Plantages byzarres
Bosco Membre non connecté
-
- Voir le profil du membre Bosco
- Inscrit le : 27/10/2011
- Site internet
- Groupes :
À ce moment cela ne concernait que LO. Maintenant j'ai des plantages réguliers avec thunderbird, QupZilla et récemment avec okular.
Thunderbird ne s'affiche plus quand je clique sur l'icone et plante jusqu'au redémarrage système.
Okular a planté mais a redémarré correctement sans redémarrage.
Je n'ai jamais eu ce genre de soucis depuis que je suis sur mageia.
Ma mageia 3 a été installée par live DVD et sa configuration est simple : KDE, Opera, Skype, VLC, Dropbox, Wine, QupZilla...
thierryR Membre non connecté
-
- Voir le profil du membre thierryR
- Inscrit le : 02/02/2010
- Site internet
badblocks -s -v -c 10240 /dev/sdx ou x = a, b,c.... (test en lecture)
badblocks -s -v -c -n 10240 /dev/sdx ou x = a, b,c.... (pour faire un test R/W)
débusqueur de bugs et chercheur en améliorations
Amicalement vôtre.
Kernel: 4.4.92-desktop-1.mga5 x86_64 (64 bit) Desktop: KDE 4.14.35 Distro: Mageia 5 thornicroft
Machine: Mobo: ASUSTeK model: X751SA v: 1.0 Bios: American Megatrends v: X751SA.403
CPU: Quad core Intel Pentium N3710 (-MCP-) cache: 1024 KB Graphics: Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
Amicalement vôtre.Kernel: 4.4.92-desktop-1.mga5 x86_64 (64 bit) Desktop: KDE 4.14.35 Distro: Mageia 5 thornicroft
Machine: Mobo: ASUSTeK model: X751SA v: 1.0 Bios: American Megatrends v: X751SA.403
CPU: Quad core Intel Pentium N3710 (-MCP-) cache: 1024 KB Graphics: Card: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Integrated Graphics Controller
Bosco Membre non connecté
-
- Voir le profil du membre Bosco
- Inscrit le : 27/10/2011
- Site internet
- Groupes :
Voilà la réponse en lecture seule :
[root@localhost xxxxxxxxx]# badblocks -s -v -c 10240 /dev/sda
Vérification des blocs 0 à 156290903
Vérification des blocs défectueux (test en mode lecture seule) : 0.00% effectué, 0:00 écoulé. (0/0/0 ecomplété
Passe complétée, 0 blocs défectueux repérés. (0/0/0 erreurs)
La 2ème ne fonctionne pas
Adrien.D Membre non connecté
-
- Voir le profil du membre Adrien.D
- Inscrit le : 30/05/2011
- Site internet
- Groupes :
en Console, tu peux voir s'il y a des soucis.
Installer le paquet qui va bien et lancer l'analyse :
Code BASH :
1 [18:44:58] root@superlinux: /home/adrien # urpmi smartmontools $MIRRORLIST: media/core/release/smartmontools-6.1-1.mga3.x86_64.rpm installation de smartmontools-6.1-1.mga3.x86_64.rpm depuis /var/cache/urpmi/rpms Préparation... ########################################################################## 1/1: smartmontools ########################################################################## 2 [18:45:10] root@superlinux: /home/adrien # smartctl -a /dev/sda smartctl 6.1 2013-03-16 r3800 [x86_64-linux-3.8.13.3-desktop-2.mga3] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Indilinx Barefoot_2/Everest/Martini based SSDs Device Model: OCZ-VERTEX4 Serial Number: OCZ-XXXXXXXXXXXXXXXXXXXX LU WWN Device Id: 5 e83a97 d0e8653b6 Firmware Version: 1.5.1 User Capacity: 256 060 514 304 bytes [256 GB] Sector Size: 512 bytes logical/physical Rotation Rate: Solid State Device Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s) Local Time is: Wed Jul 17 18:45:23 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x1d) SMART execute Offline immediate. No Auto Offline data collection support. Abort Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. No Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x00) Error logging NOT supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 0) minutes. Extended self-test routine recommended polling time: ( 0) minutes. SMART Attributes Data Structure revision number: 18 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x0000 006 000 000 Old_age Offline - 6 3 Spin_Up_Time 0x0000 100 100 000 Old_age Offline - 0 4 Start_Stop_Count 0x0000 100 100 000 Old_age Offline - 0 5 Reallocated_Sector_Ct 0x0000 100 100 000 Old_age Offline - 0 9 Power_On_Hours 0x0000 100 100 000 Old_age Offline - 502 12 Power_Cycle_Count 0x0000 100 100 000 Old_age Offline - 132 232 Lifetime_Writes 0x0000 100 100 000 Old_age Offline - 4468760231 233 Media_Wearout_Indicator 0x0000 100 000 000 Old_age Offline - 100 SMART Error Log not supported Warning! SMART Self-Test Log Structure error: invalid SMART checksum. SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] Selective Self-tests/Logging not supported
Config : PC Fixe : X470 GAMING PRO- AMD Ryzen 5 2600X - 16Go RAM - Radeon RX 560 (Pilote libre) - Gentoo Linux - GNOME Desktop - Kernel 5.10 LTS
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
Bosco Membre non connecté
-
- Voir le profil du membre Bosco
- Inscrit le : 27/10/2011
- Site internet
- Groupes :
Voilà le résultat de l'analyse :
Caché :
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Caviar SE Serial ATA
Device Model: WDC WD1600JS-60NCB1
Serial Number: WD-WMANM5903485
Firmware Version: 10.02E02
User Capacity: 160 041 885 696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Wed Jul 17 22:46:47 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 60) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 245 181 021 Pre-fail Always - 750
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3295
5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 3
7 Seek_Error_Rate 0x000f 100 253 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 057 057 000 Old_age Always - 31455
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3177
190 Airflow_Temperature_Cel 0x0022 044 030 045 Old_age Always FAILING_NOW 56
194 Temperature_Celsius 0x0022 091 077 000 Old_age Always - 56
196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 4
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4 occurred at disk power-on lifetime: 20548 hours (856 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a6 32 05 40 Error: UNC at LBA = 0x000532a6 = 340646
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 60 00 a0 32 05 00 08 00:21:42.166 READ FPDMA QUEUED
60 50 00 28 f9 06 00 08 00:21:42.163 READ FPDMA QUEUED
60 98 00 20 f8 06 00 08 00:21:42.159 READ FPDMA QUEUED
60 38 00 28 ee 06 00 08 00:21:42.154 READ FPDMA QUEUED
60 38 00 58 eb 06 00 08 00:21:42.153 READ FPDMA QUEUED
Error 3 occurred at disk power-on lifetime: 18319 hours (763 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a6 32 05 40 Error: UNC at LBA = 0x000532a6 = 340646
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 00 31 05 00 08 00:01:12.005 READ FPDMA QUEUED
ea 08 04 38 5d 04 09 00 00:01:11.997 FLUSH CACHE EXT
61 08 00 38 5d 04 09 08 00:01:11.997 WRITE FPDMA QUEUED
ea 10 04 28 5d 04 09 00 00:01:11.977 FLUSH CACHE EXT
61 10 00 28 5d 04 09 08 00:01:11.977 WRITE FPDMA QUEUED
Error 2 occurred at disk power-on lifetime: 18308 hours (762 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a6 32 05 40 Error: UNC at LBA = 0x000532a6 = 340646
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 00 31 05 00 08 00:01:08.881 READ FPDMA QUEUED
ec 00 00 00 00 00 00 00 00:01:08.873 IDENTIFY DEVICE
ef 03 45 00 00 00 00 00 00:01:08.873 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 00:01:08.865 IDENTIFY DEVICE
60 00 00 00 31 05 00 08 00:01:06.375 READ FPDMA QUEUED
Error 1 occurred at disk power-on lifetime: 18308 hours (762 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a6 32 05 40 Error: UNC at LBA = 0x000532a6 = 340646
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 00 31 05 00 08 00:01:06.375 READ FPDMA QUEUED
60 00 00 00 30 05 00 08 00:01:06.354 READ FPDMA QUEUED
60 08 00 28 0a 41 08 08 00:01:06.353 READ FPDMA QUEUED
60 b8 00 28 d0 4a 04 08 00:01:06.341 READ FPDMA QUEUED
60 e0 00 e0 d1 4a 04 08 00:01:06.340 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3667 -
# 2 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
Model Family: Western Digital Caviar SE Serial ATA
Device Model: WDC WD1600JS-60NCB1
Serial Number: WD-WMANM5903485
Firmware Version: 10.02E02
User Capacity: 160 041 885 696 bytes [160 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA/ATAPI-7 (minor revision not indicated)
Local Time is: Wed Jul 17 22:46:47 2013 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
See vendor-specific Attribute list for marginal Attributes.
General SMART Values:
Offline data collection status: (0x84) Offline data collection activity
was suspended by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 4980) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 60) minutes.
Conveyance self-test routine
recommended polling time: ( 6) minutes.
SCT capabilities: (0x103f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0003 245 181 021 Pre-fail Always - 750
4 Start_Stop_Count 0x0032 097 097 000 Old_age Always - 3295
5 Reallocated_Sector_Ct 0x0033 199 199 140 Pre-fail Always - 3
7 Seek_Error_Rate 0x000f 100 253 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 057 057 000 Old_age Always - 31455
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0012 100 100 051 Old_age Always - 0
12 Power_Cycle_Count 0x0032 097 097 000 Old_age Always - 3177
190 Airflow_Temperature_Cel 0x0022 044 030 045 Old_age Always FAILING_NOW 56
194 Temperature_Celsius 0x0022 091 077 000 Old_age Always - 56
196 Reallocated_Event_Count 0x0032 199 199 000 Old_age Always - 1
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0010 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 200 051 Pre-fail Offline - 0
SMART Error Log Version: 1
ATA Error Count: 4
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 4 occurred at disk power-on lifetime: 20548 hours (856 days + 4 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a6 32 05 40 Error: UNC at LBA = 0x000532a6 = 340646
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 60 00 a0 32 05 00 08 00:21:42.166 READ FPDMA QUEUED
60 50 00 28 f9 06 00 08 00:21:42.163 READ FPDMA QUEUED
60 98 00 20 f8 06 00 08 00:21:42.159 READ FPDMA QUEUED
60 38 00 28 ee 06 00 08 00:21:42.154 READ FPDMA QUEUED
60 38 00 58 eb 06 00 08 00:21:42.153 READ FPDMA QUEUED
Error 3 occurred at disk power-on lifetime: 18319 hours (763 days + 7 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a6 32 05 40 Error: UNC at LBA = 0x000532a6 = 340646
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 00 31 05 00 08 00:01:12.005 READ FPDMA QUEUED
ea 08 04 38 5d 04 09 00 00:01:11.997 FLUSH CACHE EXT
61 08 00 38 5d 04 09 08 00:01:11.997 WRITE FPDMA QUEUED
ea 10 04 28 5d 04 09 00 00:01:11.977 FLUSH CACHE EXT
61 10 00 28 5d 04 09 08 00:01:11.977 WRITE FPDMA QUEUED
Error 2 occurred at disk power-on lifetime: 18308 hours (762 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a6 32 05 40 Error: UNC at LBA = 0x000532a6 = 340646
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 00 31 05 00 08 00:01:08.881 READ FPDMA QUEUED
ec 00 00 00 00 00 00 00 00:01:08.873 IDENTIFY DEVICE
ef 03 45 00 00 00 00 00 00:01:08.873 SET FEATURES [Set transfer mode]
ec 00 00 00 00 00 00 00 00:01:08.865 IDENTIFY DEVICE
60 00 00 00 31 05 00 08 00:01:06.375 READ FPDMA QUEUED
Error 1 occurred at disk power-on lifetime: 18308 hours (762 days + 20 hours)
When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 a6 32 05 40 Error: UNC at LBA = 0x000532a6 = 340646
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
60 00 00 00 31 05 00 08 00:01:06.375 READ FPDMA QUEUED
60 00 00 00 30 05 00 08 00:01:06.354 READ FPDMA QUEUED
60 08 00 28 0a 41 08 08 00:01:06.353 READ FPDMA QUEUED
60 b8 00 28 d0 4a 04 08 00:01:06.341 READ FPDMA QUEUED
60 e0 00 e0 d1 4a 04 08 00:01:06.340 READ FPDMA QUEUED
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 3667 -
# 2 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
C'est grave docteur ???
Adrien.D Membre non connecté
-
- Voir le profil du membre Adrien.D
- Inscrit le : 30/05/2011
- Site internet
- Groupes :
Ce que je peux tirer de ces informations est qu'il y a 3 secteurs ré-alloués.
Tant que ce nombre est de 0, RAS, mais cela indique peut être qu'il faut penser à le changer.
De Plus, 56°C pour un disque dur, cela semble chaud .... j'ai toujours entendu que la température en doit pas excéder 45°C.
Le circuit d'air est bon dans la tour ?
Mais je ne pense pas que ces petits soucis fassent planter le système ... il faudrait un expert Hardware !
Config : PC Fixe : X470 GAMING PRO- AMD Ryzen 5 2600X - 16Go RAM - Radeon RX 560 (Pilote libre) - Gentoo Linux - GNOME Desktop - Kernel 5.10 LTS
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
lebarhon Membre non connecté
-
- Voir le profil du membre lebarhon
- Inscrit le : 09/10/2010
- Groupes :
-
Équipe Mageia
-
Membre d'Honneur
Attention, la température est donnée par différence avec 100, donc ici le température est de 44°C. Tout va bien.
http://en.wikipedia.org/wiki/S.M.A.R.T
Par contre 31000 heures et des secteurs ré-alloués, c'est déjà beaucoup s'il y a des données précieuses.
http://www.clubic.com/actualite-69935-duree-vie-disques-durs-google.html
angel Membre non connecté
-
- Voir le profil du membre angel
- Inscrit le : 04/06/2013
Bosco :
J'ai déjà signalé un soucis dans ce post : http://www.mageialinux-online.org/forum/topic-15950+plantages-libreoffice.php
À ce moment cela ne concernait que LO. Maintenant j'ai des plantages réguliers avec thunderbird, QupZilla et récemment avec okular.
Thunderbird ne s'affiche plus quand je clique sur l'icone et plante jusqu'au redémarrage système.
Okular a planté mais a redémarré correctement sans redémarrage.
Je n'ai jamais eu ce genre de soucis depuis que je suis sur mageia.
Ma mageia 3 a été installée par live DVD et sa configuration est simple : KDE, Opera, Skype, VLC, Dropbox, Wine, QupZilla...
À ce moment cela ne concernait que LO. Maintenant j'ai des plantages réguliers avec thunderbird, QupZilla et récemment avec okular.
Thunderbird ne s'affiche plus quand je clique sur l'icone et plante jusqu'au redémarrage système.
Okular a planté mais a redémarré correctement sans redémarrage.
Je n'ai jamais eu ce genre de soucis depuis que je suis sur mageia.
Ma mageia 3 a été installée par live DVD et sa configuration est simple : KDE, Opera, Skype, VLC, Dropbox, Wine, QupZilla...
Tu a verifié le ventilo de ton process ? ? ?
ce genre de "plantage" et un des symptome du deces du ventilo du processeur (= surchauffe)
"Si ma façon de m'exprimer, mon orthographe, etc, ne vous convient pas...
Ne vous sentez pas obligé de répondre, zappez ! ...
Quand le sage montre la lune, le sot regarde le doigt.
L'intelligence ? c'est reconnaitre son ignorance.
Confucius
Poser une question et être stupide 5 mn, ne pas la poser, c'est l'être toute sa vie ...
ofaurax Membre non connecté
-
- Voir le profil du membre ofaurax
- Inscrit le : 27/03/2008
- Site internet
- Groupes :
Tu ouvres un terminal et tu tapes "libreoffice" et tu fais Entrée.
Mais si ça te fait ça un peu tout le temps, tu peux aussi regarder sur tes logs système dans /var/log.
Au moment où tu as un soucis, tu notes l'heure, et tu vas voir dans ces fichiers s'il s'est passé quelque chose de spécial à ce moment-là...
Bosco Membre non connecté
-
- Voir le profil du membre Bosco
- Inscrit le : 27/10/2011
- Site internet
- Groupes :
Puis m'est venue une idée lors d'un redémarrage : redémarrer sur un ancien kernel...
Et là miracle : tout fonctionne au poil
Je fais toujours toutes les mises à jour proposées, partant du principe que je fais confiance aux devs de mageia, qui sont beaucoup plus compétents que moi
Je sais aussi que certains d'entre-vous ne font pas ces mises à jours automatiquement.
J'étais sur le kernel 3.8.13.4-1, le dernier proposé, et j'ai donc redémarré sur le précédent : 3.8.13-1, qui a résolu mon problème
Y-a-t'il des soucis connus avec le dernier kernel ou est-ce un conflit avec qqchose chez moi ?
Merci d'avance
ofaurax Membre non connecté
-
- Voir le profil du membre ofaurax
- Inscrit le : 27/03/2008
- Site internet
- Groupes :
Apparemment, il y avait un paquet de modifs :
http://sophie.zarb.org/rpms/075ab54540727a5505763b87cff61959/changelog
C'est un bug à remonter, à mon avis.
Édité par ofaurax Le 20/07/2013 à 02h18
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie