Probleme installation distribition
( n'importe quelle distrib)
Système et matériels / Installation et configuration

fofo77 Membre non connecté
-
- Voir le profil du membre fofo77
- Inscrit le : 11/10/2012
- Groupes :
J'ai ressorti mon ordi de bureau fabriqué maison du placard, ( je l'ai mis justement a cause de ce probleme, mais avec un windobs, il fonctionne a merveille ), d'abord je détail la bête :
CM : Asus M4A88TD-V-EVO /USB3
Athlon II x3 450
4 Giga de ram
DD 2 Terra
CGX Nvidia 520 GT ( pas sur, de mémoire)
Donc je précise qu'il fonctionne a merveille sous W7, mais sous mon pingouin, Rien a faire.
Donc je me suis procuré les dernières versions pour voir :
-Mageia 6 STA1
-Kubuntu 16.04.1
-Linux Mint 18 KDE
-Debian 8.05 KDE
Je vais tenter de décrire le probleme, j'ai donc testé les 4 distribs, j'arrive a les installer sans souci, je reboot, elles fonctionnent jusqu’au redémarrage suivant ou je me retrouve avec le petit curseur qui clignote ( au début du chargement après grug en haut à gauche) puis ce fige, est la c'est le plantage, quand le curseur continu de clignoter, c'est tout bon, le chargement se poursuit normalement puis j'ai un fonctionnement normal de la distrib jusqu’au reboot, pour info 1 fois sur 2 cela plante, obliger de redémarrer via le bouton.
Alors j'ai bien tenté des modifs dans le bios, mais sans succès, le probleme vient sûrement de ma carte mère, si je n'y arrive pas, il faudra la changer, mais avant d'en arrivé la, il faut être sur qu'elle soit incompatible avec linux, mais c'est peut être pas grand chose, je fini sur un peu d'optimiste

Alors si vous avez des idées, je prends

CM ASUS B350 Prime plus, Ryzen 7 5700G, 23 Giga de ram, Geforce GTX 1050 Ti 12 Giga de ram, SSD 500 x2 dual boot Windows10/Mageia9
Ordinateur portable Asus X751L Windows10
Ordinateur portable Asus X751L Windows10

OPS56 Membre non connecté
-
- Voir le profil du membre OPS56
- Inscrit le : 18/11/2008
- Groupes :
Ça ressemble vaguement à ce que j'ai eu sur mon portable.
regarde ici, on ne sait jamais.
Bonne chance.

Dell G3-15 Intel Corei7 - 16Go Ram - Nvidia GTX1660 Ti (Tri boot Mageia 9- 64 bits / Linux Mint 20 Cinamon/ Windows 10)
Core i5 760 - 8Go Ram - Nvidia Gforce 450 - (Triple boot Mageia 9-64 bits - Plasma 5 / Mint 20 Cinamon / Open Suse Tumbleweed - Plasma 5)

lebarhon Membre non connecté
-
- Voir le profil du membre lebarhon
- Inscrit le : 09/10/2010
- Groupes :
-
Équipe Mageia
-
Membre d'Honneur
Quand cela plante, essaye de taper la touche ESC et regarde les derniers commentaires.
Si cela ne marche pas , tape Alt+Ctrl+F2 et entre la commande journalctl -xb, cherche les messages d'erreur.
essaye aussi la commande cat /var/log/Xorg.0.log et cherche les messages d'erreur.
CM Asus Z77-A+i5-2500K+GeForceGT520+RAM8Go
SSD Crucial M4+SSD Samsung EVO
Mageia 6 64 bits
SSD Crucial M4+SSD Samsung EVO
Mageia 6 64 bits

fofo77 Membre non connecté
-
- Voir le profil du membre fofo77
- Inscrit le : 11/10/2012
- Groupes :
Je réinstalle Mageia6 en ce moment, ensuite j'essayerai de récupérer le journal, pour la manip dans le bios, celle-ci n’existe pas chez moi.
CM ASUS B350 Prime plus, Ryzen 7 5700G, 23 Giga de ram, Geforce GTX 1050 Ti 12 Giga de ram, SSD 500 x2 dual boot Windows10/Mageia9
Ordinateur portable Asus X751L Windows10
Ordinateur portable Asus X751L Windows10

fofo77 Membre non connecté
-
- Voir le profil du membre fofo77
- Inscrit le : 11/10/2012
- Groupes :
Bon, Bcp de probleme pour cette réinstallation, au point d'abandonner et tenter kubuntu 16.04.1 de nouveau, installation ok, mais tjrs des problèmes, une fois sur le système, j'ai lancer la commande "journalctl -xb " donc j'ai extrait un passage
L'unité (unit) systemd-ask-password-plymouth.path a terminé son démarrage, avec le résultat done.
sept. 11 10:50:24 joffrey-bureau kernel: ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (_SB_.PCI0.SBRG.ASOC.SMRG) (20150930/utaddress-254)
sept. 11 10:50:24 joffrey-bureau kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sept. 11 10:50:24 joffrey-bureau kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_intel 0000:01:00.1: Disabling MSI
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: inputs:
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
sept. 11 10:50:25 joffrey-bureau mtp-probe[1570]: checking bus 4, device 3: "/sys/devices/pci0000:00/0000:00:12.0/usb4/4-4"
sept. 11 10:50:25 joffrey-bureau mtp-probe[1571]: checking bus 4, device 4: "/sys/devices/pci0000:00/0000:00:12.0/usb4/4-5"
sept. 11 10:50:25 joffrey-bureau mtp-probe[1571]: bus: 4, device: 4 was not an MTP device
sept. 11 10:50:25 joffrey-bureau mtp-probe[1570]: bus: 4, device: 3 was not an MTP device
sept. 11 10:50:25 joffrey-bureau kernel: EDAC MC: Ver: 3.0.0
sept. 11 10:50:25 joffrey-bureau kernel: MCE: In-kernel MCE decoding enabled.
sept. 11 10:50:25 joffrey-bureau kernel: AMD64 EDAC driver v3.4.0
sept. 11 10:50:25 joffrey-bureau kernel: EDAC amd64: DRAM ECC disabled.
sept. 11 10:50:25 joffrey-bureau kernel: EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
sept. 11 10:50:25 joffrey-bureau kernel: Bluetooth: Core ver 2.21
sept. 11 10:50:25 joffrey-bureau kernel: NET: Registered protocol family 31
sept. 11 10:50:25 joffrey-bureau kernel: Bluetooth: HCI device and connection manager initialized
sept. 11 10:50:25 joffrey-bureau kernel: Bluetooth: HCI socket layer initialized
sept. 11 10:50:25 joffrey-bureau kernel: Bluetooth: L2CAP socket layer initialized
sept. 11 10:50:25 joffrey-bureau kernel: Bluetooth: SCO socket layer initialized
sept. 11 10:50:25 joffrey-bureau kernel: usbcore: registered new interface driver btusb
sept. 11 10:50:25 joffrey-bureau systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
-- Subject: L'unité (unit) systemd-rfkill.socket a terminé son démarrage
sept. 11 10:50:24 joffrey-bureau kernel: ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B07 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B2F (_SB_.PCI0.SBRG.ASOC.SMRG) (20150930/utaddress-254)
sept. 11 10:50:24 joffrey-bureau kernel: ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
sept. 11 10:50:24 joffrey-bureau kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_intel 0000:01:00.1: Disabling MSI
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_intel 0000:01:00.1: Handle vga_switcheroo audio client
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: dig-out=0x11/0x1e
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: inputs:
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x19
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x18
sept. 11 10:50:24 joffrey-bureau kernel: snd_hda_codec_realtek hdaudioC0D0: Line=0x1a
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input8
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input9
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input10
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Line Out Front as /devices/pci0000:00/0000:00:14.2/sound/card0/input11
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Line Out Surround as /devices/pci0000:00/0000:00:14.2/sound/card0/input12
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Line Out CLFE as /devices/pci0000:00/0000:00:14.2/sound/card0/input13
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Line Out Side as /devices/pci0000:00/0000:00:14.2/sound/card0/input14
sept. 11 10:50:24 joffrey-bureau kernel: input: HDA ATI SB Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input15
sept. 11 10:50:25 joffrey-bureau mtp-probe[1570]: checking bus 4, device 3: "/sys/devices/pci0000:00/0000:00:12.0/usb4/4-4"
sept. 11 10:50:25 joffrey-bureau mtp-probe[1571]: checking bus 4, device 4: "/sys/devices/pci0000:00/0000:00:12.0/usb4/4-5"
sept. 11 10:50:25 joffrey-bureau mtp-probe[1571]: bus: 4, device: 4 was not an MTP device
sept. 11 10:50:25 joffrey-bureau mtp-probe[1570]: bus: 4, device: 3 was not an MTP device
sept. 11 10:50:25 joffrey-bureau kernel: EDAC MC: Ver: 3.0.0
sept. 11 10:50:25 joffrey-bureau kernel: MCE: In-kernel MCE decoding enabled.
sept. 11 10:50:25 joffrey-bureau kernel: AMD64 EDAC driver v3.4.0
sept. 11 10:50:25 joffrey-bureau kernel: EDAC amd64: DRAM ECC disabled.
sept. 11 10:50:25 joffrey-bureau kernel: EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
sept. 11 10:50:25 joffrey-bureau kernel: Bluetooth: Core ver 2.21
sept. 11 10:50:25 joffrey-bureau kernel: NET: Registered protocol family 31
sept. 11 10:50:25 joffrey-bureau kernel: Bluetooth: HCI device and connection manager initialized
sept. 11 10:50:25 joffrey-bureau kernel: Bluetooth: HCI socket layer initialized
sept. 11 10:50:25 joffrey-bureau kernel: Bluetooth: L2CAP socket layer initialized
sept. 11 10:50:25 joffrey-bureau kernel: Bluetooth: SCO socket layer initialized
sept. 11 10:50:25 joffrey-bureau kernel: usbcore: registered new interface driver btusb
sept. 11 10:50:25 joffrey-bureau systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
-- Subject: L'unité (unit) systemd-rfkill.socket a terminé son démarrage
le journal est tellement long que j'en oublie peut être, pour moi c'est incompréhensible
Édité par fofo77 Le 11/09/2016 à 11h29
CM ASUS B350 Prime plus, Ryzen 7 5700G, 23 Giga de ram, Geforce GTX 1050 Ti 12 Giga de ram, SSD 500 x2 dual boot Windows10/Mageia9
Ordinateur portable Asus X751L Windows10
Ordinateur portable Asus X751L Windows10

OPS56 Membre non connecté
-
- Voir le profil du membre OPS56
- Inscrit le : 18/11/2008
- Groupes :
As tu essayé de passer les commandes "nolapic" ou "acpi=off" dans la ligne de boot du grub, pour voir ?
@+

Dell G3-15 Intel Corei7 - 16Go Ram - Nvidia GTX1660 Ti (Tri boot Mageia 9- 64 bits / Linux Mint 20 Cinamon/ Windows 10)
Core i5 760 - 8Go Ram - Nvidia Gforce 450 - (Triple boot Mageia 9-64 bits - Plasma 5 / Mint 20 Cinamon / Open Suse Tumbleweed - Plasma 5)

lebarhon Membre non connecté
-
- Voir le profil du membre lebarhon
- Inscrit le : 09/10/2010
- Groupes :
-
Équipe Mageia
-
Membre d'Honneur
C'est le journal de Kubuntu ou de Mageia ?
Si le journal est trop long, il est possible d'ajouter un filtre, par exemple
journalctl -xb |grep fail
pour n'avoir que les lignes qui contiennent le mot "fail" = échec.
Édité par lebarhon Le 11/09/2016 à 11h46
CM Asus Z77-A+i5-2500K+GeForceGT520+RAM8Go
SSD Crucial M4+SSD Samsung EVO
Mageia 6 64 bits
SSD Crucial M4+SSD Samsung EVO
Mageia 6 64 bits

fofo77 Membre non connecté
-
- Voir le profil du membre fofo77
- Inscrit le : 11/10/2012
- Groupes :

C'est le journal de kubuntu 16.04.1, je vais refaire une install de mageia6 cet après midi en espérant plus de succès, pour voir si j'ai les même erreurs.
joffrey@joffrey-bureau:~$ journalctl -xb |grep fail
sept. 11 10:50:27 joffrey-bureau bluetoothd[2304]: Sap driver initialization failed.
sept. 11 10:50:28 joffrey-bureau thermald[2380]: THD engine start failed
sept. 11 10:50:29 joffrey-bureau NetworkManager[2369]: nm_device_get_device_type: assertion 'NM_IS_DEVICE (self)' failed
sept. 11 10:50:29 joffrey-bureau NetworkManager[2369]: <warn> [1473583829.4325] failed to enumerate oFono devices: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
sept. 11 10:50:29 joffrey-bureau wpa_supplicant[2529]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
sept. 11 11:03:25 joffrey-bureau NetworkManager[2369]: <info> [1473584605.8537] device (wlp4s6): state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
sept. 11 11:03:25 joffrey-bureau NetworkManager[2369]: <warn> [1473584605.8562] device (wlp4s6): Activation: failed for connection 'Maison'
sept. 11 11:03:25 joffrey-bureau NetworkManager[2369]: <info> [1473584605.8576] device (wlp4s6): state change: failed -> disconnected (reason 'none') [120 30 0]
sept. 11 11:10:31 joffrey-bureau login[3474]: pam_unix(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=/dev/tty2 ruser= rhost= user=joffrey
sept. 11 11:10:33 joffrey-bureau login[3474]: FAILED LOGIN (1) on '/dev/tty2' FOR 'joffrey', Authentication failure
sept. 11 11:30:38 joffrey-bureau systemd-sleep[3767]: /lib/systemd/system-sleep/wpasupplicant failed with error code 255.
sept. 11 12:03:07 joffrey-bureau kernel: tsc: Marking TSC unstable due to check_tsc_sync_source failed
sept. 11 12:03:07 joffrey-bureau systemd-sleep[3852]: /lib/systemd/system-sleep/wpasupplicant failed with error code 255.
sept. 11 12:03:10 joffrey-bureau wpa_supplicant[2529]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
sept. 11 10:50:27 joffrey-bureau bluetoothd[2304]: Sap driver initialization failed.
sept. 11 10:50:28 joffrey-bureau thermald[2380]: THD engine start failed
sept. 11 10:50:29 joffrey-bureau NetworkManager[2369]: nm_device_get_device_type: assertion 'NM_IS_DEVICE (self)' failed
sept. 11 10:50:29 joffrey-bureau NetworkManager[2369]: <warn> [1473583829.4325] failed to enumerate oFono devices: GDBus.Error:org.freedesktop.DBus.Error.ServiceUnknown: The name org.ofono was not provided by any .service files
sept. 11 10:50:29 joffrey-bureau wpa_supplicant[2529]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
sept. 11 11:03:25 joffrey-bureau NetworkManager[2369]: <info> [1473584605.8537] device (wlp4s6): state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
sept. 11 11:03:25 joffrey-bureau NetworkManager[2369]: <warn> [1473584605.8562] device (wlp4s6): Activation: failed for connection 'Maison'
sept. 11 11:03:25 joffrey-bureau NetworkManager[2369]: <info> [1473584605.8576] device (wlp4s6): state change: failed -> disconnected (reason 'none') [120 30 0]
sept. 11 11:10:31 joffrey-bureau login[3474]: pam_unix(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=/dev/tty2 ruser= rhost= user=joffrey
sept. 11 11:10:33 joffrey-bureau login[3474]: FAILED LOGIN (1) on '/dev/tty2' FOR 'joffrey', Authentication failure
sept. 11 11:30:38 joffrey-bureau systemd-sleep[3767]: /lib/systemd/system-sleep/wpasupplicant failed with error code 255.
sept. 11 12:03:07 joffrey-bureau kernel: tsc: Marking TSC unstable due to check_tsc_sync_source failed
sept. 11 12:03:07 joffrey-bureau systemd-sleep[3852]: /lib/systemd/system-sleep/wpasupplicant failed with error code 255.
sept. 11 12:03:10 joffrey-bureau wpa_supplicant[2529]: dbus: wpa_dbus_get_object_properties: failed to get object properties: (none) none
Édité par fofo77 Le 11/09/2016 à 12h15
CM ASUS B350 Prime plus, Ryzen 7 5700G, 23 Giga de ram, Geforce GTX 1050 Ti 12 Giga de ram, SSD 500 x2 dual boot Windows10/Mageia9
Ordinateur portable Asus X751L Windows10
Ordinateur portable Asus X751L Windows10

fofo77 Membre non connecté
-
- Voir le profil du membre fofo77
- Inscrit le : 11/10/2012
- Groupes :
CM ASUS B350 Prime plus, Ryzen 7 5700G, 23 Giga de ram, Geforce GTX 1050 Ti 12 Giga de ram, SSD 500 x2 dual boot Windows10/Mageia9
Ordinateur portable Asus X751L Windows10
Ordinateur portable Asus X751L Windows10
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie