$ lspcidrake -v bt878 : Brooktree Corporation|Bt878 Audio Capture [MULTIMEDIA_OTHER] (vendor:109e device:0878 subv:0070 subd:13eb) (rev: 11) bttv : Brooktree Corporation|Bt878 Video Capture [MULTIMEDIA_VIDEO] (vendor:109e device:036e subv:0070 subd:13eb) (rev: 11) r8169 : Realtek Semiconductor Co., Ltd.|RTL8111/8168B PCI Express Gigabit Ethernet controller [NETWORK_ETHERNET] (vendor:10ec device:8168 subv:1043 subd:8367) (rev: 02) snd_hda_intel : ATI Technologies Inc|RV620 HDMI Audio [Radeon HD 3400 Series] (vendor:1002 device:aa28 subv:174b subd:aa28) Card:ATI Radeon HD 2000 to HD 6300 (radeon/fglrx): ATI Technologies Inc|RV620 LE [Radeon HD 3450] [DISPLAY_VGA] (vendor:1002 device:95c5 subv:174b subd:e400) unknown : Advanced Micro Devices [AMD]|Family 10h Processor Link Control [BRIDGE_HOST] (vendor:1022 device:1204) k10temp : Advanced Micro Devices [AMD]|Family 10h Processor Miscellaneous Control [BRIDGE_HOST] (vendor:1022 device:1203) amd64_edac_mod : Advanced Micro Devices [AMD]|Family 10h Processor DRAM Controller [BRIDGE_HOST] (vendor:1022 device:1202) unknown : Advanced Micro Devices [AMD]|Family 10h Processor Address Map [BRIDGE_HOST] (vendor:1022 device:1201) unknown : Advanced Micro Devices [AMD]|Family 10h Processor HyperTransport Configuration [BRIDGE_HOST] (vendor:1022 device:1200) ohci_hcd : ATI Technologies Inc|SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [SERIAL_USB] (vendor:1002 device:4399 subv:1043 subd:8389) unknown : ATI Technologies Inc|SBx00 PCI to PCI Bridge [BRIDGE_PCI] (vendor:1002 device:4384) unknown : ATI Technologies Inc|SB7x0/SB8x0/SB9x0 LPC host controller [BRIDGE_ISA] (vendor:1002 device:439d subv:1043 subd:8389) snd_hda_intel : ATI Technologies Inc|SBx00 Azalia (Intel HDA) (vendor:1002 device:4383 subv:1043 subd:82ea) pata_atiixp : ATI Technologies Inc|SB7x0/SB8x0/SB9x0 IDE Controller [STORAGE_IDE] (vendor:1002 device:439c subv:1043 subd:8389) sp5100_tco : ATI Technologies Inc|SBx00 SMBus Controller [SERIAL_SMBUS] (vendor:1002 device:4385 subv:1043 subd:8389) (rev: 3c) ehci_hcd : ATI Technologies Inc|SB7x0/SB8x0/SB9x0 USB EHCI Controller [SERIAL_USB] (vendor:1002 device:4396 subv:1043 subd:8389) ohci_hcd : ATI Technologies Inc|SB7x0 USB OHCI1 Controller [SERIAL_USB] (vendor:1002 device:4398 subv:1043 subd:8389) ohci_hcd : ATI Technologies Inc|SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [SERIAL_USB] (vendor:1002 device:4397 subv:1043 subd:8389) ehci_hcd : ATI Technologies Inc|SB7x0/SB8x0/SB9x0 USB EHCI Controller [SERIAL_USB] (vendor:1002 device:4396 subv:1043 subd:8389) ohci_hcd : ATI Technologies Inc|SB7x0 USB OHCI1 Controller [SERIAL_USB] (vendor:1002 device:4398 subv:1043 subd:8389) ohci_hcd : ATI Technologies Inc|SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [SERIAL_USB] (vendor:1002 device:4397 subv:1043 subd:8389) ahci : ATI Technologies Inc|SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [STORAGE_SATA] (vendor:1002 device:4390 subv:1043 subd:8389) shpchp : Advanced Micro Devices [AMD]|RS780 PCI to PCI bridge (PCIE port 2) [BRIDGE_PCI] (vendor:1022 device:9606) shpchp : Advanced Micro Devices [AMD]|RS780 PCI to PCI bridge (ext gfx port 0) [BRIDGE_PCI] (vendor:1022 device:9603) unknown : Advanced Micro Devices [AMD]|RS780 Host Bridge [BRIDGE_HOST] (vendor:1022 device:9600 subv:1043 subd:8388) hub : Linux 3.3.1-desktop-2.mga2 ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0002) usb_storage : Generic|Mass Storage Device [Mass Storage|SCSI|Bulk-Only] (vendor:058f device:6364) hub : Linux 3.3.1-desktop-2.mga2 ehci_hcd|EHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0002) hub : Genesys Logic, Inc.|USB2.0 Hub [Hub|Unused|Full speed (or root) hub] (vendor:05e3 device:0608) hub : Linux 3.3.1-desktop-2.mga2 ohci_hcd|OHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0001) hub : Linux 3.3.1-desktop-2.mga2 ohci_hcd|OHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0001) cdc_acm : CUSTT13|CUSTT13 Development Platform [Communications|Abstract (modem)|AT-commands (v.25ter)] (vendor:04e8 device:663f) hub : Linux 3.3.1-desktop-2.mga2 ohci_hcd|OHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0001) hub : Linux 3.3.1-desktop-2.mga2 ohci_hcd|OHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0001) hub : Broadcom|BCM2046B1 [Hub|Unused|Full speed (or root) hub] (vendor:0a5c device:4500) usbhid : Broadcom Corp.|Keyboard (Boot Interface Subclass) [Human Interface Device|Boot Interface Subclass|Keyboard] (vendor:0a5c device:4502) usbhid : Broadcom Corp.|Mouse (Boot Interface Subclass) [Human Interface Device|Boot Interface Subclass|Mouse] (vendor:0a5c device:4503) btusb : Broadcom Corp|BLUETOOTH USB +EDR ADAPTER Class 1 v2.1 UHE [Wireless|Radio Frequency|Bluetooth] (vendor:050d device:0017) usbhid : Microsoft |Microsoft Basic Optical Mouse [Human Interface Device|Boot Interface Subclass|Mouse] (vendor:045e device:0084) usbhid : Microsoft|Wired Keyboard 600 [Human Interface Device|Boot Interface Subclass|Keyboard] (vendor:045e device:0750) hub : Linux 3.3.1-desktop-2.mga2 ohci_hcd|OHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0001) scanner : EPSON|EPSON Scanner (vendor:04b8 device:0110) aiptek : AIPTEK|APT-6000U [Human Interface Device|Boot Interface Subclass|Mouse] (vendor:08ca device:0020) $ dmesg [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.3.1-desktop-2.mga2 (iurt@jonund.mageia.org) (gcc version 4.6.3 (GCC) ) #1 SMP Wed Apr 4 09:44:49 UTC 2012 [ 0.000000] Command line: BOOT_IMAGE=linux root=UUID=f7de12ae-90d0-43b9-9007-78de70e8d163 nokmsboot splash quiet resume=UUID=06dd1537-9c61-41cc-84a3-8fa60577b660 vga=788 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff8e000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] DMI: System manufacturer System Product Name/M3A76-CM, BIOS 1001 07/09/2009 [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000130000000 aka 4864M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff80000 page 4k [ 0.000000] kernel direct mapping tables up to cff80000 @ 1fffd000-20000000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000 [ 0.000000] 0100000000 - 0130000000 page 2M [ 0.000000] kernel direct mapping tables up to 130000000 @ cff7e000-cff80000 [ 0.000000] RAMDISK: 36f77000 - 37ff0000 [ 0.000000] ACPI: RSDP 00000000000fb520 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000cff80100 0004C (v01 070909 XSDT1440 20090709 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff80290 000F4 (v03 070909 FACP1440 20090709 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff805c0 0A703 (v01 A1263 A1263001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cff8e000 00040 [ 0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 070909 OEMMCFG 20090709 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cff8e040 00071 (v01 070909 OEMB1440 20090709 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cff8acd0 00038 (v01 070909 OEMHPET 20090709 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff8ad10 00458 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] Scanning NUMA topology in Northbridge 24 [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000130000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000130000000 [ 0.000000] NODE_DATA [000000012fffb000 - 000000012fffffff] [ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012b600000-ffff88012f5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00130000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] Early memory PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff80 [ 0.000000] 0: 0x00100000 -> 0x00130000 [ 0.000000] On node 0 totalpages: 1048334 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 5 pages reserved [ 0.000000] DMA zone: 3913 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 831424 pages, LIFO batch:31 [ 0.000000] Normal zone: 3072 pages used for memmap [ 0.000000] Normal zone: 193536 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: No APIC-table, disabling MPS [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 16 [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000 [ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffd0000 [ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000 [ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000) [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88012fc00000 s81408 r8192 d20992 u2097152 [ 0.000000] pcpu-alloc: s81408 r8192 d20992 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1028873 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=linux root=UUID=f7de12ae-90d0-43b9-9007-78de70e8d163 nokmsboot splash quiet resume=UUID=06dd1537-9c61-41cc-84a3-8fa60577b660 vga=788 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ c4000000 size 32 MB [ 0.000000] Aperture pointing to e820 RAM. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 3966340k/4980736k available (4498k kernel code, 787400k absent, 226996k reserved, 6386k data, 748k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:256 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] allocated 16777216 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3000.335 MHz processor. [ 0.001002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6000.67 BogoMIPS (lpj=3000335) [ 0.001006] pid_max: default: 32768 minimum: 301 [ 0.001023] Security Framework initialized [ 0.001033] TOMOYO Linux initialized [ 0.002220] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.003520] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.004128] Mount-cache hash table entries: 256 [ 0.004231] Initializing cgroup subsys cpuacct [ 0.004233] Initializing cgroup subsys memory [ 0.004240] Initializing cgroup subsys devices [ 0.004242] Initializing cgroup subsys freezer [ 0.004243] Initializing cgroup subsys net_cls [ 0.004245] Initializing cgroup subsys blkio [ 0.004269] tseg: 0000000000 [ 0.004280] CPU: Physical Processor ID: 0 [ 0.004282] CPU: Processor Core ID: 0 [ 0.004283] mce: CPU supports 6 MCE banks [ 0.004291] using AMD E400 aware idle routine [ 0.004327] SMP alternatives: switching to UP code [ 0.008014] Freeing SMP alternatives: 16k freed [ 0.008019] ACPI: Checking initramfs for custom DSDT [ 0.119556] ACPI: Core revision 20120111 [ 0.121997] ACPI: setting ELCR to 0200 (from 0c00) [ 0.122995] ftrace: allocating 17336 entries in 68 pages [ 0.127043] weird, boot CPU (#0) not listed by the BIOS. [ 0.127045] SMP motherboard not detected. [ 0.127988] SMP disabled [ 0.127988] Performance Events: AMD PMU driver. [ 0.127988] ... version: 0 [ 0.127988] ... bit width: 48 [ 0.127988] ... generic registers: 4 [ 0.127988] ... value mask: 0000ffffffffffff [ 0.127988] ... max period: 00007fffffffffff [ 0.127988] ... fixed-purpose events: 0 [ 0.127988] ... event mask: 000000000000000f [ 0.127988] MCE: In-kernel MCE decoding enabled. [ 0.127988] Brought up 1 CPUs [ 0.127988] Total of 1 processors activated (6000.67 BogoMIPS). [ 0.127988] devtmpfs: initialized [ 0.128432] PM: Registering ACPI NVS region at cff8e000 (270336 bytes) [ 0.129029] RTC time: 14:06:53, date: 04/12/12 [ 0.129055] NET: Registered protocol family 16 [ 0.129119] node 0 link 0: io port [1000, ffffff] [ 0.129122] TOM: 00000000d0000000 aka 3328M [ 0.129124] Fam 10h mmconf [mem 0xe0000000-0xefffffff] [ 0.129126] node 0 link 0: mmio [a0000, bffff] [ 0.129129] node 0 link 0: mmio [d0000000, dfffffff] [ 0.129130] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.129132] node 0 link 0: mmio [f0000000, ffefffff] [ 0.129134] TOM2: 0000000130000000 aka 4864M [ 0.129136] bus: [00, 07] on node 0 link 0 [ 0.129137] bus: 00 index 0 [io 0x0000-0xffff] [ 0.129139] bus: 00 index 1 [mem 0x000a0000-0x000bffff] [ 0.129140] bus: 00 index 2 [mem 0xd0000000-0xdfffffff] [ 0.129142] bus: 00 index 3 [mem 0xf0000000-0xffffffff] [ 0.129143] bus: 00 index 4 [mem 0x130000000-0xfcffffffff] [ 0.129189] ACPI: bus type pci registered [ 0.129242] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.129244] PCI: not using MMCONFIG [ 0.129245] PCI: Using configuration type 1 for base access [ 0.129247] PCI: Using configuration type 1 for extended access [ 0.129555] bio: create slab at 0 [ 0.129595] ACPI: Added _OSI(Module Device) [ 0.129596] ACPI: Added _OSI(Processor Device) [ 0.129598] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.129599] ACPI: Added _OSI(Processor Aggregator Device) [ 0.130144] ACPI: EC: Look up EC in DSDT [ 0.131307] ACPI: Executed 3 blocks of module-level executable AML code [ 0.133922] ACPI: Interpreter enabled [ 0.133926] ACPI: (supports S0 S1 S3 S4 S5) [ 0.133942] ACPI: Using PIC for interrupt routing [ 0.133961] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.134991] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.155084] ACPI: No dock devices found. [ 0.155089] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.155148] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.155242] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.155244] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.155246] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.155248] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.155250] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff] [ 0.155252] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfed44fff] [ 0.155273] PCI host bridge to bus 0000:00 [ 0.155275] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7] [ 0.155276] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff] [ 0.155278] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff] [ 0.155280] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff] [ 0.155282] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xdfffffff] [ 0.155284] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed44fff] [ 0.155293] pci 0000:00:00.0: [1022:9600] type 0 class 0x000600 [ 0.155337] pci 0000:00:02.0: [1022:9603] type 1 class 0x000604 [ 0.155365] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.155393] pci 0000:00:06.0: [1022:9606] type 1 class 0x000604 [ 0.155420] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold [ 0.155451] pci 0000:00:11.0: [1002:4390] type 0 class 0x000101 [ 0.155470] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007] [ 0.155479] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003] [ 0.155488] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007] [ 0.155497] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003] [ 0.155506] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f] [ 0.155515] pci 0000:00:11.0: reg 24: [mem 0xfbdff800-0xfbdffbff] [ 0.155534] pci 0000:00:11.0: set SATA to AHCI mode [ 0.155587] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03 [ 0.155599] pci 0000:00:12.0: reg 10: [mem 0xfbdfe000-0xfbdfefff] [ 0.155660] pci 0000:00:12.1: [1002:4398] type 0 class 0x000c03 [ 0.155672] pci 0000:00:12.1: reg 10: [mem 0xfbdfd000-0xfbdfdfff] [ 0.155740] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03 [ 0.155757] pci 0000:00:12.2: reg 10: [mem 0xfbdff000-0xfbdff0ff] [ 0.155835] pci 0000:00:12.2: supports D1 D2 [ 0.155836] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.155858] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03 [ 0.155870] pci 0000:00:13.0: reg 10: [mem 0xfbdfc000-0xfbdfcfff] [ 0.155930] pci 0000:00:13.1: [1002:4398] type 0 class 0x000c03 [ 0.155942] pci 0000:00:13.1: reg 10: [mem 0xfbdfb000-0xfbdfbfff] [ 0.156014] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03 [ 0.156031] pci 0000:00:13.2: reg 10: [mem 0xfbdfa800-0xfbdfa8ff] [ 0.156108] pci 0000:00:13.2: supports D1 D2 [ 0.156110] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.156134] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05 [ 0.156227] pci 0000:00:14.1: [1002:439c] type 0 class 0x000101 [ 0.156242] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.156251] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.156260] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.156268] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.156277] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.156331] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403 [ 0.156351] pci 0000:00:14.2: reg 10: [mem 0xfbdf4000-0xfbdf7fff 64bit] [ 0.156413] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.156427] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601 [ 0.156500] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604 [ 0.156539] pci 0000:00:14.5: [1002:4399] type 0 class 0x000c03 [ 0.156551] pci 0000:00:14.5: reg 10: [mem 0xfbdf9000-0xfbdf9fff] [ 0.156614] pci 0000:00:18.0: [1022:1200] type 0 class 0x000600 [ 0.156627] pci 0000:00:18.1: [1022:1201] type 0 class 0x000600 [ 0.156637] pci 0000:00:18.2: [1022:1202] type 0 class 0x000600 [ 0.156646] pci 0000:00:18.3: [1022:1203] type 0 class 0x000600 [ 0.156658] pci 0000:00:18.4: [1022:1204] type 0 class 0x000600 [ 0.156703] pci 0000:01:00.0: [1002:95c5] type 0 class 0x000300 [ 0.156714] pci 0000:01:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.156723] pci 0000:01:00.0: reg 18: [mem 0xfbef0000-0xfbefffff 64bit] [ 0.156729] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff] [ 0.156740] pci 0000:01:00.0: reg 30: [mem 0xfbec0000-0xfbedffff pref] [ 0.156766] pci 0000:01:00.0: supports D1 D2 [ 0.156783] pci 0000:01:00.1: [1002:aa28] type 0 class 0x000403 [ 0.156794] pci 0000:01:00.1: reg 10: [mem 0xfbeec000-0xfbeeffff 64bit] [ 0.156842] pci 0000:01:00.1: supports D1 D2 [ 0.158009] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.158015] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.158017] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.158020] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.158057] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 [ 0.158070] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff] [ 0.158089] pci 0000:02:00.0: reg 18: [mem 0xfaeff000-0xfaefffff 64bit pref] [ 0.158101] pci 0000:02:00.0: reg 20: [mem 0xfaee0000-0xfaeeffff 64bit pref] [ 0.158109] pci 0000:02:00.0: reg 30: [mem 0xfbff0000-0xfbffffff pref] [ 0.158156] pci 0000:02:00.0: supports D1 D2 [ 0.158157] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.160009] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.160014] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.160016] pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.160019] pci 0000:00:06.0: bridge window [mem 0xfae00000-0xfaefffff 64bit pref] [ 0.160063] pci 0000:03:07.0: [109e:036e] type 0 class 0x000400 [ 0.160087] pci 0000:03:07.0: reg 10: [mem 0xfafff000-0xfaffffff pref] [ 0.160213] pci 0000:03:07.1: [109e:0878] type 0 class 0x000480 [ 0.160236] pci 0000:03:07.1: reg 10: [mem 0xfaffe000-0xfaffefff pref] [ 0.160387] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.160395] pci 0000:00:14.4: bridge window [mem 0xfaf00000-0xfaffffff pref] [ 0.160397] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 0.160398] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 0.160400] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.160402] pci 0000:00:14.4: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 0.160404] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) [ 0.160405] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xfed44fff] (subtractive decode) [ 0.160419] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.160591] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT] [ 0.160617] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT] [ 0.160659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT] [ 0.160703] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.160706] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.160707] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.163582] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 *10 11 12 14 15) [ 0.163610] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15) [ 0.163635] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15) [ 0.163659] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 *10 11 12 14 15) [ 0.163683] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.163708] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 *10 11 12 14 15) [ 0.163733] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 *11 12 14 15) [ 0.163757] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled. [ 0.163824] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.163826] vgaarb: loaded [ 0.163827] vgaarb: bridge control possible 0000:01:00.0 [ 0.163885] PCI: Using ACPI for IRQ routing [ 0.172117] PCI: pci_cache_line_size set to 64 bytes [ 0.172180] reserve RAM buffer: 000000000009ec00 - 000000000009ffff [ 0.172182] reserve RAM buffer: 00000000cff80000 - 00000000cfffffff [ 0.172253] NetLabel: Initializing [ 0.172254] NetLabel: domain hash size = 128 [ 0.172255] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.172266] NetLabel: unlabeled traffic allowed by default [ 0.172285] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 0.172288] hpet0: 4 comparators, 32-bit 14.318180 MHz counter [ 0.173996] Switching to clocksource hpet [ 0.177869] pnp: PnP ACPI init [ 0.177882] ACPI: bus type pnp registered [ 0.177978] pnp 00:00: [bus 00-ff] [ 0.177980] pnp 00:00: [io 0x0cf8-0x0cff] [ 0.177981] pnp 00:00: [io 0x0000-0x0cf7 window] [ 0.177983] pnp 00:00: [io 0x0d00-0xffff window] [ 0.177985] pnp 00:00: [mem 0x000a0000-0x000bffff window] [ 0.177987] pnp 00:00: [mem 0x000d0000-0x000dffff window] [ 0.177988] pnp 00:00: [mem 0xd0000000-0xdfffffff window] [ 0.177992] pnp 00:00: [mem 0xf0000000-0xfed44fff window] [ 0.178063] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active) [ 0.178121] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.178123] pnp 00:01: [mem 0x00000000-0xffffffffffffffff disabled] [ 0.178157] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.178182] pnp 00:02: [dma 4] [ 0.178183] pnp 00:02: [io 0x0000-0x000f] [ 0.178185] pnp 00:02: [io 0x0081-0x0083] [ 0.178186] pnp 00:02: [io 0x0087] [ 0.178188] pnp 00:02: [io 0x0089-0x008b] [ 0.178189] pnp 00:02: [io 0x008f] [ 0.178190] pnp 00:02: [io 0x00c0-0x00df] [ 0.178206] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active) [ 0.178212] pnp 00:03: [io 0x0070-0x0071] [ 0.178215] pnp 00:03: [irq 8] [ 0.178227] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.178232] pnp 00:04: [io 0x0061] [ 0.178247] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active) [ 0.178252] pnp 00:05: [io 0x00f0-0x00ff] [ 0.178254] pnp 00:05: [irq 13] [ 0.178266] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active) [ 0.178632] pnp 00:06: [io 0x03f0-0x03f5] [ 0.178634] pnp 00:06: [io 0x03f7] [ 0.178635] pnp 00:06: [irq 6] [ 0.178636] pnp 00:06: [dma 2] [ 0.178671] pnp 00:06: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.179142] pnp 00:07: [io 0x0378-0x037f] [ 0.179144] pnp 00:07: [irq 7] [ 0.179145] pnp 00:07: [dma 0 disabled] [ 0.179314] pnp 00:07: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.179335] pnp 00:08: [mem 0xfed00000-0xfed003ff] [ 0.179350] pnp 00:08: Plug and Play ACPI device, IDs PNP0103 (active) [ 0.179688] pnp 00:09: [io 0x03f8-0x03ff] [ 0.179689] pnp 00:09: [irq 4] [ 0.179691] pnp 00:09: [dma 0 disabled] [ 0.179746] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.179797] pnp 00:0a: [io 0x0060] [ 0.179798] pnp 00:0a: [io 0x0064] [ 0.179800] pnp 00:0a: [mem 0xfec00000-0xfec00fff] [ 0.179801] pnp 00:0a: [mem 0xfee00000-0xfee00fff] [ 0.179826] system 00:0a: [mem 0xfec00000-0xfec00fff] has been reserved [ 0.179828] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.179830] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.179881] pnp 00:0b: [io 0x0010-0x001f] [ 0.179882] pnp 00:0b: [io 0x0022-0x003f] [ 0.179884] pnp 00:0b: [io 0x0062-0x0063] [ 0.179885] pnp 00:0b: [io 0x0065-0x006f] [ 0.179886] pnp 00:0b: [io 0x0072-0x007f] [ 0.179887] pnp 00:0b: [io 0x0080] [ 0.179890] pnp 00:0b: [io 0x0084-0x0086] [ 0.179891] pnp 00:0b: [io 0x0088] [ 0.179893] pnp 00:0b: [io 0x008c-0x008e] [ 0.179894] pnp 00:0b: [io 0x0090-0x009f] [ 0.179895] pnp 00:0b: [io 0x00a2-0x00bf] [ 0.179896] pnp 00:0b: [io 0x00b1] [ 0.179898] pnp 00:0b: [io 0x00e0-0x00ef] [ 0.179899] pnp 00:0b: [io 0x04d0-0x04d1] [ 0.179900] pnp 00:0b: [io 0x040b] [ 0.179901] pnp 00:0b: [io 0x04d6] [ 0.179903] pnp 00:0b: [io 0x0c00-0x0c01] [ 0.179904] pnp 00:0b: [io 0x0c14] [ 0.179905] pnp 00:0b: [io 0x0c50-0x0c51] [ 0.179906] pnp 00:0b: [io 0x0c52] [ 0.179908] pnp 00:0b: [io 0x0c6c] [ 0.179909] pnp 00:0b: [io 0x0c6f] [ 0.179910] pnp 00:0b: [io 0x0cd0-0x0cd1] [ 0.179911] pnp 00:0b: [io 0x0cd2-0x0cd3] [ 0.179912] pnp 00:0b: [io 0x0cd4-0x0cd5] [ 0.179914] pnp 00:0b: [io 0x0cd6-0x0cd7] [ 0.179915] pnp 00:0b: [io 0x0cd8-0x0cdf] [ 0.179916] pnp 00:0b: [io 0x0b00-0x0b3f] [ 0.179918] pnp 00:0b: [io 0x0800-0x089f] [ 0.179919] pnp 00:0b: [io 0x0b20-0x0b2f] [ 0.179920] pnp 00:0b: [io 0x0000-0xffffffffffffffff disabled] [ 0.179922] pnp 00:0b: [io 0x0900-0x090f] [ 0.179923] pnp 00:0b: [io 0x0910-0x091f] [ 0.179924] pnp 00:0b: [io 0xfe00-0xfefe] [ 0.179926] pnp 00:0b: [mem 0xffb80000-0xffbfffff] [ 0.179927] pnp 00:0b: [mem 0xfec10000-0xfec1001f] [ 0.179929] pnp 00:0b: [mem 0xfed40000-0xfed44fff] [ 0.179976] system 00:0b: [io 0x04d0-0x04d1] has been reserved [ 0.179978] system 00:0b: [io 0x040b] has been reserved [ 0.179980] system 00:0b: [io 0x04d6] has been reserved [ 0.179982] system 00:0b: [io 0x0c00-0x0c01] has been reserved [ 0.179983] system 00:0b: [io 0x0c14] has been reserved [ 0.179985] system 00:0b: [io 0x0c50-0x0c51] has been reserved [ 0.179987] system 00:0b: [io 0x0c52] has been reserved [ 0.179989] system 00:0b: [io 0x0c6c] has been reserved [ 0.179990] system 00:0b: [io 0x0c6f] has been reserved [ 0.179992] system 00:0b: [io 0x0cd0-0x0cd1] has been reserved [ 0.179994] system 00:0b: [io 0x0cd2-0x0cd3] has been reserved [ 0.179996] system 00:0b: [io 0x0cd4-0x0cd5] has been reserved [ 0.180008] system 00:0b: [io 0x0cd6-0x0cd7] has been reserved [ 0.180010] system 00:0b: [io 0x0cd8-0x0cdf] has been reserved [ 0.180012] system 00:0b: [io 0x0b00-0x0b3f] has been reserved [ 0.180014] system 00:0b: [io 0x0800-0x089f] has been reserved [ 0.180015] system 00:0b: [io 0x0b20-0x0b2f] has been reserved [ 0.180017] system 00:0b: [io 0x0900-0x090f] has been reserved [ 0.180019] system 00:0b: [io 0x0910-0x091f] has been reserved [ 0.180021] system 00:0b: [io 0xfe00-0xfefe] has been reserved [ 0.180023] system 00:0b: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.180026] system 00:0b: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.180028] system 00:0b: [mem 0xfed40000-0xfed44fff] has been reserved [ 0.180030] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.180123] pnp 00:0c: [io 0x0000-0xffffffffffffffff disabled] [ 0.180125] pnp 00:0c: [io 0x0230-0x023f] [ 0.180126] pnp 00:0c: [io 0x0290-0x029f] [ 0.180127] pnp 00:0c: [io 0x0300-0x030f] [ 0.180129] pnp 00:0c: [io 0x0a30-0x0a3f] [ 0.180153] system 00:0c: [io 0x0230-0x023f] has been reserved [ 0.180155] system 00:0c: [io 0x0290-0x029f] has been reserved [ 0.180157] system 00:0c: [io 0x0300-0x030f] has been reserved [ 0.180159] system 00:0c: [io 0x0a30-0x0a3f] has been reserved [ 0.180161] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.180188] pnp 00:0d: [mem 0xe0000000-0xefffffff] [ 0.180210] system 00:0d: [mem 0xe0000000-0xefffffff] has been reserved [ 0.180212] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active) [ 0.180402] pnp 00:0e: [mem 0x00000000-0x0009ffff] [ 0.180403] pnp 00:0e: [mem 0x000c0000-0x000cffff] [ 0.180405] pnp 00:0e: [mem 0x000e0000-0x000fffff] [ 0.180406] pnp 00:0e: [mem 0x00100000-0xcfffffff] [ 0.180408] pnp 00:0e: [mem 0xfed45000-0xffffffff] [ 0.180436] system 00:0e: [mem 0x00000000-0x0009ffff] could not be reserved [ 0.180438] system 00:0e: [mem 0x000c0000-0x000cffff] could not be reserved [ 0.180440] system 00:0e: [mem 0x000e0000-0x000fffff] could not be reserved [ 0.180442] system 00:0e: [mem 0x00100000-0xcfffffff] could not be reserved [ 0.180444] system 00:0e: [mem 0xfed45000-0xffffffff] could not be reserved [ 0.180446] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active) [ 0.180513] pnp: PnP ACPI: found 15 devices [ 0.180514] ACPI: ACPI bus type pnp unregistered [ 0.185980] PCI: max bus depth: 1 pci_try_num: 2 [ 0.185996] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.186008] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.186011] pci 0000:00:02.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 0.186013] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.186016] pci 0000:00:06.0: PCI bridge to [bus 02-02] [ 0.186018] pci 0000:00:06.0: bridge window [io 0xe000-0xefff] [ 0.186021] pci 0000:00:06.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.186023] pci 0000:00:06.0: bridge window [mem 0xfae00000-0xfaefffff 64bit pref] [ 0.186026] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.186033] pci 0000:00:14.4: bridge window [mem 0xfaf00000-0xfaffffff pref] [ 0.186081] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10 [ 0.186083] PCI: setting IRQ 10 as level-triggered [ 0.186095] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 0.186097] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 0.186099] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.186101] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 0.186102] pci_bus 0000:00: resource 8 [mem 0xd0000000-0xdfffffff] [ 0.186104] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed44fff] [ 0.186106] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.186108] pci_bus 0000:01: resource 1 [mem 0xfbe00000-0xfbefffff] [ 0.186109] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.186111] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.186113] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.186115] pci_bus 0000:02: resource 2 [mem 0xfae00000-0xfaefffff 64bit pref] [ 0.186117] pci_bus 0000:03: resource 2 [mem 0xfaf00000-0xfaffffff pref] [ 0.186119] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7] [ 0.186120] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff] [ 0.186122] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.186124] pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff] [ 0.186125] pci_bus 0000:03: resource 8 [mem 0xd0000000-0xdfffffff] [ 0.186127] pci_bus 0000:03: resource 9 [mem 0xf0000000-0xfed44fff] [ 0.186158] NET: Registered protocol family 2 [ 0.186253] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.187118] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.189606] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.189922] TCP: Hash tables configured (established 524288 bind 65536) [ 0.189924] TCP reno registered [ 0.189934] UDP hash table entries: 2048 (order: 4, 65536 bytes) [ 0.189962] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) [ 0.190059] NET: Registered protocol family 1 [ 0.190154] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 [ 0.378139] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 0.378142] PCI: setting IRQ 11 as level-triggered [ 0.522138] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 [ 0.594080] pci 0000:01:00.0: Boot video device [ 0.594091] PCI: CLS 64 bytes, default 64 [ 0.594132] Trying to unpack rootfs image as initramfs... [ 0.731827] Freeing initrd memory: 16868k freed [ 0.737134] PCI-DMA: Disabling AGP. [ 0.737194] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 0.737196] PCI-DMA: using GART IOMMU. [ 0.737198] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.739690] IBS: LVT offset 1 assigned [ 0.739700] perf: AMD IBS detected (0x0000001f) [ 0.739816] audit: initializing netlink socket (disabled) [ 0.739826] type=2000 audit(1334239613.738:1): initialized [ 0.751299] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.752771] VFS: Disk quotas dquot_6.5.2 [ 0.752809] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.752910] msgmni has been set to 7908 [ 0.753044] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.753068] io scheduler noop registered [ 0.753069] io scheduler deadline registered [ 0.753104] io scheduler cfq registered (default) [ 0.753200] pcieport 0000:00:02.0: irq 16 for MSI/MSI-X [ 0.753270] pcieport 0000:00:06.0: irq 17 for MSI/MSI-X [ 0.753338] vesafb: mode is 800x600x16, linelength=1600, pages=16 [ 0.753340] vesafb: scrolling: redraw [ 0.753342] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 [ 0.753477] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90011100000, using 1875k, total 16384k [ 0.756068] Console: switching to colour frame buffer device 100x37 [ 0.758569] fb0: VESA VGA frame buffer device [ 0.758600] GHES: HEST is not enabled! [ 0.758628] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.779282] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.800077] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.800211] Linux agpgart interface v0.103 [ 0.800991] brd: module loaded [ 0.801074] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 0.801408] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 0.801413] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 0.801467] mousedev: PS/2 mouse device common for all mice [ 0.801543] rtc_cmos 00:03: RTC can wake from S4 [ 0.801614] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 0.801634] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 0.801640] cpuidle: using governor ladder [ 0.801642] cpuidle: using governor menu [ 0.801773] TCP cubic registered [ 0.801774] Registering the dns_resolver key type [ 0.801828] PM: Checking hibernation image partition UUID=06dd1537-9c61-41cc-84a3-8fa60577b660 [ 0.817282] spurious 8259A interrupt: IRQ7. [ 0.897666] PM: Hibernation image not present or could not be loaded. [ 0.897686] registered taskstats version 1 [ 0.898143] Magic number: 8:437:131 [ 0.898176] acpi PNP0C02:03: hash matches [ 0.898182] acpi device:06: hash matches [ 0.898218] rtc_cmos 00:03: setting system clock to 2012-04-12 14:06:54 UTC (1334239614) [ 0.898220] BIOS EDD facility v0.16 2004-Jun-25, 3 devices found [ 0.899233] Freeing unused kernel memory: 748k freed [ 0.899379] Write protecting the kernel read-only data: 10240k [ 0.903536] Freeing unused kernel memory: 1628k freed [ 0.909021] Freeing unused kernel memory: 1992k freed [ 0.924351] dracut: dracut-017-3.mga2 [ 0.936831] device-mapper: uevent: version 1.0.3 [ 0.936900] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 0.943216] udevd[118]: starting version 181 [ 0.981844] dracut: Starting plymouth daemon [ 1.299837] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.299842] ACPI: Power Button [PWRB] [ 1.299871] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.299874] ACPI: Power Button [PWRF] [ 1.301362] wmi: Mapper loaded [ 1.329689] FDC 0 is a post-1991 82077 [ 1.432548] SCSI subsystem initialized [ 1.434390] usbcore: registered new interface driver usbfs [ 1.434409] usbcore: registered new interface driver hub [ 1.447247] usbcore: registered new device driver usb [ 1.456342] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.466690] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 1.466716] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 1.466745] ohci_hcd 0000:00:12.0: irq 10, io mem 0xfbdfe000 [ 1.470966] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.470969] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 1.488311] libata version 3.00 loaded. [ 1.522523] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.522526] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.522529] usb usb1: Product: OHCI Host Controller [ 1.522530] usb usb1: Manufacturer: Linux 3.3.1-desktop-2.mga2 ohci_hcd [ 1.522531] usb usb1: SerialNumber: 0000:00:12.0 [ 1.522632] hub 1-0:1.0: USB hub found [ 1.522641] hub 1-0:1.0: 3 ports detected [ 1.522846] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 1.522854] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2 [ 1.522871] ohci_hcd 0000:00:12.1: irq 10, io mem 0xfbdfd000 [ 1.577115] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.577118] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.577120] usb usb2: Product: OHCI Host Controller [ 1.577121] usb usb2: Manufacturer: Linux 3.3.1-desktop-2.mga2 ohci_hcd [ 1.577123] usb usb2: SerialNumber: 0000:00:12.1 [ 1.577742] hub 2-0:1.0: USB hub found [ 1.577748] hub 2-0:1.0: 3 ports detected [ 1.577867] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 1.577876] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3 [ 1.577895] ohci_hcd 0000:00:13.0: irq 10, io mem 0xfbdfc000 [ 1.632118] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.632121] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.632123] usb usb3: Product: OHCI Host Controller [ 1.632125] usb usb3: Manufacturer: Linux 3.3.1-desktop-2.mga2 ohci_hcd [ 1.632126] usb usb3: SerialNumber: 0000:00:13.0 [ 1.632705] hub 3-0:1.0: USB hub found [ 1.632711] hub 3-0:1.0: 3 ports detected [ 1.632833] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 1.632841] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4 [ 1.632860] ohci_hcd 0000:00:13.1: irq 10, io mem 0xfbdfb000 [ 1.687113] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.687116] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.687118] usb usb4: Product: OHCI Host Controller [ 1.687119] usb usb4: Manufacturer: Linux 3.3.1-desktop-2.mga2 ohci_hcd [ 1.687120] usb usb4: SerialNumber: 0000:00:13.1 [ 1.688440] hub 4-0:1.0: USB hub found [ 1.688446] hub 4-0:1.0: 3 ports detected [ 1.688567] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 1.688573] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5 [ 1.688591] ohci_hcd 0000:00:14.5: irq 10, io mem 0xfbdf9000 [ 1.747308] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.747311] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.747313] usb usb5: Product: OHCI Host Controller [ 1.747314] usb usb5: Manufacturer: Linux 3.3.1-desktop-2.mga2 ohci_hcd [ 1.747316] usb usb5: SerialNumber: 0000:00:14.5 [ 1.747886] hub 5-0:1.0: USB hub found [ 1.747892] hub 5-0:1.0: 2 ports detected [ 1.748298] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 1.748306] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 6 [ 1.748314] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.748334] ehci_hcd 0000:00:12.2: debug port 1 [ 1.748351] ehci_hcd 0000:00:12.2: irq 11, io mem 0xfbdff000 [ 1.752046] Refined TSC clocksource calibration: 3000.000 MHz. [ 1.752051] Switching to clocksource tsc [ 1.849037] usb 1-1: new full-speed USB device number 2 using ohci_hcd [ 1.855020] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 1.855067] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.855069] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.855071] usb usb6: Product: EHCI Host Controller [ 1.855072] usb usb6: Manufacturer: Linux 3.3.1-desktop-2.mga2 ehci_hcd [ 1.855073] usb usb6: SerialNumber: 0000:00:12.2 [ 1.855190] hub 6-0:1.0: USB hub found [ 1.855193] hub 6-0:1.0: 6 ports detected [ 1.855434] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 1.855444] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 7 [ 1.855452] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 1.855472] ehci_hcd 0000:00:13.2: debug port 1 [ 1.855486] ehci_hcd 0000:00:13.2: irq 10, io mem 0xfbdfa800 [ 1.906048] hub 1-0:1.0: unable to enumerate USB device on port 1 [ 1.912026] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 1.912050] usb usb7: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.912052] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.912054] usb usb7: Product: EHCI Host Controller [ 1.912055] usb usb7: Manufacturer: Linux 3.3.1-desktop-2.mga2 ehci_hcd [ 1.912057] usb usb7: SerialNumber: 0000:00:13.2 [ 1.912633] hub 7-0:1.0: USB hub found [ 1.912636] hub 7-0:1.0: 6 ports detected [ 1.913908] pata_atiixp 0000:00:14.1: setting latency timer to 64 [ 1.914191] scsi0 : pata_atiixp [ 1.914263] scsi1 : pata_atiixp [ 1.914678] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14 [ 1.914680] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15 [ 1.914953] ahci 0000:00:11.0: version 3.0 [ 1.915016] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11 [ 1.915069] ahci 0000:00:11.0: irq 18 for MSI/MSI-X [ 1.915149] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.915152] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.915846] scsi2 : ahci [ 1.915912] scsi3 : ahci [ 1.915967] scsi4 : ahci [ 1.916158] scsi5 : ahci [ 1.916228] ata3: SATA max UDMA/133 abar m1024@0xfbdff800 port 0xfbdff900 irq 18 [ 1.916231] ata4: SATA max UDMA/133 abar m1024@0xfbdff800 port 0xfbdff980 irq 18 [ 1.916234] ata5: SATA max UDMA/133 abar m1024@0xfbdff800 port 0xfbdffa00 irq 18 [ 1.916237] ata6: SATA max UDMA/133 abar m1024@0xfbdff800 port 0xfbdffa80 irq 18 [ 2.091349] ata2.01: ATAPI: HL-DT-ST DVDRAM GH22NS50, TN01, max UDMA/100 [ 2.097392] ata2.01: configured for UDMA/100 [ 2.103503] scsi 1:0:1:0: CD-ROM HL-DT-ST DVDRAM GH22NS50 TN01 PQ: 0 ANSI: 5 [ 2.221074] ata6: SATA link down (SStatus 0 SControl 300) [ 2.376033] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.376059] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.376077] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.376639] ata5.00: ATA-7: ST3250310AS, 3.AAA, max UDMA/133 [ 2.376641] ata5.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.376891] ata4.00: ATA-8: WDC WD5000AAKS-22A7B2, 01.03B01, max UDMA/133 [ 2.376893] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.377311] ata5.00: configured for UDMA/133 [ 2.377831] ata4.00: configured for UDMA/133 [ 2.377935] ata3.00: ATA-8: WDC WD5000AADS-00S9B0, 01.00A01, max UDMA/133 [ 2.377937] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.379044] ata3.00: configured for UDMA/133 [ 2.379143] scsi 2:0:0:0: Direct-Access ATA WDC WD5000AADS-0 01.0 PQ: 0 ANSI: 5 [ 2.379356] scsi 3:0:0:0: Direct-Access ATA WDC WD5000AAKS-2 01.0 PQ: 0 ANSI: 5 [ 2.379489] scsi 4:0:0:0: Direct-Access ATA ST3250310AS 3.AA PQ: 0 ANSI: 5 [ 2.393378] sd 2:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.393407] sd 2:0:0:0: [sda] Write Protect is off [ 2.393409] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.393421] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.395263] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.395291] sd 3:0:0:0: [sdb] Write Protect is off [ 2.395293] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.395305] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.395538] sd 4:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 2.395562] sd 4:0:0:0: [sdc] Write Protect is off [ 2.395564] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.395575] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.398132] Uniform Multi-Platform E-IDE driver [ 2.409718] sdb: sdb1 sdb2 sdb3 [ 2.409945] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.423109] sda: sda1 < sda5 sda6 > sda2 [ 2.423359] sd 2:0:0:0: [sda] Attached SCSI disk [ 2.423938] sdc: sdc1 sdc2 sdc3 [ 2.424131] sd 4:0:0:0: [sdc] Attached SCSI disk [ 2.433474] sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.433478] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 2.433980] sr 1:0:1:0: Attached scsi CD-ROM sr0 [ 2.868907] PM: Marking nosave pages: 000000000009e000 - 0000000000100000 [ 2.868911] PM: Marking nosave pages: 00000000cff80000 - 0000000100000000 [ 2.869433] PM: Marking nosave pages: 00000000c4000000 - 00000000c8000000 [ 2.869571] PM: Basic memory bitmaps created [ 2.882588] PM: Basic memory bitmaps freed [ 2.885074] PM: Starting manual resume from disk [ 2.885078] PM: Hibernation image partition 8:2 present [ 2.885079] PM: Looking for hibernation image. [ 2.885253] PM: Image not found (code -22) [ 2.885254] PM: Hibernation image not present or could not be loaded. [ 2.960083] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null) [ 2.993039] usb 6-3: new high-speed USB device number 4 using ehci_hcd [ 3.045467] dracut: Checking ext4: /dev/disk/by-uuid/f7de12ae-90d0-43b9-9007-78de70e8d163 [ 3.045504] dracut: issuing e2fsck -a /dev/disk/by-uuid/f7de12ae-90d0-43b9-9007-78de70e8d163 [ 3.106487] dracut: /dev/disk/by-uuid/f7de12ae-90d0-43b9-9007-78de70e8d163: clean, 205214/12214272 files, 2167698/48837584 blocks [ 3.106630] dracut: Remounting /dev/disk/by-uuid/f7de12ae-90d0-43b9-9007-78de70e8d163 with -o acl,relatime,ro [ 3.108918] usb 6-3: New USB device found, idVendor=05e3, idProduct=0608 [ 3.108921] usb 6-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.108923] usb 6-3: Product: USB2.0 Hub [ 3.109322] hub 6-3:1.0: USB hub found [ 3.109667] hub 6-3:1.0: 4 ports detected [ 3.138678] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: acl [ 3.204131] dracut: Mounted root filesystem /dev/sda5 [ 3.361156] dracut: Switching root [ 3.361972] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist. [ 3.417035] usb 7-3: new high-speed USB device number 2 using ehci_hcd [ 3.534164] usb 7-3: New USB device found, idVendor=058f, idProduct=6364 [ 3.534168] usb 7-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 3.534170] usb 7-3: Product: Mass Storage Device [ 3.534171] usb 7-3: Manufacturer: Generic [ 3.534172] usb 7-3: SerialNumber: 058F63646476 [ 3.863036] usb 1-1: new full-speed USB device number 3 using ohci_hcd [ 4.009878] usb 1-1: New USB device found, idVendor=04b8, idProduct=0110 [ 4.009881] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.009883] usb 1-1: Product: EPSON Scanner [ 4.009884] usb 1-1: Manufacturer: EPSON [ 4.152325] NET: Registered protocol family 10 [ 4.250029] usb 1-2: new low-speed USB device number 4 using ohci_hcd [ 4.400905] usb 1-2: New USB device found, idVendor=08ca, idProduct=0020 [ 4.400908] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.400910] usb 1-2: Product: APT-6000U [ 4.400912] usb 1-2: Manufacturer: AIPTEK [ 4.641041] usb 2-1: new full-speed USB device number 2 using ohci_hcd [ 4.794788] usb 2-1: New USB device found, idVendor=0a5c, idProduct=4500 [ 4.794792] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.794794] usb 2-1: Product: BCM2046B1 [ 4.794795] usb 2-1: Manufacturer: Broadcom [ 4.796842] hub 2-1:1.0: USB hub found [ 4.798792] hub 2-1:1.0: 3 ports detected [ 5.035032] usb 2-2: new low-speed USB device number 3 using ohci_hcd [ 5.182799] usb 2-2: New USB device found, idVendor=045e, idProduct=0084 [ 5.182802] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.182804] usb 2-2: Product: Microsoft Basic Optical Mouse [ 5.182806] usb 2-2: Manufacturer: Microsoft [ 5.414037] usb 2-3: new low-speed USB device number 4 using ohci_hcd [ 5.566826] usb 2-3: New USB device found, idVendor=045e, idProduct=0750 [ 5.566829] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 5.566831] usb 2-3: Product: Wired Keyboard 600 [ 5.566832] usb 2-3: Manufacturer: Microsoft [ 5.795031] usb 4-3: new full-speed USB device number 2 using ohci_hcd [ 5.869217] udevd[342]: starting version 181 [ 5.949564] usb 4-3: New USB device found, idVendor=04e8, idProduct=663f [ 5.949567] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 5.949569] usb 4-3: Product: CUSTT13 Development Platform [ 5.949571] usb 4-3: Manufacturer: CUSTT13 [ 5.949572] usb 4-3: SerialNumber: 00000000 [ 6.027879] usb 2-1.1: new full-speed USB device number 5 using ohci_hcd [ 6.118870] usb 2-1.1: New USB device found, idVendor=0a5c, idProduct=4502 [ 6.118873] usb 2-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.186887] usb 2-1.2: new full-speed USB device number 6 using ohci_hcd [ 6.277900] usb 2-1.2: New USB device found, idVendor=0a5c, idProduct=4503 [ 6.277903] usb 2-1.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 6.346881] usb 2-1.3: new full-speed USB device number 7 using ohci_hcd [ 6.399531] EXT4-fs (sda5): re-mounted. Opts: acl [ 6.445910] usb 2-1.3: New USB device found, idVendor=050d, idProduct=0017 [ 6.445913] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.445915] usb 2-1.3: Product: BLUETOOTH USB +EDR ADAPTER Class 1 v2.1 UHE [ 6.445916] usb 2-1.3: Manufacturer: Broadcom Corp [ 6.445918] usb 2-1.3: SerialNumber: 00190E0AE5E9 [ 8.139424] kvm: disabled by bios [ 9.046742] Linux media interface: v0.10 [ 9.257033] Linux video capture interface: v2.00 [ 9.349903] bttv: driver version 0.9.19 loaded [ 9.349906] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 9.350176] bttv: Bt8xx card found (0) [ 9.350255] ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10 [ 9.350267] bttv: 0: Bt878 (rev 17) at 0000:03:07.0, irq: 10, latency: 64, mmio: 0xfafff000 [ 9.350282] bttv: 0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb [ 9.350285] bttv: 0: using: Hauppauge (bt878) [card=10,autodetected] [ 9.352825] bttv: 0: Hauppauge/Voodoo msp34xx: reset line init [5] [ 9.390074] tveeprom 0-0050: The eeprom says no radio is present, but the tuner type [ 9.390076] tveeprom 0-0050: indicates otherwise. I will assume that radio is present. [ 9.390078] tveeprom 0-0050: Hauppauge model 44809, rev E1A5, serial# 2999459 [ 9.390080] tveeprom 0-0050: tuner model is TCL MPE05-2 (idx 105, type 38) [ 9.390082] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) (eeprom 0x74) [ 9.390084] tveeprom 0-0050: audio processor is None (idx 0) [ 9.390086] tveeprom 0-0050: decoder processor is BT878 (idx 14) [ 9.390087] tveeprom 0-0050: has radio [ 9.390088] bttv: 0: Hauppauge eeprom indicates model#44809 [ 9.390090] bttv: 0: tuner type=38 [ 9.395613] IR NEC protocol handler initialized [ 9.450738] IR RC5(x) protocol handler initialized [ 9.464731] i2c-core: driver [msp3400] using legacy suspend method [ 9.464734] i2c-core: driver [msp3400] using legacy resume method [ 9.632842] IR RC6 protocol handler initialized [ 9.774037] IR JVC protocol handler initialized [ 9.954161] IR Sony protocol handler initialized [ 9.956035] IR SANYO protocol handler initialized [ 9.992596] bttv: 0: audio absent, no audio device found! [ 10.120264] IR MCE Keyboard/mouse protocol handler initialized [ 10.140908] i2c-core: driver [tuner] using legacy suspend method [ 10.140911] i2c-core: driver [tuner] using legacy resume method [ 10.144872] lirc_dev: IR Remote Control driver registered, major 251 [ 10.490144] IR LIRC bridge handler initialized [ 11.083364] tda9887 0-0043: creating new instance [ 11.083366] tda9887 0-0043: tda988[5/6/7] found [ 11.084133] tuner 0-0043: Tuner 74 found with type(s) Radio TV. [ 11.086216] tuner 0-0061: Tuner -1 found with type(s) Radio TV. [ 11.528050] tuner-simple 0-0061: creating new instance [ 11.528054] tuner-simple 0-0061: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3)) [ 11.529617] bttv: 0: registered device video0 [ 11.529635] bttv: 0: registered device vbi0 [ 11.529651] bttv: 0: registered device radio0 [ 11.529683] bttv: 0: Setting PLL: 28636363 => 35468950 (needs up to 100ms) [ 11.551017] bttv: PLL set ok [ 11.626956] bt878: AUDIO driver version 0.0.0 loaded [ 12.080948] powernow-k8: Found 1 AMD Athlon(tm) II X2 250 Processor (1 cpu cores) (version 2.20.00) [ 12.080980] powernow-k8: 0 : pstate 0 (3000 MHz) [ 12.080981] powernow-k8: 1 : pstate 1 (2300 MHz) [ 12.080982] powernow-k8: 2 : pstate 2 (1800 MHz) [ 12.080983] powernow-k8: 3 : pstate 3 (800 MHz) [ 12.628735] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01 [ 12.628815] SP5100 TCO timer: Watchdog reboot not detected. [ 12.628853] SP5100 TCO timer: initialized (0xffffc900006620f0). heartbeat=60 sec (nowayout=1) [ 12.633984] ACPI Warning: 0x0000000000000b00-0x0000000000000b07 SystemIO conflicts with Region \SOR1 1 (20120111/utaddress-251) [ 12.633991] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 12.694338] IT8712 SuperIO detected. [ 12.694553] parport_pc 00:07: reported by Plug and Play ACPI [ 12.694603] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 12.706085] EDAC MC: Ver: 2.1.0 [ 12.711471] parport0: Printer, Canon LBP-660 [ 12.722031] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 12.722117] r8169 0000:02:00.0: irq 19 for MSI/MSI-X [ 12.722432] r8169 0000:02:00.0: eth0: RTL8168c/8111c at 0xffffc90000664000, 00:26:18:ce:78:65, XID 1c4000c0 IRQ 19 [ 12.722435] r8169 0000:02:00.0: eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko] [ 12.766472] AMD64 EDAC driver v3.4.0 [ 12.769563] EDAC amd64: DRAM ECC disabled. [ 12.769568] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 12.769569] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 12.769570] (Note that use of the override may cause unknown side effects.) [ 12.955728] ppdev: user-space parallel port driver [ 13.067478] WARNING! power/level is deprecated; use power/control instead [ 13.487419] bt87x0: Using board 1, analog, digital (rate 32000 Hz) [ 14.110061] hda-intel: Using LPIB position fix [ 14.116892] hda-intel: Enable sync_write for stable communication [ 14.156181] cdc_acm 4-3:2.3: ttyACM0: USB ACM device [ 14.159210] usbcore: registered new interface driver cdc_acm [ 14.159213] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 14.187207] autoconfig: line_outs=4 (0x1c/0x19/0x22/0x23/0x0) type:line [ 14.187210] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) [ 14.187212] hp_outs=1 (0x1d/0x0/0x0/0x0/0x0) [ 14.187213] mono: mono_out=0x0 [ 14.187214] dig-out=0x20/0x0 [ 14.187215] inputs: Rear Mic=0x1a Front Mic=0x1e Line=0x1b CD=0x1f [ 14.214179] input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input2 [ 14.214985] input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input3 [ 14.215043] input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4 [ 14.215084] input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input5 [ 14.215118] input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input6 [ 14.215153] input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input7 [ 14.215186] input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input8 [ 14.215221] input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input9 [ 14.218515] hda-intel: Using LPIB position fix [ 14.218579] snd_hda_intel 0000:01:00.1: irq 20 for MSI/MSI-X [ 14.224325] hda-intel: Enable sync_write for stable communication [ 14.328266] cfg80211: Calling CRDA to update world regulatory domain [ 14.644280] usbcore: registered new interface driver uas [ 14.698176] usbcore: registered new interface driver cdc_ether [ 14.735295] usb 4-3: bad CDC descriptors [ 14.735315] usbcore: registered new interface driver rndis_host [ 14.882449] usb 4-3: bad CDC descriptors [ 14.882493] usbcore: registered new interface driver rndis_wlan [ 14.922275] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0 [ 14.922344] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card2/input10 [ 15.090018] cfg80211: World regulatory domain updated: [ 15.090021] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 15.090023] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.090025] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.090027] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 15.090029] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.090030] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 15.147496] generic-usb 0003:058F:6364.0001: hiddev0,hidraw0: USB HID v1.10 Device [Generic Mass Storage Device] on usb-0000:00:13.2-3/input1 [ 15.476562] Initializing USB Mass Storage driver... [ 15.482641] scsi6 : usb-storage 7-3:1.0 [ 15.482832] scsi7 : usb-storage 4-3:2.5 [ 15.482886] usbcore: registered new interface driver usb-storage [ 15.482888] USB Mass Storage support registered. [ 15.879410] Adding 8052732k swap on /dev/sdc3. Priority:0 extents:1 across:8052732k [ 16.215411] Adding 8385532k swap on /dev/sda2. Priority:0 extents:1 across:8385532k [ 16.218828] fuse init (API version 7.18) [ 16.484734] scsi 6:0:0:0: Direct-Access Generic- SD/MMC 1.00 PQ: 0 ANSI: 0 [ 16.486243] scsi 6:0:0:1: Direct-Access Generic- Compact Flash 1.01 PQ: 0 ANSI: 0 [ 16.487108] sd 6:0:0:0: [sdd] Attached SCSI removable disk [ 16.488362] scsi 6:0:0:2: Direct-Access Generic- SM/xD-Picture 1.02 PQ: 0 ANSI: 0 [ 16.489853] sd 6:0:0:1: [sde] Attached SCSI removable disk [ 16.491240] scsi 6:0:0:3: Direct-Access Generic- MS/MS-Pro 1.03 PQ: 0 ANSI: 0 CCS [ 16.491412] scsi 7:0:0:0: Direct-Access SAMSUNG C3050 MemoryCard 2.01 PQ: 0 ANSI: 0 [ 16.494618] sd 6:0:0:2: [sdf] Attached SCSI removable disk [ 16.497236] sd 6:0:0:3: [sdg] Attached SCSI removable disk [ 16.511318] sd 7:0:0:0: [sdh] Attached SCSI removable disk [ 16.575738] aiptek 1-2:1.0: Aiptek using 400 ms programming speed [ 16.575805] input: Aiptek as /devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/input/input11 [ 16.575979] usbcore: registered new interface driver aiptek [ 16.579758] input: Microsoft Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb2/2-2/2-2:1.0/input/input12 [ 16.579962] generic-usb 0003:045E:0084.0002: input,hidraw1: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse ] on usb-0000:00:12.1-2/input0 [ 16.585769] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:12.1/usb2/2-3/2-3:1.0/input/input13 [ 16.585926] generic-usb 0003:045E:0750.0003: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:12.1-3/input0 [ 16.597207] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:12.1/usb2/2-3/2-3:1.1/input/input14 [ 16.597364] generic-usb 0003:045E:0750.0004: input,hidraw3: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:12.1-3/input1 [ 16.599816] input: HID 0a5c:4502 as /devices/pci0000:00/0000:00:12.1/usb2/2-1/2-1.1/2-1.1:1.0/input/input15 [ 16.599994] generic-usb 0003:0A5C:4502.0005: input,hidraw4: USB HID v1.11 Keyboard [HID 0a5c:4502] on usb-0000:00:12.1-1.1/input0 [ 16.604907] input: HID 0a5c:4503 as /devices/pci0000:00/0000:00:12.1/usb2/2-1/2-1.2/2-1.2:1.0/input/input16 [ 16.605115] generic-usb 0003:0A5C:4503.0006: input,hidraw5: USB HID v1.11 Mouse [HID 0a5c:4503] on usb-0000:00:12.1-1.2/input0 [ 16.605135] usbcore: registered new interface driver usbhid [ 16.605136] usbhid: USB HID core driver [ 16.899267] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: acl [ 17.316905] Bluetooth: Core ver 2.16 [ 17.316928] NET: Registered protocol family 31 [ 17.316930] Bluetooth: HCI device and connection manager initialized [ 17.317174] Bluetooth: HCI socket layer initialized [ 17.317176] Bluetooth: L2CAP socket layer initialized [ 17.317180] Bluetooth: SCO socket layer initialized [ 17.664088] usbcore: registered new interface driver btusb [ 18.926693] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl [ 21.510242] r8169 0000:02:00.0: eth0: link down [ 21.510248] r8169 0000:02:00.0: eth0: link down [ 21.581622] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.617025] vboxdrv: Found 1 processor cores. [ 21.624817] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 21.624819] vboxdrv: Successfully loaded version 4.1.12_OSE (interface 0x00190000). [ 22.092666] ata3.00: configured for UDMA/133 [ 22.092671] ata3: EH complete [ 22.159316] ata4.00: configured for UDMA/133 [ 22.159320] ata4: EH complete [ 22.501428] ata5.00: configured for UDMA/133 [ 22.501433] ata5: EH complete [ 23.134766] r8169 0000:02:00.0: eth0: link up [ 23.135156] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 23.163153] NET: Registered protocol family 17 [ 23.302764] EXT4-fs (sda5): re-mounted. Opts: acl,commit=0 [ 23.374298] EXT4-fs (sdb2): re-mounted. Opts: acl,commit=0 [ 23.465744] EXT4-fs (sda6): re-mounted. Opts: acl,commit=0 [ 24.698327] CIFS VFS: default security mechanism requested. The default security mechanism will be upgraded from ntlm to ntlmv2 in kernel release 3.3 [ 28.562220] ip_tables: (C) 2000-2006 Netfilter Core Team [ 28.994829] Netfilter messages via NETLINK v0.30. [ 29.009027] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 29.170807] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 29.173192] NF_TPROXY: Transparent proxy support initialized, version 4.1.0 [ 29.173194] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd. [ 29.209670] ctnetlink v0.93: registering with nfnetlink. [ 29.305483] ip_set: protocol 6 [ 29.318131] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 29.586100] xt_time: kernel timezone is +0200 [ 29.669274] Bridge firewalling registered [ 29.756923] u32 classifier [ 29.756925] Actions configured [ 34.146010] eth0: no IPv6 routers present