Forum

bonjour,



je suis parti pour la semaine.mon système marchait très bien mais qd je suis rentré ce week end ,rien ne se passe après m'etre authentifié:



je reviens systématiquement sur l'authentification kdm qd je rentre mon mot de passe



dmesg:



<span class="formatter-hide">Caché:</span><div class="hide" onclick="bb_hide(this)"><div class="hide2">[ 0.000000] Initializing cgroup subsys cpuset

[ 0.000000] Initializing cgroup subsys cpu

[ 0.000000] Linux version 3.8.13.4-desktop-1.mga3 (iurt@jonund.mageia.org) (gcc version 4.7.2 (GCC) ) #1 SMP Thu Jul 4 13:56:21 UTC 2013

[ 0.000000] Command line: BOOT_IMAGE=linux root=UUID=aa2b2f0a-c60f-4bfc-a0b3-d33244edf722 splash quiet nokmsboot resume=UUID=93620077-c9a8-48ed-a1af-4199a9065c03 vga=788

[ 0.000000] e820: BIOS-provided physical RAM map:

[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable

[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ddb3cfff] usable

[ 0.000000] BIOS-e820: [mem 0x00000000ddb3d000-0x00000000ddb6ffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000ddb70000-0x00000000dde33fff] usable

[ 0.000000] BIOS-e820: [mem 0x00000000dde34000-0x00000000dded1fff] ACPI NVS

[ 0.000000] BIOS-e820: [mem 0x00000000dded2000-0x00000000dea4bfff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000dea4c000-0x00000000dea4cfff] usable

[ 0.000000] BIOS-e820: [mem 0x00000000dea4d000-0x00000000dec52fff] ACPI NVS

[ 0.000000] BIOS-e820: [mem 0x00000000dec53000-0x00000000df072fff] usable

[ 0.000000] BIOS-e820: [mem 0x00000000df073000-0x00000000df7f3fff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000df7f4000-0x00000000df7fffff] usable

[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved

[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved

[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000021effffff] usable

[ 0.000000] NX (Execute Disable) protection: active

[ 0.000000] SMBIOS 2.7 present.

[ 0.000000] DMI: MSI MS-7721/FM2-A55M-E33 (MS-7721), BIOS V10.5 03/19/2013

[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved

[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable

[ 0.000000] No AGP bridge found

[ 0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000

[ 0.000000] MTRR default type: uncachable

[ 0.000000] MTRR fixed ranges enabled:

[ 0.000000] 00000-9FFFF write-back

[ 0.000000] A0000-BFFFF write-through

[ 0.000000] C0000-CDFFF write-protect

[ 0.000000] CE000-E7FFF uncachable

[ 0.000000] E8000-FFFFF write-protect

[ 0.000000] MTRR variable ranges enabled:

[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back

[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back

[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back

[ 0.000000] 3 base 0000DF800000 mask FFFFFF800000 uncachable

[ 0.000000] 4 disabled

[ 0.000000] 5 disabled

[ 0.000000] 6 disabled

[ 0.000000] 7 disabled

[ 0.000000] TOM2: 000000021f000000 aka 8688M

[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106

[ 0.000000] e820: update [mem 0xdf800000-0xffffffff] usable ==> reserved

[ 0.000000] e820: last_pfn = 0xdf800 max_arch_pfn = 0x400000000

[ 0.000000] found SMP MP-table at [mem 0x000fd7c0-0x000fd7cf] mapped at [ffff8800000fd7c0]

[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]

[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576

[ 0.000000] Using GB pages for direct mapping

[ 0.000000] init_memory_mapping: [mem 0x00000000-0xdf7fffff]

[ 0.000000] [mem 0x00000000-0xbfffffff] page 1G

[ 0.000000] [mem 0xc0000000-0xdf7fffff] page 2M

[ 0.000000] kernel direct mapping tables up to 0xdf7fffff @ [mem 0x1fffe000-0x1fffffff]

[ 0.000000] init_memory_mapping: [mem 0x100001000-0x21effffff]

[ 0.000000] [mem 0x100001000-0x1001fffff] page 4k

[ 0.000000] [mem 0x100200000-0x13fffffff] page 2M

[ 0.000000] [mem 0x140000000-0x1ffffffff] page 1G

[ 0.000000] [mem 0x200000000-0x21effffff] page 2M

[ 0.000000] kernel direct mapping tables up to 0x21effffff @ [mem 0xdf7fc000-0xdf7fffff]

[ 0.000000] RAMDISK: [mem 0x37713000-0x37feffff]

[ 0.000000] ACPI: RSDP 00000000000f0490 00024 (v02 ALASKA)

[ 0.000000] ACPI: XSDT 00000000ddec0070 00064 (v01 ALASKA A M I 01072009 AMI 00010013)

[ 0.000000] ACPI: FACP 00000000ddec6318 0010C (v05 ALASKA A M I 01072009 AMI 00010013)

[ 0.000000] ACPI BIOS Bug: Warning: Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20121018/tbfadt-598)

[ 0.000000] ACPI: DSDT 00000000ddec0170 061A4 (v02 ALASKA A M I 00000000 INTL 20051117)

[ 0.000000] ACPI: FACS 00000000ddec7080 00040

[ 0.000000] ACPI: APIC 00000000ddec6428 00072 (v03 ALASKA A M I 01072009 AMI 00010013)

[ 0.000000] ACPI: FPDT 00000000ddec64a0 00044 (v01 ALASKA A M I 01072009 AMI 00010013)

[ 0.000000] ACPI: MCFG 00000000ddec64e8 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)

[ 0.000000] ACPI: HPET 00000000ddec6528 00038 (v01 ALASKA A M I 01072009 AMI 00000005)

[ 0.000000] ACPI: SSDT 00000000ddec6560 004B7 (v02 AMD ALIB 00000001 MSFT 04000000)

[ 0.000000] ACPI: IVRS 00000000ddec6a18 00070 (v02 AMD AMDIOMMU 00000001 AMD 00000000)

[ 0.000000] ACPI: CRAT 00000000ddec6a88 001F8 (v01 AMD AGESA 00000001 AMD 00000001)

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] No NUMA configuration found

[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]

[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x21effffff]

[ 0.000000] NODE_DATA [mem 0x21effc000-0x21effffff]

[ 0.000000] [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216600000-ffff88021e5fffff] on node 0

[ 0.000000] Zone ranges:

[ 0.000000] DMA [mem 0x00010000-0x00ffffff]

[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]

[ 0.000000] Normal [mem 0x100000000-0x21effffff]

[ 0.000000] Movable zone start for each node

[ 0.000000] Early memory node ranges

[ 0.000000] node 0: [mem 0x00010000-0x0009dfff]

[ 0.000000] node 0: [mem 0x00100000-0xddb3cfff]

[ 0.000000] node 0: [mem 0xddb70000-0xdde33fff]

[ 0.000000] node 0: [mem 0xdea4c000-0xdea4cfff]

[ 0.000000] node 0: [mem 0xdec53000-0xdf072fff]

[ 0.000000] node 0: [mem 0xdf7f4000-0xdf7fffff]

[ 0.000000] node 0: [mem 0x100001000-0x21effffff]

[ 0.000000] On node 0 totalpages: 2085307

[ 0.000000] DMA zone: 64 pages used for memmap

[ 0.000000] DMA zone: 6 pages reserved

[ 0.000000] DMA zone: 3912 pages, LIFO batch:0

[ 0.000000] DMA32 zone: 14153 pages used for memmap

[ 0.000000] DMA32 zone: 891621 pages, LIFO batch:31

[ 0.000000] Normal zone: 18368 pages used for memmap

[ 0.000000] Normal zone: 1157183 pages, LIFO batch:31

[ 0.000000] ACPI: PM-Timer IO Port: 0x808

[ 0.000000] ACPI: Local APIC address 0xfee00000

[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x14] disabled)

[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x15] disabled)

[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])

[ 0.000000] ACPI: IOAPIC (id[0x03] address[0xfec00000] gsi_base[0])

[ 0.000000] IOAPIC[0]: apic_id 3, version 33, address 0xfec00000, GSI 0-23

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)

[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)

[ 0.000000] ACPI: IRQ0 used by override.

[ 0.000000] ACPI: IRQ2 used by override.

[ 0.000000] ACPI: IRQ9 used by override.

[ 0.000000] Using ACPI (MADT) for SMP configuration information

[ 0.000000] ACPI: HPET id: 0x10228210 base: 0xfed00000

[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs

[ 0.000000] nr_irqs_gsi: 40

[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000

[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000

[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000

[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000

[ 0.000000] PM: Registered nosave memory: 00000000ddb3d000 - 00000000ddb70000

[ 0.000000] PM: Registered nosave memory: 00000000dde34000 - 00000000dded2000

[ 0.000000] PM: Registered nosave memory: 00000000dded2000 - 00000000dea4c000

[ 0.000000] PM: Registered nosave memory: 00000000dea4d000 - 00000000dec53000

[ 0.000000] PM: Registered nosave memory: 00000000df073000 - 00000000df7f4000

[ 0.000000] PM: Registered nosave memory: 00000000df800000 - 00000000fec00000

[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000

[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000

[ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000

[ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000

[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000

[ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed40000

[ 0.000000] PM: Registered nosave memory: 00000000fed40000 - 00000000fed45000

[ 0.000000] PM: Registered nosave memory: 00000000fed45000 - 00000000fed80000

[ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000

[ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000ff000000

[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000

[ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000

[ 0.000000] e820: [mem 0xdf800000-0xfebfffff] available for PCI devices

[ 0.000000] Booting paravirtualized kernel on bare hardware

[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1

[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88021ec00000 s83584 r8192 d22912 u524288

[ 0.000000] pcpu-alloc: s83584 r8192 d22912 u524288 alloc=1*2097152

[ 0.000000] pcpu-alloc: [0] 0 1 2 3

[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2052716

[ 0.000000] Policy zone: Normal

[ 0.000000] Kernel command line: BOOT_IMAGE=linux root=UUID=aa2b2f0a-c60f-4bfc-a0b3-d33244edf722 splash quiet nokmsboot resume=UUID=93620077-c9a8-48ed-a1af-4199a9065c03 vga=788

[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)

[ 0.000000] __ex_table already sorted, skipping sort

[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340

[ 0.000000] Checking aperture...

[ 0.000000] No AGP bridge found

[ 0.000000] Node 0: aperture @ 0 size 32 MB

[ 0.000000] Your BIOS doesn't leave a aperture memory hole

[ 0.000000] Please enable the IOMMU option in the BIOS setup

[ 0.000000] This costs you 64 MB of RAM

[ 0.000000] Mapping aperture over 65536 KB of RAM @ d4000000

[ 0.000000] PM: Registered nosave memory: 00000000d4000000 - 00000000d8000000

[ 0.000000] Memory: 8055932k/8896512k available (6047k kernel code, 555284k absent, 285296k reserved, 4973k data, 868k init)

[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1

[ 0.000000] Hierarchical RCU implementation.

[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.

[ 0.000000] NR_IRQS:4352 nr_irqs:712 16

[ 0.000000] Extended CMOS year: 2000

[ 0.000000] Console: colour dummy device 80x25

[ 0.000000] console [tty0] enabled

[ 0.000000] hpet clockevent registered

[ 0.000000] tsc: Fast TSC calibration using PIT

[ 0.001000] tsc: Detected 4020.103 MHz processor

[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 8040.20 BogoMIPS (lpj=4020103)

[ 0.000004] pid_max: default: 32768 minimum: 301

[ 0.000021] Security Framework initialized

[ 0.000029] TOMOYO Linux initialized

[ 0.000463] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)

[ 0.002482] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)

[ 0.003384] Mount-cache hash table entries: 256

[ 0.003517] Initializing cgroup subsys cpuacct

[ 0.003519] Initializing cgroup subsys devices

[ 0.003520] Initializing cgroup subsys freezer

[ 0.003521] Initializing cgroup subsys net_cls

[ 0.003522] Initializing cgroup subsys blkio

[ 0.003539] tseg: 00df800000

[ 0.003541] CPU: Physical Processor ID: 0

[ 0.003541] CPU: Processor Core ID: 0

[ 0.003542] mce: CPU supports 7 MCE banks

[ 0.003553] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512

Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512

tlb_flushall_shift: 5

[ 0.003646] Freeing SMP alternatives: 24k freed

[ 0.004332] ACPI: Core revision 20121018

[ 0.008248] ftrace: allocating 21955 entries in 86 pages

[ 0.096082] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1

[ 0.106057] smpboot: CPU0: AMD A6-5400K APU with Radeon(tm) HD Graphics (fam: 15, model: 10, stepping: 01)

[ 0.207083] Performance Events:

[ 0.207085] perf: AMD core performance counters detected

[ 0.207087] AMD PMU driver.

[ 0.207088] ... version: 0

[ 0.207089] ... bit width: 48

[ 0.207090] ... generic registers: 6

[ 0.207091] ... value mask: 0000ffffffffffff

[ 0.207092] ... max period: 00007fffffffffff

[ 0.207093] ... fixed-purpose events: 0

[ 0.207094] ... event mask: 000000000000003f

[ 0.208083] MCE: In-kernel MCE decoding enabled.

[ 0.208160] smpboot: Booting Node 0, Processors #1

[ 0.221254] Brought up 2 CPUs

[ 0.221257] smpboot: Total of 2 processors activated (16080.41 BogoMIPS)

[ 0.221663] devtmpfs: initialized

[ 0.222912] PM: Registering ACPI NVS region [mem 0xdde34000-0xdded1fff] (647168 bytes)

[ 0.222922] PM: Registering ACPI NVS region [mem 0xdea4d000-0xdec52fff] (2121728 bytes)

[ 0.223543] RTC time: 13:48:44, date: 11/10/13

[ 0.223578] NET: Registered protocol family 16

[ 0.223723] ACPI: bus type pci registered

[ 0.223765] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[ 0.223767] PCI: not using MMCONFIG

[ 0.223768] PCI: Using configuration type 1 for base access

[ 0.223769] PCI: Using configuration type 1 for extended access

[ 0.224367] bio: create slab <bio-0> at 0

[ 0.224417] ACPI: Added _OSI(Module Device)

[ 0.224418] ACPI: Added _OSI(Processor Device)

[ 0.224419] ACPI: Added _OSI(3.0 _SCP Extensions)

[ 0.224421] ACPI: Added _OSI(Processor Aggregator Device)

[ 0.225226] ACPI: EC: Look up EC in DSDT

[ 0.226226] ACPI: Executed 1 blocks of module-level executable AML code

[ 0.228648] ACPI: Interpreter enabled

[ 0.228651] ACPI: (supports S0 S3 S4 S5)

[ 0.228666] ACPI: Using IOAPIC for interrupt routing

[ 0.228790] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)

[ 0.228823] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources

[ 0.252831] ACPI: No dock devices found.

[ 0.252836] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug

[ 0.253001] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])

[ 0.253003] ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT]

[ 0.253470] PCI host bridge to bus 0000:00

[ 0.253473] pci_bus 0000:00: root bus resource [bus 00-ff]

[ 0.253475] pci_bus 0000:00: root bus resource [io 0x0000-0x03af]

[ 0.253476] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7]

[ 0.253478] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df]

[ 0.253479] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]

[ 0.253481] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]

[ 0.253482] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]

[ 0.253484] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff]

[ 0.253490] pci 0000:00:00.0: [1022:1410] type 00 class 0x060000

[ 0.253516] pci 0000:00:00.2: [1022:1419] type 00 class 0x080600

[ 0.253567] pci 0000:00:02.0: [1022:1412] type 01 class 0x060400

[ 0.253603] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold

[ 0.253618] pci 0000:00:04.0: [1022:1414] type 01 class 0x060400

[ 0.253652] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold

[ 0.253682] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601

[ 0.253697] pci 0000:00:11.0: reg 10: [io 0xf040-0xf047]

[ 0.253704] pci 0000:00:11.0: reg 14: [io 0xf030-0xf033]

[ 0.253712] pci 0000:00:11.0: reg 18: [io 0xf020-0xf027]

[ 0.253719] pci 0000:00:11.0: reg 1c: [io 0xf010-0xf013]

[ 0.253726] pci 0000:00:11.0: reg 20: [io 0xf000-0xf00f]

[ 0.253734] pci 0000:00:11.0: reg 24: [mem 0xfe20b000-0xfe20b7ff]

[ 0.253779] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310

[ 0.253789] pci 0000:00:12.0: reg 10: [mem 0xfe20a000-0xfe20afff]

[ 0.253845] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320

[ 0.253859] pci 0000:00:12.2: reg 10: [mem 0xfe209000-0xfe2090ff]

[ 0.253923] pci 0000:00:12.2: supports D1 D2

[ 0.253924] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot

[ 0.253945] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310

[ 0.253955] pci 0000:00:13.0: reg 10: [mem 0xfe208000-0xfe208fff]

[ 0.254011] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320

[ 0.254025] pci 0000:00:13.2: reg 10: [mem 0xfe207000-0xfe2070ff]

[ 0.254089] pci 0000:00:13.2: supports D1 D2

[ 0.254090] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot

[ 0.254108] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500

[ 0.254169] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300

[ 0.254185] pci 0000:00:14.2: reg 10: [mem 0xfe200000-0xfe203fff 64bit]

[ 0.254236] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold

[ 0.254247] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100

[ 0.254307] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401

[ 0.254340] pci 0000:00:14.5: [1022:7809] type 00 class 0x0c0310

[ 0.254350] pci 0000:00:14.5: reg 10: [mem 0xfe206000-0xfe206fff]

[ 0.254403] pci 0000:00:16.0: [1022:7807] type 00 class 0x0c0310

[ 0.254413] pci 0000:00:16.0: reg 10: [mem 0xfe205000-0xfe205fff]

[ 0.254468] pci 0000:00:16.2: [1022:7808] type 00 class 0x0c0320

[ 0.254482] pci 0000:00:16.2: reg 10: [mem 0xfe204000-0xfe2040ff]

[ 0.254546] pci 0000:00:16.2: supports D1 D2

[ 0.254547] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot

[ 0.254564] pci 0000:00:18.0: [1022:1400] type 00 class 0x060000

[ 0.254579] pci 0000:00:18.1: [1022:1401] type 00 class 0x060000

[ 0.254592] pci 0000:00:18.2: [1022:1402] type 00 class 0x060000

[ 0.254606] pci 0000:00:18.3: [1022:1403] type 00 class 0x060000

[ 0.254624] pci 0000:00:18.4: [1022:1404] type 00 class 0x060000

[ 0.254637] pci 0000:00:18.5: [1022:1405] type 00 class 0x060000

[ 0.254689] pci 0000:01:00.0: [10de:0e22] type 00 class 0x030000

[ 0.254698] pci 0000:01:00.0: reg 10: [mem 0xfc000000-0xfdffffff]

[ 0.254708] pci 0000:01:00.0: reg 14: [mem 0xf0000000-0xf7ffffff 64bit pref]

[ 0.254717] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xfbffffff 64bit pref]

[ 0.254724] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]

[ 0.254730] pci 0000:01:00.0: reg 30: [mem 0xfe000000-0xfe07ffff pref]

[ 0.254786] pci 0000:01:00.1: [10de:0beb] type 00 class 0x040300

[ 0.254795] pci 0000:01:00.1: reg 10: [mem 0xfe080000-0xfe083fff]

[ 0.256034] pci 0000:00:02.0: PCI bridge to [bus 01]

[ 0.256050] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]

[ 0.256053] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe0fffff]

[ 0.256057] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]

[ 0.256097] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000

[ 0.256110] pci 0000:02:00.0: reg 10: [io 0xd000-0xd0ff]

[ 0.256129] pci 0000:02:00.0: reg 18: [mem 0xfe104000-0xfe104fff 64bit pref]

[ 0.256142] pci 0000:02:00.0: reg 20: [mem 0xfe100000-0xfe103fff 64bit pref]

[ 0.256196] pci 0000:02:00.0: supports D1 D2

[ 0.256197] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold

[ 0.258023] pci 0000:00:04.0: PCI bridge to [bus 02]

[ 0.258042] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]

[ 0.258045] pci 0000:00:04.0: bridge window [mem 0xfe100000-0xfe1fffff]

[ 0.258101] pci 0000:00:14.4: PCI bridge to [bus 03] (subtractive decode)

[ 0.258108] pci 0000:00:14.4: bridge window [io 0x0000-0x03af] (subtractive decode)

[ 0.258110] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7] (subtractive decode)

[ 0.258111] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df] (subtractive decode)

[ 0.258112] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)

[ 0.258114] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)

[ 0.258115] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)

[ 0.258117] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode)

[ 0.258151] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P0PC._PRT]

[ 0.258231] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PC00._PRT]

[ 0.258258] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PC02._PRT]

[ 0.258371] pci0000:00: Requesting ACPI _OSC control (0x1d)

[ 0.258525] pci0000:00: ACPI _OSC request failed (AE_SUPPORT), returned control mask: 0x0d

[ 0.258526] ACPI _OSC control for PCIe not granted, disabling ASPM

[ 0.259447] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0

[ 0.259500] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0

[ 0.259554] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0

[ 0.259608] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0

[ 0.259650] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0

[ 0.259685] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0

[ 0.259717] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0

[ 0.259748] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0

[ 0.259820] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none

[ 0.259821] vgaarb: loaded

[ 0.259822] vgaarb: bridge control possible 0000:01:00.0

[ 0.259874] SCSI subsystem initialized

[ 0.259876] ACPI: bus type scsi registered

[ 0.259913] libata version 3.00 loaded.

[ 0.259983] PCI: Using ACPI for IRQ routing

[ 0.266585] PCI: pci_cache_line_size set to 64 bytes

[ 0.266637] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]

[ 0.266638] e820: reserve RAM buffer [mem 0xddb3d000-0xdfffffff]

[ 0.266640] e820: reserve RAM buffer [mem 0xdde34000-0xdfffffff]

[ 0.266641] e820: reserve RAM buffer [mem 0xdea4d000-0xdfffffff]

[ 0.266642] e820: reserve RAM buffer [mem 0xdf073000-0xdfffffff]

[ 0.266643] e820: reserve RAM buffer [mem 0xdf800000-0xdfffffff]

[ 0.266644] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]

[ 0.266712] NetLabel: Initializing

[ 0.266713] NetLabel: domain hash size = 128

[ 0.266714] NetLabel: protocols = UNLABELED CIPSOv4

[ 0.266722] NetLabel: unlabeled traffic allowed by default

[ 0.266748] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0

[ 0.266751] hpet0: 3 comparators, 32-bit 14.318180 MHz counter

[ 0.268768] Switching to clocksource hpet

[ 0.273479] pnp: PnP ACPI init

[ 0.273492] ACPI: bus type pnp registered

[ 0.273595] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved

[ 0.273598] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)

[ 0.274057] system 00:01: [io 0x04d0-0x04d1] has been reserved

[ 0.274059] system 00:01: [io 0x040b] has been reserved

[ 0.274061] system 00:01: [io 0x04d6] has been reserved

[ 0.274062] system 00:01: [io 0x0c00-0x0c01] has been reserved

[ 0.274064] system 00:01: [io 0x0c14] has been reserved

[ 0.274066] system 00:01: [io 0x0c50-0x0c51] has been reserved

[ 0.274067] system 00:01: [io 0x0c52] has been reserved

[ 0.274069] system 00:01: [io 0x0c6c] has been reserved

[ 0.274070] system 00:01: [io 0x0c6f] has been reserved

[ 0.274072] system 00:01: [io 0x0cd0-0x0cd1] has been reserved

[ 0.274073] system 00:01: [io 0x0cd2-0x0cd3] has been reserved

[ 0.274075] system 00:01: [io 0x0cd4-0x0cd5] has been reserved

[ 0.274076] system 00:01: [io 0x0cd6-0x0cd7] has been reserved

[ 0.274078] system 00:01: [io 0x0cd8-0x0cdf] has been reserved

[ 0.274079] system 00:01: [io 0x0800-0x089f] has been reserved

[ 0.274081] system 00:01: [io 0x0b20-0x0b3f] has been reserved

[ 0.274083] system 00:01: [io 0x0900-0x090f] has been reserved

[ 0.274084] system 00:01: [io 0x0910-0x091f] has been reserved

[ 0.274086] system 00:01: [io 0xfe00-0xfefe] has been reserved

[ 0.274088] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved

[ 0.274090] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved

[ 0.274092] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved

[ 0.274094] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved

[ 0.274095] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved

[ 0.274097] system 00:01: [mem 0xfed00000-0xfed00fff] has been reserved

[ 0.274099] system 00:01: [mem 0xff000000-0xffffffff] has been reserved

[ 0.274101] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.274208] system 00:02: [io 0x0a00-0x0a1f] has been reserved

[ 0.274210] system 00:02: [io 0x0600-0x060f] has been reserved

[ 0.274212] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.274258] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)

[ 0.274464] pnp 00:04: [dma 0 disabled]

[ 0.274495] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)

[ 0.274790] pnp 00:05: [dma 3]

[ 0.274886] pnp 00:05: Plug and Play ACPI device, IDs PNP0401 (active)

[ 0.274895] pnp 00:06: [dma 4]

[ 0.274908] pnp 00:06: Plug and Play ACPI device, IDs PNP0200 (active)

[ 0.274930] pnp 00:07: Plug and Play ACPI device, IDs PNP0b00 (active)

[ 0.274946] pnp 00:08: Plug and Play ACPI device, IDs PNP0800 (active)

[ 0.274987] system 00:09: [io 0x04d0-0x04d1] has been reserved

[ 0.274989] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.275012] pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)

[ 0.275038] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.275163] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.275227] system 00:0d: [mem 0xfeb80000-0xfebfffff] could not be reserved

[ 0.275229] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)

[ 0.275359] pnp 00:0e: Plug and Play ACPI device, IDs PNP0103 (active)

[ 0.275362] pnp: PnP ACPI: found 15 devices

[ 0.275363] ACPI: ACPI bus type pnp unregistered

[ 0.281472] pci 0000:00:02.0: PCI bridge to [bus 01]

[ 0.281476] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]

[ 0.281479] pci 0000:00:02.0: bridge window [mem 0xfc000000-0xfe0fffff]

[ 0.281481] pci 0000:00:02.0: bridge window [mem 0xf0000000-0xfbffffff 64bit pref]

[ 0.281484] pci 0000:00:04.0: PCI bridge to [bus 02]

[ 0.281486] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]

[ 0.281489] pci 0000:00:04.0: bridge window [mem 0xfe100000-0xfe1fffff]

[ 0.281493] pci 0000:00:14.4: PCI bridge to [bus 03]

[ 0.281524] pci_bus 0000:00: resource 4 [io 0x0000-0x03af]

[ 0.281526] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7]

[ 0.281527] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df]

[ 0.281529] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff]

[ 0.281530] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff]

[ 0.281532] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff]

[ 0.281533] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xffffffff]

[ 0.281535] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]

[ 0.281536] pci_bus 0000:01: resource 1 [mem 0xfc000000-0xfe0fffff]

[ 0.281537] pci_bus 0000:01: resource 2 [mem 0xf0000000-0xfbffffff 64bit pref]

[ 0.281539] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]

[ 0.281540] pci_bus 0000:02: resource 1 [mem 0xfe100000-0xfe1fffff]

[ 0.281542] pci_bus 0000:03: resource 4 [io 0x0000-0x03af]

[ 0.281543] pci_bus 0000:03: resource 5 [io 0x03e0-0x0cf7]

[ 0.281544] pci_bus 0000:03: resource 6 [io 0x03b0-0x03df]

[ 0.281546] pci_bus 0000:03: resource 7 [io 0x0d00-0xffff]

[ 0.281547] pci_bus 0000:03: resource 8 [mem 0x000a0000-0x000bffff]

[ 0.281548] pci_bus 0000:03: resource 9 [mem 0x000c0000-0x000dffff]

[ 0.281550] pci_bus 0000:03: resource 10 [mem 0xf0000000-0xffffffff]

[ 0.281574] NET: Registered protocol family 2

[ 0.281728] TCP established hash table entries: 65536 (order: 8, 1048576 bytes)

[ 0.281991] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)

[ 0.282194] TCP: Hash tables configured (established 65536 bind 65536)

[ 0.282224] TCP: reno registered

[ 0.282236] UDP hash table entries: 4096 (order: 5, 131072 bytes)

[ 0.282272] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)

[ 0.282356] NET: Registered protocol family 1

[ 0.570077] pci 0000:01:00.0: Boot video device

[ 0.570091] PCI: CLS 64 bytes, default 64

[ 0.570135] Trying to unpack rootfs image as initramfs...

[ 0.637540] Freeing initrd memory: 9076k freed

[ 0.639595] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40

[ 0.639597] AMD-Vi: Extended features: PreF PPR GT IA

[ 0.639600] AMD-Vi: Interrupt remapping enabled

[ 0.639624] pci 0000:00:00.2: irq 40 for MSI/MSI-X

[ 0.649036] AMD-Vi: Lazy IO/TLB flushing enabled

[ 0.649460] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)

[ 0.649463] software IO TLB [mem 0xd9b3d000-0xddb3d000] (64MB) mapped at [ffff8800d9b3d000-ffff8800ddb3cfff]

[ 0.649544] LVT offset 0 assigned for vector 0x400

[ 0.649564] perf: AMD IBS detected (0x000000ff)

[ 0.649724] audit: initializing netlink socket (disabled)

[ 0.649735] type=2000 audit(1384091324.466:1): initialized

[ 0.666658] HugeTLB registered 2 MB page size, pre-allocated 0 pages

[ 0.667971] VFS: Disk quotas dquot_6.5.2

[ 0.668002] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)

[ 0.668387] Btrfs loaded

[ 0.668390] msgmni has been set to 15752

[ 0.668611] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)

[ 0.668633] io scheduler noop registered

[ 0.668636] io scheduler deadline registered

[ 0.668652] io scheduler cfq registered (default)

[ 0.668788] vesafb: mode is 800x600x16, linelength=1600, pages=2

[ 0.668789] vesafb: scrolling: redraw

[ 0.668791] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0

[ 0.668928] vesafb: framebuffer at 0xf9000000, mapped to 0xffffc90010f00000, using 1875k, total 14336k

[ 0.683355] Console: switching to colour frame buffer device 100x37

[ 0.697551] fb0: VESA VGA frame buffer device

[ 0.697580] GHES: HEST is not enabled!

[ 0.697613] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled

[ 0.718023] 00:04: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A

[ 0.718309] Linux agpgart interface v0.103

[ 0.719246] brd: module loaded

[ 0.719309] ahci 0000:00:11.0: version 3.0

[ 0.719367] ahci 0000:00:11.0: irq 41 for MSI/MSI-X

[ 0.719446] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode

[ 0.719448] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part

[ 0.719970] scsi0 : ahci

[ 0.720032] scsi1 : ahci

[ 0.720077] scsi2 : ahci

[ 0.720123] scsi3 : ahci

[ 0.720167] scsi4 : ahci

[ 0.720210] scsi5 : ahci

[ 0.720258] ata1: SATA max UDMA/133 abar m2048@0xfe20b000 port 0xfe20b100 irq 41

[ 0.720260] ata2: SATA max UDMA/133 abar m2048@0xfe20b000 port 0xfe20b180 irq 41

[ 0.720262] ata3: SATA max UDMA/133 abar m2048@0xfe20b000 port 0xfe20b200 irq 41

[ 0.720264] ata4: SATA max UDMA/133 abar m2048@0xfe20b000 port 0xfe20b280 irq 41

[ 0.720266] ata5: SATA max UDMA/133 abar m2048@0xfe20b000 port 0xfe20b300 irq 41

[ 0.720268] ata6: SATA max UDMA/133 abar m2048@0xfe20b000 port 0xfe20b380 irq 41

[ 0.720364] i8042: PNP: PS/2 Controller [PNP0303S2K] at 0x60,0x64 irq 1

[ 0.720366] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp

[ 0.720481] serio: i8042 KBD port at 0x60,0x64 irq 1

[ 0.720584] mousedev: PS/2 mouse device common for all mice

[ 0.720644] rtc_cmos 00:07: RTC can wake from S4

[ 0.720726] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0

[ 0.720747] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs

[ 0.720753] cpuidle: using governor ladder

[ 0.720754] cpuidle: using governor menu

[ 0.720757] ledtrig-cpu: registered to indicate activity on CPUs

[ 0.720759] EFI Variables Facility v0.08 2004-May-17

[ 0.720882] TCP: cubic registered

[ 0.720888] Key type dns_resolver registered

[ 0.721067] PM: Checking hibernation image partition UUID=93620077-c9a8-48ed-a1af-4199a9065c03

[ 0.739633] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0

[ 1.024744] ata5: SATA link down (SStatus 0 SControl 300)

[ 1.024768] ata6: SATA link down (SStatus 0 SControl 300)

[ 1.178300] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 1.178321] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)

[ 1.179211] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 1.179230] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)

[ 1.180182] ata3.00: ATA-7: Hitachi HDT725025VLA380, V5DOA7BA, max UDMA/133

[ 1.180195] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[ 1.181225] ata3.00: configured for UDMA/133

[ 1.181988] ata4.00: ATA-8: WDC WD10EARS-22Y5B1, 80.00A80, max UDMA/133

[ 1.181991] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[ 1.183893] ata4.00: configured for UDMA/133

[ 1.189468] ata2.00: ATA-9: INTEL SSDSC2CT060A3, 300i, max UDMA/133

[ 1.189476] ata2.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA

[ 1.199362] ata2.00: configured for UDMA/133

[ 1.225802] ata1.00: ATA-7: MAXTOR STM3320820AS, 3.AAE, max UDMA/133

[ 1.225810] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)

[ 1.283942] ata1.00: configured for UDMA/133

[ 1.284049] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM332082 3.AA PQ: 0 ANSI: 5

[ 1.284163] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)

[ 1.284203] sd 0:0:0:0: [sda] Write Protect is off

[ 1.284205] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00

[ 1.284221] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.284224] scsi 1:0:0:0: Direct-Access ATA INTEL SSDSC2CT06 300i PQ: 0 ANSI: 5

[ 1.284292] sd 1:0:0:0: [sdb] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)

[ 1.284361] scsi 2:0:0:0: Direct-Access ATA Hitachi HDT72502 V5DO PQ: 0 ANSI: 5

[ 1.284444] sd 1:0:0:0: [sdb] Write Protect is off

[ 1.284447] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00

[ 1.284475] sd 2:0:0:0: [sdc] 488397168 512-byte logical blocks: (250 GB/232 GiB)

[ 1.284499] scsi 3:0:0:0: Direct-Access ATA WDC WD10EARS-22Y 80.0 PQ: 0 ANSI: 5

[ 1.284509] sd 2:0:0:0: [sdc] Write Protect is off

[ 1.284511] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00

[ 1.284526] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.284565] sd 3:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)

[ 1.284567] sd 3:0:0:0: [sdd] 4096-byte physical blocks

[ 1.284594] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.284602] sd 3:0:0:0: [sdd] Write Protect is off

[ 1.284604] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00

[ 1.284620] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[ 1.285492] sdb: sdb1 sdb2 < sdb5 sdb6 >

[ 1.285730] sd 1:0:0:0: [sdb] Attached SCSI disk

[ 1.294961] sdc: sdc1

[ 1.295168] sd 2:0:0:0: [sdc] Attached SCSI disk

[ 1.314223] sdd: sdd1 sdd4 < sdd5 >

[ 1.314489] sd 3:0:0:0: [sdd] Attached SCSI disk

[ 1.323532] sda: sda1

[ 1.323737] sd 0:0:0:0: [sda] Attached SCSI disk

[ 1.323745] PM: Hibernation image not present or could not be loaded.

[ 1.323758] registered taskstats version 1

[ 1.324290] Magic number: 5:946:836

[ 1.324348] rtc_cmos 00:07: setting system clock to 2013-11-10 13:48:46 UTC (1384091326)

[ 1.324350] BIOS EDD facility v0.16 2004-Jun-25, 5 devices found

[ 1.326251] Freeing unused kernel memory: 868k freed

[ 1.326419] Write protecting the kernel read-only data: 10240k

[ 1.326879] Freeing unused kernel memory: 84k freed

[ 1.331866] Freeing unused kernel memory: 1384k freed

[ 1.351314] dracut: dracut-3 dracut-025-

[ 1.403093] systemd-udevd[132]: starting version 195

[ 1.429138] dracut: Starting plymouth daemon

[ 1.647876] tsc: Refined TSC clocksource calibration: 4020.055 MHz

[ 1.647881] Switching to clocksource tsc

[ 2.291221] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1

[ 2.291227] ACPI: Power Button [PWRB]

[ 2.291267] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2

[ 2.291269] ACPI: Power Button [PWRF]

[ 2.298229] wmi: Mapper loaded

[ 2.315526] ACPI: bus type usb registered

[ 2.315553] usbcore: registered new interface driver usbfs

[ 2.315562] usbcore: registered new interface driver hub

[ 2.315602] usbcore: registered new device driver usb

[ 2.330110] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver

[ 2.330161] ohci_hcd 0000:00:12.0: OHCI Host Controller

[ 2.330168] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1

[ 2.330194] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe20a000

[ 2.330869] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver

[ 2.330872] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after

[ 2.331621] ehci-pci: EHCI PCI platform driver

[ 2.384875] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001

[ 2.384878] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.384880] usb usb1: Product: OHCI Host Controller

[ 2.384882] usb usb1: Manufacturer: Linux 3.8.13.4-desktop-1.mga3 ohci_hcd

[ 2.384883] usb usb1: SerialNumber: 0000:00:12.0

[ 2.384986] hub 1-0:1.0: USB hub found

[ 2.384992] hub 1-0:1.0: 5 ports detected

[ 2.385114] ohci_hcd 0000:00:13.0: OHCI Host Controller

[ 2.385118] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2

[ 2.385132] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe208000

[ 2.439674] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001

[ 2.439678] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.439680] usb usb2: Product: OHCI Host Controller

[ 2.439681] usb usb2: Manufacturer: Linux 3.8.13.4-desktop-1.mga3 ohci_hcd

[ 2.439683] usb usb2: SerialNumber: 0000:00:13.0

[ 2.439812] hub 2-0:1.0: USB hub found

[ 2.439818] hub 2-0:1.0: 5 ports detected

[ 2.439935] ehci-pci 0000:00:12.2: EHCI Host Controller

[ 2.439941] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 3

[ 2.439951] QUIRK: Enable AMD PLL fix

[ 2.439953] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround

[ 2.439963] ehci-pci 0000:00:12.2: debug port 1

[ 2.440013] ehci-pci 0000:00:12.2: irq 17, io mem 0xfe209000

[ 2.445591] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00

[ 2.445623] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002

[ 2.445624] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.445626] usb usb3: Product: EHCI Host Controller

[ 2.445627] usb usb3: Manufacturer: Linux 3.8.13.4-desktop-1.mga3 ehci_hcd

[ 2.445629] usb usb3: SerialNumber: 0000:00:12.2

[ 2.445718] hub 3-0:1.0: USB hub found

[ 2.445722] hub 3-0:1.0: 5 ports detected

[ 2.445828] ehci-pci 0000:00:13.2: EHCI Host Controller

[ 2.445832] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4

[ 2.445835] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround

[ 2.445844] ehci-pci 0000:00:13.2: debug port 1

[ 2.445866] ehci-pci 0000:00:13.2: irq 17, io mem 0xfe207000

[ 2.451580] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00

[ 2.451620] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002

[ 2.451622] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.451623] usb usb4: Product: EHCI Host Controller

[ 2.451625] usb usb4: Manufacturer: Linux 3.8.13.4-desktop-1.mga3 ehci_hcd

[ 2.451626] usb usb4: SerialNumber: 0000:00:13.2

[ 2.451729] hub 4-0:1.0: USB hub found

[ 2.451733] hub 4-0:1.0: 5 ports detected

[ 2.451842] ehci-pci 0000:00:16.2: EHCI Host Controller

[ 2.451846] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 5

[ 2.451849] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround

[ 2.451858] ehci-pci 0000:00:16.2: debug port 1

[ 2.451883] ehci-pci 0000:00:16.2: irq 17, io mem 0xfe204000

[ 2.457637] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00

[ 2.457675] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002

[ 2.457677] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.457678] usb usb5: Product: EHCI Host Controller

[ 2.457680] usb usb5: Manufacturer: Linux 3.8.13.4-desktop-1.mga3 ehci_hcd

[ 2.457681] usb usb5: SerialNumber: 0000:00:16.2

[ 2.457787] hub 5-0:1.0: USB hub found

[ 2.457792] hub 5-0:1.0: 4 ports detected

[ 2.458162] ohci_hcd 0000:00:14.5: OHCI Host Controller

[ 2.458169] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6

[ 2.458186] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe206000

[ 2.512506] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001

[ 2.512509] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.512511] usb usb6: Product: OHCI Host Controller

[ 2.512513] usb usb6: Manufacturer: Linux 3.8.13.4-desktop-1.mga3 ohci_hcd

[ 2.512514] usb usb6: SerialNumber: 0000:00:14.5

[ 2.512620] hub 6-0:1.0: USB hub found

[ 2.512626] hub 6-0:1.0: 2 ports detected

[ 2.512711] ohci_hcd 0000:00:16.0: OHCI Host Controller

[ 2.512715] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7

[ 2.512730] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe205000

[ 2.567352] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001

[ 2.567355] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1

[ 2.567357] usb usb7: Product: OHCI Host Controller

[ 2.567359] usb usb7: Manufacturer: Linux 3.8.13.4-desktop-1.mga3 ohci_hcd

[ 2.567360] usb usb7: SerialNumber: 0000:00:16.0

[ 2.567467] hub 7-0:1.0: USB hub found

[ 2.567473] hub 7-0:1.0: 4 ports detected

[ 2.746822] usb 3-2: new high-speed USB device number 2 using ehci-pci

[ 2.829669] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]

[ 2.829674] PM: Marking nosave pages: [mem 0xddb3d000-0xddb6ffff]

[ 2.829676] PM: Marking nosave pages: [mem 0xdde34000-0xdea4bfff]

[ 2.829719] PM: Marking nosave pages: [mem 0xdea4d000-0xdec52fff]

[ 2.829727] PM: Marking nosave pages: [mem 0xdf073000-0xdf7f3fff]

[ 2.829755] PM: Marking nosave pages: [mem 0xdf800000-0x100000fff]

[ 2.830015] PM: Marking nosave pages: [mem 0xd4000000-0xd7ffffff]

[ 2.830297] PM: Basic memory bitmaps created

[ 2.866383] usb 3-2: New USB device found, idVendor=18a5, idProduct=0302

[ 2.866389] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3

[ 2.866391] usb 3-2: Product: STORE N GO

[ 2.866393] usb 3-2: Manufacturer: Verbatim

[ 2.866395] usb 3-2: SerialNumber: 070B2B614D828036

[ 2.870688] Initializing USB Mass Storage driver...

[ 2.870805] scsi6 : usb-storage 3-2:1.0

[ 2.870965] usbcore: registered new interface driver usb-storage

[ 2.870966] USB Mass Storage support registered.

[ 2.881355] PM: Basic memory bitmaps freed

[ 2.884131] PM: Starting manual resume from disk

[ 2.884136] PM: Hibernation image partition 8:21 present

[ 2.884137] PM: Looking for hibernation image.

[ 2.884254] PM: Image not found (code -22)

[ 2.884255] PM: Hibernation image not present or could not be loaded.

[ 2.890484] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)

[ 2.900000] dracut: Checking ext4: /dev/disk/by-uuid/aa2b2f0a-c60f-4bfc-a0b3-d33244edf722

[ 2.900034] dracut: issuing e2fsck -a /dev/disk/by-uuid/aa2b2f0a-c60f-4bfc-a0b3-d33244edf722

[ 2.903611] dracut: /dev/disk/by-uuid/aa2b2f0a-c60f-4bfc-a0b3-d33244edf722: clean, 410815/788416 files, 2514829/3148484 blocks

[ 2.904842] dracut: Mounting /dev/disk/by-uuid/aa2b2f0a-c60f-4bfc-a0b3-d33244edf722 with -o acl,relatime

[ 2.907668] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: acl

[ 2.913194] dracut: Mounted root filesystem /dev/sdb1

[ 2.932892] dracut: Switching root

[ 2.933868] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.

[ 3.014140] systemd[1]: systemd 195 running in system mode. (+PAM +LIBWRAP +AUDIT -SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; mageia)

[ 3.030061] systemd[1]: Inserted module 'autofs4'

[ 3.030369] systemd[1]: Set hostname to <localhost>.

[ 3.086424] systemd[1]: Starting Replay Read-Ahead Data...

[ 3.097954] systemd[1]: Starting Collect Read-Ahead Data...

[ 3.099288] systemd-readahead[363]: Bumped block_nr parameter of 8:16 to 20480. This is a temporary hack and should be removed one day.

[ 3.106864] systemd[1]: Starting Login Prompts.

[ 3.106929] systemd[1]: Reached target Login Prompts.

[ 3.106947] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.

[ 3.107005] systemd[1]: Started Forward Password Requests to Wall Directory Watch.

[ 3.107012] systemd[1]: Starting RPC Port Mapper.

[ 3.107051] systemd[1]: Reached target RPC Port Mapper.

[ 3.107063] systemd[1]: Starting Syslog Socket.

[ 3.107141] systemd[1]: Listening on Syslog Socket.

[ 3.107157] systemd[1]: Starting Remote File Systems.

[ 3.107195] systemd[1]: Reached target Remote File Systems.

[ 3.107210] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.

[ 3.107267] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.

[ 3.107278] systemd[1]: Starting Delayed Shutdown Socket.

[ 3.107332] systemd[1]: Listening on Delayed Shutdown Socket.

[ 3.107350] systemd[1]: Starting Encrypted Volumes.

[ 3.107387] systemd[1]: Reached target Encrypted Volumes.

[ 3.107409] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.

[ 3.107530] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.

[ 3.107547] systemd[1]: Expecting device dev-disk-byx2duuid-93620077x2dc9a8x2d48edx2da1afx2d4199a9065c03.device...

[ 3.107644] systemd[1]: Starting udev Kernel Socket.

[ 3.107716] systemd[1]: Listening on udev Kernel Socket.

[ 3.107763] systemd[1]: Starting udev Control Socket.

[ 3.107825] systemd[1]: Listening on udev Control Socket.

[ 3.107838] systemd[1]: Expecting device dev-disk-byx2duuid-4786641ax2d6747x2d4a38x2da9d1x2d595bfb63a46d.device...

[ 3.107881] systemd[1]: Expecting device dev-disk-byx2duuid-b9305eadx2d6f33x2d4d32x2d81a3x2d5fbff086d947.device...

[ 3.107914] systemd[1]: Expecting device dev-disk-byx2duuid-038c166cx2d3871x2d4212x2dbf8ex2da401ee5d448f.device...

[ 3.107948] systemd[1]: Expecting device dev-disk-byx2duuid-26589d70x2de181x2d499dx2d9791x2dd1070ebdea95.device...

[ 3.107981] systemd[1]: Expecting device dev-disk-byx2duuid-12fe1a8ex2d9866x2d4647x2db401x2dce50e67c4e7a.device...

[ 3.108023] systemd[1]: Starting Journal Socket.

[ 3.108099] systemd[1]: Listening on Journal Socket.

[ 3.108117] systemd[1]: Starting Syslog.

[ 3.108157] systemd[1]: Reached target Syslog.

[ 3.108176] systemd[1]: Starting Configure read-only root support...

[ 3.122914] systemd[1]: Started Import network configuration from initramfs.

[ 3.122971] systemd[1]: Starting udev Kernel Device Manager...

[ 3.135745] systemd[1]: Starting Set default kernel console loglevel...

[ 3.146826] systemd-udevd[366]: starting version 195

[ 3.147475] systemd[1]: Starting udev Coldplug all Devices...

[ 3.156699] systemd[1]: Mounting Debug File System...

[ 3.170615] systemd[1]: Starting Journal Service...

[ 3.178677] systemd[1]: Started Journal Service.

[ 3.180471] systemd[1]: Mounting Huge Pages File System...

[ 3.193641] systemd[1]: Mounting POSIX Message Queue File System...

[ 3.206922] systemd[1]: Started Replay Read-Ahead Data.

[ 3.207089] systemd[1]: Started Collect Read-Ahead Data.

[ 3.207208] systemd[1]: Started udev Kernel Device Manager.

[ 3.217454] systemd[1]: Started Configure read-only root support.

[ 3.228427] systemd[1]: Started Set default kernel console loglevel.

[ 3.242705] systemd[1]: Mounted Debug File System.

[ 3.242928] systemd[1]: Mounted Huge Pages File System.

[ 3.243097] systemd[1]: Mounted POSIX Message Queue File System.

[ 3.243474] systemd[1]: Starting Load legacy module configuration...

[ 3.256407] systemd[1]: Started File System Check on Root Device.

[ 3.256441] systemd[1]: Starting Remount Root and Kernel File Systems...

[ 3.265610] systemd[1]: Starting Apply Kernel Variables...

[ 3.271833] parport_pc 00:05: reported by Plug and Play ACPI

[ 3.271881] parport0: PC-style at 0x378, irq 7 [PCSPP]

[ 3.272634] EXT4-fs (sdb1): re-mounted. Opts: acl

[ 3.279507] systemd[1]: Started Set Up Additional Binary Formats.

[ 3.280277] systemd[1]: Starting Load Kernel Modules...

[ 3.288895] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded

[ 3.289098] r8169 0000:02:00.0: irq 42 for MSI/MSI-X

[ 3.289403] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffc90000c76000, d4:3d:7e:52:1c:b7, XID 0c900800 IRQ 42

[ 3.289406] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]

[ 3.291304] systemd[1]: Starting Setup Virtual Console...

[ 3.308250] systemd[1]: Started udev Coldplug all Devices.

[ 3.309455] fuse init (API version 7.20)

[ 3.314218] systemd[1]: Started Remount Root and Kernel File Systems.

[ 3.314466] systemd[1]: fedora-loadmodules.service: main process exited, code=exited, status=1/FAILURE

[ 3.320207] systemd[1]: Failed to start Load legacy module configuration.

[ 3.320218] systemd[1]: Unit fedora-loadmodules.service entered failed state

[ 3.325613] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0

[ 3.326202] systemd[1]: Started Apply Kernel Variables.

[ 3.331190] systemd[1]: Started Load Kernel Modules.

[ 3.331312] systemd[1]: Mounted Configuration File System.

[ 3.331330] systemd[1]: Mounting FUSE Control File System...

[ 3.343409] systemd[1]: Starting Local File Systems (Pre).

[ 3.343458] systemd[1]: Reached target Local File Systems (Pre).

[ 3.343472] systemd[1]: Mounting Temporary Directory...

[ 3.344658] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. (To see the over-mounted files, please manually mount the underlying file system to a secondary location.)

[ 3.354082] systemd[1]: Starting Load Random Seed...

[ 3.364215] systemd[1]: Starting udev Wait for Complete Device Initialization...

[ 3.374335] systemd[1]: Mounted Temporary Directory.

[ 3.374451] systemd[1]: Mounted FUSE Control File System.

[ 3.375221] microcode: CPU0: patch_level=0x06001119

[ 3.380075] systemd[1]: Started Setup Virtual Console.

[ 3.381188] microcode: CPU1: patch_level=0x06001119

[ 3.381234] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba

[ 3.386054] systemd[1]: Started Load Random Seed.

[ 3.397667] hda-intel 0000:00:14.2: Using LPIB position fix

[ 3.405196] hda-intel 0000:00:14.2: Enable sync_write for stable communication

[ 3.418240] SKU: Nid=0x1d sku_cfg=0x4005c603

[ 3.418243] SKU: port_connectivity=0x1

[ 3.418244] SKU: enable_pcbeep=0x0

[ 3.418245] SKU: check_sum=0x00000005

[ 3.418246] SKU: customization=0x000000c6

[ 3.418248] SKU: external_amp=0x0

[ 3.418248] SKU: platform_type=0x0

[ 3.418250] SKU: swap=0x1

[ 3.418251] SKU: override=0x1

[ 3.418256] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line

[ 3.418258] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)

[ 3.418260] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)

[ 3.418261] mono: mono_out=0x0

[ 3.418262] inputs:

[ 3.418264] Front Mic=0x19

[ 3.418267] Rear Mic=0x18

[ 3.418268] Line=0x1a

[ 3.423737] realtek: No valid SSID, checking pincfg 0x4005c603 for NID 0x1d

[ 3.423740] realtek: Enabling init ASM_ID=0xc603 CODEC_ID=10ec0887

[ 3.441044] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:14.2/sound/card0/input3

[ 3.441127] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input4

[ 3.441183] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:14.2/sound/card0/input5

[ 3.441529] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6

[ 3.442062] input: HD-Audio Generic Line Out as /devices/pci0000:00/0000:00:14.2/sound/card0/input7

[ 3.442307] hda_intel: Disabling MSI

[ 3.442317] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client

[ 3.449583] hda-intel 0000:01:00.1: Enable delay in RIRB handling

[ 3.462956] systemd[1]: Found device WDC_WD10EARS-22Y5B1.

[ 3.462988] systemd[1]: Starting File System Check on /dev/disk/by-uuid/12fe1a8e-9866-4647-b401-ce50e67c4e7a...

[ 3.488458] nvidia: module license 'NVIDIA' taints kernel.

[ 3.488462] Disabling lock debugging due to kernel taint

[ 3.504941] systemd[1]: Found device WDC_WD10EARS-22Y5B1.

[ 3.504970] systemd[1]: Starting File System Check on /dev/disk/by-uuid/26589d70-e181-499d-9791-d1070ebdea95...

[ 3.513500] ppdev: user-space parallel port driver

[ 3.516825] kvm: Nested Virtualization enabled

[ 3.516829] kvm: Nested Paging enabled

[ 3.523111] systemd[1]: Found device Hitachi_HDT725025VLA380.

[ 3.523137] systemd[1]: Starting File System Check on /dev/disk/by-uuid/038c166c-3871-4212-bf8e-a401ee5d448f...

[ 3.523662] systemd-udevd[386]: renamed network interface eth0 to eth1

[ 3.535109] systemd[1]: Found device INTEL_SSDSC2CT060A3.

[ 3.535185] systemd[1]: Starting File System Check on /dev/disk/by-uuid/4786641a-6747-4a38-a9d1-595bfb63a46d...

[ 3.548064] systemd[1]: Found device INTEL_SSDSC2CT060A3.

[ 3.548102] systemd[1]: Activating swap /dev/disk/by-uuid/93620077-c9a8-48ed-a1af-4199a9065c03...

[ 3.564591] Adding 4087272k swap on /dev/sdb5. Priority:-1 extents:1 across:4087272k SS

[ 3.565853] systemd[1]: Activated swap /dev/disk/by-uuid/93620077-c9a8-48ed-a1af-4199a9065c03.

[ 3.565981] systemd[1]: Starting Swap.

[ 3.566063] systemd[1]: Reached target Swap.

[ 3.618880] systemd[1]: Started File System Check on /dev/disk/by-uuid/4786641a-6747-4a38-a9d1-595bfb63a46d.

[ 3.621340] systemd[1]: Started File System Check on /dev/disk/by-uuid/038c166c-3871-4212-bf8e-a401ee5d448f.

[ 3.626325] systemd[1]: Started File System Check on /dev/disk/by-uuid/12fe1a8e-9866-4647-b401-ce50e67c4e7a.

[ 3.626393] systemd[1]: Mounting /mnt/sdd5...

[ 3.642291] systemd[1]: Mounting /mnt/sdc1...

[ 3.668189] systemd[1]: Mounting /home...

[ 3.673056] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)

[ 3.680428] systemd[1]: Mounted /mnt/sdc1.

[ 3.689864] EXT4-fs (sdb6): mounted filesystem with ordered data mode. Opts: acl

[ 3.692453] systemd[1]: Found device MAXTOR_STM3320820AS.

[ 3.692475] systemd[1]: Starting File System Check on /dev/disk/by-uuid/b9305ead-6f33-4d32-81a3-5fbff086d947...

[ 3.714350] systemd[1]: Mounted /home.

[ 3.743850] EXT4-fs (sdd5): mounted filesystem with ordered data mode. Opts: (null)

[ 3.744122] systemd[1]: Mounted /mnt/sdd5.

[ 3.759856] usb 1-5: new full-speed USB device number 2 using ohci_hcd

[ 3.761083] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input8

[ 3.761157] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input9

[ 3.761269] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input10

[ 3.761320] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card1/input11

[ 3.761646] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem

[ 3.761767] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 319.60 Wed Sep 25 14:28:26 PDT 2013

[ 3.765211] systemd[1]: Starting Sound Card.

[ 3.765253] systemd[1]: Reached target Sound Card.

[ 3.798885] systemd[1]: Started udev Wait for Complete Device Initialization.

[ 3.799023] systemd[1]: Starting Wait for storage scan...

[ 3.808186] systemd[1]: Started Show Plymouth Boot Screen.

[ 3.808283] systemd[1]: Starting Forward Password Requests to Plymouth Directory Watch.

[ 3.808345] systemd[1]: Started Forward Password Requests to Plymouth Directory Watch.

[ 3.808359] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.

[ 3.822778] systemd[1]: Started File System Check on /dev/disk/by-uuid/26589d70-e181-499d-9791-d1070ebdea95.

[ 3.834776] systemd[1]: Mounting /mnt/sdd1...

[ 3.853676] systemd[1]: Started File System Check on /dev/disk/by-uuid/b9305ead-6f33-4d32-81a3-5fbff086d947.

[ 3.861531] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: acl

[ 3.863744] systemd[1]: Started Wait for storage scan.

[ 3.863947] systemd[1]: Mounted /mnt/sdd1.

[ 3.864028] systemd[1]: Started Initialize storage subsystems (RAID, LVM, etc.).

[ 3.864057] systemd[1]: Started Initialize storage subsystems (

y'a quelqu'un?

Salut

Peut-être que le mot de passe est erroné, non ?
Verifier caps lock et numlock....

c'est un mot de passe que j'utilise depuis longtemps.....et puis j'ai aucun message d'erreurs concernant mon identification.

juste que , au lieu de me retrouver sur le bureau,je reviens sur kdm



le message d'erreur est similaire a celui ci http://www.manjaro.fr/forum/viewtopic.php?f=17&t=2706



du coup j'ai pensé a un pbm de swap mais bon je n'ai pas /etc/default/grub et mon /boot/grub/menu.lst semble correct. J'y retrouve bien l'UUID que j'ai pour la swap qd je tape la commande "blkid"



ça me saoule,j'aimerai récupérer mon système sans avoir à reinstaller

Salut,

se loguer en console avec cet utilisateur, ça donne quoi ?

salut!

aucun souci pour me logguer en console mais quand je fais un "startx" ça ne marche pas.

voici mon Xorg.log





peut etre que c'est lié à mon pilote graphique NVIDIA? c'est vrai que j'ai souvent à le mettre à jour(quoiqu'avec dkms je crois que c'est automatique?).Enfin,habituellement quand c'est ce genre de problème, je n'arrive meme pas jusque la fenetre de login.....



EDIT ZEBULON : J'ai utilisé la balise [hide] pour le fichier x.org afin d'améliorer la visibilité . merci

Salut,

donc le login fonctionne en console.
Tu as bien une interface graphique autrement puisque tu parles de KDM.

Je ne pense pas à un problème "graphique"

En root, en console, procèdes à une mise à jour :


et redémarres un coup, et teste à nouveau.

Peut être une bogue dans un paquet qui a été résolu rapidement dans le week-end ?

si ,c'etait bien le pilote graphique puisque je viens de le mettre à jour et que ça marche maintenant

je pensais pas que c'etait ça!

merci pour votre aide