Besoin d'aide pour Samba (ai déjà partenaire ;o) )
Je n'en sors pas
Système et matériels / Réseau Internet Wi-Fi
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
J'ai beau essayer, suivre ici ou /et là, ça ne va jamais.
J'aimerais donc un coup de main pour m'éclairer.
J'ai : 1PC en ethernet MGA3 64b - 1Portable en wifi MGA3 64b - 1 NeufBox : Réseau WAN en routeur
J'ai chargé Samba, validé ce qui était demandé. J'ai désactivé le parefeu vu que ça ne marchait jamais ( et même ma souris 'logitech' y serait bloquée ! ).
Suivant les questions posées, j'obtiens ceci:
service smb status :
Caché :
service smb status
smb.service - LSB: Samba servers (nmbd and smbd)
Loaded: loaded (/etc/rc.d/init.d/smb)
Active: active (running) since Mon, 2013-08-19 12:43:23 CEST; 1 day and 7h ago
CGroup: name=systemd:/system/smb.service
â 9645 smbd -D
â 9653 nmbd -D
â 9664 smbd -D
Aug 20 19:24:28 localhost.localdomain smbd[23237]: [2013/08/20 19:24:28.716746, 0] lib/access.c:338(allow_access)
Aug 20 19:24:28 localhost.localdomain smbd[23237]: Denied connection from 192.168.1.21 (192.168.1.21)
Aug 20 19:24:28 localhost.localdomain smbd[23238]: [2013/08/20 19:24:28.752984, 0] lib/access.c:338(allow_access)
Aug 20 19:24:28 localhost.localdomain smbd[23238]: Denied connection from 192.168.1.21 (192.168.1.21)
Aug 20 19:24:28 localhost.localdomain smbd[23239]: [2013/08/20 19:24:28.755404, 0] lib/access.c:338(allow_access)
Aug 20 19:24:28 localhost.localdomain smbd[23239]: Denied connection from 192.168.1.21 (192.168.1.21)
Aug 20 19:24:29 localhost.localdomain smbd[23241]: [2013/08/20 19:24:29.693882, 0] lib/access.c:338(allow_access)
Aug 20 19:24:29 localhost.localdomain smbd[23242]: [2013/08/20 19:24:29.698385, 0] lib/access.c:338(allow_access)
Aug 20 19:24:29 localhost.localdomain smbd[23242]: Denied connection from 192.168.1.21 (192.168.1.21)
Aug 20 19:24:29 localhost.localdomain smbd[23243]: [2013/08/20 19:24:29.702452, 0] lib/access.c:338(allow_access)
smb.service - LSB: Samba servers (nmbd and smbd)
Loaded: loaded (/etc/rc.d/init.d/smb)
Active: active (running) since Mon, 2013-08-19 12:43:23 CEST; 1 day and 7h ago
CGroup: name=systemd:/system/smb.service
â 9645 smbd -D
â 9653 nmbd -D
â 9664 smbd -D
Aug 20 19:24:28 localhost.localdomain smbd[23237]: [2013/08/20 19:24:28.716746, 0] lib/access.c:338(allow_access)
Aug 20 19:24:28 localhost.localdomain smbd[23237]: Denied connection from 192.168.1.21 (192.168.1.21)
Aug 20 19:24:28 localhost.localdomain smbd[23238]: [2013/08/20 19:24:28.752984, 0] lib/access.c:338(allow_access)
Aug 20 19:24:28 localhost.localdomain smbd[23238]: Denied connection from 192.168.1.21 (192.168.1.21)
Aug 20 19:24:28 localhost.localdomain smbd[23239]: [2013/08/20 19:24:28.755404, 0] lib/access.c:338(allow_access)
Aug 20 19:24:28 localhost.localdomain smbd[23239]: Denied connection from 192.168.1.21 (192.168.1.21)
Aug 20 19:24:29 localhost.localdomain smbd[23241]: [2013/08/20 19:24:29.693882, 0] lib/access.c:338(allow_access)
Aug 20 19:24:29 localhost.localdomain smbd[23242]: [2013/08/20 19:24:29.698385, 0] lib/access.c:338(allow_access)
Aug 20 19:24:29 localhost.localdomain smbd[23242]: Denied connection from 192.168.1.21 (192.168.1.21)
Aug 20 19:24:29 localhost.localdomain smbd[23243]: [2013/08/20 19:24:29.702452, 0] lib/access.c:338(allow_access)
smbclient -L localhost :
Caché :
Domain=[MGAGROUP] OS=[Unix] Server=[Samba 3.6.15]
Sharename Type Comment
--------- ---- -------
IPC$ IPC IPC Service (localhost)
photos Disk photos
pdf-gen Printer PDF Generator (only valid users)
print$ Disk
HP-970C_Brouillon Printer HP-970C_Brouillon
dan Disk Home Directories
Domain=[MGAGROUP] OS=[Unix] Server=[Samba 3.6.15]
Server Comment
--------- -------
ANTEC localhost
TOSH1 localhost
Workgroup Master
--------- -------
MGAGROUP TOSH1
Sharename Type Comment
--------- ---- -------
IPC$ IPC IPC Service (localhost)
photos Disk photos
pdf-gen Printer PDF Generator (only valid users)
print$ Disk
HP-970C_Brouillon Printer HP-970C_Brouillon
dan Disk Home Directories
Domain=[MGAGROUP] OS=[Unix] Server=[Samba 3.6.15]
Server Comment
--------- -------
ANTEC localhost
TOSH1 localhost
Workgroup Master
--------- -------
MGAGROUP TOSH1
testparm :
Caché :
testparm
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[homes]"
Processing section "[printers]"
Processing section "[print$]"
Processing section "[pdf-gen]"
Processing section "[photos]"
Loaded services file OK.
Warning: Service printers defines a print command, but rameter is ignored when using CUPS libraries.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[homes]"
Processing section "[printers]"
Processing section "[print$]"
Processing section "[pdf-gen]"
Processing section "[photos]"
Loaded services file OK.
Warning: Service printers defines a print command, but rameter is ignored when using CUPS libraries.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions
et dump de smb.conf :
Caché :
[global]
workgroup = MGAGROUP
netbios name = ANTEC
server string = %h
map to guest = Bad User
log file = /var/log/samba/%m.log
max log size = 50
printcap cache time = 60
printcap name = cups
dns proxy = No
idmap config * : backend = tdb
hosts allow = 192.168.1.1
[homes]
comment = Home Directories
read only = No
browseable = No
[printers]
comment = All Printers
path = /var/spool/samba
create mask = 0700
guest ok = Yes
printable = Yes
print ok = Yes
print command = lpr-cups -P %p -o raw %s -r # using client side printer drivers.
use client driver = Yes
browseable = No
[print$]
path = /var/lib/samba/printers
write list = @adm, root
inherit permissions = Yes
guest ok = Yes
[pdf-gen]
comment = PDF Generator (only valid users)
path = /var/tmp
printable = Yes
print ok = Yes
printing = bsd
print command = /usr/share/samba/scripts/print-pdf "%s" "%H" "//%L/%u" "%m" "%I" "%J" &
lpq command = /bin/true
lprm command = lprm -P'%p' %j
[photos]
comment = photos
path = /home/Photos
read only = No
guest ok = Yes
workgroup = MGAGROUP
netbios name = ANTEC
server string = %h
map to guest = Bad User
log file = /var/log/samba/%m.log
max log size = 50
printcap cache time = 60
printcap name = cups
dns proxy = No
idmap config * : backend = tdb
hosts allow = 192.168.1.1
[homes]
comment = Home Directories
read only = No
browseable = No
[printers]
comment = All Printers
path = /var/spool/samba
create mask = 0700
guest ok = Yes
printable = Yes
print ok = Yes
print command = lpr-cups -P %p -o raw %s -r # using client side printer drivers.
use client driver = Yes
browseable = No
[print$]
path = /var/lib/samba/printers
write list = @adm, root
inherit permissions = Yes
guest ok = Yes
[pdf-gen]
comment = PDF Generator (only valid users)
path = /var/tmp
printable = Yes
print ok = Yes
printing = bsd
print command = /usr/share/samba/scripts/print-pdf "%s" "%H" "//%L/%u" "%m" "%I" "%J" &
lpq command = /bin/true
lprm command = lprm -P'%p' %j
[photos]
comment = photos
path = /home/Photos
read only = No
guest ok = Yes
Voilà où j'en suis.
Quelqu'un peut-il m'aider ?
Cordialement, Dantou.
vouf Membre non connecté
-
- Voir le profil du membre vouf
- Inscrit le : 16/08/2008
- Groupes :
Tu as regardé ce fil de discussion ? : http://www.mageialinux-online.org/forum/topic-16210+serveur-samba-pas-de-reponse-du-serveur.php
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
J'ai intégré le fil indiqué et ai repris mot pour mot les indications.
J'ai recréé les utilisateurs samba, pour être sur.
j'obtiens donc ceci :
testparm :
Caché :
testparm
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[homes]"
Processing section "[printers]"
Processing section "[print$]"
Processing section "[pdf-gen]"
Processing section "[photos]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[homes]"
Processing section "[printers]"
Processing section "[print$]"
Processing section "[pdf-gen]"
Processing section "[photos]"
Loaded services file OK.
Server role: ROLE_STANDALONE
dump de smb.conf :
Caché :
[global]
workgroup = MGAGROUP
netbios name = ANTEC
server string = %h
log file = /var/log/samba/%m.log
printcap cache time = 60
printcap name = cups
os level = 255
dns proxy = No
idmap config * : backend = tdb
[homes]
comment = Home Directories
read only = No
[printers]
path = /var/spool/samba
create mask = 0700
guest ok = Yes
printable = Yes
print ok = Yes
use client driver = Yes
browseable = No
[print$]
path = /var/lib/samba/printers
write list = @adm, root
inherit permissions = Yes
guest ok = Yes
[pdf-gen]
comment = PDF Generator (only valid users)
path = /var/tmp
printable = Yes
print ok = Yes
printing = bsd
print command = /usr/share/samba/scripts/print-pdf "%s" "%H" "//%L/%u" "%m" "%I" "%J" &
lpq command = /bin/true
lprm command = lprm -P'%p' %j
[photos]
comment = photos
path = /home/Photos
read only = No
guest ok = Yes
workgroup = MGAGROUP
netbios name = ANTEC
server string = %h
log file = /var/log/samba/%m.log
printcap cache time = 60
printcap name = cups
os level = 255
dns proxy = No
idmap config * : backend = tdb
[homes]
comment = Home Directories
read only = No
[printers]
path = /var/spool/samba
create mask = 0700
guest ok = Yes
printable = Yes
print ok = Yes
use client driver = Yes
browseable = No
[print$]
path = /var/lib/samba/printers
write list = @adm, root
inherit permissions = Yes
guest ok = Yes
[pdf-gen]
comment = PDF Generator (only valid users)
path = /var/tmp
printable = Yes
print ok = Yes
printing = bsd
print command = /usr/share/samba/scripts/print-pdf "%s" "%H" "//%L/%u" "%m" "%I" "%J" &
lpq command = /bin/true
lprm command = lprm -P'%p' %j
[photos]
comment = photos
path = /home/Photos
read only = No
guest ok = Yes
smbclient -L localhost :
Caché :
[root@localhost dan]# smbclient -L localhost
Enter dan's password:
Domain=[MGAGROUP] OS=[Unix] Server=[Samba 3.6.15]
Sharename Type Comment
--------- ---- -------
IPC$ IPC IPC Service (localhost)
photos Disk photos
pdf-gen Printer PDF Generator (only valid users)
print$ Disk
homes Disk Home Directories
HP-970C_Brouillon Printer HP-970C_Brouillon
dan Disk Home Directories
Domain=[MGAGROUP] OS=[Unix] Server=[Samba 3.6.15]
Server Comment
--------- -------
ANTEC localhost
TOSH1 localhost
Workgroup Master
--------- -------
MGAGROUP TOSH1
Enter dan's password:
Domain=[MGAGROUP] OS=[Unix] Server=[Samba 3.6.15]
Sharename Type Comment
--------- ---- -------
IPC$ IPC IPC Service (localhost)
photos Disk photos
pdf-gen Printer PDF Generator (only valid users)
print$ Disk
homes Disk Home Directories
HP-970C_Brouillon Printer HP-970C_Brouillon
dan Disk Home Directories
Domain=[MGAGROUP] OS=[Unix] Server=[Samba 3.6.15]
Server Comment
--------- -------
ANTEC localhost
TOSH1 localhost
Workgroup Master
--------- -------
MGAGROUP TOSH1
service smb status :
Caché :
[root@localhost dan]# service smb status
smb.service - LSB: Samba servers (nmbd and smbd)
Loaded: loaded (/etc/rc.d/init.d/smb)
Active: active (running) since Wed, 2013-08-21 10:39:56 CEST; 38min ago
Process: 1987 ExecStart=/etc/rc.d/init.d/smb start (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/smb.service
â 2014 smbd -D
â 2583 smbd -D
â 2584 nmbd -D
Aug 21 10:39:54 localhost.localdomain systemd[1]: Starting LSB: Samba servers (nmbd and smbd)...
Aug 21 10:39:54 localhost.localdomain smb[1987]: Lancement du service SaMBa : [ OK ]
Aug 21 10:39:56 localhost.localdomain systemd[1]: Started LSB: Samba servers (nmbd and smbd).
Aug 21 10:39:56 localhost.localdomain smb[1987]: Lancement du service NMBÂ : [ OK ]
smb.service - LSB: Samba servers (nmbd and smbd)
Loaded: loaded (/etc/rc.d/init.d/smb)
Active: active (running) since Wed, 2013-08-21 10:39:56 CEST; 38min ago
Process: 1987 ExecStart=/etc/rc.d/init.d/smb start (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/smb.service
â 2014 smbd -D
â 2583 smbd -D
â 2584 nmbd -D
Aug 21 10:39:54 localhost.localdomain systemd[1]: Starting LSB: Samba servers (nmbd and smbd)...
Aug 21 10:39:54 localhost.localdomain smb[1987]: Lancement du service SaMBa : [ OK ]
Aug 21 10:39:56 localhost.localdomain systemd[1]: Started LSB: Samba servers (nmbd and smbd).
Aug 21 10:39:56 localhost.localdomain smb[1987]: Lancement du service NMBÂ : [ OK ]
smb.service - LSB: Samba servers (nmbd and smbd)
Loaded: loaded (/etc/rc.d/init.d/smb)
Active: active (running) since Wed, 2013-08-21 10:39:56 CEST; 38min ago
Process: 1987 ExecStart=/etc/rc.d/init.d/smb start (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/smb.service
â 2014 smbd -D
â 2583 smbd -D
â 2584 nmbd -D
Aug 21 10:39:54 localhost.localdomain systemd[1]: Starting LSB: Samba servers (nmbd and smbd)...
Aug 21 10:39:54 localhost.localdomain smb[1987]: Lancement du service SaMBa : [ OK ]
Aug 21 10:39:56 localhost.localdomain systemd[1]: Started LSB: Samba servers (nmbd and smbd).
Aug 21 10:39:56 localhost.localdomain smb[1987]: Lancement du service NMBÂ : [ OK ]
smb.service - LSB: Samba servers (nmbd and smbd)
Loaded: loaded (/etc/rc.d/init.d/smb)
Active: active (running) since Wed, 2013-08-21 10:39:56 CEST; 38min ago
Process: 1987 ExecStart=/etc/rc.d/init.d/smb start (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/smb.service
â 2014 smbd -D
â 2583 smbd -D
â 2584 nmbd -D
Aug 21 10:39:54 localhost.localdomain systemd[1]: Starting LSB: Samba servers (nmbd and smbd)...
Aug 21 10:39:54 localhost.localdomain smb[1987]: Lancement du service SaMBa : [ OK ]
Aug 21 10:39:56 localhost.localdomain systemd[1]: Started LSB: Samba servers (nmbd and smbd).
Aug 21 10:39:56 localhost.localdomain smb[1987]: Lancement du service NMBÂ : [ OK ]
Depuis que je tente d'y arriver, j'ai un certain nombre de "réseaux" qui s'affichent dans Dolphin. J'ai ainsi 5 services réseau qui sont :
A) Nous
B) Services Réseaux
C) owncloud
D) Réseau
E) Partages Samba
avec
A) Réseau : "Nous"
pointe sur "smb :192.168.1.1" affiche : " Pas de réponse du serveur 192.168.1.1 "
B) Réseau : "Service réseaux"
pointe sur : "zeroconf:/" indique : " Disque distant (fish) " avec
1) linux [ zeroconf:/_ssh._tcp/linux/] --> vide et
2) linux-2 [zeroconf:/_ssh._tcp/linux-2/] --> vide également
C) Réseau : "owncloud"
pointe sur : "webdav://dan@localhost:80/owncloud/files/" affiche : "Impossible de se connecter à l'hôte localhost: Connexion refusée."
D) Réseau : "Réseau"
pointe sur : " network:/ " et affiche comme "Services Réseaux", "linux" et "linux-2".
* "linux" (icone écran distant) pointe sur : "network:/linux.local/" et comprend :
1) (icone répertoire) "TOSH1" SMB server taille 0 [c'est mon PC ss wifi] pointe sur smb : linux.local, renvoie : "Impossible de se connecter à l'hôte « smb://linux.local:445/ »",
2) (icone mappemonde) "linux [4c:ed:de:5a:b4:b7]" Worgroup Manager ", pointe sur : "network:/linux.local/linux [4c:ed:de:5a:b4:b7].workstation" --> n'aboutit à rien
3) (icone disque dur) "linux" pointe sur network:/linux.local/linux.udisks-ssh --> n'aboutit à rien
4) (icone fichier) "linux" SSH Server qui ouvre une Konsole
5) (icone imprimante) "HP-970C_Brouillon @ localhost.localdomain.ipp" Internet printing, pointe vers network:/linux.local/HP-970C_Brouillon @ localhost.localdomain.ipp --> n'aboutit à rien
- "linux-2" (icone écran distant) pointe sur : "network:/linux-2.local/" et comprend les mêmes indications mais avec "ANTEC" SMB server taille 0 ( c'est mon PC "serveur") pointe sur smb : linux.local, renvoie : "Impossible de se connecter à l'hôte « smb://linux.local:445/ »"
E) Réseau : "Partages Samba"
pointe sur "smb:/" et affiche "Aucun groupe de travail n'a été trouvé dans votre réseau local. Ceci peut être dû à la présence d'un pare-feu activé." alors que le pare-feu est totalement désactivé !
Par ailleurs, le PC en Wifi, configuré de même renvoie dans service smb status l'impossibilité de se connecter à l'imprimante.
Dans Dolphin, sous "Partages Samba" j'ai : "TOSH1" qui se reconnaît et accède à ses propres dossiers, et "ANTEC", qui lui par contre n'aboutit pas avec "pas de réponse du serveur ANTEC".
Voilà.
Que fais-je ?
vouf Membre non connecté
-
- Voir le profil du membre vouf
- Inscrit le : 16/08/2008
- Groupes :
Je suppose que c'est ton PC Antec qui héberge le serveur samba ? Quel est sont adresse IP
Peux tu nous préciser l'adresse IP de ton portable ? Fait il serveur samba ?
Attention 192.168.1.1 c'est l'adresse de ta neufbox, c'est donc normal que smb ne donne rien !! D'ailleurs, dans ton premier smb.conf, tu avais écris "Hosts Allow = 192.168.1.1", ce qui signifie que seul ton routeur pouvait communiquer avec ton serveur samba. Ca n'a pas beaucoup d'intérêt.
[photos]
comment = photos
path = /home/Photos
read only = No
guest ok = Yes
A remplacer par
[photos]
path = /home/Photos
comment = photos
browseable = yes
public = yes
writable = yes
Remplace "workgroup=MGAGROUP" par "workgroup=WORKGROUP"
Redémarre samba, et commence par valider le que le service samba du PC antec est bien visible du pc antec et du portable avant d'attaquer la config samba du portable
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
Merci pour vos conseils. J'ai apporté les modifs conseillées, et voici les résultats.
testparm :
Caché :
vi /etc/samba/smb.conf
[root@localhost dan]# testparm
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[homes]"
Processing section "[printers]"
Processing section "[print$]"
Processing section "[pdf-gen]"
Processing section "[photos]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions
[global]
netbios name = ANTEC
server string = %h
log file = /var/log/samba/%m.log
printcap cache time = 60
printcap name = cups
os level = 255
dns proxy = No
idmap config * : backend = tdb
[homes]
comment = Home Directories
read only = No
[printers]
path = /var/spool/samba
create mask = 0700
guest ok = Yes
printable = Yes
print ok = Yes
use client driver = Yes
browseable = No
[print$]
path = /var/lib/samba/printers
write list = @adm, root
inherit permissions = Yes
guest ok = Yes
[pdf-gen]
comment = PDF Generator (only valid users)
path = /var/tmp
printable = Yes
print ok = Yes
printing = bsd
print command = /usr/share/samba/scripts/print-pdf "%s" "%H" "//%L/%u" "%m" "%I" "%J" &
lpq command = /bin/true
lprm command = lprm -P'%p' %j
[photos]
comment = photos
path = /home/Photos
read only = No
guest ok = Yes
[root@localhost dan]# testparm
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[homes]"
Processing section "[printers]"
Processing section "[print$]"
Processing section "[pdf-gen]"
Processing section "[photos]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions
[global]
netbios name = ANTEC
server string = %h
log file = /var/log/samba/%m.log
printcap cache time = 60
printcap name = cups
os level = 255
dns proxy = No
idmap config * : backend = tdb
[homes]
comment = Home Directories
read only = No
[printers]
path = /var/spool/samba
create mask = 0700
guest ok = Yes
printable = Yes
print ok = Yes
use client driver = Yes
browseable = No
[print$]
path = /var/lib/samba/printers
write list = @adm, root
inherit permissions = Yes
guest ok = Yes
[pdf-gen]
comment = PDF Generator (only valid users)
path = /var/tmp
printable = Yes
print ok = Yes
printing = bsd
print command = /usr/share/samba/scripts/print-pdf "%s" "%H" "//%L/%u" "%m" "%I" "%J" &
lpq command = /bin/true
lprm command = lprm -P'%p' %j
[photos]
comment = photos
path = /home/Photos
read only = No
guest ok = Yes
service smb status :
Caché :
service smb status
smb.service - LSB: Samba servers (nmbd and smbd)
Loaded: loaded (/etc/rc.d/init.d/smb)
Active: active (running) since Thu, 2013-08-22 08:52:06 CEST; 2h 59min ago
Process: 2074 ExecStart=/etc/rc.d/init.d/smb start (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/smb.service
â 2139 smbd -D
â 2203 smbd -D
â 2220 nmbd -D
Aug 22 08:52:06 localhost.localdomain systemd[1]: Starting LSB: Samba servers (nmbd and smbd)...
Aug 22 08:52:06 localhost.localdomain smb[2074]: Lancement du service SaMBa : [ OK ]
Aug 22 08:52:06 localhost.localdomain smb[2074]: Lancement du service NMBÂ : [ OK ]
Aug 22 08:52:06 localhost.localdomain systemd[1]: Started LSB: Samba servers (nmbd and smbd).
smb.service - LSB: Samba servers (nmbd and smbd)
Loaded: loaded (/etc/rc.d/init.d/smb)
Active: active (running) since Thu, 2013-08-22 08:52:06 CEST; 2h 59min ago
Process: 2074 ExecStart=/etc/rc.d/init.d/smb start (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/smb.service
â 2139 smbd -D
â 2203 smbd -D
â 2220 nmbd -D
Aug 22 08:52:06 localhost.localdomain systemd[1]: Starting LSB: Samba servers (nmbd and smbd)...
Aug 22 08:52:06 localhost.localdomain smb[2074]: Lancement du service SaMBa : [ OK ]
Aug 22 08:52:06 localhost.localdomain smb[2074]: Lancement du service NMBÂ : [ OK ]
Aug 22 08:52:06 localhost.localdomain systemd[1]: Started LSB: Samba servers (nmbd and smbd).
smb.service - LSB: Samba servers (nmbd and smbd)
Loaded: loaded (/etc/rc.d/init.d/smb)
Active: active (running) since Thu, 2013-08-22 08:52:06 CEST; 2h 59min ago
Process: 2074 ExecStart=/etc/rc.d/init.d/smb start (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/smb.service
â 2139 smbd -D
â 2203 smbd -D
â 2220 nmbd -D
Aug 22 08:52:06 localhost.localdomain systemd[1]: Starting LSB: Samba servers (nmbd and smbd)...
Aug 22 08:52:06 localhost.localdomain smb[2074]: Lancement du service SaMBa : [ OK ]
Aug 22 08:52:06 localhost.localdomain smb[2074]: Lancement du service NMBÂ : [ OK ]
Aug 22 08:52:06 localhost.localdomain systemd[1]: Started LSB: Samba servers (nmbd and smbd).
smb.service - LSB: Samba servers (nmbd and smbd)
Loaded: loaded (/etc/rc.d/init.d/smb)
Active: active (running) since Thu, 2013-08-22 08:52:06 CEST; 2h 59min ago
Process: 2074 ExecStart=/etc/rc.d/init.d/smb start (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/smb.service
â 2139 smbd -D
â 2203 smbd -D
â 2220 nmbd -D
Aug 22 08:52:06 localhost.localdomain systemd[1]: Starting LSB: Samba servers (nmbd and smbd)...
Aug 22 08:52:06 localhost.localdomain smb[2074]: Lancement du service SaMBa : [ OK ]
Aug 22 08:52:06 localhost.localdomain smb[2074]: Lancement du service NMBÂ : [ OK ]
Aug 22 08:52:06 localhost.localdomain systemd[1]: Started LSB: Samba servers (nmbd and smbd).
smbclient -L localhost :
Caché :
smbclient -L localhost
Enter dan's password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.6.15]
Sharename Type Comment
--------- ---- -------
IPC$ IPC IPC Service (localhost)
photos Disk photos
pdf-gen Printer PDF Generator (only valid users)
print$ Disk
homes Disk Home Directories
HP-970C_Brouillon Printer HP-970C_Brouillon
dan Disk Home Directories
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.6.15]
Server Comment
--------- -------
Workgroup Master
--------- -------
MGAGROUP ANTEC
Enter dan's password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.6.15]
Sharename Type Comment
--------- ---- -------
IPC$ IPC IPC Service (localhost)
photos Disk photos
pdf-gen Printer PDF Generator (only valid users)
print$ Disk
homes Disk Home Directories
HP-970C_Brouillon Printer HP-970C_Brouillon
dan Disk Home Directories
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.6.15]
Server Comment
--------- -------
Workgroup Master
--------- -------
MGAGROUP ANTEC
On constate que WORGROUP n'est pas repris en workgroup, et qu'il conserve "MGAGROUP" !
D'où cela vient-il puisque cette ligne est bien modifiée. Par ailleurs, par le MCC je suis allé reconfiguré Samba en rentrant WORKGROUP et quand je revérifie, j'ai toujours ce MGAGROUP qui traîne.
Une autre me turlupine.
En créant les utilisateurs, il a fallu leur donner un mot de passe.
A quel moment le service va-t-il le réclamer, car quand je clique dans Dolphin sur "Réseaux", il ne demande rien.
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
J'ai arrêté le service smb et l'ai relancé "a mano" et WRKGROUP est désormais bien repris.
Désormais, je lance "Partages Samba" et aboutis à "WORKGROUP", mais : "Pas de réponse du serveur workgroup"
Édité par dantou Le 22/08/2013 à 12h50
XKomodor Membre non connecté
-
- Voir le profil du membre XKomodor
- Inscrit le : 08/01/2008
- Site internet
- Groupes :
-
Administrateur
Il faut donner un mot de passe ... c'est normal, Windows XP ne supporte pas les utilisateurs avec un mot de passe vide par exemple.
SAMBA étant rétrocompatible avec les anciennes versions de l'OS de Redmond, il faut donc ajouter les comptes utilisateurs de ta Mageia puis ajouter les comptes SAMBA.
Tous les utilisateurs Mageia n'auront pas fatalement accès à des ressources sur un réseau Microsoft.
Pour le groupe de travail, il faut que l'ensemble de tes machines soient dans le même groupe sinon cela devient l'anarchie et il faut redémarrer les machines sous Windows et relancer le service SAMBA.
L'explorateur de service réseau peut-être un peu lent, il ne faut pas hésiter à faire plusieurs des requêtes de découverte de partage dans la Mageia et dans les Windows.
Il serait aussi plus simple que tu définisses des partages moins génériques comme je le vois dans ton fichier de configuration :
Citation :
[photos]
comment = photos
path = /home/Photos
read only = No
guest ok = Yes
comment = photos
path = /home/Photos
read only = No
guest ok = Yes
Voici un exemple que j'ai chez moi :
Citation :
[Julien]
comment = partage home
path = /home/julien
valid users = julien
writable = yes
create mask = 0770
directory mask = 0770
comment = partage home
path = /home/julien
valid users = julien
writable = yes
create mask = 0770
directory mask = 0770
et un répertoire commun avec plusieurs utilisateurs :
Citation :
[Backup1]
comment = partage Backup1
path = /mnt/backup1
valid users = julien,myrialuna,alix
writable = yes
create mask = 0770
directory mask = 0770
comment = partage Backup1
path = /mnt/backup1
valid users = julien,myrialuna,alix
writable = yes
create mask = 0770
directory mask = 0770
Merci
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
J'ai un message de la Konsole :
"Broadcast message from root@localhost.localdomain (Thu, 2013-08-22 12:47:54 CEST):
Password entry required for 'Password for %@//antec/photos:' (PID 15536).
Please enter password with the systemd-tty-ask-password-agent tool!"
Qu'est-ce que : systemd-tty-ask-password-agent tool ?
XKomodor Membre non connecté
-
- Voir le profil du membre XKomodor
- Inscrit le : 08/01/2008
- Site internet
- Groupes :
-
Administrateur
Oups mais je n'avais pas vu cela !!
Citation :
[root@localhost dan]# testparm
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Il faut corriger cela avec je pense cela :
http://ubuntuforums.org/showthread.php?t=1428351
Merci
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
Mais testparm est désormais ainsi :
Caché :
testparm
Load smb config files from /etc/samba/smb.conf
Processing section "[printers]"
Processing section "[print$]"
Processing section "[pdf-gen]"
Processing section "[homes]"
Processing section "[Part_photos]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions
[global]
netbios name = ANTEC
server string = %h
log file = /var/log/samba/%m.log
printcap cache time = 60
printcap name = cups
os level = 255
dns proxy = No
idmap config * : backend = tdb
[printers]
path = /var/spool/samba
create mask = 0700
guest ok = Yes
printable = Yes
print ok = Yes
use client driver = Yes
browseable = No
[print$]
path = /var/lib/samba/printers
write list = @adm, root
inherit permissions = Yes
guest ok = Yes
[pdf-gen]
comment = PDF Generator (only valid users)
path = /var/tmp
printable = Yes
print ok = Yes
printing = bsd
print command = /usr/share/samba/scripts/print-pdf "%s" "%H" "//%L/%u" "%m" "%I" "%J" &
lpq command = /bin/true
lprm command = lprm -P'%p' %j
[homes]
comment = Home Directories
admin users = dan
write list = dan, bibi
read only = No
inherit permissions = Yes
guest ok = Yes
[Part_photos]
comment = partage des photos
path = /home/photos
valid users = dan, bibi
read only = No
create mask = 0770
directory mask = 0770
Load smb config files from /etc/samba/smb.conf
Processing section "[printers]"
Processing section "[print$]"
Processing section "[pdf-gen]"
Processing section "[homes]"
Processing section "[Part_photos]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions
[global]
netbios name = ANTEC
server string = %h
log file = /var/log/samba/%m.log
printcap cache time = 60
printcap name = cups
os level = 255
dns proxy = No
idmap config * : backend = tdb
[printers]
path = /var/spool/samba
create mask = 0700
guest ok = Yes
printable = Yes
print ok = Yes
use client driver = Yes
browseable = No
[print$]
path = /var/lib/samba/printers
write list = @adm, root
inherit permissions = Yes
guest ok = Yes
[pdf-gen]
comment = PDF Generator (only valid users)
path = /var/tmp
printable = Yes
print ok = Yes
printing = bsd
print command = /usr/share/samba/scripts/print-pdf "%s" "%H" "//%L/%u" "%m" "%I" "%J" &
lpq command = /bin/true
lprm command = lprm -P'%p' %j
[homes]
comment = Home Directories
admin users = dan
write list = dan, bibi
read only = No
inherit permissions = Yes
guest ok = Yes
[Part_photos]
comment = partage des photos
path = /home/photos
valid users = dan, bibi
read only = No
create mask = 0770
directory mask = 0770
Quoi d'autre ?
XKomodor Membre non connecté
-
- Voir le profil du membre XKomodor
- Inscrit le : 08/01/2008
- Site internet
- Groupes :
-
Administrateur
Voici le mien ... j'ai retiré tout les commentaires et fonctions qui ne sont pas activées :
Code BASH :
workgroup = LINUXIGNITION server string = Samba Server security = user printcap name = /dev/null load printers = no printing = bsd log file = /var/log/samba/log.%m max log size = 50 local master = yes os level = 255 domain master = yes preferred master = yes dns proxy = no
Juste la partie paramètre ... C'est mon petit serveur @home qui tourne sous Calculate, qui a comme client du Windows7 / XP et Calculate LXDE / XFCE
Merci
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
Toujours pas de contact avec le serveur.
N'hésitez pas à me proposer des "ouvertures". Merci.
Cordialement, dan.
Adrien.D Membre non connecté
-
- Voir le profil du membre Adrien.D
- Inscrit le : 30/05/2011
- Site internet
- Groupes :
que renvoie
Code BASH :
ls -l /home | grep photo
?
Merci
Config : PC Fixe : X470 GAMING PRO- AMD Ryzen 5 2600X - 16Go RAM - Radeon RX 560 (Pilote libre) - Gentoo Linux - GNOME Desktop - Kernel 5.10 LTS
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
dantou Membre non connecté
-
- Voir le profil du membre dantou
- Inscrit le : 04/01/2011
- Groupes :
j'ai donc :
testparm
Caché :
testparm
Load smb config files from /etc/samba/smb.conf
Processing section "[printers]"
Processing section "[print$]"
Processing section "[pdf-gen]"
Processing section "[homes]"
Processing section "[Part_photos]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions
[global]
netbios name = ANTEC
server string = %h
log file = /var/log/samba/%m.log
max log size = 50
printcap cache time = 60
printcap name = cups
os level = 255
dns proxy = No
idmap config * : backend = tdb
[printers]
comment = All Printers
path = /var/spool/samba
create mask = 0700
guest ok = Yes
printable = Yes
print ok = Yes
use client driver = Yes
browseable = No
[print$]
path = /var/lib/samba/printers
write list = @adm, root
inherit permissions = Yes
guest ok = Yes
[pdf-gen]
comment = PDF Generator (only valid users)
path = /var/tmp
printable = Yes
print ok = Yes
printing = bsd
print command = /usr/share/samba/scripts/print-pdf "%s" "%H" "//%L/%u" "%m" "%I" "%J" &
lpq command = /bin/true
lprm command = lprm -P'%p' %j
[homes]
comment = Home Directories
admin users = dan
write list = dan, bibi
read only = No
inherit permissions = Yes
guest ok = Yes
[Part_photos]
comment = partage des photos
path = /home/Photos
valid users = dan, bibi
admin users = dan
read only = No
create mask = 0770
directory mask = 0770
guest ok = Yes
Load smb config files from /etc/samba/smb.conf
Processing section "[printers]"
Processing section "[print$]"
Processing section "[pdf-gen]"
Processing section "[homes]"
Processing section "[Part_photos]"
Loaded services file OK.
Server role: ROLE_STANDALONE
Press enter to see a dump of your service definitions
[global]
netbios name = ANTEC
server string = %h
log file = /var/log/samba/%m.log
max log size = 50
printcap cache time = 60
printcap name = cups
os level = 255
dns proxy = No
idmap config * : backend = tdb
[printers]
comment = All Printers
path = /var/spool/samba
create mask = 0700
guest ok = Yes
printable = Yes
print ok = Yes
use client driver = Yes
browseable = No
[print$]
path = /var/lib/samba/printers
write list = @adm, root
inherit permissions = Yes
guest ok = Yes
[pdf-gen]
comment = PDF Generator (only valid users)
path = /var/tmp
printable = Yes
print ok = Yes
printing = bsd
print command = /usr/share/samba/scripts/print-pdf "%s" "%H" "//%L/%u" "%m" "%I" "%J" &
lpq command = /bin/true
lprm command = lprm -P'%p' %j
[homes]
comment = Home Directories
admin users = dan
write list = dan, bibi
read only = No
inherit permissions = Yes
guest ok = Yes
[Part_photos]
comment = partage des photos
path = /home/Photos
valid users = dan, bibi
admin users = dan
read only = No
create mask = 0770
directory mask = 0770
guest ok = Yes
smbclient -L localhost
Caché :
smbclient -L localhost
# smbclient -L localhost
Enter dan's password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.6.15]
Sharename Type Comment
--------- ---- -------
print$ Disk
pdf-gen Printer PDF Generator (only valid users)
homes Disk Home Directories
Part_photos Disk partage des photos
IPC$ IPC IPC Service (localhost)
HP-970C_Brouillon Printer HP-970C_Brouillon
dan Disk Home Directories
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.6.15]
Server Comment
--------- -------
ANTEC localhost
Workgroup Master
--------- -------
WORKGROUP ANTEC
# smbclient -L localhost
Enter dan's password:
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.6.15]
Sharename Type Comment
--------- ---- -------
print$ Disk
pdf-gen Printer PDF Generator (only valid users)
homes Disk Home Directories
Part_photos Disk partage des photos
IPC$ IPC IPC Service (localhost)
HP-970C_Brouillon Printer HP-970C_Brouillon
dan Disk Home Directories
Domain=[WORKGROUP] OS=[Unix] Server=[Samba 3.6.15]
Server Comment
--------- -------
ANTEC localhost
Workgroup Master
--------- -------
WORKGROUP ANTEC
service smb status
Caché :
service smb status
smb.service - LSB: Samba servers (nmbd and smbd)
Loaded: loaded (/etc/rc.d/init.d/smb)
Active: active (running) since Thu, 2013-08-22 17:00:49 CEST; 6h ago
Process: 8835 ExecStop=/etc/rc.d/init.d/smb stop (code=exited, status=0/SUCCESS)
Process: 8861 ExecStart=/etc/rc.d/init.d/smb start (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/smb.service
â 8868 smbd -D
â 8872 smbd -D
â 8878 nmbd -D
Aug 22 17:00:49 localhost.localdomain systemd[1]: Starting LSB: Samba servers (nmbd and smbd)...
Aug 22 17:00:49 localhost.localdomain smb[8861]: Lancement du service SaMBa : [ OK ]
Aug 22 17:00:49 localhost.localdomain smb[8861]: Lancement du service NMBÂ : [ OK ]
Aug 22 17:00:49 localhost.localdomain systemd[1]: Started LSB: Samba servers (nmbd and smbd).
smb.service - LSB: Samba servers (nmbd and smbd)
Loaded: loaded (/etc/rc.d/init.d/smb)
Active: active (running) since Thu, 2013-08-22 17:00:49 CEST; 6h ago
Process: 8835 ExecStop=/etc/rc.d/init.d/smb stop (code=exited, status=0/SUCCESS)
Process: 8861 ExecStart=/etc/rc.d/init.d/smb start (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/smb.service
â 8868 smbd -D
â 8872 smbd -D
â 8878 nmbd -D
Aug 22 17:00:49 localhost.localdomain systemd[1]: Starting LSB: Samba servers (nmbd and smbd)...
Aug 22 17:00:49 localhost.localdomain smb[8861]: Lancement du service SaMBa : [ OK ]
Aug 22 17:00:49 localhost.localdomain smb[8861]: Lancement du service NMBÂ : [ OK ]
Aug 22 17:00:49 localhost.localdomain systemd[1]: Started LSB: Samba servers (nmbd and smbd).
[root@localhost dan]#
smb.service - LSB: Samba servers (nmbd and smbd)
Loaded: loaded (/etc/rc.d/init.d/smb)
Active: active (running) since Thu, 2013-08-22 17:00:49 CEST; 6h ago
Process: 8835 ExecStop=/etc/rc.d/init.d/smb stop (code=exited, status=0/SUCCESS)
Process: 8861 ExecStart=/etc/rc.d/init.d/smb start (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/smb.service
â 8868 smbd -D
â 8872 smbd -D
â 8878 nmbd -D
Aug 22 17:00:49 localhost.localdomain systemd[1]: Starting LSB: Samba servers (nmbd and smbd)...
Aug 22 17:00:49 localhost.localdomain smb[8861]: Lancement du service SaMBa : [ OK ]
Aug 22 17:00:49 localhost.localdomain smb[8861]: Lancement du service NMBÂ : [ OK ]
Aug 22 17:00:49 localhost.localdomain systemd[1]: Started LSB: Samba servers (nmbd and smbd).
smb.service - LSB: Samba servers (nmbd and smbd)
Loaded: loaded (/etc/rc.d/init.d/smb)
Active: active (running) since Thu, 2013-08-22 17:00:49 CEST; 6h ago
Process: 8835 ExecStop=/etc/rc.d/init.d/smb stop (code=exited, status=0/SUCCESS)
Process: 8861 ExecStart=/etc/rc.d/init.d/smb start (code=exited, status=0/SUCCESS)
CGroup: name=systemd:/system/smb.service
â 8868 smbd -D
â 8872 smbd -D
â 8878 nmbd -D
Aug 22 17:00:49 localhost.localdomain systemd[1]: Starting LSB: Samba servers (nmbd and smbd)...
Aug 22 17:00:49 localhost.localdomain smb[8861]: Lancement du service SaMBa : [ OK ]
Aug 22 17:00:49 localhost.localdomain smb[8861]: Lancement du service NMBÂ : [ OK ]
Aug 22 17:00:49 localhost.localdomain systemd[1]: Started LSB: Samba servers (nmbd and smbd).
[root@localhost dan]#
ls -l /home | grep Photos donne
drwxrwxrwx 11 bibi bibi 4096 août 21 13:43 Photos/
C'est le répertoire auquel je souhaite donner accès.
Devrais-je avoir Part_Photos, qui donne accès à /home/Photos ? (je doutais de mes MAJ, de ce fait j'ai renommé certains paramètres dans "smb.conf", comme repris dans les copies ci-dessus).
Par ailleurs, lorsque je clique dans Dolphin sur Réseau, Partages Samba, j'obtiens : "Impossible de se connecter à l'hôte « smb://workgroup/ »" et non plus :"Pas de réponse du serveur workgroup" ! ???
Édité par dantou Le 23/08/2013 à 00h26
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie