ABANDONNER-plus de touchpad suite a migration MGA7
touchpad fonctionne plus
Système et matériels / Installation et configuration
GPE GPE Membre non connecté
-
- Voir le profil du membre GPE GPE
- Inscrit le : 05/06/2011
- Groupes :
j'ai enfin migrer vers MGA7, pas sans problème, en ajoutant acpi=off au démarrage, mais voila le touchpad ne fonctionne plus!
je vous met une commande que j'ai trouvée sur le forum si ca vous parle!
lspcidrake -v
Caché :
[guy-jean@MSI ~]$ lspcidrake -v
i2c_i801 : Intel Corporation|100 Series/C230 Series Chipset Family SMBus [SERIAL_SMBUS] (vendor:8086 device:a123 subv:1462 subd:11c9) (rev: 31)
xhci_pci : Intel Corporation|100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [SERIAL_USB] (vendor:8086 device:a12f subv:1462 subd:11c9) (rev: 31)
Card:Intel 810 and later: Intel Corporation|HD Graphics 630 [DISPLAY_VGA] (vendor:8086 device:591b subv:1462 subd:11c9) (rev: 04)
intel_pch_thermal: Intel Corporation|100 Series/C230 Series Chipset Family Thermal Subsystem [SIGNAL_OTHER] (vendor:8086 device:a131 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [BRIDGE_HOST] (vendor:8086 device:5910 subv:1462 subd:11c9) (rev: 05)
snd_hda_intel : Intel Corporation|CM238 HD Audio Controller [MULTIMEDIA_AUDIO_DEV] (vendor:8086 device:a171 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|100 Series/C230 Series Chipset Family PCI Express Root Port #4 [BRIDGE_PCI] (vendor:8086 device:a113) (rev: f1)
Card:NVIDIA GeForce 635 series and later: NVIDIA Corporation|GP107M [GeForce GTX 1050 Mobile] [DISPLAY_3D] (vendor:10de device:1c8d subv:1462 subd:11c9) (rev: a1)
mei_me : Intel Corporation|100 Series/C230 Series Chipset Family MEI Controller #1 [COMMUNICATION_OTHER] (vendor:8086 device:a13a subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) [BRIDGE_PCI] (vendor:8086 device:1901) (rev: 05)
iwlwifi : Intel Corporation|Dual Band Wireless-AC 3168NGW [Stone Peak] [NETWORK_OTHER] (vendor:8086 device:24fb subv:8086 subd:2110) (rev: 10)
unknown : Intel Corporation|HM175 Chipset LPC/eSPI Controller [BRIDGE_ISA] (vendor:8086 device:a152 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|100 Series/C230 Series Chipset Family PCI Express Root Port #1 [BRIDGE_PCI] (vendor:8086 device:a110) (rev: f1)
unknown : Intel Corporation|100 Series/C230 Series Chipset Family Power Management Controller [MEMORY_OTHER] (vendor:8086 device:a121 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|HM170/QM170 Chipset SATA Controller [AHCI Mode] [STORAGE_SATA] (vendor:8086 device:a103 subv:1462 subd:11c9) (rev: 31)
alx : Qualcomm Atheros|QCA8171 Gigabit Ethernet [NETWORK_ETHERNET] (vendor:1969 device:10a1 subv:1462 subd:11c9) (rev: 10)
hub : Linux 5.3.13-desktop-2.mga7 xhci-hcd|xHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0002)
usbhid : PIXART|USB OPTICAL MOUSE [Human Interface Device|Boot Interface Subclass|Mouse] (vendor:093a device:2510)
usbhid : MSI EPF USB|MSI EPF USB [Human Interface Device|No Subclass|None] (vendor:1770 device:ff00)
btusb : Intel Corp.|Unknown [Wireless|Radio Frequency|Bluetooth] (vendor:8087 device:0aa7)
rtsx_usb : Generic|USB2.0-CRW (vendor:0bda device:0129)
hub : Linux 5.3.13-desktop-2.mga7 xhci-hcd|xHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0003)
hid_generic : MSI EPF USB MSI EPF USB
hid_generic : PIXART USB OPTICAL MOUSE
[guy-jean@MSI ~]$
i2c_i801 : Intel Corporation|100 Series/C230 Series Chipset Family SMBus [SERIAL_SMBUS] (vendor:8086 device:a123 subv:1462 subd:11c9) (rev: 31)
xhci_pci : Intel Corporation|100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [SERIAL_USB] (vendor:8086 device:a12f subv:1462 subd:11c9) (rev: 31)
Card:Intel 810 and later: Intel Corporation|HD Graphics 630 [DISPLAY_VGA] (vendor:8086 device:591b subv:1462 subd:11c9) (rev: 04)
intel_pch_thermal: Intel Corporation|100 Series/C230 Series Chipset Family Thermal Subsystem [SIGNAL_OTHER] (vendor:8086 device:a131 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [BRIDGE_HOST] (vendor:8086 device:5910 subv:1462 subd:11c9) (rev: 05)
snd_hda_intel : Intel Corporation|CM238 HD Audio Controller [MULTIMEDIA_AUDIO_DEV] (vendor:8086 device:a171 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|100 Series/C230 Series Chipset Family PCI Express Root Port #4 [BRIDGE_PCI] (vendor:8086 device:a113) (rev: f1)
Card:NVIDIA GeForce 635 series and later: NVIDIA Corporation|GP107M [GeForce GTX 1050 Mobile] [DISPLAY_3D] (vendor:10de device:1c8d subv:1462 subd:11c9) (rev: a1)
mei_me : Intel Corporation|100 Series/C230 Series Chipset Family MEI Controller #1 [COMMUNICATION_OTHER] (vendor:8086 device:a13a subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) [BRIDGE_PCI] (vendor:8086 device:1901) (rev: 05)
iwlwifi : Intel Corporation|Dual Band Wireless-AC 3168NGW [Stone Peak] [NETWORK_OTHER] (vendor:8086 device:24fb subv:8086 subd:2110) (rev: 10)
unknown : Intel Corporation|HM175 Chipset LPC/eSPI Controller [BRIDGE_ISA] (vendor:8086 device:a152 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|100 Series/C230 Series Chipset Family PCI Express Root Port #1 [BRIDGE_PCI] (vendor:8086 device:a110) (rev: f1)
unknown : Intel Corporation|100 Series/C230 Series Chipset Family Power Management Controller [MEMORY_OTHER] (vendor:8086 device:a121 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|HM170/QM170 Chipset SATA Controller [AHCI Mode] [STORAGE_SATA] (vendor:8086 device:a103 subv:1462 subd:11c9) (rev: 31)
alx : Qualcomm Atheros|QCA8171 Gigabit Ethernet [NETWORK_ETHERNET] (vendor:1969 device:10a1 subv:1462 subd:11c9) (rev: 10)
hub : Linux 5.3.13-desktop-2.mga7 xhci-hcd|xHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0002)
usbhid : PIXART|USB OPTICAL MOUSE [Human Interface Device|Boot Interface Subclass|Mouse] (vendor:093a device:2510)
usbhid : MSI EPF USB|MSI EPF USB [Human Interface Device|No Subclass|None] (vendor:1770 device:ff00)
btusb : Intel Corp.|Unknown [Wireless|Radio Frequency|Bluetooth] (vendor:8087 device:0aa7)
rtsx_usb : Generic|USB2.0-CRW (vendor:0bda device:0129)
hub : Linux 5.3.13-desktop-2.mga7 xhci-hcd|xHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0003)
hid_generic : MSI EPF USB MSI EPF USB
hid_generic : PIXART USB OPTICAL MOUSE
[guy-jean@MSI ~]$
merci pour toute aide
Édité par GPE GPE Le 18/12/2019 à 10h14
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
Je ne vois le vois pas. Je crains une conséquence du noacpi.
Jybz Membre non connecté
-
- Voir le profil du membre Jybz
- Inscrit le : 10/10/2018
- Groupes :
-
Administrateur
-
Forgeron
Citation :
hid_generic : PIXART USB OPTICAL MOUSE
Débranche ta souris.
Ou va dans paramètre du système → périphériques d'entrées → Pavé tactile → Activer/désactiver le pavé tactile → Désactiver le pavé tactile lorsqu'une souris est branchée
Ou, dans ce même onglet, ajoute ta souris dans les périphériques ignorés.
GPE GPE Membre non connecté
-
- Voir le profil du membre GPE GPE
- Inscrit le : 05/06/2011
- Groupes :
Jybz :
Débranche ta souris.
Ou va dans paramètre du système → périphériques d'entrées → Pavé tactile → Activer/désactiver le pavé tactile → Désactiver le pavé tactile lorsqu'une souris est branchée
Ou, dans ce même onglet, ajoute ta souris dans les périphériques ignorés.
Citation :
hid_generic : PIXART USB OPTICAL MOUSE
Débranche ta souris.
Ou va dans paramètre du système → périphériques d'entrées → Pavé tactile → Activer/désactiver le pavé tactile → Désactiver le pavé tactile lorsqu'une souris est branchée
Ou, dans ce même onglet, ajoute ta souris dans les périphériques ignorés.
Bonjour,
j'ai brancher une souris car sa fonctionne pas, quand au reste déjà fait, message en rouge aucun touchpad détecté!
merci de ton intérêt
GPE GPE Membre non connecté
-
- Voir le profil du membre GPE GPE
- Inscrit le : 05/06/2011
- Groupes :
Papoteur :
Bonjour,
Je ne vois le vois pas. Je crains une conséquence du noacpi.
Je ne vois le vois pas. Je crains une conséquence du noacpi.
Bonjour,
j'ai démarer en sans échec (root) avec startx le touchpad fonctionne et la j'ai refait la commande
lspcidrake -v
Caché :
[root@MSI ~]# lspcidrake -v
i2c_i801 : Intel Corporation|100 Series/C230 Series Chipset Family SMBus [SERIAL_SMBUS] (vendor:8086 device:a123 subv:1462 subd:11c9) (rev: 31)
xhci_pci : Intel Corporation|100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [SERIAL_USB] (vendor:8086 device:a12f subv:1462 subd:11c9) (rev: 31)
Card:Intel 810 and later: Intel Corporation|HD Graphics 630 [DISPLAY_VGA] (vendor:8086 device:591b subv:1462 subd:11c9) (rev: 04)
intel_pch_thermal: Intel Corporation|100 Series/C230 Series Chipset Family Thermal Subsystem [SIGNAL_OTHER] (vendor:8086 device:a131 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [BRIDGE_HOST] (vendor:8086 device:5910 subv:1462 subd:11c9) (rev: 05)
snd_hda_intel : Intel Corporation|CM238 HD Audio Controller [MULTIMEDIA_AUDIO_DEV] (vendor:8086 device:a171 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|100 Series/C230 Series Chipset Family PCI Express Root Port #4 [BRIDGE_PCI] (vendor:8086 device:a113) (rev: f1)
Card:NVIDIA GeForce 635 series and later: NVIDIA Corporation|GP107M [GeForce GTX 1050 Mobile] [DISPLAY_3D] (vendor:10de device:1c8d subv:1462 subd:11c9) (rev: a1)
mei_me : Intel Corporation|100 Series/C230 Series Chipset Family MEI Controller #1 [COMMUNICATION_OTHER] (vendor:8086 device:a13a subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) [BRIDGE_PCI] (vendor:8086 device:1901) (rev: 05)
iwlwifi : Intel Corporation|Dual Band Wireless-AC 3168NGW [Stone Peak] [NETWORK_OTHER] (vendor:8086 device:24fb subv:8086 subd:2110) (rev: 10)
unknown : Intel Corporation|HM175 Chipset LPC/eSPI Controller [BRIDGE_ISA] (vendor:8086 device:a152 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|100 Series/C230 Series Chipset Family PCI Express Root Port #1 [BRIDGE_PCI] (vendor:8086 device:a110) (rev: f1)
unknown : Intel Corporation|100 Series/C230 Series Chipset Family Power Management Controller [MEMORY_OTHER] (vendor:8086 device:a121 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|HM170/QM170 Chipset SATA Controller [AHCI Mode] [STORAGE_SATA] (vendor:8086 device:a103 subv:1462 subd:11c9) (rev: 31)
alx : Qualcomm Atheros|QCA8171 Gigabit Ethernet [NETWORK_ETHERNET] (vendor:1969 device:10a1 subv:1462 subd:11c9) (rev: 10)
hub : Linux 5.3.13-desktop-2.mga7 xhci-hcd|xHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0002)
usbhid : MSI EPF USB|MSI EPF USB [Human Interface Device|No Subclass|None] (vendor:1770 device:ff00)
btusb : Intel Corp.|Unknown [Wireless|Radio Frequency|Bluetooth] (vendor:8087 device:0aa7)
uvcvideo : Bison|BisonCam, NB Pro [Video|Video Control] (vendor:5986 device:0683)
rtsx_usb : Generic|USB2.0-CRW (vendor:0bda device:0129)
hub : Linux 5.3.13-desktop-2.mga7 xhci-hcd|xHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0003)
hid_generic : MSI EPF USB MSI EPF USB
[root@MSI ~]#
i2c_i801 : Intel Corporation|100 Series/C230 Series Chipset Family SMBus [SERIAL_SMBUS] (vendor:8086 device:a123 subv:1462 subd:11c9) (rev: 31)
xhci_pci : Intel Corporation|100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller [SERIAL_USB] (vendor:8086 device:a12f subv:1462 subd:11c9) (rev: 31)
Card:Intel 810 and later: Intel Corporation|HD Graphics 630 [DISPLAY_VGA] (vendor:8086 device:591b subv:1462 subd:11c9) (rev: 04)
intel_pch_thermal: Intel Corporation|100 Series/C230 Series Chipset Family Thermal Subsystem [SIGNAL_OTHER] (vendor:8086 device:a131 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|Xeon E3-1200 v6/7th Gen Core Processor Host Bridge/DRAM Registers [BRIDGE_HOST] (vendor:8086 device:5910 subv:1462 subd:11c9) (rev: 05)
snd_hda_intel : Intel Corporation|CM238 HD Audio Controller [MULTIMEDIA_AUDIO_DEV] (vendor:8086 device:a171 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|100 Series/C230 Series Chipset Family PCI Express Root Port #4 [BRIDGE_PCI] (vendor:8086 device:a113) (rev: f1)
Card:NVIDIA GeForce 635 series and later: NVIDIA Corporation|GP107M [GeForce GTX 1050 Mobile] [DISPLAY_3D] (vendor:10de device:1c8d subv:1462 subd:11c9) (rev: a1)
mei_me : Intel Corporation|100 Series/C230 Series Chipset Family MEI Controller #1 [COMMUNICATION_OTHER] (vendor:8086 device:a13a subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor PCIe Controller (x16) [BRIDGE_PCI] (vendor:8086 device:1901) (rev: 05)
iwlwifi : Intel Corporation|Dual Band Wireless-AC 3168NGW [Stone Peak] [NETWORK_OTHER] (vendor:8086 device:24fb subv:8086 subd:2110) (rev: 10)
unknown : Intel Corporation|HM175 Chipset LPC/eSPI Controller [BRIDGE_ISA] (vendor:8086 device:a152 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|100 Series/C230 Series Chipset Family PCI Express Root Port #1 [BRIDGE_PCI] (vendor:8086 device:a110) (rev: f1)
unknown : Intel Corporation|100 Series/C230 Series Chipset Family Power Management Controller [MEMORY_OTHER] (vendor:8086 device:a121 subv:1462 subd:11c9) (rev: 31)
unknown : Intel Corporation|HM170/QM170 Chipset SATA Controller [AHCI Mode] [STORAGE_SATA] (vendor:8086 device:a103 subv:1462 subd:11c9) (rev: 31)
alx : Qualcomm Atheros|QCA8171 Gigabit Ethernet [NETWORK_ETHERNET] (vendor:1969 device:10a1 subv:1462 subd:11c9) (rev: 10)
hub : Linux 5.3.13-desktop-2.mga7 xhci-hcd|xHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0002)
usbhid : MSI EPF USB|MSI EPF USB [Human Interface Device|No Subclass|None] (vendor:1770 device:ff00)
btusb : Intel Corp.|Unknown [Wireless|Radio Frequency|Bluetooth] (vendor:8087 device:0aa7)
uvcvideo : Bison|BisonCam, NB Pro [Video|Video Control] (vendor:5986 device:0683)
rtsx_usb : Generic|USB2.0-CRW (vendor:0bda device:0129)
hub : Linux 5.3.13-desktop-2.mga7 xhci-hcd|xHCI Host Controller [Hub|Unused|Full speed (or root) hub] (vendor:1d6b device:0003)
hid_generic : MSI EPF USB MSI EPF USB
[root@MSI ~]#
merci
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
Il y a ça aussi, mais ça semble être un clavier.
usbhid : MSI EPF USB|MSI EPF USB [Human Interface Device|No Subclass|None] (vendor:1770 device:ff00)
Tu confirmes, un clavier MSI sur USB ?
Jybz Membre non connecté
-
- Voir le profil du membre Jybz
- Inscrit le : 10/10/2018
- Groupes :
-
Administrateur
-
Forgeron
Confirmes tu que la souris est branchée en interne en USB ?
Dans ce cas, lsusb serait plus intéressant plutôt que lspcidrake.
GPE GPE Membre non connecté
-
- Voir le profil du membre GPE GPE
- Inscrit le : 05/06/2011
- Groupes :
Papoteur :
Bonjour,
Il y a ça aussi, mais ça semble être un clavier.
usbhid : MSI EPF USB|MSI EPF USB [Human Interface Device|No Subclass|None] (vendor:1770 device:ff00)
Tu confirmes, un clavier MSI sur USB ?
Il y a ça aussi, mais ça semble être un clavier.
usbhid : MSI EPF USB|MSI EPF USB [Human Interface Device|No Subclass|None] (vendor:1770 device:ff00)
Tu confirmes, un clavier MSI sur USB ?
non rien en usb MSI c'est le portable MSI GV72 7RD
Merci
Jybz Membre non connecté
-
- Voir le profil du membre Jybz
- Inscrit le : 10/10/2018
- Groupes :
-
Administrateur
-
Forgeron
Peux tu nous donner le résultat de lsusb ?
GPE GPE Membre non connecté
-
- Voir le profil du membre GPE GPE
- Inscrit le : 05/06/2011
- Groupes :
Jybz :
Bon. Ta souris n'est pas listée avec lspcidrake, même lorsqu'elle fonctionne.
Peux tu nous donner le résultat de lsusb ?
Peux tu nous donner le résultat de lsusb ?
commande effectuée en recovery mode
Caché :
[root@MSI ~]# lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 1770:ff00 MSI EPF USB MSI EPF USB
Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 004: ID 5986:0683 Acer, Inc BisonCam, NB Pro
Bus 001 Device 003: ID 8087:0aa7 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root@MSI ~]#
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 1770:ff00 MSI EPF USB MSI EPF USB
Bus 001 Device 005: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 004: ID 5986:0683 Acer, Inc BisonCam, NB Pro
Bus 001 Device 003: ID 8087:0aa7 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[root@MSI ~]#
Merci
GPE GPE Membre non connecté
-
- Voir le profil du membre GPE GPE
- Inscrit le : 05/06/2011
- Groupes :
alors pas de solution? bizarre quand même sa fonctionne en mode recovery mais en root, il y a t-il un moyen de démarrer ma session comme le recovery?
si non condamner à retourner sur MGA6 qui n'est plus suivie!
de plus je comprend pas que plus ça évolue moins ça fonctionne, et avec un pc d'un peut plus d'un an!
sa me rappelle mandriva ou quand on changer de version on été pas toujours gagnant!
Merci
nic80 Membre non connecté
-
- Voir le profil du membre nic80
- Inscrit le : 06/08/2018
- Groupes :
-
Modérateur
Si en recovery, startx se lance et que le touchpad fonctionne, peut être que le fichier /var/log/Xorg.0.log pourrait dire ce qu' il charge au démarrage ( et éventuellement le péripherique qui fait office de touchpad)?
Si cela fonctionne en root (recovery) peut être une règle udev qui ne donne pas les bons droits ?
Édité par nic80 Le 12/12/2019 à 19h16
GPE GPE Membre non connecté
-
- Voir le profil du membre GPE GPE
- Inscrit le : 05/06/2011
- Groupes :
nic80 :
Bonsoir,
Si en recovery, startx se lance et que le touchpad fonctionne, peut être que le fichier /var/log/Xorg.0.log pourrait dire ce qu' il charge au démarrage ( et éventuellement le péripherique qui fait office de touchpad)?
Si cela fonctionne en root (recovery) peut être une règle udev qui ne donne pas les bons droits ?
Si en recovery, startx se lance et que le touchpad fonctionne, peut être que le fichier /var/log/Xorg.0.log pourrait dire ce qu' il charge au démarrage ( et éventuellement le péripherique qui fait office de touchpad)?
Si cela fonctionne en root (recovery) peut être une règle udev qui ne donne pas les bons droits ?
Merci de ton intérêt, je m'explique pourquoi le démarrage en recovery!
dans le grub j'ai ajouter acpi=off si non pas d'écran graphique mais du coup pas de touchpad! alors la seul solution pour avoir les deux c'est le recovery, mais voilà je me retrouve en root!
je regarde le Xorg.0.log et je reposte
Merci
GPE GPE Membre non connecté
-
- Voir le profil du membre GPE GPE
- Inscrit le : 05/06/2011
- Groupes :
voila le Xorg.0.log
Caché :
[ 45.618]
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[ 45.634] Build Operating System: scwx861 4.19.53-mainline-rev1
[ 45.638] Current Operating System: Linux MSI 5.3.13-desktop-2.mga7 #1 SMP Mon Nov 25 20:30:40 UTC 2019 x86_64
[ 45.638] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.13-desktop-2.mga7 root=UUID=53e63e12-42c2-40f2-a50a-9f822fa41f4d ro failsafe
[ 45.645] Build Date: 25 October 2019 09:11:52AM
[ 45.647] Build ID: x11-server 1.20.5-1.mga7
[ 45.649] Current version of pixman: 0.38.4
[ 45.653] Before reporting problems, check https://bugs.mageia.org
to make sure that you have the latest version.
[ 45.653] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 45.660] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 12 20:58:08 2019
[ 45.662] (==) Using config file: "/etc/X11/xorg.conf"
[ 45.664] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 45.665] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 45.666] (==) No Layout section. Using the first Screen section.
[ 45.666] (==) No screen section available. Using defaults.
[ 45.666] (**) |-->Screen "Default Screen Section" (0)
[ 45.666] (**) | |-->Monitor "<default monitor>"
[ 45.666] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 45.666] (==) Automatically adding devices
[ 45.666] (==) Automatically enabling devices
[ 45.666] (==) Automatically adding GPU devices
[ 45.666] (==) Automatically binding GPU devices
[ 45.667] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 45.667] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 45.667] (**) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 45.667] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 45.667] (II) Loader magic: 0x616d40
[ 45.667] (II) Module ABI versions:
[ 45.667] X.Org ANSI C Emulation: 0.4
[ 45.667] X.Org Video Driver: 24.0
[ 45.667] X.Org XInput driver : 24.1
[ 45.667] X.Org Server Extension : 10.0
[ 45.667] (++) using VT number 1
[ 45.867] (EE) systemd-logind: failed to get session: PID 926 does not belong to any known session
[ 45.868] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 45.886] (--) PCI:*(0@0:2:0) 8086:591b:1462:11c9 rev 4, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 45.886] (--) PCI: (1@0:0:0) 10de:1c8d:1462:11c9 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 45.886] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 45.886] (II) LoadModule: "glx"
[ 45.887] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 45.897] (II) Module glx: vendor="X.Org Foundation"
[ 45.897] compiled for 1.20.5, module version = 1.0.0
[ 45.897] ABI class: X.Org Server Extension, version 10.0
[ 45.897] (==) Matched intel as autoconfigured driver 0
[ 45.897] (==) Matched modesetting as autoconfigured driver 1
[ 45.897] (==) Matched fbdev as autoconfigured driver 2
[ 45.897] (==) Matched vesa as autoconfigured driver 3
[ 45.897] (==) Assigned the driver to the xf86ConfigLayout
[ 45.897] (II) LoadModule: "intel"
[ 45.898] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 45.901] (II) Module intel: vendor="X.Org Foundation"
[ 45.901] compiled for 1.20.4, module version = 2.99.917
[ 45.901] Module class: X.Org Video Driver
[ 45.901] ABI class: X.Org Video Driver, version 24.0
[ 45.901] (II) LoadModule: "modesetting"
[ 45.901] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 45.902] (II) Module modesetting: vendor="X.Org Foundation"
[ 45.902] compiled for 1.20.5, module version = 1.20.5
[ 45.902] Module class: X.Org Video Driver
[ 45.902] ABI class: X.Org Video Driver, version 24.0
[ 45.902] (II) LoadModule: "fbdev"
[ 45.903] (WW) Warning, couldn't open module fbdev
[ 45.903] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 45.903] (II) LoadModule: "vesa"
[ 45.903] (WW) Warning, couldn't open module vesa
[ 45.903] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 45.903] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 45.903] (II) intel: Driver for Intel(R) HD Graphics
[ 45.903] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 45.903] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 45.903] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 45.904] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20190619
[ 45.918] (WW) Falling back to old probe method for modesetting
[ 45.919] (--) intel(0): gen9 engineering sample
[ 45.919] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[ 45.919] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 45.919] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 45.919] (==) intel(0): RGB weight 888
[ 45.919] (==) intel(0): Default visual is TrueColor
[ 45.920] (II) intel(0): Output eDP1 has no monitor section
[ 45.920] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 45.920] (II) intel(0): Enabled output eDP1
[ 45.921] (II) intel(0): Output DP1 has no monitor section
[ 45.921] (II) intel(0): Enabled output DP1
[ 45.921] (II) intel(0): Output HDMI1 has no monitor section
[ 45.921] (II) intel(0): Enabled output HDMI1
[ 45.921] (II) intel(0): Output HDMI2 has no monitor section
[ 45.921] (II) intel(0): Enabled output HDMI2
[ 45.921] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 45.922] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 45.922] (II) intel(0): Enabled output VIRTUAL1
[ 45.922] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 45.922] (==) intel(0): TearFree enabled
[ 45.922] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 45.922] (==) intel(0): DPI set to (96, 96)
[ 45.922] (II) Loading sub module "dri3"
[ 45.922] (II) LoadModule: "dri3"
[ 45.922] (II) Module "dri3" already built-in
[ 45.922] (II) Loading sub module "dri2"
[ 45.922] (II) LoadModule: "dri2"
[ 45.923] (II) Module "dri2" already built-in
[ 45.923] (II) Loading sub module "present"
[ 45.923] (II) LoadModule: "present"
[ 45.923] (II) Module "present" already built-in
[ 45.923] (II) UnloadModule: "modesetting"
[ 45.923] (II) Unloading modesetting
[ 45.925] (II) intel(0): SNA initialized with Kabylake (gen9) backend
[ 45.925] (==) intel(0): Backing store enabled
[ 45.925] (==) intel(0): Silken mouse enabled
[ 45.926] (II) intel(0): HW Cursor enabled
[ 45.927] (==) intel(0): DPMS enabled
[ 45.927] (==) intel(0): Display hotplug detection enabled
[ 45.927] (II) intel(0): [DRI2] Setup complete
[ 45.927] (II) intel(0): [DRI2] DRI driver: i965
[ 45.927] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 45.927] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 45.927] (II) intel(0): hardware support for Present enabled
[ 45.927] (II) Initializing extension Generic Event Extension
[ 45.927] (II) Initializing extension SHAPE
[ 45.927] (II) Initializing extension MIT-SHM
[ 45.927] (II) Initializing extension XInputExtension
[ 45.928] (II) Initializing extension XTEST
[ 45.928] (II) Initializing extension BIG-REQUESTS
[ 45.928] (II) Initializing extension SYNC
[ 45.928] (II) Initializing extension XKEYBOARD
[ 45.928] (II) Initializing extension XC-MISC
[ 45.928] (II) Initializing extension XFIXES
[ 45.928] (II) Initializing extension RENDER
[ 45.928] (II) Initializing extension RANDR
[ 45.928] (II) Initializing extension COMPOSITE
[ 45.928] (II) Initializing extension DAMAGE
[ 45.928] (II) Initializing extension MIT-SCREEN-SAVER
[ 45.928] (II) Initializing extension DOUBLE-BUFFER
[ 45.928] (II) Initializing extension RECORD
[ 45.928] (II) Initializing extension DPMS
[ 45.928] (II) Initializing extension Present
[ 45.928] (II) Initializing extension DRI3
[ 45.928] (II) Initializing extension X-Resource
[ 45.928] (II) Initializing extension XVideo
[ 45.928] (II) Initializing extension XVideo-MotionCompensation
[ 45.928] (II) Initializing extension GLX
[ 45.972] (II) AIGLX: Loaded and initialized i965
[ 45.972] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 45.972] (II) Initializing extension XFree86-VidModeExtension
[ 45.972] (II) Initializing extension XFree86-DGA
[ 45.972] (II) Initializing extension XFree86-DRI
[ 45.972] (II) Initializing extension DRI2
[ 45.978] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 45.982] (II) intel(0): Setting screen physical size to 508 x 285
[ 46.059] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 46.059] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 46.059] (**) Power Button: Applying InputClass "system-keyboard"
[ 46.059] (II) LoadModule: "libinput"
[ 46.060] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 46.065] (II) Module libinput: vendor="X.Org Foundation"
[ 46.065] compiled for 1.20.3, module version = 0.28.2
[ 46.065] Module class: X.Org XInput Driver
[ 46.065] ABI class: X.Org XInput driver, version 24.1
[ 46.065] (II) Using input driver 'libinput' for 'Power Button'
[ 46.065] (**) Power Button: always reports core events
[ 46.065] (**) Option "Device" "/dev/input/event4"
[ 46.065] (**) Option "_source" "server/udev"
[ 46.070] (II) event4 - Power Button: is tagged by udev as: Keyboard
[ 46.071] (II) event4 - Power Button: device is a keyboard
[ 46.071] (II) event4 - Power Button: device removed
[ 46.081] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 46.081] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 46.081] (**) Option "xkb_model" "pc105"
[ 46.081] (**) Option "xkb_layout" "fr"
[ 46.081] (**) Option "xkb_options" "compose:rwin"
[ 46.105] (II) event4 - Power Button: is tagged by udev as: Keyboard
[ 46.105] (II) event4 - Power Button: device is a keyboard
[ 46.106] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 46.106] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 46.106] (**) Video Bus: Applying InputClass "system-keyboard"
[ 46.106] (II) Using input driver 'libinput' for 'Video Bus'
[ 46.106] (**) Video Bus: always reports core events
[ 46.106] (**) Option "Device" "/dev/input/event5"
[ 46.106] (**) Option "_source" "server/udev"
[ 46.107] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 46.107] (II) event5 - Video Bus: device is a keyboard
[ 46.107] (II) event5 - Video Bus: device removed
[ 46.126] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5"
[ 46.126] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 46.126] (**) Option "xkb_model" "pc105"
[ 46.126] (**) Option "xkb_layout" "fr"
[ 46.126] (**) Option "xkb_options" "compose:rwin"
[ 46.128] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 46.128] (II) event5 - Video Bus: device is a keyboard
[ 46.129] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 46.129] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 46.129] (**) Video Bus: Applying InputClass "system-keyboard"
[ 46.129] (II) Using input driver 'libinput' for 'Video Bus'
[ 46.129] (**) Video Bus: always reports core events
[ 46.129] (**) Option "Device" "/dev/input/event6"
[ 46.129] (**) Option "_source" "server/udev"
[ 46.131] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 46.131] (II) event6 - Video Bus: device is a keyboard
[ 46.131] (II) event6 - Video Bus: device removed
[ 46.150] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input7/event6"
[ 46.150] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 46.150] (**) Option "xkb_model" "pc105"
[ 46.150] (**) Option "xkb_layout" "fr"
[ 46.150] (**) Option "xkb_options" "compose:rwin"
[ 46.153] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 46.153] (II) event6 - Video Bus: device is a keyboard
[ 46.154] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 46.154] (II) No input driver specified, ignoring this device.
[ 46.154] (II) This device may have been added with another device file.
[ 46.155] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 46.155] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 46.155] (**) Power Button: Applying InputClass "system-keyboard"
[ 46.155] (II) Using input driver 'libinput' for 'Power Button'
[ 46.155] (**) Power Button: always reports core events
[ 46.155] (**) Option "Device" "/dev/input/event3"
[ 46.155] (**) Option "_source" "server/udev"
[ 46.157] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 46.157] (II) event3 - Power Button: device is a keyboard
[ 46.157] (II) event3 - Power Button: device removed
[ 46.174] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 46.174] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 46.174] (**) Option "xkb_model" "pc105"
[ 46.174] (**) Option "xkb_layout" "fr"
[ 46.174] (**) Option "xkb_options" "compose:rwin"
[ 46.176] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 46.176] (II) event3 - Power Button: device is a keyboard
[ 46.177] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 46.177] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 46.177] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 46.177] (II) Using input driver 'libinput' for 'Sleep Button'
[ 46.177] (**) Sleep Button: always reports core events
[ 46.177] (**) Option "Device" "/dev/input/event2"
[ 46.177] (**) Option "_source" "server/udev"
[ 46.179] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 46.179] (II) event2 - Sleep Button: device is a keyboard
[ 46.179] (II) event2 - Sleep Button: device removed
[ 46.190] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[ 46.190] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 46.190] (**) Option "xkb_model" "pc105"
[ 46.190] (**) Option "xkb_layout" "fr"
[ 46.190] (**) Option "xkb_options" "compose:rwin"
[ 46.192] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 46.192] (II) event2 - Sleep Button: device is a keyboard
[ 46.194] (II) config/udev: Adding input device BisonCam, NB Pro: BisonCam, NB (/dev/input/event15)
[ 46.194] (**) BisonCam, NB Pro: BisonCam, NB : Applying InputClass "libinput keyboard catchall"
[ 46.194] (**) BisonCam, NB Pro: BisonCam, NB : Applying InputClass "system-keyboard"
[ 46.194] (II) Using input driver 'libinput' for 'BisonCam, NB Pro: BisonCam, NB '
[ 46.194] (**) BisonCam, NB Pro: BisonCam, NB : always reports core events
[ 46.194] (**) Option "Device" "/dev/input/event15"
[ 46.194] (**) Option "_source" "server/udev"
[ 46.197] (II) event15 - BisonCam, NB Pro: BisonCam, NB : is tagged by udev as: Keyboard
[ 46.197] (II) event15 - BisonCam, NB Pro: BisonCam, NB : device is a keyboard
[ 46.197] (II) event15 - BisonCam, NB Pro: BisonCam, NB : device removed
[ 46.214] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input17/event15"
[ 46.214] (II) XINPUT: Adding extended input device "BisonCam, NB Pro: BisonCam, NB " (type: KEYBOARD, id 11)
[ 46.214] (**) Option "xkb_model" "pc105"
[ 46.214] (**) Option "xkb_layout" "fr"
[ 46.214] (**) Option "xkb_options" "compose:rwin"
[ 46.217] (II) event15 - BisonCam, NB Pro: BisonCam, NB : is tagged by udev as: Keyboard
[ 46.217] (II) event15 - BisonCam, NB Pro: BisonCam, NB : device is a keyboard
[ 46.218] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[ 46.218] (II) No input driver specified, ignoring this device.
[ 46.218] (II) This device may have been added with another device file.
[ 46.219] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[ 46.219] (II) No input driver specified, ignoring this device.
[ 46.219] (II) This device may have been added with another device file.
[ 46.219] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 46.219] (II) No input driver specified, ignoring this device.
[ 46.219] (II) This device may have been added with another device file.
[ 46.220] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[ 46.220] (II) No input driver specified, ignoring this device.
[ 46.220] (II) This device may have been added with another device file.
[ 46.221] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12)
[ 46.221] (II) No input driver specified, ignoring this device.
[ 46.221] (II) This device may have been added with another device file.
[ 46.222] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event13)
[ 46.222] (II) No input driver specified, ignoring this device.
[ 46.222] (II) This device may have been added with another device file.
[ 46.223] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event14)
[ 46.223] (II) No input driver specified, ignoring this device.
[ 46.223] (II) This device may have been added with another device file.
[ 46.224] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 46.224] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 46.224] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 46.224] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 46.224] (**) AT Translated Set 2 keyboard: always reports core events
[ 46.224] (**) Option "Device" "/dev/input/event0"
[ 46.224] (**) Option "_source" "server/udev"
[ 46.226] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 46.226] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 46.228] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 46.239] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 46.239] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 46.239] (**) Option "xkb_model" "pc105"
[ 46.239] (**) Option "xkb_layout" "fr"
[ 46.239] (**) Option "xkb_options" "compose:rwin"
[ 46.241] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 46.242] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 46.244] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event16)
[ 46.244] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 46.244] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 46.244] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 46.244] (II) LoadModule: "synaptics"
[ 46.244] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 46.245] (II) Module synaptics: vendor="X.Org Foundation"
[ 46.245] compiled for 1.20.1, module version = 1.9.1
[ 46.245] Module class: X.Org XInput Driver
[ 46.245] ABI class: X.Org XInput driver, version 24.1
[ 46.245] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 46.245] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 46.245] (**) Option "Device" "/dev/input/event16"
[ 46.263] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1284 - 5656 (res 41)
[ 46.263] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1128 - 4728 (res 61)
[ 46.263] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 46.263] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 46.263] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 46.263] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 46.263] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 46.263] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 46.279] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event16"
[ 46.279] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 46.279] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 46.279] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 46.279] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 46.279] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 46.279] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 46.279] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 46.279] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 46.279] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 46.280] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 46.280] (II) No input driver specified, ignoring this device.
[ 46.280] (II) This device may have been added with another device file.
[ 46.281] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event7)
[ 46.282] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 46.282] (**) MSI WMI hotkeys: Applying InputClass "system-keyboard"
[ 46.282] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[ 46.282] (**) MSI WMI hotkeys: always reports core events
[ 46.282] (**) Option "Device" "/dev/input/event7"
[ 46.282] (**) Option "_source" "server/udev"
[ 46.283] (II) event7 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 46.283] (II) event7 - MSI WMI hotkeys: device is a keyboard
[ 46.283] (II) event7 - MSI WMI hotkeys: device removed
[ 46.303] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7"
[ 46.303] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 14)
[ 46.303] (**) Option "xkb_model" "pc105"
[ 46.303] (**) Option "xkb_layout" "fr"
[ 46.303] (**) Option "xkb_options" "compose:rwin"
[ 46.305] (II) event7 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 46.305] (II) event7 - MSI WMI hotkeys: device is a keyboard
[ 47.861] (II) intel(0): EDID vendor "CMN", prod id 5941
[ 47.862] (II) intel(0): Printing DDC gathered Modelines:
[ 47.862] (II) intel(0): Modeline "1920x1080"x0.0 140.00 1920 1968 2000 2102 1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)
X.Org X Server 1.20.5
X Protocol Version 11, Revision 0
[ 45.634] Build Operating System: scwx861 4.19.53-mainline-rev1
[ 45.638] Current Operating System: Linux MSI 5.3.13-desktop-2.mga7 #1 SMP Mon Nov 25 20:30:40 UTC 2019 x86_64
[ 45.638] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.13-desktop-2.mga7 root=UUID=53e63e12-42c2-40f2-a50a-9f822fa41f4d ro failsafe
[ 45.645] Build Date: 25 October 2019 09:11:52AM
[ 45.647] Build ID: x11-server 1.20.5-1.mga7
[ 45.649] Current version of pixman: 0.38.4
[ 45.653] Before reporting problems, check https://bugs.mageia.org
to make sure that you have the latest version.
[ 45.653] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 45.660] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Dec 12 20:58:08 2019
[ 45.662] (==) Using config file: "/etc/X11/xorg.conf"
[ 45.664] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 45.665] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 45.666] (==) No Layout section. Using the first Screen section.
[ 45.666] (==) No screen section available. Using defaults.
[ 45.666] (**) |-->Screen "Default Screen Section" (0)
[ 45.666] (**) | |-->Monitor "<default monitor>"
[ 45.666] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 45.666] (==) Automatically adding devices
[ 45.666] (==) Automatically enabling devices
[ 45.666] (==) Automatically adding GPU devices
[ 45.666] (==) Automatically binding GPU devices
[ 45.667] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 45.667] (==) FontPath set to:
catalogue:/etc/X11/fontpath.d,
built-ins
[ 45.667] (**) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 45.667] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 45.667] (II) Loader magic: 0x616d40
[ 45.667] (II) Module ABI versions:
[ 45.667] X.Org ANSI C Emulation: 0.4
[ 45.667] X.Org Video Driver: 24.0
[ 45.667] X.Org XInput driver : 24.1
[ 45.667] X.Org Server Extension : 10.0
[ 45.667] (++) using VT number 1
[ 45.867] (EE) systemd-logind: failed to get session: PID 926 does not belong to any known session
[ 45.868] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 45.886] (--) PCI:*(0@0:2:0) 8086:591b:1462:11c9 rev 4, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 45.886] (--) PCI: (1@0:0:0) 10de:1c8d:1462:11c9 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 45.886] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 45.886] (II) LoadModule: "glx"
[ 45.887] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 45.897] (II) Module glx: vendor="X.Org Foundation"
[ 45.897] compiled for 1.20.5, module version = 1.0.0
[ 45.897] ABI class: X.Org Server Extension, version 10.0
[ 45.897] (==) Matched intel as autoconfigured driver 0
[ 45.897] (==) Matched modesetting as autoconfigured driver 1
[ 45.897] (==) Matched fbdev as autoconfigured driver 2
[ 45.897] (==) Matched vesa as autoconfigured driver 3
[ 45.897] (==) Assigned the driver to the xf86ConfigLayout
[ 45.897] (II) LoadModule: "intel"
[ 45.898] (II) Loading /usr/lib64/xorg/modules/drivers/intel_drv.so
[ 45.901] (II) Module intel: vendor="X.Org Foundation"
[ 45.901] compiled for 1.20.4, module version = 2.99.917
[ 45.901] Module class: X.Org Video Driver
[ 45.901] ABI class: X.Org Video Driver, version 24.0
[ 45.901] (II) LoadModule: "modesetting"
[ 45.901] (II) Loading /usr/lib64/xorg/modules/drivers/modesetting_drv.so
[ 45.902] (II) Module modesetting: vendor="X.Org Foundation"
[ 45.902] compiled for 1.20.5, module version = 1.20.5
[ 45.902] Module class: X.Org Video Driver
[ 45.902] ABI class: X.Org Video Driver, version 24.0
[ 45.902] (II) LoadModule: "fbdev"
[ 45.903] (WW) Warning, couldn't open module fbdev
[ 45.903] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 45.903] (II) LoadModule: "vesa"
[ 45.903] (WW) Warning, couldn't open module vesa
[ 45.903] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 45.903] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 45.903] (II) intel: Driver for Intel(R) HD Graphics
[ 45.903] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 45.903] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 45.903] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 45.904] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20190619
[ 45.918] (WW) Falling back to old probe method for modesetting
[ 45.919] (--) intel(0): gen9 engineering sample
[ 45.919] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 4 threads
[ 45.919] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 45.919] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 45.919] (==) intel(0): RGB weight 888
[ 45.919] (==) intel(0): Default visual is TrueColor
[ 45.920] (II) intel(0): Output eDP1 has no monitor section
[ 45.920] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 45.920] (II) intel(0): Enabled output eDP1
[ 45.921] (II) intel(0): Output DP1 has no monitor section
[ 45.921] (II) intel(0): Enabled output DP1
[ 45.921] (II) intel(0): Output HDMI1 has no monitor section
[ 45.921] (II) intel(0): Enabled output HDMI1
[ 45.921] (II) intel(0): Output HDMI2 has no monitor section
[ 45.921] (II) intel(0): Enabled output HDMI2
[ 45.921] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 45.922] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 45.922] (II) intel(0): Enabled output VIRTUAL1
[ 45.922] (--) intel(0): Output eDP1 using initial mode 1920x1080 on pipe 0
[ 45.922] (==) intel(0): TearFree enabled
[ 45.922] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 45.922] (==) intel(0): DPI set to (96, 96)
[ 45.922] (II) Loading sub module "dri3"
[ 45.922] (II) LoadModule: "dri3"
[ 45.922] (II) Module "dri3" already built-in
[ 45.922] (II) Loading sub module "dri2"
[ 45.922] (II) LoadModule: "dri2"
[ 45.923] (II) Module "dri2" already built-in
[ 45.923] (II) Loading sub module "present"
[ 45.923] (II) LoadModule: "present"
[ 45.923] (II) Module "present" already built-in
[ 45.923] (II) UnloadModule: "modesetting"
[ 45.923] (II) Unloading modesetting
[ 45.925] (II) intel(0): SNA initialized with Kabylake (gen9) backend
[ 45.925] (==) intel(0): Backing store enabled
[ 45.925] (==) intel(0): Silken mouse enabled
[ 45.926] (II) intel(0): HW Cursor enabled
[ 45.927] (==) intel(0): DPMS enabled
[ 45.927] (==) intel(0): Display hotplug detection enabled
[ 45.927] (II) intel(0): [DRI2] Setup complete
[ 45.927] (II) intel(0): [DRI2] DRI driver: i965
[ 45.927] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 45.927] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 45.927] (II) intel(0): hardware support for Present enabled
[ 45.927] (II) Initializing extension Generic Event Extension
[ 45.927] (II) Initializing extension SHAPE
[ 45.927] (II) Initializing extension MIT-SHM
[ 45.927] (II) Initializing extension XInputExtension
[ 45.928] (II) Initializing extension XTEST
[ 45.928] (II) Initializing extension BIG-REQUESTS
[ 45.928] (II) Initializing extension SYNC
[ 45.928] (II) Initializing extension XKEYBOARD
[ 45.928] (II) Initializing extension XC-MISC
[ 45.928] (II) Initializing extension XFIXES
[ 45.928] (II) Initializing extension RENDER
[ 45.928] (II) Initializing extension RANDR
[ 45.928] (II) Initializing extension COMPOSITE
[ 45.928] (II) Initializing extension DAMAGE
[ 45.928] (II) Initializing extension MIT-SCREEN-SAVER
[ 45.928] (II) Initializing extension DOUBLE-BUFFER
[ 45.928] (II) Initializing extension RECORD
[ 45.928] (II) Initializing extension DPMS
[ 45.928] (II) Initializing extension Present
[ 45.928] (II) Initializing extension DRI3
[ 45.928] (II) Initializing extension X-Resource
[ 45.928] (II) Initializing extension XVideo
[ 45.928] (II) Initializing extension XVideo-MotionCompensation
[ 45.928] (II) Initializing extension GLX
[ 45.972] (II) AIGLX: Loaded and initialized i965
[ 45.972] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 45.972] (II) Initializing extension XFree86-VidModeExtension
[ 45.972] (II) Initializing extension XFree86-DGA
[ 45.972] (II) Initializing extension XFree86-DRI
[ 45.972] (II) Initializing extension DRI2
[ 45.978] (II) intel(0): switch to mode 1920x1080@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 45.982] (II) intel(0): Setting screen physical size to 508 x 285
[ 46.059] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 46.059] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 46.059] (**) Power Button: Applying InputClass "system-keyboard"
[ 46.059] (II) LoadModule: "libinput"
[ 46.060] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[ 46.065] (II) Module libinput: vendor="X.Org Foundation"
[ 46.065] compiled for 1.20.3, module version = 0.28.2
[ 46.065] Module class: X.Org XInput Driver
[ 46.065] ABI class: X.Org XInput driver, version 24.1
[ 46.065] (II) Using input driver 'libinput' for 'Power Button'
[ 46.065] (**) Power Button: always reports core events
[ 46.065] (**) Option "Device" "/dev/input/event4"
[ 46.065] (**) Option "_source" "server/udev"
[ 46.070] (II) event4 - Power Button: is tagged by udev as: Keyboard
[ 46.071] (II) event4 - Power Button: device is a keyboard
[ 46.071] (II) event4 - Power Button: device removed
[ 46.081] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[ 46.081] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 46.081] (**) Option "xkb_model" "pc105"
[ 46.081] (**) Option "xkb_layout" "fr"
[ 46.081] (**) Option "xkb_options" "compose:rwin"
[ 46.105] (II) event4 - Power Button: is tagged by udev as: Keyboard
[ 46.105] (II) event4 - Power Button: device is a keyboard
[ 46.106] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 46.106] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 46.106] (**) Video Bus: Applying InputClass "system-keyboard"
[ 46.106] (II) Using input driver 'libinput' for 'Video Bus'
[ 46.106] (**) Video Bus: always reports core events
[ 46.106] (**) Option "Device" "/dev/input/event5"
[ 46.106] (**) Option "_source" "server/udev"
[ 46.107] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 46.107] (II) event5 - Video Bus: device is a keyboard
[ 46.107] (II) event5 - Video Bus: device removed
[ 46.126] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5"
[ 46.126] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 46.126] (**) Option "xkb_model" "pc105"
[ 46.126] (**) Option "xkb_layout" "fr"
[ 46.126] (**) Option "xkb_options" "compose:rwin"
[ 46.128] (II) event5 - Video Bus: is tagged by udev as: Keyboard
[ 46.128] (II) event5 - Video Bus: device is a keyboard
[ 46.129] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 46.129] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 46.129] (**) Video Bus: Applying InputClass "system-keyboard"
[ 46.129] (II) Using input driver 'libinput' for 'Video Bus'
[ 46.129] (**) Video Bus: always reports core events
[ 46.129] (**) Option "Device" "/dev/input/event6"
[ 46.129] (**) Option "_source" "server/udev"
[ 46.131] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 46.131] (II) event6 - Video Bus: device is a keyboard
[ 46.131] (II) event6 - Video Bus: device removed
[ 46.150] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:12/LNXVIDEO:01/input/input7/event6"
[ 46.150] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 46.150] (**) Option "xkb_model" "pc105"
[ 46.150] (**) Option "xkb_layout" "fr"
[ 46.150] (**) Option "xkb_options" "compose:rwin"
[ 46.153] (II) event6 - Video Bus: is tagged by udev as: Keyboard
[ 46.153] (II) event6 - Video Bus: device is a keyboard
[ 46.154] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 46.154] (II) No input driver specified, ignoring this device.
[ 46.154] (II) This device may have been added with another device file.
[ 46.155] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 46.155] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 46.155] (**) Power Button: Applying InputClass "system-keyboard"
[ 46.155] (II) Using input driver 'libinput' for 'Power Button'
[ 46.155] (**) Power Button: always reports core events
[ 46.155] (**) Option "Device" "/dev/input/event3"
[ 46.155] (**) Option "_source" "server/udev"
[ 46.157] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 46.157] (II) event3 - Power Button: device is a keyboard
[ 46.157] (II) event3 - Power Button: device removed
[ 46.174] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[ 46.174] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 46.174] (**) Option "xkb_model" "pc105"
[ 46.174] (**) Option "xkb_layout" "fr"
[ 46.174] (**) Option "xkb_options" "compose:rwin"
[ 46.176] (II) event3 - Power Button: is tagged by udev as: Keyboard
[ 46.176] (II) event3 - Power Button: device is a keyboard
[ 46.177] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 46.177] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 46.177] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 46.177] (II) Using input driver 'libinput' for 'Sleep Button'
[ 46.177] (**) Sleep Button: always reports core events
[ 46.177] (**) Option "Device" "/dev/input/event2"
[ 46.177] (**) Option "_source" "server/udev"
[ 46.179] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 46.179] (II) event2 - Sleep Button: device is a keyboard
[ 46.179] (II) event2 - Sleep Button: device removed
[ 46.190] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[ 46.190] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 46.190] (**) Option "xkb_model" "pc105"
[ 46.190] (**) Option "xkb_layout" "fr"
[ 46.190] (**) Option "xkb_options" "compose:rwin"
[ 46.192] (II) event2 - Sleep Button: is tagged by udev as: Keyboard
[ 46.192] (II) event2 - Sleep Button: device is a keyboard
[ 46.194] (II) config/udev: Adding input device BisonCam, NB Pro: BisonCam, NB (/dev/input/event15)
[ 46.194] (**) BisonCam, NB Pro: BisonCam, NB : Applying InputClass "libinput keyboard catchall"
[ 46.194] (**) BisonCam, NB Pro: BisonCam, NB : Applying InputClass "system-keyboard"
[ 46.194] (II) Using input driver 'libinput' for 'BisonCam, NB Pro: BisonCam, NB '
[ 46.194] (**) BisonCam, NB Pro: BisonCam, NB : always reports core events
[ 46.194] (**) Option "Device" "/dev/input/event15"
[ 46.194] (**) Option "_source" "server/udev"
[ 46.197] (II) event15 - BisonCam, NB Pro: BisonCam, NB : is tagged by udev as: Keyboard
[ 46.197] (II) event15 - BisonCam, NB Pro: BisonCam, NB : device is a keyboard
[ 46.197] (II) event15 - BisonCam, NB Pro: BisonCam, NB : device removed
[ 46.214] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input17/event15"
[ 46.214] (II) XINPUT: Adding extended input device "BisonCam, NB Pro: BisonCam, NB " (type: KEYBOARD, id 11)
[ 46.214] (**) Option "xkb_model" "pc105"
[ 46.214] (**) Option "xkb_layout" "fr"
[ 46.214] (**) Option "xkb_options" "compose:rwin"
[ 46.217] (II) event15 - BisonCam, NB Pro: BisonCam, NB : is tagged by udev as: Keyboard
[ 46.217] (II) event15 - BisonCam, NB Pro: BisonCam, NB : device is a keyboard
[ 46.218] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[ 46.218] (II) No input driver specified, ignoring this device.
[ 46.218] (II) This device may have been added with another device file.
[ 46.219] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event9)
[ 46.219] (II) No input driver specified, ignoring this device.
[ 46.219] (II) This device may have been added with another device file.
[ 46.219] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event10)
[ 46.219] (II) No input driver specified, ignoring this device.
[ 46.219] (II) This device may have been added with another device file.
[ 46.220] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event11)
[ 46.220] (II) No input driver specified, ignoring this device.
[ 46.220] (II) This device may have been added with another device file.
[ 46.221] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event12)
[ 46.221] (II) No input driver specified, ignoring this device.
[ 46.221] (II) This device may have been added with another device file.
[ 46.222] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event13)
[ 46.222] (II) No input driver specified, ignoring this device.
[ 46.222] (II) This device may have been added with another device file.
[ 46.223] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event14)
[ 46.223] (II) No input driver specified, ignoring this device.
[ 46.223] (II) This device may have been added with another device file.
[ 46.224] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 46.224] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 46.224] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 46.224] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 46.224] (**) AT Translated Set 2 keyboard: always reports core events
[ 46.224] (**) Option "Device" "/dev/input/event0"
[ 46.224] (**) Option "_source" "server/udev"
[ 46.226] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 46.226] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 46.228] (II) event0 - AT Translated Set 2 keyboard: device removed
[ 46.239] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 46.239] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 46.239] (**) Option "xkb_model" "pc105"
[ 46.239] (**) Option "xkb_layout" "fr"
[ 46.239] (**) Option "xkb_options" "compose:rwin"
[ 46.241] (II) event0 - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[ 46.242] (II) event0 - AT Translated Set 2 keyboard: device is a keyboard
[ 46.244] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event16)
[ 46.244] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[ 46.244] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 46.244] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 46.244] (II) LoadModule: "synaptics"
[ 46.244] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 46.245] (II) Module synaptics: vendor="X.Org Foundation"
[ 46.245] compiled for 1.20.1, module version = 1.9.1
[ 46.245] Module class: X.Org XInput Driver
[ 46.245] ABI class: X.Org XInput driver, version 24.1
[ 46.245] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 46.245] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 46.245] (**) Option "Device" "/dev/input/event16"
[ 46.263] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1284 - 5656 (res 41)
[ 46.263] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1128 - 4728 (res 61)
[ 46.263] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 46.263] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 46.263] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 46.263] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 46.263] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 46.263] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 46.279] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event16"
[ 46.279] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 46.279] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 46.279] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 46.279] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[ 46.279] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 46.279] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 46.279] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 46.279] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 46.279] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 46.280] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 46.280] (II) No input driver specified, ignoring this device.
[ 46.280] (II) This device may have been added with another device file.
[ 46.281] (II) config/udev: Adding input device MSI WMI hotkeys (/dev/input/event7)
[ 46.282] (**) MSI WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 46.282] (**) MSI WMI hotkeys: Applying InputClass "system-keyboard"
[ 46.282] (II) Using input driver 'libinput' for 'MSI WMI hotkeys'
[ 46.282] (**) MSI WMI hotkeys: always reports core events
[ 46.282] (**) Option "Device" "/dev/input/event7"
[ 46.282] (**) Option "_source" "server/udev"
[ 46.283] (II) event7 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 46.283] (II) event7 - MSI WMI hotkeys: device is a keyboard
[ 46.283] (II) event7 - MSI WMI hotkeys: device removed
[ 46.303] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7"
[ 46.303] (II) XINPUT: Adding extended input device "MSI WMI hotkeys" (type: KEYBOARD, id 14)
[ 46.303] (**) Option "xkb_model" "pc105"
[ 46.303] (**) Option "xkb_layout" "fr"
[ 46.303] (**) Option "xkb_options" "compose:rwin"
[ 46.305] (II) event7 - MSI WMI hotkeys: is tagged by udev as: Keyboard
[ 46.305] (II) event7 - MSI WMI hotkeys: device is a keyboard
[ 47.861] (II) intel(0): EDID vendor "CMN", prod id 5941
[ 47.862] (II) intel(0): Printing DDC gathered Modelines:
[ 47.862] (II) intel(0): Modeline "1920x1080"x0.0 140.00 1920 1968 2000 2102 1080 1083 1088 1110 -hsync -vsync (66.6 kHz eP)
Merci
Papoteur Membre non connecté
-
- Voir le profil du membre Papoteur
- Inscrit le : 03/10/2011
- Groupes :
-
Modérateur
-
Équipe Mageia
-
Administrateur
-
Forgeron
init 3
puis connecter l'utilisateur et enfin lancer startx.
Le log indique qu'un touchpad Synaptics est utilisé et reconnu.
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie