Mise(s) à jour du noyau problématique(s)
avec carte ATI Radeon HD 4670
Système et matériels / Installation et configuration
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
Ca devient ennuyeux et j'ai la crainte des mises à jour désormais.
A la suite de chacune des 5 ou 6 dernières mises à jour de noyaux, l'affichage devient déficient : balayage de l'écran pendant quelques dizaines de secondes avec affichage d'erreurs, mais trop rapide pour que l'on puisse les lire. Stop, pour que l'on puisse constater qu'il y a des erreurs inscrites, redémarrage d'un nouveau balayage avec d'autres erreurs, à nouveau pendant plusieurs dizaines de secondes ... stop éclair, rebalayage indiquant la déconnexion de pilotes etc... puis enfin démarrage. Tout paraît normal, mais l'affichage est en erreur et aucun "effet pas disponibles sur ce système pour les raisons techniques suivantes : [rien d'indiqué). Parfois, et aussi souvent, c'est un écran "noir", qui oblige de repasser par une ancien version ou par le disque.
Alors, à chaque mise à jour, intervention sur les paramètres de la carte pour aboutir un semblant d'équilibre, mais sans revenir jamais aux conditions de la Mandriva 2009, qui permettait l'accès à toutes les modalités de réglages offertes par le matériel.
Mon équipement : Antec Sonata III avec CM Gigabyte EP45-DS3, Intel Core 2 Duo E8400 et Twin Corsair XMS 2x2048 M° + 2x1024 M°, CG MSI Radeon HD 4670, Moniteur Samsung T220, DD Maxtor 500 G° + Hitachi 1 T°
Mageia 64 bits
Manipulations correctrices:
- CCM Configurer le serveur graphique, carte, utiliser le pilote spécifique : oui ...
Matériel, configuration de la carte (idem ci-dessus)
- Téléchargement ati-driver_installer-x-x... déplacer dans p.e. /opt/local/ATI puis cd /opt...
chmdod +x ati-driver-installer...
./ati-driver-installer...
- idem ci-dessus mais avec ./ati-driver... buildpkg Mageia/1
urpmi *fglrx*.rpm
- Installer le pilote comme un paquet perso et le déclarer dans les medias
plus tous les mix ainsi que des essais de recompil ...
Mais à chaque fois, je dois réintervenir manuellement pour réinstaller ma carte graphique.
Et parfois (et aussi souvent puisque c'est la CG qui pilote), c'est le son qui lâche.
Bref, aucune mise-à-jour qui se passe sans intervention.
N'y-a-t'il pas moyen de faire perdurer ce type de réglage automatiquement, ou de le provoquer, même manuellement afin d'éviter l'écran noir : juste après une MAJ de noyau, de version, ouvrir une fenêtre de réactivation des paramètres p.e.?
Gagner des parts pour Linux et pour Mageia, c'est super, mais encore faut-il les garder.
Mageia est le seul à offrir cette facilité d'installation et d'évolution. Mais pour des machines types apparemment (ce serait d'ailleurs bien de préciser la ou les config lype, ou les ingrédients à éviter (comme ATI ?). Les autres n'ont qu'à rester chez Win ?
Merci de votre écoute
Édité par dantou Le 13/10/2011 à 11h09
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
Un petit up svp.
Car cette fois, c'est le portable qui ne reconnaît plus la carte wifi, suite au passage au nouveau noyau. Pourtant, il me semblait que dkms permettait de se réimplanter automatiquement.
J'ai essayé de le relancer, mais comment faut-il pratiquer ?
J'ai essayé d'enlever le " rpm", mais comme je n'ai plus de connexion wifi, impossible de le recharger !
Enfin, une fois de plus, le nouveau noyau s'installe sans qu'on le sache - puisque j'ai essayé une MAJ sur un module qui fonctionnait sur l’antépénultième noyau. Et il faut réintervenir manuellement, les mains dans le camboui.
Quelles sont vos réflexions ?
Merci
PaLmAs Membre non connecté
-
- Voir le profil du membre PaLmAs
- Inscrit le : 02/04/2007
- Groupes :
alors avant toutes choses, les erreurs (trop rapide pour les voir) se trouvent dans /var/log. y a plusieurs fichiers de log, mais toutes les erreurs se trouvent dedans. ça peut aider pour comprendre le problème.
Comment installe tu les drivers pour ta carte ati ?
par le paquet dans les dépôts ? par toi même en compilant ?
Pour le portable, qu'elle est la carte wifi ?
Citation :
Pourtant, il me semblait que dkms permettait de se réimplanter automatiquement.
Oui mais il te faut aussi le devel du kernel (celui ci se met il à jour aussi? )
en gros :
pour qu'une mise à jour de noyau sa passe bien il faut:
les dkms pour la carte graphique ou le driver wifi
le devel du nouveau noyau !
et lors du redémarrage le pc prendra plus de temps car il ré-compilera le driver pour que celui ci fonctionne.
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
Donc,
1) la dernière fois, j'ai installé le driver tout simplement par le dépôt, puisque désormais il existe. Mais le nouveau noyau ne le considère apparemment pas, ou l'écrase avec un autre ou ... je ne sais pas ce qu'il fait. Alors, j'ai lu quelque part qu'il fallait le mettre en blackliste pour qu'il ne soit pas touché. Quid ?
2) la carte est une realtek 8192SEvB. Elle fonctionne bien avec le noyau 6.7. Le dépôt est le rtl8192se-firmware. C'est comme ça que je passe.
3) Si j'installe le devel du nouveau noyau (par le CCM je suppose), se chargera-t-il ensuite tout seul ? Et, lorsque tu dis que le système re-compilera au démarrage, c'est à tous ou seulement à chaque changement du noyau ? Et ça prend combien de temps ?
Merci beaucoup
PaLmAs Membre non connecté
-
- Voir le profil du membre PaLmAs
- Inscrit le : 02/04/2007
- Groupes :
Citation :
3) Si j'installe le devel du nouveau noyau (par le CCM je suppose), se chargera-t-il ensuite tout seul ? Et, lorsque tu dis que le système re-compilera au démarrage, c'est à tous ou seulement à chaque changement du noyau ? Et ça prend combien de temps ?
oui ça recompilera tous seul, et non juste lors de l'installe d'un nouveau noyau, pour que tous ce mette à jour tous seul il faut aussi le kernel-devel-latest correspondant à ton version.
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
Alors j'ai actuellement le kernel-desktop-2.6.38-8-6.mga ainsi que kernel-desktop-devel-2.6.38-6.mga, kernel-desktop-latest et kernel-desktop-devel-latest.
J'ai actuellement recours à (toujours présent) kernel-desktop-2.6.38-7-1.mga ainsi que kernel-desktop-devel-2.6.38-7-1.mga, kernel-desktop-latest et kernel-desktop-devel-latest avec DKMS, DKMS-minimal, DKMS-fglrx et DKMS-r8192se et qui fonctionne.tout à fait correctement.
Si je te suis bien, en passant du noyau 38-7-1 au noyau 38-8-6, le "devel" aurait dû recompiler le DKMS-r8192se qui pilote la carte wifi ?
Y-a-t'il une activation à faire ?
Merci
PaLmAs Membre non connecté
-
- Voir le profil du membre PaLmAs
- Inscrit le : 02/04/2007
- Groupes :
Citation :
Si je te suis bien, en passant du noyau 38-7-1 au noyau 38-8-6, le "devel" aurait dû recompiler le DKMS-r8192se qui pilote la carte wifi ?
oui c bien ça si le devel du nouveau noyau est bien installé, pour ça logiquement c le rpm latest qui s'en charge pour que tous soit automatique (ça n'empêche pas un bug sur le nouveau noyau). Idem pour la carte graphique.
Mais je voudrai éliminer cette possibilité avant d'aller t’envoyai trifouiller en console.
faudrait connaitre le module de ta carte wifi, pour lancer lui ci à la main pour voir si il retourne une erreur.
un truc du style modprobe rtse8192 (je vais regarder si je trouve)
Que disent tes fichiers log dans /var/log ?
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
Citation :
Que disent tes fichiers log dans /var/log ?
Voici /var/log/
Caché :
[ 19.267]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 19.274] X Protocol Version 11, Revision 0
[ 19.274] Build Operating System: Linux_2.6.33.7-server-2.2mnb Mageia
[ 19.274] Current Operating System: Linux Antec 2.6.38.8-desktop-6.mga #1 SMP Mon Sep 26 20:27:50 UTC 2011 x86_64
[ 19.274] Kernel command line: BOOT_IMAGE=linux root=UUID=1c288750-03a8-41bc-81b2-fcd10370581b nokmsboot resume=UUID=2b239be7-d4b4-4e97-968d-6661a0f207e1 splash=silent vga=788
[ 19.274] Build Date: 17 April 2011 09:49:19PM
[ 19.274]
[ 19.274] Current version of pixman: 0.20.2
[ 19.274] Before reporting problems, check http://bugs.mageia.org
to make sure that you have the latest version.
[ 19.274] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.274] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 6 09:17:12 2011
[ 19.274] (==) Using config file: "/etc/X11/xorg.conf"
[ 19.274] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.274] (==) ServerLayout "layout1"
[ 19.274] (**) |-->Screen "screen1" (0)
[ 19.274] (**) | |-->Monitor "monitor1"
[ 19.274] (**) | |-->Device "device1"
[ 19.274] (**) Option "DontZap" "False"
[ 19.274] (**) Option "AllowMouseOpenFail"
[ 19.274] (==) Automatically adding devices
[ 19.274] (==) Automatically enabling devices
[ 19.274] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d
[ 19.274] (==) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules"
[ 19.274] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.274] (II) Loader magic: 0x7da200
[ 19.274] (II) Module ABI versions:
[ 19.274] X.Org ANSI C Emulation: 0.4
[ 19.274] X.Org Video Driver: 10.0
[ 19.274] X.Org XInput driver : 12.2
[ 19.274] X.Org Server Extension : 5.0
[ 19.275] (--) PCI:*(0:1:0:0) 1002:9490:174b:e100 rev 0, Mem @ 0xd0000000/268435456, 0xe5000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
[ 19.275] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19.275] (II) "extmod" will be loaded by default.
[ 19.275] (II) "dbe" will be loaded by default.
[ 19.275] (II) "glx" will be loaded by default.
[ 19.275] (II) "record" will be loaded by default.
[ 19.275] (II) "dri" will be loaded by default.
[ 19.275] (II) "dri2" will be loaded by default.
[ 19.275] (II) LoadModule: "v4l"
[ 19.316] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[ 19.316] (II) Module v4l: vendor="X.Org Foundation"
[ 19.316] compiled for 1.10.0, module version = 0.1.1
[ 19.316] ABI class: X.Org Video Driver, version 10.0
[ 19.316] (II) LoadModule: "extmod"
[ 19.316] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 19.316] (II) Module extmod: vendor="X.Org Foundation"
[ 19.316] compiled for 1.10.1, module version = 1.0.0
[ 19.316] Module class: X.Org Server Extension
[ 19.316] ABI class: X.Org Server Extension, version 5.0
[ 19.316] (II) Loading extension MIT-SCREEN-SAVER
[ 19.316] (II) Loading extension XFree86-VidModeExtension
[ 19.316] (II) Loading extension XFree86-DGA
[ 19.316] (II) Loading extension DPMS
[ 19.316] (II) Loading extension XVideo
[ 19.316] (II) Loading extension XVideo-MotionCompensation
[ 19.316] (II) Loading extension X-Resource
[ 19.316] (II) LoadModule: "dbe"
[ 19.317] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 19.317] (II) Module dbe: vendor="X.Org Foundation"
[ 19.317] compiled for 1.10.1, module version = 1.0.0
[ 19.317] Module class: X.Org Server Extension
[ 19.317] ABI class: X.Org Server Extension, version 5.0
[ 19.317] (II) Loading extension DOUBLE-BUFFER
[ 19.317] (II) LoadModule: "glx"
[ 19.317] (II) Loading /usr/lib64/xorg/extra-modules/libglx.so
[ 19.344] (II) Module glx: vendor="FireGL - AMD Technologies Inc."
[ 19.344] compiled for 6.9.0, module version = 1.0.0
[ 19.344] (II) Loading extension GLX
[ 19.344] (II) LoadModule: "record"
[ 19.345] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 19.345] (II) Module record: vendor="X.Org Foundation"
[ 19.345] compiled for 1.10.1, module version = 1.13.0
[ 19.345] Module class: X.Org Server Extension
[ 19.345] ABI class: X.Org Server Extension, version 5.0
[ 19.345] (II) Loading extension RECORD
[ 19.345] (II) LoadModule: "dri"
[ 19.345] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 19.345] (II) Module dri: vendor="X.Org Foundation"
[ 19.345] compiled for 1.10.1, module version = 1.0.0
[ 19.345] ABI class: X.Org Server Extension, version 5.0
[ 19.345] (II) Loading extension XFree86-DRI
[ 19.345] (II) LoadModule: "dri2"
[ 19.345] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 19.345] (II) Module dri2: vendor="X.Org Foundation"
[ 19.345] compiled for 1.10.1, module version = 1.2.0
[ 19.345] ABI class: X.Org Server Extension, version 5.0
[ 19.345] (II) Loading extension DRI2
[ 19.345] (II) LoadModule: "fglrx"
[ 19.346] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 19.500] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 19.512] compiled for 1.4.99.906, module version = 8.88.7
[ 19.512] Module class: X.Org Video Driver
[ 19.513] (II) Loading sub module "fglrxdrm"
[ 19.513] (II) LoadModule: "fglrxdrm"
[ 19.514] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 19.520] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 19.520] compiled for 1.4.99.906, module version = 8.88.7
[ 19.520] (II) v4l driver for Video4Linux
[ 19.520] (II) ATI Proprietary Linux Driver Version Identifier:8.88.7
[ 19.520] (II) ATI Proprietary Linux Driver Release Identifier: 8.881
[ 19.520] (II) ATI Proprietary Linux Driver Build Date: Jul 28 2011 17:04:01
[ 19.520] (++) using VT number 8
[ 19.526] (WW) Falling back to old probe method for v4l
[ 19.526] (WW) Falling back to old probe method for fglrx
[ 19.553] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 19.562] (--) Assigning device section with no busID to primary device
[ 19.562] (--) Chipset Supported AMD Graphics Processor (0x9490) found
[ 19.564] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 19.564] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 19.564] (II) AMD Video driver is signed
[ 19.564] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 19.564] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 19.564] (II) fglrx(0): pEnt->device->identifier=0x133d0f0
[ 19.564] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 19.564] (II) Loading sub module "vgahw"
[ 19.564] (II) LoadModule: "vgahw"
[ 19.565] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[ 19.565] (II) Module vgahw: vendor="X.Org Foundation"
[ 19.565] compiled for 1.10.1, module version = 0.1.0
[ 19.565] ABI class: X.Org Video Driver, version 10.0
[ 19.565] (II) fglrx(0): Creating default Display subsection in Screen section
"screen1" for depth/fbbpp 24/32
[ 19.565] (==) fglrx(0): Depth 24, (==) framebuffer bpp 32
[ 19.565] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 19.565] (==) fglrx(0): Default visual is TrueColor
[ 19.565] (**) fglrx(0): Option "DPMS"
[ 19.565] (==) fglrx(0): RGB weight 888
[ 19.565] (II) fglrx(0): Using 8 bits per RGB
[ 19.565] (==) fglrx(0): Buffer Tiling is ON
[ 19.566] (II) Loading sub module "fglrxdrm"
[ 19.566] (II) LoadModule: "fglrxdrm"
[ 19.566] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 19.566] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 19.566] compiled for 1.4.99.906, module version = 8.88.7
[ 19.568] ukiDynamicMajor: found major device number 251
[ 19.568] ukiDynamicMajor: found major device number 251
[ 19.568] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 19.568] ukiOpenDevice: node name is /dev/ati/card0
[ 19.568] ukiOpenDevice: open result is 11, (OK)
[ 19.568] ukiOpenByBusid: ukiOpenMinor returns 11
[ 19.568] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 19.568] (==) fglrx(0): NoAccel = NO
[ 19.568] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 19.568] (--) fglrx(0): Chipset: "ATI Radeon HD 4600 Series" (Chipset = 0x9490)
[ 19.568] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe100)
[ 19.568] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 19.568] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 19.568] (--) fglrx(0): MMIO registers at 0xe5000000
[ 19.568] (--) fglrx(0): I/O port at 0x0000a000
[ 19.568] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 19.570] (II) fglrx(0): AC Adapter is used
[ 19.578] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 19.578] (II) Loading sub module "vbe"
[ 19.578] (II) LoadModule: "vbe"
[ 19.579] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 19.579] (II) Module vbe: vendor="X.Org Foundation"
[ 19.579] compiled for 1.10.1, module version = 1.1.0
[ 19.579] ABI class: X.Org Video Driver, version 10.0
[ 19.580] (II) fglrx(0): VESA BIOS detected
[ 19.580] (II) fglrx(0): VESA VBE Version 3.0
[ 19.580] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 19.580] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 19.580] (II) fglrx(0): VESA VBE OEM Software Rev: 11.15
[ 19.580] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 19.580] (II) fglrx(0): VESA VBE OEM Product: 016
[ 19.580] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 19.613] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 19.613] (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3
[ 19.613] (II) fglrx(0): PCIE card detected
[ 19.613] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 19.613] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 19.616] (II) fglrx(0): Using adapter: 1:0.0.
[ 19.647] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 19.662] (II) fglrx(0): Interrupt handler installed at IRQ 49.
[ 19.662] (II) fglrx(0): RandR 1.2 support is enabled!
[ 19.662] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 19.662] (==) fglrx(0): Center Mode is disabled
[ 19.662] (II) Loading sub module "fb"
[ 19.662] (II) LoadModule: "fb"
[ 19.663] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 19.663] (II) Module fb: vendor="X.Org Foundation"
[ 19.663] compiled for 1.10.1, module version = 1.0.0
[ 19.663] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.663] (II) Loading sub module "ddc"
[ 19.663] (II) LoadModule: "ddc"
[ 19.663] (II) Module "ddc" already built-in
[ 20.079] (II) fglrx(0): Finished Initialize PPLIB!
[ 20.084] (II) fglrx(0): Output DFP1 using monitor section monitor1
[ 20.084] (II) fglrx(0): Output DFP2 has no monitor section
[ 20.084] (II) fglrx(0): Output CRT1 has no monitor section
[ 20.084] (II) fglrx(0): Output CRT2 has no monitor section
[ 20.084] (II) Loading sub module "ddc"
[ 20.084] (II) LoadModule: "ddc"
[ 20.084] (II) Module "ddc" already built-in
[ 20.084] (II) fglrx(0): Connected Display0: DFP1
[ 20.084] (II) fglrx(0): Display0 EDID data ---------------------------
[ 20.084] (II) fglrx(0): Manufacturer: SAM Model: 3e5 Serial#: 1415000626
[ 20.084] (II) fglrx(0): Year: 2008 Week: 38
[ 20.084] (II) fglrx(0): EDID Version: 1.3
[ 20.084] (II) fglrx(0): Digital Display Input
[ 20.084] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 20.084] (II) fglrx(0): Gamma: 2.20
[ 20.084] (II) fglrx(0): DPMS capabilities: Off
[ 20.084] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 20.084] (II) fglrx(0): First detailed timing is preferred mode
[ 20.084] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 20.084] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 20.084] (II) fglrx(0): Supported established timings:
[ 20.084] (II) fglrx(0): 720x400@70Hz
[ 20.084] (II) fglrx(0): 640x480@60Hz
[ 20.084] (II) fglrx(0): 640x480@67Hz
[ 20.084] (II) fglrx(0): 640x480@72Hz
[ 20.084] (II) fglrx(0): 640x480@75Hz
[ 20.084] (II) fglrx(0): 800x600@56Hz
[ 20.084] (II) fglrx(0): 800x600@60Hz
[ 20.084] (II) fglrx(0): 800x600@72Hz
[ 20.084] (II) fglrx(0): 800x600@75Hz
[ 20.084] (II) fglrx(0): 832x624@75Hz
[ 20.084] (II) fglrx(0): 1024x768@60Hz
[ 20.084] (II) fglrx(0): 1024x768@70Hz
[ 20.084] (II) fglrx(0): 1024x768@75Hz
[ 20.084] (II) fglrx(0): 1280x1024@75Hz
[ 20.084] (II) fglrx(0): 1152x864@75Hz
[ 20.084] (II) fglrx(0): Manufacturer's mask: 0
[ 20.084] (II) fglrx(0): Supported standard timings:
[ 20.084] (II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 20.084] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 20.084] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 20.084] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 20.084] (II) fglrx(0): Supported detailed timing:
[ 20.084] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 296 mm
[ 20.084] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 20.084] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 20.084] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 20.084] (II) fglrx(0): Monitor name: SyncMaster
[ 20.084] (II) fglrx(0): Serial No: H9XQ920527
[ 20.084] (II) fglrx(0): EDID (in hex):
[ 20.084] (II) fglrx(0): 00ffffffffffff004c2de50332325754
[ 20.084] (II) fglrx(0): 26120103802f1e782aee91a3544c9926
[ 20.084] (II) fglrx(0): 0f5054bfef80b30081808140714f0101
[ 20.084] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
[ 20.084] (II) fglrx(0): 3600da281100001a000000fd00384b1e
[ 20.084] (II) fglrx(0): 510e000a202020202020000000fc0053
[ 20.084] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 20.084] (II) fglrx(0): 00483958513932303532370a20200025
[ 20.084] (II) fglrx(0): End of Display0 EDID data --------------------
[ 20.151] (II) fglrx(0): EDID for output DFP1
[ 20.151] (II) fglrx(0): Manufacturer: SAM Model: 3e5 Serial#: 1415000626
[ 20.151] (II) fglrx(0): Year: 2008 Week: 38
[ 20.151] (II) fglrx(0): EDID Version: 1.3
[ 20.151] (II) fglrx(0): Digital Display Input
[ 20.151] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 20.151] (II) fglrx(0): Gamma: 2.20
[ 20.151] (II) fglrx(0): DPMS capabilities: Off
[ 20.151] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 20.151] (II) fglrx(0): First detailed timing is preferred mode
[ 20.151] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 20.151] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 20.151] (II) fglrx(0): Supported established timings:
[ 20.151] (II) fglrx(0): 720x400@70Hz
[ 20.151] (II) fglrx(0): 640x480@60Hz
[ 20.151] (II) fglrx(0): 640x480@67Hz
[ 20.151] (II) fglrx(0): 640x480@72Hz
[ 20.151] (II) fglrx(0): 640x480@75Hz
[ 20.151] (II) fglrx(0): 800x600@56Hz
[ 20.151] (II) fglrx(0): 800x600@60Hz
[ 20.151] (II) fglrx(0): 800x600@72Hz
[ 20.151] (II) fglrx(0): 800x600@75Hz
[ 20.151] (II) fglrx(0): 832x624@75Hz
[ 20.151] (II) fglrx(0): 1024x768@60Hz
[ 20.151] (II) fglrx(0): 1024x768@70Hz
[ 20.151] (II) fglrx(0): 1024x768@75Hz
[ 20.151] (II) fglrx(0): 1280x1024@75Hz
[ 20.151] (II) fglrx(0): 1152x864@75Hz
[ 20.151] (II) fglrx(0): Manufacturer's mask: 0
[ 20.151] (II) fglrx(0): Supported standard timings:
[ 20.151] (II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 20.151] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 20.151] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 20.151] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 20.151] (II) fglrx(0): Supported detailed timing:
[ 20.151] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 296 mm
[ 20.151] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 20.151] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 20.151] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 20.151] (II) fglrx(0): Monitor name: SyncMaster
[ 20.151] (II) fglrx(0): Serial No: H9XQ920527
[ 20.151] (II) fglrx(0): EDID (in hex):
[ 20.151] (II) fglrx(0): 00ffffffffffff004c2de50332325754
[ 20.151] (II) fglrx(0): 26120103802f1e782aee91a3544c9926
[ 20.151] (II) fglrx(0): 0f5054bfef80b30081808140714f0101
[ 20.151] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
[ 20.151] (II) fglrx(0): 3600da281100001a000000fd00384b1e
[ 20.151] (II) fglrx(0): 510e000a202020202020000000fc0053
[ 20.151] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 20.151] (II) fglrx(0): 00483958513932303532370a20200025
[ 20.151] (II) fglrx(0): EDID vendor "SAM", prod id 997
[ 20.151] (II) fglrx(0): Using hsync ranges from config file
[ 20.151] (II) fglrx(0): Using vrefresh ranges from config file
[ 20.151] (II) fglrx(0): Printing DDC gathered Modelines:
[ 20.151] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 20.151] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 20.151] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 20.151] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 20.151] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 20.151] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 20.151] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.151] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 20.151] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 20.151] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 20.151] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 20.151] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 20.151] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 20.151] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 20.151] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 20.151] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 20.151] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 20.151] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 20.152] (II) fglrx(0): Printing probed modes for output DFP1
[ 20.152] (II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync (64.7 kHz)
[ 20.152] (II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 +hsync -vsync (65.3 kHz)
[ 20.152] (II) fglrx(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 -hsync -vsync (60.0 kHz)
[ 20.152] (II) fglrx(0): Modeline "1360x1024"x60.0 116.01 1360 1448 1592 1824 1024 1025 1028 1060 +hsync -vsync (63.6 kHz)
[ 20.152] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 +hsync -vsync (55.9 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 +hsync -vsync (49.7 kHz)
[ 20.152] (II) fglrx(0): Modeline "1152x648"x60.0 59.90 1152 1200 1320 1488 648 649 652 671 +hsync -vsync (40.3 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 +hsync -vsync (75.2 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 -hsync -vsync (60.0 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x800"x75.0 107.21 1280 1360 1496 1712 800 801 804 835 +hsync -vsync (62.6 kHz)
[ 20.152] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 -hsync -vsync (67.5 kHz)
[ 20.152] (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync -vsync (53.7 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x768"x75.0 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync -vsync (47.8 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz)
[ 20.152] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 -hsync -vsync (60.0 kHz)
[ 20.152] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
[ 20.152] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
[ 20.152] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 -hsync -vsync (48.1 kHz)
[ 20.152] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 -hsync -vsync (46.9 kHz)
[ 20.152] (II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync -vsync (43.8 kHz)
[ 20.152] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 -hsync -vsync (37.9 kHz)
[ 20.152] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 -hsync -vsync (35.2 kHz)
[ 20.152] (II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync -vsync (29.8 kHz)
[ 20.152] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
[ 20.152] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 +hsync +vsync (37.9 kHz)
[ 20.152] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 648 744 800 480 482 484 525 +hsync +vsync (31.5 kHz)
[ 20.152] (II) fglrx(0): EDID for output DFP2
[ 20.152] (II) fglrx(0): EDID for output CRT1
[ 20.152] (II) fglrx(0): EDID for output CRT2
[ 20.152] (II) fglrx(0): Output DFP1 connected
[ 20.152] (II) fglrx(0): Output DFP2 disconnected
[ 20.152] (II) fglrx(0): Output CRT1 disconnected
[ 20.152] (II) fglrx(0): Output CRT2 disconnected
[ 20.152] (II) fglrx(0): Using exact sizes for initial modes
[ 20.152] (II) fglrx(0): Output DFP1 using initial mode 1680x1050
[ 20.152] (II) fglrx(0): Display dimensions: (470, 300) mm
[ 20.152] (II) fglrx(0): DPI set to (90, 88)
[ 20.152] (II) fglrx(0): Adapter ATI Radeon HD 4600 Series has 2 configurable heads and 1 displays connected.
[ 20.153] (==) fglrx(0): PseudoColor visuals disabled
[ 20.153] (II) Loading sub module "ramdac"
[ 20.153] (II) LoadModule: "ramdac"
[ 20.153] (II) Module "ramdac" already built-in
[ 20.153] (==) fglrx(0): NoDRI = NO
[ 20.153] (==) fglrx(0): Capabilities: 0x00000000
[ 20.153] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 20.153] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 20.153] (==) fglrx(0): UseFastTLS=0
[ 20.153] (==) fglrx(0): BlockSignalsOnLock=1
[ 20.153] (--) Depth 24 pixmap format is 32 bpp
[ 20.154] (II) Loading extension ATIFGLRXDRI
[ 20.154] (II) fglrx(0): doing swlDriScreenInit
[ 20.154] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 20.154] ukiDynamicMajor: found major device number 251
[ 20.154] ukiDynamicMajor: found major device number 251
[ 20.154] ukiDynamicMajor: found major device number 251
[ 20.154] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 20.154] ukiOpenDevice: node name is /dev/ati/card0
[ 20.154] ukiOpenDevice: open result is 16, (OK)
[ 20.154] ukiOpenByBusid: ukiOpenMinor returns 16
[ 20.154] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 20.154] (II) fglrx(0): [uki] DRM interface version 1.0
[ 20.154] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 20.154] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 20.154] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f7bc0e24000
[ 20.154] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 20.154] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 20.154] (II) fglrx(0): swlDriScreenInit done
[ 20.155] (II) fglrx(0): Kernel Module Version Information:
[ 20.155] (II) fglrx(0): Name: fglrx
[ 20.155] (II) fglrx(0): Version: 8.88.7
[ 20.155] (II) fglrx(0): Date: Jul 28 2011
[ 20.155] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 20.155] (II) fglrx(0): Kernel Module version matches driver.
[ 20.155] (II) fglrx(0): Kernel Module Build Time Information:
[ 20.155] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.38.8-desktop-6.mga
[ 20.155] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 20.155] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 20.155] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 20.155] (II) fglrx(0): [uki] register handle = 0x00004000
[ 20.172] (II) fglrx(0): DRI initialization successfull
[ 20.172] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01008000
[ 20.173] (==) fglrx(0): Backing store disabled
[ 20.173] (II) Loading extension FGLRXEXTENSION
[ 20.173] (**) fglrx(0): DPMS enabled
[ 20.173] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 20.173] (**) fglrx(0): Textured Video is enabled.
[ 20.173] (II) LoadModule: "glesx"
[ 20.173] (II) Loading /usr/lib64/xorg/modules/glesx.so
[ 20.174] (II) Module glesx: vendor="X.Org Foundation"
[ 20.174] compiled for 1.4.99.906, module version = 1.0.0
[ 20.174] (II) Loading extension GLESX
[ 20.174] (II) fglrx(0): GLESX enableFlags = 528
[ 20.174] (II) fglrx(0): GLESX is enabled
[ 20.174] (II) LoadModule: "amdxmm"
[ 20.174] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[ 20.174] (II) Module amdxmm: vendor="X.Org Foundation"
[ 20.174] compiled for 1.4.99.906, module version = 2.0.0
[ 20.174] (II) Loading extension AMDXVOPL
[ 20.174] (II) Loading extension AMDXVBA
[ 20.174] [- XMM_GLX] [I ]glesxXvInit Configureable RGBOutputColorRange
[ 20.179] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 20.181] (II) fglrx(0): Enable composite support successfully
[ 20.181] (II) fglrx(0): X context handle = 0x1
[ 20.181] (II) fglrx(0): [DRI] installation complete
[ 20.181] (==) fglrx(0): Silken mouse enabled
[ 20.181] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 20.181] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 20.283] (--) RandR disabled
[ 20.283] (II) Initializing built-in extension Generic Event Extension
[ 20.283] (II) Initializing built-in extension SHAPE
[ 20.283] (II) Initializing built-in extension MIT-SHM
[ 20.283] (II) Initializing built-in extension XInputExtension
[ 20.283] (II) Initializing built-in extension XTEST
[ 20.283] (II) Initializing built-in extension BIG-REQUESTS
[ 20.283] (II) Initializing built-in extension SYNC
[ 20.283] (II) Initializing built-in extension XKEYBOARD
[ 20.283] (II) Initializing built-in extension XC-MISC
[ 20.283] (II) Initializing built-in extension SECURITY
[ 20.283] (II) Initializing built-in extension XINERAMA
[ 20.283] (II) Initializing built-in extension XFIXES
[ 20.283] (II) Initializing built-in extension XFree86-Bigfont
[ 20.283] (II) Initializing built-in extension RENDER
[ 20.283] (II) Initializing built-in extension RANDR
[ 20.283] (II) Initializing built-in extension COMPOSITE
[ 20.283] (II) Initializing built-in extension DAMAGE
[ 20.286] ukiDynamicMajor: found major device number 251
[ 20.286] ukiDynamicMajor: found major device number 251
[ 20.286] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 20.286] ukiOpenDevice: node name is /dev/ati/card0
[ 20.286] ukiOpenDevice: open result is 17, (OK)
[ 20.286] ukiOpenByBusid: ukiOpenMinor returns 17
[ 20.286] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 20.963] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 20.974] (II) fglrx(0): Enable the clock gating!
[ 20.974] (II) fglrx(0): Setting screen physical size to 444 x 277
[ 21.312] (II) XKB: generating xkmfile /usr/share/X11/xkb/compiled/server-8AA988DD479FAABEC4FC3CCCF4CC29B4948840B4.xkm
[ 21.338] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 21.338] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.338] (II) LoadModule: "evdev"
[ 21.338] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.338] (II) Module evdev: vendor="X.Org Foundation"
[ 21.338] compiled for 1.10.0, module version = 2.6.0
[ 21.338] Module class: X.Org XInput Driver
[ 21.338] ABI class: X.Org XInput driver, version 12.2
[ 21.338] (II) Using input driver 'evdev' for 'Power Button'
[ 21.338] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.338] (**) Power Button: always reports core events
[ 21.338] (**) Power Button: Device: "/dev/input/event4"
[ 21.342] (--) Power Button: Found keys
[ 21.342] (II) Power Button: Configuring as keyboard
[ 21.342] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 21.342] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 21.342] (**) Option "xkb_rules" "evdev"
[ 21.342] (**) Option "xkb_model" "pc105"
[ 21.342] (**) Option "xkb_layout" "fr"
[ 21.342] (**) Option "xkb_options" "compose:rwin"
[ 21.343] (II) XKB: generating xkmfile /usr/share/X11/xkb/compiled/server-99CF0FBC2513CEA0B0411022FC44C24CB59D8944.xkm
[ 21.365] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 21.365] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.365] (II) Using input driver 'evdev' for 'Power Button'
[ 21.365] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.366] (**) Power Button: always reports core events
[ 21.366] (**) Power Button: Device: "/dev/input/event3"
[ 21.369] (--) Power Button: Found keys
[ 21.369] (II) Power Button: Configuring as keyboard
[ 21.369] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 21.369] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 21.369] (**) Option "xkb_rules" "evdev"
[ 21.369] (**) Option "xkb_model" "pc105"
[ 21.369] (**) Option "xkb_layout" "fr"
[ 21.369] (**) Option "xkb_options" "compose:rwin"
[ 21.370] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Keyboard 3000 (/dev/input/event0)
[ 21.370] (**) Microsoft Microsoft® Digital Media Keyboard 3000: Applying InputClass "evdev keyboard catchall"
[ 21.370] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Digital Media Keyboard 3000'
[ 21.370] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.370] (**) Microsoft Microsoft® Digital Media Keyboard 3000: always reports core events
[ 21.370] (**) Microsoft Microsoft® Digital Media Keyboard 3000: Device: "/dev/input/event0"
[ 21.379] (--) Microsoft Microsoft® Digital Media Keyboard 3000: Found keys
[ 21.379] (II) Microsoft Microsoft® Digital Media Keyboard 3000: Configuring as keyboard
[ 21.379] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input0/event0"
[ 21.379] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Keyboard 3000" (type: KEYBOARD)
[ 21.379] (**) Option "xkb_rules" "evdev"
[ 21.379] (**) Option "xkb_model" "pc105"
[ 21.379] (**) Option "xkb_layout" "fr"
[ 21.379] (**) Option "xkb_options" "compose:rwin"
[ 21.379] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Keyboard 3000 (/dev/input/event1)
[ 21.379] (**) Microsoft Microsoft® Digital Media Keyboard 3000: Applying InputClass "evdev keyboard catchall"
[ 21.379] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Digital Media Keyboard 3000'
[ 21.379] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.379] (**) Microsoft Microsoft® Digital Media Keyboard 3000: always reports core events
[ 21.379] (**) Microsoft Microsoft® Digital Media Keyboard 3000: Device: "/dev/input/event1"
[ 21.382] (--) Microsoft Microsoft® Digital Media Keyboard 3000: Found 1 mouse buttons
[ 21.382] (--) Microsoft Microsoft® Digital Media Keyboard 3000: Found scroll wheel(s)
[ 21.382] (--) Microsoft Microsoft® Digital Media Keyboard 3000: Found relative axes
[ 21.382] (--) Microsoft Microsoft® Digital Media Keyboard 3000: Found absolute axes
[ 21.382] (--) Microsoft Microsoft® Digital Media Keyboard 3000: Found x and y absolute axes
[ 21.382] (--) Microsoft Microsoft® Digital Media Keyboard 3000: Found keys
[ 21.382] (II) Microsoft Microsoft® Digital Media Keyboard 3000: Configuring as mouse
[ 21.382] (II) Microsoft Microsoft® Digital Media Keyboard 3000: Configuring as keyboard
[ 21.382] (II) Microsoft Microsoft® Digital Media Keyboard 3000: Adding scrollwheel support
[ 21.382] (**) Microsoft Microsoft® Digital Media Keyboard 3000: YAxisMapping: buttons 4 and 5
[ 21.382] (**) Microsoft Microsoft® Digital Media Keyboard 3000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.382] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input1/event1"
[ 21.382] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Keyboard 3000" (type: KEYBOARD)
[ 21.382] (**) Option "xkb_rules" "evdev"
[ 21.382] (**) Option "xkb_model" "pc105"
[ 21.382] (**) Option "xkb_layout" "fr"
[ 21.382] (**) Option "xkb_options" "compose:rwin"
[ 21.382] (EE) Microsoft Microsoft® Digital Media Keyboard 3000: failed to initialize for relative axes.
[ 21.382] (WW) Microsoft Microsoft® Digital Media Keyboard 3000: found 37 axes, limiting to 36.
[ 21.382] (II) Microsoft Microsoft® Digital Media Keyboard 3000: initialized for absolute axes.
[ 21.382] (**) Microsoft Microsoft® Digital Media Keyboard 3000: (accel) keeping acceleration scheme 1
[ 21.382] (**) Microsoft Microsoft® Digital Media Keyboard 3000: (accel) acceleration profile 0
[ 21.382] (**) Microsoft Microsoft® Digital Media Keyboard 3000: (accel) acceleration factor: 2.000
[ 21.382] (**) Microsoft Microsoft® Digital Media Keyboard 3000: (accel) acceleration threshold: 4
[ 21.382] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Keyboard 3000 (/dev/input/js0)
[ 21.382] (II) No input driver/identifier specified (ignoring)
[ 21.386] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 21.386] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 21.386] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 21.386] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.386] (**) Logitech USB Receiver: always reports core events
[ 21.386] (**) Logitech USB Receiver: Device: "/dev/input/event2"
[ 21.389] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 21.389] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 21.389] (--) Logitech USB Receiver: Found relative axes
[ 21.389] (--) Logitech USB Receiver: Found x and y relative axes
[ 21.389] (II) Logitech USB Receiver: Configuring as mouse
[ 21.389] (II) Logitech USB Receiver: Adding scrollwheel support
[ 21.389] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 21.389] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.389] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input2/event2"
[ 21.389] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
[ 21.389] (II) Logitech USB Receiver: initialized for relative axes.
[ 21.389] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 21.389] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 21.389] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 21.389] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 21.389] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 21.389] (II) No input driver/identifier specified (ignoring)
[ 21.436] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 28.045] (II) XKB: generating xkmfile /usr/share/X11/xkb/compiled/server-4527A01B31A06E494170319A40035E42AF2B1989.xkm
[ 28.147] (II) XKB: generating xkmfile /usr/share/X11/xkb/compiled/server-E1F5A607D2AC4CF885D4406EABA22FB30AD247EB.xkm
[ 30.785] (II) fglrx(0): EDID vendor "SAM", prod id 997
[ 31.272] (II) fglrx(0): Using hsync ranges from config file
[ 31.272] (II) fglrx(0): Using vrefresh ranges from config file
[ 31.272] (II) fglrx(0): Printing DDC gathered Modelines:
[ 31.272] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 31.272] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 31.272] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 31.272] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 31.272] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 31.272] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 31.272] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 31.272] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 31.272] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 31.272] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 31.272] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 31.272] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 31.272] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 31.272] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 31.272] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 31.272] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 31.272] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 31.272] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 55.479] (II) fglrx(0): EDID vendor "SAM", prod id 997
[ 55.479] (II) fglrx(0): Using hsync ranges from config file
[ 55.479] (II) fglrx(0): Using vrefresh ranges from config file
[ 55.479] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.479] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 55.479] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 55.479] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 55.479] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 55.479] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 55.479] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 55.479] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 55.479] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 55.479] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 55.479] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 55.479] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 55.479] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 55.479] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 55.479] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 55.479] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 55.479] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 55.479] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 55.479] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 68.465] (II) XKB: generating xkmfile /usr/share/X11/xkb/compiled/server-E9C7160E4027E617E6745C2E4579CF6C0A2EF2C7.xkm
[ 131.123] (II) XKB: generating xkmfile /usr/share/X11/xkb/compiled/server-E9C7160E4027E617E6745C2E4579CF6C0A2EF2C7.xkm
[ 187.309] (II) XKB: generating xkmfile /usr/share/X11/xkb/compiled/server-E9C7160E4027E617E6745C2E4579CF6C0A2EF2C7.xkm
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 19.274] X Protocol Version 11, Revision 0
[ 19.274] Build Operating System: Linux_2.6.33.7-server-2.2mnb Mageia
[ 19.274] Current Operating System: Linux Antec 2.6.38.8-desktop-6.mga #1 SMP Mon Sep 26 20:27:50 UTC 2011 x86_64
[ 19.274] Kernel command line: BOOT_IMAGE=linux root=UUID=1c288750-03a8-41bc-81b2-fcd10370581b nokmsboot resume=UUID=2b239be7-d4b4-4e97-968d-6661a0f207e1 splash=silent vga=788
[ 19.274] Build Date: 17 April 2011 09:49:19PM
[ 19.274]
[ 19.274] Current version of pixman: 0.20.2
[ 19.274] Before reporting problems, check http://bugs.mageia.org
to make sure that you have the latest version.
[ 19.274] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 19.274] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Nov 6 09:17:12 2011
[ 19.274] (==) Using config file: "/etc/X11/xorg.conf"
[ 19.274] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 19.274] (==) ServerLayout "layout1"
[ 19.274] (**) |-->Screen "screen1" (0)
[ 19.274] (**) | |-->Monitor "monitor1"
[ 19.274] (**) | |-->Device "device1"
[ 19.274] (**) Option "DontZap" "False"
[ 19.274] (**) Option "AllowMouseOpenFail"
[ 19.274] (==) Automatically adding devices
[ 19.274] (==) Automatically enabling devices
[ 19.274] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d
[ 19.274] (==) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules"
[ 19.274] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 19.274] (II) Loader magic: 0x7da200
[ 19.274] (II) Module ABI versions:
[ 19.274] X.Org ANSI C Emulation: 0.4
[ 19.274] X.Org Video Driver: 10.0
[ 19.274] X.Org XInput driver : 12.2
[ 19.274] X.Org Server Extension : 5.0
[ 19.275] (--) PCI:*(0:1:0:0) 1002:9490:174b:e100 rev 0, Mem @ 0xd0000000/268435456, 0xe5000000/65536, I/O @ 0x0000a000/256, BIOS @ 0x????????/131072
[ 19.275] (II) Open ACPI successful (/var/run/acpid.socket)
[ 19.275] (II) "extmod" will be loaded by default.
[ 19.275] (II) "dbe" will be loaded by default.
[ 19.275] (II) "glx" will be loaded by default.
[ 19.275] (II) "record" will be loaded by default.
[ 19.275] (II) "dri" will be loaded by default.
[ 19.275] (II) "dri2" will be loaded by default.
[ 19.275] (II) LoadModule: "v4l"
[ 19.316] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[ 19.316] (II) Module v4l: vendor="X.Org Foundation"
[ 19.316] compiled for 1.10.0, module version = 0.1.1
[ 19.316] ABI class: X.Org Video Driver, version 10.0
[ 19.316] (II) LoadModule: "extmod"
[ 19.316] (II) Loading /usr/lib64/xorg/modules/extensions/libextmod.so
[ 19.316] (II) Module extmod: vendor="X.Org Foundation"
[ 19.316] compiled for 1.10.1, module version = 1.0.0
[ 19.316] Module class: X.Org Server Extension
[ 19.316] ABI class: X.Org Server Extension, version 5.0
[ 19.316] (II) Loading extension MIT-SCREEN-SAVER
[ 19.316] (II) Loading extension XFree86-VidModeExtension
[ 19.316] (II) Loading extension XFree86-DGA
[ 19.316] (II) Loading extension DPMS
[ 19.316] (II) Loading extension XVideo
[ 19.316] (II) Loading extension XVideo-MotionCompensation
[ 19.316] (II) Loading extension X-Resource
[ 19.316] (II) LoadModule: "dbe"
[ 19.317] (II) Loading /usr/lib64/xorg/modules/extensions/libdbe.so
[ 19.317] (II) Module dbe: vendor="X.Org Foundation"
[ 19.317] compiled for 1.10.1, module version = 1.0.0
[ 19.317] Module class: X.Org Server Extension
[ 19.317] ABI class: X.Org Server Extension, version 5.0
[ 19.317] (II) Loading extension DOUBLE-BUFFER
[ 19.317] (II) LoadModule: "glx"
[ 19.317] (II) Loading /usr/lib64/xorg/extra-modules/libglx.so
[ 19.344] (II) Module glx: vendor="FireGL - AMD Technologies Inc."
[ 19.344] compiled for 6.9.0, module version = 1.0.0
[ 19.344] (II) Loading extension GLX
[ 19.344] (II) LoadModule: "record"
[ 19.345] (II) Loading /usr/lib64/xorg/modules/extensions/librecord.so
[ 19.345] (II) Module record: vendor="X.Org Foundation"
[ 19.345] compiled for 1.10.1, module version = 1.13.0
[ 19.345] Module class: X.Org Server Extension
[ 19.345] ABI class: X.Org Server Extension, version 5.0
[ 19.345] (II) Loading extension RECORD
[ 19.345] (II) LoadModule: "dri"
[ 19.345] (II) Loading /usr/lib64/xorg/modules/extensions/libdri.so
[ 19.345] (II) Module dri: vendor="X.Org Foundation"
[ 19.345] compiled for 1.10.1, module version = 1.0.0
[ 19.345] ABI class: X.Org Server Extension, version 5.0
[ 19.345] (II) Loading extension XFree86-DRI
[ 19.345] (II) LoadModule: "dri2"
[ 19.345] (II) Loading /usr/lib64/xorg/modules/extensions/libdri2.so
[ 19.345] (II) Module dri2: vendor="X.Org Foundation"
[ 19.345] compiled for 1.10.1, module version = 1.2.0
[ 19.345] ABI class: X.Org Server Extension, version 5.0
[ 19.345] (II) Loading extension DRI2
[ 19.345] (II) LoadModule: "fglrx"
[ 19.346] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 19.500] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 19.512] compiled for 1.4.99.906, module version = 8.88.7
[ 19.512] Module class: X.Org Video Driver
[ 19.513] (II) Loading sub module "fglrxdrm"
[ 19.513] (II) LoadModule: "fglrxdrm"
[ 19.514] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 19.520] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 19.520] compiled for 1.4.99.906, module version = 8.88.7
[ 19.520] (II) v4l driver for Video4Linux
[ 19.520] (II) ATI Proprietary Linux Driver Version Identifier:8.88.7
[ 19.520] (II) ATI Proprietary Linux Driver Release Identifier: 8.881
[ 19.520] (II) ATI Proprietary Linux Driver Build Date: Jul 28 2011 17:04:01
[ 19.520] (++) using VT number 8
[ 19.526] (WW) Falling back to old probe method for v4l
[ 19.526] (WW) Falling back to old probe method for fglrx
[ 19.553] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 19.562] (--) Assigning device section with no busID to primary device
[ 19.562] (--) Chipset Supported AMD Graphics Processor (0x9490) found
[ 19.564] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[ 19.564] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 19.564] (II) AMD Video driver is signed
[ 19.564] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 19.564] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 19.564] (II) fglrx(0): pEnt->device->identifier=0x133d0f0
[ 19.564] (II) fglrx(0): === [xdl_xs110_atiddxPreInit] === begin
[ 19.564] (II) Loading sub module "vgahw"
[ 19.564] (II) LoadModule: "vgahw"
[ 19.565] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[ 19.565] (II) Module vgahw: vendor="X.Org Foundation"
[ 19.565] compiled for 1.10.1, module version = 0.1.0
[ 19.565] ABI class: X.Org Video Driver, version 10.0
[ 19.565] (II) fglrx(0): Creating default Display subsection in Screen section
"screen1" for depth/fbbpp 24/32
[ 19.565] (==) fglrx(0): Depth 24, (==) framebuffer bpp 32
[ 19.565] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 19.565] (==) fglrx(0): Default visual is TrueColor
[ 19.565] (**) fglrx(0): Option "DPMS"
[ 19.565] (==) fglrx(0): RGB weight 888
[ 19.565] (II) fglrx(0): Using 8 bits per RGB
[ 19.565] (==) fglrx(0): Buffer Tiling is ON
[ 19.566] (II) Loading sub module "fglrxdrm"
[ 19.566] (II) LoadModule: "fglrxdrm"
[ 19.566] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 19.566] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 19.566] compiled for 1.4.99.906, module version = 8.88.7
[ 19.568] ukiDynamicMajor: found major device number 251
[ 19.568] ukiDynamicMajor: found major device number 251
[ 19.568] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 19.568] ukiOpenDevice: node name is /dev/ati/card0
[ 19.568] ukiOpenDevice: open result is 11, (OK)
[ 19.568] ukiOpenByBusid: ukiOpenMinor returns 11
[ 19.568] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 19.568] (==) fglrx(0): NoAccel = NO
[ 19.568] (==) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 19.568] (--) fglrx(0): Chipset: "ATI Radeon HD 4600 Series" (Chipset = 0x9490)
[ 19.568] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0xe100)
[ 19.568] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 19.568] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 19.568] (--) fglrx(0): MMIO registers at 0xe5000000
[ 19.568] (--) fglrx(0): I/O port at 0x0000a000
[ 19.568] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 19.570] (II) fglrx(0): AC Adapter is used
[ 19.578] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 19.578] (II) Loading sub module "vbe"
[ 19.578] (II) LoadModule: "vbe"
[ 19.579] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 19.579] (II) Module vbe: vendor="X.Org Foundation"
[ 19.579] compiled for 1.10.1, module version = 1.1.0
[ 19.579] ABI class: X.Org Video Driver, version 10.0
[ 19.580] (II) fglrx(0): VESA BIOS detected
[ 19.580] (II) fglrx(0): VESA VBE Version 3.0
[ 19.580] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 19.580] (II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
[ 19.580] (II) fglrx(0): VESA VBE OEM Software Rev: 11.15
[ 19.580] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
[ 19.580] (II) fglrx(0): VESA VBE OEM Product: 016
[ 19.580] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 19.613] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 19.613] (--) fglrx(0): Video RAM: 524288 kByte, Type: GDDR3
[ 19.613] (II) fglrx(0): PCIE card detected
[ 19.613] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 19.613] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 19.616] (II) fglrx(0): Using adapter: 1:0.0.
[ 19.647] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 19.662] (II) fglrx(0): Interrupt handler installed at IRQ 49.
[ 19.662] (II) fglrx(0): RandR 1.2 support is enabled!
[ 19.662] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 19.662] (==) fglrx(0): Center Mode is disabled
[ 19.662] (II) Loading sub module "fb"
[ 19.662] (II) LoadModule: "fb"
[ 19.663] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 19.663] (II) Module fb: vendor="X.Org Foundation"
[ 19.663] compiled for 1.10.1, module version = 1.0.0
[ 19.663] ABI class: X.Org ANSI C Emulation, version 0.4
[ 19.663] (II) Loading sub module "ddc"
[ 19.663] (II) LoadModule: "ddc"
[ 19.663] (II) Module "ddc" already built-in
[ 20.079] (II) fglrx(0): Finished Initialize PPLIB!
[ 20.084] (II) fglrx(0): Output DFP1 using monitor section monitor1
[ 20.084] (II) fglrx(0): Output DFP2 has no monitor section
[ 20.084] (II) fglrx(0): Output CRT1 has no monitor section
[ 20.084] (II) fglrx(0): Output CRT2 has no monitor section
[ 20.084] (II) Loading sub module "ddc"
[ 20.084] (II) LoadModule: "ddc"
[ 20.084] (II) Module "ddc" already built-in
[ 20.084] (II) fglrx(0): Connected Display0: DFP1
[ 20.084] (II) fglrx(0): Display0 EDID data ---------------------------
[ 20.084] (II) fglrx(0): Manufacturer: SAM Model: 3e5 Serial#: 1415000626
[ 20.084] (II) fglrx(0): Year: 2008 Week: 38
[ 20.084] (II) fglrx(0): EDID Version: 1.3
[ 20.084] (II) fglrx(0): Digital Display Input
[ 20.084] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 20.084] (II) fglrx(0): Gamma: 2.20
[ 20.084] (II) fglrx(0): DPMS capabilities: Off
[ 20.084] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 20.084] (II) fglrx(0): First detailed timing is preferred mode
[ 20.084] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 20.084] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 20.084] (II) fglrx(0): Supported established timings:
[ 20.084] (II) fglrx(0): 720x400@70Hz
[ 20.084] (II) fglrx(0): 640x480@60Hz
[ 20.084] (II) fglrx(0): 640x480@67Hz
[ 20.084] (II) fglrx(0): 640x480@72Hz
[ 20.084] (II) fglrx(0): 640x480@75Hz
[ 20.084] (II) fglrx(0): 800x600@56Hz
[ 20.084] (II) fglrx(0): 800x600@60Hz
[ 20.084] (II) fglrx(0): 800x600@72Hz
[ 20.084] (II) fglrx(0): 800x600@75Hz
[ 20.084] (II) fglrx(0): 832x624@75Hz
[ 20.084] (II) fglrx(0): 1024x768@60Hz
[ 20.084] (II) fglrx(0): 1024x768@70Hz
[ 20.084] (II) fglrx(0): 1024x768@75Hz
[ 20.084] (II) fglrx(0): 1280x1024@75Hz
[ 20.084] (II) fglrx(0): 1152x864@75Hz
[ 20.084] (II) fglrx(0): Manufacturer's mask: 0
[ 20.084] (II) fglrx(0): Supported standard timings:
[ 20.084] (II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 20.084] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 20.084] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 20.084] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 20.084] (II) fglrx(0): Supported detailed timing:
[ 20.084] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 296 mm
[ 20.084] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 20.084] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 20.084] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 20.084] (II) fglrx(0): Monitor name: SyncMaster
[ 20.084] (II) fglrx(0): Serial No: H9XQ920527
[ 20.084] (II) fglrx(0): EDID (in hex):
[ 20.084] (II) fglrx(0): 00ffffffffffff004c2de50332325754
[ 20.084] (II) fglrx(0): 26120103802f1e782aee91a3544c9926
[ 20.084] (II) fglrx(0): 0f5054bfef80b30081808140714f0101
[ 20.084] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
[ 20.084] (II) fglrx(0): 3600da281100001a000000fd00384b1e
[ 20.084] (II) fglrx(0): 510e000a202020202020000000fc0053
[ 20.084] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 20.084] (II) fglrx(0): 00483958513932303532370a20200025
[ 20.084] (II) fglrx(0): End of Display0 EDID data --------------------
[ 20.151] (II) fglrx(0): EDID for output DFP1
[ 20.151] (II) fglrx(0): Manufacturer: SAM Model: 3e5 Serial#: 1415000626
[ 20.151] (II) fglrx(0): Year: 2008 Week: 38
[ 20.151] (II) fglrx(0): EDID Version: 1.3
[ 20.151] (II) fglrx(0): Digital Display Input
[ 20.151] (II) fglrx(0): Max Image Size [cm]: horiz.: 47 vert.: 30
[ 20.151] (II) fglrx(0): Gamma: 2.20
[ 20.151] (II) fglrx(0): DPMS capabilities: Off
[ 20.151] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 20.151] (II) fglrx(0): First detailed timing is preferred mode
[ 20.151] (II) fglrx(0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
[ 20.151] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.312 whiteY: 0.329
[ 20.151] (II) fglrx(0): Supported established timings:
[ 20.151] (II) fglrx(0): 720x400@70Hz
[ 20.151] (II) fglrx(0): 640x480@60Hz
[ 20.151] (II) fglrx(0): 640x480@67Hz
[ 20.151] (II) fglrx(0): 640x480@72Hz
[ 20.151] (II) fglrx(0): 640x480@75Hz
[ 20.151] (II) fglrx(0): 800x600@56Hz
[ 20.151] (II) fglrx(0): 800x600@60Hz
[ 20.151] (II) fglrx(0): 800x600@72Hz
[ 20.151] (II) fglrx(0): 800x600@75Hz
[ 20.151] (II) fglrx(0): 832x624@75Hz
[ 20.151] (II) fglrx(0): 1024x768@60Hz
[ 20.151] (II) fglrx(0): 1024x768@70Hz
[ 20.151] (II) fglrx(0): 1024x768@75Hz
[ 20.151] (II) fglrx(0): 1280x1024@75Hz
[ 20.151] (II) fglrx(0): 1152x864@75Hz
[ 20.151] (II) fglrx(0): Manufacturer's mask: 0
[ 20.151] (II) fglrx(0): Supported standard timings:
[ 20.151] (II) fglrx(0): #0: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 20.151] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 20.151] (II) fglrx(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 20.151] (II) fglrx(0): #3: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 20.151] (II) fglrx(0): Supported detailed timing:
[ 20.151] (II) fglrx(0): clock: 119.0 MHz Image Size: 474 x 296 mm
[ 20.151] (II) fglrx(0): h_active: 1680 h_sync: 1728 h_sync_end 1760 h_blank_end 1840 h_border: 0
[ 20.151] (II) fglrx(0): v_active: 1050 v_sync: 1053 v_sync_end 1059 v_blanking: 1080 v_border: 0
[ 20.151] (II) fglrx(0): Ranges: V min: 56 V max: 75 Hz, H min: 30 H max: 81 kHz, PixClock max 145 MHz
[ 20.151] (II) fglrx(0): Monitor name: SyncMaster
[ 20.151] (II) fglrx(0): Serial No: H9XQ920527
[ 20.151] (II) fglrx(0): EDID (in hex):
[ 20.151] (II) fglrx(0): 00ffffffffffff004c2de50332325754
[ 20.151] (II) fglrx(0): 26120103802f1e782aee91a3544c9926
[ 20.151] (II) fglrx(0): 0f5054bfef80b30081808140714f0101
[ 20.151] (II) fglrx(0): 0101010101017c2e90a0601a1e403020
[ 20.151] (II) fglrx(0): 3600da281100001a000000fd00384b1e
[ 20.151] (II) fglrx(0): 510e000a202020202020000000fc0053
[ 20.151] (II) fglrx(0): 796e634d61737465720a2020000000ff
[ 20.151] (II) fglrx(0): 00483958513932303532370a20200025
[ 20.151] (II) fglrx(0): EDID vendor "SAM", prod id 997
[ 20.151] (II) fglrx(0): Using hsync ranges from config file
[ 20.151] (II) fglrx(0): Using vrefresh ranges from config file
[ 20.151] (II) fglrx(0): Printing DDC gathered Modelines:
[ 20.151] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 20.151] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 20.151] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 20.151] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 20.151] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 20.151] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 20.151] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 20.151] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 20.151] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 20.151] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 20.151] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 20.151] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 20.151] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 20.151] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 20.151] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 20.151] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 20.151] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 20.151] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 20.152] (II) fglrx(0): Printing probed modes for output DFP1
[ 20.152] (II) fglrx(0): Modeline "1680x1050"x60.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 -hsync +vsync (64.7 kHz)
[ 20.152] (II) fglrx(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 +hsync -vsync (65.3 kHz)
[ 20.152] (II) fglrx(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 -hsync -vsync (60.0 kHz)
[ 20.152] (II) fglrx(0): Modeline "1360x1024"x60.0 116.01 1360 1448 1592 1824 1024 1025 1028 1060 +hsync -vsync (63.6 kHz)
[ 20.152] (II) fglrx(0): Modeline "1440x900"x60.0 106.50 1440 1520 1672 1904 900 903 909 934 +hsync -vsync (55.9 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x800"x60.0 83.46 1280 1344 1480 1680 800 801 804 828 +hsync -vsync (49.7 kHz)
[ 20.152] (II) fglrx(0): Modeline "1152x648"x60.0 59.90 1152 1200 1320 1488 648 649 652 671 +hsync -vsync (40.3 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 -hsync -vsync (80.0 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 -hsync -vsync (64.0 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x960"x75.0 129.86 1280 1368 1504 1728 960 961 964 1002 +hsync -vsync (75.2 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 -hsync -vsync (60.0 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x800"x75.0 107.21 1280 1360 1496 1712 800 801 804 835 +hsync -vsync (62.6 kHz)
[ 20.152] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 -hsync -vsync (67.5 kHz)
[ 20.152] (II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync -vsync (53.7 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x768"x75.0 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync -vsync (47.8 kHz)
[ 20.152] (II) fglrx(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 -hsync -vsync (45.0 kHz)
[ 20.152] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 -hsync -vsync (60.0 kHz)
[ 20.152] (II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
[ 20.152] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
[ 20.152] (II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 -hsync -vsync (48.1 kHz)
[ 20.152] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 -hsync -vsync (46.9 kHz)
[ 20.152] (II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync -vsync (43.8 kHz)
[ 20.152] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 -hsync -vsync (37.9 kHz)
[ 20.152] (II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 -hsync -vsync (35.2 kHz)
[ 20.152] (II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync -vsync (29.8 kHz)
[ 20.152] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
[ 20.152] (II) fglrx(0): Modeline "640x480"x72.0 31.50 640 656 696 832 480 481 484 520 +hsync +vsync (37.9 kHz)
[ 20.152] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 648 744 800 480 482 484 525 +hsync +vsync (31.5 kHz)
[ 20.152] (II) fglrx(0): EDID for output DFP2
[ 20.152] (II) fglrx(0): EDID for output CRT1
[ 20.152] (II) fglrx(0): EDID for output CRT2
[ 20.152] (II) fglrx(0): Output DFP1 connected
[ 20.152] (II) fglrx(0): Output DFP2 disconnected
[ 20.152] (II) fglrx(0): Output CRT1 disconnected
[ 20.152] (II) fglrx(0): Output CRT2 disconnected
[ 20.152] (II) fglrx(0): Using exact sizes for initial modes
[ 20.152] (II) fglrx(0): Output DFP1 using initial mode 1680x1050
[ 20.152] (II) fglrx(0): Display dimensions: (470, 300) mm
[ 20.152] (II) fglrx(0): DPI set to (90, 88)
[ 20.152] (II) fglrx(0): Adapter ATI Radeon HD 4600 Series has 2 configurable heads and 1 displays connected.
[ 20.153] (==) fglrx(0): PseudoColor visuals disabled
[ 20.153] (II) Loading sub module "ramdac"
[ 20.153] (II) LoadModule: "ramdac"
[ 20.153] (II) Module "ramdac" already built-in
[ 20.153] (==) fglrx(0): NoDRI = NO
[ 20.153] (==) fglrx(0): Capabilities: 0x00000000
[ 20.153] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 20.153] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 20.153] (==) fglrx(0): UseFastTLS=0
[ 20.153] (==) fglrx(0): BlockSignalsOnLock=1
[ 20.153] (--) Depth 24 pixmap format is 32 bpp
[ 20.154] (II) Loading extension ATIFGLRXDRI
[ 20.154] (II) fglrx(0): doing swlDriScreenInit
[ 20.154] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 20.154] ukiDynamicMajor: found major device number 251
[ 20.154] ukiDynamicMajor: found major device number 251
[ 20.154] ukiDynamicMajor: found major device number 251
[ 20.154] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 20.154] ukiOpenDevice: node name is /dev/ati/card0
[ 20.154] ukiOpenDevice: open result is 16, (OK)
[ 20.154] ukiOpenByBusid: ukiOpenMinor returns 16
[ 20.154] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 20.154] (II) fglrx(0): [uki] DRM interface version 1.0
[ 20.154] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 20.154] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 20.154] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f7bc0e24000
[ 20.154] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 20.154] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 20.154] (II) fglrx(0): swlDriScreenInit done
[ 20.155] (II) fglrx(0): Kernel Module Version Information:
[ 20.155] (II) fglrx(0): Name: fglrx
[ 20.155] (II) fglrx(0): Version: 8.88.7
[ 20.155] (II) fglrx(0): Date: Jul 28 2011
[ 20.155] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 20.155] (II) fglrx(0): Kernel Module version matches driver.
[ 20.155] (II) fglrx(0): Kernel Module Build Time Information:
[ 20.155] (II) fglrx(0): Build-Kernel UTS_RELEASE: 2.6.38.8-desktop-6.mga
[ 20.155] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 20.155] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 20.155] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 20.155] (II) fglrx(0): [uki] register handle = 0x00004000
[ 20.172] (II) fglrx(0): DRI initialization successfull
[ 20.172] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01008000
[ 20.173] (==) fglrx(0): Backing store disabled
[ 20.173] (II) Loading extension FGLRXEXTENSION
[ 20.173] (**) fglrx(0): DPMS enabled
[ 20.173] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 20.173] (**) fglrx(0): Textured Video is enabled.
[ 20.173] (II) LoadModule: "glesx"
[ 20.173] (II) Loading /usr/lib64/xorg/modules/glesx.so
[ 20.174] (II) Module glesx: vendor="X.Org Foundation"
[ 20.174] compiled for 1.4.99.906, module version = 1.0.0
[ 20.174] (II) Loading extension GLESX
[ 20.174] (II) fglrx(0): GLESX enableFlags = 528
[ 20.174] (II) fglrx(0): GLESX is enabled
[ 20.174] (II) LoadModule: "amdxmm"
[ 20.174] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[ 20.174] (II) Module amdxmm: vendor="X.Org Foundation"
[ 20.174] compiled for 1.4.99.906, module version = 2.0.0
[ 20.174] (II) Loading extension AMDXVOPL
[ 20.174] (II) Loading extension AMDXVBA
[ 20.174] [- XMM_GLX] [I ]glesxXvInit Configureable RGBOutputColorRange
[ 20.179] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 20.181] (II) fglrx(0): Enable composite support successfully
[ 20.181] (II) fglrx(0): X context handle = 0x1
[ 20.181] (II) fglrx(0): [DRI] installation complete
[ 20.181] (==) fglrx(0): Silken mouse enabled
[ 20.181] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 20.181] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 20.283] (--) RandR disabled
[ 20.283] (II) Initializing built-in extension Generic Event Extension
[ 20.283] (II) Initializing built-in extension SHAPE
[ 20.283] (II) Initializing built-in extension MIT-SHM
[ 20.283] (II) Initializing built-in extension XInputExtension
[ 20.283] (II) Initializing built-in extension XTEST
[ 20.283] (II) Initializing built-in extension BIG-REQUESTS
[ 20.283] (II) Initializing built-in extension SYNC
[ 20.283] (II) Initializing built-in extension XKEYBOARD
[ 20.283] (II) Initializing built-in extension XC-MISC
[ 20.283] (II) Initializing built-in extension SECURITY
[ 20.283] (II) Initializing built-in extension XINERAMA
[ 20.283] (II) Initializing built-in extension XFIXES
[ 20.283] (II) Initializing built-in extension XFree86-Bigfont
[ 20.283] (II) Initializing built-in extension RENDER
[ 20.283] (II) Initializing built-in extension RANDR
[ 20.283] (II) Initializing built-in extension COMPOSITE
[ 20.283] (II) Initializing built-in extension DAMAGE
[ 20.286] ukiDynamicMajor: found major device number 251
[ 20.286] ukiDynamicMajor: found major device number 251
[ 20.286] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 20.286] ukiOpenDevice: node name is /dev/ati/card0
[ 20.286] ukiOpenDevice: open result is 17, (OK)
[ 20.286] ukiOpenByBusid: ukiOpenMinor returns 17
[ 20.286] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 20.963] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 20.974] (II) fglrx(0): Enable the clock gating!
[ 20.974] (II) fglrx(0): Setting screen physical size to 444 x 277
[ 21.312] (II) XKB: generating xkmfile /usr/share/X11/xkb/compiled/server-8AA988DD479FAABEC4FC3CCCF4CC29B4948840B4.xkm
[ 21.338] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 21.338] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.338] (II) LoadModule: "evdev"
[ 21.338] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.338] (II) Module evdev: vendor="X.Org Foundation"
[ 21.338] compiled for 1.10.0, module version = 2.6.0
[ 21.338] Module class: X.Org XInput Driver
[ 21.338] ABI class: X.Org XInput driver, version 12.2
[ 21.338] (II) Using input driver 'evdev' for 'Power Button'
[ 21.338] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.338] (**) Power Button: always reports core events
[ 21.338] (**) Power Button: Device: "/dev/input/event4"
[ 21.342] (--) Power Button: Found keys
[ 21.342] (II) Power Button: Configuring as keyboard
[ 21.342] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 21.342] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 21.342] (**) Option "xkb_rules" "evdev"
[ 21.342] (**) Option "xkb_model" "pc105"
[ 21.342] (**) Option "xkb_layout" "fr"
[ 21.342] (**) Option "xkb_options" "compose:rwin"
[ 21.343] (II) XKB: generating xkmfile /usr/share/X11/xkb/compiled/server-99CF0FBC2513CEA0B0411022FC44C24CB59D8944.xkm
[ 21.365] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 21.365] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.365] (II) Using input driver 'evdev' for 'Power Button'
[ 21.365] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.366] (**) Power Button: always reports core events
[ 21.366] (**) Power Button: Device: "/dev/input/event3"
[ 21.369] (--) Power Button: Found keys
[ 21.369] (II) Power Button: Configuring as keyboard
[ 21.369] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event3"
[ 21.369] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 21.369] (**) Option "xkb_rules" "evdev"
[ 21.369] (**) Option "xkb_model" "pc105"
[ 21.369] (**) Option "xkb_layout" "fr"
[ 21.369] (**) Option "xkb_options" "compose:rwin"
[ 21.370] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Keyboard 3000 (/dev/input/event0)
[ 21.370] (**) Microsoft Microsoft® Digital Media Keyboard 3000: Applying InputClass "evdev keyboard catchall"
[ 21.370] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Digital Media Keyboard 3000'
[ 21.370] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.370] (**) Microsoft Microsoft® Digital Media Keyboard 3000: always reports core events
[ 21.370] (**) Microsoft Microsoft® Digital Media Keyboard 3000: Device: "/dev/input/event0"
[ 21.379] (--) Microsoft Microsoft® Digital Media Keyboard 3000: Found keys
[ 21.379] (II) Microsoft Microsoft® Digital Media Keyboard 3000: Configuring as keyboard
[ 21.379] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input0/event0"
[ 21.379] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Keyboard 3000" (type: KEYBOARD)
[ 21.379] (**) Option "xkb_rules" "evdev"
[ 21.379] (**) Option "xkb_model" "pc105"
[ 21.379] (**) Option "xkb_layout" "fr"
[ 21.379] (**) Option "xkb_options" "compose:rwin"
[ 21.379] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Keyboard 3000 (/dev/input/event1)
[ 21.379] (**) Microsoft Microsoft® Digital Media Keyboard 3000: Applying InputClass "evdev keyboard catchall"
[ 21.379] (II) Using input driver 'evdev' for 'Microsoft Microsoft® Digital Media Keyboard 3000'
[ 21.379] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.379] (**) Microsoft Microsoft® Digital Media Keyboard 3000: always reports core events
[ 21.379] (**) Microsoft Microsoft® Digital Media Keyboard 3000: Device: "/dev/input/event1"
[ 21.382] (--) Microsoft Microsoft® Digital Media Keyboard 3000: Found 1 mouse buttons
[ 21.382] (--) Microsoft Microsoft® Digital Media Keyboard 3000: Found scroll wheel(s)
[ 21.382] (--) Microsoft Microsoft® Digital Media Keyboard 3000: Found relative axes
[ 21.382] (--) Microsoft Microsoft® Digital Media Keyboard 3000: Found absolute axes
[ 21.382] (--) Microsoft Microsoft® Digital Media Keyboard 3000: Found x and y absolute axes
[ 21.382] (--) Microsoft Microsoft® Digital Media Keyboard 3000: Found keys
[ 21.382] (II) Microsoft Microsoft® Digital Media Keyboard 3000: Configuring as mouse
[ 21.382] (II) Microsoft Microsoft® Digital Media Keyboard 3000: Configuring as keyboard
[ 21.382] (II) Microsoft Microsoft® Digital Media Keyboard 3000: Adding scrollwheel support
[ 21.382] (**) Microsoft Microsoft® Digital Media Keyboard 3000: YAxisMapping: buttons 4 and 5
[ 21.382] (**) Microsoft Microsoft® Digital Media Keyboard 3000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.382] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input1/event1"
[ 21.382] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Keyboard 3000" (type: KEYBOARD)
[ 21.382] (**) Option "xkb_rules" "evdev"
[ 21.382] (**) Option "xkb_model" "pc105"
[ 21.382] (**) Option "xkb_layout" "fr"
[ 21.382] (**) Option "xkb_options" "compose:rwin"
[ 21.382] (EE) Microsoft Microsoft® Digital Media Keyboard 3000: failed to initialize for relative axes.
[ 21.382] (WW) Microsoft Microsoft® Digital Media Keyboard 3000: found 37 axes, limiting to 36.
[ 21.382] (II) Microsoft Microsoft® Digital Media Keyboard 3000: initialized for absolute axes.
[ 21.382] (**) Microsoft Microsoft® Digital Media Keyboard 3000: (accel) keeping acceleration scheme 1
[ 21.382] (**) Microsoft Microsoft® Digital Media Keyboard 3000: (accel) acceleration profile 0
[ 21.382] (**) Microsoft Microsoft® Digital Media Keyboard 3000: (accel) acceleration factor: 2.000
[ 21.382] (**) Microsoft Microsoft® Digital Media Keyboard 3000: (accel) acceleration threshold: 4
[ 21.382] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Keyboard 3000 (/dev/input/js0)
[ 21.382] (II) No input driver/identifier specified (ignoring)
[ 21.386] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 21.386] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 21.386] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 21.386] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 21.386] (**) Logitech USB Receiver: always reports core events
[ 21.386] (**) Logitech USB Receiver: Device: "/dev/input/event2"
[ 21.389] (--) Logitech USB Receiver: Found 20 mouse buttons
[ 21.389] (--) Logitech USB Receiver: Found scroll wheel(s)
[ 21.389] (--) Logitech USB Receiver: Found relative axes
[ 21.389] (--) Logitech USB Receiver: Found x and y relative axes
[ 21.389] (II) Logitech USB Receiver: Configuring as mouse
[ 21.389] (II) Logitech USB Receiver: Adding scrollwheel support
[ 21.389] (**) Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 21.389] (**) Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 21.389] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input2/event2"
[ 21.389] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE)
[ 21.389] (II) Logitech USB Receiver: initialized for relative axes.
[ 21.389] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 21.389] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 21.389] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 21.389] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 21.389] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 21.389] (II) No input driver/identifier specified (ignoring)
[ 21.436] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 28.045] (II) XKB: generating xkmfile /usr/share/X11/xkb/compiled/server-4527A01B31A06E494170319A40035E42AF2B1989.xkm
[ 28.147] (II) XKB: generating xkmfile /usr/share/X11/xkb/compiled/server-E1F5A607D2AC4CF885D4406EABA22FB30AD247EB.xkm
[ 30.785] (II) fglrx(0): EDID vendor "SAM", prod id 997
[ 31.272] (II) fglrx(0): Using hsync ranges from config file
[ 31.272] (II) fglrx(0): Using vrefresh ranges from config file
[ 31.272] (II) fglrx(0): Printing DDC gathered Modelines:
[ 31.272] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 31.272] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 31.272] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 31.272] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 31.272] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 31.272] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 31.272] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 31.272] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 31.272] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 31.272] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 31.272] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 31.272] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 31.272] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 31.272] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 31.272] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 31.272] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 31.272] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 31.272] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 55.479] (II) fglrx(0): EDID vendor "SAM", prod id 997
[ 55.479] (II) fglrx(0): Using hsync ranges from config file
[ 55.479] (II) fglrx(0): Using vrefresh ranges from config file
[ 55.479] (II) fglrx(0): Printing DDC gathered Modelines:
[ 55.479] (II) fglrx(0): Modeline "1680x1050"x0.0 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz)
[ 55.479] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 55.479] (II) fglrx(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 55.479] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 55.479] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 55.479] (II) fglrx(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 55.479] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 55.479] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 55.479] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 55.479] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 55.479] (II) fglrx(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 55.479] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 55.479] (II) fglrx(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 55.479] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 55.479] (II) fglrx(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 55.479] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 55.479] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 55.479] (II) fglrx(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 68.465] (II) XKB: generating xkmfile /usr/share/X11/xkb/compiled/server-E9C7160E4027E617E6745C2E4579CF6C0A2EF2C7.xkm
[ 131.123] (II) XKB: generating xkmfile /usr/share/X11/xkb/compiled/server-E9C7160E4027E617E6745C2E4579CF6C0A2EF2C7.xkm
[ 187.309] (II) XKB: generating xkmfile /usr/share/X11/xkb/compiled/server-E9C7160E4027E617E6745C2E4579CF6C0A2EF2C7.xkm
Citation :
Est ce que le devels d'un autre kernel est installé, quand tu passe sur un kernel plus récent ?
Comment je vérifies ?
[root@Antec /]# modprobe rt8192se
FATAL: Module rt8192se not found.
Ensuite ?
PaLmAs Membre non connecté
-
- Voir le profil du membre PaLmAs
- Inscrit le : 02/04/2007
- Groupes :
Donc on reprends étapes par étapes !
Passe sur le noyau le plus récent, vérifie que le kernel-devel du nouveau noyau est bien installé et que le dkms et firmware de carte wifi aussi !
reboute si tous va bien il doit mettre plus de temps pour rebouter (1 seule fois) car il doit créer le module.
Si ça marche pas ouvre une console en root et tape:
moprobe r8192se_pci
si réponse FATAL: Module rt8192se not found.
c qu'il a pas compilé! faudra alors le faire à la mimine !
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
Alors j'obtiens $ : FATAL : Error inserting r8192se_pci (/lib/modules/2.6.38.8-desktop-6.mga/dkms/drivers/net/wireless/r8192se_pci.ko.gz) : invalid format
Donc, je rebbote sur le noyau 7, je tape modprobe r8192se_pci et ... retour à la ligne, sans rien dire.
Je passe en MCC, config matériel, carte wifi et je reçois carte Realtek 8191seVb avec pilote r8192se_pci.
Donc, si je comprends bien, en fait, j'ai une carte 8191 et non 92, mais sur le noyau 7, elle fonctionne avec le rpm rtl8192se et le pilote de la 92 ! Mais pas pour le noyau 8.
Alors, que fais-je ? D'autant que maintenant je trouve des utilisateurs qui sont en rade avec leur 8191.
J'étais content de m'en sortir avec la 92 et paf !
En attendant, merci beaucoup de tes recherches, et j'attends impatiemment de tes nouvelles
PaLmAs Membre non connecté
-
- Voir le profil du membre PaLmAs
- Inscrit le : 02/04/2007
- Groupes :
vérifie que le paquet kernel-firmware-extra est installé, et désinstalle les dkms-8192 . et bien sur, passe sur le dernier noyau avec son kernel-devel.
Si ça marche pas faudra revenir à l'ancien kernel et reinstaller le dkms.
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie