Mageia 5 rame rame et me mets en attente [Réglé]
pour plusieurs applis : attente disque
Système et matériels / Installation et configuration
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
Aurais-je un gros problème ?
Les applications "Dolphin, Digikam, Poubelle " sont systématiquement mises en "attente disque" depuis 2 jours, soit instantanément, soit à une sollicitation de la barre des menus.
J'ai 6 G°de MEV et au plus 25% d'occupé au total, il me reste 6G° dans le DD système (comprenant l'OS Mageia 5) et 200 G° sur 1T° sur le DD. J'ai une CG ATI Radeon 4670 et CM EP45-DS3 avec Intel 8400.
J'ai vérifié l'" Epinglé: Impossibilité de lancer certaines applications [erratum] " et j'ai la bonne config, même si je ne pense pas l'utiliser.
De plus, le système rame grave depuis l'install de Mageia 5, alors qu'il tournait parfaitement sur Mageia 5 Chaudron (j'ai mis à jour selon la méthode développée ici : [url=http://www.mageialinux-online.org/forum/topic-20315+comment-passer-cauldron-en-mageia-5.php#m194721][/url]
Dites-moi qu'il ne faut pas tout réinstaller
Merci de vos avis.
Cordialement, Dan
Édité par dantou Le 06/07/2015 à 01h11
Adrien.D Membre non connecté
-
- Voir le profil du membre Adrien.D
- Inscrit le : 30/05/2011
- Site internet
- Groupes :
que renvoie
Code BASH :
rpm -qa | grep mga6
Tu as peut être quelques paquets mageia 6 qui sèment la pagaille (mis à jour Cauldron vers 5 trop tard) ?
Config : PC Fixe : X470 GAMING PRO- AMD Ryzen 5 2600X - 16Go RAM - Radeon RX 560 (Pilote libre) - Gentoo Linux - GNOME Desktop - Kernel 5.10 LTS
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
rpm -qa | grep mga6 = rien
J'avais "vérifié" (en jetant un coup d'oeil sur les adresses et toutes étaient en m5, mais je n'ai pas encore travaillé sur ma grammaire interrogative et notamment sur grep). Mais donc il n'y a bien plus rien de chaudron.
J'ai laissé tourner le pc toute la nuit et ce matin il a l'air de s'être remis en un peu plus en forme. Est-ce que ça pourrait être la chaleur (il est entre 43 et 50 C°) ?
Merci
Édité par dantou Le 06/07/2015 à 08h14
Adrien.D Membre non connecté
-
- Voir le profil du membre Adrien.D
- Inscrit le : 30/05/2011
- Site internet
- Groupes :
Config : PC Fixe : X470 GAMING PRO- AMD Ryzen 5 2600X - 16Go RAM - Radeon RX 560 (Pilote libre) - Gentoo Linux - GNOME Desktop - Kernel 5.10 LTS
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
Visiteur
A tout hasard, peux tu donner le retour - en root - de la commande smartctl
Exemple pour un disque dur sur /dev/sda
Code TEXT :
smartctl -a /dev/sda
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
La réponse est simple :
"#smartctl -a /dev/sda
bash: smartctl : commande introuvable
C'est quoi smartctl ?
Cordialement,
Merci, dan
Adrien.D Membre non connecté
-
- Voir le profil du membre Adrien.D
- Inscrit le : 30/05/2011
- Site internet
- Groupes :
Cela permet de diagnostiquer l'état du disque dur
Config : PC Fixe : X470 GAMING PRO- AMD Ryzen 5 2600X - 16Go RAM - Radeon RX 560 (Pilote libre) - Gentoo Linux - GNOME Desktop - Kernel 5.10 LTS
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
Merci de ton intervention.
Voilà :
Caché :
[root@localhost Images]# smartctl -a /dev/sda
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.19.8-desktop-3.mga5] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K1000.B
Device Model: Hitachi HDT721010SLA360
Serial Number: STN604MR3V3NAP
LU WWN Device Id: 5 000cca 349f625e2
Firmware Version: ST6OA3AA
User Capacity: 1 000 203 804 160 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Jul 6 13:15:32 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
SMART Disabled. Use option -s with argument 'on' to enable it.
(override with '-T permissive' option)
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.19.8-desktop-3.mga5] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K1000.B
Device Model: Hitachi HDT721010SLA360
Serial Number: STN604MR3V3NAP
LU WWN Device Id: 5 000cca 349f625e2
Firmware Version: ST6OA3AA
User Capacity: 1 000 203 804 160 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Jul 6 13:15:32 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Disabled
SMART Disabled. Use option -s with argument 'on' to enable it.
(override with '-T permissive' option)
Qu'en penses-tu ?
Adrien.D Membre non connecté
-
- Voir le profil du membre Adrien.D
- Inscrit le : 30/05/2011
- Site internet
- Groupes :
L'activer en root avec
Code BASH :
smartctl --smart=on /dev/sda
puis refaire l'analyse avec la commande donnée par sylvain
Config : PC Fixe : X470 GAMING PRO- AMD Ryzen 5 2600X - 16Go RAM - Radeon RX 560 (Pilote libre) - Gentoo Linux - GNOME Desktop - Kernel 5.10 LTS
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
seb95 Membre non connecté
-
- Voir le profil du membre seb95
- Inscrit le : 26/08/2007
- Site internet
- Groupes :
Repars de zero ça sera mieux
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
Et voici le rapport complet qu'il vient de sortir quand je l'ai réveillé. C'est la suite de ce qu'il a fait précédemment. Il s'était peut-être endormi avec l'ordi.:
Caché :
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 25) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 634) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 117) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 096 006 Pre-fail Always - 206815214
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2491
5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 28
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 157952263
9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 18943
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 6
12 Power_Cycle_Count 0x0032 097 037 020 Old_age Always - 3391
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 127
188 Command_Timeout 0x0032 100 084 000 Old_age Always - 98788643180
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 066 059 045 Old_age Always - 34 (Min/Max 31/34)
194 Temperature_Celsius 0x0022 034 041 000 Old_age Always - 34 (0 12 0 0 0)
195 Hardware_ECC_Recovered 0x001a 047 026 000 Old_age Always - 206815214
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 127 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 127 occurred at disk power-on lifetime: 12041 hours (501 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 00:54:14.133 READ DMA EXT
27 00 00 00 00 00 e0 00 00:54:14.131 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:54:14.128 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:54:14.126 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:54:14.125 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 126 occurred at disk power-on lifetime: 12041 hours (501 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 00:54:11.031 READ DMA EXT
ca 00 08 49 04 95 e2 00 00:54:11.030 WRITE DMA
ca 00 08 29 25 e1 e1 00 00:54:11.029 WRITE DMA
c8 00 08 81 79 d6 e1 00 00:54:11.024 READ DMA
c8 00 08 39 79 d6 e1 00 00:54:11.023 READ DMA
Error 125 occurred at disk power-on lifetime: 12041 hours (501 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 00:54:07.976 READ DMA EXT
27 00 00 00 00 00 e0 00 00:54:07.974 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:54:07.971 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:54:07.950 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:54:07.884 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 124 occurred at disk power-on lifetime: 12041 hours (501 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 00:54:04.960 READ DMA EXT
ea 00 00 ff ff ff af 00 00:54:01.511 FLUSH CACHE EXT
ca 00 10 61 a4 19 e2 00 00:54:01.511 WRITE DMA
ca 00 08 29 e7 1c e4 00 00:54:01.510 WRITE DMA
ea 00 00 ff ff ff af 00 00:54:01.479 FLUSH CACHE EXT
Error 123 occurred at disk power-on lifetime: 12041 hours (501 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 00:53:52.701 READ DMA EXT
27 00 00 00 00 00 e0 00 00:53:52.699 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:53:52.696 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:53:52.693 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:53:52.671 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 25) The self-test routine was aborted by
the host.
Total time to complete Offline
data collection: ( 634) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 117) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x103b) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 119 096 006 Pre-fail Always - 206815214
3 Spin_Up_Time 0x0003 094 094 000 Pre-fail Always - 0
4 Start_Stop_Count 0x0032 098 098 020 Old_age Always - 2491
5 Reallocated_Sector_Ct 0x0033 099 099 036 Pre-fail Always - 28
7 Seek_Error_Rate 0x000f 081 060 030 Pre-fail Always - 157952263
9 Power_On_Hours 0x0032 079 079 000 Old_age Always - 18943
10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 6
12 Power_Cycle_Count 0x0032 097 037 020 Old_age Always - 3391
184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
187 Reported_Uncorrect 0x0032 001 001 000 Old_age Always - 127
188 Command_Timeout 0x0032 100 084 000 Old_age Always - 98788643180
189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
190 Airflow_Temperature_Cel 0x0022 066 059 045 Old_age Always - 34 (Min/Max 31/34)
194 Temperature_Celsius 0x0022 034 041 000 Old_age Always - 34 (0 12 0 0 0)
195 Hardware_ECC_Recovered 0x001a 047 026 000 Old_age Always - 206815214
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
ATA Error Count: 127 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 127 occurred at disk power-on lifetime: 12041 hours (501 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 00:54:14.133 READ DMA EXT
27 00 00 00 00 00 e0 00 00:54:14.131 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:54:14.128 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:54:14.126 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:54:14.125 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 126 occurred at disk power-on lifetime: 12041 hours (501 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 00:54:11.031 READ DMA EXT
ca 00 08 49 04 95 e2 00 00:54:11.030 WRITE DMA
ca 00 08 29 25 e1 e1 00 00:54:11.029 WRITE DMA
c8 00 08 81 79 d6 e1 00 00:54:11.024 READ DMA
c8 00 08 39 79 d6 e1 00 00:54:11.023 READ DMA
Error 125 occurred at disk power-on lifetime: 12041 hours (501 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 00:54:07.976 READ DMA EXT
27 00 00 00 00 00 e0 00 00:54:07.974 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:54:07.971 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:54:07.950 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:54:07.884 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 124 occurred at disk power-on lifetime: 12041 hours (501 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 00:54:04.960 READ DMA EXT
ea 00 00 ff ff ff af 00 00:54:01.511 FLUSH CACHE EXT
ca 00 10 61 a4 19 e2 00 00:54:01.511 WRITE DMA
ca 00 08 29 e7 1c e4 00 00:54:01.510 WRITE DMA
ea 00 00 ff ff ff af 00 00:54:01.479 FLUSH CACHE EXT
Error 123 occurred at disk power-on lifetime: 12041 hours (501 days + 17 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
25 00 08 ff ff ff ef 00 00:53:52.701 READ DMA EXT
27 00 00 00 00 00 e0 00 00:53:52.699 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 00 00:53:52.696 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:53:52.693 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 00 00:53:52.671 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Maintenant, en postant, je prends connaissance de l'activation qui ne s'était pas déclenchée.
J'applique smartctl --smart=on /dev/sda, puis refais smartctl -a /dev/sda, qui me rend cela :
Caché :
[root@localhost Images]# smartctl -a /dev/sda
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.19.8-desktop-3.mga5] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K1000.B
Device Model: Hitachi HDT721010SLA360
Serial Number: STN604MR3V3NAP
LU WWN Device Id: 5 000cca 349f625e2
Firmware Version: ST6OA3AA
User Capacity: 1 000 203 804 160 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Jul 6 19:25:56 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (14090) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 235) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 054 Pre-fail Offline - 84
3 Spin_Up_Time 0x0007 126 126 024 Pre-fail Always - 475 (Average 437)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 3093
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 28
9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 19792
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3008
192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 3496
193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 3496
194 Temperature_Celsius 0x0002 150 150 000 Old_age Always - 40 (Min/Max 17/51)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[root@localhost Images]#
smartctl 6.3 2014-07-26 r3976 [x86_64-linux-3.19.8-desktop-3.mga5] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Hitachi Deskstar 7K1000.B
Device Model: Hitachi HDT721010SLA360
Serial Number: STN604MR3V3NAP
LU WWN Device Id: 5 000cca 349f625e2
Firmware Version: ST6OA3AA
User Capacity: 1 000 203 804 160 bytes [1,00 TB]
Sector Size: 512 bytes logical/physical
Rotation Rate: 7200 rpm
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 3.0 Gb/s
Local Time is: Mon Jul 6 19:25:56 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (14090) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 235) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 100 100 016 Pre-fail Always - 0
2 Throughput_Performance 0x0005 100 100 054 Pre-fail Offline - 84
3 Spin_Up_Time 0x0007 126 126 024 Pre-fail Always - 475 (Average 437)
4 Start_Stop_Count 0x0012 100 100 000 Old_age Always - 3093
5 Reallocated_Sector_Ct 0x0033 100 100 005 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 100 100 067 Pre-fail Always - 0
8 Seek_Time_Performance 0x0005 100 100 020 Pre-fail Offline - 28
9 Power_On_Hours 0x0012 098 098 000 Old_age Always - 19792
10 Spin_Retry_Count 0x0013 100 100 060 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 3008
192 Power-Off_Retract_Count 0x0032 098 098 000 Old_age Always - 3496
193 Load_Cycle_Count 0x0012 098 098 000 Old_age Always - 3496
194 Temperature_Celsius 0x0002 150 150 000 Old_age Always - 40 (Min/Max 17/51)
196 Reallocated_Event_Count 0x0032 100 100 000 Old_age Always - 0
197 Current_Pending_Sector 0x0022 100 100 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0008 100 100 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x000a 200 200 000 Old_age Always - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
[root@localhost Images]#
Que faut-il penser de tout çes résultats ?
Je précise, pour Seb95, que je viens de tout réinstaller. Suite à une maj de M4 fin janvier, mon ordi passait comme en veille au lieu de s'éteindre. Il ne passait plus par le bios, par Grub, ni le double boot avec Windows... avant de ne plus démarrer du tout. J'ai essayé de réinstaller mais il ne lisait plus les CD ni DVD de Mageia4 ! Ubuntu oui, Mageia3 oui, mais 4 non. En désespoir de cause, j'ai téléchargé Chaudron de Mageia 5 et ai tout réinstallé avec formatage. Et j'ai suspendu le double boot en attendant l'arrivée d'un Synology.
Quand Mageia 5 est sortie, j'ai vu la manip simplissime pour repasser dessus. Et depuis, c'est l'apologie de la paresse ...
Voila pour la petite histoire.
Donc, j'essaie de durer encore un peu, ce qui me permet de tester mon nouveau réseau, puis je réinstallerai tout.
En attendant de vouslire, je vous remercie.
Cordialement, dan
Édité par dantou Le 06/07/2015 à 19h45
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie