problème d'export avec darktable [Réglé]

roger.bunivot Membre non connecté
-
- Voir le profil du membre roger.bunivot
- Inscrit le : 11/07/2009
- Site internet
J'aimerai utiliser darktable, mais lorsque je veux exporter en jpg (ou png) une image raw sur mon disque local, dans un dossier dont j'ai les droits d'écriture, j'obtiens l'erreur suivante:
[imageio_storage_disk] could not export to file: `/home/roger/Images/jpg/darktable/IMG_7222.jpg'!
La version de darktable est la 1.6.6
j'ai vu sur le forum debian le même genre de problème pour la version 1.7-1
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=792209
Suis-je le seul à avoir ce bug, avec mageia, (ou le seul a utiliser darktable

Il est aussi fort possible que je n'ai pas bien réussi a me servir de darktable.
Il semble que la version 1.7-2 corrige le problème, est-ce possible de faire l'update .
Merci beaucoup et félicitation pour cette nouvelle version qui tourne bien sur mon vieux (6/7 ans) portable.

Akien Membre non connecté
-
- Voir le profil du membre Akien
- Inscrit le : 12/06/2011
- Groupes :
-
Équipe Mageia

Akien Membre non connecté
-
- Voir le profil du membre Akien
- Inscrit le : 12/06/2011
- Groupes :
-
Équipe Mageia
Et la version darktable-1.6.8-1.mga5 va bientôt arriver sur les miroirs dans Core Updates Testing. Si tu peux la tester puis ajouter un commentaire sur le rapport de bug pour indiquer si le test a été positif ou non, et sur quelle architecture tu as fait ton test (32bit ou 64bit).
Le paquet devrait être disponible d'ici une heure je pense, tu pourras l'installer avec :
Code :
urpmi.update "Testing" && urpmi --searchmedia "Testing" darktable
Édité par Akien Le 23/08/2015 à 10h29

lewyssmith Membre non connecté
-
- Voir le profil du membre lewyssmith
- Inscrit le : 28/11/2014
C'est assez important que, si vous pouvez, vous essayez la mise-à-jour de DarkTable qu'Akien a indiqué, car vous avez éxperimenté le problème qui ne se manifeste pas chez autrui (voir le Bug) ; et vous pouvez verifier l'efficacité de la mise-à-jour.

roger.bunivot Membre non connecté
-
- Voir le profil du membre roger.bunivot
- Inscrit le : 11/07/2009
- Site internet
Ma configuration:
uname -a
Linux Keynux.keynux 3.19.8-desktop-3.mga5 #1 SMP Sat Jun 13 17:05:48 UTC 2015 x86_64 x86_64 x86_64 GNU/Linux
mon bi-processeur: Intel(R) Core(TM)2 Duo CPU P9500 @ 2.53GHz
j'ai 4Go de ram.
J'ai installé la version la version 1.6.8 en utilisant la commande fournie par Akien.
Mais le problème persiste.
le résultat de la commande darktable -d all est peu trop touffu pour passer dans mon message j'ai fait une petite sélection:
Dites moi quelles informations vous manque pour débugger
Caché :
bash_roger@Keynux ~ $ darktable -d all
[memory] at startup
[memory] max address space (vmpeak): 329520 kB
[memory] cur address space (vmsize): 329520 kB
[memory] max used memory (vmhwm ): 12528 kB
[memory] cur used memory (vmrss ): 12528 kB
[sql] exec "CREATE TABLE memory.color_labels_temp (imgid INTEGER PRIMARY KEY)"
[sql] exec "CREATE TABLE memory.collected_images (rowid INTEGER PRIMARY KEY AUTOINCREMENT, imgid INTEGER)"
[sql] exec "CREATE TABLE memory.tmp_selection (imgid INTEGER)"
[sql] exec "CREATE TABLE memory.tagq (tmpid INTEGER PRIMARY KEY, id INTEGER)"
[sql] exec "CREATE TABLE memory.taglist (tmpid INTEGER PRIMARY KEY, id INTEGER UNIQUE ON CONFLICT REPLACE, count INTEGER)"
[sql] exec "CREATE TABLE memory.history (imgid INTEGER, num INTEGER, module INTEGER, operation VARCHAR(256) UNIQUE ON CONFLICT REPLACE, op_params BLOB, enabled INTEGER, blendop_params BLOB, blendop_version INTEGER, multi_priority INTEGER, multi_name VARCHAR(256))"
[sql] exec "CREATE TABLE MEMORY.style_items (styleid INTEGER, num INTEGER, module INTEGER, operation VARCHAR(256), op_params BLOB, enabled INTEGER, blendop_params BLOB, blendop_version INTEGER, multi_priority INTEGER, multi_name VARCHAR(256))"
[fswatch_new] fswatch not supported on your platform
[camera_control] creating new context 0xb2ae40
[camera_control] loaded 1891 camera drivers.
[sql] prepare "select count(id) from images where (flags & 256) != 256 and ((film_id in (select id from film_rolls where folder like '/home/roger/Images/test'))) order by filename, version limit ?1, ?2"
[sql] prepare "select count (distinct imgid) from selected_images"
[sql] prepare "delete from selected_images where imgid not in (select distinct id from images where (flags & 256) != 256 and ((film_id in (select id from film_rolls where folder like '/home/roger/Images/test'))) order by filename, version limit ?1, ?2)"
[sql] prepare "select count(id) from images where (flags & 256) != 256 and ((film_id in (select id from film_rolls where folder like '/home/roger/Images/test'))) order by filename, version"
[sql] prepare "select count (distinct imgid) from selected_images"
[pwstorage_new] Creating new context 0xacbd20
[pwstorage_new] no storage backend. not storing username/password. please change in preferences, core tab.
[opencl_init] opencl related configuration options:
[opencl_init]
[opencl_init] opencl: 1
[opencl_init] opencl_library: ''
[opencl_init] opencl_memory_requirement: 768
[opencl_init] opencl_memory_headroom: 300
[opencl_init] opencl_device_priority: '*/!0,*/*/*'
[opencl_init] opencl_size_roundup: 16
[opencl_init] opencl_async_pixelpipe: 0
[opencl_init] opencl_synch_cache: 0
[opencl_init] opencl_number_event_handles: 25
[opencl_init] opencl_micro_nap: 1000
[opencl_init] opencl_use_pinned_memory: 0
[opencl_init] opencl_use_cpu_devices: 0
[opencl_init] opencl_avoid_atomics: 0
[opencl_init] opencl_omit_whitebalance: 0
[opencl_init]
[opencl_init] could not find opencl runtime library 'libOpenCL'
[opencl_init] could not find opencl runtime library 'libOpenCL.so'
[opencl_init] could not find opencl runtime library 'libOpenCL.so.1'
[opencl_init] no working opencl library found. Continue with opencl disabled
[opencl_init] FINALLY: opencl is NOT AVAILABLE on this system.
[opencl_init] initial status of opencl enabled flag is OFF.
[memory] after cache initialization
[memory] max address space (vmpeak): 769600 kB
[memory] cur address space (vmsize): 643960 kB
[memory] max used memory (vmhwm ): 28136 kB
[memory] cur used memory (vmrss ): 28136 kB
[image_cache] has 131072 entries
[mipmap_cache_init] using no compression
[memory] after cache initialization
[memory] max address space (vmpeak): 769600 kB
[memory] cur address space (vmsize): 738172 kB
[memory] max used memory (vmhwm ): 122236 kB
[memory] cur used memory (vmrss ): 122236 kB
[mipmap_cache_init] cache has 8 entries for mip 3 ( 39,23 MB).
[memory] after cache initialization
[memory] max address space (vmpeak): 778352 kB
[memory] cur address space (vmsize): 778352 kB
[memory] max used memory (vmhwm ): 122468 kB
[memory] cur used memory (vmrss ): 122468 kB
[mipmap_cache_init] cache has 64 entries for mip 2 ( 78,47 MB).
[memory] after cache initialization
[memory] max address space (vmpeak): 858708 kB
[memory] cur address space (vmsize): 858708 kB
[memory] max used memory (vmhwm ): 122472 kB
[memory] cur used memory (vmrss ): 122472 kB
[mipmap_cache_init] cache has 256 entries for mip 1 ( 78,48 MB).
[memory] after cache initialization
[memory] max address space (vmpeak): 939236 kB
[memory] cur address space (vmsize): 939236 kB
[memory] max used memory (vmhwm ): 122476 kB
[memory] cur used memory (vmrss ): 122476 kB
[mipmap_cache_init] cache has 4096 entries for mip 0 ( 314,00 MB).
[memory] after cache initialization
[memory] max address space (vmpeak): 1260776 kB
[memory] cur address space (vmsize): 1260776 kB
[memory] max used memory (vmhwm ): 122644 kB
[memory] cur used memory (vmrss ): 122644 kB
[memory] after cache initialization
[memory] max address space (vmpeak): 1260776 kB
[memory] cur address space (vmsize): 1260776 kB
[memory] max used memory (vmhwm ): 122648 kB
[memory] cur used memory (vmrss ): 122648 kB
[screen resolution] setting the screen resolution to 96,000000 dpi
[sql] exec "DELETE FROM presets WHERE writeprotect = 1"
[sql] prepare "select name, description from styles where name like ?1 or description like ?1 order by name"
[sql] prepare "select name, description from styles where name like ?1 or description like ?1 order by name"
[input device] Input devices found:
Virtual core XTEST pointer (no cursor), source: GDK_SOURCE_MOUSE, mode: GDK_MODE_DISABLED, 2 axes, 0 keys
GDK_AXIS_X
GDK_AXIS_Y
AlpsPS/2 ALPS GlidePoint (no cursor), source: GDK_SOURCE_MOUSE, mode: GDK_MODE_DISABLED, 4 axes, 0 keys
GDK_AXIS_X
GDK_AXIS_Y
GDK_AXIS_PRESSURE
GDK_AXIS_XTILT
ALPS PS/2 Device (no cursor), source: GDK_SOURCE_MOUSE, mode: GDK_MODE_DISABLED, 2 axes, 0 keys
GDK_AXIS_X
GDK_AXIS_Y
MCE IR Keyboard/Mouse (ene_ir) (no cursor), source: GDK_SOURCE_MOUSE, mode: GDK_MODE_DISABLED, 2 axes, 248 keys
GDK_AXIS_X
GDK_AXIS_Y
Core Pointer (with cursor), source: GDK_SOURCE_MOUSE, mode: GDK_MODE_SCREEN, 2 axes, 0 keys
GDK_AXIS_X
GDK_AXIS_Y
[lighttable] expose took 0,0585 sec
[sql] prepare "select distinct id from images where id in (select imgid from selected_images) order by filename, version limit ?1"
[add_job] 0 | export | queue: 0 | priority: 0
[run_job+] 02 150012037,912091 export | queue: 0 | priority: 4
[sql] prepare "SELECT id FROM tags WHERE name = ?1"
[sql] prepare "SELECT id FROM tags WHERE name = ?1"
[sql] prepare "DELETE FROM tagged_images WHERE tagid = ?1 AND imgid = ?2"
[sql] prepare "INSERT OR REPLACE INTO tagged_images (imgid, tagid) VALUES (?1, ?2)"
[sql] prepare "select folder || '/' || filename from images, film_rolls where images.film_id = film_rolls.id and images.id = ?1"
[sql] prepare "select folder || '/' || filename from images, film_rolls where images.film_id = film_rolls.id and images.id = ?1"
[sql] prepare "select folder || '/' || filename from images, film_rolls where images.film_id = film_rolls.id and images.id = ?1"
[sql] prepare "UPDATE images SET width = ?1, height = ?2, maker = ?3, model = ?4, lens = ?5, exposure = ?6, aperture = ?7, iso = ?8, focal_length = ?9, focus_distance = ?10, film_id = ?11, datetime_taken = ?12, flags = ?13, crop = ?14, orientation = ?15, raw_parameters = ?16, group_id = ?17, longitude = ?18, latitude = ?19, color_matrix = ?20, colorspace = ?21, raw_black = ?22, raw_maximum = ?23 WHERE id = ?24"
[dev] took 0,000 secs (-0,000 CPU) to load the image.
[sql] prepare "select folder || '/' || filename from images, film_rolls where images.film_id = film_rolls.id and images.id = ?1"
[sql] prepare "select folder || '/' || filename from images, film_rolls where images.film_id = film_rolls.id and images.id = ?1"
[sql] prepare "select imgid, formid, form, name, version, points, points_count, source from mask where imgid = ?1"
[sql] prepare "select imgid, num, module, operation, op_params, enabled, blendop_params, blendop_version, multi_priority, multi_name from history where imgid = ?1 order by num"
[sql] prepare "SELECT id FROM styles WHERE name=?1 ORDER BY id DESC LIMIT 1"
[imageio_storage_disk] could not export to file: `/home/roger/Images/test/jpg/darktable/IMG_7158.jpg'!
bash_roger@Keynux ~ $ darktable -d all
[memory] at startup
[memory] max address space (vmpeak): 329520 kB
[memory] cur address space (vmsize): 329520 kB
[memory] max used memory (vmhwm ): 12528 kB
[memory] cur used memory (vmrss ): 12528 kB
[sql] exec "CREATE TABLE memory.color_labels_temp (imgid INTEGER PRIMARY KEY)"
[sql] exec "CREATE TABLE memory.collected_images (rowid INTEGER PRIMARY KEY AUTOINCREMENT, imgid INTEGER)"
[sql] exec "CREATE TABLE memory.tmp_selection (imgid INTEGER)"
[sql] exec "CREATE TABLE memory.tagq (tmpid INTEGER PRIMARY KEY, id INTEGER)"
[sql] exec "CREATE TABLE memory.taglist (tmpid INTEGER PRIMARY KEY, id INTEGER UNIQUE ON CONFLICT REPLACE, count INTEGER)"
[sql] exec "CREATE TABLE memory.history (imgid INTEGER, num INTEGER, module INTEGER, operation VARCHAR(256) UNIQUE ON CONFLICT REPLACE, op_params BLOB, enabled INTEGER, blendop_params BLOB, blendop_version INTEGER, multi_priority INTEGER, multi_name VARCHAR(256))"
[sql] exec "CREATE TABLE MEMORY.style_items (styleid INTEGER, num INTEGER, module INTEGER, operation VARCHAR(256), op_params BLOB, enabled INTEGER, blendop_params BLOB, blendop_version INTEGER, multi_priority INTEGER, multi_name VARCHAR(256))"
[fswatch_new] fswatch not supported on your platform
[camera_control] creating new context 0xb2ae40
[camera_control] loaded 1891 camera drivers.
[sql] prepare "select count(id) from images where (flags & 256) != 256 and ((film_id in (select id from film_rolls where folder like '/home/roger/Images/test'))) order by filename, version limit ?1, ?2"
[sql] prepare "select count (distinct imgid) from selected_images"
[sql] prepare "delete from selected_images where imgid not in (select distinct id from images where (flags & 256) != 256 and ((film_id in (select id from film_rolls where folder like '/home/roger/Images/test'))) order by filename, version limit ?1, ?2)"
[sql] prepare "select count(id) from images where (flags & 256) != 256 and ((film_id in (select id from film_rolls where folder like '/home/roger/Images/test'))) order by filename, version"
[sql] prepare "select count (distinct imgid) from selected_images"
[pwstorage_new] Creating new context 0xacbd20
[pwstorage_new] no storage backend. not storing username/password. please change in preferences, core tab.
[opencl_init] opencl related configuration options:
[opencl_init]
[opencl_init] opencl: 1
[opencl_init] opencl_library: ''
[opencl_init] opencl_memory_requirement: 768
[opencl_init] opencl_memory_headroom: 300
[opencl_init] opencl_device_priority: '*/!0,*/*/*'
[opencl_init] opencl_size_roundup: 16
[opencl_init] opencl_async_pixelpipe: 0
[opencl_init] opencl_synch_cache: 0
[opencl_init] opencl_number_event_handles: 25
[opencl_init] opencl_micro_nap: 1000
[opencl_init] opencl_use_pinned_memory: 0
[opencl_init] opencl_use_cpu_devices: 0
[opencl_init] opencl_avoid_atomics: 0
[opencl_init] opencl_omit_whitebalance: 0
[opencl_init]
[opencl_init] could not find opencl runtime library 'libOpenCL'
[opencl_init] could not find opencl runtime library 'libOpenCL.so'
[opencl_init] could not find opencl runtime library 'libOpenCL.so.1'
[opencl_init] no working opencl library found. Continue with opencl disabled
[opencl_init] FINALLY: opencl is NOT AVAILABLE on this system.
[opencl_init] initial status of opencl enabled flag is OFF.
[memory] after cache initialization
[memory] max address space (vmpeak): 769600 kB
[memory] cur address space (vmsize): 643960 kB
[memory] max used memory (vmhwm ): 28136 kB
[memory] cur used memory (vmrss ): 28136 kB
[image_cache] has 131072 entries
[mipmap_cache_init] using no compression
[memory] after cache initialization
[memory] max address space (vmpeak): 769600 kB
[memory] cur address space (vmsize): 738172 kB
[memory] max used memory (vmhwm ): 122236 kB
[memory] cur used memory (vmrss ): 122236 kB
[mipmap_cache_init] cache has 8 entries for mip 3 ( 39,23 MB).
[memory] after cache initialization
[memory] max address space (vmpeak): 778352 kB
[memory] cur address space (vmsize): 778352 kB
[memory] max used memory (vmhwm ): 122468 kB
[memory] cur used memory (vmrss ): 122468 kB
[mipmap_cache_init] cache has 64 entries for mip 2 ( 78,47 MB).
[memory] after cache initialization
[memory] max address space (vmpeak): 858708 kB
[memory] cur address space (vmsize): 858708 kB
[memory] max used memory (vmhwm ): 122472 kB
[memory] cur used memory (vmrss ): 122472 kB
[mipmap_cache_init] cache has 256 entries for mip 1 ( 78,48 MB).
[memory] after cache initialization
[memory] max address space (vmpeak): 939236 kB
[memory] cur address space (vmsize): 939236 kB
[memory] max used memory (vmhwm ): 122476 kB
[memory] cur used memory (vmrss ): 122476 kB
[mipmap_cache_init] cache has 4096 entries for mip 0 ( 314,00 MB).
[memory] after cache initialization
[memory] max address space (vmpeak): 1260776 kB
[memory] cur address space (vmsize): 1260776 kB
[memory] max used memory (vmhwm ): 122644 kB
[memory] cur used memory (vmrss ): 122644 kB
[memory] after cache initialization
[memory] max address space (vmpeak): 1260776 kB
[memory] cur address space (vmsize): 1260776 kB
[memory] max used memory (vmhwm ): 122648 kB
[memory] cur used memory (vmrss ): 122648 kB
[screen resolution] setting the screen resolution to 96,000000 dpi
[sql] exec "DELETE FROM presets WHERE writeprotect = 1"
[sql] prepare "select name, description from styles where name like ?1 or description like ?1 order by name"
[sql] prepare "select name, description from styles where name like ?1 or description like ?1 order by name"
[input device] Input devices found:
Virtual core XTEST pointer (no cursor), source: GDK_SOURCE_MOUSE, mode: GDK_MODE_DISABLED, 2 axes, 0 keys
GDK_AXIS_X
GDK_AXIS_Y
AlpsPS/2 ALPS GlidePoint (no cursor), source: GDK_SOURCE_MOUSE, mode: GDK_MODE_DISABLED, 4 axes, 0 keys
GDK_AXIS_X
GDK_AXIS_Y
GDK_AXIS_PRESSURE
GDK_AXIS_XTILT
ALPS PS/2 Device (no cursor), source: GDK_SOURCE_MOUSE, mode: GDK_MODE_DISABLED, 2 axes, 0 keys
GDK_AXIS_X
GDK_AXIS_Y
MCE IR Keyboard/Mouse (ene_ir) (no cursor), source: GDK_SOURCE_MOUSE, mode: GDK_MODE_DISABLED, 2 axes, 248 keys
GDK_AXIS_X
GDK_AXIS_Y
Core Pointer (with cursor), source: GDK_SOURCE_MOUSE, mode: GDK_MODE_SCREEN, 2 axes, 0 keys
GDK_AXIS_X
GDK_AXIS_Y
[lighttable] expose took 0,0585 sec
[sql] prepare "select distinct id from images where id in (select imgid from selected_images) order by filename, version limit ?1"
[add_job] 0 | export | queue: 0 | priority: 0
[run_job+] 02 150012037,912091 export | queue: 0 | priority: 4
[sql] prepare "SELECT id FROM tags WHERE name = ?1"
[sql] prepare "SELECT id FROM tags WHERE name = ?1"
[sql] prepare "DELETE FROM tagged_images WHERE tagid = ?1 AND imgid = ?2"
[sql] prepare "INSERT OR REPLACE INTO tagged_images (imgid, tagid) VALUES (?1, ?2)"
[sql] prepare "select folder || '/' || filename from images, film_rolls where images.film_id = film_rolls.id and images.id = ?1"
[sql] prepare "select folder || '/' || filename from images, film_rolls where images.film_id = film_rolls.id and images.id = ?1"
[sql] prepare "select folder || '/' || filename from images, film_rolls where images.film_id = film_rolls.id and images.id = ?1"
[sql] prepare "UPDATE images SET width = ?1, height = ?2, maker = ?3, model = ?4, lens = ?5, exposure = ?6, aperture = ?7, iso = ?8, focal_length = ?9, focus_distance = ?10, film_id = ?11, datetime_taken = ?12, flags = ?13, crop = ?14, orientation = ?15, raw_parameters = ?16, group_id = ?17, longitude = ?18, latitude = ?19, color_matrix = ?20, colorspace = ?21, raw_black = ?22, raw_maximum = ?23 WHERE id = ?24"
[dev] took 0,000 secs (-0,000 CPU) to load the image.
[sql] prepare "select folder || '/' || filename from images, film_rolls where images.film_id = film_rolls.id and images.id = ?1"
[sql] prepare "select folder || '/' || filename from images, film_rolls where images.film_id = film_rolls.id and images.id = ?1"
[sql] prepare "select imgid, formid, form, name, version, points, points_count, source from mask where imgid = ?1"
[sql] prepare "select imgid, num, module, operation, op_params, enabled, blendop_params, blendop_version, multi_priority, multi_name from history where imgid = ?1 order by num"
[sql] prepare "SELECT id FROM styles WHERE name=?1 ORDER BY id DESC LIMIT 1"
[imageio_storage_disk] could not export to file: `/home/roger/Images/test/jpg/darktable/IMG_7158.jpg'!
Merci pour cette nouvelle mouture et votre hyperréactivité


roger.bunivot Membre non connecté
-
- Voir le profil du membre roger.bunivot
- Inscrit le : 11/07/2009
- Site internet
après avoir fait un peu travailler le neurone, j'ai pensé que si ça marche chez les autres et pas chez moi, c'est qu' il doit y avoir un fichier de configuration corrompu quelque part.
dans un terminal j'ai fait une recherche avec ces paramètres en étant dans mon /home/roger/:
find ./ -iname "*darktable*"
./.config/darktable/
./.config/darktable/darktablerc
./.config/darktable/
./.config/darktable/darktablerc
J'ai donc renommer le dossier et relancer darktable:
mv ./.config/darktable ./.config/darktable_old
Miracle l'export fonctionne maintenant!


lewyssmith Membre non connecté
-
- Voir le profil du membre lewyssmith
- Inscrit le : 28/11/2014
Merci de vos essaies et récherche sur ce problème. Vous nous avez fourni assez d'évidence pour lacher la mise-à-jour.

Akien Membre non connecté
-
- Voir le profil du membre Akien
- Inscrit le : 12/06/2011
- Groupes :
-
Équipe Mageia
lewyssmith :
Vous nous avez fourni assez d'évidence pour lacher la mise-à-jour.
On utilise plutôt « publier » pour traduire "release", « lâcher » prenant parfois au sens figuré la connotation d'« abandonner »/"give up".

Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie