pilotes pour carte graphique nvidia géforce 9600 gt [Réglé]
activer la licence
Système et matériels / Cartes graphiques et webcams

mageia13 Membre non connecté
-
- Voir le profil du membre mageia13
- Inscrit le : 27/05/2012
Je suis sur Mageia 2 x64 , J'ai telechargé le pilote de ma carte graphique nvidia géforce 9600 gt, NVIDIA-Linux-x86_64-295.53.run .
Pour l'installer j'ai tapé dans le terminal
# chmod +x NVIDIA-Linux-x86_64-295.53.run
# init 3
# ./ NVIDIA-Linux-x86_64-295.53.run
# init 3
# ./ NVIDIA-Linux-x86_64-295.53.run
quand il me demandait d'activer la licence, je n'y arrivais pas , il selectionnait tjr ne pas activer la licence .
Comment fait ton pour activer la licence dans le terminal, y a t'il une touche specifique pour cela ?
Merci.
Mageia2 x86_64 / msi/ Pentium 2.4 Ghz quad / 8 Go ram

Adrien.D Membre non connecté
-
- Voir le profil du membre Adrien.D
- Inscrit le : 30/05/2011
- Site internet
- Groupes :
Pour activer la licence, il me semble qu'il faut aller jusqu'en bas puis presser tabulation pour afficher les deux boutons "Accept" ou "Reject".
En revanche, pourquoi n'installes-tu pas le pilote de cette manière: http://www.mageialinux-online.org/wiki/installer-les-pilotes-proprietaires-nvidia-et-ati-sur-mageia
A+
Config : PC Fixe : X470 GAMING PRO- AMD Ryzen 5 2600X - 16Go RAM - Radeon RX 560 (Pilote libre) - Gentoo Linux - GNOME Desktop - Kernel 5.10 LTS
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !
Ancien Webmaster de MageiaLinuxOnline. Les remplaçants assurent !


mageia13 Membre non connecté
-
- Voir le profil du membre mageia13
- Inscrit le : 27/05/2012
Quand j'active la licence, j'ai ce message
ERROR:TheNouveaukerneldriveriscurrentlyinusebyyoursystem.Thisdriveris
incompatiblewiththeNVIDIAdriver,andmustbedisabledbeforeproceeding.
PleaseconsulttheNVIDIAdriverREADMEandyourLinuxdistribution's
documentationfordetailsonhowtocorrectlydisabletheNouveaukerneldriver.
ERROR:Installationhasfailed.Pleaseseethefile'/var/log/nvidia-installer.log'for
details.YoumayfindsuggestionsonfixinginstallationproblemsintheREADMEthis
availableontheLinuxdriverdownloadpageatwww.nvidia.com.tion's
documentationfordetailsonhowtocorrectlydisabletheNouveaukerneldriver.
incompatiblewiththeNVIDIAdriver,andmustbedisabledbeforeproceeding.
PleaseconsulttheNVIDIAdriverREADMEandyourLinuxdistribution's
documentationfordetailsonhowtocorrectlydisabletheNouveaukerneldriver.
ERROR:Installationhasfailed.Pleaseseethefile'/var/log/nvidia-installer.log'for
details.YoumayfindsuggestionsonfixinginstallationproblemsintheREADMEthis
availableontheLinuxdriverdownloadpageatwww.nvidia.com.tion's
documentationfordetailsonhowtocorrectlydisabletheNouveaukerneldriver.
nvidia-installer.log
[root@localhost bash]# cat /var/log/nvidia-installer.log
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun May 27 23:36:01 2012
installer version: 295.53
PATH: /sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/lib64/qt4/bin
nvidia-installer command line:
./nvidia-installer
Using: nvidia-installer ncurses user interface
-> License accepted.
-> Installing NVIDIA driver version 295.53.
ERROR: The Nouveau kernel driver is currently in use by your system. This driver is incompatible with the NVIDIA driver, and must be disabled before proceeding. Please consult the NVIDIA driver README and your Linux distribution's documentation for details on how to correctly disable the Nouveau kernel driver.
-> For some distributions, Nouveau can be disabled by adding a file in the modprobe configuration directory. Would you like nvidia-installer to attempt to create this modprobe file for you? (Answer: Yes)
-> The modprobe configuration file to disable Nouveau, /etc/modprobe.d/nvidia-installer-disable-nouveau.conf, has been written. For some distributions, this may be sufficient to disable Nouveau; other distributions may require modification of the initial ramdisk. Please reboot your system and attempt NVIDIA driver installation again. Note if you later wish to reenable Nouveau, you will need to delete the file /etc/modprobe.d/nvidia-installer-disable-nouveau.conf.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com.
[root@localhost bash]#
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun May 27 23:36:01 2012
installer version: 295.53
PATH: /sbin:/usr/sbin:/bin:/usr/bin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/lib64/qt4/bin
nvidia-installer command line:
./nvidia-installer
Using: nvidia-installer ncurses user interface
-> License accepted.
-> Installing NVIDIA driver version 295.53.
ERROR: The Nouveau kernel driver is currently in use by your system. This driver is incompatible with the NVIDIA driver, and must be disabled before proceeding. Please consult the NVIDIA driver README and your Linux distribution's documentation for details on how to correctly disable the Nouveau kernel driver.
-> For some distributions, Nouveau can be disabled by adding a file in the modprobe configuration directory. Would you like nvidia-installer to attempt to create this modprobe file for you? (Answer: Yes)
-> The modprobe configuration file to disable Nouveau, /etc/modprobe.d/nvidia-installer-disable-nouveau.conf, has been written. For some distributions, this may be sufficient to disable Nouveau; other distributions may require modification of the initial ramdisk. Please reboot your system and attempt NVIDIA driver installation again. Note if you later wish to reenable Nouveau, you will need to delete the file /etc/modprobe.d/nvidia-installer-disable-nouveau.conf.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at www.nvidia.com.
[root@localhost bash]#
[root@localhost bash]# rpm -qa | grep nvidia
nvidia-current-doc-html-295.49-2.mga2.nonfree
nvidia-current-kernel-desktop-latest-295.49-4.mga2.nonfree
nvidia-current-kernel-3.3.6-desktop-2.mga2-295.49-4.mga2.nonfree
x11-driver-video-nvidia-current-295.49-2.mga2.nonfree
[root@localhost bash]#
nvidia-current-doc-html-295.49-2.mga2.nonfree
nvidia-current-kernel-desktop-latest-295.49-4.mga2.nonfree
nvidia-current-kernel-3.3.6-desktop-2.mga2-295.49-4.mga2.nonfree
x11-driver-video-nvidia-current-295.49-2.mga2.nonfree
[root@localhost bash]#
Merci.
Mageia2 x86_64 / msi/ Pentium 2.4 Ghz quad / 8 Go ram

paradise Membre non connecté
-
- Voir le profil du membre paradise
- Inscrit le : 08/06/2011
- Groupes :
Ensuite seulement tu peux installer ton run, et pour cliquer sur "Accept" et "OK", sers-toi des flèches D et G, puis de la touche Enter bien sûr.
Mais bon, Mageia fournit le dkms avec le pilote 295.49, c'est encore plus simple.
Tu fais un urpmi --auto-update en console pour forcer la Màj qui contient le dkms si tu as bien activé les sources nonfree.
Il faut aussi blacklister le pilote "nouveau" et le désinstaller, et au reboot tu lances XFdrake qui te proposera le 295.49 du dkms.

Édité par paradise Le 28/05/2012 à 02h27
PC bureau : CM Asus B-250 - Cpu Intel i5-7600K - RAM 16 Go DDR4 2400 - CG 1050 TI 4Go - Webcam Hercules Infinite
OS : Mageia 7 KDE
OS : Mageia 7 KDE

mageia13 Membre non connecté
-
- Voir le profil du membre mageia13
- Inscrit le : 27/05/2012
Merci Adrien.D tout est revenu dans l'ordre avec votre tuto.
Maintenant j'ai 2 écrans
Merci.
Mageia2 x86_64 / msi/ Pentium 2.4 Ghz quad / 8 Go ram
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie