******************************************************************************** * lspci ******************************************************************************** r8169 : Realtek Semiconductor Co., Ltd.|RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [NETWORK_ETHERNET] (subv:103c subd:3387) bcma : Broadcom Corporation|BCM4313 802.11bgn Wireless Network Adapter [NETWORK_OTHER] (subv:103c subd:1795) unknown : Advanced Micro Devices, Inc. [AMD]|Family 12h/14h Processor Function 7 [BRIDGE_HOST] unknown : Advanced Micro Devices, Inc. [AMD]|Family 12h/14h Processor Function 5 [BRIDGE_HOST] unknown : Advanced Micro Devices, Inc. [AMD]|Family 12h/14h Processor Function 6 [BRIDGE_HOST] unknown : Advanced Micro Devices, Inc. [AMD]|Family 12h/14h Processor Function 4 [BRIDGE_HOST] unknown : Advanced Micro Devices, Inc. [AMD]|Family 12h/14h Processor Function 3 [BRIDGE_HOST] unknown : Advanced Micro Devices, Inc. [AMD]|Family 12h/14h Processor Function 2 [BRIDGE_HOST] unknown : Advanced Micro Devices, Inc. [AMD]|Family 12h/14h Processor Function 1 [BRIDGE_HOST] unknown : Advanced Micro Devices, Inc. [AMD]|Family 12h/14h Processor Function 0 [BRIDGE_HOST] ehci_pci : Advanced Micro Devices, Inc. [AMD/ATI]|SB7x0/SB8x0/SB9x0 USB EHCI Controller [SERIAL_USB] (subv:103c subd:3387) ohci_pci : Advanced Micro Devices, Inc. [AMD/ATI]|SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [SERIAL_USB] (subv:103c subd:3387) unknown : Advanced Micro Devices, Inc. [AMD/ATI]|SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) [BRIDGE_PCI] unknown : Advanced Micro Devices, Inc. [AMD/ATI]|SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [BRIDGE_PCI] unknown : Advanced Micro Devices, Inc. [AMD/ATI]|SBx00 PCI to PCI Bridge [BRIDGE_PCI] unknown : Advanced Micro Devices, Inc. [AMD/ATI]|SB7x0/SB8x0/SB9x0 LPC host controller [BRIDGE_ISA] (subv:103c subd:3387) snd_hda_intel : Advanced Micro Devices, Inc. [AMD/ATI]|SBx00 Azalia (Intel HDA) [MULTIMEDIA_AUDIO_DEV] (subv:103c subd:3387) i2c_piix4 : Advanced Micro Devices, Inc. [AMD/ATI]|SBx00 SMBus Controller [SERIAL_SMBUS] (subv:103c subd:3387) ehci_pci : Advanced Micro Devices, Inc. [AMD/ATI]|SB7x0/SB8x0/SB9x0 USB EHCI Controller [SERIAL_USB] (subv:103c subd:3387) ohci_pci : Advanced Micro Devices, Inc. [AMD/ATI]|SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [SERIAL_USB] (subv:103c subd:3387) ehci_pci : Advanced Micro Devices, Inc. [AMD/ATI]|SB7x0/SB8x0/SB9x0 USB EHCI Controller [SERIAL_USB] (subv:103c subd:3387) ohci_pci : Advanced Micro Devices, Inc. [AMD/ATI]|SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [SERIAL_USB] (subv:103c subd:3387) unknown : Advanced Micro Devices, Inc. [AMD/ATI]|SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [STORAGE_SATA] (subv:103c subd:3387) unknown : Advanced Micro Devices, Inc. [AMD]|Family 14h Processor Root Port [BRIDGE_PCI] snd_hda_intel : Advanced Micro Devices, Inc. [AMD/ATI]|Wrestler HDMI Audio [MULTIMEDIA_AUDIO_DEV] (subv:103c subd:3387) Card:ATI Radeon HD 5000 to HD 6300 (radeon/fglrx): Advanced Micro Devices, Inc. [AMD/ATI]|Wrestler [Radeon HD 6320] [DISPLAY_VGA] (subv:103c subd:3387) unknown : Advanced Micro Devices, Inc. [AMD]|Family 14h Processor Root Complex [BRIDGE_HOST] hub : Linux 3.19.8-desktop-3.mga5 ohci_hcd|OHCI PCI host controller [Hub|Unused|Full speed (or root) hub] btusb : Broadcom Corp|BCM20702A0 hub : Linux 3.19.8-desktop-3.mga5 ohci_hcd|OHCI PCI host controller [Hub|Unused|Full speed (or root) hub] hub : Linux 3.19.8-desktop-3.mga5 ohci_hcd|OHCI PCI host controller [Hub|Unused|Full speed (or root) hub] hub : Linux 3.19.8-desktop-3.mga5 ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub] hub : Linux 3.19.8-desktop-3.mga5 ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub] usb_storage : |USB0612A [Mass Storage|SCSI|Bulk-Only] hub : Linux 3.19.8-desktop-3.mga5 ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub] uvcvideo : SuYin|HP TrueVision HD [Video|Video Control] sysrq : |AT Translated Set 2 keyboard mouse0 : |SynPS/2 Synaptics TouchPad kbd : |Video Bus event3 : |ST LIS3LV02DL Accelerometer kbd : |HP WMI hotkeys ******************************************************************************** * pci_devices ******************************************************************************** 0000 10221510 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0008 10029806 b e0000008 4001 f0300000 0 0 0 2 10000000 100 40000 0 0 0 0 0009 10021314 a f0344000 0 0 0 0 0 0 4000 0 0 0 0 0 0 0020 10221512 18 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 0088 10024394 13 4119 4125 4111 4121 4101 f034e000 0 8 4 8 4 10 400 0 ahci 0090 10024397 12 f034d000 0 0 0 0 0 0 1000 0 0 0 0 0 0 ohci-pci 0092 10024396 11 f034c000 0 0 0 0 0 0 100 0 0 0 0 0 0 ehci-pci 0098 10024397 12 f034b000 0 0 0 0 0 0 1000 0 0 0 0 0 0 ohci-pci 009a 10024396 11 f034a000 0 0 0 0 0 0 100 0 0 0 0 0 0 ehci-pci 00a0 10024385 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 piix4_smbus 00a2 10024383 3 f0340004 0 0 0 0 0 0 4000 0 0 0 0 0 0 00a3 1002439d 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00a4 10024384 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00a8 100243a0 10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 00a9 100243a1 10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 pcieport 00b0 10024397 12 f0349000 0 0 0 0 0 0 1000 0 0 0 0 0 0 ohci-pci 00b2 10024396 11 f0348000 0 0 0 0 0 0 100 0 0 0 0 0 0 ehci-pci 00c0 10221700 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00c1 10221701 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00c2 10221702 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00c3 10221703 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00c4 10221704 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00c5 10221718 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00c6 10221716 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 00c7 10221719 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0300 14e44727 10 f0200004 0 0 0 0 0 0 4000 0 0 0 0 0 0 bcma-pci-bridge 0700 10ec8168 19 2001 0 f010400c 0 f010000c 0 0 100 0 1000 0 4000 0 0 r8169 ******************************************************************************** * dmidecode ******************************************************************************** # dmidecode 2.12 SMBIOS 2.7 present. 22 structures occupying 1313 bytes. Table at 0x000E3FC0. Handle 0x0000, DMI type 0, 24 bytes BIOS Information Vendor: Hewlett-Packard Version: F.13 Release Date: 12/13/2011 Address: 0xFFE00 Runtime Size: 512 bytes ROM Size: 2048 kB Characteristics: PCI is supported BIOS is upgradeable BIOS shadowing is allowed Boot from CD is supported Selectable boot is supported BIOS ROM is socketed EDD is supported Japanese floppy for NEC 9800 1.2 MB is supported (int 13h) Japanese floppy for Toshiba 1.2 MB is supported (int 13h) 5.25"/360 kB floppy services are supported (int 13h) 5.25"/1.2 MB floppy services are supported (int 13h) 3.5"/720 kB floppy services are supported (int 13h) 3.5"/2.88 MB floppy services are supported (int 13h) 8042 keyboard services are supported (int 9h) CGA/mono video services are supported (int 10h) ACPI is supported USB legacy is supported Targeted content distribution is supported BIOS Revision: 15.19 Firmware Revision: 36.21 Handle 0x0001, DMI type 1, 27 bytes System Information Manufacturer: Hewlett-Packard Product Name: HP Pavilion dm1 Notebook PC Version: 0696110000204600000320100 Serial Number: 5CD2136WGM UUID: 32444335-3331-5736-474D-80C16E54B181 Wake-up Type: Power Switch SKU Number: B1F74EA#ABF Family: 103C_5335KV G=N L=CON B=HP S=PAV Handle 0x0002, DMI type 2, 16 bytes Base Board Information Manufacturer: Hewlett-Packard Product Name: 3387 Version: 36.15 Serial Number: PCLGN012C1M5YD Asset Tag: Base Board Asset Tag Features: Board is a hosting board Board is replaceable Location In Chassis: Base Board Chassis Location Chassis Handle: 0x0003 Type: Motherboard Contained Object Handles: 0 Handle 0x0003, DMI type 3, 23 bytes Chassis Information Manufacturer: Hewlett-Packard Type: Notebook Lock: Not Present Version: Chassis Version Serial Number: Chassis Serial Number Asset Tag: Not Specified Boot-up State: Safe Power Supply State: Safe Thermal State: Safe Security Status: None OEM Information: 0x00000046 Height: Unspecified Number Of Power Cords: 1 Contained Elements: 0 SKU Number: Not Specified Handle 0x0004, DMI type 9, 17 bytes System Slot Information Designation: PCI Express Slot 1 Type: x16 PCI Express x16 Current Usage: Available Length: Long ID: 1 Characteristics: 3.3 V is provided PME signal is supported Bus Address: 0000:00:04.0 Handle 0x0005, DMI type 9, 17 bytes System Slot Information Designation: PCI Express Slot 2 Type: x1 PCI Express x1 Current Usage: Available Length: Short ID: 2 Characteristics: 5.0 V is provided 3.3 V is provided Bus Address: 0000:00:15.0 Handle 0x0006, DMI type 9, 17 bytes System Slot Information Designation: PCI Express Slot 3 Type: x1 PCI Express x1 Current Usage: Available Length: Short ID: 3 Characteristics: 5.0 V is provided 3.3 V is provided PME signal is supported Bus Address: 0000:00:15.1 Handle 0x0007, DMI type 11, 5 bytes OEM Strings String 1: $HP$ String 2: LOC#ABF String 3: ABS 70/71 78 79 7A 7B String 4: CNB1 0696110000204600000320100 String 5: HP_Mute_LED_0_A Handle 0x0008, DMI type 22, 26 bytes Portable Battery Location: Primary Manufacturer: 13-24 Name: MT06055 Chemistry: Lithium Ion Design Capacity: 55080 mWh Design Voltage: 10800 mV SBDS Version: 3.1 Maximum Error: 1% SBDS Serial Number: 7C23 SBDS Manufacture Date: 2012-03-22 OEM-specific Information: 0x0000FFFF Handle 0x0009, DMI type 32, 20 bytes System Boot Information Status: No errors detected Handle 0x000A, DMI type 41, 11 bytes Onboard Device Reference Designation: Broadcom 802.11n+BT combo module Type: Other Status: Enabled Type Instance: 1 Bus Address: 0000:03:00.0 Handle 0x000B, DMI type 16, 23 bytes Physical Memory Array Location: System Board Or Motherboard Use: System Memory Error Correction Type: None Maximum Capacity: 8 GB Error Information Handle: No Error Number Of Devices: 2 Handle 0x000C, DMI type 17, 34 bytes Memory Device Array Handle: 0x000B Error Information Handle: Not Provided Total Width: 64 bits Data Width: 8 bits Size: 2048 MB Form Factor: SODIMM Set: None Locator: Bottom-Slot 1(top) Bank Locator: BANK0 Type: DDR3 Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Hynix Serial Number: 49999C74 Asset Tag: Unknown Part Number: HMT325S6CFR8C-PB Rank: 1 Configured Clock Speed: 667 MHz Handle 0x000D, DMI type 20, 35 bytes Memory Device Mapped Address Starting Address: 0x00000000000 Ending Address: 0x0007FFFFFFF Range Size: 2 GB Physical Device Handle: 0x000C Memory Array Mapped Address Handle: 0x0010 Partition Row Position: 1 Handle 0x000E, DMI type 17, 34 bytes Memory Device Array Handle: 0x000B Error Information Handle: Not Provided Total Width: 64 bits Data Width: 8 bits Size: 2048 MB Form Factor: SODIMM Set: None Locator: Bottom-Slot 2(under) Bank Locator: BANK0 Type: DDR3 Type Detail: Synchronous Speed: 1333 MHz Manufacturer: Hynix Serial Number: 49999C7A Asset Tag: Unknown Part Number: HMT325S6CFR8C-PB Rank: 1 Configured Clock Speed: 667 MHz Handle 0x000F, DMI type 20, 35 bytes Memory Device Mapped Address Starting Address: 0x00080000000 Ending Address: 0x000FFFFFFFF Range Size: 2 GB Physical Device Handle: 0x000E Memory Array Mapped Address Handle: 0x0010 Partition Row Position: 1 Handle 0x0010, DMI type 19, 31 bytes Memory Array Mapped Address Starting Address: 0x00000000000 Ending Address: 0x000FFFFFFFF Range Size: 4 GB Physical Array Handle: 0x000B Partition Width: 2 Handle 0x0011, DMI type 4, 42 bytes Processor Information Socket Designation: Socket FT1 Type: Central Processor Family: E-Series Manufacturer: AMD processor ID: 20 0F 50 00 FF FB 8B 17 Signature: Family 20, Model 2, Stepping 0 Flags: FPU (Floating-point unit on-chip) VME (Virtual mode extension) DE (Debugging extension) PSE (Page size extension) TSC (Time stamp counter) MSR (Model specific registers) PAE (Physical address extension) MCE (Machine check exception) CX8 (CMPXCHG8 instruction supported) APIC (On-chip APIC hardware supported) SEP (Fast system call) MTRR (Memory type range registers) PGE (Page global enable) MCA (Machine check architecture) CMOV (Conditional move instruction supported) PAT (Page attribute table) PSE-36 (36-bit page size extension) CLFSH (CLFLUSH instruction supported) MMX (MMX technology supported) FXSR (FXSAVE and FXSTOR instructions supported) SSE (Streaming SIMD extensions) SSE2 (Streaming SIMD extensions 2) HTT (Multi-threading) Version: AMD E-450 APU with Radeon(tm) HD Graphics Voltage: 1.4 V External Clock: 100 MHz Max Speed: 1650 MHz Current Speed: 1650 MHz Status: Populated, Enabled Upgrade: None L1 Cache Handle: 0x0012 L2 Cache Handle: 0x0013 L3 Cache Handle: Not Provided Serial Number: NotSupport Asset Tag: FFFF Part Number: FFFF Core Count: 2 Core Enabled: 2 Thread Count: 2 Characteristics: 64-bit capable Handle 0x0012, DMI type 7, 19 bytes Cache Information Socket Designation: L1 Cache Configuration: Enabled, Not Socketed, Level 1 Operational Mode: Write Back Location: Internal Installed Size: 128 kB Maximum Size: 128 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: 1 ns Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 2-way Set-associative Handle 0x0013, DMI type 7, 19 bytes Cache Information Socket Designation: L2 Cache Configuration: Enabled, Not Socketed, Level 2 Operational Mode: Write Back Location: Internal Installed Size: 1024 kB Maximum Size: 1024 kB Supported SRAM Types: Pipeline Burst Installed SRAM Type: Pipeline Burst Speed: 1 ns Error Correction Type: Multi-bit ECC System Type: Unified Associativity: 16-way Set-associative Handle 0x0014, DMI type 41, 11 bytes Onboard Device Reference Designation: Realtek Gbe Lan Connection Type: Ethernet Status: Enabled Type Instance: 1 Bus Address: 0000:07:00.0 Handle 0x0015, DMI type 127, 4 bytes End Of Table ******************************************************************************** * fdisk ******************************************************************************** Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x3a0712b0 Device Boot Start End Sectors Size Id Type /dev/sda1 * 2048 409599 407552 199M 7 HPFS/NTFS/exFAT /dev/sda2 409600 512425304 512015705 244.2G 7 HPFS/NTFS/exFAT /dev/sda3 512425312 561552074 49126763 23.4G 7 HPFS/NTFS/exFAT /dev/sda4 561555414 976768064 415212651 198G 5 Extended /dev/sda5 561555456 561568139 12684 6.2M b W95 FAT32 /dev/sda6 561571840 561712724 140885 68.8M 83 Linux /dev/sda7 561715200 573375914 11660715 5.6G 82 Linux swap / Solaris /dev/sda8 573378560 607353389 33974830 16.2G 83 Linux /dev/sda9 607356928 620317844 12960917 6.2G 83 Linux /dev/sda10 620320768 976768064 356447297 170G 83 Linux Disk /dev/loop0: 54.2 MiB, 56872960 bytes, 111080 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk /dev/sdb: 246 MiB, 257949184 bytes, 503807 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x07664d8a Device Boot Start End Sectors Size Id Type /dev/sdb1 * 32 503806 503775 246M 6 FAT16 ******************************************************************************** * scsi ******************************************************************************** Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: Hitachi HTS54505 Rev: CA1G Type: Direct-Access ANSI SCSI revision: 05 Host: scsi3 Channel: 00 Id: 00 Lun: 00 Vendor: Model: USB0612A Rev: 4.00 Type: Direct-Access ANSI SCSI revision: 02 ******************************************************************************** * /sys/bus/scsi/devices ******************************************************************************** lrwxrwxrwx root 0 0 Sun Jul 19 09:54 /sys/bus/scsi/devices/0:0:0:0 -> ../../../devices/pci0000:00/0000:00:11.0/ata1/host0/target0:0:0/0:0:0:0 lrwxrwxrwx root 0 0 Sun Jul 19 09:57 /sys/bus/scsi/devices/3:0:0:0 -> ../../../devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/host3/target3:0:0/3:0:0:0 lrwxrwxrwx root 0 0 Sun Jul 19 09:54 /sys/bus/scsi/devices/host0 -> ../../../devices/pci0000:00/0000:00:11.0/ata1/host0 lrwxrwxrwx root 0 0 Sun Jul 19 09:58 /sys/bus/scsi/devices/host3 -> ../../../devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/host3 lrwxrwxrwx root 0 0 Sun Jul 19 09:54 /sys/bus/scsi/devices/target0:0:0 -> ../../../devices/pci0000:00/0000:00:11.0/ata1/host0/target0:0:0 lrwxrwxrwx root 0 0 Sun Jul 19 09:58 /sys/bus/scsi/devices/target3:0:0 -> ../../../devices/pci0000:00/0000:00:13.2/usb2/2-1/2-1:1.0/host3/target3:0:0 ******************************************************************************** * lsmod ******************************************************************************** dm_zero 12529 0 - Live 0xffffffffc0645000 dm_mirror 22040 0 - Live 0xffffffffc06c1000 dm_region_hash 20850 1 dm_mirror, Live 0xffffffffc06ba000 dm_log 18411 2 dm_mirror,dm_region_hash, Live 0xffffffffc065a000 dm_mod 104460 3 dm_zero,dm_mirror,dm_log, Live 0xffffffffc0693000 vfat 17412 2 - Live 0xffffffffc0660000 fat 65946 1 vfat, Live 0xffffffffc0681000 nls_iso8859_1 12713 2 - Live 0xffffffffc0375000 nls_cp437 16991 2 - Live 0xffffffffc0654000 ntfs 101366 3 - Live 0xffffffffc0667000 af_packet 35932 0 - Live 0xffffffffc064a000 squashfs 52719 1 - Live 0xffffffffc04a0000 loop 28511 2 - Live 0xffffffffc034f000 nls_utf8 12557 4 - Live 0xffffffffc02c3000 isofs 39720 1 - Live 0xffffffffc063a000 ide_cd_mod 35360 0 - Live 0xffffffffc03a4000 ide_core 117592 1 ide_cd_mod, Live 0xffffffffc061c000 hid_generic 12559 0 - Live 0xffffffffc02a9000 usbhid 52566 0 - Live 0xffffffffc0396000 hid 114433 2 hid_generic,usbhid, Live 0xffffffffc0483000 sr_mod 22416 1 - Live 0xffffffffc038f000 ums_realtek 18045 0 - Live 0xffffffffc0363000 uas 22414 0 - Live 0xffffffffc0358000 btusb 32376 0 - Live 0xffffffffc036c000 bluetooth 484519 2 btusb, Live 0xffffffffc05a4000 brcmsmac 543192 0 - Live 0xffffffffc051e000 cordic 12574 1 brcmsmac, Live 0xffffffffc02a4000 brcmutil 15781 1 brcmsmac, Live 0xffffffffc027c000 b43 452476 0 - Live 0xffffffffc04ae000 mac80211 616401 2 brcmsmac,b43, Live 0xffffffffc03eb000 videodev 154539 0 - Live 0xffffffffc03c4000 usb_storage 66393 4 ums_realtek,uas, Live 0xffffffffc037d000 media 22084 1 videodev, Live 0xffffffffc0228000 cfg80211 534762 3 brcmsmac,b43,mac80211, Live 0xffffffffc02cb000 ssb 68115 1 b43, Live 0xffffffffc02b1000 mmc_core 130770 2 b43,ssb, Live 0xffffffffc0283000 pcmcia 62299 2 b43,ssb, Live 0xffffffffc026b000 pcmcia_core 23631 1 pcmcia, Live 0xffffffffc01fe000 rng_core 13867 1 b43, Live 0xffffffffc0223000 hp_wmi 14017 0 - Live 0xffffffffc01a9000 sparse_keymap 13948 1 hp_wmi, Live 0xffffffffc0147000 rfkill 22677 3 bluetooth,cfg80211,hp_wmi, Live 0xffffffffc01b3000 microcode 20345 0 - Live 0xffffffffc01f4000 evdev 17752 0 - Live 0xffffffffc01cb000 ohci_pci 13570 0 - Live 0xffffffffc012c000 ohci_hcd 47585 1 ohci_pci, Live 0xffffffffc01e7000 ehci_pci 12914 0 - Live 0xffffffffc0142000 ehci_hcd 79644 1 ehci_pci, Live 0xffffffffc03af000 usbcore 239242 9 usbhid,ums_realtek,uas,btusb,usb_storage,ohci_pci,ohci_hcd,ehci_pci,ehci_hcd, Live 0xffffffffc022f000 snd_pcm 115664 0 - Live 0xffffffffc0205000 r8169 80645 0 - Live 0xffffffffc01d2000 mii 13934 1 r8169, Live 0xffffffffc01ae000 bcma 56953 3 brcmsmac,b43, Live 0xffffffffc01bc000 snd_timer 29458 1 snd_pcm, Live 0xffffffffc01a0000 i2c_piix4 22159 0 - Live 0xffffffffc0195000 usb_common 13057 1 usbcore, Live 0xffffffffc0190000 hp_accel 26119 0 - Live 0xffffffffc0171000 snd 87899 2 snd_pcm,snd_timer, Live 0xffffffffc0179000 lis3lv02d 20156 1 hp_accel, Live 0xffffffffc0168000 input_polldev 14607 1 lis3lv02d, Live 0xffffffffc0163000 soundcore 15052 1 snd, Live 0xffffffffc015a000 wmi 19193 1 hp_wmi, Live 0xffffffffc0150000 video 20271 0 - Live 0xffffffffc013c000 acpi_cpufreq 19433 0 - Live 0xffffffffc0132000 processor 31458 3 acpi_cpufreq, Live 0xffffffffc0123000 ******************************************************************************** * cmdline ******************************************************************************** automatic=method:cdrom initrd=x86_64/all.rdz automatic=method:cdrom vga=788 splash quiet noiswmd ******************************************************************************** * pcmcia: stab ******************************************************************************** ******************************************************************************** * usb ******************************************************************************** T: Bus=06 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev= 3.19 S: Manufacturer=Linux 3.19.8-desktop-3.mga5 ohci_hcd S: Product=OHCI PCI host controller S: SerialNumber=0000:00:16.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0a5c ProdID=21e3 Rev= 1.12 S: Manufacturer=Broadcom Corp S: Product=BCM20702A0 S: SerialNumber=7CE9D3D599C2 C:* #Ifs= 4 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=ff(vend.) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 32 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 32 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 0 Cls=fe(app. ) Sub=01 Prot=01 Driver=(none) T: Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 5 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev= 3.19 S: Manufacturer=Linux 3.19.8-desktop-3.mga5 ohci_hcd S: Product=OHCI PCI host controller S: SerialNumber=0000:00:13.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 5 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0001 Rev= 3.19 S: Manufacturer=Linux 3.19.8-desktop-3.mga5 ohci_hcd S: Product=OHCI PCI host controller S: SerialNumber=0000:00:12.0 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 4 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev= 3.19 S: Manufacturer=Linux 3.19.8-desktop-3.mga5 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:16.2 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 5 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev= 3.19 S: Manufacturer=Linux 3.19.8-desktop-3.mga5 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:13.2 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0204 ProdID=6025 Rev= 1.00 S: Manufacturer= S: Product=USB0612A S: SerialNumber=345368291401 C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=125us E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 5 B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1d6b ProdID=0002 Rev= 3.19 S: Manufacturer=Linux 3.19.8-desktop-3.mga5 ehci_hcd S: Product=EHCI Host Controller S: SerialNumber=0000:00:12.2 C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=256ms T: Bus=01 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=064e ProdID=d217 Rev= 2.92 S: Manufacturer=SuYin S: Product=HP TrueVision HD S: SerialNumber=HF1016-A821-OV03-VH-R02.09.02 C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=0e(video) Sub=03 Prot=00 I:* If#= 0 Alt= 0 #EPs= 1 Cls=0e(video) Sub=01 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=8ms I:* If#= 1 Alt= 0 #EPs= 0 Cls=0e(video) Sub=02 Prot=00 Driver=(none) I: If#= 1 Alt= 1 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=(none) E: Ad=82(I) Atr=05(Isoc) MxPS=3072 Ivl=125us I: If#= 1 Alt= 2 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=(none) E: Ad=82(I) Atr=05(Isoc) MxPS=2048 Ivl=125us I: If#= 1 Alt= 3 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=(none) E: Ad=82(I) Atr=05(Isoc) MxPS=1024 Ivl=125us I: If#= 1 Alt= 4 #EPs= 1 Cls=0e(video) Sub=02 Prot=00 Driver=(none) E: Ad=82(I) Atr=05(Isoc) MxPS= 512 Ivl=125us ******************************************************************************** * partitions ******************************************************************************** major minor #blocks name 8 0 488386584 sda 8 1 203776 sda1 8 2 256007852 sda2 8 3 24563381 sda3 8 4 1 sda4 8 5 6342 sda5 8 6 70442 sda6 8 7 5830357 sda7 8 8 16987415 sda8 8 9 6480458 sda9 8 10 178223648 sda10 7 0 55540 loop0 8 16 251903 sdb 8 17 251887 sdb1 ******************************************************************************** * cpuinfo ******************************************************************************** processor : 0 vendor_id : AuthenticAMD cpu family : 20 model : 2 model name : AMD E-450 APU with Radeon(tm) HD Graphics stepping : 0 microcode : 0x5000101 cpu MHz : 1650.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni monitor ssse3 cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch ibs skinit wdt arat hw_pstate npt lbrv svm_lock nrip_save pausefilter vmmcall bugs : fxsave_leak bogomips : 3292.93 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate processor : 1 vendor_id : AuthenticAMD cpu family : 20 model : 2 model name : AMD E-450 APU with Radeon(tm) HD Graphics stepping : 0 microcode : 0x5000101 cpu MHz : 1650.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf pni monitor ssse3 cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch ibs skinit wdt arat hw_pstate npt lbrv svm_lock nrip_save pausefilter vmmcall bugs : fxsave_leak bogomips : 3292.93 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate ******************************************************************************** * syslog ******************************************************************************** ] kernel/system logger ok <6>[ 0.000000] Initializing cgroup subsys cpuset <6>[ 0.000000] Initializing cgroup subsys cpu <6>[ 0.000000] Initializing cgroup subsys cpuacct <5>[ 0.000000] Linux version 3.19.8-desktop-3.mga5 (iurt@ecosse.mageia.org) (gcc version 4.9.2 (GCC) ) #1 SMP Sat Jun 13 17:05:48 UTC 2015 <6>[ 0.000000] Command line: automatic=method:cdrom initrd=x86_64/all.rdz automatic=method:cdrom vga=788 splash quiet noiswmd <7>[ 0.000000] tseg: 00dfc00000 <6>[ 0.000000] e820: BIOS-provided physical RAM map: <6>[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable <6>[ 0.000000] BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000df9befff] usable <6>[ 0.000000] BIOS-e820: [mem 0x00000000df9bf000-0x00000000dfabefff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000dfabf000-0x00000000dfbbefff] ACPI NVS <6>[ 0.000000] BIOS-e820: [mem 0x00000000dfbbf000-0x00000000dfbf4fff] ACPI data <6>[ 0.000000] BIOS-e820: [mem 0x00000000dfbf5000-0x00000000dfbfffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x00000000dfc00000-0x00000000dfffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved <6>[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000106ffffff] usable <6>[ 0.000000] BIOS-e820: [mem 0x0000000107000000-0x000000011effffff] reserved <6>[ 0.000000] NX (Execute Disable) protection: active <6>[ 0.000000] SMBIOS 2.7 present. <7>[ 0.000000] DMI: Hewlett-Packard HP Pavilion dm1 Notebook PC/3387, BIOS F.13 12/13/2011 <7>[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved <7>[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable <6>[ 0.000000] AGP: No AGP bridge found <6>[ 0.000000] e820: last_pfn = 0x107000 max_arch_pfn = 0x400000000 <7>[ 0.000000] MTRR default type: uncachable <7>[ 0.000000] MTRR fixed ranges enabled: <7>[ 0.000000] 00000-9FFFF write-back <7>[ 0.000000] A0000-BFFFF uncachable <7>[ 0.000000] C0000-FFFFF write-through <7>[ 0.000000] MTRR variable ranges enabled: <7>[ 0.000000] 0 base 000000000 mask F80000000 write-back <7>[ 0.000000] 1 base 080000000 mask FC0000000 write-back <7>[ 0.000000] 2 base 0C0000000 mask FE0000000 write-back <7>[ 0.000000] 3 base 0DFBBD000 mask FFFFFF000 uncachable <7>[ 0.000000] 4 base 0FFE00000 mask FFFE00000 write-protect <7>[ 0.000000] 5 disabled <7>[ 0.000000] 6 disabled <7>[ 0.000000] 7 disabled <7>[ 0.000000] TOM2: 000000011f000000 aka 4592M <6>[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC <6>[ 0.000000] e820: last_pfn = 0xdfc00 max_arch_pfn = 0x400000000 <6>[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0] <7>[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 <6>[ 0.000000] Using GB pages for direct mapping <6>[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff] <7>[ 0.000000] [mem 0x00000000-0x000fffff] page 4k <7>[ 0.000000] BRK [0x01f2e000, 0x01f2efff] PGTABLE <7>[ 0.000000] BRK [0x01f2f000, 0x01f2ffff] PGTABLE <7>[ 0.000000] BRK [0x01f30000, 0x01f30fff] PGTABLE <6>[ 0.000000] init_memory_mapping: [mem 0x106e00000-0x106ffffff] <7>[ 0.000000] [mem 0x106e00000-0x106ffffff] page 2M <7>[ 0.000000] BRK [0x01f31000, 0x01f31fff] PGTABLE <6>[ 0.000000] init_memory_mapping: [mem 0x100000000-0x106dfffff] <7>[ 0.000000] [mem 0x100000000-0x106dfffff] page 2M <6>[ 0.000000] init_memory_mapping: [mem 0xc0000000-0xdf9befff] <7>[ 0.000000] [mem 0xc0000000-0xdf7fffff] page 2M <7>[ 0.000000] [mem 0xdf800000-0xdf9befff] page 4k <7>[ 0.000000] BRK [0x01f32000, 0x01f32fff] PGTABLE <7>[ 0.000000] BRK [0x01f33000, 0x01f33fff] PGTABLE <6>[ 0.000000] init_memory_mapping: [mem 0xdfbf5000-0xdfbfffff] <7>[ 0.000000] [mem 0xdfbf5000-0xdfbfffff] page 4k <6>[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfffffff] <7>[ 0.000000] [mem 0x00100000-0x001fffff] page 4k <7>[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M <7>[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G <6>[ 0.000000] RAMDISK: [mem 0x7e690000-0x7fffffff] <6>[ 0.000000] ACPI: Early table checksum verification disabled <4>[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HPQOEM) <4>[ 0.000000] ACPI: XSDT 0x00000000DFBF4120 00007C (v01 HPQOEM SLIC-MPC 00000001 01000013) <4>[ 0.000000] ACPI: FACP 0x00000000DFBF3000 0000F4 (v04 HPQOEM SLIC-MPC 00000001 ACPI 00040000) <4>[ 0.000000] ACPI: DSDT 0x00000000DFBDF000 00F4C8 (v01 HP INSYDE F0000000 ACPI 00040000) <4>[ 0.000000] ACPI: FACS 0x00000000DFB86000 000040 <4>[ 0.000000] ACPI: HPET 0x00000000DFBF2000 000038 (v01 HP INSYDE 00000001 ACPI 00040000) <4>[ 0.000000] ACPI: APIC 0x00000000DFBF1000 000084 (v02 HP INSYDE 00000001 ACPI 00040000) <4>[ 0.000000] ACPI: MCFG 0x00000000DFBF0000 00003C (v01 HP INSYDE 00000001 ACPI 00040000) <4>[ 0.000000] ACPI: ASF! 0x00000000DFBEF000 0000A5 (v32 HP INSYDE 00000001 ACPI 00040000) <4>[ 0.000000] ACPI: BOOT 0x00000000DFBDE000 000028 (v01 HP INSYDE 00000001 ACPI 00040000) <4>[ 0.000000] ACPI: SLIC 0x00000000DFBDD000 000176 (v01 HPQOEM SLIC-MPC 00000001 ACPI 00040000) <4>[ 0.000000] ACPI: WDRT 0x00000000DFBDC000 000047 (v01 HP INSYDE 00000000 ACPI 00040000) <4>[ 0.000000] ACPI: WDAT 0x00000000DFBDB000 0001AC (v01 HP INSYDE 00000001 ACPI 00040000) <4>[ 0.000000] ACPI: SSDT 0x00000000DFBDA000 0003DE (v01 HP INSYDE 00000001 AMD 00000001) <4>[ 0.000000] ACPI: SSDT 0x00000000DFBD8000 00168E (v02 HP INSYDE 00000001 MSFT 04000000) <7>[ 0.000000] ACPI: Local APIC address 0xfee00000 <6>[ 0.000000] No NUMA configuration found <6>[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000106ffffff] <6>[ 0.000000] NODE_DATA(0) allocated [mem 0x106ffa000-0x106ffefff] <7>[ 0.000000] [ffffea0000000000-ffffea00041fffff] PMD -> [ffff880102c00000-ffff8801065fffff] on node 0 <6>[ 0.000000] Zone ranges: <6>[ 0.000000] DMA [mem 0x00001000-0x00ffffff] <6>[ 0.000000] DMA32 [mem 0x01000000-0xffffffff] <6>[ 0.000000] Normal [mem 0x100000000-0x106ffffff] <6>[ 0.000000] Movable zone start for each node <6>[ 0.000000] Early memory node ranges <6>[ 0.000000] node 0: [mem 0x00001000-0x0009efff] <6>[ 0.000000] node 0: [mem 0x00100000-0xdf9befff] <6>[ 0.000000] node 0: [mem 0xdfbf5000-0xdfbfffff] <6>[ 0.000000] node 0: [mem 0x100000000-0x106ffffff] <6>[ 0.000000] Initmem setup node 0 [mem 0x00001000-0x106ffffff] <7>[ 0.000000] On node 0 totalpages: 944488 <7>[ 0.000000] DMA zone: 64 pages used for memmap <7>[ 0.000000] DMA zone: 21 pages reserved <7>[ 0.000000] DMA zone: 3998 pages, LIFO batch:0 <7>[ 0.000000] DMA32 zone: 14248 pages used for memmap <7>[ 0.000000] DMA32 zone: 911818 pages, LIFO batch:31 <7>[ 0.000000] Normal zone: 448 pages used for memmap <7>[ 0.000000] Normal zone: 28672 pages, LIFO batch:7 <6>[ 0.000000] ACPI: PM-Timer IO Port: 0x408 <7>[ 0.000000] ACPI: Local APIC address 0xfee00000 <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) <6>[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) <6>[ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23 <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) <6>[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) <7>[ 0.000000] ACPI: IRQ0 used by override. <7>[ 0.000000] ACPI: IRQ9 used by override. <6>[ 0.000000] Using ACPI (MADT) for SMP configuration information <6>[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 <6>[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs <6>[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0xdf9bf000-0xdfabefff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0xdfabf000-0xdfbbefff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0xdfbbf000-0xdfbf4fff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0xdfc00000-0xdfffffff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfedfffff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff] <6>[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff] <6>[ 0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices <6>[ 0.000000] Booting paravirtualized kernel on bare hardware <6>[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1 <6>[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880106c00000 s84864 r8192 d29824 u524288 <7>[ 0.000000] pcpu-alloc: s84864 r8192 d29824 u524288 alloc=1*2097152 <7>[ 0.000000] pcpu-alloc: [0] 0 1 2 3 <6>[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 929707 <6>[ 0.000000] Policy zone: Normal <5>[ 0.000000] Kernel command line: automatic=method:cdrom initrd=x86_64/all.rdz automatic=method:cdrom vga=788 splash quiet noiswmd <6>[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) <6>[ 0.000000] AGP: Checking aperture... <6>[ 0.000000] AGP: No AGP bridge found <7>[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area <7>[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! <6>[ 0.000000] Memory: 3610052K/3777952K available (6962K kernel code, 1089K rwdata, 3444K rodata, 1312K init, 816K bss, 167900K reserved, 0K cma-reserved) <6>[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 <6>[ 0.000000] Hierarchical RCU implementation. <6>[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4. <6>[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 <6>[ 0.000000] NR_IRQS:4352 nr_irqs:456 16 <6>[ 0.000000] Console: colour dummy device 80x25 <6>[ 0.000000] console [tty0] enabled <7>[ 0.000000] hpet clockevent registered <6>[ 0.000000] tsc: Fast TSC calibration using PIT <6>[ 0.000000] tsc: Detected 1646.468 MHz processor <6>[ 0.000058] Calibrating delay loop (skipped), value calculated using timer frequency.. 3292.93 BogoMIPS (lpj=1646468) <6>[ 0.000065] pid_max: default: 32768 minimum: 301 <6>[ 0.000081] ACPI: Core revision 20141107 <4>[ 0.020778] ACPI: All ACPI Tables successfully acquired <6>[ 0.023624] Security Framework initialized <6>[ 0.023643] TOMOYO Linux initialized <6>[ 0.024232] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) <6>[ 0.026985] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) <6>[ 0.028300] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes) <6>[ 0.028318] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes) <6>[ 0.028821] Initializing cgroup subsys devices <6>[ 0.028833] Initializing cgroup subsys freezer <6>[ 0.028840] Initializing cgroup subsys net_cls <6>[ 0.028845] Initializing cgroup subsys blkio <6>[ 0.028891] CPU: Physical Processor ID: 0 <6>[ 0.028894] CPU: Processor Core ID: 0 <6>[ 0.028897] mce: CPU supports 6 MCE banks <6>[ 0.028913] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4 <6>[ 0.028913] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4, 1GB 0 <6>[ 0.029143] Freeing SMP alternatives memory: 24K (ffffffff81e5a000 - ffffffff81e60000) <6>[ 0.031287] ftrace: allocating 25868 entries in 102 pages <6>[ 1.068049] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 <6>[ 1.078062] smpboot: CPU0: AMD E-450 APU with Radeon(tm) HD Graphics (fam: 14, model: 02, stepping: 00) <6>[ 1.179379] Performance Events: AMD PMU driver. <6>[ 1.179388] ... version: 0 <6>[ 1.179391] ... bit width: 48 <6>[ 1.179393] ... generic registers: 4 <6>[ 1.179395] ... value mask: 0000ffffffffffff <6>[ 1.179398] ... max period: 00007fffffffffff <6>[ 1.179400] ... fixed-purpose events: 0 <6>[ 1.179402] ... event mask: 000000000000000f <6>[ 1.180323] MCE: In-kernel MCE decoding enabled. <6>[ 1.180599] x86: Booting SMP configuration: <6>[ 1.180605] .... node #0, CPUs: #1 <6>[ 1.193859] x86: Booted up 1 node, 2 CPUs <6>[ 1.193865] smpboot: Total of 2 processors activated (6585.87 BogoMIPS) <6>[ 1.194659] devtmpfs: initialized <6>[ 1.203554] PM: Registering ACPI NVS region [mem 0xdfabf000-0xdfbbefff] (1048576 bytes) <6>[ 1.203860] xor: measuring software checksum speed <6>[ 1.213353] prefetch64-sse: 3540.000 MB/sec <6>[ 1.223354] generic_sse: 3308.000 MB/sec <6>[ 1.223357] xor: using function: prefetch64-sse (3540.000 MB/sec) <6>[ 1.223371] pinctrl core: initialized pinctrl subsystem <6>[ 1.223625] RTC time: 9:54:02, date: 07/19/15 <6>[ 1.223864] NET: Registered protocol family 16 <6>[ 1.228401] cpuidle: using governor ladder <6>[ 1.234369] cpuidle: using governor menu <6>[ 1.234649] ACPI: bus type PCI registered <6>[ 1.234653] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 <6>[ 1.234932] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000) <6>[ 1.234938] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820 <6>[ 1.235181] PCI: Using configuration type 1 for base access <6>[ 1.259375] raid6: sse2x1 1289 MB/s <6>[ 1.276375] raid6: sse2x2 1570 MB/s <6>[ 1.293394] raid6: sse2x4 2320 MB/s <6>[ 1.293397] raid6: using algorithm sse2x4 (2320 MB/s) <6>[ 1.293400] raid6: using ssse3x2 recovery algorithm <6>[ 1.293622] ACPI: Added _OSI(Module Device) <6>[ 1.293626] ACPI: Added _OSI(Processor Device) <6>[ 1.293629] ACPI: Added _OSI(3.0 _SCP Extensions) <6>[ 1.293631] ACPI: Added _OSI(Processor Aggregator Device) <4>[ 1.298783] ACPI: Executed 1 blocks of module-level executable AML code <6>[ 1.400465] ACPI: Interpreter enabled <4>[ 1.400505] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20141107/hwxface-580) <4>[ 1.400515] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20141107/hwxface-580) <6>[ 1.400550] ACPI: (supports S0 S3 S4 S5) <6>[ 1.400554] ACPI: Using IOAPIC for interrupt routing <6>[ 1.400912] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug <6>[ 1.816985] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) <6>[ 1.817003] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] <6>[ 1.817466] acpi PNP0A08:00: _OSC: platform does not support [PME] <6>[ 1.817790] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug AER PCIeCapability] <6>[ 1.818068] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000ce3ff]) <6>[ 1.818082] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge <6>[ 1.818345] PCI host bridge to bus 0000:00 <6>[ 1.818351] pci_bus 0000:00: root bus resource [bus 00-ff] <6>[ 1.818355] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] <6>[ 1.818359] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] <6>[ 1.818363] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] <6>[ 1.818367] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff] <6>[ 1.818371] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff] <6>[ 1.818375] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff] <6>[ 1.818378] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff] <6>[ 1.818382] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff] <6>[ 1.818385] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff] <6>[ 1.818389] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff] <6>[ 1.818392] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff] <6>[ 1.818396] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff] <6>[ 1.818400] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff] <6>[ 1.818403] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff] <6>[ 1.818408] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf7ffffff] <6>[ 1.818411] pci_bus 0000:00: root bus resource [mem 0xfc000000-0xfed3ffff] <6>[ 1.818415] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xffffffff] <7>[ 1.818430] pci 0000:00:00.0: [1022:1510] type 00 class 0x060000 <7>[ 1.818614] pci 0000:00:01.0: [1002:9806] type 00 class 0x030000 <7>[ 1.818632] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff pref] <7>[ 1.818643] pci 0000:00:01.0: reg 0x14: [io 0x4000-0x40ff] <7>[ 1.818653] pci 0000:00:01.0: reg 0x18: [mem 0xf0300000-0xf033ffff] <7>[ 1.818724] pci 0000:00:01.0: supports D1 D2 <7>[ 1.818870] pci 0000:00:01.1: [1002:1314] type 00 class 0x040300 <7>[ 1.818886] pci 0000:00:01.1: reg 0x10: [mem 0xf0344000-0xf0347fff] <7>[ 1.818967] pci 0000:00:01.1: supports D1 D2 <7>[ 1.819143] pci 0000:00:04.0: [1022:1512] type 01 class 0x060400 <7>[ 1.819238] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold <7>[ 1.819463] pci 0000:00:11.0: [1002:4394] type 00 class 0x010601 <7>[ 1.819491] pci 0000:00:11.0: reg 0x10: [io 0x4118-0x411f] <7>[ 1.819505] pci 0000:00:11.0: reg 0x14: [io 0x4124-0x4127] <7>[ 1.819519] pci 0000:00:11.0: reg 0x18: [io 0x4110-0x4117] <7>[ 1.819533] pci 0000:00:11.0: reg 0x1c: [io 0x4120-0x4123] <7>[ 1.819548] pci 0000:00:11.0: reg 0x20: [io 0x4100-0x410f] <7>[ 1.819562] pci 0000:00:11.0: reg 0x24: [mem 0xf034e000-0xf034e3ff] <7>[ 1.819802] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310 <7>[ 1.819823] pci 0000:00:12.0: reg 0x10: [mem 0xf034d000-0xf034dfff] <6>[ 1.819979] pci 0000:00:12.0: System wakeup disabled by ACPI <7>[ 1.820116] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320 <7>[ 1.820639] pci 0000:00:12.2: reg 0x10: [mem 0xf034c000-0xf034c0ff] <7>[ 1.823525] pci 0000:00:12.2: supports D1 D2 <7>[ 1.823529] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot <6>[ 1.823618] pci 0000:00:12.2: System wakeup disabled by ACPI <7>[ 1.823730] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310 <7>[ 1.823751] pci 0000:00:13.0: reg 0x10: [mem 0xf034b000-0xf034bfff] <6>[ 1.823903] pci 0000:00:13.0: System wakeup disabled by ACPI <7>[ 1.824058] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320 <7>[ 1.824550] pci 0000:00:13.2: reg 0x10: [mem 0xf034a000-0xf034a0ff] <7>[ 1.827433] pci 0000:00:13.2: supports D1 D2 <7>[ 1.827437] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot <6>[ 1.827521] pci 0000:00:13.2: System wakeup disabled by ACPI <7>[ 1.827675] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500 <7>[ 1.827971] pci 0000:00:14.2: [1002:4383] type 00 class 0x040300 <7>[ 1.828003] pci 0000:00:14.2: reg 0x10: [mem 0xf0340000-0xf0343fff 64bit] <7>[ 1.828103] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold <7>[ 1.828320] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100 <7>[ 1.828611] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401 <6>[ 1.828735] pci 0000:00:14.4: System wakeup disabled by ACPI <7>[ 1.828838] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400 <7>[ 1.828957] pci 0000:00:15.0: supports D1 D2 <6>[ 1.829046] pci 0000:00:15.0: System wakeup disabled by ACPI <7>[ 1.829144] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400 <7>[ 1.829261] pci 0000:00:15.1: supports D1 D2 <6>[ 1.829365] pci 0000:00:15.1: System wakeup disabled by ACPI <7>[ 1.829450] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310 <7>[ 1.829471] pci 0000:00:16.0: reg 0x10: [mem 0xf0349000-0xf0349fff] <7>[ 1.829727] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320 <7>[ 1.830239] pci 0000:00:16.2: reg 0x10: [mem 0xf0348000-0xf03480ff] <7>[ 1.833113] pci 0000:00:16.2: supports D1 D2 <7>[ 1.833117] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot <7>[ 1.833346] pci 0000:00:18.0: [1022:1700] type 00 class 0x060000 <7>[ 1.833511] pci 0000:00:18.1: [1022:1701] type 00 class 0x060000 <7>[ 1.833668] pci 0000:00:18.2: [1022:1702] type 00 class 0x060000 <7>[ 1.833825] pci 0000:00:18.3: [1022:1703] type 00 class 0x060000 <7>[ 1.833996] pci 0000:00:18.4: [1022:1704] type 00 class 0x060000 <7>[ 1.834160] pci 0000:00:18.5: [1022:1718] type 00 class 0x060000 <7>[ 1.834318] pci 0000:00:18.6: [1022:1716] type 00 class 0x060000 <7>[ 1.834478] pci 0000:00:18.7: [1022:1719] type 00 class 0x060000 <6>[ 1.834833] pci 0000:00:04.0: PCI bridge to [bus 01] <6>[ 1.834957] pci 0000:00:14.4: PCI bridge to [bus 02] (subtractive decode) <7>[ 1.834971] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) <7>[ 1.834975] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) <7>[ 1.834979] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) <7>[ 1.834983] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode) <7>[ 1.834987] pci 0000:00:14.4: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode) <7>[ 1.834990] pci 0000:00:14.4: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode) <7>[ 1.834994] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode) <7>[ 1.834998] pci 0000:00:14.4: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode) <7>[ 1.835002] pci 0000:00:14.4: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode) <7>[ 1.835006] pci 0000:00:14.4: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode) <7>[ 1.835010] pci 0000:00:14.4: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode) <7>[ 1.835014] pci 0000:00:14.4: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode) <7>[ 1.835017] pci 0000:00:14.4: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode) <7>[ 1.835021] pci 0000:00:14.4: bridge window [mem 0x000ec000-0x000effff] (subtractive decode) <7>[ 1.835025] pci 0000:00:14.4: bridge window [mem 0xe0000000-0xf7ffffff] (subtractive decode) <7>[ 1.835029] pci 0000:00:14.4: bridge window [mem 0xfc000000-0xfed3ffff] (subtractive decode) <7>[ 1.835033] pci 0000:00:14.4: bridge window [mem 0xfed45000-0xffffffff] (subtractive decode) <7>[ 1.835242] pci 0000:03:00.0: [14e4:4727] type 00 class 0x028000 <7>[ 1.835282] pci 0000:03:00.0: reg 0x10: [mem 0xf0200000-0xf0203fff 64bit] <7>[ 1.835480] pci 0000:03:00.0: supports D1 D2 <6>[ 1.838169] pci 0000:00:15.0: PCI bridge to [bus 03-06] <7>[ 1.838196] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff] <7>[ 1.838210] pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf02fffff] <7>[ 1.838226] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] <7>[ 1.838476] pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000 <7>[ 1.838509] pci 0000:07:00.0: reg 0x10: [io 0x2000-0x20ff] <7>[ 1.838551] pci 0000:07:00.0: reg 0x18: [mem 0xf0104000-0xf0104fff 64bit pref] <7>[ 1.838578] pci 0000:07:00.0: reg 0x20: [mem 0xf0100000-0xf0103fff 64bit pref] <7>[ 1.838727] pci 0000:07:00.0: supports D1 D2 <7>[ 1.838731] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold <6>[ 1.841149] pci 0000:00:15.1: PCI bridge to [bus 07] <7>[ 1.841165] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff] <7>[ 1.841184] pci 0000:00:15.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref] <6>[ 1.843199] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 11 12 14 15) *0 <6>[ 1.843339] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 15) *0 <6>[ 1.843477] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 10 11 12 14 15) *0 <6>[ 1.843614] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 10 11 12 14 15) *0 <6>[ 1.843728] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0 <6>[ 1.843821] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 12 14 15) *0 <6>[ 1.843913] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 12 14 15) *0 <6>[ 1.844006] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0 <4>[ 2.046093] ACPI: Enabled 2 GPEs in block 00 to 1F <6>[ 2.046224] ACPI : EC: GPE = 0x5, I/O: command/status = 0x66, data = 0x62 <6>[ 2.046569] vgaarb: setting as boot device: PCI:0000:00:01.0 <6>[ 2.046578] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none <6>[ 2.046591] vgaarb: loaded <6>[ 2.046594] vgaarb: bridge control possible 0000:00:01.0 <5>[ 2.047110] SCSI subsystem initialized <7>[ 2.047347] libata version 3.00 loaded. <6>[ 2.047817] PCI: Using ACPI for IRQ routing <7>[ 2.050663] PCI: pci_cache_line_size set to 64 bytes <7>[ 2.050774] e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff] <7>[ 2.050778] e820: reserve RAM buffer [mem 0xdf9bf000-0xdfffffff] <7>[ 2.050782] e820: reserve RAM buffer [mem 0xdfc00000-0xdfffffff] <7>[ 2.050784] e820: reserve RAM buffer [mem 0x107000000-0x107ffffff] <6>[ 2.051040] NetLabel: Initializing <6>[ 2.051043] NetLabel: domain hash size = 128 <6>[ 2.051045] NetLabel: protocols = UNLABELED CIPSOv4 <6>[ 2.051071] NetLabel: unlabeled traffic allowed by default <6>[ 2.051159] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 <6>[ 2.051167] hpet0: 3 comparators, 32-bit 14.318180 MHz counter <6>[ 2.053236] Switched to clocksource hpet <6>[ 2.066986] pnp: PnP ACPI init <6>[ 2.067317] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved <6>[ 2.067323] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved <7>[ 2.067331] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active) <7>[ 2.067730] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active) <7>[ 2.067842] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active) <7>[ 2.067986] pnp 00:03: Plug and Play ACPI device, IDs SYN1e50 PNP0f13 (active) <6>[ 2.068099] system 00:04: [io 0x0400-0x04cf] could not be reserved <6>[ 2.068105] system 00:04: [io 0x04d0-0x04d1] has been reserved <6>[ 2.068109] system 00:04: [io 0x04d6] has been reserved <6>[ 2.068113] system 00:04: [io 0x0680-0x06ff] has been reserved <6>[ 2.068117] system 00:04: [io 0x077a] has been reserved <6>[ 2.068122] system 00:04: [io 0x0c00-0x0c01] has been reserved <6>[ 2.068126] system 00:04: [io 0x0c14] has been reserved <6>[ 2.068130] system 00:04: [io 0x0c50-0x0c52] has been reserved <6>[ 2.068133] system 00:04: [io 0x0c6c] has been reserved <6>[ 2.068137] system 00:04: [io 0x0c6f] has been reserved <6>[ 2.068141] system 00:04: [io 0x0cd0-0x0cdb] has been reserved <6>[ 2.068145] system 00:04: [io 0x0380-0x0387] has been reserved <7>[ 2.068151] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active) <6>[ 2.068322] system 00:05: [mem 0x000e0000-0x000fffff] could not be reserved <6>[ 2.068327] system 00:05: [mem 0xffe00000-0xffffffff] has been reserved <7>[ 2.068333] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active) <6>[ 2.270418] pnp: PnP ACPI: found 6 devices <7>[ 2.282028] pci 0000:00:04.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000 <7>[ 2.282040] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 <7>[ 2.282046] pci 0000:00:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 <7>[ 2.282155] pci 0000:00:04.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000 <7>[ 2.282160] pci 0000:00:04.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000 <7>[ 2.282165] pci 0000:00:04.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000 <6>[ 2.282182] pci 0000:00:04.0: BAR 14: assigned [mem 0xf0400000-0xf05fffff] <6>[ 2.282206] pci 0000:00:04.0: BAR 15: assigned [mem 0xf0600000-0xf07fffff 64bit pref] <6>[ 2.282213] pci 0000:00:04.0: BAR 13: assigned [io 0x1000-0x1fff] <6>[ 2.282218] pci 0000:00:04.0: PCI bridge to [bus 01] <6>[ 2.282223] pci 0000:00:04.0: bridge window [io 0x1000-0x1fff] <6>[ 2.282231] pci 0000:00:04.0: bridge window [mem 0xf0400000-0xf05fffff] <6>[ 2.282237] pci 0000:00:04.0: bridge window [mem 0xf0600000-0xf07fffff 64bit pref] <6>[ 2.282244] pci 0000:00:14.4: PCI bridge to [bus 02] <6>[ 2.282302] pci 0000:00:15.0: PCI bridge to [bus 03-06] <6>[ 2.282308] pci 0000:00:15.0: bridge window [io 0x3000-0x3fff] <6>[ 2.282316] pci 0000:00:15.0: bridge window [mem 0xf0200000-0xf02fffff] <6>[ 2.282322] pci 0000:00:15.0: bridge window [mem 0xf0000000-0xf00fffff 64bit pref] <6>[ 2.282332] pci 0000:00:15.1: PCI bridge to [bus 07] <6>[ 2.282337] pci 0000:00:15.1: bridge window [io 0x2000-0x2fff] <6>[ 2.282348] pci 0000:00:15.1: bridge window [mem 0xf0100000-0xf01fffff 64bit pref] <7>[ 2.282358] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] <7>[ 2.282362] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] <7>[ 2.282365] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] <7>[ 2.282369] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff] <7>[ 2.282373] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff] <7>[ 2.282376] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff] <7>[ 2.282380] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff] <7>[ 2.282384] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff] <7>[ 2.282387] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff] <7>[ 2.282391] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff] <7>[ 2.282394] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff] <7>[ 2.282398] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff] <7>[ 2.282401] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff] <7>[ 2.282405] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff] <7>[ 2.282408] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff] <7>[ 2.282412] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff] <7>[ 2.282416] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff] <7>[ 2.282420] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff] <7>[ 2.282423] pci_bus 0000:01: resource 1 [mem 0xf0400000-0xf05fffff] <7>[ 2.282427] pci_bus 0000:01: resource 2 [mem 0xf0600000-0xf07fffff 64bit pref] <7>[ 2.282431] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7] <7>[ 2.282435] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff] <7>[ 2.282438] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff] <7>[ 2.282442] pci_bus 0000:02: resource 7 [mem 0x000c0000-0x000c3fff] <7>[ 2.282446] pci_bus 0000:02: resource 8 [mem 0x000c4000-0x000c7fff] <7>[ 2.282449] pci_bus 0000:02: resource 9 [mem 0x000c8000-0x000cbfff] <7>[ 2.282453] pci_bus 0000:02: resource 10 [mem 0x000d0000-0x000d3fff] <7>[ 2.282456] pci_bus 0000:02: resource 11 [mem 0x000d4000-0x000d7fff] <7>[ 2.282460] pci_bus 0000:02: resource 12 [mem 0x000d8000-0x000dbfff] <7>[ 2.282463] pci_bus 0000:02: resource 13 [mem 0x000dc000-0x000dffff] <7>[ 2.282467] pci_bus 0000:02: resource 14 [mem 0x000e0000-0x000e3fff] <7>[ 2.282470] pci_bus 0000:02: resource 15 [mem 0x000e4000-0x000e7fff] <7>[ 2.282474] pci_bus 0000:02: resource 16 [mem 0x000e8000-0x000ebfff] <7>[ 2.282477] pci_bus 0000:02: resource 17 [mem 0x000ec000-0x000effff] <7>[ 2.282481] pci_bus 0000:02: resource 18 [mem 0xe0000000-0xf7ffffff] <7>[ 2.282484] pci_bus 0000:02: resource 19 [mem 0xfc000000-0xfed3ffff] <7>[ 2.282488] pci_bus 0000:02: resource 20 [mem 0xfed45000-0xffffffff] <7>[ 2.282492] pci_bus 0000:03: resource 0 [io 0x3000-0x3fff] <7>[ 2.282495] pci_bus 0000:03: resource 1 [mem 0xf0200000-0xf02fffff] <7>[ 2.282500] pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref] <7>[ 2.282504] pci_bus 0000:07: resource 0 [io 0x2000-0x2fff] <7>[ 2.282508] pci_bus 0000:07: resource 2 [mem 0xf0100000-0xf01fffff 64bit pref] <6>[ 2.282571] NET: Registered protocol family 2 <6>[ 2.282973] TCP established hash table entries: 32768 (order: 6, 262144 bytes) <6>[ 2.283162] TCP bind hash table entries: 32768 (order: 7, 524288 bytes) <6>[ 2.283465] TCP: Hash tables configured (established 32768 bind 32768) <6>[ 2.283563] TCP: reno registered <6>[ 2.283589] UDP hash table entries: 2048 (order: 4, 65536 bytes) <6>[ 2.283641] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) <6>[ 2.283815] NET: Registered protocol family 1 <7>[ 2.283854] pci 0000:00:01.0: Video device with shadowed ROM <7>[ 3.022993] PCI: CLS 64 bytes, default 64 <6>[ 3.023119] Trying to unpack rootfs image as initramfs... <6>[ 5.659912] Freeing initrd memory: 26048K (ffff88007e690000 - ffff880080000000) <6>[ 5.659936] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) <6>[ 5.659942] software IO TLB [mem 0xdb9bf000-0xdf9bf000] (64MB) mapped at [ffff8800db9bf000-ffff8800df9befff] <6>[ 5.660080] Simple Boot Flag at 0x44 set to 0x1 <6>[ 5.660391] LVT offset 0 assigned for vector 0x400 <6>[ 5.660521] perf: AMD IBS detected (0x000000ff) <6>[ 5.661476] futex hash table entries: 1024 (order: 4, 65536 bytes) <6>[ 5.661549] audit: initializing netlink subsys (disabled) <5>[ 5.661584] audit: type=2000 audit(1437299645.532:1): initialized <6>[ 5.662630] HugeTLB registered 2 MB page size, pre-allocated 0 pages <6>[ 5.666207] zpool: loaded <6>[ 5.666212] zbud: loaded <5>[ 5.666636] VFS: Disk quotas dquot_6.5.2 <6>[ 5.666829] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) <6>[ 5.668728] bounce: pool size: 64 pages <6>[ 5.668844] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) <6>[ 5.669034] io scheduler noop registered <6>[ 5.669046] io scheduler deadline registered <6>[ 5.669157] io scheduler cfq registered (default) <6>[ 5.670224] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 <6>[ 5.670349] pciehp 0000:00:04.0:pcie04: Slot #4 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+ <7>[ 5.670457] pciehp 0000:00:04.0:pcie04: service driver pciehp loaded <6>[ 5.670469] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 <6>[ 5.670584] vesafb: mode is 800x600x16, linelength=1600, pages=16 <6>[ 5.670587] vesafb: scrolling: redraw <6>[ 5.670591] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 <6>[ 5.670616] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004780000, using 1875k, total 16384k <6>[ 5.689760] Console: switching to colour frame buffer device 100x37 <6>[ 5.708423] fb0: VESA VGA frame buffer device <6>[ 5.708513] GHES: HEST is not enabled! <6>[ 5.708757] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled <6>[ 5.710222] Linux agpgart interface v0.103 <6>[ 5.714647] brd: module loaded <7>[ 5.715208] ahci 0000:00:11.0: version 3.0 <6>[ 5.715608] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 6 Gbps 0x1 impl SATA mode <6>[ 5.715616] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part <6>[ 5.716222] scsi host0: ahci <6>[ 5.716507] ata1: SATA max UDMA/133 abar m1024@0xf034e000 port 0xf034e100 irq 19 <6>[ 5.716730] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 <6>[ 5.720837] serio: i8042 KBD port at 0x60,0x64 irq 1 <6>[ 5.720848] serio: i8042 AUX port at 0x60,0x64 irq 12 <6>[ 5.721281] mousedev: PS/2 mouse device common for all mice <6>[ 5.721615] rtc_cmos 00:01: RTC can wake from S4 <6>[ 5.721961] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 <6>[ 5.722080] rtc_cmos 00:01: alarms up to one month, 114 bytes nvram, hpet irqs <6>[ 5.722131] ledtrig-cpu: registered to indicate activity on CPUs <6>[ 5.722349] TCP: cubic registered <5>[ 5.722373] Key type dns_resolver registered <6>[ 5.722378] mpls_gso: MPLS GSO support <6>[ 5.723612] registered taskstats version 1 <6>[ 5.725063] Btrfs loaded <6>[ 5.725897] Magic number: 7:278:930 <6>[ 5.726108] rtc_cmos 00:01: setting system clock to 2015-07-19 09:54:07 UTC (1437299647) <6>[ 5.726210] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found <7>[ 5.726390] PM: Hibernation image not present or could not be loaded. <6>[ 5.796790] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0 <6>[ 6.177133] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) <6>[ 6.178789] ata1.00: ATA-8: Hitachi HTS545050B9A300, PB4OCA1G, max UDMA/100 <6>[ 6.178799] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA <6>[ 6.180446] ata1.00: configured for UDMA/100 <5>[ 6.180935] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54505 CA1G PQ: 0 ANSI: 5 <5>[ 6.182008] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) <5>[ 6.182300] sd 0:0:0:0: [sda] Write Protect is off <7>[ 6.182310] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 <5>[ 6.182378] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA <6>[ 6.568563] psmouse serio1: synaptics: queried max coordinates: x [..5776], y [..5012] <6>[ 6.585612] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > <5>[ 6.588318] sd 0:0:0:0: [sda] Attached SCSI disk <6>[ 6.589371] Freeing unused kernel memory: 1312K (ffffffff81d12000 - ffffffff81e5a000) <6>[ 6.589380] Write protecting the kernel read-only data: 12288k <6>[ 6.590901] Freeing unused kernel memory: 1220K (ffff8800016cf000 - ffff880001800000) <6>[ 6.591638] Freeing unused kernel memory: 652K (ffff880001b5d000 - ffff880001c00000) <6>[ 6.635326] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400, board id: 1679, fw id: 724542 <6>[ 6.661861] tsc: Refined TSC clocksource calibration: 1646.492 MHz <6>[ 6.676730] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2 <30>[ 6.735432] dracut: dracut-038 <5>[ 6.951927] random: systemd-udevd urandom read with 35 bits of entropy available <7>[ 7.037358] ACPI: acpi_idle registered with cpuidle <6>[ 7.041160] acpi-cpufreq: overriding BIOS provided _PSD data <6>[ 7.059122] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no) <6>[ 7.187155] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 <6>[ 7.187569] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20 <6>[ 7.219391] wmi: Mapper loaded <6>[ 7.231176] bcma: bus0: Found chip with id 0x4313, rev 0x01 and package 0x08 <6>[ 7.231214] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x24, class 0x0) <6>[ 7.231239] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x18, class 0x0) <6>[ 7.231283] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x11, class 0x0) <6>[ 7.237389] acpi device:00: registered as cooling_device2 <6>[ 7.237515] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3 <6>[ 7.237605] hp_accel: laptop model unknown, using default axes configuration <6>[ 7.241660] lis3lv02d: 8 bits 3DC sensor found <6>[ 7.259181] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded <6>[ 7.277081] r8169 0000:07:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000658000, 80:c1:6e:54:b1:81, XID 0c900800 IRQ 25 <6>[ 7.277092] r8169 0000:07:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] <6>[ 7.278058] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input4 <6>[ 7.283083] bcma: bus0: Bus registered <6>[ 7.357189] ACPI: bus type USB registered <6>[ 7.357254] usbcore: registered new interface driver usbfs <6>[ 7.357280] usbcore: registered new interface driver hub <6>[ 7.359978] usbcore: registered new device driver usb <6>[ 7.386268] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver <6>[ 7.387475] ehci-pci: EHCI PCI platform driver <7>[ 7.387818] QUIRK: Enable AMD PLL fix <6>[ 7.387889] ehci-pci 0000:00:12.2: EHCI Host Controller <6>[ 7.387904] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1 <6>[ 7.387916] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround <6>[ 7.388001] ehci-pci 0000:00:12.2: debug port 1 <6>[ 7.388071] ehci-pci 0000:00:12.2: irq 17, io mem 0xf034c000 <6>[ 7.389707] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver <6>[ 7.393952] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00 <6>[ 7.394095] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 7.394100] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.394104] usb usb1: Product: EHCI Host Controller <6>[ 7.394108] usb usb1: Manufacturer: Linux 3.19.8-desktop-3.mga5 ehci_hcd <6>[ 7.394112] usb usb1: SerialNumber: 0000:00:12.2 <6>[ 7.394419] hub 1-0:1.0: USB hub found <6>[ 7.394439] hub 1-0:1.0: 5 ports detected <6>[ 7.395156] ehci-pci 0000:00:13.2: EHCI Host Controller <6>[ 7.395172] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 2 <6>[ 7.395181] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround <6>[ 7.395198] ehci-pci 0000:00:13.2: debug port 1 <6>[ 7.395252] ehci-pci 0000:00:13.2: irq 17, io mem 0xf034a000 <6>[ 7.400951] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00 <6>[ 7.401092] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 7.401097] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.401102] usb usb2: Product: EHCI Host Controller <6>[ 7.401105] usb usb2: Manufacturer: Linux 3.19.8-desktop-3.mga5 ehci_hcd <6>[ 7.401109] usb usb2: SerialNumber: 0000:00:13.2 <6>[ 7.401401] hub 2-0:1.0: USB hub found <6>[ 7.401420] hub 2-0:1.0: 5 ports detected <6>[ 7.402123] ehci-pci 0000:00:16.2: EHCI Host Controller <6>[ 7.402138] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 3 <6>[ 7.402153] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround <6>[ 7.402238] ehci-pci 0000:00:16.2: debug port 1 <6>[ 7.402292] ehci-pci 0000:00:16.2: irq 17, io mem 0xf0348000 <6>[ 7.407962] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00 <6>[ 7.408108] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 <6>[ 7.408113] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.408116] usb usb3: Product: EHCI Host Controller <6>[ 7.408120] usb usb3: Manufacturer: Linux 3.19.8-desktop-3.mga5 ehci_hcd <6>[ 7.408124] usb usb3: SerialNumber: 0000:00:16.2 <6>[ 7.408432] hub 3-0:1.0: USB hub found <6>[ 7.408475] hub 3-0:1.0: 4 ports detected <6>[ 7.410605] ohci-pci: OHCI PCI platform driver <6>[ 7.411823] ohci-pci 0000:00:12.0: OHCI PCI host controller <6>[ 7.411967] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 4 <6>[ 7.412037] ohci-pci 0000:00:12.0: irq 18, io mem 0xf034d000 <6>[ 7.467150] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 <6>[ 7.467160] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.467164] usb usb4: Product: OHCI PCI host controller <6>[ 7.467168] usb usb4: Manufacturer: Linux 3.19.8-desktop-3.mga5 ohci_hcd <6>[ 7.467172] usb usb4: SerialNumber: 0000:00:12.0 <6>[ 7.467512] hub 4-0:1.0: USB hub found <6>[ 7.467601] hub 4-0:1.0: 5 ports detected <6>[ 7.468097] ohci-pci 0000:00:13.0: OHCI PCI host controller <6>[ 7.468111] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 5 <6>[ 7.468162] ohci-pci 0000:00:13.0: irq 18, io mem 0xf034b000 <6>[ 7.523175] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 <6>[ 7.523185] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.523190] usb usb5: Product: OHCI PCI host controller <6>[ 7.523193] usb usb5: Manufacturer: Linux 3.19.8-desktop-3.mga5 ohci_hcd <6>[ 7.523197] usb usb5: SerialNumber: 0000:00:13.0 <6>[ 7.523543] hub 5-0:1.0: USB hub found <6>[ 7.523631] hub 5-0:1.0: 5 ports detected <6>[ 7.524126] ohci-pci 0000:00:16.0: OHCI PCI host controller <6>[ 7.524140] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 6 <6>[ 7.524195] ohci-pci 0000:00:16.0: irq 18, io mem 0xf0349000 <6>[ 7.579529] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 <6>[ 7.579538] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 <6>[ 7.579543] usb usb6: Product: OHCI PCI host controller <6>[ 7.579547] usb usb6: Manufacturer: Linux 3.19.8-desktop-3.mga5 ohci_hcd <6>[ 7.579550] usb usb6: SerialNumber: 0000:00:16.0 <6>[ 7.580158] hub 6-0:1.0: USB hub found <6>[ 7.580246] hub 6-0:1.0: 4 ports detected <5>[ 7.601006] random: nonblocking pool is initialized <6>[ 7.622855] microcode: CPU0: patch_level=0x05000101 <6>[ 7.623053] microcode: CPU1: patch_level=0x05000101 <6>[ 7.623282] microcode: Microcode Update Driver: v2.00 , Peter Oruba <6>[ 7.662216] Switched to clocksource tsc <6>[ 7.696016] usb 1-3: new high-speed USB device number 2 using ehci-pci <6>[ 7.703028] usb 2-1: new high-speed USB device number 2 using ehci-pci <6>[ 7.779419] r8169 0000:07:00.0 eno1: renamed from eth0 <6>[ 7.785547] input: HP WMI hotkeys as /devices/virtual/input/input5 <6>[ 7.821780] usb 2-1: New USB device found, idVendor=0e8d, idProduct=1836 <6>[ 7.821790] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 <6>[ 7.821794] usb 2-1: Product: MT1836 <6>[ 7.821798] usb 2-1: Manufacturer: MediaTek Inc <6>[ 7.821801] usb 2-1: SerialNumber: KG8ACNF0819 <6>[ 7.860360] usb 1-3: New USB device found, idVendor=064e, idProduct=d217 <6>[ 7.860370] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 <6>[ 7.860374] usb 1-3: Product: HP TrueVision HD <6>[ 7.860378] usb 1-3: Manufacturer: SuYin <6>[ 7.860382] usb 1-3: SerialNumber: HF1016-A821-OV03-VH-R02.09.02 <6>[ 7.874253] media: Linux media interface: v0.10 <6>[ 7.886364] cfg80211: Calling CRDA to update world regulatory domain <6>[ 7.886594] usb-storage 2-1:1.0: USB Mass Storage device detected <6>[ 7.888532] Linux video capture interface: v2.00 <6>[ 7.891407] scsi host1: usb-storage 2-1:1.0 <6>[ 7.891624] usbcore: registered new interface driver usb-storage <6>[ 7.903970] usb 6-1: new full-speed USB device number 2 using ohci-pci <6>[ 7.962056] usb 3-4: new high-speed USB device number 3 using ehci-pci <3>[ 7.971368] Support for cores revisions 0x17 and 0x18 disabled by module param allhwsupport=0. Try b43.allhwsupport=1 <4>[ 7.971395] b43: probe of bcma0:1 failed with error -524 <6>[ 7.971433] Broadcom 43xx driver loaded [ Features: PMNLS ] <6>[ 8.007807] brcmsmac bcma0:1: mfg 4bf core 812 rev 24 class 0 irq 16 <6>[ 8.062204] usb 6-1: New USB device found, idVendor=0a5c, idProduct=21e3 <6>[ 8.062220] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 <6>[ 8.062229] usb 6-1: Product: BCM20702A0 <6>[ 8.062236] usb 6-1: Manufacturer: Broadcom Corp <6>[ 8.062243] usb 6-1: SerialNumber: 7CE9D3D599C2 <6>[ 8.107711] Bluetooth: Core ver 2.20 <6>[ 8.107763] NET: Registered protocol family 31 <6>[ 8.107766] Bluetooth: HCI device and connection manager initialized <6>[ 8.107776] Bluetooth: HCI socket layer initialized <6>[ 8.107781] Bluetooth: L2CAP socket layer initialized <6>[ 8.107793] Bluetooth: SCO socket layer initialized <6>[ 8.331427] usb 3-4: New USB device found, idVendor=0bda, idProduct=0138 <6>[ 8.331442] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 <6>[ 8.331450] usb 3-4: Product: USB2.0-CRW <6>[ 8.331454] usb 3-4: Manufacturer: Generic <6>[ 8.331457] usb 3-4: SerialNumber: 20090516388200000 <6>[ 8.448271] usbcore: registered new interface driver uas <6>[ 8.450410] ums-realtek 3-4:1.0: USB Mass Storage device detected <6>[ 8.465636] usb 3-4: USB disconnect, device number 3 <6>[ 8.473725] scsi host2: usb-storage 3-4:1.0 <6>[ 8.473959] usbcore: registered new interface driver ums-realtek <5>[ 8.895352] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GP40LB10 1.00 PQ: 0 ANSI: 0 <6>[ 8.905928] sr 1:0:0:0: [sr0] scsi3-mmc drive: 31x/62x writer dvd-ram cd/rw xa/form2 cdda tray <6>[ 8.905943] cdrom: Uniform CD-ROM driver Revision: 3.20 <7>[ 8.906657] sr 1:0:0:0: Attached scsi CD-ROM sr0 <6>[ 9.411075] usbcore: registered new interface driver btusb <4>[ 9.413960] bluetooth hci0: Direct firmware load for brcm/BCM20702A0-0a5c-21e3.hcd failed with error -2 <6>[ 9.413971] Bluetooth: hci0: BCM: patch brcm/BCM20702A0-0a5c-21e3.hcd not found <7>[ 9.416186] ieee80211 phy0: Failed to initialize wep: -2 <7>[ 9.416205] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' <6>[ 9.416665] ieee80211 phy0: registered radio enabled led device: brcmsmac-phy0:radio gpio: 499 <6>[ 9.420149] brcmsmac bcma0:1 wlp3s0b1: renamed from wlan0 <3>[ 9.499208] Bluetooth: Unable to create crypto context <6>[ 11.594267] hidraw: raw HID events driver (C) Jiri Kosina <6>[ 11.600053] usbcore: registered new interface driver usbhid <6>[ 11.600061] usbhid: USB HID core driver <6>[ 11.635960] Uniform Multi-Platform E-IDE driver <6>[ 11.639579] ide-cd driver 5.00 <7>[ 14.286140] ISO 9660 Extensions: Microsoft Joliet Level 3 <7>[ 14.291699] ISO 9660 Extensions: RRIP_1991A <6>[ 26.815840] loop: module loaded <6>[ 26.821377] squashfs: version 4.0 (2009/01/31) Phillip Lougher <30>[ 26.871893] dracut: Mounted root filesystem none <30>[ 27.011637] dracut: Switching root <30>[ 29.699061] systemd-udevd[319]: starting version 217 <27>[ 30.434484] systemd-udevd[342]: failed to execute '/sbin/initqueue' '/sbin/initqueue --onetime --unique --name console_init_tty0 /lib/udev/console_init /dev/tty0': No such file or directory <6>[ 32.892350] NET: Registered protocol family 17 <6>[ 55.204669] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > <6>[ 58.272305] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 > <6>[ 74.239710] floppy0: no floppy controllers found <6>[ 74.894224] EXT4-fs (sda6): INFO: recovery required on readonly filesystem <6>[ 74.894235] EXT4-fs (sda6): write access will be enabled during recovery <6>[ 74.927172] EXT4-fs (sda6): recovery complete <6>[ 74.937914] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null) <6>[ 75.013169] EXT4-fs (sda8): INFO: recovery required on readonly filesystem <6>[ 75.013180] EXT4-fs (sda8): write access will be enabled during recovery <6>[ 75.240808] EXT4-fs (sda8): recovery complete <6>[ 75.250731] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) <6>[ 75.359593] EXT4-fs (sda9): INFO: recovery required on readonly filesystem <6>[ 75.359609] EXT4-fs (sda9): write access will be enabled during recovery <6>[ 75.380876] EXT4-fs (sda9): recovery complete <6>[ 75.381115] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) <6>[ 75.440311] EXT4-fs (sda10): INFO: recovery required on readonly filesystem <6>[ 75.440322] EXT4-fs (sda10): write access will be enabled during recovery <6>[ 75.471816] EXT4-fs (sda10): recovery complete <6>[ 75.472115] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null) <6>[ 85.957939] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null) <6>[ 86.459750] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl <6>[ 86.611612] ntfs: driver 2.1.31 [Flags: R/O MODULE]. <6>[ 86.730152] ntfs: volume version 3.1. <6>[ 86.802546] ntfs: volume version 3.1. <6>[ 86.892887] ntfs: volume version 3.1. <4>[ 86.965379] FAT-fs (sda5): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. <6>[ 87.000819] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl <6>[ 87.016950] Adding 5830352k swap on /dev/sda7. Priority:-1 extents:1 across:5830352k FS <6>[ 87.094343] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: acl <6>[ 87.418663] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: acl <6>[ 211.217931] usb 2-1: USB disconnect, device number 2 <6>[ 216.990424] usb 2-1: new high-speed USB device number 3 using ehci-pci <3>[ 217.117395] usb 2-1: device descriptor read/64, error -71 <6>[ 217.817494] usb 2-1: new high-speed USB device number 4 using ehci-pci <6>[ 217.933628] usb 2-1: New USB device found, idVendor=0204, idProduct=6025 <6>[ 217.933645] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 <6>[ 217.933653] usb 2-1: Product: USB0612A <6>[ 217.933661] usb 2-1: Manufacturer: <6>[ 217.933668] usb 2-1: SerialNumber: 345368291401 <6>[ 217.935329] usb-storage 2-1:1.0: USB Mass Storage device detected <6>[ 217.935902] scsi host3: usb-storage 2-1:1.0 <5>[ 218.937561] scsi 3:0:0:0: Direct-Access USB0612A 4.00 PQ: 0 ANSI: 2 <5>[ 218.941381] sd 3:0:0:0: [sdb] 503807 512-byte logical blocks: (257 MB/245 MiB) <5>[ 218.942463] sd 3:0:0:0: [sdb] Write Protect is off <7>[ 218.942471] sd 3:0:0:0: [sdb] Mode Sense: 00 00 00 00 <3>[ 218.943121] sd 3:0:0:0: [sdb] Asking for cache data failed <3>[ 218.943130] sd 3:0:0:0: [sdb] Assuming drive cache: write through <6>[ 218.950908] sdb: sdb1 <5>[ 218.956184] sd 3:0:0:0: [sdb] Attached SCSI removable disk <6>[ 228.090449] device-mapper: uevent: version 1.0.3 <6>[ 228.090690] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@redhat.com <6>[ 237.554726] floppy0: no floppy controllers found <6>[ 237.554820] wotion "BlankTime" "0"****************************************************************************** * Xorg.log ******************************************************************************** [ 32.894] (WW) Failed to open protocol names file /usr/lib64/xorg/protocol.txt [ 32.898] X.Org X Server 1.16.4 Release Date: 2014-12-20 [ 32.910] X Protocol Version 11, Revision 0 [ 32.915] Build Operating System: Linux_3.14.27-server-1.mga4 Mageia [ 32.925] Current Operating System: Linux localhost 3.19.8-desktop-3.mga5 #1 SMP Sat Jun 13 17:05:48 UTC 2015 x86_64 [ 32.925] Kernel command line: automatic=method:cdrom initrd=x86_64/all.rdz automatic=method:cdrom vga=788 splash quiet noiswmd [ 32.944] Build Date: 21 February 2015 05:46:52PM [ 32.950] [ 32.957] Current version of pixman: 0.32.6 [ 32.971] Before reporting problems, check http://bugs.mageia.org to make sure that you have the latest version. [ 32.971] Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. [ 33.004] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jul 19 09:54:35 2015 [ 33.015] (++) Using config file: "/tmp/Xconf" [ 33.024] (==) Using system config directory "/usr/share/X11/xorg.conf.d" [ 33.029] (==) ServerLayout "layout" [ 33.029] (**) |-->Screen "screen" (0) [ 33.029] (**) | |-->Monitor "monitor" [ 33.029] (**) | |-->Device "device" [ 33.029] (**) Option "BlankTime" "0" [ 33.029] (**) Option "StandbyTime" "0" [ 33.029] (**) Option "SuspendTime" "0" [ 33.029] (**) Option "OffTime" "0" [ 33.029] (==) Automatically adding devices [ 33.029] (==) Automatically enabling devices [ 33.029] (==) Automatically adding GPU devices [ 33.031] (**) FontPath set to: /usr/share/fonts:unscaled, catalogue:/etc/X11/fontpath.d [ 33.031] (==) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules" [ 33.031] (II) The server relies on udev to provide the list of input devices. If no devices become available, reconfigure udev or disable AutoAddDevices. [ 33.031] (II) Loader magic: 0x811d80 [ 33.031] (II) Module ABI versions: [ 33.031] X.Org ANSI C Emulation: 0.4 [ 33.031] X.Org Video Driver: 18.0 [ 33.031] X.Org XInput driver : 21.0 [ 33.031] X.Org Server Extension : 8.0 [ 33.031] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 33.034] (--) PCI:*(0:0:1:0) 1002:9806:103c:3387 rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/262144, I/O @ 0x00004000/256 [ 33.034] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory) [ 33.034] (WW) "glx" will not be loaded unless you've specified it to be loaded elsewhere. [ 33.034] (II) "glx" will be loaded even though the default is to disable it. [ 33.034] (II) LoadModule: "fbdev" [ 33.036] (II) Loading /usr/lib64/xorg/modules/drivers/fbdev_drv.so [ 33.041] (II) Module fbdev: vendor="X.Org Foundation" [ 33.041] compiled for 1.16.4, module version = 0.4.4 [ 33.041] Module class: X.Org Video Driver [ 33.041] ABI class: X.Org Video Driver, version 18.0 [ 33.041] (II) FBDEV: driver for framebuffer: fbdev [ 33.041] (++) using VT number 7 [ 33.041] (WW) xf86OpenConsole: setpgid failed: Operation not permitted [ 33.041] (WW) xf86OpenConsole: setsid failed: Operation not permitted [ 33.060] (II) Loading sub module "fbdevhw" [ 33.060] (II) LoadModule: "fbdevhw" [ 33.060] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [ 33.068] (II) Module fbdevhw: vendor="X.Org Foundation" [ 33.068] compiled for 1.16.4, module version = 0.0.2 [ 33.068] ABI class: X.Org Video Driver, version 18.0 [ 33.068] (EE) Unable to find a valid framebuffer device [ 33.068] (WW) Falling back to old probe method for fbdev [ 33.068] (II) Loading sub module "fbdevhw" [ 33.068] (II) LoadModule: "fbdevhw" [ 33.068] (II) Loading /usr/lib64/xorg/modules/libfbdevhw.so [ 33.068] (II) Module fbdevhw: vendor="X.Org Foundation" [ 33.068] compiled for 1.16.4, module version = 0.0.2 [ 33.068] ABI class: X.Org Video Driver, version 18.0 [ 33.068] (II) FBDEV(1): using default device [ 33.068] (EE) Screen 0 deleted because of no matching config section. [ 33.068] (II) UnloadModule: "fbdev" [ 33.068] (II) UnloadSubModule: "fbdevhw" [ 33.069] (**) FBDEV(0): Depth 16, (--) framebuffer bpp 16 [ 33.069] (==) FBDEV(0): RGB weight 565 [ 33.069] (==) FBDEV(0): Default visual is TrueColor [ 33.069] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0) [ 33.069] (II) FBDEV(0): hardware: VESA VGA (video memory: 1875kB) [ 33.069] (II) FBDEV(0): checking modes against framebuffer device... [ 33.069] (II) FBDEV(0): mode "default" not found [ 33.069] (II) FBDEV(0): checking modes against monitor... [ 33.069] (--) FBDEV(0): Virtual size is 800x600 (pitch 800) [ 33.069] (**) FBDEV(0): Built-in mode "current": 48.0 MHz, 46.9 kHz, 75.1 Hz [ 33.069] (II) FBDEV(0): Modeline "current"x0.0 48.00 800 832 928 1024 600 604 608 624 -hsync -vsync -csync (46.9 kHz b) [ 33.069] (++) FBDEV(0): DPI set to (75, 75) [ 33.069] (II) Loading sub module "fb" [ 33.069] (II) LoadModule: "fb" [ 33.069] (II) Loading /usr/lib64/xorg/modules/libfb.so [ 33.081] (II) Module fb: vendor="X.Org Foundation" [ 33.081] compiled for 1.16.4, module version = 1.0.0 [ 33.081] ABI class: X.Org ANSI C Emulation, version 0.4 [ 33.081] (**) FBDEV(0): using shadow framebuffer [ 33.081] (II) Loading sub module "shadow" [ 33.081] (II) LoadModule: "shadow" [ 33.082] (II) Loading /usr/lib64/xorg/modules/libshadow.so [ 33.082] (II) Module shadow: vendor="X.Org Foundation" [ 33.082] compiled for 1.16.4, module version = 1.1.0 [ 33.082] ABI class: X.Org ANSI C Emulation, version 0.4 [ 33.082] (EE) FBDEV(0): FBIOBLANK: Invalid argument [ 33.129] (==) FBDEV(0): Backing store enabled [ 33.129] (==) FBDEV(0): DPMS enabled [ 33.129] (==) RandR enabled [ 33.322] (II) config/udev: Adding input device Video Bus (/dev/input/event2) [ 33.322] (**) Video Bus: Applying InputClass "evdev keyboard catchall" [ 33.322] (II) LoadModule: "evdev" [ 33.322] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so [ 33.340] (II) Module evdev: vendor="X.Org Foundation" [ 33.340] compiled for 1.16.2, module version = 2.9.1 [ 33.340] Module class: X.Org XInput Driver [ 33.340] ABI class: X.Org XInput driver, version 21.0 [ 33.340] (II) Using input driver 'evdev' for 'Video Bus' [ 33.340] (**) Video Bus: always reports core events [ 33.340] (**) evdev: Video Bus: Device: "/dev/input/event2" [ 33.340] (--) evdev: Video Bus: Vendor 0 Product 0x6 [ 33.340] (--) evdev: Video Bus: Found keys [ 33.340] (II) evdev: Video Bus: Configuring as keyboard [ 33.340] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3/event2" [ 33.340] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 6) [ 33.340] (**) Option "xkb_rules" "evdev" [ 33.340] (**) Option "xkb_model" "pc104" [ 33.340] (**) Option "xkb_layout" "us" [ 33.387] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0) [ 33.387] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall" [ 33.387] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard' [ 33.387] (**) AT Translated Set 2 keyboard: always reports core events [ 33.387] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0" [ 33.388] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1 [ 33.388] (--) evdev: AT Translated Set 2 keyboard: Found keys [ 33.388] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard [ 33.388] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0" [ 33.388] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 7) [ 33.388] (**) Option "xkb_rules" "evdev" [ 33.388] (**) Option "xkb_model" "pc104" [ 33.388] (**) Option "xkb_layout" "us" [ 33.389] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1) [ 33.389] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall" [ 33.389] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall" [ 33.389] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons" [ 33.389] (II) LoadModule: "synaptics" [ 33.389] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so [ 33.389] (II) Module synaptics: vendor="X.Org Foundation" [ 33.389] compiled for 1.16.4, module version = 1.8.1 [ 33.389] Module class: X.Org XInput Driver [ 33.389] ABI class: X.Org XInput driver, version 21.0 [ 33.389] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad' [ 33.389] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 33.389] (**) Option "Device" "/dev/input/event1" [ 33.413] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device [ 33.413] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5776 (res 55) [ 33.413] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 5012 (res 103) [ 33.413] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255 [ 33.413] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15 [ 33.413] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple [ 33.413] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7 [ 33.413] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 33.413] (**) SynPS/2 Synaptics TouchPad: always reports core events [ 33.425] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input2/event1" [ 33.425] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 8) [ 33.425] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5 [ 33.425] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75 [ 33.425] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036 [ 33.425] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1 [ 33.425] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1 [ 33.425] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000 [ 33.425] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4 [ 33.426] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found [ 33.426] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0) [ 33.426] (II) No input driver specified, ignoring this device. [ 33.426] (II) This device may have been added with another device file. [ 33.427] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event3) [ 33.427] (II) No input driver specified, ignoring this device. [ 33.427] (II) This device may have been added with another device file. [ 33.427] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event4) [ 33.427] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall" [ 33.427] (II) Using input driver 'evdev' for 'HP WMI hotkeys' [ 33.427] (**) HP WMI hotkeys: always reports core events [ 33.428] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event4" [ 33.428] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0 [ 33.428] (--) evdev: HP WMI hotkeys: Found keys [ 33.428] (II) evdev: HP WMI hotkeys: Configuring as keyboard [ 33.428] (**) Option "config_info" "udev:/sys/devices/virtual/input/input5/event4" [ 33.428] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 9) [ 33.428] (**) Option "xkb_rules" "evdev" [ 33.428] (**) Option "xkb_model" "pc104" [ 33.428] (**) Option "xkb_layout" "us" [ 33.434] (EE) FBDEV(0): FBIOBLANK: Invalid argument [ 33.445] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 35.736] (EE) FBDEV(0): FBIOBLANK: Invalid argument [ 43.445] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 53.445] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 63.452] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 73.452] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 83.452] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 93.456] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 103.467] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 113.477] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 123.479] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 133.480] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 143.480] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 153.481] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 163.483] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 173.487] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 183.497] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 193.507] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 203.518] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 213.529] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 223.533] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) [ 233.544] (EE) dbus-core: error connecting to system bus: org.freedesktop.DBus.Error.FileNotFound (Failed to connect to socket /run/dbus/system_bus_socket: No such file or directory) ******************************************************************************** * monitor_full_edid ******************************************************************************** probing EDID using VBE (port 0) VBE: could not initialize LRMI VBE info call failed, skipping all ports ******************************************************************************** * stage1.log ******************************************************************************** * welcome to the Mageia install (mdk-stage1, version 5 built May 31 2015 21:10:37) * opening /proc/cmdline... * automatic=method:cdrom initrd=x86_64/all.rdz automatic=method:cdrom vga=788 splash quiet noiswmd * AUTOMATIC MODE: got 1 params * AUTOMATIC MODE: got 1 params * got 7 args * spawning a shell * loading modules descriptions * PCI: device 1002 4396 103c 3387 is "Advanced Micro Devices, Inc. [AMD/ATI]|SB7x0/SB8x0/SB9x0 USB EHCI Controller", driver is ehci_pci * have to insmod ehci_pci * succeeded ehci_pci * PCI: device 1002 4397 103c 3387 is "Advanced Micro Devices, Inc. [AMD/ATI]|SB7x0/SB8x0/SB9x0 USB OHCI0 Controller", driver is ohci_pci * have to insmod ohci_pci * succeeded ohci_pci * PCI: device 1002 4396 103c 3387 is "Advanced Micro Devices, Inc. [AMD/ATI]|SB7x0/SB8x0/SB9x0 USB EHCI Controller", driver is ehci_pci * PCI: device 1002 4397 103c 3387 is "Advanced Micro Devices, Inc. [AMD/ATI]|SB7x0/SB8x0/SB9x0 USB OHCI0 Controller", driver is ohci_pci * PCI: device 1002 4396 103c 3387 is "Advanced Micro Devices, Inc. [AMD/ATI]|SB7x0/SB8x0/SB9x0 USB EHCI Controller", driver is ehci_pci * PCI: device 1002 4397 103c 3387 is "Advanced Micro Devices, Inc. [AMD/ATI]|SB7x0/SB8x0/SB9x0 USB OHCI0 Controller", driver is ohci_pci * have to insmod usbhid * succeeded usbhid * PCMCIA: probing PCI bus.. * not found. * no pcmcia adapter found * have to insmod hid_generic * succeeded hid_generic * AUTOMATIC: parameter cdrom for method means returning CDROM drive * have to insmod ide_cd_mod * succeeded ide_cd_mod * looking for media adapters * looking for ide media * looking for media adapters * looking for scsi media * SCSI/1: sda is a ATA Hitachi HTS54505 * SCSI/0: sr0 is a HL-DT-ST DVDRAM GP40LB10 * looking for Compaq Smart Array media * looking for DAC960 * looking for VirtIO * mounting /dev/sr0 on /tmp/media as type iso9660 * have to insmod isofs * succeeded isofs * trying /tmp/media/x86_64 * assuming media/x86_64 is a mirror tree * found a Mageia CDROM, good news! * Total Memory: 134217720 Mbytes * mount_compressed_may_preload: /tmp/image/install/stage2//mdkinst.sqfs into /tmp/stage2 (preload = 1) * have to insmod loop * succeeded loop * have to insmod squashfs * succeeded squashfs * /dev/loop0 is available * mounting /dev/loop0 on /tmp/stage2 as type squashfs * lomount succeeded for /tmp/mdkinst.sqfs on /tmp/stage2 * third party: using modules location /tmp/image * killed shell * stage1: disconnecting life support systems ******************************************************************************** * ddebug.log ******************************************************************************** * getFile install/stage2/VERSION on cdrom://x86_64 * second stage install running (DrakX v16.105) * running: /usr/lib/systemd/systemd-udevd --daemon --resolve-names=never * running: udevadm trigger --type=subsystems --action=add * running: udevadm trigger --type=devices --action=add * running: modprobe microcode * getFile install/stage2/VERSION on cdrom://x86_64 * setting probeall usb-interface to ehci_hcd * setting probeall usb-interface to ehci_hcd ehci_pci * setting probeall usb-interface to ehci_hcd ehci_pci ohci_hcd * setting probeall usb-interface to ehci_hcd ehci_pci ohci_hcd ohci_pci * setting probeall usb-interface to ehci_hcd ehci_pci ohci_hcd ohci_pci * setting probeall usb-interface to ehci_hcd ehci_pci ohci_hcd ohci_pci * setting probeall usb-interface to ehci_hcd ehci_pci ohci_hcd ohci_pci * setting probeall usb-interface to ehci_hcd ehci_pci ohci_hcd ohci_pci * setting probeall usb-interface to ehci_hcd ehci_pci ohci_hcd ohci_pci * setting probeall usb-interface to ehci_hcd ehci_pci ohci_hcd ohci_pci * getFile install/patch-oem.pl on cdrom://x86_64 * change_phys_medium cdrom://x86_64 for file install/patch-oem.pl * Cannot open /tmp/media/x86_64/install/patch-oem.pl: No such file or directory * running: /sbin/modprobe af_packet * adding alias sound-slot-0 to snd_hda_intel * running: dmidecode * set option "power_save=1" for module "snd-ac97-codec" * adding alias sound-slot-1 to snd_hda_intel * set option "power_save=1" for module "snd-ac97-codec" * running: udevadm info --query env --path /devices/platform/i8042/serio1/input/input2 * i18n_env: lang:en_US country: locale|lang:en_US locale|country:_ LANGUAGE:en_US:en * running: monitor-edid -v --perl * getFile product.id on cdrom://x86_64 * product_id: vendor=Mageia,distribution=Mageia,type=basic,version=5,branch=Official,release=1.1,arch=x86_64,product=Free * META_CLASS=download * running: mount -t tmpfs none /tmp/.X11-unix * Trying with server Driver:fbdev * waiting for the server to start (1 ) * waiting for the server to start (2 1) * waiting for the server to start (3 2) * AFAIK X server is up * running: xset s off * running: xset -dpms * running: drakx-matchbox-window-manager * lang:en_US charset:C font:DejaVu Sans 12 consolefont:lat0-16 * starting step `selectLanguage' * i18n_env: lang:fr country:FR locale|lang:fr_FR.UTF-8 locale|country:fr_FR.UTF-8 LANGUAGE:fr_FR.UTF-8:fr * selectLanguage: pack_langs: fr_FR:fr utf8-flag: 1 * loading keymap fr-latin1 * running: setxkbmap -option * running: setxkbmap fr -model pc105 -option compose:rwin -compat * lang:fr charset:iso-8859-15 font:DejaVu Sans 12 consolefont:lat0-16 * step "selectLanguage" took: 0:00:12 * step `selectLanguage' finished * starting step `acceptLicense' * getFile release-notes.html on cdrom://x86_64 * getFile release-notes..html on cdrom://x86_64 * change_phys_medium cdrom://x86_64 for file release-notes..html * Cannot open /tmp/media/x86_64/release-notes..html: No such file or directory * lang:fr charset:iso-8859-15 font:DejaVu Sans 12 consolefont:lat0-16 * step "acceptLicense" took: 0:00:03 * step `acceptLicense' finished * starting step `selectMouse' * step "selectMouse" took: 0:00:00 * step `selectMouse' finished * starting step `setupSCSI' * HDIO_GETGEO on /dev/sda succeeded: heads=255 sectors=63 cylinders=60801 start=0 * id2hd: 0x3a0712b0=>sda * id2edd: 0x3a0712b0=>/sys/firmware/edd/int13_dev80 * geometry_from_edd sda 0x3a0712b0: 60801/255/63 * test_for_bad_drives(/dev/sda on sector #62) * running: blkid -o udev -p /dev/sda * running: blkid -o udev -p /dev/sda * found a dos partition table on /dev/sda at sector 0 * guess_geometry_from_partition_table sda: 60801/255/63 * is_geometry_valid_for_the_partition_table failed for (sda3, 512425312): 1023,254,62 vs 1023,0,7 with geometry 60801/255/63 * running: blkid -o udev -p /dev/sda1 * blkid gave: ntfs-3g 166EA9506EA92987 SYSTEM * running: blkid -o udev -p /dev/sda2 * blkid gave: ntfs-3g A8B29A13B299E65A * running: blkid -o udev -p /dev/sda3 * blkid gave: ntfs-3g F882C1EC82C1B004 Recovery * running: blkid -o udev -p /dev/sda5 * blkid gave: vfat 98F1-3773 HP_TOOLS * running: blkid -o udev -p /dev/sda6 * blkid gave: ext4 4ff5a8af-5f19-461c-b0fe-b8fc7c46b48c * running: blkid -o udev -p /dev/sda7 * blkid gave: swap a3ac7bc9-3f12-47cd-ba59-72c0382a3bd0 * running: blkid -o udev -p /dev/sda8 * blkid gave: ext4 6d15605b-0c91-44bb-80eb-c9ccdc10269e * running: blkid -o udev -p /dev/sda9 * blkid gave: ext4 61d4819c-60cb-4c86-a36a-fc3a99fa04dd * running: blkid -o udev -p /dev/sda10 * blkid gave: ext4 6de9bcc6-8baa-4d6b-8d54-df05024d911a * running: blkid -o udev -p /dev/loop0 * blkid gave: squashfs * running: udevadm settle * running: blkid -o udev -p /dev/sda1 * blkid gave: ntfs-3g 166EA9506EA92987 SYSTEM * running: blkid -o udev -p /dev/sda2 * blkid gave: ntfs-3g A8B29A13B299E65A * running: blkid -o udev -p /dev/sda3 * blkid gave: ntfs-3g F882C1EC82C1B004 Recovery * running: blkid -o udev -p /dev/sda5 * blkid gave: vfat 98F1-3773 HP_TOOLS * running: blkid -o udev -p /dev/sda6 * blkid gave: ext4 4ff5a8af-5f19-461c-b0fe-b8fc7c46b48c * running: blkid -o udev -p /dev/sda7 * blkid gave: swap a3ac7bc9-3f12-47cd-ba59-72c0382a3bd0 * running: blkid -o udev -p /dev/sda8 * blkid gave: ext4 6d15605b-0c91-44bb-80eb-c9ccdc10269e * running: blkid -o udev -p /dev/sda9 * blkid gave: ext4 61d4819c-60cb-4c86-a36a-fc3a99fa04dd * running: blkid -o udev -p /dev/sda10 * blkid gave: ext4 6de9bcc6-8baa-4d6b-8d54-df05024d911a * running: /sbin/modprobe floppy modprobe: ERROR: could not insert 'floppy': No such device * running: /sbin/modprobe -n floppy * found mounted partition on rootfs with / * found mounted partition on proc with /proc * found mounted partition on sysfs with /sys * found mounted partition on devtmpfs with /dev * found mounted partition on devpts with /dev/pts * found mounted partition on tmpfs with /dev/shm * found mounted partition on tmpfs with /run * found mounted partition on sr0 with /tmp/media * found mounted partition on loop0 with /tmp/stage2 * found mounted partition on none with /sysroot * found mounted partition on tmpfs with /dev/.initramfs * found mounted partition on none with /sys/kernel/debug * found mounted partition on loop0 with /usr * found mounted partition on none with /tmp/.X11-unix * found mounted partition on rootfs with / * found mounted partition on proc with /proc * found mounted partition on sysfs with /sys * found mounted partition on devtmpfs with /dev * found mounted partition on devpts with /dev/pts * found mounted partition on tmpfs with /dev/shm * found mounted partition on tmpfs with /run * found mounted partition on sr0 with /tmp/media * found mounted partition on loop0 with /tmp/stage2 * found mounted partition on none with /sysroot * found mounted partition on tmpfs with /dev/.initramfs * found mounted partition on none with /sys/kernel/debug * found mounted partition on loop0 with /usr * found mounted partition on none with /tmp/.X11-unix * win parts: sda1,sda2,sda5 * step "setupSCSI" took: 0:00:21 * step `setupSCSI' finished * starting step `selectInstallClass' * mounting UUID=4ff5a8af-5f19-461c-b0fe-b8fc7c46b48c on /tmp/inspect_tmp_dir as type ext4, options * ext4 already loaded * running: mount -t ext4 UUID=4ff5a8af-5f19-461c-b0fe-b8fc7c46b48c /tmp/inspect_tmp_dir -o ro matchbox-wm: X error warning (0xa005d2): 140 (opcode: 138) * calling umount(/tmp/inspect_tmp_dir) * running: umount /tmp/inspect_tmp_dir * mounting UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e on /tmp/inspect_tmp_dir as type ext4, options * ext4 already loaded * running: mount -t ext4 UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e /tmp/inspect_tmp_dir -o ro * find_root_parts found sda8: Mageia (Official) for x86_64 * calling umount(/tmp/inspect_tmp_dir) * running: umount /tmp/inspect_tmp_dir * mounting UUID=61d4819c-60cb-4c86-a36a-fc3a99fa04dd on /tmp/inspect_tmp_dir as type ext4, options * ext4 already loaded * running: mount -t ext4 UUID=61d4819c-60cb-4c86-a36a-fc3a99fa04dd /tmp/inspect_tmp_dir -o ro * calling umount(/tmp/inspect_tmp_dir) * running: umount /tmp/inspect_tmp_dir * mounting UUID=6de9bcc6-8baa-4d6b-8d54-df05024d911a on /tmp/inspect_tmp_dir as type ext4, options * ext4 already loaded * running: mount -t ext4 UUID=6de9bcc6-8baa-4d6b-8d54-df05024d911a /tmp/inspect_tmp_dir -o ro * calling umount(/tmp/inspect_tmp_dir) * running: umount /tmp/inspect_tmp_dir * proposing to upgrade partitions sda8 * lang:fr charset:iso-8859-15 font:DejaVu Sans 12 consolefont:lat0-16 * running: dumpe2fs /dev/sda8 dumpe2fs 1.42.12 (29-Aug-2014) * block_size 4096 * choosing to upgrade partition sda8 * mounting UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e on /tmp/inspect_tmp_dir as type ext4, options * ext4 already loaded * running: mount -t ext4 UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e /tmp/inspect_tmp_dir -o ro * fstab is now: sda1 /media/win_c * fstab is now: sda2 /media/win_e * fstab is now: sda3 /media/win_f * fstab is now: sda5 /media/win_d * fstab is now: sda6 /boot * fstab is now: sda7 swap * fstab is now: sda8 / * fstab is now: sda9 /opt * fstab is now: sda10 /home * calling umount(/tmp/inspect_tmp_dir) * running: umount /tmp/inspect_tmp_dir * upgrading mageia distribution * step "selectInstallClass" took: 0:00:11 * step `selectInstallClass' finished * starting step `doPartitionDisks' * fdisk before: Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x3a0712b0 Device Boot Start End Sectors Size Id Type /dev/sda1 * 2048 409599 407552 199M 7 HPFS/NTFS/exFAT /dev/sda2 409600 512425304 512015705 244.2G 7 HPFS/NTFS/exFAT /dev/sda3 512425312 561552074 49126763 23.4G 7 HPFS/NTFS/exFAT /dev/sda4 561555414 976768064 415212651 198G 5 Extended /dev/sda5 561555456 561568139 12684 6.2M b W95 FAT32 /dev/sda6 561571840 561712724 140885 68.8M 83 Linux /dev/sda7 561715200 573375914 11660715 5.6G 82 Linux swap / Solaris /dev/sda8 573378560 607353389 33974830 16.2G 83 Linux /dev/sda9 607356928 620317844 12960917 6.2G 83 Linux /dev/sda10 620320768 976768064 356447297 170G 83 Linux Disk /dev/loop0: 54.2 MiB, 56872960 bytes, 111080 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes * calling umount(/mnt/sys/kernel/debug/usb) * running: umount /mnt/sys/kernel/debug/usb umount: /mnt/sys/kernel/debug/usb: mountpoint not found * running: umount /mnt/sys/kernel/debug/usb * calling umount(/mnt/sys) * running: umount /mnt/sys umount: /mnt/sys: mountpoint not found * running: umount /mnt/sys * calling umount(/mnt/proc) * running: umount /mnt/proc umount: /mnt/proc: mountpoint not found * running: umount /mnt/proc * unmounting all filesystems * fdisk after Disk /dev/sda: 465.8 GiB, 500107862016 bytes, 976773168 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disklabel type: dos Disk identifier: 0x3a0712b0 Device Boot Start End Sectors Size Id Type /dev/sda1 * 2048 409599 407552 199M 7 HPFS/NTFS/exFAT /dev/sda2 409600 512425304 512015705 244.2G 7 HPFS/NTFS/exFAT /dev/sda3 512425312 561552074 49126763 23.4G 7 HPFS/NTFS/exFAT /dev/sda4 561555414 976768064 415212651 198G 5 Extended /dev/sda5 561555456 561568139 12684 6.2M b W95 FAT32 /dev/sda6 561571840 561712724 140885 68.8M 83 Linux /dev/sda7 561715200 573375914 11660715 5.6G 82 Linux swap / Solaris /dev/sda8 573378560 607353389 33974830 16.2G 83 Linux /dev/sda9 607356928 620317844 12960917 6.2G 83 Linux /dev/sda10 620320768 976768064 356447297 170G 83 Linux Disk /dev/loop0: 54.2 MiB, 56872960 bytes, 111080 sectors Units: sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes * step "doPartitionDisks" took: 0:00:01 * step `doPartitionDisks' finished * starting step `formatPartitions' * mount_part: device=sda8 mntpoint=/ isMounted= real_mntpoint= device_UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e * mounting UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e on /mnt/ as type ext4, options noatime,acl * ext4 already loaded * running: mount -t ext4 UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e /mnt -o noatime,acl * mount_part: device=sda1 mntpoint=/media/win_c isMounted= real_mntpoint= device_UUID=166EA9506EA92987 * mounting UUID=166EA9506EA92987 on /mnt/media/win_c as type ntfs, options defaults,umask=000 * running: /sbin/modprobe ntfs * running: mount -t ntfs UUID=166EA9506EA92987 /mnt/media/win_c * mount_part: device=sda8 mntpoint=/ isMounted=1 real_mntpoint= device_UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e * mount_part: device=sda2 mntpoint=/media/win_e isMounted= real_mntpoint= device_UUID=A8B29A13B299E65A * mounting UUID=A8B29A13B299E65A on /mnt/media/win_e as type ntfs, options defaults,umask=000 * running: mount -t ntfs UUID=A8B29A13B299E65A /mnt/media/win_e * mount_part: device=sda8 mntpoint=/ isMounted=1 real_mntpoint= device_UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e * mount_part: device=sda3 mntpoint=/media/win_f isMounted= real_mntpoint= device_UUID=F882C1EC82C1B004 * mounting UUID=F882C1EC82C1B004 on /mnt/media/win_f as type ntfs, options defaults,umask=000 * running: mount -t ntfs UUID=F882C1EC82C1B004 /mnt/media/win_f * mount_part: device=sda8 mntpoint=/ isMounted=1 real_mntpoint= device_UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e * mount_part: device=sda5 mntpoint=/media/win_d isMounted= real_mntpoint= device_UUID=98F1-3773 * mounting UUID=98F1-3773 on /mnt/media/win_d as type vfat, options umask=000,iocharset=utf8 * running: /sbin/modprobe nls_cp437 * running: /sbin/modprobe nls_iso8859_1 * running: /sbin/modprobe vfat * running: mount -t vfat UUID=98F1-3773 /mnt/media/win_d -o check=relaxed * mount_part: device=sda8 mntpoint=/ isMounted=1 real_mntpoint= device_UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e * mount_part: device=sda6 mntpoint=/boot isMounted= real_mntpoint= device_UUID=4ff5a8af-5f19-461c-b0fe-b8fc7c46b48c * mounting UUID=4ff5a8af-5f19-461c-b0fe-b8fc7c46b48c on /mnt/boot as type ext4, options noatime,acl * ext4 already loaded * running: mount -t ext4 UUID=4ff5a8af-5f19-461c-b0fe-b8fc7c46b48c /mnt/boot -o noatime,acl * mount_part: device=sda7 mntpoint=swap isMounted= real_mntpoint= device_UUID=a3ac7bc9-3f12-47cd-ba59-72c0382a3bd0 * swapon called with sda7 * mount_part: device=sda8 mntpoint=/ isMounted=1 real_mntpoint= device_UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e * mount_part: device=sda8 mntpoint=/ isMounted=1 real_mntpoint= device_UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e * mount_part: device=sda9 mntpoint=/opt isMounted= real_mntpoint= device_UUID=61d4819c-60cb-4c86-a36a-fc3a99fa04dd * mounting UUID=61d4819c-60cb-4c86-a36a-fc3a99fa04dd on /mnt/opt as type ext4, options acl,noatime * ext4 already loaded * running: mount -t ext4 UUID=61d4819c-60cb-4c86-a36a-fc3a99fa04dd /mnt/opt -o acl,noatime * mount_part: device=sda8 mntpoint=/ isMounted=1 real_mntpoint= device_UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e * running: tune2fs -o user_xattr /dev/sda10 tune2fs 1.42.12 (29-Aug-2014) * mount_part: device=sda10 mntpoint=/home isMounted= real_mntpoint= device_UUID=6de9bcc6-8baa-4d6b-8d54-df05024d911a * mounting UUID=6de9bcc6-8baa-4d6b-8d54-df05024d911a on /mnt/home as type ext4, options noatime,acl * ext4 already loaded * running: mount -t ext4 UUID=6de9bcc6-8baa-4d6b-8d54-df05024d911a /mnt/home -o noatime,acl * running: mount --bind /dev /mnt/dev * running: mount --bind /run /mnt/run * mounting none on /mnt/proc as type proc, options * running: mount -t proc none /mnt/proc * mounting none on /mnt/sys as type sysfs, options * running: mount -t sysfs none /mnt/sys * mounting none on /mnt/sys/kernel/debug/usb as type debugfs, options * step "formatPartitions" took: 0:00:01 * step `formatPartitions' finished * starting step `selectKeyboard' matchbox-wm: X error warning (0xa00846): 140 (opcode: 138) * lang:fr charset:iso-8859-15 font:DejaVu Sans 12 consolefont:lat0-16 * lang:fr charset:iso-8859-15 font:DejaVu Sans 12 consolefont:lat0-16 * loading keymap fr-latin1 * running: setxkbmap -option * running: setxkbmap fr -model pc105 -option compose:rwin -compat * step "selectKeyboard" took: 0:00:03 * step `selectKeyboard' finished * starting step `miscellaneous' * security level is 1 * step "miscellaneous" took: 0:00:00 * step `miscellaneous' finished * starting step `choosePackages' * change_phys_medium cdrom://x86_64/media for file media_info * getFile media_info/media.cfg on cdrom://x86_64/media * $phys_medium = { 'url' => 'cdrom://x86_64/media', 'isMounted' => 1, 'is_stage2_phys_medium' => 1, 'fs_type' => 'iso9660', 'method' => 'cdrom', 'mntpoint' => '/media/cdrom', 'is_suppl' => '', 'rel_path' => '/x86_64/media', 'device' => 'sr0', 'real_mntpoint' => '/tmp/media' }; * $stage2_phys_medium = { 'method' => 'cdrom', 'isMounted' => 1, 'fs_type' => 'iso9660', 'url' => 'cdrom://x86_64', 'rel_path' => '/x86_64', 'real_mntpoint' => '/tmp/media', 'device' => 'sr0' }; * adding distrib media from /tmp/image * opening rpmdb (root=/mnt, write=) * adding medium "Core Release" * adding medium "Nonfree Release" * parsing: /mnt/etc/urpmi/mediacfg.d/Official-4-x86_64 * parsing: /mnt/etc/urpmi/mediacfg.d/Official-5-x86_64 * setting medium Core Release phys_medium to cdrom://x86_64/media * setting medium Nonfree Release phys_medium to cdrom://x86_64/media * get_media_cfg read 0 headers * getFile media_info/rpmsrate on cdrom://x86_64/media (Core Release) * getFile media_info/compssUsers.pl on cdrom://x86_64/media (Core Release) * suppl_CDs=1 copy_rpms_on_disk= * comparing /tmp/image/media/core/media_info/MD5SUM and /mnt/var/lib/urpmi/MD5SUM.Core Release * copying MD5SUM file of "Core Release"... * copying [/tmp/image/media/core/media_info/synthesis.hdlist.cz] for medium "Core Release"... * ...copying done * computing md5sum of retrieved source synthesis * copying [/tmp/image/media/core/media_info/pubkey] for medium "Core Release"... * examining pubkey file of "Core Release"... * getting exclusive lock on rpm * opening rpmdb (root=/mnt, write=rw) * pubkey 80420f66 already imported * unlocking rpm database * comparing /tmp/image/media/nonfree/media_info/MD5SUM and /mnt/var/lib/urpmi/MD5SUM.Nonfree Release * copying MD5SUM file of "Nonfree Release"... * copying [/tmp/image/media/nonfree/media_info/synthesis.hdlist.cz] for medium "Nonfree Release"... * ...copying done * computing md5sum of retrieved source synthesis * copying [/tmp/image/media/nonfree/media_info/pubkey] for medium "Nonfree Release"... * examining pubkey file of "Nonfree Release"... * getting exclusive lock on rpm * opening rpmdb (root=/mnt, write=rw) * pubkey 80420f66 already imported * unlocking rpm database * update_medium: 1=2 * wrote config file [/mnt/etc/urpmi/urpmi.cfg] * the following driver(s) need nonfree firmware(s): r8169 * unknown package `x11-driver-video-fglrx' * unknown package `x11-driver-video-fglrx' * proprietary package x11-driver-video-fglrx not available * the following nonfree firmware(s) are needed for X.org: radeon-firmware * nonfree firmware is needed for the CPU (microcode) * choosen media: Core Release, Nonfree Release * examining synthesis file [/mnt/var/lib/urpmi/synthesis.hdlist.Core Release.cz] * examining synthesis file [/mnt/var/lib/urpmi/synthesis.hdlist.Nonfree Release.cz] * wrote config file [/mnt/etc/urpmi/urpmi.cfg] * urpmi completely set up * opened rpm database for examining existing packages * computing installed flags and size of installed packages * bestKernelPackage (-desktop): kernel-desktop-latest * unknown package `zd1201-firmware' * unknown package `sndconfig' * unknown package `libreoffice-report-builder' * unknown package `vlock' * unknown package `cvsweb' * unknown package `ayttm' * unknown package `jpilot-syncmal' * unknown package `rails' * unknown package `penguin-command' * unknown package `talk-server' * unknown package `perl-LaTeX-Driver' * unknown package `poedit' * unknown package `php-imap' * unknown package `xpaint' * unknown package `pidentd' * unknown package `jikes' * unknown package `tmake' * unknown package `task-enlightenment' * unknown package `flphoto' * unknown package `hcfpcimodem' * unknown package `gv' * unknown package `nedit' * unknown package `xfig' * unknown package `lout-doc' * unknown package `powermanga' * unknown package `fetchmailconf' * unknown package `gok' * unknown package `inn' * unknown package `crack-attack-music' * unknown package `mgetty-sendfax' * unknown package `samba-doc' * unknown package `qdvdauthor' * unknown package `gimp-help-el' * unknown package `zemberek-server' * unknown package `scilab' * unknown package `glibc-profile' * unknown package `enlightenment' * unknown package `gimp-help-fr' * unknown package `mgetty-contrib' * unknown package `wmnet' * unknown package `transmission-gtk' * unknown package `slmodem-kernel' * unknown package `xemacs-el' * unknown package `FaxMail' * unknown package `mailman' * unknown package `hsfmodem' * unknown package `latex2html' * unknown package `logcheck' * unknown package `gimp-help-ja' * unknown package `wine' * unknown package `xsoldier' * unknown package `wv' * unknown package `caja-image-converter' * unknown package `jabber2' * unknown package `extremetuxracer' * unknown package `yudit' * unknown package `faces' * unknown package `task-lxqt' * unknown package `emacs-leim' * unknown package `apache-mod_suexec' * unknown package `manslide' * unknown package `gimp-help-ru' * unknown package `isdn4net' * unknown package `cyrus-imapd' * unknown package `texlive-doc' * unknown package `pdksh' * unknown package `php-readline' * unknown package `units' * unknown package `lsb-core' * unknown package `busybox-static' * unknown package `docbook-style-dsssl-doc' * unknown package `ibod' * unknown package `xpdf' * unknown package `libreoffice-gnome' * unknown package `xmailbox' * unknown package `slmodem' * unknown package `ethemes' * unknown package `prism54-firmware' * unknown package `mountloop' * unknown package `epplets' * unknown package `libungif-progs' * unknown package `dip' * unknown package `octave' * unknown package `chromium' * unknown package `jed' * unknown package `php-pgsql' * unknown package `xfishtank' * unknown package `pysol' * unknown package `ibus-table-thai' * unknown package `php-manual-en' * unknown package `mgetty-viewfax' * unknown package `docbook-dtd31-sgml' * unknown package `joe' * unknown package `lout' * unknown package `cfengine-cfagent' * unknown package `gimp-help-de' * unknown package `php-mysql' * unknown package `fetchmail-daemon' * unknown package `libreoffice-style-tango' * unknown package `rsh' * unknown package `dkms-zaptel' * unknown package `madwifi' * unknown package `chromium-browser' * unknown package `libreoffice-presentation-minimizer' * unknown package `gcalctool' * unknown package `hylafax+-client' * unknown package `psacct' * unknown package `gimp-help-es' * unknown package `task-plasma5-minimal' * unknown package `ddd' * unknown package `emacs-tramp' * unknown package `ppdfilt' * unknown package `metamail' * unknown package `skobo' * unknown package `drbd-utils-heartbeat' * unknown package `anonftp' * unknown package `krb5-appl-servers' * unknown package `gnomeradio' * unknown package `icedtea-web' * unknown package `php-gd' * unknown package `inews' * unknown package `drakx-finish-install' * unknown package `zapping' * unknown package `slrn-pull' * unknown package `squidGuard' * unknown package `gcc-objc' * unknown package `rpm-rebuilder' * unknown package `faces-xface' * unknown package `ical' * unknown package `tetex-xdvi' * unknown package `xfburn' * unknown package `gimp-help-fi' * unknown package `tigervnc-server' * unknown package `xpilot' * unknown package `pcmanx-gtk2' * unknown package `lbreakout2' * unknown package `diald' * unknown package `x11-font-bh-type1' * unknown package `gimp-help-ko' * unknown package `reiser4progs' * unknown package `crack-attack-sounds' * unknown package `clanbomber' * unknown package `ueagle-firmware' * unknown package `trophy' * unknown package `libalsa-plugins' * unknown package `gcc-java' * unknown package `lsb' * unknown package `input-utils' * unknown package `talk' * unknown package `subtitleeditor' * unknown package `sound-scripts' * unknown package `rxvt' * unknown package `task-windowmaker' * unknown package `fluxbox' * unknown package `prozilla' * unknown package `lsb-qt4' * unknown package `gimp-help-sv' * unknown package `php-ldap' * unknown package `cooledit' * unknown package `mate-screenshot' * unknown package `slrn' * unknown package `webmin' * unknown package `flash-player-plugin' * unknown package `mozplugger' * unknown package `python-imaging' * unknown package `bzflag' * unknown package `pygtk+2.0' * unknown package `pmake' * unknown package `finger-server' * unknown package `timeconfig' * unknown package `tinyerp' * unknown package `mgetty' * unknown package `mate-applets' * unknown package `statserial' * unknown package `fetchmail' * unknown package `epiphany-extensions' * unknown package `libreoffice-presenter-screen' * unknown package `unionfs-utils' * unknown package `nslint' * unknown package `cttex' * unknown package `pygtk+2.0-libglade' * unknown package `ibus-cantonese' * unknown package `Maelstrom' * unknown package `scribus' * unknown package `emacs-el' * unknown package `qt4-doc' * unknown package `gimp-help-sl' * unknown package `macutils' * unknown package `lads' * unknown package `qtradio' * unknown package `zaptel-tools' * unknown package `draklive-install' * unknown package `megactl' * unknown package `celestia' * unknown package `texlive' * unknown package `rdate' * unknown package `gtkam' * unknown package `python-coherence-applet' * unknown package `anjuta' * unknown package `methane' * unknown package `bijiben' * unknown package `jpilot-Mail' * unknown package `plasma5-konsole' * unknown package `xpat2' * unknown package `csmash' * unknown package `gimp-help-nn' * unknown package `gkrellm' * unknown package `memprof' * unknown package `mutt' * unknown package `nil' * unknown package `pinfo' * unknown package `finger' * unknown package `xboard' * unknown package `madwifi-kernel' * unknown package `rocksndiamonds' * unknown package `task-3ddesktop-gtk' * unknown package `postgresql9.3-pltcl' * unknown package `2mandvd' * unknown package `supertux' * unknown package `php-cgi' * unknown package `acon' * unknown package `jed-xjed' * unknown package `pingus' * unknown package `stellarium' * unknown package `kolab' * unknown package `gimp-help-en' * unknown package `eom' * unknown package `armagetron' * unknown package `frozen-bubble' * unknown package `mate-search-tool' * unknown package `eggdrop' * unknown package `libmariadb-devel' * unknown package `bootsplash-themes' * unknown package `drakx-installer-binaries-probe' * unknown package `spamassassin' * unknown package `urlview' * unknown package `hugs98' * unknown package `perlftlib' * unknown package `tvtime' * unknown package `mgetty-voice' * unknown package `rio500' * unknown package `jadetex' * unknown package `groff-gxditview' * unknown package `ltris' * unknown package `kaffe' * unknown package `mon' * unknown package `hylafax+' * unknown package `pan' * unknown package `ypserv' * unknown package `links' * unknown package `eject' * unknown package `gtktalog' * unknown package `wu-ftpd' * unknown package `mures' * unknown package `gimp-help-zh_CN' * unknown package `crack-attack' * unknown package `mate-calc' * unknown package `toppler' * unknown package `freeciv-client' * unknown package `uucp' * unknown package `exaile' * unknown package `sb16_csp' * unknown package `rsh-server' * unknown package `xtraceroute' * unknown package `lesstif-mwm' * unknown package `adns' * unknown package `rusers' * unknown package `procinfo' * unknown package `sddm' * unknown package `task-lxqt' * unknown package `task-e17' * unknown package `task-plasma5-minimal' * unknown package `postgresql9.1' * unknown package `postgresql9.2' * unknown package `lsb-core' * compssUsers.pl got: "Graphical Environment|KDE Workstation", "Graphical Environment|GNOME Workstation", "Graphical Environment|XFCE Workstation", "Graphical Environment|MATE Workstation", "Graphical Environment|Cinnamon Workstation", "Graphical Environment|LXDE Desktop", "Server|Web/FTP", "Server|Mail", "Server|Database", "Server|Firewall/Router", "Server|Network Computer server", "Workstation|Office Workstation", "Workstation|Game station", "Workstation|Multimedia station", "Workstation|Internet station", "Workstation|Network Computer (client)", "Workstation|Configuration", "Workstation|Console Tools", "Workstation|Development", "Workstation|Documentation" * selecting microcode_ctl because of CPU needs microcode * selecting kernel-firmware-nonfree,radeon-firmware because of either CPU or GFX needs firmware * selecting cpupower because of CPU needs cpupower * selecting acpi,acpid,mageia-gfxboot-theme because of needed later at summary stage * selecting shorewall,shorewall-ipv6,mandi-ifw because of needed for firewall/security * selecting perl-Hal-Cdroms because of method='cdrom' * selecting ntfsprogs,dosfstools,e2fsprogs,util-linux because of needed by some fs * selecting ntfs-3g because of some fs is NTFS-3G * unknown package `ntfsprogs' * selecting packages to upgrade * auto-select: adding lib64oxygen-gtk-1.4.6-2.mga5.x86_64 replacing lib64oxygen-gtk-1.4.6-2.mga4.x86_64 * auto-select: adding net_monitor-0.20-1.mga5.x86_64 replacing net_monitor-0.17-1.mga4.x86_64 * auto-select: adding kipi-plugins-advancedslideshow-4.8.0-1.mga5.x86_64 replacing kipi-plugins-advancedslideshow-3.5.0-3.2.mga4.x86_64 * auto-select: adding system-config-printer-libs-1.5.5-5.mga5.noarch replacing system-config-printer-libs-1.4.3-1.2.mga4.x86_64 * auto-select: adding kdm-handbook-4.11.16-5.mga5.noarch replacing kdm-handbook-4.11.14-1.mga4.noarch * auto-select: adding cups-filters-1.0.67-1.mga5.x86_64 replacing foomatic-filters-4.0.17-2.mga4.x86_64 * auto-select: adding oxygen-gtk-1.4.6-2.mga5.x86_64 replacing oxygen-gtk-1.4.6-2.mga4.x86_64 * auto-select: adding system-config-printer-1.5.5-5.mga5.x86_64 replacing system-config-printer-1.4.3-1.2.mga4.x86_64 * auto-select: adding lib64caja-extension1-1.8.2-4.mga5.x86_64 replacing lib64caja-extension1-1.6.3-1.3.mga4.x86_64 * auto-select: adding system-config-printer-udev-1.5.5-5.mga5.x86_64 replacing system-config-printer-udev-1.4.3-1.2.mga4.x86_64 * auto-select: adding open-1.4-26.mga5.x86_64 replacing open-1.4-24.mga4.x86_64 * selected pkgs to upgrade: system-config-printer-udev kdm-handbook oxygen-gtk system-config-printer-libs system-config-printer net_monitor open lib64oxygen-gtk cups-filters lib64caja-extension1 kipi-plugins-advancedslideshow * resolving dependencies... * selecting system-config-printer-udev-1.5.5-5.mga5.x86_64 * set_rejected: system-config-printer-udev-1.4.3-1.2.mga4.x86_64 * requiring system-config-printer-libs[== 1.5.5-5.mga5] for system-config-printer-udev-1.5.5-5.mga5.x86_64 * chosen system-config-printer-libs-1.5.5-5.mga5.noarch for system-config-printer-libs[== 1.5.5-5.mga5] * selecting system-config-printer-libs-1.5.5-5.mga5.noarch * set_rejected: system-config-printer-libs-1.4.3-1.2.mga4.x86_64 * requiring python3-cups,python3-curl,python3-dbus for system-config-printer-libs-1.5.5-5.mga5.noarch * selecting python3-cups-1.9.68-3.mga5.x86_64 * installed package python-cups-1.9.66-1.mga4.x86_64 is conflicting with python3-cups-1.9.68-3.mga5.x86_64 (Conflicts: python-cups[< 1.9.68-3.mga5]) * set_rejected: python-cups-1.9.66-1.mga4.x86_64 * selecting python3-dbus-1.2.0-12.mga5.x86_64 * selecting python3-curl-7.19.5-4.mga5.x86_64 * selecting kdm-handbook-4.11.16-5.mga5.noarch * set_rejected: kdm-handbook-4.11.14-1.mga4.noarch * selecting oxygen-gtk-1.4.6-2.mga5.x86_64 * set_rejected: oxygen-gtk-1.4.6-2.mga4.x86_64 * selecting system-config-printer-1.5.5-5.mga5.x86_64 * set_rejected: system-config-printer-1.4.3-1.2.mga4.x86_64 * requiring python3-requests,typelib(Polkit) for system-config-printer-1.5.5-5.mga5.x86_64 * selecting python3-requests-2.3.0-5.mga5.noarch * requiring python3-chardet,python3-urllib3 for python3-requests-2.3.0-5.mga5.noarch * selecting python3-urllib3-1.9-5.mga5.noarch * requiring python3-six for python3-urllib3-1.9-5.mga5.noarch * selecting python3-six-1.7.3-4.mga5.noarch * selecting python3-chardet-2.2.1-4.mga5.noarch * chosen lib64polkit-gir1.0-0.112-8.mga5.x86_64 for typelib(Polkit) * selecting lib64polkit-gir1.0-0.112-8.mga5.x86_64 * requiring lib64polkit1_0[== 0.112-8.mga5] for lib64polkit-gir1.0-0.112-8.mga5.x86_64 * chosen lib64polkit1_0-0.112-8.mga5.x86_64 for lib64polkit1_0[== 0.112-8.mga5] * the more recent lib64polkit1_0-0.113-1.mga4.x86_64 is installed, but does not provide lib64polkit1_0[== 0.112-8.mga5] whereas lib64polkit1_0-0.112-8.mga5.x86_64 does * selecting lib64polkit1_0-0.112-8.mga5.x86_64 * unselecting lib64polkit1_0-0.112-8.mga5.x86_64 * unselecting lib64polkit-gir1.0-0.112-8.mga5.x86_64 * unselecting system-config-printer-1.5.5-5.mga5.x86_64 * requiring polkit[== 0.112-8.mga5] for lib64polkit1_0-0.112-8.mga5.x86_64 * chosen polkit-0.112-8.mga5.x86_64 for polkit[== 0.112-8.mga5] * the more recent polkit-0.113-1.mga4.x86_64 is installed, but does not provide polkit[== 0.112-8.mga5] whereas polkit-0.112-8.mga5.x86_64 does * selecting polkit-0.112-8.mga5.x86_64 * unselecting polkit-0.112-8.mga5.x86_64 * set_rejected: polkit-desktop-policy-0.112-2.mga4.noarch * selecting net_monitor-0.20-1.mga5.x86_64 * set_rejected: net_monitor-0.17-1.mga4.x86_64 * selecting open-1.4-26.mga5.x86_64 * set_rejected: open-1.4-24.mga4.x86_64 * selecting lib64oxygen-gtk-1.4.6-2.mga5.x86_64 * set_rejected: lib64oxygen-gtk-1.4.6-2.mga4.x86_64 * selecting cups-filters-1.0.67-1.mga5.x86_64 * set_rejected: foomatic-filters-4.0.17-2.mga4.x86_64 * requiring lib64cups-filters1[== 1.0.67-1.mga5],libcupsfilters.so.1()(64bit),libfontembed.so.1()(64bit) for cups-filters-1.0.67-1.mga5.x86_64 * chosen lib64cups-filters1-1.0.67-1.mga5.x86_64 for libfontembed.so.1()(64bit) * selecting lib64cups-filters1-1.0.67-1.mga5.x86_64 * chosen lib64cups-filters1-1.0.67-1.mga5.x86_64 for lib64cups-filters1[== 1.0.67-1.mga5] * chosen lib64cups-filters1-1.0.67-1.mga5.x86_64 for libcupsfilters.so.1()(64bit) * selecting lib64caja-extension1-1.8.2-4.mga5.x86_64 * set_rejected: lib64caja-extension1-1.6.3-1.3.mga4.x86_64 * selecting kipi-plugins-advancedslideshow-4.8.0-1.mga5.x86_64 * set_rejected: kipi-plugins-advancedslideshow-3.5.0-3.2.mga4.x86_64 * installed system-config-printer-1.4.3-1.2.mga4.x86_64 is conflicting because of unsatisfied system-config-printer-udev[== 1.4.3-1.2.mga4] * promoting system-config-printer-1.5.5-5.mga5.x86_64 because of conflict above * selecting system-config-printer-1.5.5-5.mga5.x86_64 * set_rejected: system-config-printer-1.4.3-1.2.mga4.x86_64 * requiring typelib(Polkit) for system-config-printer-1.5.5-5.mga5.x86_64 * chosen lib64polkit-gir1.0-0.112-8.mga5.x86_64 for typelib(Polkit) * selecting lib64polkit-gir1.0-0.112-8.mga5.x86_64 * requiring lib64polkit1_0[== 0.112-8.mga5] for lib64polkit-gir1.0-0.112-8.mga5.x86_64 * chosen lib64polkit1_0-0.112-8.mga5.x86_64 for lib64polkit1_0[== 0.112-8.mga5] * the more recent lib64polkit1_0-0.113-1.mga4.x86_64 is installed, but does not provide lib64polkit1_0[== 0.112-8.mga5] whereas lib64polkit1_0-0.112-8.mga5.x86_64 does * selecting lib64polkit1_0-0.112-8.mga5.x86_64 * unselecting lib64polkit1_0-0.112-8.mga5.x86_64 * unselecting lib64polkit-gir1.0-0.112-8.mga5.x86_64 * unselecting system-config-printer-1.5.5-5.mga5.x86_64 * requiring polkit[== 0.112-8.mga5] for lib64polkit1_0-0.112-8.mga5.x86_64 * chosen polkit-0.112-8.mga5.x86_64 for polkit[== 0.112-8.mga5] * the more recent polkit-0.113-1.mga4.x86_64 is installed, but does not provide polkit[== 0.112-8.mga5] whereas polkit-0.112-8.mga5.x86_64 does * selecting polkit-0.112-8.mga5.x86_64 * unselecting polkit-0.112-8.mga5.x86_64 * set_rejected: polkit-desktop-policy-0.112-2.mga4.noarch * installed system-config-printer-udev-1.4.3-1.2.mga4.x86_64 is conflicting because of unsatisfied system-config-printer-libs[== 1.4.3-1.2.mga4] * promoting system-config-printer-udev-1.5.5-5.mga5.x86_64 because of conflict above * installed system-config-printer-1.4.3-1.2.mga4.x86_64 is conflicting because of unsatisfied system-config-printer-libs[== 1.4.3-1.2.mga4] * promoting system-config-printer-1.5.5-5.mga5.x86_64 because of conflict above * selecting system-config-printer-1.5.5-5.mga5.x86_64 * set_rejected: system-config-printer-1.4.3-1.2.mga4.x86_64 * requiring typelib(Polkit) for system-config-printer-1.5.5-5.mga5.x86_64 * chosen lib64polkit-gir1.0-0.112-8.mga5.x86_64 for typelib(Polkit) * selecting lib64polkit-gir1.0-0.112-8.mga5.x86_64 * requiring lib64polkit1_0[== 0.112-8.mga5] for lib64polkit-gir1.0-0.112-8.mga5.x86_64 * chosen lib64polkit1_0-0.112-8.mga5.x86_64 for lib64polkit1_0[== 0.112-8.mga5] * the more recent lib64polkit1_0-0.113-1.mga4.x86_64 is installed, but does not provide lib64polkit1_0[== 0.112-8.mga5] whereas lib64polkit1_0-0.112-8.mga5.x86_64 does * selecting lib64polkit1_0-0.112-8.mga5.x86_64 * unselecting lib64polkit1_0-0.112-8.mga5.x86_64 * unselecting lib64polkit-gir1.0-0.112-8.mga5.x86_64 * unselecting system-config-printer-1.5.5-5.mga5.x86_64 * requiring polkit[== 0.112-8.mga5] for lib64polkit1_0-0.112-8.mga5.x86_64 * chosen polkit-0.112-8.mga5.x86_64 for polkit[== 0.112-8.mga5] * the more recent polkit-0.113-1.mga4.x86_64 is installed, but does not provide polkit[== 0.112-8.mga5] whereas polkit-0.112-8.mga5.x86_64 does * selecting polkit-0.112-8.mga5.x86_64 * unselecting polkit-0.112-8.mga5.x86_64 * set_rejected: polkit-desktop-policy-0.112-2.mga4.noarch * installed system-config-printer-libs-1.4.3-1.2.mga4.x86_64 is conflicting because of unsatisfied python-cups * promoting system-config-printer-libs-1.5.5-5.mga5.noarch because of conflict above * installed system-config-printer-libs-1.4.3-1.2.mga4.x86_64 is conflicting because of unsatisfied foomatic * promoting system-config-printer-libs-1.5.5-5.mga5.noarch because of conflict above * ERROR: selection failed: * ...done * finally selected pkgs: cups-filters kdm-handbook kipi-plugins-advancedslideshow lib64caja-extension1 lib64cups-filters1 lib64oxygen-gtk net_monitor open oxygen-gtk python3-chardet python3-cups python3-curl python3-dbus python3-requests python3-six python3-urllib3 system-config-printer-libs system-config-printer-udev * getAvailableSpace_mounted 9732488 KB * available size 8.3Gio (corrected 6.9Gio) * setSelectedFromCompssList: reached size 4MB, up to indice 5 (less than 6.9Gio) for flags 3D BURNER CHARSET"iso-8859-15" DVD LOCALES"fr" LOCALES"fr_FR" META_CLASS"download" SMP SOUND TRUE USB UTF8 WEBCAM * setSelectedFromCompssList: cups-filters kdm-handbook kipi-plugins-advancedslideshow lib64caja-extension1 lib64cups-filters1 lib64oxygen-gtk net_monitor open oxygen-gtk python3-chardet python3-cups python3-curl python3-dbus python3-requests python3-six python3-urllib3 system-config-printer-libs system-config-printer-udev * setSelectedFromCompssList: reached size 4MB, up to indice 4 (less than 6.9Gio) for flags 3D BURNER CHARSET"iso-8859-15" DVD LOCALES"fr" LOCALES"fr_FR" META_CLASS"download" SMP SOUND TRUE USB UTF8 WEBCAM * setSelectedFromCompssList: cups-filters kdm-handbook kipi-plugins-advancedslideshow lib64caja-extension1 lib64cups-filters1 lib64oxygen-gtk net_monitor open oxygen-gtk python3-chardet python3-cups python3-curl python3-dbus python3-requests python3-six python3-urllib3 system-config-printer-libs system-config-printer-udev * rpmsrate_flags_chosen's: 3D BURNER CHARSET"iso-8859-15" DVD LOCALES"fr" LOCALES"fr_FR" META_CLASS"download" SMP SOUND TRUE USB UTF8 WEBCAM * step "choosePackages" took: 0:00:56 * step `choosePackages' finished * starting step `installPackages' matchbox-wm: X error warning (0xa00a96): 140 (opcode: 138) * dropping bootloader entry linux since /boot/vmlinuz doesn't exist * dropping bootloader entry linux-nonfb since /boot/vmlinuz doesn't exist * dropping bootloader entry failsafe since /boot/vmlinuz doesn't exist * dropping bootloader entry desktop 3.12.8-2.mga4 since /boot/vmlinuz-3.12.8-desktop-2.mga4 doesn't exist * dropping bootloader entry desktop 3.12.9-1.mga4 since /boot/vmlinuz-3.12.9-desktop-1.mga4 doesn't exist * dropping bootloader entry desktop 3.12.20-1.mga4 since /boot/vmlinuz-3.12.20-desktop-1.mga4 doesn't exist * merging modules::modprobe_conf * converting filesystem for usrmove * running: /usr/lib/dracut/modules.d/30convertfs/convertfs.sh /mnt Your system is already converted. * running: mount --bind /run /mnt//run * running: mount --bind /tmp/.X11-unix /mnt//tmp/.X11-unix * setting excludedocs to * getFile install/oem-theme.rpm on cdrom://x86_64 * change_phys_medium cdrom://x86_64 for file install/oem-theme.rpm * Cannot open /tmp/media/x86_64/install/oem-theme.rpm: No such file or directory * getFile install/extra/advertising.fr/list on cdrom://x86_64 * change_phys_medium cdrom://x86_64 for file install/extra/advertising.fr/list * Cannot open /tmp/media/x86_64/install/extra/advertising.fr/list: No such file or directory * getFile install/extra/advertising.fr/list on cdrom://x86_64 * change_phys_medium cdrom://x86_64 for file install/extra/advertising.fr/list * Cannot open /tmp/media/x86_64/install/extra/advertising.fr/list: No such file or directory * getFile install/extra/advertising/list on cdrom://x86_64 * getFile install/extra/advertising/01_IM_mageia.png on cdrom://x86_64 * getFile install/extra/advertising/01_IM_mageia.pl on cdrom://x86_64 * getFile install/extra/advertising/02_IM_mageia.png on cdrom://x86_64 * getFile install/extra/advertising/02_IM_mageia.pl on cdrom://x86_64 * getFile install/extra/advertising/03_IM_mageia.png on cdrom://x86_64 * getFile install/extra/advertising/03_IM_mageia.pl on cdrom://x86_64 * getFile install/extra/advertising/04_IM_mageia.png on cdrom://x86_64 * getFile install/extra/advertising/04_IM_mageia.pl on cdrom://x86_64 * getFile install/extra/advertising/05_IM_mageia.png on cdrom://x86_64 * getFile install/extra/advertising/05_IM_mageia.pl on cdrom://x86_64 * getFile install/extra/advertising/06_IM_mageia.png on cdrom://x86_64 * getFile install/extra/advertising/06_IM_mageia.pl on cdrom://x86_64 * getFile install/extra/advertising/07_IM_mageia.png on cdrom://x86_64 * getFile install/extra/advertising/07_IM_mageia.pl on cdrom://x86_64 * getFile install/extra/advertising/08_IM_mageia.png on cdrom://x86_64 * getFile install/extra/advertising/08_IM_mageia.pl on cdrom://x86_64 * getFile install/extra/advertising/09_IM_mageia.png on cdrom://x86_64 * getFile install/extra/advertising/09_IM_mageia.pl on cdrom://x86_64 * getFile install/extra/advertising/10_IM_mageia.png on cdrom://x86_64 * getFile install/extra/advertising/10_IM_mageia.pl on cdrom://x86_64 * getFile release-notes.html on cdrom://x86_64 * getFile release-notes..html on cdrom://x86_64 * change_phys_medium cdrom://x86_64 for file release-notes..html * Cannot open /tmp/media/x86_64/release-notes..html: No such file or directory matchbox-wm: X error warning (0xa00af9): 140 (opcode: 138) * examining packagesToInstall of medium Core Release * examining packagesToInstall of medium Nonfree Release * found 18 packages to install: kipi-plugins-advancedslideshow-4.8.0-1.mga5.x86_64, oxygen-gtk-1.4.6-2.mga5.x86_64, kdm-handbook-4.11.16-5.mga5.noarch, lib64caja-extension1-1.8.2-4.mga5.x86_64, system-config-printer-udev-1.5.5-5.mga5.x86_64, ... * install::pkgs::install /mnt * install::pkgs::install the following: python3-cups python3-six lib64cups-filters1 kdm-handbook system-config-printer-udev python3-curl open net_monitor lib64caja-extension1 kipi-plugins-advancedslideshow lib64oxygen-gtk oxygen-gtk python3-urllib3 python3-dbus python3-requests system-config-printer-libs python3-chardet cups-filters * opened /mnt/root/drakx/install.log * rpm transactions start * opening rpmdb (root=/mnt, write=) * getting graph of dependencies for sorting * sorting graph of dependencies * rpms sorted by dependencies: kipi-plugins-advancedslideshow lib64oxygen-gtk oxygen-gtk kdm-handbook lib64caja-extension1 python3-cups python3-curl python3-dbus system-config-printer-libs system-config-printer-udev python3-six python3-chardet lib64cups-filters1 cups-filters net_monitor open python3-urllib3 python3-requests * selecting lib64oxygen-gtk-1.4.6-2.mga5.x86_64 * set_rejected: lib64oxygen-gtk-1.4.6-2.mga4.x86_64 * selecting lib64caja-extension1-1.8.2-4.mga5.x86_64 * set_rejected: lib64caja-extension1-1.6.3-1.3.mga4.x86_64 * selecting kipi-plugins-advancedslideshow-4.8.0-1.mga5.x86_64 * set_rejected: kipi-plugins-advancedslideshow-3.5.0-3.2.mga4.x86_64 * selecting python3-curl-7.19.5-4.mga5.x86_64 * selecting python3-cups-1.9.68-3.mga5.x86_64 * installed package python-cups-1.9.66-1.mga4.x86_64 is conflicting with python3-cups-1.9.68-3.mga5.x86_64 (Conflicts: python-cups[< 1.9.68-3.mga5]) * set_rejected: python-cups-1.9.66-1.mga4.x86_64 * selecting oxygen-gtk-1.4.6-2.mga5.x86_64 * set_rejected: oxygen-gtk-1.4.6-2.mga4.x86_64 * selecting python3-dbus-1.2.0-12.mga5.x86_64 * selecting kdm-handbook-4.11.16-5.mga5.noarch * set_rejected: kdm-handbook-4.11.14-1.mga4.noarch * installed system-config-printer-libs-1.4.3-1.2.mga4.x86_64 is conflicting because of unsatisfied python-cups * promoting system-config-printer-libs-1.5.5-5.mga5.noarch because of conflict above * selecting system-config-printer-libs-1.5.5-5.mga5.noarch * set_rejected: system-config-printer-libs-1.4.3-1.2.mga4.x86_64 * installed system-config-printer-udev-1.4.3-1.2.mga4.x86_64 is conflicting because of unsatisfied system-config-printer-libs[== 1.4.3-1.2.mga4] * promoting system-config-printer-udev-1.5.5-5.mga5.x86_64 because of conflict above * installed system-config-printer-1.4.3-1.2.mga4.x86_64 is conflicting because of unsatisfied system-config-printer-libs[== 1.4.3-1.2.mga4] * promoting system-config-printer-1.5.5-5.mga5.x86_64 because of conflict above * selecting system-config-printer-udev-1.5.5-5.mga5.x86_64 * set_rejected: system-config-printer-udev-1.4.3-1.2.mga4.x86_64 * selecting system-config-printer-1.5.5-5.mga5.x86_64 * set_rejected: system-config-printer-1.4.3-1.2.mga4.x86_64 * requiring python3-requests,typelib(Polkit) for system-config-printer-1.5.5-5.mga5.x86_64 * selecting python3-requests-2.3.0-5.mga5.noarch * requiring python3-chardet,python3-urllib3 for python3-requests-2.3.0-5.mga5.noarch * selecting python3-chardet-2.2.1-4.mga5.noarch * selecting python3-urllib3-1.9-5.mga5.noarch * requiring python3-six for python3-urllib3-1.9-5.mga5.noarch * selecting python3-six-1.7.3-4.mga5.noarch * chosen lib64polkit-gir1.0-0.112-8.mga5.x86_64 for typelib(Polkit) * selecting lib64polkit-gir1.0-0.112-8.mga5.x86_64 * requiring lib64polkit1_0[== 0.112-8.mga5] for lib64polkit-gir1.0-0.112-8.mga5.x86_64 * chosen lib64polkit1_0-0.112-8.mga5.x86_64 for lib64polkit1_0[== 0.112-8.mga5] * the more recent lib64polkit1_0-0.113-1.mga4.x86_64 is installed, but does not provide lib64polkit1_0[== 0.112-8.mga5] whereas lib64polkit1_0-0.112-8.mga5.x86_64 does * selecting lib64polkit1_0-0.112-8.mga5.x86_64 * unselecting lib64polkit1_0-0.112-8.mga5.x86_64 * unselecting lib64polkit-gir1.0-0.112-8.mga5.x86_64 * unselecting system-config-printer-1.5.5-5.mga5.x86_64 * requiring polkit[== 0.112-8.mga5] for lib64polkit1_0-0.112-8.mga5.x86_64 * chosen polkit-0.112-8.mga5.x86_64 for polkit[== 0.112-8.mga5] * the more recent polkit-0.113-1.mga4.x86_64 is installed, but does not provide polkit[== 0.112-8.mga5] whereas polkit-0.112-8.mga5.x86_64 does * selecting polkit-0.112-8.mga5.x86_64 * unselecting polkit-0.112-8.mga5.x86_64 * set_rejected: polkit-desktop-policy-0.112-2.mga4.noarch * installed system-config-printer-1.4.3-1.2.mga4.x86_64 is conflicting because of unsatisfied system-config-printer-udev[== 1.4.3-1.2.mga4] * promoting system-config-printer-1.5.5-5.mga5.x86_64 because of conflict above * selecting system-config-printer-1.5.5-5.mga5.x86_64 * set_rejected: system-config-printer-1.4.3-1.2.mga4.x86_64 * requiring typelib(Polkit) for system-config-printer-1.5.5-5.mga5.x86_64 * chosen lib64polkit-gir1.0-0.112-8.mga5.x86_64 for typelib(Polkit) * selecting lib64polkit-gir1.0-0.112-8.mga5.x86_64 * requiring lib64polkit1_0[== 0.112-8.mga5] for lib64polkit-gir1.0-0.112-8.mga5.x86_64 * chosen lib64polkit1_0-0.112-8.mga5.x86_64 for lib64polkit1_0[== 0.112-8.mga5] * the more recent lib64polkit1_0-0.113-1.mga4.x86_64 is installed, but does not provide lib64polkit1_0[== 0.112-8.mga5] whereas lib64polkit1_0-0.112-8.mga5.x86_64 does * selecting lib64polkit1_0-0.112-8.mga5.x86_64 * unselecting lib64polkit1_0-0.112-8.mga5.x86_64 * unselecting lib64polkit-gir1.0-0.112-8.mga5.x86_64 * unselecting system-config-printer-1.5.5-5.mga5.x86_64 * requiring polkit[== 0.112-8.mga5] for lib64polkit1_0-0.112-8.mga5.x86_64 * chosen polkit-0.112-8.mga5.x86_64 for polkit[== 0.112-8.mga5] * the more recent polkit-0.113-1.mga4.x86_64 is installed, but does not provide polkit[== 0.112-8.mga5] whereas polkit-0.112-8.mga5.x86_64 does * selecting polkit-0.112-8.mga5.x86_64 * unselecting polkit-0.112-8.mga5.x86_64 * set_rejected: polkit-desktop-policy-0.112-2.mga4.noarch * transaction valid: remove=python-cups-1.9.66-1.mga4.x86_64 update=python3-cups,python3-six,kdm-handbook,system-config-printer-udev,python3-curl,kipi-plugins-advancedslideshow,lib64caja-extension1,lib64oxygen-gtk,oxygen-gtk,python3-dbus,python3-urllib3,python3-requests,system-config-printer-libs,python3-chardet * selecting cups-filters-1.0.67-1.mga5.x86_64 * set_rejected: foomatic-filters-4.0.17-2.mga4.x86_64 * requiring lib64cups-filters1[== 1.0.67-1.mga5],libcupsfilters.so.1()(64bit),libfontembed.so.1()(64bit) for cups-filters-1.0.67-1.mga5.x86_64 * chosen lib64cups-filters1-1.0.67-1.mga5.x86_64 for libfontembed.so.1()(64bit) * selecting lib64cups-filters1-1.0.67-1.mga5.x86_64 * chosen lib64cups-filters1-1.0.67-1.mga5.x86_64 for lib64cups-filters1[== 1.0.67-1.mga5] * chosen lib64cups-filters1-1.0.67-1.mga5.x86_64 for libcupsfilters.so.1()(64bit) * selecting net_monitor-0.20-1.mga5.x86_64 * set_rejected: net_monitor-0.17-1.mga4.x86_64 * selecting open-1.4-26.mga5.x86_64 * set_rejected: open-1.4-24.mga4.x86_64 * installed system-config-printer-libs-1.4.3-1.2.mga4.x86_64 is conflicting because of unsatisfied foomatic * promoting system-config-printer-libs-1.5.5-5.mga5.noarch because of conflict above * transaction valid: remove= update=cups-filters,open,net_monitor,lib64cups-filters1 * scheduled sets of transactions: remove=1=python-cups-1.9.66-1.mga4.x86_64 update=14=python3-cups,python3-six,kdm-handbook,system-config-printer-udev,python3-curl,kipi-plugins-advancedslideshow,lib64caja-extension1,lib64oxygen-gtk,oxygen-gtk,python3-dbus,python3-urllib3,python3-requests,system-config-printer-libs,python3-chardet remove=0= update=4=cups-filters,open,net_monitor,lib64cups-filters1 * opening rpmdb (root=/mnt, write=1) * trans: scheduling removal of python-cups-1.9.66-1.mga4.x86_64 * trans: scheduling update of python3-chardet-2.2.1-4.mga5.noarch (id=1452, file=/tmp/image/media/core/python3-chardet-2.2.1-4.mga5.noarch.rpm) * trans: scheduling update of lib64oxygen-gtk-1.4.6-2.mga5.x86_64 (id=2776, file=/tmp/image/media/core/lib64oxygen-gtk-1.4.6-2.mga5.x86_64.rpm) * trans: scheduling update of kipi-plugins-advancedslideshow-4.8.0-1.mga5.x86_64 (id=482, file=/tmp/image/media/core/kipi-plugins-advancedslideshow-4.8.0-1.mga5.x86_64.rpm) * trans: scheduling update of lib64caja-extension1-1.8.2-4.mga5.x86_64 (id=488, file=/tmp/image/media/core/lib64caja-extension1-1.8.2-4.mga5.x86_64.rpm) * trans: scheduling update of system-config-printer-libs-1.5.5-5.mga5.noarch (id=2346, file=/tmp/image/media/core/system-config-printer-libs-1.5.5-5.mga5.noarch.rpm) * trans: scheduling update of python3-curl-7.19.5-4.mga5.x86_64 (id=726, file=/tmp/image/media/core/python3-curl-7.19.5-4.mga5.x86_64.rpm) * trans: scheduling update of python3-requests-2.3.0-5.mga5.noarch (id=2878, file=/tmp/image/media/core/python3-requests-2.3.0-5.mga5.noarch.rpm) * trans: scheduling update of python3-six-1.7.3-4.mga5.noarch (id=1137, file=/tmp/image/media/core/python3-six-1.7.3-4.mga5.noarch.rpm) * trans: scheduling update of python3-cups-1.9.68-3.mga5.x86_64 (id=2162, file=/tmp/image/media/core/python3-cups-1.9.68-3.mga5.x86_64.rpm) * trans: scheduling update of oxygen-gtk-1.4.6-2.mga5.x86_64 (id=485, file=/tmp/image/media/core/oxygen-gtk-1.4.6-2.mga5.x86_64.rpm) * trans: scheduling update of python3-dbus-1.2.0-12.mga5.x86_64 (id=2378, file=/tmp/image/media/core/python3-dbus-1.2.0-12.mga5.x86_64.rpm) * trans: scheduling update of python3-urllib3-1.9-5.mga5.noarch (id=3002, file=/tmp/image/media/core/python3-urllib3-1.9-5.mga5.noarch.rpm) * trans: scheduling update of system-config-printer-udev-1.5.5-5.mga5.x86_64 (id=494, file=/tmp/image/media/core/system-config-printer-udev-1.5.5-5.mga5.x86_64.rpm) * trans: scheduling update of kdm-handbook-4.11.16-5.mga5.noarch (id=487, file=/tmp/image/media/core/kdm-handbook-4.11.16-5.mga5.noarch.rpm) * workaround bug in rpmlib by removing /mnt/var/lib/rpm/__db* * opening rpmdb (root=/mnt, write=1) * trans: scheduling update of cups-filters-1.0.67-1.mga5.x86_64 (id=2036, file=/tmp/image/media/core/cups-filters-1.0.67-1.mga5.x86_64.rpm) * trans: scheduling update of lib64cups-filters1-1.0.67-1.mga5.x86_64 (id=3367, file=/tmp/image/media/core/lib64cups-filters1-1.0.67-1.mga5.x86_64.rpm) * trans: scheduling update of net_monitor-0.20-1.mga5.x86_64 (id=2067, file=/tmp/image/media/core/net_monitor-0.20-1.mga5.x86_64.rpm) * trans: scheduling update of open-1.4-26.mga5.x86_64 (id=2081, file=/tmp/image/media/core/open-1.4-26.mga5.x86_64.rpm) * workaround bug in rpmlib by removing /mnt/var/lib/rpm/__db* * 2 installation transactions failed * system-config-printer-libs = 1.4.3-1.2.mga4 is needed by (installed) system-config-printer-1.4.3-1.2.mga4.x86_64 system-config-printer-udev = 1.4.3-1.2.mga4 is needed by (installed) system-config-printer-1.4.3-1.2.mga4.x86_64 foomatic is needed by (installed) system-config-printer-libs-1.4.3-1.2.mga4.x86_64 * transactions done, now trying to close still opened fd; exit code=12 matchbox-wm: X error warning (0xa00d36): 140 (opcode: 138) * closing install.log file * writeandclean_ldsoconf * Install took: 0:00:12 * running: ldconfig with root /mnt * step "installPackages" took: 0:00:15 * step "installPackages" failed with error: Installation failed at /usr/lib/libDrakX/install/steps.pm line 450. * error: Installation failed at /usr/lib/libDrakX/install/steps.pm line 450. * running: /sbin/modprobe sd_mod * running: /sbin/modprobe dm_mirror * running: /sbin/modprobe dm_zero * running: dmraid -s -c -i * running: dmraid -s -c -c * _raid_devices_raw * running: dmraid -d -s -c -c * running: dmraid -r -c -c * dmraid: * using dmraid on * HDIO_GETGEO on /dev/sda succeeded: heads=255 sectors=63 cylinders=60801 start=0 * HDIO_GETGEO on /dev/sdb succeeded: heads=8 sectors=62 cylinders=1015 start=0 * id2hd: 0x3a0712b0=>sda 0x07664d8a=>sdb * id2edd: 0x3a0712b0=>/sys/firmware/edd/int13_dev80 * geometry_from_edd sda 0x3a0712b0: 60801/255/63 * test_for_bad_drives(/dev/sda on sector #62) * running: blkid -o udev -p /dev/sda * running: blkid -o udev -p /dev/sda * found a dos partition table on /dev/sda at sector 0 * guess_geometry_from_partition_table sda: 60801/255/63 * is_geometry_valid_for_the_partition_table failed for (sda3, 512425312): 1023,254,62 vs 1023,0,7 with geometry 60801/255/63 * running: blkid -o udev -p /dev/sda1 * blkid gave: ntfs-3g 166EA9506EA92987 SYSTEM * running: blkid -o udev -p /dev/sda2 * blkid gave: ntfs-3g A8B29A13B299E65A * running: blkid -o udev -p /dev/sda3 * blkid gave: ntfs-3g F882C1EC82C1B004 Recovery * running: blkid -o udev -p /dev/sda5 * blkid gave: vfat 98F1-3773 HP_TOOLS * running: blkid -o udev -p /dev/sda6 * blkid gave: ext4 4ff5a8af-5f19-461c-b0fe-b8fc7c46b48c * running: blkid -o udev -p /dev/sda7 * blkid gave: swap a3ac7bc9-3f12-47cd-ba59-72c0382a3bd0 * running: blkid -o udev -p /dev/sda8 * blkid gave: ext4 6d15605b-0c91-44bb-80eb-c9ccdc10269e * running: blkid -o udev -p /dev/sda9 * blkid gave: ext4 61d4819c-60cb-4c86-a36a-fc3a99fa04dd * running: blkid -o udev -p /dev/sda10 * blkid gave: ext4 6de9bcc6-8baa-4d6b-8d54-df05024d911a * running: blkid -o udev -p /dev/loop0 * blkid gave: squashfs * running: blkid -o udev -p /dev/sdb1 * blkid gave: vfat 001B-9622 * running: udevadm settle * running: blkid -o udev -p /dev/sda1 * blkid gave: ntfs-3g 166EA9506EA92987 SYSTEM * running: blkid -o udev -p /dev/sda2 * blkid gave: ntfs-3g A8B29A13B299E65A * running: blkid -o udev -p /dev/sda3 * blkid gave: ntfs-3g F882C1EC82C1B004 Recovery * running: blkid -o udev -p /dev/sda5 * blkid gave: vfat 98F1-3773 HP_TOOLS * running: blkid -o udev -p /dev/sda6 * blkid gave: ext4 4ff5a8af-5f19-461c-b0fe-b8fc7c46b48c * running: blkid -o udev -p /dev/sda7 * blkid gave: swap a3ac7bc9-3f12-47cd-ba59-72c0382a3bd0 * running: blkid -o udev -p /dev/sda8 * blkid gave: ext4 6d15605b-0c91-44bb-80eb-c9ccdc10269e * running: blkid -o udev -p /dev/sda9 * blkid gave: ext4 61d4819c-60cb-4c86-a36a-fc3a99fa04dd * running: blkid -o udev -p /dev/sda10 * blkid gave: ext4 6de9bcc6-8baa-4d6b-8d54-df05024d911a * test_for_bad_drives(/dev/sdb on sector #61) * running: blkid -o udev -p /dev/sdb * running: blkid -o udev -p /dev/sdb * found a dos partition table on /dev/sdb at sector 0 * guess_geometry_from_partition_table sdb: 983/16/32 * is_geometry_valid_for_the_partition_table failed for (sdb1, 32): 0,1,0 vs 0,0,32 with geometry 1015/8/62 * is_geometry_valid_for_the_partition_table failed for (sdb1, 503806): 1023,15,31 vs 1015,5,56 with geometry 1015/8/62 * is_geometry_valid_for_the_partition_table failed for (sdb1, 503806): 1023,15,31 vs 983,15,30 with geometry 983/16/32 * sdb: argh! no valid geometry found * running: blkid -o udev -p /dev/sda1 * blkid gave: ntfs-3g 166EA9506EA92987 SYSTEM * running: blkid -o udev -p /dev/sda2 * blkid gave: ntfs-3g A8B29A13B299E65A * running: blkid -o udev -p /dev/sda3 * blkid gave: ntfs-3g F882C1EC82C1B004 Recovery * running: blkid -o udev -p /dev/sda5 * blkid gave: vfat 98F1-3773 HP_TOOLS * running: blkid -o udev -p /dev/sda6 * blkid gave: ext4 4ff5a8af-5f19-461c-b0fe-b8fc7c46b48c * running: blkid -o udev -p /dev/sda7 * blkid gave: swap a3ac7bc9-3f12-47cd-ba59-72c0382a3bd0 * running: blkid -o udev -p /dev/sda8 * blkid gave: ext4 6d15605b-0c91-44bb-80eb-c9ccdc10269e * running: blkid -o udev -p /dev/sda9 * blkid gave: ext4 61d4819c-60cb-4c86-a36a-fc3a99fa04dd * running: blkid -o udev -p /dev/sda10 * blkid gave: ext4 6de9bcc6-8baa-4d6b-8d54-df05024d911a * running: blkid -o udev -p /dev/loop0 * blkid gave: squashfs * running: blkid -o udev -p /dev/sdb1 * blkid gave: vfat 001B-9622 * running: udevadm settle * running: blkid -o udev -p /dev/sdb1 * blkid gave: vfat 001B-9622 * running: /sbin/modprobe floppy modprobe: ERROR: could not insert 'floppy': No such device * running: /sbin/modprobe -n floppy * mounting /dev/sdb1 on /fd as type vfat, options * running: mount -t vfat /dev/sdb1 /fd -o check=relaxed * running: monitor-edid -v --perl ******************************************************************************** * install.log ******************************************************************************** installing python3-chardet-2.2.1-4.mga5.noarch.rpm lib64oxygen-gtk-1.4.6-2.mga5.x86_64.rpm kipi-plugins-advancedslideshow-4.8.0-1.mga5.x86_64.rpm lib64caja-extension1-1.8.2-4.mga5.x86_64.rpm system-config-printer-libs-1.5.5-5.mga5.noarch.rpm python3-curl-7.19.5-4.mga5.x86_64.rpm python3-requests-2.3.0-5.mga5.noarch.rpm python3-six-1.7.3-4.mga5.noarch.rpm python3-cups-1.9.68-3.mga5.x86_64.rpm oxygen-gtk-1.4.6-2.mga5.x86_64.rpm python3-dbus-1.2.0-12.mga5.x86_64.rpm python3-urllib3-1.9-5.mga5.noarch.rpm system-config-printer-udev-1.5.5-5.mga5.x86_64.rpm kdm-handbook-4.11.16-5.mga5.noarch.rpm from /tmp/image/media/core starting installing packages created transaction for installing on /mnt (remove=1, install=0, upgrade=14) Installation failed: system-config-printer-libs = 1.4.3-1.2.mga4 is needed by (installed) system-config-printer-1.4.3-1.2.mga4.x86_64 system-config-printer-udev = 1.4.3-1.2.mga4 is needed by (installed) system-config-printer-1.4.3-1.2.mga4.x86_64 installing cups-filters-1.0.67-1.mga5.x86_64.rpm lib64cups-filters1-1.0.67-1.mga5.x86_64.rpm net_monitor-0.20-1.mga5.x86_64.rpm open-1.4-26.mga5.x86_64.rpm from /tmp/image/media/core starting installing packages created transaction for installing on /mnt (remove=0, install=0, upgrade=4) Installation failed: foomatic is needed by (installed) system-config-printer-libs-1.4.3-1.2.mga4.x86_64 Installation failed: system-config-printer-libs = 1.4.3-1.2.mga4 is needed by (installed) system-config-printer-1.4.3-1.2.mga4.x86_64 system-config-printer-udev = 1.4.3-1.2.mga4 is needed by (installed) system-config-printer-1.4.3-1.2.mga4.x86_64 foomatic is needed by (installed) system-config-printer-libs-1.4.3-1.2.mga4.x86_64 ******************************************************************************** * fstab ******************************************************************************** # Entry for /dev/sda8 : UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e / ext4 noatime,acl 1 1 # Entry for /dev/sda6 : UUID=4ff5a8af-5f19-461c-b0fe-b8fc7c46b48c /boot ext4 noatime,acl 1 2 # Entry for /dev/sda10 : UUID=6de9bcc6-8baa-4d6b-8d54-df05024d911a /home ext4 noatime,acl 1 2 # Entry for /dev/sda1 : UUID=166EA9506EA92987 /media/win_c ntfs-3g defaults,umask=000 0 0 # Entry for /dev/sda5 : UUID=98F1-3773 /media/win_d vfat umask=000,iocharset=utf8 0 0 # Entry for /dev/sda2 : UUID=A8B29A13B299E65A /media/win_e ntfs-3g defaults,umask=000 0 0 # Entry for /dev/sda3 : UUID=F882C1EC82C1B004 /media/win_f ntfs-3g defaults,umask=000 0 0 # Entry for /dev/sda9 : UUID=61d4819c-60cb-4c86-a36a-fc3a99fa04dd /opt ext4 acl,noatime 1 2 none /proc proc defaults 0 0 # Entry for /dev/sda7 : UUID=a3ac7bc9-3f12-47cd-ba59-72c0382a3bd0 swap swap defaults 0 0 ******************************************************************************** * modprobe.conf ******************************************************************************** install usb-interface /sbin/modprobe ehci_hcd; /sbin/modprobe ehci_pci; /sbin/modprobe ohci_hcd; /sbin/modprobe ohci_pci; /bin/true options snd-ac97-codec power_save=1 alias sound-slot-1 snd_hda_intel alias sound-slot-0 snd_hda_intel alias pci:v000010ECd00008168sv0000103Csd00003387bc02sc00i00 r8169 alias eno1 r8169 ******************************************************************************** * lilo.conf ******************************************************************************** ******************************************************************************** * grub: menu.lst ******************************************************************************** timeout 10 color black/cyan yellow/cyan gfxmenu (hd0,5)/gfxmenu default 0 title linux kernel (hd0,5)/vmlinuz BOOT_IMAGE=linux root=UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e nokmsboot splash quiet resume=UUID=a3ac7bc9-3f12-47cd-ba59-72c0382a3bd0 vga=788 root (hd0,5) initrd /initrd.img title linux-nonfb kernel (hd0,5)/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e nokmsboot resume=UUID=a3ac7bc9-3f12-47cd-ba59-72c0382a3bd0 root (hd0,5) initrd /initrd.img title failsafe kernel (hd0,5)/vmlinuz BOOT_IMAGE=failsafe root=UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e nokmsboot failsafe root (hd0,5) initrd /initrd.img title windows root (hd0,0) makeactive chainloader +1 title desktop 3.12.8-2.mga4 kernel (hd0,5)/vmlinuz-3.12.8-desktop-2.mga4 BOOT_IMAGE=desktop_3.12.8-2.mga4 root=UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e nokmsboot splash quiet resume=UUID=a3ac7bc9-3f12-47cd-ba59-72c0382a3bd0 vga=788 root (hd0,5) initrd /initrd-3.12.8-desktop-2.mga4.img title desktop 3.12.9-1.mga4 kernel (hd0,5)/vmlinuz-3.12.9-desktop-1.mga4 BOOT_IMAGE=desktop_3.12.9-1.mga4 root=UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e nokmsboot splash quiet resume=UUID=a3ac7bc9-3f12-47cd-ba59-72c0382a3bd0 vga=788 root (hd0,5) initrd /initrd-3.12.9-desktop-1.mga4.img title desktop 3.12.20-1.mga4 kernel (hd0,5)/vmlinuz-3.12.20-desktop-1.mga4 BOOT_IMAGE=desktop_3.12.20-1.mga4 root=UUID=6d15605b-0c91-44bb-80eb-c9ccdc10269e nokmsboot splash quiet resume=UUID=a3ac7bc9-3f12-47cd-ba59-72c0382a3bd0 vga=788 root (hd0,5) initrd /initrd-3.12.20-desktop-1.mga4.img ******************************************************************************** * grub: install.sh ******************************************************************************** grub --device-map=/boot/grub/device.map --batch </ (resolution switching) Option "DontZap" "False" # disable (server abort) AllowMouseOpenFail # allows the server to start up even if the mouse does not work EndSection Section "Module" Load "v4l" # Video for Linux EndSection Section "Monitor" Identifier "monitor1" VendorName "Plug'n Play" EndSection Section "Device" Identifier "device1" VendorName "Advanced Micro Devices, Inc. [AMD/ATI]" BoardName "ATI Radeon HD 5000 to HD 6300 (radeon/fglrx)" Driver "fglrx" Option "DPMS" EndSection Section "Screen" Identifier "screen1" Device "device1" Monitor "monitor1" EndSection Section "ServerLayout" Identifier "layout1" Screen "screen1" EndSection ******************************************************************************** * urpmi.cfg ******************************************************************************** { } Core\ Release cdrom://x86_64/media/core { key-ids: 80420f66 } Nonfree\ Release cdrom://x86_64/media/nonfree { key-ids: 80420f66 } ******************************************************************************** * modprobe.preload ******************************************************************************** # /etc/modprobe.preload: kernel modules to load at boot time. # # This file should contain the names of kernel modules that are # to be loaded at boot time, one per line. Comments begin with # a `#', and everything on the line after them are ignored. # this file is for module-init-tools (kernel 2.5 and above) ONLY # for old kernel use /etc/modules nvram evdev ******************************************************************************** * sysconfig/i18n ******************************************************************************** LC_COLLATE=fr_FR.UTF-8 LC_PAPER=fr_FR.UTF-8 LC_CTYPE=fr_FR.UTF-8 LC_MONETARY=fr_FR.UTF-8 LC_TIME=fr_FR.UTF-8 LC_TELEPHONE=fr_FR.UTF-8 LC_NAME=fr_FR.UTF-8 SYSFONT=lat0-16 LANGUAGE=fr_FR.UTF-8:fr LC_MESSAGES=fr_FR.UTF-8 LC_NUMERIC=fr_FR.UTF-8 LC_MEASUREMENT=fr_FR.UTF-8 LC_IDENTIFICATION=fr_FR.UTF-8 LC_ADDRESS=fr_FR.UTF-8 LANG=fr_FR.UTF-8 ******************************************************************************** * locale.conf ******************************************************************************** ******************************************************************************** * /proc/iomem ******************************************************************************** 00000000-00000fff : reserved 00001000-0009f7ff : System RAM 0009f800-0009ffff : reserved 000a0000-000bffff : PCI Bus 0000:00 000c0000-000ce3ff : Video ROM 000c0000-000c3fff : PCI Bus 0000:00 000c4000-000c7fff : PCI Bus 0000:00 000c8000-000cbfff : PCI Bus 0000:00 000d0000-000d3fff : PCI Bus 0000:00 000d4000-000d7fff : PCI Bus 0000:00 000d8000-000dbfff : PCI Bus 0000:00 000dc000-000dffff : PCI Bus 0000:00 000e0000-000fffff : reserved 000e0000-000e3fff : PCI Bus 0000:00 000e4000-000e7fff : PCI Bus 0000:00 000e8000-000ebfff : PCI Bus 0000:00 000ec000-000effff : PCI Bus 0000:00 000f0000-000fffff : System ROM 00100000-df9befff : System RAM 01000000-016ccb51 : Kernel code 016ccb52-01d106bf : Kernel data 01e61000-01f2cfff : Kernel bss df9bf000-dfabefff : reserved dfabf000-dfbbefff : ACPI Non-volatile Storage dfbbf000-dfbf4fff : ACPI Tables dfbf5000-dfbfffff : System RAM dfc00000-dfffffff : reserved e0000000-f7ffffff : PCI Bus 0000:00 e0000000-efffffff : 0000:00:01.0 e0000000-e0ffffff : vesafb f0000000-f00fffff : PCI Bus 0000:03 f0100000-f01fffff : PCI Bus 0000:07 f0100000-f0103fff : 0000:07:00.0 f0100000-f0103fff : r8169 f0104000-f0104fff : 0000:07:00.0 f0104000-f0104fff : r8169 f0200000-f02fffff : PCI Bus 0000:03 f0200000-f0203fff : 0000:03:00.0 f0200000-f0203fff : bcma-pci-bridge f0300000-f033ffff : 0000:00:01.0 f0340000-f0343fff : 0000:00:14.2 f0344000-f0347fff : 0000:00:01.1 f0348000-f03480ff : 0000:00:16.2 f0348000-f03480ff : ehci_hcd f0349000-f0349fff : 0000:00:16.0 f0349000-f0349fff : ohci_hcd f034a000-f034a0ff : 0000:00:13.2 f034a000-f034a0ff : ehci_hcd f034b000-f034bfff : 0000:00:13.0 f034b000-f034bfff : ohci_hcd f034c000-f034c0ff : 0000:00:12.2 f034c000-f034c0ff : ehci_hcd f034d000-f034dfff : 0000:00:12.0 f034d000-f034dfff : ohci_hcd f034e000-f034e3ff : 0000:00:11.0 f034e000-f034e3ff : ahci f0400000-f05fffff : PCI Bus 0000:01 f0600000-f07fffff : PCI Bus 0000:01 f8000000-fbffffff : PCI MMCONFIG 0000 [bus 00-3f] f8000000-fbffffff : reserved fc000000-fed3ffff : PCI Bus 0000:00 fec00000-fec00fff : reserved fec00000-fec003ff : IOAPIC 0 fec10000-fec10fff : reserved fed00000-fed003ff : HPET 0 fed00000-fed003ff : PNP0103:00 fed45000-ffffffff : PCI Bus 0000:00 fee00000-fee00fff : Local APIC fee00000-fee00fff : reserved fee00000-fee00fff : pnp 00:00 ffe00000-ffffffff : reserved ffe00000-ffffffff : pnp 00:05 100000000-106ffffff : System RAM 107000000-11effffff : reserved ******************************************************************************** * /proc/ioport ******************************************************************************** 0000-0cf7 : PCI Bus 0000:00 0000-001f : dma1 0020-0021 : pic1 0040-0043 : timer0 0050-0053 : timer1 0060-0060 : keyboard 0061-0061 : PNP0800:00 0062-0062 : PNP0C09:00 0062-0062 : EC data 0064-0064 : keyboard 0066-0066 : PNP0C09:00 0066-0066 : EC cmd 0070-0071 : rtc0 0080-008f : dma page reg 00a0-00a1 : pic2 00c0-00df : dma2 00f0-00ff : fpu 00f0-00fe : PNP0C04:00 0380-0387 : pnp 00:04 03c0-03df : vesafb 0400-0403 : ACPI PM1a_EVT_BLK 0404-0405 : ACPI PM1a_CNT_BLK 0408-040b : ACPI PM_TMR 0410-0415 : ACPI CPU throttle 0420-0427 : ACPI GPE0_BLK 04d0-04d1 : pnp 00:04 04d6-04d6 : pnp 00:04 0680-06ff : pnp 00:04 077a-077a : pnp 00:04 0800-0800 : ACPI PM2_CNT_BLK 0b00-0b07 : piix4_smbus 0b20-0b27 : piix4_smbus 0c00-0c01 : pnp 00:04 0c14-0c14 : pnp 00:04 0c50-0c52 : pnp 00:04 0c6c-0c6c : pnp 00:04 0c6f-0c6f : pnp 00:04 0cd0-0cdb : pnp 00:04 0cf8-0cff : PCI conf1 0d00-ffff : PCI Bus 0000:00 1000-1fff : PCI Bus 0000:01 2000-2fff : PCI Bus 0000:07 2000-20ff : 0000:07:00.0 2000-20ff : r8169 3000-3fff : PCI Bus 0000:03 4000-40ff : 0000:00:01.0 4100-410f : 0000:00:11.0 4100-410f : ahci 4110-4117 : 0000:00:11.0 4110-4117 : ahci 4118-411f : 0000:00:11.0 4118-411f : ahci 4120-4123 : 0000:00:11.0 4120-4123 : ahci 4124-4127 : 0000:00:11.0 4124-4127 : ahci ******************************************************************************** * auto_inst ******************************************************************************** #!/usr/bin/perl -cw # !! This file has been simplified to respect privacy when reporting problems. # You should use /root/drakx/auto_inst.cfg.pl instead !! # # You should check the syntax of this file before using it in an auto-install. # You can do this with 'perl -cw auto_inst.cfg.pl' or by executing this file # (note the '#!/usr/bin/perl -cw' on the first line). $o = { 'partitions' => [], 'superuser' => {}, 'autoExitInstall' => 1, 'users' => [], 'default_packages' => [], 'partitioning' => { 'auto_allocate' => 1 } };