtp-probe: bus: 1, device: 3 was not an MTP device
Nov 9 18:44:56 localhost mtp-probe: bus: 2, device: 3 was not an MTP device
Nov 9 18:44:56 localhost mtp-probe: bus: 2, device: 4 was not an MTP device
Nov 9 18:44:56 localhost kernel: Initializing USB Mass Storage driver...
Nov 9 18:44:56 localhost kernel: scsi8 : usb-storage 1-1.2:1.0
Nov 9 18:44:56 localhost kernel: usbcore: registered new interface driver usb-storage
Nov 9 18:44:56 localhost kernel: USB Mass Storage support registered.
Nov 9 18:44:56 localhost kernel: usbcore: registered new interface driver uas
Nov 9 18:44:56 localhost kernel: firewire_core: created device fw0: GUID 001e8c0000dbb635, S400
Nov 9 18:44:57 localhost service_harddrake[1940]: ### Program is starting ###
Nov 9 18:44:57 localhost kernel: scsi 8:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
Nov 9 18:44:57 localhost kernel: sd 8:0:0:0: Attached scsi generic sg5 type 0
Nov 9 18:44:57 localhost kernel: scsi 8:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
Nov 9 18:44:57 localhost kernel: sd 8:0:0:1: Attached scsi generic sg6 type 0
Nov 9 18:44:57 localhost kernel: scsi 8:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
Nov 9 18:44:57 localhost kernel: sd 8:0:0:2: Attached scsi generic sg7 type 0
Nov 9 18:44:57 localhost kernel: scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
Nov 9 18:44:57 localhost kernel: sd 8:0:0:3: Attached scsi generic sg8 type 0
Nov 9 18:44:57 localhost kernel: sd 8:0:0:2: [sdg] Attached SCSI removable disk
Nov 9 18:44:57 localhost kernel: sd 8:0:0:0: [sde] Attached SCSI removable disk
Nov 9 18:44:57 localhost kernel: sd 8:0:0:1: [sdf] Attached SCSI removable disk
Nov 9 18:44:57 localhost kernel: sd 8:0:0:3: [sdh] Attached SCSI removable disk
Nov 9 18:44:57 localhost service_harddrake[1940]: running: dmidecode
Nov 9 18:44:58 localhost service_harddrake[1940]: modified file /etc/sysconfig/harddrake2/kernel
Nov 9 18:44:58 localhost service_harddrake[1940]: modified file /etc/sysconfig/harddrake2/xorg
Nov 9 18:44:59 localhost service_harddrake[1940]: created file /etc/sysconfig/harddrake2/previous_hw
Nov 9 18:44:59 localhost service_harddrake[1940]: launched command: display_driver_helper --check-loaded
Nov 9 18:44:59 localhost init: Entering runlevel: 5
Nov 9 18:45:00 localhost crond[2286]: (CRON) STARTUP (1.4.7)
Nov 9 18:45:00 localhost crond[2286]: (CRON) INFO (Syslog will be used instead of sendmail.): Aucun fichier ou dossier de ce type
Nov 9 18:45:00 localhost kernel: vboxdrv: fAsync=0 offMin=0x216 offMax=0xc5d
Nov 9 18:45:00 localhost kernel: vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Nov 9 18:45:00 localhost crond[2286]: (CRON) INFO (running with inotify support)
Nov 9 18:45:00 localhost kernel: NET: Registered protocol family 10
Nov 9 18:45:00 localhost ifplugd(eth0)[2565]: ifplugd 0.28 initializing.
Nov 9 18:45:00 localhost kernel: r8169 0000:02:00.0: eth0: unable to apply firmware patch rtl_nic/rtl8168d-2.fw
Nov 9 18:45:00 localhost ifplugd(eth0)[2565]: Using interface eth0/20:CF:30:1B:D8:6E with driver <r8169> (version: 2.3LK-NAPI)
Nov 9 18:45:00 localhost ifplugd(eth0)[2565]: Using detection mode: SIOCETHTOOL
Nov 9 18:45:00 localhost ifplugd(eth0)[2565]: Initialization complete, link beat not detected.
Nov 9 18:45:00 localhost kernel: r8169 0000:02:00.0: eth0: link down
Nov 9 18:45:00 localhost kernel: r8169 0000:02:00.0: eth0: link down
Nov 9 18:45:00 localhost kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 9 18:45:02 localhost kernel: r8169 0000:02:00.0: eth0: link up
Nov 9 18:45:02 localhost kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Nov 9 18:45:02 localhost ifplugd(eth0)[2565]: Link beat detected.
Nov 9 18:45:03 localhost ifplugd(eth0)[2565]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Nov 9 18:45:03 localhost gnome-session[2696]: EggSMClient-WARNING: Desktop file '/home/lesfouiz/.config/autostart/cairo-dock-cairo.desktop' has malformed Icon key 'cairo-dock.svg'(should not include extension)
Nov 9 18:45:04 localhost rtkit-daemon[2931]: Successfully made thread 2928 of process 2928 (/usr/bin/pulseaudio) owned by '500' high priority at nice level -11.
Nov 9 18:45:04 localhost rtkit-daemon[2931]: Successfully made thread 2934 of process 2928 (/usr/bin/pulseaudio) owned by '500' RT at priority 5.
Nov 9 18:45:04 localhost rtkit-daemon[2931]: Successfully made thread 2935 of process 2928 (/usr/bin/pulseaudio) owned by '500' RT at priority 5.
Nov 9 18:45:04 localhost rtkit-daemon[2931]: Successfully made thread 2936 of process 2928 (/usr/bin/pulseaudio) owned by '500' RT at priority 5.
Nov 9 18:45:04 localhost rtkit-daemon[2931]: Successfully made thread 2937 of process 2928 (/usr/bin/pulseaudio) owned by '500' RT at priority 5.
Nov 9 18:45:04 localhost kernel: NET: Registered protocol family 17
Nov 9 18:45:04 localhost dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67
Nov 9 18:45:04 localhost dhclient: DHCPACK from 192.168.0.254
Nov 9 18:45:04 localhost NET[3046]: /sbin/dhclient-script : updated /etc/resolv.conf
Nov 9 18:45:04 localhost ifplugd(eth0)[2565]: client: Determining IP information for eth0.../etc/sysconfig/network-scripts/network-functions: ligne419: /usr/sbin/nscd: Aucun fichier ou dossier de ce type
Nov 9 18:45:04 localhost dhclient: bound to 192.168.0.4 -- renewal in 363591 seconds.
Nov 9 18:45:04 localhost ifplugd(eth0)[2565]: client: done.
Nov 9 18:45:04 localhost ifplugd(eth0)[2565]: Program executed successfully.
Nov 9 18:45:05 localhost kernel: hda-intel: IRQ timing workaround is activated for card #2. Suggest a bigger bdl_pos_adj.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Found user 'avahi' (UID 498) and group 'avahi' (GID 498).
Nov 9 18:45:05 localhost avahi-daemon[3196]: Successfully dropped root privileges.
Nov 9 18:45:05 localhost avahi-daemon[3196]: avahi-daemon 0.6.30 starting up.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Successfully called chroot().
Nov 9 18:45:05 localhost avahi-daemon[3196]: Successfully dropped remaining capabilities.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Loading service file /services/sftp-ssh.service.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Loading service file /services/udisks.service.
Nov 9 18:45:05 localhost avahi-daemon[3196]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.4.
Nov 9 18:45:05 localhost avahi-daemon[3196]: New relevant interface eth0.IPv4 for mDNS.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Network interface enumeration completed.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Registering new address record for fe80::22cf:30ff:fe1b:d86e on eth0.*.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Registering new address record for 192.168.0.4 on eth0.IPv4.
Nov 9 18:45:05 localhost avahi-daemon[3196]: Registering HINFO record with values 'X86_64'/'LINUX'.
Nov 9 18:45:06 localhost avahi-daemon[3196]: Server startup complete. Host name is linux.local. Local service cookie is 711698040.
Nov 9 18:45:06 localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 9 18:45:07 localhost kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Nov 9 18:45:07 localhost mgaapplet[3330]: ### Program is starting ###
Nov 9 18:45:07 localhost net_applet[3337]: ### Program is starting ###
Nov 9 18:45:07 localhost avahi-daemon[3196]: Service "linux" (/services/udisks.service) successfully established.
Nov 9 18:45:07 localhost avahi-daemon[3196]: Service "linux" (/services/sftp-ssh.service) successfully established.
Nov 9 18:45:07 localhost kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Nov 9 18:45:07 localhost kernel: NF_TPROXY: Transparent proxy support initialized, version 4.1.0
Nov 9 18:45:07 localhost kernel: NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
Nov 9 18:45:08 localhost kernel: Netfilter messages via NETLINK v0.30.
Nov 9 18:45:08 localhost kernel: ip_set: protocol 6
Nov 9 18:45:09 localhost mgaapplet[3330]: running: ionice -p 3330 -n7
Nov 9 18:45:10 localhost kernel: xt_time: kernel timezone is +0100
Nov 9 18:45:11 localhost kernel: IFWLOG: register target
Nov 9 18:45:11 localhost logger: Shorewall started
Nov 9 18:45:12 localhost dbus-daemon: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.55" (uid=500 pid=3321 comm="nautilus) interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply=0 destination=":1.1" (uid=0 pid=987 comm="/usr/sbin/console-kit-daemon))
Nov 9 18:45:27 localhost kernel: usb 1-1.6: new high speed USB device using ehci_hcd and address 4
Nov 9 18:45:27 localhost kernel: usb 1-1.6: New USB device found, idVendor=090c, idProduct=1000
Nov 9 18:45:27 localhost kernel: usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 9 18:45:27 localhost kernel: usb 1-1.6: Product: Flash Disk
Nov 9 18:45:27 localhost kernel: usb 1-1.6: SerialNumber: AA04012700015834
Nov 9 18:45:27 localhost kernel: scsi9 : usb-storage 1-1.6:1.0
Nov 9 18:45:27 localhost mtp-probe: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6"
Nov 9 18:45:27 localhost mtp-probe: bus: 1, device: 4 was not an MTP device
Nov 9 18:45:28 localhost kernel: scsi 9:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
Nov 9 18:45:28 localhost kernel: sd 9:0:0:0: Attached scsi generic sg9 type 0
Nov 9 18:45:28 localhost kernel: sd 9:0:0:0: [sdi] 1981440 512-byte logical blocks: (1.01 GB/967 MiB)
Nov 9 18:45:28 localhost kernel: sd 9:0:0:0: [sdi] Write Protect is off
Nov 9 18:45:28 localhost kernel: sd 9:0:0:0: [sdi] Assuming drive cache: write through
Nov 9 18:45:28 localhost kernel: sd 9:0:0:0: [sdi] Assuming drive cache: write through
Nov 9 18:45:28 localhost kernel: sdi: sdi1
Nov 9 18:45:28 localhost kernel: sd 9:0:0:0: [sdi] Assuming drive cache: write through
Nov 9 18:45:28 localhost kernel: sd 9:0:0:0: [sdi] Attached SCSI disk
Nov 9 18:45:36 localhost kernel: warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
Nov 9 18:46:16 localhost drakconf.real[4004]: ### Program is starting ###
Nov 9 18:46:25 localhost drakconf.real[4026]: ### Program is starting ###
Nov 9 18:46:42 localhost userdrake[4084]: ### Program is starting ###
Nov 9 18:47:46 localhost drakconf.real[4026]: modified file /etc/mcc.conf
Nov 9 18:47:48 localhost kernel: [fglrx] IRQ 45 Disabled
Nov 9 18:47:49 localhost acpid: client 1236[0:0] has disconnected
Nov 9 18:47:49 localhost acpid: client connected from 4198[0:0]
Nov 9 18:47:49 localhost acpid: 1 client rule loaded
Nov 9 18:47:49 localhost kernel: [fglrx] Firegl kernel thread PID: 4202
Nov 9 18:47:49 localhost kernel: [fglrx] Firegl kernel thread PID: 4203
Nov 9 18:47:49 localhost kernel: [fglrx] Firegl kernel thread PID: 4204
Nov 9 18:47:49 localhost kernel: [fglrx] IRQ 45 Enabled
Nov 9 18:47:50 localhost kernel: [fglrx] Gart USWC size:1240 M.
Nov 9 18:47:50 localhost kernel: [fglrx] Gart cacheable size:491 M.
Nov 9 18:47:50 localhost kernel: [fglrx] Reserved FB block: Shared offset:0, size:1000000
Nov 9 18:47:50 localhost kernel: [fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
Nov 9 18:47:50 localhost kernel: [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
Nov 9 18:47:53 localhost rtkit-daemon[2931]: Successfully made thread 4264 of process 4264 (/usr/bin/pulseaudio) owned by '491' high priority at nice level -11.
Nov 9 18:47:53 localhost rtkit-daemon[2931]: Successfully made thread 4266 of process 4264 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 18:47:53 localhost rtkit-daemon[2931]: Successfully made thread 4272 of process 4264 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 18:47:53 localhost rtkit-daemon[2931]: Successfully made thread 4273 of process 4264 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 18:47:53 localhost rtkit-daemon[2931]: Successfully made thread 4274 of process 4264 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 18:48:07 localhost gnome-session[4293]: EggSMClient-WARNING: Desktop file '/home/lesfouiz/.config/autostart/cairo-dock-cairo.desktop' has malformed Icon key 'cairo-dock.svg'(should not include extension)
Nov 9 18:48:07 localhost rtkit-daemon[2931]: Successfully made thread 4452 of process 4452 (/usr/bin/pulseaudio) owned by '500' high priority at nice level -11.
Nov 9 18:48:07 localhost pulseaudio[4452]: pid.c: Daemon already running.
Nov 9 18:48:07 localhost pulseaudio[2928]: x11wrap.c: XOpenDisplay() failed
Nov 9 18:48:07 localhost pulseaudio[2928]: module.c: Failed to load module "module-x11-publish" (argument: "display=:0"): initialization failed.
Nov 9 18:48:09 localhost net_applet[4509]: ### Program is starting ###
Nov 9 18:48:09 localhost mgaapplet[4493]: ### Program is starting ###
Nov 9 18:48:10 localhost mgaapplet[4493]: running: ionice -p 4493 -n7
Nov 9 18:48:10 localhost dbus-daemon: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.84" (uid=500 pid=4473 comm="nautilus) interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply=0 destination=":1.1" (uid=0 pid=987 comm="/usr/sbin/console-kit-daemon))
Nov 9 18:50:02 localhost ntfs-3g[4970]: Version 2011.1.15 external FUSE 28
Nov 9 18:50:02 localhost ntfs-3g[4970]: Mounted /dev/sdc1 (Read-Write, label "NOS DOCUMENTS", NTFS 3.1)
Nov 9 18:50:02 localhost ntfs-3g[4970]: Cmdline options: rw,nosuid,nodev,uhelper=udisks,uid=500,gid=500,dmask=0077,fmask=0177
Nov 9 18:50:02 localhost ntfs-3g[4970]: Mount options: rw,nosuid,nodev,uhelper=udisks,allow_other,nonempty,relatime,fsname=/dev/sdc1,blkdev,blksize=4096,default_permissions
Nov 9 18:50:02 localhost ntfs-3g[4970]: Global ownership and permissions enforced, configuration type 1
Nov 9 18:50:21 localhost ntfs-3g[4970]: Could not convert filename to Unicode: 'RIFF6.�': Invalid or incomplete multibyte or wide character
Nov 9 18:51:44 localhost kernel: usb 1-1.6: USB disconnect, address 4
Nov 9 18:53:11 localhost mgaapplet[4493]: trying distributions list from https://releases.mageia.org/api/a/x86_64?product=Default&version=1&mgaonline_version=2.77.29
Nov 9 18:53:11 localhost mgaapplet[4493]: Computing new updates...
Nov 9 18:53:11 localhost mgaapplet[4493]: running: urpmi.update --update
Nov 9 18:53:25 localhost mgaapplet[4493]: updating inactive backport media Core Backports, Core Backports Testing, Nonfree Backports, Nonfree Backports Testing, Tainted Backports, Tainted Backports Testing, Core 32bit Backports, Core 32bit Backports Testing, Core Backports (distrib7), Core Backports Testing (distrib9), Nonfree Backports (distrib17), Nonfree Backports Testing (distrib19), Tainted Backports (distrib27), Tainted Backports Testing (distrib29), Core 32bit Backports (distrib37), Core 32bit Backports Testing (distrib39)
Nov 9 18:53:25 localhost mgaapplet[4493]: running: urpmi.update Core Backports
Nov 9 18:53:27 localhost mgaapplet[4493]: running: urpmi.update Core Backports Testing
Nov 9 18:53:29 localhost mgaapplet[4493]: running: urpmi.update Nonfree Backports
Nov 9 18:53:31 localhost mgaapplet[4493]: running: urpmi.update Nonfree Backports Testing
Nov 9 18:53:33 localhost mgaapplet[4493]: running: urpmi.update Tainted Backports
Nov 9 18:53:35 localhost mgaapplet[4493]: running: urpmi.update Tainted Backports Testing
Nov 9 18:53:37 localhost mgaapplet[4493]: running: urpmi.update Core 32bit Backports
Nov 9 18:53:39 localhost mgaapplet[4493]: running: urpmi.update Core 32bit Backports Testing
Nov 9 18:53:41 localhost mgaapplet[4493]: running: urpmi.update Core Backports (distrib7)
Nov 9 18:53:43 localhost mgaapplet[4493]: running: urpmi.update Core Backports Testing (distrib9)
Nov 9 18:53:46 localhost mgaapplet[4493]: running: urpmi.update Nonfree Backports (distrib17)
Nov 9 18:53:48 localhost mgaapplet[4493]: running: urpmi.update Nonfree Backports Testing (distrib19)
Nov 9 18:53:50 localhost mgaapplet[4493]: running: urpmi.update Tainted Backports (distrib27)
Nov 9 18:53:52 localhost mgaapplet[4493]: running: urpmi.update Tainted Backports Testing (distrib29)
Nov 9 18:53:54 localhost mgaapplet[4493]: running: urpmi.update Core 32bit Backports (distrib37)
Nov 9 18:53:56 localhost mgaapplet[4493]: running: urpmi.update Core 32bit Backports Testing (distrib39)
Nov 9 18:54:03 localhost mgaapplet[4493]: Packages are up to date
Nov 9 19:01:01 localhost CROND[6715]: (root) CMD (nice -n 19 run-parts --report /etc/cron.hourly)
Nov 9 19:44:46 localhost drakconf.real[13486]: ### Program is starting ###
Nov 9 19:44:49 localhost drakconf.real[13498]: ### Program is starting ###
Nov 9 19:44:55 localhost userdrake[13539]: ### Program is starting ###
Nov 9 19:45:21 localhost userdrake[13539]: Retrait du groupe : vboxuser
Nov 9 19:45:43 localhost userdrake[13669]: ### Program is starting ###
Nov 9 19:46:05 localhost drakconf.real[13498]: modified file /etc/mcc.conf
Nov 9 19:46:13 localhost kernel: [fglrx] IRQ 45 Disabled
Nov 9 19:46:13 localhost acpid: client 4198[0:0] has disconnected
Nov 9 19:46:13 localhost acpid: client connected from 13761[0:0]
Nov 9 19:46:13 localhost acpid: 1 client rule loaded
Nov 9 19:46:13 localhost kernel: [fglrx] Firegl kernel thread PID: 13765
Nov 9 19:46:13 localhost kernel: [fglrx] Firegl kernel thread PID: 13766
Nov 9 19:46:13 localhost kernel: [fglrx] Firegl kernel thread PID: 13767
Nov 9 19:46:13 localhost kernel: [fglrx] IRQ 45 Enabled
Nov 9 19:46:14 localhost kernel: [fglrx] Gart USWC size:1240 M.
Nov 9 19:46:14 localhost kernel: [fglrx] Gart cacheable size:491 M.
Nov 9 19:46:14 localhost kernel: [fglrx] Reserved FB block: Shared offset:0, size:1000000
Nov 9 19:46:14 localhost kernel: [fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
Nov 9 19:46:14 localhost kernel: [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
Nov 9 19:46:17 localhost rtkit-daemon[2931]: Successfully made thread 13827 of process 13827 (/usr/bin/pulseaudio) owned by '491' high priority at nice level -11.
Nov 9 19:46:17 localhost pulseaudio[13827]: pid.c: Stale PID file, overwriting.
Nov 9 19:46:17 localhost rtkit-daemon[2931]: Successfully made thread 13828 of process 13827 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:46:18 localhost rtkit-daemon[2931]: Successfully made thread 13838 of process 13827 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:46:18 localhost rtkit-daemon[2931]: Successfully made thread 13839 of process 13827 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:46:18 localhost rtkit-daemon[2931]: Successfully made thread 13840 of process 13827 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:46:25 localhost gnome-session[13854]: EggSMClient-WARNING: Desktop file '/home/lesfouiz/.config/autostart/cairo-dock-cairo.desktop' has malformed Icon key 'cairo-dock.svg'(should not include extension)
Nov 9 19:46:25 localhost rtkit-daemon[2931]: Successfully made thread 14013 of process 14013 (/usr/bin/pulseaudio) owned by '500' high priority at nice level -11.
Nov 9 19:46:25 localhost pulseaudio[14013]: pid.c: Daemon already running.
Nov 9 19:46:25 localhost pulseaudio[2928]: x11wrap.c: XOpenDisplay() failed
Nov 9 19:46:25 localhost pulseaudio[2928]: module.c: Failed to load module "module-x11-publish" (argument: "display=:0"): initialization failed.
Nov 9 19:46:27 localhost mgaapplet[14055]: ### Program is starting ###
Nov 9 19:46:27 localhost net_applet[14078]: ### Program is starting ###
Nov 9 19:46:28 localhost dbus-daemon: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.112" (uid=500 pid=14034 comm="nautilus) interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply=0 destination=":1.1" (uid=0 pid=987 comm="/usr/sbin/console-kit-daemon))
Nov 9 19:46:28 localhost mgaapplet[14055]: running: ionice -p 14055 -n7
Nov 9 19:46:34 localhost drakconf.real[14175]: ### Program is starting ###
Nov 9 19:46:37 localhost drakconf.real[14188]: ### Program is starting ###
Nov 9 19:46:44 localhost userdrake[14221]: ### Program is starting ###
Nov 9 19:47:42 localhost userdrake[14221]: Ajout du groupe : vbosusers
Nov 9 19:48:01 localhost userdrake[14343]: ### Program is starting ###
Nov 9 19:48:33 localhost drakconf.real[14188]: modified file /etc/mcc.conf
Nov 9 19:48:36 localhost kernel: [fglrx] IRQ 45 Disabled
Nov 9 19:48:36 localhost acpid: client 13761[0:0] has disconnected
Nov 9 19:48:36 localhost acpid: client connected from 14410[0:0]
Nov 9 19:48:36 localhost acpid: 1 client rule loaded
Nov 9 19:48:37 localhost kernel: [fglrx] Firegl kernel thread PID: 14414
Nov 9 19:48:37 localhost kernel: [fglrx] Firegl kernel thread PID: 14415
Nov 9 19:48:37 localhost kernel: [fglrx] Firegl kernel thread PID: 14416
Nov 9 19:48:37 localhost kernel: [fglrx] IRQ 45 Enabled
Nov 9 19:48:37 localhost kernel: [fglrx] Gart USWC size:1240 M.
Nov 9 19:48:37 localhost kernel: [fglrx] Gart cacheable size:491 M.
Nov 9 19:48:37 localhost kernel: [fglrx] Reserved FB block: Shared offset:0, size:1000000
Nov 9 19:48:37 localhost kernel: [fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
Nov 9 19:48:37 localhost kernel: [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
Nov 9 19:48:41 localhost rtkit-daemon[2931]: Successfully made thread 14476 of process 14476 (/usr/bin/pulseaudio) owned by '491' high priority at nice level -11.
Nov 9 19:48:41 localhost rtkit-daemon[2931]: Successfully made thread 14477 of process 14476 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:48:41 localhost rtkit-daemon[2931]: Successfully made thread 14484 of process 14476 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:48:41 localhost rtkit-daemon[2931]: Successfully made thread 14485 of process 14476 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:48:41 localhost rtkit-daemon[2931]: Successfully made thread 14486 of process 14476 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 9 19:48:48 localhost gnome-session[14503]: EggSMClient-WARNING: Desktop file '/home/lesfouiz/.config/autostart/cairo-dock-cairo.desktop' has malformed Icon key 'cairo-dock.svg'(should not include extension)
Nov 9 19:48:48 localhost rtkit-daemon[2931]: Successfully made thread 14662 of process 14662 (/usr/bin/pulseaudio) owned by '500' high priority at nice level -11.
Nov 9 19:48:48 localhost pulseaudio[14662]: pid.c: Daemon already running.
Nov 9 19:48:48 localhost pulseaudio[2928]: x11wrap.c: XOpenDisplay() failed
Nov 9 19:48:48 localhost pulseaudio[2928]: module.c: Failed to load module "module-x11-publish" (argument: "display=:0"): initialization failed.
Nov 9 19:48:50 localhost mgaapplet[14713]: ### Program is starting ###
Nov 9 19:48:50 localhost net_applet[14729]: ### Program is starting ###
Nov 9 19:48:50 localhost dbus-daemon: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.140" (uid=500 pid=14691 comm="nautilus) interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply=0 destination=":1.1" (uid=0 pid=987 comm="/usr/sbin/console-kit-daemon))
Nov 9 19:48:51 localhost mgaapplet[14713]: running: ionice -p 14713 -n7
Nov 9 19:49:26 localhost kernel: usb 1-1.6: new high speed USB device using ehci_hcd and address 5
Nov 9 19:49:26 localhost kernel: usb 1-1.6: New USB device found, idVendor=090c, idProduct=1000
Nov 9 19:49:26 localhost kernel: usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 9 19:49:26 localhost kernel: usb 1-1.6: Product: Flash Disk
Nov 9 19:49:26 localhost kernel: usb 1-1.6: SerialNumber: AA04012700015834
Nov 9 19:49:26 localhost kernel: scsi10 : usb-storage 1-1.6:1.0
Nov 9 19:49:26 localhost mtp-probe: checking bus 1, device 5: "/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6"
Nov 9 19:49:26 localhost mtp-probe: bus: 1, device: 5 was not an MTP device
Nov 9 19:49:27 localhost kernel: scsi 10:0:0:0: Direct-Access USB Flash Disk 1100 PQ: 0 ANSI: 0 CCS
Nov 9 19:49:27 localhost kernel: sd 10:0:0:0: Attached scsi generic sg9 type 0
Nov 9 19:49:27 localhost kernel: sd 10:0:0:0: [sdi] 1981440 512-byte logical blocks: (1.01 GB/967 MiB)
Nov 9 19:49:27 localhost kernel: sd 10:0:0:0: [sdi] Write Protect is off
Nov 9 19:49:27 localhost kernel: sd 10:0:0:0: [sdi] Assuming drive cache: write through
Nov 9 19:49:27 localhost kernel: sd 10:0:0:0: [sdi] Assuming drive cache: write through
Nov 9 19:49:27 localhost kernel: sdi: sdi1
Nov 9 19:49:27 localhost kernel: sd 10:0:0:0: [sdi] Assuming drive cache: write through
Nov 9 19:49:27 localhost kernel: sd 10:0:0:0: [sdi] Attached SCSI disk
Nov 9 19:53:51 localhost mgaapplet[14713]: trying distributions list from https://releases.mageia.org/api/a/x86_64?product=Default&version=1&mgaonline_version=2.77.29
Nov 9 19:53:52 localhost mgaapplet[14713]: Computing new updates...
Nov 9 19:53:52 localhost mgaapplet[14713]: running: urpmi.update --update
Nov 9 19:54:06 localhost mgaapplet[14713]: updating inactive backport media Core Backports, Core Backports Testing, Nonfree Backports, Nonfree Backports Testing, Tainted Backports, Tainted Backports Testing, Core 32bit Backports, Core 32bit Backports Testing, Core Backports (distrib7), Core Backports Testing (distrib9), Nonfree Backports (distrib17), Nonfree Backports Testing (distrib19), Tainted Backports (distrib27), Tainted Backports Testing (distrib29), Core 32bit Backports (distrib37), Core 32bit Backports Testing (distrib39)
Nov 9 19:54:06 localhost mgaapplet[14713]: running: urpmi.update Core Backports
Nov 9 19:54:08 localhost mgaapplet[14713]: running: urpmi.update Core Backports Testing
Nov 9 19:54:11 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports
Nov 9 19:54:13 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports Testing
Nov 9 19:54:15 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports
Nov 9 19:54:17 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports Testing
Nov 9 19:54:19 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports
Nov 9 19:54:22 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports Testing
Nov 9 19:54:24 localhost mgaapplet[14713]: running: urpmi.update Core Backports (distrib7)
Nov 9 19:54:26 localhost mgaapplet[14713]: running: urpmi.update Core Backports Testing (distrib9)
Nov 9 19:54:28 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports (distrib17)
Nov 9 19:54:30 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports Testing (distrib19)
Nov 9 19:54:33 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports (distrib27)
Nov 9 19:54:35 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports Testing (distrib29)
Nov 9 19:54:37 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports (distrib37)
Nov 9 19:54:39 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports Testing (distrib39)
Nov 9 19:54:42 localhost mgaapplet[14713]: Packages are up to date
Nov 9 19:55:56 localhost kernel: WARNING! power/level is deprecated; use power/control instead
Nov 9 19:55:56 localhost kernel: usb 1-1.6: USB disconnect, address 5
Nov 9 20:01:01 localhost CROND[16776]: (root) CMD (nice -n 19 run-parts --report /etc/cron.hourly)
Nov 9 21:01:01 localhost CROND[26334]: (root) CMD (nice -n 19 run-parts --report /etc/cron.hourly)
Nov 9 22:01:01 localhost CROND[3516]: (root) CMD (nice -n 19 run-parts --report /etc/cron.hourly)
Nov 9 22:53:51 localhost mgaapplet[14713]: Computing new updates...
Nov 9 22:53:51 localhost mgaapplet[14713]: running: urpmi.update --update
Nov 9 22:54:04 localhost mgaapplet[14713]: updating inactive backport media Core Backports, Core Backports Testing, Nonfree Backports, Nonfree Backports Testing, Tainted Backports, Tainted Backports Testing, Core 32bit Backports, Core 32bit Backports Testing, Core Backports (distrib7), Core Backports Testing (distrib9), Nonfree Backports (distrib17), Nonfree Backports Testing (distrib19), Tainted Backports (distrib27), Tainted Backports Testing (distrib29), Core 32bit Backports (distrib37), Core 32bit Backports Testing (distrib39)
Nov 9 22:54:04 localhost mgaapplet[14713]: running: urpmi.update Core Backports
Nov 9 22:54:06 localhost mgaapplet[14713]: running: urpmi.update Core Backports Testing
Nov 9 22:54:08 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports
Nov 9 22:54:11 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports Testing
Nov 9 22:54:13 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports
Nov 9 22:54:15 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports Testing
Nov 9 22:54:17 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports
Nov 9 22:54:19 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports Testing
Nov 9 22:54:21 localhost mgaapplet[14713]: running: urpmi.update Core Backports (distrib7)
Nov 9 22:54:23 localhost mgaapplet[14713]: running: urpmi.update Core Backports Testing (distrib9)
Nov 9 22:54:25 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports (distrib17)
Nov 9 22:54:27 localhost mgaapplet[14713]: running: urpmi.update Nonfree Backports Testing (distrib19)
Nov 9 22:54:28 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports (distrib27)
Nov 9 22:54:30 localhost mgaapplet[14713]: running: urpmi.update Tainted Backports Testing (distrib29)
Nov 9 22:54:32 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports (distrib37)
Nov 9 22:54:34 localhost mgaapplet[14713]: running: urpmi.update Core 32bit Backports Testing (distrib39)
Nov 9 22:54:37 localhost mgaapplet[14713]: Packages are up to date
Nov 9 23:01:01 localhost CROND[13504]: (root) CMD (nice -n 19 run-parts --report /etc/cron.hourly)
C'est grave docteur ?
Modération LM22 : Bonsoir; pour une bonne lisibilité, il est préférable d'utiliser les balises petit cadenas[hide][/hide]
Merci
, 
paradise Membre non connecté
-
- Voir le profil du membre paradise
- Inscrit le : 08/06/2011
- Groupes :
Édité par paradise Le 12/11/2011 à 01h38
NESTO Membre non connecté
-
- Voir le profil du membre NESTO
- Inscrit le : 04/03/2010
- Groupes :
Désolé j'avais mal compris.
J'ai branché le téléphone, j'ai le message d'erreur puis j'ai tapé en root sur la console :
dmesg et ensuite cat /var/log/messages
Voici les résultats pour dmesg :
Caché :
pci 0000:00:1c.6: bridge window [mem 0xf0c00000-0xf0dfffff 64bit pref]
pci 0000:00:1c.7: PCI bridge to [bus 02-02]
pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.7: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.7: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07-07]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0104 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: enabling device (0104 -> 0107)
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: enabling device (0104 -> 0107)
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0xf0000000-0xf01fffff]
pci_bus 0000:06: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf05fffff]
pci_bus 0000:05: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xf0800000-0xf09fffff]
pci_bus 0000:04: resource 2 [mem 0xf0a00000-0xf0bfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:03: resource 2 [mem 0xf0c00000-0xf0dfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:07: resource 9 [mem 0xfc000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5008k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800dbc00000 - ffff8800dfc00000
software IO TLB at phys 0xdbc00000 - 0xdfc00000
audit: initializing netlink socket (disabled)
type=2000 audit(1321122335.441:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7921
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 1875k, total 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
PM: Checking hibernation image partition UUID=79bb7e46-5fb2-4af6-85f4-b698819845ef
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 3:217:443
pcieport 0000:00:1c.4: hash matches
rtc_cmos 00:03: setting system clock to 2011-11-12 18:25:37 UTC (1321122337)
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
Freeing unused kernel memory: 724k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 8k freed
Freeing unused kernel memory: 80k freed
Refined TSC clocksource calibration: 2808.714 MHz.
Switching to clocksource tsc
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7bfe000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.8-desktop-8.mga ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7bfd000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.8-desktop-8.mga ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21
ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21
ata_piix 0000:00:1f.5: PCI INT D -> GSI 21 (level, low) -> IRQ 21
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
usb 1-1: new high speed USB device using ehci_hcd and address 2
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max UDMA/133
ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
CE: hpet2 increased min_delta_ns to 7500 nsec
CE: hpet2 increased min_delta_ns to 11250 nsec
hrtimer: interrupt took 3211 ns
ata3.00: configured for UDMA/133
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.2: new high speed USB device using ehci_hcd and address 3
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: HPA detected: current 1953523055, native 1953525168
ata2.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
ata2.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: ATAPI: PLEXTOR DVDR PX-820SA, 1.01, max UDMA/100
ata2.00: configured for UDMA/133
ata2.01: configured for UDMA/100
ata1.00: HPA detected: current 321670847, native 321672960
ata1.00: ATA-6: HDS722516VLSA80, V34OA6MA, max UDMA/100
ata1.00: 321670847 sectors, multi 16: LBA48
ata1.01: HPA detected: current 321670847, native 321672960
ata1.01: ATA-6: HDS722516VLSA80, V34OA6MA, max UDMA/100
ata1.01: 321670847 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HDS722516VLSA80 V34O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 321670847 512-byte logical blocks: (164 GB/153 GiB)
scsi 0:0:1:0: Direct-Access ATA HDS722516VLSA80 V34O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] 321670847 512-byte logical blocks: (164 GB/153 GiB)
scsi 1:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM PLEXTOR DVDR PX-820SA 1.01 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdc] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA WDC WD6400AAKS-2 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdd] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 2:0:0:0: [sdd] Write Protect is off
sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
sdc: sdc1
sd 1:0:0:0: [sdc] Attached SCSI disk
sdd: sdd1 sdd2 < sdd5 sdd6 >
sd 2:0:0:0: [sdd] Attached SCSI disk
sdb: sdb1 sdb2 < sdb5 sdb6 >
sd 0:0:1:0: [sdb] Attached SCSI disk
ahci 0000:03:00.0: version 3.0
ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi4 : ahci
scsi5 : ahci
ata5: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe100 irq 18
ata6: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe180 irq 18
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
pata_acpi 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pata_acpi 0000:03:00.1: setting latency timer to 64
pata_acpi 0000:03:00.1: PCI INT B disabled
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi6 : pata_jmicron
scsi7 : pata_jmicron
ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0151
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: USB2.0-CRW
usb 1-1.2: Manufacturer: Generic
usb 1-1.2: SerialNumber: 20060413092100000
usb 2-1.6: new full speed USB device using ehci_hcd and address 3
usb 2-1.6: New USB device found, idVendor=046d, idProduct=c068
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: Product: G500
usb 2-1.6: Manufacturer: Logitech
usb 2-1.6: SerialNumber: BAC05033E40018
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input0
generic-usb 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.0-1.6/input0
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input1
generic-usb 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.0-1.6/input1
usb 2-1.8: new low speed USB device using ehci_hcd and address 4
usb 2-1.8: New USB device found, idVendor=046d, idProduct=c30e
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8: Product: HID compliant keyboard
usb 2-1.8: Manufacturer: Logitech
input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input2
generic-usb 0003:046D:C30E.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1.8/input0
input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input3
generic-usb 0003:046D:C30E.0004: input,hidraw3: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1.8/input1
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: acl
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
CE: hpet3 increased min_delta_ns to 7500 nsec
CE: hpet3 increased min_delta_ns to 11250 nsec
udev[149]: starting version 166
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: Attached scsi generic sg2 type 0
scsi 1:0:1:0: Attached scsi generic sg3 type 5
sd 2:0:0:0: Attached scsi generic sg4 type 0
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
ACPI: acpi_idle yielding to intel_idle
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ATK0110 ATK0110:00: EC enabled
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 45 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90000676000, 20:cf:30:1b:d8:6e, XID 083000c0 IRQ 45
Linux video capture interface: v2.00
iTCO_vendor_support: vendor-support=0
saa7130/34: v4l2 driver version 0.2.16 loaded
saa7134 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
saa7133[0]: found at 0000:07:01.0, rev: 209, irq: 16, latency: 64, mmio: 0xf7fff800
saa7133[0]: subsystem: 1461:f01d, board: Avermedia Super 007 [card=117,autodetected]
saa7133[0]: board init: gpio is 40000
IR NEC protocol handler initialized
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
Initializing USB Mass Storage driver...
scsi8 : usb-storage 1-1.2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
saa7133[0]: i2c eeprom 00: 61 14 1d f0 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 55 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 02 15 16 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
usbcore: registered new interface driver uas
IR JVC protocol handler initialized
tuner 1-004b: chip found @ 0x96 (saa7133[0])
IR Sony protocol handler initialized
tda829x 1-004b: setting tuner address to 60
lirc_dev: IR Remote Control driver registered, major 250
tda829x 1-004b: type set to tda8290+75a
IR LIRC bridge handler initialized
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
autoconfig: line_outs=4 (0x24/0x25/0x26/0x27/0x0)
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x2d/0x2e
inputs:
scsi 8:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg5 type 0
scsi 8:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:1: Attached scsi generic sg6 type 0
scsi 8:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:2: Attached scsi generic sg7 type 0
scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:3: Attached scsi generic sg8 type 0
sd 8:0:0:0: [sde] Attached SCSI removable disk
sd 8:0:0:1: [sdf] Attached SCSI removable disk
sd 8:0:0:2: [sdg] Attached SCSI removable disk
sd 8:0:0:3: [sdh] Attached SCSI removable disk
hda-codec: no NID for mapping control Independent HP:0:0
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: irq 47 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
CE: hpet4 increased min_delta_ns to 7500 nsec
CE: hpet4 increased min_delta_ns to 11250 nsec
saa7133[0]: dsp access error
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
firewire_ohci 0000:07:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
dvb_init() allocating 1 frontend
DVB: registering new adapter (saa7133[0])
DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
firewire_ohci: Added fw-ohci device 0000:07:04.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
tda1004x: setting up plls for 48MHz sampling clock
firewire_core: created device fw0: GUID 001e8c0000dbb635, S400
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
EXT4-fs (sdd1): re-mounted. Opts: acl
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: trying to boot from eeprom
EXT4-fs (sdd6): mounted filesystem with ordered data mode. Opts: acl
fuse init (API version 7.16)
loop: module loaded
Adding 4088504k swap on /dev/sdd5. Priority:-1 extents:1 across:4088504k
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: waiting for firmware upload...
tda1004x: no firmware upload (timeout or file not found?)
tda1004x: firmware upload failed
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xf7fff800 irq 16 registered as card -1
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 3799 MBytes.
[fglrx] vendor: 1002 device: 9442 count: 1
[fglrx] ioport: bar 4, base 0xb000, size: 0x100
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors
CE: hpet5 increased min_delta_ns to 7500 nsec
CE: hpet5 increased min_delta_ns to 11250 nsec
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x1d1 offMax=0x55a7
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.14_OSE (interface 0x00180000).
NET: Registered protocol family 10
r8169 0000:02:00.0: eth0: unable to apply firmware patch rtl_nic/rtl8168d-2.fw
r8169 0000:02:00.0: eth0: link down
r8169 0000:02:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
fglrx_pci 0000:01:00.0: irq 48 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 8909
[fglrx] Firegl kernel thread PID: 8910
[fglrx] Firegl kernel thread PID: 8911
[fglrx] IRQ 48 Enabled
r8169 0000:02:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[fglrx] Gart USWC size:1240 M.
[fglrx] Gart cacheable size:491 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
[fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
NET: Registered protocol family 17
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
xt_time: kernel timezone is +0100
IFWLOG: register target
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
ata1: EH complete
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
ata1: EH complete
ata2.00: configured for UDMA/133
ata2.01: configured for UDMA/100
ata2: EH complete
ata3.00: configured for UDMA/133
ata3: EH complete
EXT4-fs (sdd1): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd6): re-mounted. Opts: acl,commit=0
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
eth0: no IPv6 routers present
usb 1-1.5: new high speed USB device using ehci_hcd and address 4
usb 1-1.5: New USB device found, idVendor=04e8, idProduct=6860
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: Wave II
usb 1-1.5: Manufacturer: Samsung Electronics
cdc_acm 1-1.5:1.1: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usb 1-1.5: usbfs: process 21014 (gvfsd-gphoto2) did not claim interface 0 before use
usb 1-1.5: usbfs: process 21014 (gvfsd-gphoto2) did not claim interface 0 before use
usb 1-1.5: usbfs: process 21014 (gvfsd-gphoto2) did not claim interface 0 before use
usb 1-1.5: usbfs: process 21014 (gvfsd-gphoto2) did not claim interface 0 before use
usb 1-1.5: usbfs: process 21014 (gvfsd-gphoto2) did not claim interface 0 before use
usb 1-1.5: usbfs: process 21014 (gvfsd-gphoto2) did not claim interface 0 before use
pci 0000:00:1c.7: PCI bridge to [bus 02-02]
pci 0000:00:1c.7: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.7: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.7: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 07-07]
pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
pci 0000:00:1e.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:1c.0: enabling device (0104 -> 0107)
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.4: enabling device (0104 -> 0107)
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: enabling device (0104 -> 0107)
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:00:1c.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.7: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:00: resource 9 [mem 0xfc000000-0xfed8ffff]
pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
pci_bus 0000:01: resource 1 [mem 0xf7c00000-0xf7cfffff]
pci_bus 0000:01: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0xf0000000-0xf01fffff]
pci_bus 0000:06: resource 2 [mem 0xf0200000-0xf03fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xf0400000-0xf05fffff]
pci_bus 0000:05: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:04: resource 1 [mem 0xf0800000-0xf09fffff]
pci_bus 0000:04: resource 2 [mem 0xf0a00000-0xf0bfffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:03: resource 2 [mem 0xf0c00000-0xf0dfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xe000-0xefff]
pci_bus 0000:07: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:07: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:07: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:07: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:07: resource 7 [mem 0x000d0000-0x000dffff]
pci_bus 0000:07: resource 8 [mem 0xe0000000-0xf7ffffff]
pci_bus 0000:07: resource 9 [mem 0xfc000000-0xfed8ffff]
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:01:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 5008k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff8800dbc00000 - ffff8800dfc00000
software IO TLB at phys 0xdbc00000 - 0xdfc00000
audit: initializing netlink socket (disabled)
type=2000 audit(1321122335.441:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 7921
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 1875k, total 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x1E
intel_idle: lapic_timer_reliable_states 0x2
ERST: Table is not found!
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
Registering the dns_resolver key type
PM: Checking hibernation image partition UUID=79bb7e46-5fb2-4af6-85f4-b698819845ef
PM: Hibernation image not present or could not be loaded.
registered taskstats version 1
Magic number: 3:217:443
pcieport 0000:00:1c.4: hash matches
rtc_cmos 00:03: setting system clock to 2011-11-12 18:25:37 UTC (1321122337)
BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
Freeing unused kernel memory: 724k freed
Write protecting the kernel read-only data: 6144k
Freeing unused kernel memory: 8k freed
Freeing unused kernel memory: 80k freed
Refined TSC clocksource calibration: 2808.714 MHz.
Switching to clocksource tsc
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7bfe000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.38.8-desktop-8.mga ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7bfd000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.38.8-desktop-8.mga ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
SCSI subsystem initialized
libata version 3.00 loaded.
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
ata_piix 0000:00:1f.2: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21
ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21
ata_piix 0000:00:1f.5: PCI INT D -> GSI 21 (level, low) -> IRQ 21
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
ata_piix 0000:00:1f.5: setting latency timer to 64
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
usb 1-1: new high speed USB device using ehci_hcd and address 2
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high speed USB device using ehci_hcd and address 2
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max UDMA/133
ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
CE: hpet2 increased min_delta_ns to 7500 nsec
CE: hpet2 increased min_delta_ns to 11250 nsec
hrtimer: interrupt took 3211 ns
ata3.00: configured for UDMA/133
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 1-1.2: new high speed USB device using ehci_hcd and address 3
ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: HPA detected: current 1953523055, native 1953525168
ata2.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
ata2.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.01: ATAPI: PLEXTOR DVDR PX-820SA, 1.01, max UDMA/100
ata2.00: configured for UDMA/133
ata2.01: configured for UDMA/100
ata1.00: HPA detected: current 321670847, native 321672960
ata1.00: ATA-6: HDS722516VLSA80, V34OA6MA, max UDMA/100
ata1.00: 321670847 sectors, multi 16: LBA48
ata1.01: HPA detected: current 321670847, native 321672960
ata1.01: ATA-6: HDS722516VLSA80, V34OA6MA, max UDMA/100
ata1.01: 321670847 sectors, multi 16: LBA48
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA HDS722516VLSA80 V34O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 321670847 512-byte logical blocks: (164 GB/153 GiB)
scsi 0:0:1:0: Direct-Access ATA HDS722516VLSA80 V34O PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:1:0: [sdb] 321670847 512-byte logical blocks: (164 GB/153 GiB)
scsi 1:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
scsi 1:0:1:0: CD-ROM PLEXTOR DVDR PX-820SA 1.01 PQ: 0 ANSI: 5
sd 1:0:0:0: [sdc] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
sd 1:0:0:0: [sdc] Write Protect is off
sd 1:0:0:0: [sdc] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 2:0:0:0: Direct-Access ATA WDC WD6400AAKS-2 01.0 PQ: 0 ANSI: 5
sd 2:0:0:0: [sdd] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
sd 2:0:0:0: [sdd] Write Protect is off
sd 2:0:0:0: [sdd] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:0:1:0: [sdb] Write Protect is off
sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00
sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sd 0:0:0:0: [sda] Attached SCSI disk
sdc: sdc1
sd 1:0:0:0: [sdc] Attached SCSI disk
sdd: sdd1 sdd2 < sdd5 sdd6 >
sd 2:0:0:0: [sdd] Attached SCSI disk
sdb: sdb1 sdb2 < sdb5 sdb6 >
sd 0:0:1:0: [sdb] Attached SCSI disk
ahci 0000:03:00.0: version 3.0
ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
ahci 0000:03:00.0: setting latency timer to 64
scsi4 : ahci
scsi5 : ahci
ata5: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe100 irq 18
ata6: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe180 irq 18
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
pata_acpi 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pata_acpi 0000:03:00.1: setting latency timer to 64
pata_acpi 0000:03:00.1: PCI INT B disabled
Uniform Multi-Platform E-IDE driver
ide-gd driver 1.18
pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
pata_jmicron 0000:03:00.1: setting latency timer to 64
scsi6 : pata_jmicron
scsi7 : pata_jmicron
ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0151
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.2: Product: USB2.0-CRW
usb 1-1.2: Manufacturer: Generic
usb 1-1.2: SerialNumber: 20060413092100000
usb 2-1.6: new full speed USB device using ehci_hcd and address 3
usb 2-1.6: New USB device found, idVendor=046d, idProduct=c068
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.6: Product: G500
usb 2-1.6: Manufacturer: Logitech
usb 2-1.6: SerialNumber: BAC05033E40018
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input0
generic-usb 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.0-1.6/input0
input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input1
generic-usb 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.0-1.6/input1
usb 2-1.8: new low speed USB device using ehci_hcd and address 4
usb 2-1.8: New USB device found, idVendor=046d, idProduct=c30e
usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.8: Product: HID compliant keyboard
usb 2-1.8: Manufacturer: Logitech
input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input2
generic-usb 0003:046D:C30E.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1.8/input0
input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input3
generic-usb 0003:046D:C30E.0004: input,hidraw3: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1.8/input1
EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: acl
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
CE: hpet3 increased min_delta_ns to 7500 nsec
CE: hpet3 increased min_delta_ns to 11250 nsec
udev[149]: starting version 166
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:1:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: Attached scsi generic sg2 type 0
scsi 1:0:1:0: Attached scsi generic sg3 type 5
sd 2:0:0:0: Attached scsi generic sg4 type 0
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:1:0: Attached scsi CD-ROM sr0
ACPI: acpi_idle yielding to intel_idle
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
ACPI: Power Button [PWRF]
ATK0110 ATK0110:00: EC enabled
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
r8169 0000:02:00.0: setting latency timer to 64
r8169 0000:02:00.0: irq 45 for MSI/MSI-X
r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90000676000, 20:cf:30:1b:d8:6e, XID 083000c0 IRQ 45
Linux video capture interface: v2.00
iTCO_vendor_support: vendor-support=0
saa7130/34: v4l2 driver version 0.2.16 loaded
saa7134 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
saa7133[0]: found at 0000:07:01.0, rev: 209, irq: 16, latency: 64, mmio: 0xf7fff800
saa7133[0]: subsystem: 1461:f01d, board: Avermedia Super 007 [card=117,autodetected]
saa7133[0]: board init: gpio is 40000
IR NEC protocol handler initialized
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
Initializing USB Mass Storage driver...
scsi8 : usb-storage 1-1.2:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
IR RC5(x) protocol handler initialized
IR RC6 protocol handler initialized
saa7133[0]: i2c eeprom 00: 61 14 1d f0 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 55 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 02 15 16 ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
i2c-core: driver [tuner] using legacy suspend method
i2c-core: driver [tuner] using legacy resume method
usbcore: registered new interface driver uas
IR JVC protocol handler initialized
tuner 1-004b: chip found @ 0x96 (saa7133[0])
IR Sony protocol handler initialized
tda829x 1-004b: setting tuner address to 60
lirc_dev: IR Remote Control driver registered, major 250
tda829x 1-004b: type set to tda8290+75a
IR LIRC bridge handler initialized
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: irq 46 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
autoconfig: line_outs=4 (0x24/0x25/0x26/0x27/0x0)
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x2d/0x2e
inputs:
scsi 8:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:0: Attached scsi generic sg5 type 0
scsi 8:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:1: Attached scsi generic sg6 type 0
scsi 8:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:2: Attached scsi generic sg7 type 0
scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
sd 8:0:0:3: Attached scsi generic sg8 type 0
sd 8:0:0:0: [sde] Attached SCSI removable disk
sd 8:0:0:1: [sdf] Attached SCSI removable disk
sd 8:0:0:2: [sdg] Attached SCSI removable disk
sd 8:0:0:3: [sdh] Attached SCSI removable disk
hda-codec: no NID for mapping control Independent HP:0:0
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: irq 47 for MSI/MSI-X
HDA Intel 0000:01:00.1: setting latency timer to 64
CE: hpet4 increased min_delta_ns to 7500 nsec
CE: hpet4 increased min_delta_ns to 11250 nsec
saa7133[0]: dsp access error
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
firewire_ohci 0000:07:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
dvb_init() allocating 1 frontend
DVB: registering new adapter (saa7133[0])
DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
firewire_ohci: Added fw-ohci device 0000:07:04.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
tda1004x: setting up plls for 48MHz sampling clock
firewire_core: created device fw0: GUID 001e8c0000dbb635, S400
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
EXT4-fs (sdd1): re-mounted. Opts: acl
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: trying to boot from eeprom
EXT4-fs (sdd6): mounted filesystem with ordered data mode. Opts: acl
fuse init (API version 7.16)
loop: module loaded
Adding 4088504k swap on /dev/sdd5. Priority:-1 extents:1 across:4088504k
tda1004x: timeout waiting for DSP ready
tda1004x: found firmware revision 0 -- invalid
tda1004x: waiting for firmware upload...
tda1004x: no firmware upload (timeout or file not found?)
tda1004x: firmware upload failed
saa7134 ALSA driver for DMA sound loaded
saa7133[0]/alsa: saa7133[0] at 0xf7fff800 irq 16 registered as card -1
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Disabling lock debugging due to kernel taint
[fglrx] Maximum main memory to use for locked dma buffers: 3799 MBytes.
[fglrx] vendor: 1002 device: 9442 count: 1
[fglrx] ioport: bar 4, base 0xb000, size: 0x100
pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:01:00.0: setting latency timer to 64
[fglrx] Kernel PAT support is enabled
[fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors
CE: hpet5 increased min_delta_ns to 7500 nsec
CE: hpet5 increased min_delta_ns to 11250 nsec
vboxdrv: Found 4 processor cores.
vboxdrv: fAsync=0 offMin=0x1d1 offMax=0x55a7
vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
vboxdrv: Successfully loaded version 4.0.14_OSE (interface 0x00180000).
NET: Registered protocol family 10
r8169 0000:02:00.0: eth0: unable to apply firmware patch rtl_nic/rtl8168d-2.fw
r8169 0000:02:00.0: eth0: link down
r8169 0000:02:00.0: eth0: link down
ADDRCONF(NETDEV_UP): eth0: link is not ready
fglrx_pci 0000:01:00.0: irq 48 for MSI/MSI-X
[fglrx] Firegl kernel thread PID: 8909
[fglrx] Firegl kernel thread PID: 8910
[fglrx] Firegl kernel thread PID: 8911
[fglrx] IRQ 48 Enabled
r8169 0000:02:00.0: eth0: link up
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[fglrx] Gart USWC size:1240 M.
[fglrx] Gart cacheable size:491 M.
[fglrx] Reserved FB block: Shared offset:0, size:1000000
[fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
[fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
NET: Registered protocol family 17
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
NF_TPROXY: Transparent proxy support initialized, version 4.1.0
NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
Netfilter messages via NETLINK v0.30.
ip_set: protocol 6
xt_time: kernel timezone is +0100
IFWLOG: register target
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
ata1: EH complete
ata1.00: configured for UDMA/100
ata1.01: configured for UDMA/100
ata1: EH complete
ata2.00: configured for UDMA/133
ata2.01: configured for UDMA/100
ata2: EH complete
ata3.00: configured for UDMA/133
ata3: EH complete
EXT4-fs (sdd1): re-mounted. Opts: acl,commit=0
EXT4-fs (sdd6): re-mounted. Opts: acl,commit=0
hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
eth0: no IPv6 routers present
usb 1-1.5: new high speed USB device using ehci_hcd and address 4
usb 1-1.5: New USB device found, idVendor=04e8, idProduct=6860
usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.5: Product: Wave II
usb 1-1.5: Manufacturer: Samsung Electronics
cdc_acm 1-1.5:1.1: ttyACM0: USB ACM device
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
usb 1-1.5: usbfs: process 21014 (gvfsd-gphoto2) did not claim interface 0 before use
usb 1-1.5: usbfs: process 21014 (gvfsd-gphoto2) did not claim interface 0 before use
usb 1-1.5: usbfs: process 21014 (gvfsd-gphoto2) did not claim interface 0 before use
usb 1-1.5: usbfs: process 21014 (gvfsd-gphoto2) did not claim interface 0 before use
usb 1-1.5: usbfs: process 21014 (gvfsd-gphoto2) did not claim interface 0 before use
usb 1-1.5: usbfs: process 21014 (gvfsd-gphoto2) did not claim interface 0 before use
Puis pour cat /var/log/messages
<span class="formatter-hide">Caché:</span><div class="hide" onclick="bb_hide(this)"><div class="hide2">Nov 12 18:27:43 localhost kernel: Console: switching to colour frame buffer device 100x37
Nov 12 18:27:43 localhost kernel: fb0: VESA VGA frame buffer device
Nov 12 18:27:43 localhost kernel: ERST: Table is not found!
Nov 12 18:27:43 localhost kernel: Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
Nov 12 18:27:43 localhost kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 12 18:27:43 localhost kernel: 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Nov 12 18:27:43 localhost kernel: Linux agpgart interface v0.103
Nov 12 18:27:43 localhost kernel: brd: module loaded
Nov 12 18:27:43 localhost kernel: i8042: PNP: No PS/2 controller found. Probing ports directly.
Nov 12 18:27:43 localhost kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Nov 12 18:27:43 localhost kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Nov 12 18:27:43 localhost kernel: mousedev: PS/2 mouse device common for all mice
Nov 12 18:27:43 localhost kernel: rtc_cmos 00:03: RTC can wake from S4
Nov 12 18:27:43 localhost kernel: rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
Nov 12 18:27:43 localhost kernel: rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Nov 12 18:27:43 localhost kernel: cpuidle: using governor ladder
Nov 12 18:27:43 localhost kernel: cpuidle: using governor menu
Nov 12 18:27:43 localhost kernel: TCP cubic registered
Nov 12 18:27:43 localhost kernel: Registering the dns_resolver key type
Nov 12 18:27:43 localhost kernel: registered taskstats version 1
Nov 12 18:27:43 localhost kernel: Magic number: 3:217:443
Nov 12 18:27:43 localhost kernel: pcieport 0000:00:1c.4: hash matches
Nov 12 18:27:43 localhost kernel: rtc_cmos 00:03: setting system clock to 2011-11-12 18:25:37 UTC (1321122337)
Nov 12 18:27:43 localhost kernel: BIOS EDD facility v0.16 2004-Jun-25, 4 devices found
Nov 12 18:27:43 localhost kernel: Freeing unused kernel memory: 724k freed
Nov 12 18:27:43 localhost kernel: Write protecting the kernel read-only data: 6144k
Nov 12 18:27:43 localhost kernel: Freeing unused kernel memory: 8k freed
Nov 12 18:27:43 localhost kernel: Freeing unused kernel memory: 80k freed
Nov 12 18:27:43 localhost kernel: Refined TSC clocksource calibration: 2808.714 MHz.
Nov 12 18:27:43 localhost kernel: Switching to clocksource tsc
Nov 12 18:27:43 localhost kernel: usbcore: registered new interface driver usbfs
Nov 12 18:27:43 localhost kernel: usbcore: registered new interface driver hub
Nov 12 18:27:43 localhost kernel: usbcore: registered new device driver usb
Nov 12 18:27:43 localhost kernel: usbcore: registered new interface driver usbhid
Nov 12 18:27:43 localhost kernel: usbhid: USB HID core driver
Nov 12 18:27:43 localhost kernel: ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
Nov 12 18:27:43 localhost kernel: ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Nov 12 18:27:43 localhost kernel: ehci_hcd 0000:00:1a.0: EHCI Host Controller
Nov 12 18:27:43 localhost kernel: ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
Nov 12 18:27:43 localhost kernel: ehci_hcd 0000:00:1a.0: debug port 2
Nov 12 18:27:43 localhost kernel: ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7bfe000
Nov 12 18:27:43 localhost kernel: ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
Nov 12 18:27:43 localhost kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
Nov 12 18:27:43 localhost kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 12 18:27:43 localhost kernel: usb usb1: Product: EHCI Host Controller
Nov 12 18:27:43 localhost kernel: usb usb1: Manufacturer: Linux 2.6.38.8-desktop-8.mga ehci_hcd
Nov 12 18:27:43 localhost kernel: usb usb1: SerialNumber: 0000:00:1a.0
Nov 12 18:27:43 localhost kernel: hub 1-0:1.0: USB hub found
Nov 12 18:27:43 localhost kernel: hub 1-0:1.0: 2 ports detected
Nov 12 18:27:43 localhost kernel: ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
Nov 12 18:27:43 localhost kernel: ehci_hcd 0000:00:1d.0: EHCI Host Controller
Nov 12 18:27:43 localhost kernel: ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
Nov 12 18:27:43 localhost kernel: ehci_hcd 0000:00:1d.0: debug port 2
Nov 12 18:27:43 localhost kernel: ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7bfd000
Nov 12 18:27:43 localhost kernel: ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
Nov 12 18:27:43 localhost kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
Nov 12 18:27:43 localhost kernel: usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 12 18:27:43 localhost kernel: usb usb2: Product: EHCI Host Controller
Nov 12 18:27:43 localhost kernel: usb usb2: Manufacturer: Linux 2.6.38.8-desktop-8.mga ehci_hcd
Nov 12 18:27:43 localhost kernel: usb usb2: SerialNumber: 0000:00:1d.0
Nov 12 18:27:43 localhost kernel: hub 2-0:1.0: USB hub found
Nov 12 18:27:43 localhost kernel: hub 2-0:1.0: 2 ports detected
Nov 12 18:27:43 localhost kernel: ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
Nov 12 18:27:43 localhost kernel: uhci_hcd: USB Universal Host Controller Interface driver
Nov 12 18:27:43 localhost kernel: SCSI subsystem initialized
Nov 12 18:27:43 localhost kernel: ata_piix 0000:00:1f.2: PCI INT D -> GSI 21 (level, low) -> IRQ 21
Nov 12 18:27:43 localhost kernel: ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
Nov 12 18:27:43 localhost kernel: scsi0 : ata_piix
Nov 12 18:27:43 localhost kernel: scsi1 : ata_piix
Nov 12 18:27:43 localhost kernel: ata1: SATA max UDMA/133 cmd 0x9c00 ctl 0x9880 bmdma 0x9400 irq 21
Nov 12 18:27:43 localhost kernel: ata2: SATA max UDMA/133 cmd 0x9800 ctl 0x9480 bmdma 0x9408 irq 21
Nov 12 18:27:43 localhost kernel: ata_piix 0000:00:1f.5: PCI INT D -> GSI 21 (level, low) -> IRQ 21
Nov 12 18:27:43 localhost kernel: ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
Nov 12 18:27:43 localhost kernel: scsi2 : ata_piix
Nov 12 18:27:43 localhost kernel: scsi3 : ata_piix
Nov 12 18:27:43 localhost kernel: ata3: SATA max UDMA/133 cmd 0xac00 ctl 0xa880 bmdma 0xa400 irq 21
Nov 12 18:27:43 localhost kernel: ata4: SATA max UDMA/133 cmd 0xa800 ctl 0xa480 bmdma 0xa408 irq 21
Nov 12 18:27:43 localhost kernel: usb 1-1: new high speed USB device using ehci_hcd and address 2
Nov 12 18:27:43 localhost kernel: ata4: SATA link down (SStatus 0 SControl 300)
Nov 12 18:27:43 localhost kernel: usb 1-1: New USB device found, idVendor=8087, idProduct=0020
Nov 12 18:27:43 localhost kernel: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Nov 12 18:27:43 localhost kernel: hub 1-1:1.0: USB hub found
Nov 12 18:27:43 localhost kernel: hub 1-1:1.0: 6 ports detected
Nov 12 18:27:43 localhost kernel: usb 2-1: new high speed USB device using ehci_hcd and address 2
Nov 12 18:27:43 localhost kernel: ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 12 18:27:43 localhost kernel: ata3.00: ATA-8: WDC WD6400AAKS-22A7B2, 01.03B01, max UDMA/133
Nov 12 18:27:43 localhost kernel: ata3.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 12 18:27:43 localhost kernel: CE: hpet2 increased min_delta_ns to 7500 nsec
Nov 12 18:27:43 localhost kernel: CE: hpet2 increased min_delta_ns to 11250 nsec
Nov 12 18:27:43 localhost kernel: hrtimer: interrupt took 3211 ns
Nov 12 18:27:43 localhost kernel: ata3.00: configured for UDMA/133
Nov 12 18:27:43 localhost kernel: usb 2-1: New USB device found, idVendor=8087, idProduct=0020
Nov 12 18:27:43 localhost kernel: usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Nov 12 18:27:43 localhost kernel: hub 2-1:1.0: USB hub found
Nov 12 18:27:43 localhost kernel: hub 2-1:1.0: 8 ports detected
Nov 12 18:27:43 localhost kernel: usb 1-1.2: new high speed USB device using ehci_hcd and address 3
Nov 12 18:27:43 localhost kernel: ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
Nov 12 18:27:43 localhost kernel: ata2.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 12 18:27:43 localhost kernel: ata1.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 12 18:27:43 localhost kernel: ata1.01: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
Nov 12 18:27:43 localhost kernel: ata2.00: HPA detected: current 1953523055, native 1953525168
Nov 12 18:27:43 localhost kernel: ata2.00: ATA-8: Hitachi HDT721010SLA360, ST6OA31B, max UDMA/133
Nov 12 18:27:43 localhost kernel: ata2.00: 1953523055 sectors, multi 16: LBA48 NCQ (depth 0/32)
Nov 12 18:27:43 localhost kernel: ata2.01: ATAPI: PLEXTOR DVDR PX-820SA, 1.01, max UDMA/100
Nov 12 18:27:43 localhost kernel: ata2.00: configured for UDMA/133
Nov 12 18:27:43 localhost kernel: ata2.01: configured for UDMA/100
Nov 12 18:27:43 localhost kernel: ata1.00: HPA detected: current 321670847, native 321672960
Nov 12 18:27:43 localhost kernel: ata1.00: ATA-6: HDS722516VLSA80, V34OA6MA, max UDMA/100
Nov 12 18:27:43 localhost kernel: ata1.00: 321670847 sectors, multi 16: LBA48
Nov 12 18:27:43 localhost kernel: ata1.01: HPA detected: current 321670847, native 321672960
Nov 12 18:27:43 localhost kernel: ata1.01: ATA-6: HDS722516VLSA80, V34OA6MA, max UDMA/100
Nov 12 18:27:43 localhost kernel: ata1.01: 321670847 sectors, multi 16: LBA48
Nov 12 18:27:43 localhost kernel: ata1.00: configured for UDMA/100
Nov 12 18:27:43 localhost kernel: ata1.01: configured for UDMA/100
Nov 12 18:27:43 localhost kernel: scsi 0:0:0:0: Direct-Access ATA HDS722516VLSA80 V34O PQ: 0 ANSI: 5
Nov 12 18:27:43 localhost kernel: sd 0:0:0:0: [sda] 321670847 512-byte logical blocks: (164 GB/153 GiB)
Nov 12 18:27:43 localhost kernel: scsi 0:0:1:0: Direct-Access ATA HDS722516VLSA80 V34O PQ: 0 ANSI: 5
Nov 12 18:27:43 localhost kernel: sd 0:0:0:0: [sda] Write Protect is off
Nov 12 18:27:43 localhost kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 12 18:27:43 localhost kernel: sd 0:0:1:0: [sdb] 321670847 512-byte logical blocks: (164 GB/153 GiB)
Nov 12 18:27:43 localhost kernel: scsi 1:0:0:0: Direct-Access ATA Hitachi HDT72101 ST6O PQ: 0 ANSI: 5
Nov 12 18:27:43 localhost kernel: scsi 1:0:1:0: CD-ROM PLEXTOR DVDR PX-820SA 1.01 PQ: 0 ANSI: 5
Nov 12 18:27:43 localhost kernel: sd 1:0:0:0: [sdc] 1953523055 512-byte logical blocks: (1.00 TB/931 GiB)
Nov 12 18:27:43 localhost kernel: sd 1:0:0:0: [sdc] Write Protect is off
Nov 12 18:27:43 localhost kernel: sd 1:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 12 18:27:43 localhost kernel: scsi 2:0:0:0: Direct-Access ATA WDC WD6400AAKS-2 01.0 PQ: 0 ANSI: 5
Nov 12 18:27:43 localhost kernel: sd 2:0:0:0: [sdd] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
Nov 12 18:27:43 localhost kernel: sd 2:0:0:0: [sdd] Write Protect is off
Nov 12 18:27:43 localhost kernel: sd 2:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 12 18:27:43 localhost kernel: sda: sda1 sda2
Nov 12 18:27:43 localhost kernel: sd 0:0:1:0: [sdb] Write Protect is off
Nov 12 18:27:43 localhost kernel: sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 12 18:27:43 localhost kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Nov 12 18:27:43 localhost kernel: sdc: sdc1
Nov 12 18:27:43 localhost kernel: sd 1:0:0:0: [sdc] Attached SCSI disk
Nov 12 18:27:43 localhost kernel: sdd: sdd1 sdd2 < sdd5 sdd6 >
Nov 12 18:27:43 localhost kernel: sd 2:0:0:0: [sdd] Attached SCSI disk
Nov 12 18:27:43 localhost kernel: sdb: sdb1 sdb2 < sdb5 sdb6 >
Nov 12 18:27:43 localhost kernel: sd 0:0:1:0: [sdb] Attached SCSI disk
Nov 12 18:27:43 localhost kernel: ahci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
Nov 12 18:27:43 localhost kernel: ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
Nov 12 18:27:43 localhost kernel: ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part
Nov 12 18:27:43 localhost kernel: scsi4 : ahci
Nov 12 18:27:43 localhost kernel: scsi5 : ahci
Nov 12 18:27:43 localhost kernel: ata5: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe100 irq 18
Nov 12 18:27:43 localhost kernel: ata6: SATA max UDMA/133 abar m8192@0xf7efe000 port 0xf7efe180 irq 18
Nov 12 18:27:43 localhost kernel: ata5: SATA link down (SStatus 0 SControl 300)
Nov 12 18:27:43 localhost kernel: ata6: SATA link down (SStatus 0 SControl 300)
Nov 12 18:27:43 localhost kernel: pata_acpi 0000:03:00.1: enabling device (0000 -> 0001)
Nov 12 18:27:43 localhost kernel: pata_acpi 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Nov 12 18:27:43 localhost kernel: pata_acpi 0000:03:00.1: PCI INT B disabled
Nov 12 18:27:43 localhost kernel: Uniform Multi-Platform E-IDE driver
Nov 12 18:27:43 localhost kernel: ide-gd driver 1.18
Nov 12 18:27:43 localhost kernel: pata_jmicron 0000:03:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
Nov 12 18:27:43 localhost kernel: scsi6 : pata_jmicron
Nov 12 18:27:43 localhost kernel: scsi7 : pata_jmicron
Nov 12 18:27:43 localhost kernel: ata7: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 19
Nov 12 18:27:43 localhost kernel: ata8: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 19
Nov 12 18:27:43 localhost kernel: usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0151
Nov 12 18:27:43 localhost kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 12 18:27:43 localhost kernel: usb 1-1.2: Product: USB2.0-CRW
Nov 12 18:27:43 localhost kernel: usb 1-1.2: Manufacturer: Generic
Nov 12 18:27:43 localhost kernel: usb 1-1.2: SerialNumber: 20060413092100000
Nov 12 18:27:43 localhost kernel: usb 2-1.6: new full speed USB device using ehci_hcd and address 3
Nov 12 18:27:43 localhost kernel: usb 2-1.6: New USB device found, idVendor=046d, idProduct=c068
Nov 12 18:27:43 localhost kernel: usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 12 18:27:43 localhost kernel: usb 2-1.6: Product: G500
Nov 12 18:27:43 localhost kernel: usb 2-1.6: Manufacturer: Logitech
Nov 12 18:27:43 localhost kernel: usb 2-1.6: SerialNumber: BAC05033E40018
Nov 12 18:27:43 localhost kernel: input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input0
Nov 12 18:27:43 localhost kernel: generic-usb 0003:046D:C068.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech G500] on usb-0000:00:1d.0-1.6/input0
Nov 12 18:27:43 localhost kernel: input: Logitech G500 as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.1/input/input1
Nov 12 18:27:43 localhost kernel: generic-usb 0003:046D:C068.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech G500] on usb-0000:00:1d.0-1.6/input1
Nov 12 18:27:43 localhost kernel: usb 2-1.8: new low speed USB device using ehci_hcd and address 4
Nov 12 18:27:43 localhost kernel: usb 2-1.8: New USB device found, idVendor=046d, idProduct=c30e
Nov 12 18:27:43 localhost kernel: usb 2-1.8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 12 18:27:43 localhost kernel: usb 2-1.8: Product: HID compliant keyboard
Nov 12 18:27:43 localhost kernel: usb 2-1.8: Manufacturer: Logitech
Nov 12 18:27:43 localhost kernel: input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.0/input/input2
Nov 12 18:27:43 localhost kernel: generic-usb 0003:046D:C30E.0003: input,hidraw2: USB HID v1.10 Keyboard [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1.8/input0
Nov 12 18:27:43 localhost kernel: input: Logitech HID compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.8/2-1.8:1.1/input/input3
Nov 12 18:27:43 localhost kernel: generic-usb 0003:046D:C30E.0004: input,hidraw3: USB HID v1.10 Device [Logitech HID compliant keyboard] on usb-0000:00:1d.0-1.8/input1
Nov 12 18:27:43 localhost kernel: EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: acl
Nov 12 18:27:43 localhost kernel: Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
Nov 12 18:27:43 localhost kernel: CE: hpet3 increased min_delta_ns to 7500 nsec
Nov 12 18:27:43 localhost kernel: CE: hpet3 increased min_delta_ns to 11250 nsec
Nov 12 18:27:43 localhost kernel: udev[149]: starting version 166
Nov 12 18:27:43 localhost kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Nov 12 18:27:43 localhost kernel: sd 0:0:1:0: Attached scsi generic sg1 type 0
Nov 12 18:27:43 localhost kernel: sd 1:0:0:0: Attached scsi generic sg2 type 0
Nov 12 18:27:43 localhost kernel: scsi 1:0:1:0: Attached scsi generic sg3 type 5
Nov 12 18:27:43 localhost kernel: sd 2:0:0:0: Attached scsi generic sg4 type 0
Nov 12 18:27:43 localhost kernel: sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
Nov 12 18:27:43 localhost kernel: cdrom: Uniform CD-ROM driver Revision: 3.20
Nov 12 18:27:43 localhost kernel: input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
Nov 12 18:27:43 localhost kernel: ACPI: Power Button [PWRB]
Nov 12 18:27:43 localhost kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
Nov 12 18:27:43 localhost kernel: ACPI: Power Button [PWRF]
Nov 12 18:27:43 localhost kernel: ATK0110 ATK0110:00: EC enabled
Nov 12 18:27:43 localhost kernel: i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
Nov 12 18:27:43 localhost kernel: r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
Nov 12 18:27:43 localhost kernel: r8169 0000:02:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Nov 12 18:27:43 localhost kernel: r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc90000676000, 20:cf:30:1b:d8:6e, XID 083000c0 IRQ 45
Nov 12 18:27:43 localhost kernel: Linux video capture interface: v2.00
Nov 12 18:27:43 localhost kernel: iTCO_vendor_support: vendor-support=0
Nov 12 18:27:43 localhost kernel: saa7130/34: v4l2 driver version 0.2.16 loaded
Nov 12 18:27:43 localhost kernel: saa7134 0000:07:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Nov 12 18:27:43 localhost kernel: saa7133[0]: found at 0000:07:01.0, rev: 209, irq: 16, latency: 64, mmio: 0xf7fff800
Nov 12 18:27:43 localhost kernel: saa7133[0]: subsystem: 1461:f01d, board: Avermedia Super 007 [card=117,autodetected]
Nov 12 18:27:43 localhost kernel: saa7133[0]: board init: gpio is 40000
Nov 12 18:27:43 localhost kernel: IR NEC protocol handler initialized
Nov 12 18:27:43 localhost kernel: iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
Nov 12 18:27:43 localhost kernel: iTCO_wdt: Found a P55 TCO device (Version=2, TCOBASE=0x0860)
Nov 12 18:27:43 localhost kernel: iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
Nov 12 18:27:43 localhost kernel: Initializing USB Mass Storage driver...
Nov 12 18:27:43 localhost kernel: scsi8 : usb-storage 1-1.2:1.0
Nov 12 18:27:43 localhost kernel: usbcore: registered new interface driver usb-storage
Nov 12 18:27:43 localhost kernel: USB Mass Storage support registered.
Nov 12 18:27:43 localhost kernel: IR RC5(x) protocol handler initialized
Nov 12 18:27:43 localhost kernel: IR RC6 protocol handler initialized
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom 00: 61 14 1d f0 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom 10: ff ff ff ff ff 20 ff ff ff ff ff ff ff ff ff ff
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 43 88 ff 00 55 ff ff ff ff
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom 40: ff 21 00 c0 96 10 03 02 15 16 ff ff ff ff ff ff
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Nov 12 18:27:43 localhost kernel: saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Nov 12 18:27:43 localhost kernel: i2c-core: driver [tuner] using legacy suspend method
Nov 12 18:27:43 localhost kernel: i2c-core: driver [tuner] using legacy resume method
Nov 12 18:27:43 localhost kernel: usbcore: registered new interface driver uas
Nov 12 18:27:43 localhost kernel: IR JVC protocol handler initialized
Nov 12 18:27:43 localhost kernel: tuner 1-004b: chip found @ 0x96 (saa7133[0])
Nov 12 18:27:43 localhost kernel: IR Sony protocol handler initialized
Nov 12 18:27:43 localhost kernel: tda829x 1-004b: setting tuner address to 60
Nov 12 18:27:43 localhost kernel: lirc_dev: IR Remote Control driver registered, major 250
Nov 12 18:27:43 localhost kernel: tda829x 1-004b: type set to tda8290+75a
Nov 12 18:27:43 localhost kernel: IR LIRC bridge handler initialized
Nov 12 18:27:43 localhost kernel: HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
Nov 12 18:27:43 localhost kernel: autoconfig: line_outs=4 (0x24/0x25/0x26/0x27/0x0)
Nov 12 18:27:43 localhost kernel: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
Nov 12 18:27:43 localhost kernel: hp_outs=1 (0x28/0x0/0x0/0x0/0x0)
Nov 12 18:27:43 localhost kernel: mono: mono_out=0x0
Nov 12 18:27:43 localhost kernel: dig-out=0x2d/0x2e
Nov 12 18:27:43 localhost kernel: inputs:
Nov 12 18:27:43 localhost kernel: scsi 8:0:0:0: Direct-Access Generic- Compact Flash 1.00 PQ: 0 ANSI: 0 CCS
Nov 12 18:27:43 localhost kernel: sd 8:0:0:0: Attached scsi generic sg5 type 0
Nov 12 18:27:43 localhost kernel: scsi 8:0:0:1: Direct-Access Generic- SM/xD-Picture 1.00 PQ: 0 ANSI: 0 CCS
Nov 12 18:27:43 localhost kernel: sd 8:0:0:1: Attached scsi generic sg6 type 0
Nov 12 18:27:43 localhost kernel: scsi 8:0:0:2: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 CCS
Nov 12 18:27:43 localhost kernel: sd 8:0:0:2: Attached scsi generic sg7 type 0
Nov 12 18:27:43 localhost kernel: scsi 8:0:0:3: Direct-Access Generic- MS/MS-Pro 1.00 PQ: 0 ANSI: 0 CCS
Nov 12 18:27:43 localhost kernel: sd 8:0:0:3: Attached scsi generic sg8 type 0
Nov 12 18:27:43 localhost kernel: sd 8:0:0:0: [sde] Attached SCSI removable disk
Nov 12 18:27:43 localhost kernel: sd 8:0:0:1: [sdf] Attached SCSI removable disk
Nov 12 18:27:43 localhost kernel: sd 8:0:0:2: [sdg] Attached SCSI removable disk
Nov 12 18:27:43 localhost kernel: sd 8:0:0:3: [sdh] Attached SCSI removable disk
Nov 12 18:27:43 localhost kernel: hda-codec: no NID for mapping control Independent HP:0:0
Nov 12 18:27:43 localhost kernel: HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Nov 12 18:27:43 localhost kernel: CE: hpet4 increased min_delta_ns to 7500 nsec
Nov 12 18:27:43 localhost kernel: CE: hpet4 increased min_delta_ns to 11250 nsec
Nov 12 18:27:43 localhost kernel: saa7133[0]: dsp access error
Nov 12 18:27:43 localhost kernel: saa7133[0]: registered device video0 [v4l2]
Nov 12 18:27:43 localhost kernel: saa7133[0]: registered device vbi0
Nov 12 18:27:43 localhost kernel: firewire_ohci 0000:07:04.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
Nov 12 18:27:43 localhost kernel: dvb_init() allocating 1 frontend
Nov 12 18:27:43 localhost kernel: DVB: registering new adapter (saa7133[0])
Nov 12 18:27:43 localhost kernel: DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)...
Nov 12 18:27:43 localhost kernel: firewire_ohci: Added fw-ohci device 0000:07:04.0, OHCI v1.10, 4 IR + 8 IT contexts, quirks 0x11
Nov 12 18:27:43 localhost kernel: tda1004x: setting up plls for 48MHz sampling clock
Nov 12 18:27:43 localhost kernel: firewire_core: created device fw0: GUID 001e8c0000dbb635, S400
Nov 12 18:27:43 localhost kernel: device-mapper: uevent: version 1.0.3
Nov 12 18:27:43 localhost kernel: device-mapper: ioctl: 4.19.1-ioctl (2011-01-07) initialised: dm-devel@redhat.com
Nov 12 18:27:43 localhost kernel: EXT4-fs (sdd1): re-mounted. Opts: acl
Nov 12 18:27:43 localhost kernel: tda1004x: timeout waiting for DSP ready
Nov 12 18:27:43 localhost kernel: tda1004x: found firmware revision 0 -- invalid
Nov 12 18:27:43 localhost kernel: tda1004x: trying to boot from eeprom
Nov 12 18:27:43 localhost kernel: EXT4-fs (sdd6): mounted filesystem with ordered data mode. Opts: acl
Nov 12 18:27:43 localhost kernel: fuse init (API version 7.16)
Nov 12 18:27:43 localhost kernel: loop: module loaded
Nov 12 18:27:43 localhost kernel: Adding 4088504k swap on /dev/sdd5. Priority:-1 extents:1 across:4088504k
Nov 12 18:27:43 localhost kernel: tda1004x: timeout waiting for DSP ready
Nov 12 18:27:43 localhost kernel: tda1004x: found firmware revision 0 -- invalid
Nov 12 18:27:43 localhost kernel: tda1004x: waiting for firmware upload...
Nov 12 18:27:43 localhost kernel: tda1004x: no firmware upload (timeout or file not found?)
Nov 12 18:27:43 localhost kernel: tda1004x: firmware upload failed
Nov 12 18:27:43 localhost kernel: saa7134 ALSA driver for DMA sound loaded
Nov 12 18:27:43 localhost kernel: saa7133[0]/alsa: saa7133[0] at 0xf7fff800 irq 16 registered as card -1
Nov 12 18:27:43 localhost kernel: fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Nov 12 18:27:43 localhost kernel: Disabling lock debugging due to kernel taint
Nov 12 18:27:43 localhost kernel: [fglrx] Maximum main memory to use for locked dma buffers: 3799 MBytes.
Nov 12 18:27:43 localhost kernel: [fglrx] vendor: 1002 device: 9442 count: 1
Nov 12 18:27:43 localhost kernel: [fglrx] ioport: bar 4, base 0xb000, size: 0x100
Nov 12 18:27:43 localhost kernel: pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
Nov 12 18:27:43 localhost kernel: [fglrx] Kernel PAT support is enabled
Nov 12 18:27:43 localhost kernel: [fglrx] module loaded - fglrx 8.88.7 [Jul 28 2011] with 1 minors
Nov 12 18:27:43 localhost kernel: CE: hpet5 increased min_delta_ns to 7500 nsec
Nov 12 18:27:43 localhost kernel: CE: hpet5 increased min_delta_ns to 11250 nsec
Nov 12 18:27:43 localhost crond[8292]: (CRON) STARTUP (1.4.7)
Nov 12 18:27:43 localhost crond[8292]: (CRON) INFO (Syslog will be used instead of sendmail.): Aucun fichier ou dossier de ce type
Nov 12 18:27:43 localhost kernel: vboxdrv: fAsync=0 offMin=0x1d1 offMax=0x55a7
Nov 12 18:27:43 localhost kernel: vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Nov 12 18:27:43 localhost crond[8292]: (CRON) INFO (running with inotify support)
Nov 12 18:27:44 localhost polkitd[8453]: started daemon version 0.101 using authority implementation `local' version `0.101'
Nov 12 18:27:44 localhost kernel: NET: Registered protocol family 10
Nov 12 18:27:44 localhost acpid: client connected from 8629[495:495]
Nov 12 18:27:44 localhost acpid: 1 client rule loaded
Nov 12 18:27:44 localhost ifplugd(eth0)[8737]: ifplugd 0.28 initializing.
Nov 12 18:27:44 localhost kernel: r8169 0000:02:00.0: eth0: unable to apply firmware patch rtl_nic/rtl8168d-2.fw
Nov 12 18:27:44 localhost ifplugd(eth0)[8737]: Using interface eth0/20:CF:30:1B:D8:6E with driver <r8169> (version: 2.3LK-NAPI)
Nov 12 18:27:44 localhost ifplugd(eth0)[8737]: Using detection mode: SIOCETHTOOL
Nov 12 18:27:44 localhost ifplugd(eth0)[8737]: Initialization complete, link beat not detected.
Nov 12 18:27:44 localhost kernel: r8169 0000:02:00.0: eth0: link down
Nov 12 18:27:44 localhost kernel: r8169 0000:02:00.0: eth0: link down
Nov 12 18:27:44 localhost kernel: ADDRCONF(NETDEV_UP): eth0: link is not ready
Nov 12 18:27:45 localhost acpid: client connected from 8905[0:0]
Nov 12 18:27:45 localhost acpid: 1 client rule loaded
Nov 12 18:27:45 localhost kernel: [fglrx] Firegl kernel thread PID: 8909
Nov 12 18:27:45 localhost kernel: [fglrx] Firegl kernel thread PID: 8910
Nov 12 18:27:45 localhost kernel: [fglrx] Firegl kernel thread PID: 8911
Nov 12 18:27:45 localhost kernel: [fglrx] IRQ 48 Enabled
Nov 12 18:27:46 localhost kernel: r8169 0000:02:00.0: eth0: link up
Nov 12 18:27:46 localhost kernel: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Nov 12 18:27:46 localhost kernel: [fglrx] Gart USWC size:1240 M.
Nov 12 18:27:46 localhost kernel: [fglrx] Gart cacheable size:491 M.
Nov 12 18:27:46 localhost kernel: [fglrx] Reserved FB block: Shared offset:0, size:1000000
Nov 12 18:27:46 localhost kernel: [fglrx] Reserved FB block: Unshared offset:fc1f000, size:3e1000
Nov 12 18:27:46 localhost kernel: [fglrx] Reserved FB block: Unshared offset:1fffb000, size:5000
Nov 12 18:27:46 localhost ifplugd(eth0)[8737]: Link beat detected.
Nov 12 18:27:47 localhost ifplugd(eth0)[8737]: Executing '/etc/ifplugd/ifplugd.action eth0 up'.
Nov 12 18:27:48 localhost kernel: NET: Registered protocol family 17
Nov 12 18:27:48 localhost dhclient: DHCPREQUEST on eth0 to 255.255.255.255 port 67
Nov 12 18:27:48 localhost dhclient: DHCPACK from 192.168.0.254
Nov 12 18:27:48 localhost NET[9132]: /sbin/dhclient-script : updated /etc/resolv.conf
Nov 12 18:27:48 localhost ifplugd(eth0)[8737]: client: Determining IP information for eth0.../etc/sysconfig/network-scripts/network-functions: ligne419: /usr/sbin/nscd: Aucun fichier ou dossier de ce type
Nov 12 18:27:48 localhost dhclient: bound to 192.168.0.4 -- renewal in 425344 seconds.
Nov 12 18:27:48 localhost ifplugd(eth0)[8737]: client: done.
Nov 12 18:27:48 localhost ifplugd(eth0)[8737]: Program executed successfully.
Nov 12 18:27:49 localhost avahi-daemon[9306]: Found user 'avahi' (UID 498) and group 'avahi' (GID 498).
Nov 12 18:27:49 localhost avahi-daemon[9306]: Successfully dropped root privileges.
Nov 12 18:27:49 localhost avahi-daemon[9306]: avahi-daemon 0.6.30 starting up.
Nov 12 18:27:49 localhost avahi-daemon[9306]: Successfully called chroot().
Nov 12 18:27:49 localhost avahi-daemon[9306]: Successfully dropped remaining capabilities.
Nov 12 18:27:49 localhost avahi-daemon[9306]: Loading service file /services/sftp-ssh.service.
Nov 12 18:27:49 localhost avahi-daemon[9306]: Loading service file /services/udisks.service.
Nov 12 18:27:49 localhost avahi-daemon[9306]: System host name is set to 'localhost'. This is not a suitable mDNS host name, looking for alternatives.
Nov 12 18:27:49 localhost avahi-daemon[9306]: Joining mDNS multicast group on interface eth0.IPv4 with address 192.168.0.4.
Nov 12 18:27:49 localhost avahi-daemon[9306]: New relevant interface eth0.IPv4 for mDNS.
Nov 12 18:27:49 localhost avahi-daemon[9306]: Network interface enumeration completed.
Nov 12 18:27:49 localhost avahi-daemon[9306]: Registering new address record for fe80::22cf:30ff:fe1b:d86e on eth0.*.
Nov 12 18:27:49 localhost avahi-daemon[9306]: Registering new address record for 192.168.0.4 on eth0.IPv4.
Nov 12 18:27:49 localhost avahi-daemon[9306]: Registering HINFO record with values 'X86_64'/'LINUX'.
Nov 12 18:27:50 localhost kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 12 18:27:50 localhost avahi-daemon[9306]: Server startup complete. Host name is linux.local. Local service cookie is 2717774680.
Nov 12 18:27:51 localhost kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Nov 12 18:27:51 localhost kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Nov 12 18:27:51 localhost kernel: NF_TPROXY: Transparent proxy support initialized, version 4.1.0
Nov 12 18:27:51 localhost kernel: NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
Nov 12 18:27:51 localhost kernel: Netfilter messages via NETLINK v0.30.
Nov 12 18:27:51 localhost kernel: ip_set: protocol 6
Nov 12 18:27:51 localhost kernel: xt_time: kernel timezone is +0100
Nov 12 18:27:51 localhost avahi-daemon[9306]: Service "linux" (/services/udisks.service) successfully established.
Nov 12 18:27:51 localhost avahi-daemon[9306]: Service "linux" (/services/sftp-ssh.service) successfully established.
Nov 12 18:27:51 localhost kernel: IFWLOG: register target
Nov 12 18:27:51 localhost logger: Shorewall started
Nov 12 18:27:53 localhost rtkit-daemon[9757]: Successfully made thread 9755 of process 9755 (/usr/bin/pulseaudio) owned by '491' high priority at nice level -11.
Nov 12 18:27:54 localhost kernel: ata1.00: configured for UDMA/100
Nov 12 18:27:54 localhost kernel: ata1.01: configured for UDMA/100
Nov 12 18:27:54 localhost kernel: ata1: EH complete
Nov 12 18:27:54 localhost kernel: ata1.00: configured for UDMA/100
Nov 12 18:27:54 localhost kernel: ata1.01: configured for UDMA/100
Nov 12 18:27:54 localhost kernel: ata1: EH complete
Nov 12 18:27:54 localhost kernel: ata2.00: configured for UDMA/133
Nov 12 18:27:54 localhost kernel: ata2.01: configured for UDMA/100
Nov 12 18:27:54 localhost kernel: ata2: EH complete
Nov 12 18:27:54 localhost kernel: ata3.00: configured for UDMA/133
Nov 12 18:27:54 localhost kernel: ata3: EH complete
Nov 12 18:27:54 localhost kernel: EXT4-fs (sdd1): re-mounted. Opts: acl,commit=0
Nov 12 18:27:54 localhost kernel: EXT4-fs (sdd6): re-mounted. Opts: acl,commit=0
Nov 12 18:27:54 localhost rtkit-daemon[9757]: Successfully made thread 9856 of process 9755 (/usr/bin/pulseaudio) owned by '491' RT at priority 5.
Nov 12 18:27:55 localhost rtkit-daemon[9757]: Successfully made thread 9857 of process 9755 (/usr/bin/
paradise Membre non connecté
-
- Voir le profil du membre paradise
- Inscrit le : 08/06/2011
- Groupes :
Grâce à qt, l'accès aux Nokia est aisé, avec les autres c'est plus aléatoire ; de toute manière seul le transfert de stockage de masse est reconnu, puisqu'il faut que la distro reconnaisse la carte RAM du mobile comme un DD ou une clef USB comme tu le dis dans ton premier post.
Perso hélas je n'ai pas de soluce, ni même avec un Win en virtuel, et si personne n'en trouve, il ne reste plus qu'à investir dans un petit lecteur de carte.
Édité par paradise Le 14/11/2011 à 12h08
NESTO Membre non connecté
-
- Voir le profil du membre NESTO
- Inscrit le : 04/03/2010
- Groupes :
Voilà ce que j'ai fait pour que le téléphone soit accessible via Mageia sans passer par un redémarrage et un boot sur Windows (car je suis en dual boot avec windows et Mageia).
J'ai désinstaller le Virtualbox OSE que j'avais installé via les dépôts.
J'ai installer à la place la version Virtualbox binaries récupéré sur le site du logiciel .
Ensuite j'ai installer les extensions pack, toujours sur le site, puis j'ai activé les Additions invités dans VitualBox.
J'ai aussi ajouté mon utilisateur dans le groupe de virtualbox pour qu'il est accès aux périphérique USB.
En cherchant j'ai fait comme ça en root sur mon terminal :
usermod -aG vboxusers $USER
Ça marche, le téléphone est parfaitement détecté par le windows virtualisé et en plus on a accès à tout nos fichiers personnels !
Voilà.
paradise Membre non connecté
-
- Voir le profil du membre paradise
- Inscrit le : 08/06/2011
- Groupes :
Le principal est que tu aies trouvé la solution.
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie