Ajouter une carte video usb

Soit en tout 3 écrans Système et matériels / Cartes graphiques et webcams

xunil2003 Membre non connecté

Le 14/04/2012 à 22h31

Bonjour

Je suis sus Mageia 1 x64 avec KDE.

J'ai acheté une carte video usb TECNAXX UGA. avec d'intégré une carte son.

Model : UGA Multiadapter-1080P

http://www.jlgdiscount.fr/cartes-video-usb/233-carte-graphique-externe-usb-uga-technaxx-4260101734068.html

J'ai déjas une carte graphique PCIe GeForce GTX 260 dans le PC avec 2 écrans connecté et configurer avec Nvidia X Serveur Setting.

Objetif : Installer la carte si Mageia ne la pas reconnu, afin d'optenir un 3éme écran pour travailler.

En attendent le 3eme écran et connecté sur la carte graphique usb, est l'écran et tout vert.

Détection : extrait de lsusb

002 Device 011: ID 1a40:0101 TERMINUS TECHNOLOGY INC. USB-2.0 4-Port HUB

Bus 002 Device 015: ID 0d8c:000e C-Media Electronics, Inc. Audio Adapter (Planet UP-100, Genius G-Talk)

Bus 002 Device 016: ID 17e9:0360 Newnham Research

Dans ccm (Centre de Control de Mageia) j'ai dans matériel

A Gauche dans : Matériel Détecté

Inconnu/Autre

USB to DVI-17

A la fenêtre de droite dans : Information

Identification

Fabriquant ; Display link

Descriptif USB to DVI-17

Classe de matériel : (Rien)

Connexion

Bus : usb

Bus PCI n°: 2

Périphérique PCI n°: 16

identifiant du fabriquant : 0x17e9

Identifiant du périphérique : 0x360

Drivers

Module : udlfb

J'ai de fournis avec la carte usb un cdrom avec les fichiers suivant :

[root@localhost laurent]# ls -alF /home/laurent/Pilotes/Tecnaxx-UGA/

total 1168

drwxrwxr-x 4 laurent laurent 4096 avril 14 21:52 ./

drwxrwxr-x 21 laurent laurent 4096 avril 14 21:45 ../

-r-xr-xr-x 1 laurent laurent 220 juin 5 2009 DisplayLink LGPL Library - libdlo.url*

-r-xr-xr-x 1 laurent laurent 127485 juin 5 2009 Guide-v104.pdf*

drwxrwxr-x 6 laurent laurent 4096 mai 15 2009 libdlo-0.1.0/

-r-xr-xr-x 1 laurent laurent 476274 juin 5 2009 libdlo-0.1.0.tar.gz*

drwxrwxr-x 6 laurent laurent 4096 oct. 19 2009 libdlo-0.1.2/

-r-xr-xr-x 1 laurent laurent 476865 oct. 24 2009 libdlo-0.1.2.tar.gz*

-r-xr-xr-x 1 laurent laurent 83131 juin 5 2009 Readme.mht*

[root@localhost laurent]#

Le fichier "DisplayLink LGPL Library - libdlo.url " pointe ici -----> http://freedesktop.org/wiki/Software/libdlo

Question doc installation y a rien.

Mon fichier "/etc/X11/xorg.conf" configurer avec mes 2 écrans sur ma carte Nvidia GeForce GTX 260

# nvidia-settings: X configuration file generated by nvidia-settings

# nvidia-settings: version 275.09.07 (iurt@jonund.mageia.org) Thu Jun 16 02:19:09 UTC 2011

Section "ServerLayout"

Identifier "Layout0"

Screen 0 "Screen0" 0 0

InputDevice "Keyboard0" "CoreKeyboard"

InputDevice "Mouse0" "CorePointer"

Option "Xinerama" "0"

EndSection

Section "Files"

FontPath "/usr/share/fonts/default/Type1"

EndSection

Section "InputDevice"

# generated from default

Identifier "Mouse0"

Driver "mouse"

Option "Protocol" "auto"

Option "Device" "/dev/psaux"

Option "Emulate3Buttons" "no"

Option "ZAxisMapping" "4 5"

EndSection

Section "InputDevice"

# generated from data in "/etc/sysconfig/keyboard"

Identifier "Keyboard0"

Driver "kbd"

Option "XkbLayout" "fr"

Option "XkbModel" "pc105"

EndSection

Section "Monitor"

# HorizSync source: edid, VertRefresh source: edid

Identifier "Monitor0"

VendorName "Unknown"

ModelName "Samsung SyncMaster"

HorizSync 30.0 - 81.0

VertRefresh 56.0 - 75.0

Option "DPMS"

EndSection

Section "Device"

Identifier "Device0"

Driver "nvidia"

VendorName "NVIDIA Corporation"

BoardName "GeForce GTX 260"

EndSection

Section "Screen"

Identifier "Screen0"

Device "Device0"

Monitor "Monitor0"

DefaultDepth 24

Option "TwinView" "1"

Option "TwinViewXineramaInfoOrder" "CRT-0"

Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1280+0"

SubSection "Display"

Depth 24

EndSubSection

EndSection

J'ai donc plusieurs questions :

1/ Le matériel est il détecté par Mageia du faite qu'il y a le nom du module dans "Autre" ?

2/ Comment faut il procéder a l'installation des fichier fournis si Mageia n'a pas reconnu le matériel ?

3/ Comment dois je faire pour a jouter mon 3ème écran afin de faire glisser les fenêtre d'écran à écran ?

4/ Faudra t'il configurer mon 3eme écran avec "Nvidia X Serveur Setting" pour faire glisser les fenêtres d'écran a écran ?

Merci.

Édité par xunil2003 Le 15/04/2012 à 15h28

- Pentium I7 960 (3.20 Ghz - 8 Coeurs) / MSI / 6 G0 ram / Lamp / Mandriva 2010.0 x64/ KDE 4 / 5 HDD de 2 To a 7200 tr et 1 de 160 Go Velociraptor a 10000 Tr.
- Pentium I7 950 (3.07 Ghz - 8 Coeurs)/ Asus Sabertooth X58 / 12 Go Ram / Nvidia GeForce GTX 260 (3D)/ RealTek High Definition Audio /Renesas Electronics USB 3.0 Host Controller / Marvell 91xx SATA 6G Controlleur / Mageia 2 x86_64/ KDE 4 / Windows 7 x64 /3 HDD de 2 To a 7200 tr / Virtualbox 4.12.
- Pentium I5 Sandry bridge (5 Coeurs)/ Gigabyte / 12 G0 ram / Mageia 1 x64 / KDE 4 / 2 HDD de 1 To a 7200 tr.
- MSI GT780DX-644-Fr / I7 2.2 Ghz / 12 Mo Ram / Mageia 1 x64 / Windows 7 x64 / 2 HDD 750 Go a 7200 Tr / Nvidia / 17.2 Pouces.
- DreamPlug / Marvel 1.22 Ghz / Architecture ARM / 512 Mo / Carte-sd 16 Go / Debian Squeeze / 5 Watts --> appellé également plug computer
Proverbe : Windows a un pépin, Linux un noyau.
Accro de linux.

xunil2003 Membre non connecté

Le 15/04/2012 à 15h47

#121361

Bonjour,

Faute de réponse, je décide d'installer le pilote, seulement il me dit :

configure: error: Can't find libusb. On ubuntu, try sudo apt-get install libusb-dev

./configure

[root@localhost libdlo-0.1.2]# ./configure

checking for a BSD-compatible install... /usr/bin/install -c

checking whether build environment is sane... yes

checking for a thread-safe mkdir -p... /bin/mkdir -p

checking for gawk... gawk

checking whether make sets $(MAKE)... yes

checking for style of include used by make... GNU

checking for gcc... gcc

checking for C compiler default output file name... a.out

checking whether the C compiler works... yes

checking whether we are cross compiling... no

checking for suffix of executables...

checking for suffix of object files... o

checking whether we are using the GNU C compiler... yes

checking whether gcc accepts -g... yes

checking for gcc option to accept ISO C89... none needed

checking dependency style of gcc... gcc3

checking how to run the C preprocessor... gcc -E

checking for grep that handles long lines and -e... /bin/grep

checking for egrep... /bin/grep -E

checking for ANSI C header files... yes

checking for sys/types.h... yes

checking for sys/stat.h... yes

checking for stdlib.h... yes

checking for string.h... yes

checking for memory.h... yes

checking for strings.h... yes

checking for inttypes.h... yes

checking for stdint.h... yes

checking for unistd.h... yes

checking minix/config.h usability... no

checking minix/config.h presence... no

checking for minix/config.h... no

checking whether it is safe to define __EXTENSIONS__... yes

checking for gcc... (cached) gcc

checking whether we are using the GNU C compiler... (cached) yes

checking whether gcc accepts -g... (cached) yes

checking for gcc option to accept ISO C89... (cached) none needed

checking dependency style of gcc... (cached) gcc3

checking build system type... x86_64-unknown-linux-gnu

checking host system type... x86_64-unknown-linux-gnu

checking for a sed that does not truncate output... /bin/sed

checking for fgrep... /bin/grep -F

checking for ld used by gcc... /usr/bin/ld

checking if the linker (/usr/bin/ld) is GNU ld... yes

checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B

checking the name lister (/usr/bin/nm -B) interface... BSD nm

checking whether ln -s works... yes

checking the maximum length of command line arguments... 1572864

checking whether the shell understands some XSI constructs... yes

checking whether the shell understands "+="... yes

checking for /usr/bin/ld option to reload object files... -r

checking for objdump... objdump

checking how to recognize dependent libraries... pass_all

checking for ar... ar

checking for strip... strip

checking for ranlib... ranlib

checking command to parse /usr/bin/nm -B output from gcc object... ok

checking for dlfcn.h... yes

checking for objdir... .libs

checking if gcc supports -fno-rtti -fno-exceptions... no

checking for gcc option to produce PIC... -fPIC -DPIC

checking if gcc PIC flag -fPIC -DPIC works... yes

checking if gcc static flag -static works... no

checking if gcc supports -c -o file.o... yes

checking if gcc supports -c -o file.o... (cached) yes

checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes

checking whether -lc should be explicitly linked in... no

checking dynamic linker characteristics... GNU/Linux ld.so

checking how to hardcode library paths into programs... immediate

checking whether stripping libraries is possible... yes

checking if libtool supports shared libraries... yes

checking whether to build shared libraries... yes

checking whether to build static libraries... yes

checking for stdint.h... (cached) yes

checking for stdlib.h... (cached) yes

checking for string.h... (cached) yes

checking usb.h usability... no

checking usb.h presence... no

checking for usb.h... no

checking for stdbool.h that conforms to C99... yes

checking for _Bool... yes

checking for inline... inline

checking for int32_t... yes

checking for size_t... yes

checking for uint16_t... yes

checking for uint32_t... yes

checking for uint64_t... yes

checking for uint8_t... yes

checking for usb_open in -lusb... no

checking for usb_get_driver_np... no

configure: error: Can't find libusb. On ubuntu, try sudo apt-get install libusb-dev

[root@localhost libdlo-0.1.2]#

Il dit qui lui manque " libusb-dev" je décide de l'installer

[root@localhost libdlo-0.1.2]#urpmi libusb-dev

Pas de paquetage nommé libusb-dev

[root@localhost libdlo-0.1.2]#

Comment il faut faire dans ce cas la ?

Merci.

xunil2003 Membre non connecté

Le 15/04/2012 à 16h37

#121363

bonjour,

A mon avis la carte est installé et reconnu automatiquement par Mageia, car le module est bien indiqué dans Autre Matérie dans CCM

udlfb: DisplayLink USB device /dev/fb1 attached. 1280x1024 resolution. Using 5120K framebuffer memory

[root@localhost libdlo-0.1.2]# ls -alF /dev/fb*

lrwxrwxrwx 1 root root 3 avril 14 23:26 /dev/fb -> fb0

crw-rw---- 1 root video 29, 0 avril 14 21:26 /dev/fb0

crw-rw---- 1 root video 29, 1 avril 15 16:20 /dev/fb1

[root@localhost libdlo-0.1.2]#

[root@localhost libdlo-0.1.2]# cat /proc/fb

0 VESA VGA

1 udlfb

[root@localhost libdlo-0.1.2]#

Extrait de dmesg

Caché :

usb 2-4.1.4: New USB device found, idVendor=17e9, idProduct=0360

usb 2-4.1.4: Product: USB to DVI-17

usb 2-4.1.4: Manufacturer: DisplayLink[/block]

dmesg | grep udlfb

[root@localhost libdlo-0.1.2]# dmesg | grep udlfb

udlfb: DisplayLink USB to DVI-17 - serial #801661

udlfb: vid_17e9&pid_0360&rev_0111 driver's dlfb_data struct at ffff8803241c7800

udlfb: console enable=0

udlfb: fb_defio enable=0

udlfb: vendor descriptor length:1b data:1b 5f 01 0019 05 00 01 03 00 04

udlfb: DL chip limited to 2080000 pixel modes

udlfb: allocated 4 65024 byte urbs

udlfb: 1280x1024 valid mode

udlfb: 720x400 valid mode

udlfb: 640x480 valid mode

udlfb: 640x480 valid mode

udlfb: 640x480 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 1024x768 valid mode

udlfb: 1024x768 valid mode

udlfb: 1024x768 valid mode

udlfb: 1280x1024 valid mode

udlfb: 1152x864 valid mode

udlfb: 1280x960 valid mode

udlfb: 1280x1024 valid mode

udlfb: Reallocating framebuffer. Addresses will change!

udlfb: 1280x1024 valid mode

udlfb: set_par mode 1280x1024

udlfb: DisplayLink USB device /dev/fb1 attached. 1280x1024 resolution. Using 5120K framebuffer memory

usbcore: registered new interface driver udlfb

udlfb: USB disconnect starting

udlfb: fb_info for /dev/fb1 has been freed

udlfb: Waiting for completes and freeing all render urbs

udlfb: freeing dlfb_data ffff8803241c7800

udlfb: DisplayLink USB to DVI-17 - serial #801661

udlfb: vid_17e9&pid_0360&rev_0111 driver's dlfb_data struct at ffff880310933000

udlfb: console enable=0

udlfb: fb_defio enable=0

udlfb: vendor descriptor length:1b data:1b 5f 01 0019 05 00 01 03 00 04

udlfb: DL chip limited to 2080000 pixel modes

udlfb: allocated 4 65024 byte urbs

udlfb: 1280x1024 valid mode

udlfb: 720x400 valid mode

udlfb: 640x480 valid mode

udlfb: 640x480 valid mode

udlfb: 640x480 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 1024x768 valid mode

udlfb: 1024x768 valid mode

udlfb: 1024x768 valid mode

udlfb: 1280x1024 valid mode

udlfb: 1152x864 valid mode

udlfb: 1280x960 valid mode

udlfb: 1280x1024 valid mode

udlfb: Reallocating framebuffer. Addresses will change!

udlfb: 1280x1024 valid mode

udlfb: set_par mode 1280x1024

udlfb: DisplayLink USB device /dev/fb1 attached. 1280x1024 resolution. Using 5120K framebuffer memory

udlfb: USB disconnect starting

udlfb: fb_info for /dev/fb1 has been freed

udlfb: Waiting for completes and freeing all render urbs

udlfb: freeing dlfb_data ffff880310933000

udlfb: DisplayLink USB to DVI-17 - serial #801661

udlfb: vid_17e9&pid_0360&rev_0111 driver's dlfb_data struct at ffff88032476d000

udlfb: console enable=0

udlfb: fb_defio enable=0

udlfb: vendor descriptor length:1b data:1b 5f 01 0019 05 00 01 03 00 04

udlfb: DL chip limited to 2080000 pixel modes

udlfb: allocated 4 65024 byte urbs

udlfb: 1280x1024 valid mode

udlfb: 720x400 valid mode

udlfb: 640x480 valid mode

udlfb: 640x480 valid mode

udlfb: 640x480 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 1024x768 valid mode

udlfb: 1024x768 valid mode

udlfb: 1024x768 valid mode

udlfb: 1280x1024 valid mode

udlfb: 1152x864 valid mode

udlfb: 1280x960 valid mode

udlfb: 1280x1024 valid mode

udlfb: Reallocating framebuffer. Addresses will change!

udlfb: 1280x1024 valid mode

udlfb: set_par mode 1280x1024

udlfb: DisplayLink USB device /dev/fb1 attached. 1280x1024 resolution. Using 5120K framebuffer memory

udlfb: USB disconnect starting

udlfb: fb_info for /dev/fb1 has been freed

udlfb: Waiting for completes and freeing all render urbs

udlfb: freeing dlfb_data ffff88032476d000

udlfb: DisplayLink USB to DVI-17 - serial #801661

udlfb: vid_17e9&pid_0360&rev_0111 driver's dlfb_data struct at ffff880310937000

udlfb: console enable=0

udlfb: fb_defio enable=0

udlfb: vendor descriptor length:1b data:1b 5f 01 0019 05 00 01 03 00 04

udlfb: DL chip limited to 2080000 pixel modes

udlfb: allocated 4 65024 byte urbs

udlfb: 1280x1024 valid mode

udlfb: 720x400 valid mode

udlfb: 640x480 valid mode

udlfb: 640x480 valid mode

udlfb: 640x480 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 1024x768 valid mode

udlfb: 1024x768 valid mode

udlfb: 1024x768 valid mode

udlfb: 1280x1024 valid mode

udlfb: 1152x864 valid mode

udlfb: 1280x960 valid mode

udlfb: 1280x1024 valid mode

udlfb: Reallocating framebuffer. Addresses will change!

udlfb: 1280x1024 valid mode

udlfb: set_par mode 1280x1024

udlfb: DisplayLink USB device /dev/fb1 attached. 1280x1024 resolution. Using 5120K framebuffer memory

udlfb: USB disconnect starting

udlfb: fb_info for /dev/fb1 has been freed

udlfb: Waiting for completes and freeing all render urbs

udlfb: freeing dlfb_data ffff880310937000

udlfb: DisplayLink USB to DVI-17 - serial #801661

udlfb: vid_17e9&pid_0360&rev_0111 driver's dlfb_data struct at ffff880310930800

udlfb: console enable=0

udlfb: fb_defio enable=0

udlfb: vendor descriptor length:1b data:1b 5f 01 0019 05 00 01 03 00 04

udlfb: DL chip limited to 2080000 pixel modes

udlfb: allocated 4 65024 byte urbs

udlfb: 1280x1024 valid mode

udlfb: 720x400 valid mode

udlfb: 640x480 valid mode

udlfb: 640x480 valid mode

udlfb: 640x480 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 1024x768 valid mode

udlfb: 1024x768 valid mode

udlfb: 1024x768 valid mode

udlfb: 1280x1024 valid mode

udlfb: 1152x864 valid mode

udlfb: 1280x960 valid mode

udlfb: 1280x1024 valid mode

udlfb: Reallocating framebuffer. Addresses will change!

udlfb: 1280x1024 valid mode

udlfb: set_par mode 1280x1024

udlfb: DisplayLink USB device /dev/fb1 attached. 1280x1024 resolution. Using 5120K framebuffer memory

udlfb: USB disconnect starting

udlfb: fb_info for /dev/fb1 has been freed

udlfb: Waiting for completes and freeing all render urbs

udlfb: freeing dlfb_data ffff880310930800

udlfb: DisplayLink USB to DVI-17 - serial #801661

udlfb: vid_17e9&pid_0360&rev_0111 driver's dlfb_data struct at ffff880260079800

udlfb: console enable=0

udlfb: fb_defio enable=0

udlfb: vendor descriptor length:1b data:1b 5f 01 0019 05 00 01 03 00 04

udlfb: DL chip limited to 2080000 pixel modes

udlfb: allocated 4 65024 byte urbs

udlfb: 1280x1024 valid mode

udlfb: 720x400 valid mode

udlfb: 640x480 valid mode

udlfb: 640x480 valid mode

udlfb: 640x480 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 800x600 valid mode

udlfb: 1024x768 valid mode

udlfb: 1024x768 valid mode

udlfb: 1024x768 valid mode

udlfb: 1280x1024 valid mode

udlfb: 1152x864 valid mode

udlfb: 1280x960 valid mode

udlfb: 1280x1024 valid mode

udlfb: Reallocating framebuffer. Addresses will change!

udlfb: 1280x1024 valid mode

udlfb: set_par mode 1280x1024

udlfb: DisplayLink USB device /dev/fb1 attached. 1280x1024 resolution. Using 5120K framebuffer memory

[root@localhost libdlo-0.1.2]#

Après je ne comprend pas ce qu'il faut faire ???

[block][root@localhost libdlo-0.1.2]# ls -alF /etc/modprobe.d/

total 36

drwxr-xr-x 2 root root 4096 févr. 9 16:59 ./

drwxr-xr-x 140 root root 12288 avril 15 14:20 ../

-rw-r--r-- 1 root root 849 mai 11 2011 blacklist-compat

-rw-r--r-- 1 root root 704 mai 11 2011 blacklist-mga

lrwxrwxrwx 1 root root 37 févr. 9 16:59 display-driver.conf -> /etc/alternatives/display-driver.conf

-rw-r--r-- 1 root root 84 mai 11 2011 ipw-no-associate.conf

-rw-r--r-- 1 root root 105 mai 19 2011 snd-oss

-rw-r--r-- 1 root root 114 mai 19 2011 snd-usb-audio

[root@localhost libdlo-0.1.2]#

[root@localhost libdlo-0.1.2]# cat /etc/modprobe.d/display-driver.conf

install nvidia /sbin/modprobe nvidia-current $CMDLINE_OPTS

[root@localhost libdlo-0.1.2]# ls /etc/modprobe.d/

Question :

Donc le mieux et de la déclarée dans /etc/X11/xorg.conf (soit une section "Device" supplémentaire à ajouter) et qu"une section "Screen" correspondant au 3e écran référence ce device supplémentaire.

Quand pensez vous car lsusb et dmesg dit quel est bien reconnu ?

Merci.

Édité par xunil2003 Le 16/04/2012 à 13h23

xunil2003 Membre non connecté

Le 16/04/2012 à 17h12

#121427

Bonjour,

J'ai quand même essayé d'installer le pilote, mais lorsque je fait "make install" j'ai ce message :

make: *** Aucune règle pour fabriquer la cible « install ». Arrêt.

Notice d'installation du pilote :

Caché :

* Install a compatible libusb version (0.13)

* on ubuntu - "sudo apt-get install libusb"

* Plug in a compatible DisplayLink USB device

To start the build process, open a shell prompt (as the user who's home

directory the libdlo is installed into) and change to the libdlo directory

to run

$ ./configure

$ sudo make install

$ make check[/block]

Installation du pilote

[root@localhost laurent]# urpmi libusb1.0-devel

Pour satisfaire les dépendances, les paquetages suivants vont être installés :

Paquetage Version Révision Arch

(média « Core 32bit Updates (distrib33) »)

libusb1.0-devel 1.0.8 1.1.mga1 i586

libusb1.0_0 1.0.8 1.1.mga1 i586

un espace additionnel de 859Ko sera utilisé.

136Ko de paquets seront récupérés.

Procéder à l'installation des 2 paquetages ? (O/n) o

$MIRRORLIST: media/../../i586/media/core/updates/libusb1.0-devel-1.0.8-1.1.mga1.i586.rpm

$MIRRORLIST: media/../../i586/media/core/updates/libusb1.0_0-1.0.8-1.1.mga1.i586.rpm

installation de libusb1.0-devel-1.0.8-1.1.mga1.i586.rpm libusb1.0_0-1.0.8-1.1.mga1.i586.rpm depuis /var/cache/urpmi/rpms

Préparation ... ########################################################################################################

1/2: libusb1.0_0 ########################################################################################################

2/2: libusb1.0-devel ########################################################################################################

[root@localhost laurent]#

Caché :

[root@localhost laurent]# cd /home/laurent/Pilotes/Tecnaxx-UGA/libdlo-0.1.2/

[root@localhost libdlo-0.1.2]# ./configure

checking for a BSD-compatible install... /usr/bin/install -c

checking whether build environment is sane... yes

checking for a thread-safe mkdir -p... /bin/mkdir -p

checking for gawk... gawk

checking whether make sets $(MAKE)... yes

checking for style of include used by make... GNU

checking for gcc... gcc

checking for C compiler default output file name... a.out

checking whether the C compiler works... yes

checking whether we are cross compiling... no

checking for suffix of executables...

checking for suffix of object files... o

checking whether we are using the GNU C compiler... yes

checking whether gcc accepts -g... yes

checking for gcc option to accept ISO C89... none needed

checking dependency style of gcc... gcc3

checking how to run the C preprocessor... gcc -E

checking for grep that handles long lines and -e... /bin/grep

checking for egrep... /bin/grep -E

checking for ANSI C header files... yes

checking for sys/types.h... yes

checking for sys/stat.h... yes

checking for stdlib.h... yes

checking for string.h... yes

checking for memory.h... yes

checking for strings.h... yes

checking for inttypes.h... yes

checking for stdint.h... yes

checking for unistd.h... yes

checking minix/config.h usability... no

checking minix/config.h presence... no

checking for minix/config.h... no

checking whether it is safe to define __EXTENSIONS__... yes

checking for gcc... (cached) gcc

checking whether we are using the GNU C compiler... (cached) yes

checking whether gcc accepts -g... (cached) yes

checking for gcc option to accept ISO C89... (cached) none needed

checking dependency style of gcc... (cached) gcc3

checking build system type... x86_64-unknown-linux-gnu

checking host system type... x86_64-unknown-linux-gnu

checking for a sed that does not truncate output... /bin/sed

checking for fgrep... /bin/grep -F

checking for ld used by gcc... /usr/bin/ld

checking if the linker (/usr/bin/ld) is GNU ld... yes

checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B

checking the name lister (/usr/bin/nm -B) interface... BSD nm

checking whether ln -s works... yes

checking the maximum length of command line arguments... 1572864

checking whether the shell understands some XSI constructs... yes

checking whether the shell understands "+="... yes

checking for /usr/bin/ld option to reload object files... -r

checking for objdump... objdump

checking how to recognize dependent libraries... pass_all

checking for ar... ar

checking for strip... strip

checking for ranlib... ranlib

checking command to parse /usr/bin/nm -B output from gcc object... ok

checking for dlfcn.h... yes

checking for objdir... .libs

checking if gcc supports -fno-rtti -fno-exceptions... no

checking for gcc option to produce PIC... -fPIC -DPIC

checking if gcc PIC flag -fPIC -DPIC works... yes

checking if gcc static flag -static works... no

checking if gcc supports -c -o file.o... yes

checking if gcc supports -c -o file.o... (cached) yes

checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes

checking whether -lc should be explicitly linked in... no

checking dynamic linker characteristics... GNU/Linux ld.so

checking how to hardcode library paths into programs... immediate

checking whether stripping libraries is possible... yes

checking if libtool supports shared libraries... yes

checking whether to build shared libraries... yes

checking whether to build static libraries... yes

checking for stdint.h... (cached) yes

checking for stdlib.h... (cached) yes

checking for string.h... (cached) yes

checking usb.h usability... no

checking usb.h presence... no

checking for usb.h... no

checking for stdbool.h that conforms to C99... yes

checking for _Bool... yes

checking for inline... inline

checking for int32_t... yes

checking for size_t... yes

checking for uint16_t... yes

checking for uint32_t... yes

checking for uint64_t... yes

checking for uint8_t... yes

checking for usb_open in -lusb... no

checking for usb_get_driver_np... no

configure: error: Can't find libusb. On ubuntu, try sudo apt-get install libusb-dev

[root@localhost laurent]#

[block][root@localhost libdlo-0.1.2]# make install

make: *** Aucune règle pour fabriquer la cible « install ». Arrêt.

[root@localhost libdlo-0.1.2]#

Que faut il faire ?

Merci.

Édité par xunil2003 Le 16/04/2012 à 17h14

xunil2003 Membre non connecté

Le 19/04/2012 à 10h13

#121533

bonjour,

Pour forcer le "make" j'ignore quel option il faut ?

Caché :

[root@localhost libdlo-0.1.2]# ./configure --help

`configure' configures libdlo 0.1.2 to adapt to many kinds of systems.

Usage: ./configure [OPTION]... [VAR=VALUE]...

To assign environment variables (e.g., CC, CFLAGS...), specify them as

VAR=VALUE. See below for descriptions of some of the useful variables.

Defaults for the options are specified in brackets.

Configuration:

-h, --help display this help and exit

--help=short display options specific to this package

--help=recursive display the short help of all the included packages

-V, --version display version information and exit

-q, --quiet, --silent do not print `checking...' messages

--cache-file=FILE cache test results in FILE [disabled]

-C, --config-cache alias for `--cache-file=config.cache'

-n, --no-create do not create output files

--srcdir=DIR find the sources in DIR [configure dir or `..']

Installation directories:

--prefix=PREFIX install architecture-independent files in PREFIX

[/usr/local]

--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX

[PREFIX]

By default, `make install' will install all the files in

`/usr/local/bin', `/usr/local/lib' etc. You can specify

an installation prefix other than `/usr/local' using `--prefix',

for instance `--prefix=$HOME'.

For better control, use the options below.

Fine tuning of the installation directories:

--bindir=DIR user executables [EPREFIX/bin]

--sbindir=DIR system admin executables [EPREFIX/sbin]

--libexecdir=DIR program executables [EPREFIX/libexec]

--sysconfdir=DIR read-only single-machine data [PREFIX/etc]

--sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com]

--localstatedir=DIR modifiable single-machine data [PREFIX/var]

--libdir=DIR object code libraries [EPREFIX/lib]

--includedir=DIR C header files [PREFIX/include]

--oldincludedir=DIR C header files for non-gcc [/usr/include]

--datarootdir=DIR read-only arch.-independent data root [PREFIX/share]

--datadir=DIR read-only architecture-independent data [DATAROOTDIR]

--infodir=DIR info documentation [DATAROOTDIR/info]

--localedir=DIR locale-dependent data [DATAROOTDIR/locale]

--mandir=DIR man documentation [DATAROOTDIR/man]

--docdir=DIR documentation root [DATAROOTDIR/doc/libdlo]

--htmldir=DIR html documentation [DOCDIR]

--dvidir=DIR dvi documentation [DOCDIR]

--pdfdir=DIR pdf documentation [DOCDIR]

--psdir=DIR ps documentation [DOCDIR]

Program names:

--program-prefix=PREFIX prepend PREFIX to installed program names

--program-suffix=SUFFIX append SUFFIX to installed program names

--program-transform-name=PROGRAM run sed PROGRAM on installed program names

System types:

--build=BUILD configure for building on BUILD [guessed]

--host=HOST cross-compile to build programs to run on HOST [BUILD]

Optional Features:

--disable-option-checking ignore unrecognized --enable/--with options

--disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no)

--enable-FEATURE[=ARG] include FEATURE [ARG=yes]

--disable-dependency-tracking speeds up one-time build

--enable-dependency-tracking do not reject slow dependency extractors

--enable-shared[=PKGS] build shared libraries [default=yes]

--enable-static[=PKGS] build static libraries [default=yes]

--enable-fast-install[=PKGS]

optimize for fast installation [default=yes]

--disable-libtool-lock avoid locking (might break parallel builds)

Optional Packages:

--with-PACKAGE[=ARG] use PACKAGE [ARG=yes]

--without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)

--with-pic try to use only PIC/non-PIC objects [default=use

both]

--with-gnu-ld assume the C compiler uses GNU ld [default=no]

Some influential environment variables:

CC C compiler command

CFLAGS C compiler flags

LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a

nonstandard directory <lib dir>

LIBS libraries to pass to the linker, e.g. -l<library>

CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if

you have headers in a nonstandard directory <include dir>

CPP C preprocessor

Use these variables to override the choices made by `configure' or to help

it to find libraries and programs with nonstandard names/locations.

Report bugs to <libdlo@displaylink.com>.

[root@localhost libdlo-0.1.2]#

Merci

Édité par xunil2003 Le 23/04/2012 à 00h25

xunil2003 Membre non connecté

Le 22/04/2012 à 15h50

#121722

bonjour,

Le paquetage libusb-compat0.1-devel-0.1.3-4.mga1.i586 est déjas installé, j'ai toujours le même message :

checking minix/config.h usability... no

checking minix/config.h presence... no

checking for minix/config.h... no

checking if gcc supports -fno-rtti -fno-exceptions... no

checking if gcc static flag -static works... no

checking whether -lc should be explicitly linked in... no

checking for usb_open in -lusb... no

checking for usb_get_driver_np... no

configure: error: Can't find libusb. On ubuntu, try sudo apt-get install libusb-dev

[root@localhost libdlo-0.1.2]#

urpmi libusb-compat0.1-devel

[root@localhost laurent]# urpmi libusb-compat0.1-devel

Le paquetage libusb-compat0.1-devel-0.1.3-4.mga1.i586 est déjà installé

[root@localhost laurent]# cd libdlo-0.1.2/

./configure

Caché :

[root@localhost libdlo-0.1.2]# ./configure

checking for a BSD-compatible install... /usr/bin/install -c

checking whether build environment is sane... yes

checking for a thread-safe mkdir -p... /bin/mkdir -p

checking for gawk... gawk

checking whether make sets $(MAKE)... yes

checking for style of include used by make... GNU

checking for gcc... gcc

checking for C compiler default output file name... a.out

checking whether the C compiler works... yes

checking whether we are cross compiling... no

checking for suffix of executables...

checking for suffix of object files... o

checking whether we are using the GNU C compiler... yes

checking whether gcc accepts -g... yes

checking for gcc option to accept ISO C89... none needed

checking dependency style of gcc... gcc3

checking how to run the C preprocessor... gcc -E

checking for grep that handles long lines and -e... /bin/grep

checking for egrep... /bin/grep -E

checking for ANSI C header files... yes

checking for sys/types.h... yes

checking for sys/stat.h... yes

checking for stdlib.h... yes

checking for string.h... yes

checking for memory.h... yes

checking for strings.h... yes

checking for inttypes.h... yes

checking for stdint.h... yes

checking for unistd.h... yes

checking minix/config.h usability... no

checking minix/config.h presence... no

checking for minix/config.h... no

checking whether it is safe to define __EXTENSIONS__... yes

checking for gcc... (cached) gcc

checking whether we are using the GNU C compiler... (cached) yes

checking whether gcc accepts -g... (cached) yes

checking for gcc option to accept ISO C89... (cached) none needed

checking dependency style of gcc... (cached) gcc3

checking build system type... x86_64-unknown-linux-gnu

checking host system type... x86_64-unknown-linux-gnu

checking for a sed that does not truncate output... /bin/sed

checking for fgrep... /bin/grep -F

checking for ld used by gcc... /usr/bin/ld

checking if the linker (/usr/bin/ld) is GNU ld... yes

checking for BSD- or MS-compatible name lister (nm)... /usr/bin/nm -B

checking the name lister (/usr/bin/nm -B) interface... BSD nm

checking whether ln -s works... yes

checking the maximum length of command line arguments... 1572864

checking whether the shell understands some XSI constructs... yes

checking whether the shell understands "+="... yes

checking for /usr/bin/ld option to reload object files... -r

checking for objdump... objdump

checking how to recognize dependent libraries... pass_all

checking for ar... ar

checking for strip... strip

checking for ranlib... ranlib

checking command to parse /usr/bin/nm -B output from gcc object... ok

checking for dlfcn.h... yes

checking for objdir... .libs

checking if gcc supports -fno-rtti -fno-exceptions... no

checking for gcc option to produce PIC... -fPIC -DPIC

checking if gcc PIC flag -fPIC -DPIC works... yes

checking if gcc static flag -static works... no

checking if gcc supports -c -o file.o... yes

checking if gcc supports -c -o file.o... (cached) yes

checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes

checking whether -lc should be explicitly linked in... no

checking dynamic linker characteristics... GNU/Linux ld.so

checking how to hardcode library paths into programs... immediate

checking whether stripping libraries is possible... yes

checking if libtool supports shared libraries... yes

checking whether to build shared libraries... yes

checking whether to build static libraries... yes

checking for stdint.h... (cached) yes

checking for stdlib.h... (cached) yes

checking for string.h... (cached) yes

checking usb.h usability... yes

checking usb.h presence... yes

checking for usb.h... yes

checking for stdbool.h that conforms to C99... yes

checking for _Bool... yes

checking for inline... inline

checking for int32_t... yes

checking for size_t... yes

checking for uint16_t... yes

checking for uint32_t... yes

checking for uint64_t... yes

checking for uint8_t... yes

checking for usb_open in -lusb... no

checking for usb_get_driver_np... no

configure: error: Can't find libusb. On ubuntu, try sudo apt-get install libusb-dev

[root@localhost libdlo-0.1.2]#

Merci.

Édité par xunil2003 Le 22/04/2012 à 16h54

Répondre

Vous n'êtes pas autorisé à écrire dans cette catégorie

Notre Mission	Liens du site	Nous joindre	MLO est hébergé par
MLO est le forum francophone de la distribution Mageia et vous propose également un portail dédié aux débutants. MLO vous apporte un support sur la distribution grâce à son forum et vous offre des nouvelles de la distribution, des logiciels libres et de l'Open Source en général. Notre site a aussi pour but de vous montrer que Mageia est un système d'exploitation complet et facile à prendre en main. Vous apprendrez à installer simplement et à administrer efficacement votre système en un temps record.	Forum Documentation News du libre Mageia	Contacter MLO Mastodon MLO Flux RSS	MLO est un projet soutenu par Nos partenaires et amis
MLO est mis à disposition selon les termes de la licence Creative Commons.

xunil2003 Membre non connecté

xunil2003 Membre non connecté

eagleyes Membre non connecté

xunil2003 Membre non connecté

xunil2003 Membre non connecté

eagleyes Membre non connecté

xunil2003 Membre non connecté

paradise Membre non connecté

xunil2003 Membre non connecté

paradise Membre non connecté

xunil2003 Membre non connecté

paradise Membre non connecté

xunil2003 Membre non connecté

eagleyes Membre non connecté

paradise Membre non connecté