Connexion

Besoin d'aide ? Une question ? Un avis ? Rejoignez nous sur notre salon IRC pour clavarder

Forum

Environnements Graphiques » KDE Plasma [Réglé] Dernière mise à jour : écran tout noir sous plasma

alouali Membre non connecté

Rang

Avatar

Inscrit le : 15/02/2014 à 09h56

Localisation : Lyon, France

Messages: 36

Le 13/01/2018 à 09h00
Bonjour,

depuis hier et la dernière mise à jour, l'écran est tout noir sous plasma, quelque soit l'utilisateur, et même en désactivant le compositeur.

Heureusement j'ai un bureau de dépannage Xfce.

Mon processeur est un Core i3-4330 et j'utilise sa carte graphique intégrée, donc le pilote libre intel.

Y-a-t'il une solution ? Faut-il patienter jsuqu'à la prochaine mise à jour ?

Merci !
Site web    
vouf Membre non connecté

Rang

Avatar

Webmaster Administrateur

Inscrit le : 16/08/2008 à 08h27

Localisation : Gironde

Messages: 2953

Le 13/01/2018 à 09h49
Bonjour

a) Peut être une mise à jour imparfaite liée à un miroir qui ne serait pas à jour. Supprimer les dépôts actuels et les remplacer par des nouveaux.

Suppression des dépôts actuels.
Code BASH :
urpmi.removemedia -a


Ajout du dépôt free. Attention, le lien ci dessous est pour mageia 6 version 64 bits
Code BASH :
urpmi.addmedia --distrib http://ftp.free.fr/mirrors/mageia.org/distrib/6/x86_64


Forcer la mise à jour de la distrib
Code BASH :
urpmi --auto-update




b) Un problème d'espace disque ? Vérifie que les partitions / ou /home ou /tmp ne sont pas pleines..
Code BASH :
df -h


Mageia 7 64 bits Plasma 5- Asus B150 Pro Gaming-Intel Core i7 6700-16 Go Hyper X Fury DDR4-2133 Mhz-Asus Strix GTX Nvidia 1060 - Go-M2 Samsung Evo 970 1Tb-SSD 512 Gb Samsung Evo 960 -Raspberry PI2
   
alouali Membre non connecté

Rang

Avatar

Inscrit le : 15/02/2014 à 09h56

Localisation : Lyon, France

Messages: 36

Le 13/01/2018 à 09h55
Bonjour,

merci pour ta réponse, hélas je viens d'essayer les 3 commandes, ça ne change rien.

J'ai toujours fais mes mise à jour avec urpmi --auto-update et il n'y avais pas d'erreur signalée non plus la dernière fois.

Pour df, il me reste plus de 100Go de libre sur / et /home, et 3.9Go sur /tmp (tmpfs)

D'autant qu'en dehors de plasma5, xfce fonctionne. Edité par alouali Le 13/01/2018 à 10h01
Site web    
vouf Membre non connecté

Rang

Avatar

Webmaster Administrateur

Inscrit le : 16/08/2008 à 08h27

Localisation : Gironde

Messages: 2953

Le 13/01/2018 à 10h07
Bonjour

Tu peux par hasard nous donner le résultat de :
Code BASH :
 
journalctl -b -p err


Sinon, depuis ta session xfce, je te proposerai bien de réinitialiser ta session plasma

Code BASH :
rm -rf .config/plasma*


Mageia 7 64 bits Plasma 5- Asus B150 Pro Gaming-Intel Core i7 6700-16 Go Hyper X Fury DDR4-2133 Mhz-Asus Strix GTX Nvidia 1060 - Go-M2 Samsung Evo 970 1Tb-SSD 512 Gb Samsung Evo 960 -Raspberry PI2
   
alouali Membre non connecté

Rang

Avatar

Inscrit le : 15/02/2014 à 09h56

Localisation : Lyon, France

Messages: 36

Le 13/01/2018 à 10h58
Bonjour,

voici le résultat :
Code BASH :
 
journalctl -b -p err
-- Logs begin at mer. 2017-08-16 19:04:04 CEST, end at sam. 2018-01-13 10:55:22 
janv. 13 08:44:51 localhost kernel: xt_addrtype: ipv6 does not support BROADCAST
janv. 13 09:19:02 localhost sSMTP[23264]: Unable to locate mail
janv. 13 09:19:02 localhost sSMTP[23264]: Cannot open mail:25
janv. 13 09:19:02 localhost sSMTP[23322]: Unable to locate mail
janv. 13 09:19:02 localhost sSMTP[23322]: Cannot open mail:25
janv. 13 09:19:02 localhost sSMTP[23359]: Unable to locate mail
janv. 13 09:19:02 localhost sSMTP[23359]: Cannot open mail:25
janv. 13 09:19:02 localhost anacron[13143]: Tried to mail output of job `cron.da
 


Je ne souhaite pas détruire ma config plasma (j'ai des notes que je n'ai pas eu le temps de sauvegarder), par contre j'ai créé un nouvel utilisateur test vide, et l'écran est désespérément noir
Site web    
vouf Membre non connecté

Rang

Avatar

Webmaster Administrateur

Inscrit le : 16/08/2008 à 08h27

Localisation : Gironde

Messages: 2953

Le 13/01/2018 à 11h39
Bonjour

Pas trop d'idées. Si tu bascule sur le précédent kernel en le sélectionnant au démarrage, rencontre tu le même problème ? Sinon, as tu un seul moniteur ou plusieurs moniteurs ?


Mageia 7 64 bits Plasma 5- Asus B150 Pro Gaming-Intel Core i7 6700-16 Go Hyper X Fury DDR4-2133 Mhz-Asus Strix GTX Nvidia 1060 - Go-M2 Samsung Evo 970 1Tb-SSD 512 Gb Samsung Evo 960 -Raspberry PI2
   
alouali Membre non connecté

Rang

Avatar

Inscrit le : 15/02/2014 à 09h56

Localisation : Lyon, France

Messages: 36

Le 13/01/2018 à 12h12
Bonjour,

oui j'ai redémarré avec les anciens kernels, ça n'a rien changé. Je pense que c'est les dernières mises à jour Qt / KDE.

J'ai un seul moniteur.
Site web    
vouf Membre non connecté

Rang

Avatar

Webmaster Administrateur

Inscrit le : 16/08/2008 à 08h27

Localisation : Gironde

Messages: 2953

Le 13/01/2018 à 16h12
Bonjour


Peux tu nous communiquer les éléments de carte graphique :

Code BASH :
lspcidrake -v | grep Card


Le contenu du fichier suivant après que le problème se soit produit :

Code BASH :
cat /var/log/Xorg.0.log


Le contenu de ton fichier xorg.conf :

Code BASH :
cat /etc/X11/xorg.conf


Mageia 7 64 bits Plasma 5- Asus B150 Pro Gaming-Intel Core i7 6700-16 Go Hyper X Fury DDR4-2133 Mhz-Asus Strix GTX Nvidia 1060 - Go-M2 Samsung Evo 970 1Tb-SSD 512 Gb Samsung Evo 960 -Raspberry PI2
   
alouali Membre non connecté

Rang

Avatar

Inscrit le : 15/02/2014 à 09h56

Localisation : Lyon, France

Messages: 36

Le 13/01/2018 à 18h12
Re-Bonjour,

alors voici les informations demandées :

Code BASH :
 
lspcidrake -v | grep Card
Card:Intel 810 and later: Intel Corporation|Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [DISPLAY_VGA] (vendor:8086 device:0412 subv:1458 subd:d000) (rev: 06)
 


Code BASH :
 
cat /var/log/Xorg.0.log
[    11.619] (--) Log file renamed from "/var/log/Xorg.pid-1495.log" to "/var/log/Xorg.0.log"
[    11.619] 
X.Org X Server 1.19.5
Release Date: 2017-10-12
[    11.619] X Protocol Version 11, Revision 0
[    11.619] Build Operating System: ecosse 4.4.88-server-1.mga5 
[    11.619] Current Operating System: Linux localhost 4.14.13-desktop-1.mga6 #1 SMP Wed Jan 10 12:48:53 UTC 2018 x86_64
[    11.619] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.14.13-desktop-1.mga6 root=UUID=7fd96cd9-d4a7-4732-8188-a33985b9b465 ro splash quiet noiswmd audit=0
[    11.619] Build Date: 13 October 2017  04:36:29PM
[    11.619] Build ID: x11-server 1.19.5-1.1.mga6 
[    11.619] Current version of pixman: 0.34.0
[    11.619]     Before reporting problems, check https://bugs.mageia.org
    to make sure that you have the latest version.
[    11.619] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    11.620] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 13 18:03:02 2018
[    11.620] (==) Using config file: "/etc/X11/xorg.conf"
[    11.620] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    11.620] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    11.621] (==) ServerLayout "layout1"
[    11.621] (**) |-->Screen "screen1" (0)
[    11.621] (**) |   |-->Monitor "monitor1"
[    11.621] (**) |   |-->Device "device1"
[    11.621] (**) Option "DontZap" "False"
[    11.621] (**) Option "AllowMouseOpenFail"
[    11.621] (==) Automatically adding devices
[    11.621] (==) Automatically enabling devices
[    11.621] (==) Automatically adding GPU devices
[    11.621] (==) Automatically binding GPU devices
[    11.621] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    11.621] (==) FontPath set to:
    catalogue:/etc/X11/fontpath.d,
    built-ins
[    11.621] (**) ModulePath set to "/usr/lib64/xorg/extra-modules,/usr/lib64/xorg/modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[    11.622] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
[    11.622] (II) Loader magic: 0x80ed80
[    11.622] (II) Module ABI versions:
[    11.622]     X.Org ANSI C Emulation: 0.4
[    11.622]     X.Org Video Driver: 23.0
[    11.622]     X.Org XInput driver : 24.1
[    11.622]     X.Org Server Extension : 10.0
[    11.622] (++) using VT number 1
 
[    11.622] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    11.623] (II) xfree86: Adding drm device (/dev/dri/card0)
[    11.632] (--) PCI:*(0:0:2:0) 8086:0412:1458:d000 rev 6, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    11.632] (II) Open ACPI successful (/var/run/acpid.socket)
[    11.632] (II) "glx" will be loaded by default.
[    11.632] (II) LoadModule: "v4l"
[    11.633] (II) Loading /usr/lib64/xorg/modules/drivers/v4l_drv.so
[    11.633] (II) Module v4l: vendor="X.Org Foundation"
[    11.633]     compiled for 1.19.2, module version = 0.1.1
[    11.633]     ABI class: X.Org Video Driver, version 23.0
[    11.633] (II) LoadModule: "glx"
[    11.634] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    11.642] (II) Module glx: vendor="X.Org Foundation"
[    11.642]     compiled for 1.19.5, module version = 1.0.0
[    11.642]     ABI class: X.Org Server Extension, version 10.0
[    11.642] (II) LoadModule: "intel"
[    11.643] (II) Loading /usr/lib64/xorg/modules/drivers/intel-common/intel_drv.so
[    11.645] (II) Module intel: vendor="X.Org Foundation"
[    11.645]     compiled for 1.19.5, module version = 2.99.917
[    11.645]     Module class: X.Org Video Driver
[    11.645]     ABI class: X.Org Video Driver, version 23.0
[    11.645] (II) v4l driver for Video4Linux overlay mode (V4L2)
[    11.645] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
    i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
    915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
    Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
    GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    11.645] (II) intel: Driver for Intel(R) HD Graphics
[    11.645] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    11.645] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    11.645] (WW) Falling back to old probe method for v4l
[    11.645] (II) v4l: Initiating device probe
[    11.646] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20170818
[    11.658] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[    11.658] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[    11.658] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[    11.658] (==) intel(0): RGB weight 888
[    11.658] (==) intel(0): Default visual is TrueColor
[    11.659] (II) intel(0): Output VGA1 using monitor section monitor1
[    11.659] (II) intel(0): Enabled output VGA1
[    11.659] (II) intel(0): Output HDMI1 has no monitor section
[    11.659] (II) intel(0): Enabled output HDMI1
[    11.659] (II) intel(0): Output HDMI2 has no monitor section
[    11.659] (II) intel(0): Enabled output HDMI2
[    11.659] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    11.659] (II) intel(0): Output VIRTUAL1 has no monitor section
[    11.659] (II) intel(0): Enabled output VIRTUAL1
[    11.659] (--) intel(0): Output HDMI1 using initial mode 1280x1024 on pipe 0
[    11.659] (==) intel(0): TearFree disabled
[    11.659] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    11.659] (==) intel(0): DPI set to (96, 96)
[    11.659] (II) Loading sub module "dri3"
[    11.659] (II) LoadModule: "dri3"
[    11.659] (II) Module "dri3" already built-in
[    11.659] (II) Loading sub module "dri2"
[    11.659] (II) LoadModule: "dri2"
[    11.659] (II) Module "dri2" already built-in
[    11.659] (II) Loading sub module "present"
[    11.659] (II) LoadModule: "present"
[    11.659] (II) Module "present" already built-in
[    11.659] (==) Depth 24 pixmap format is 32 bpp
[    11.661] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[    11.661] (==) intel(0): Backing store enabled
[    11.661] (==) intel(0): Silken mouse enabled
[    11.662] (II) intel(0): HW Cursor enabled
[    11.662] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    11.662] (**) intel(0): DPMS enabled
[    11.662] (==) intel(0): Display hotplug detection enabled
[    11.662] (II) v4l: init done, 0 device(s) found
[    11.662] (II) intel(0): [DRI2] Setup complete
[    11.662] (II) intel(0): [DRI2]   DRI driver: i965
[    11.662] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    11.662] (II) intel(0): direct rendering: DRI2 enabled
[    11.662] (II) intel(0): hardware support for Present enabled
[    11.662] (--) RandR disabled
[    11.681] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    11.681] (II) AIGLX: enabled GLX_ARB_create_context
[    11.681] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    11.681] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    11.681] (II) AIGLX: enabled GLX_INTEL_swap_event
[    11.681] (II) AIGLX: enabled GLX_SGI_swap_control
[    11.681] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    11.681] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    11.681] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    11.681] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    11.681] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    11.681] (II) AIGLX: Loaded and initialized i965
[    11.681] (II) GLX: Initialized DRI2 GL provider for screen 0
[    11.683] (II) intel(0): switch to mode 1280x1024@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
[    11.697] (II) intel(0): Setting screen physical size to 338 x 270
[    11.734] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    11.734] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    11.734] (**) Power Button: Applying InputClass "system-keyboard"
[    11.734] (II) LoadModule: "libinput"
[    11.735] (II) Loading /usr/lib64/xorg/modules/input/libinput_drv.so
[    11.737] (II) Module libinput: vendor="X.Org Foundation"
[    11.737]     compiled for 1.19.3, module version = 0.25.1
[    11.737]     Module class: X.Org XInput Driver
[    11.737]     ABI class: X.Org XInput driver, version 24.1
[    11.737] (II) Using input driver 'libinput' for 'Power Button'
[    11.737] (**) Power Button: always reports core events
[    11.737] (**) Option "Device" "/dev/input/event1"
[    11.738] (**) Option "_source" "server/udev"
[    11.738] (II) event1  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    11.738] (II) event1  - (II) Power Button: (II) device is a keyboard
[    11.738] (II) event1  - (II) Power Button: (II) device removed
[    11.747] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    11.747] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    11.747] (**) Option "xkb_model" "pc105"
[    11.747] (**) Option "xkb_layout" "fr"
[    11.747] (**) Option "xkb_options" "compose:rwin"
[    11.759] (II) event1  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    11.759] (II) event1  - (II) Power Button: (II) device is a keyboard
[    11.759] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[    11.759] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    11.759] (**) Video Bus: Applying InputClass "system-keyboard"
[    11.759] (II) Using input driver 'libinput' for 'Video Bus'
[    11.759] (**) Video Bus: always reports core events
[    11.759] (**) Option "Device" "/dev/input/event2"
[    11.759] (**) Option "_source" "server/udev"
[    11.760] (II) event2  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    11.760] (II) event2  - (II) Video Bus: (II) device is a keyboard
[    11.760] (II) event2  - (II) Video Bus: (II) device removed
[    11.767] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[    11.767] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    11.767] (**) Option "xkb_model" "pc105"
[    11.767] (**) Option "xkb_layout" "fr"
[    11.767] (**) Option "xkb_options" "compose:rwin"
[    11.767] (II) event2  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    11.767] (II) event2  - (II) Video Bus: (II) device is a keyboard
[    11.767] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    11.767] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    11.767] (**) Power Button: Applying InputClass "system-keyboard"
[    11.767] (II) Using input driver 'libinput' for 'Power Button'
[    11.767] (**) Power Button: always reports core events
[    11.767] (**) Option "Device" "/dev/input/event0"
[    11.767] (**) Option "_source" "server/udev"
[    11.767] (II) event0  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    11.767] (II) event0  - (II) Power Button: (II) device is a keyboard
[    11.767] (II) event0  - (II) Power Button: (II) device removed
[    11.773] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[    11.773] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    11.773] (**) Option "xkb_model" "pc105"
[    11.773] (**) Option "xkb_layout" "fr"
[    11.773] (**) Option "xkb_options" "compose:rwin"
[    11.773] (II) event0  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    11.773] (II) event0  - (II) Power Button: (II) device is a keyboard
[    11.773] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event3)
[    11.773] (II) No input driver specified, ignoring this device.
[    11.773] (II) This device may have been added with another device file.
[    11.773] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event4)
[    11.773] (II) No input driver specified, ignoring this device.
[    11.773] (II) This device may have been added with another device file.
[    11.773] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event5)
[    11.773] (II) No input driver specified, ignoring this device.
[    11.774] (II) This device may have been added with another device file.
[    11.774] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event6)
[    11.774] (II) No input driver specified, ignoring this device.
[    11.774] (II) This device may have been added with another device file.
[    11.774] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event7)
[    11.774] (II) No input driver specified, ignoring this device.
[    11.774] (II) This device may have been added with another device file.
[    11.774] (II) config/udev: Adding input device THRUSTMASTER Top Gun Fox 2  Pro  (/dev/input/event19)
[    11.774] (II) No input driver specified, ignoring this device.
[    11.774] (II) This device may have been added with another device file.
[    11.774] (II) config/udev: Adding input device THRUSTMASTER Top Gun Fox 2  Pro  (/dev/input/js0)
[    11.774] (II) No input driver specified, ignoring this device.
[    11.774] (II) This device may have been added with another device file.
[    11.775] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event17)
[    11.775] (**) Logitech USB Receiver: Applying InputClass "libinput pointer catchall"
[    11.775] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[    11.775] (**) Logitech USB Receiver: always reports core events
[    11.775] (**) Option "Device" "/dev/input/event17"
[    11.775] (**) Option "_source" "server/udev"
[    11.775] (II) event17 - (II) Logitech USB Receiver: (II) is tagged by udev as: Mouse
[    11.775] (II) event17 - (II) Logitech USB Receiver: (II) device is a pointer
[    11.775] (II) event17 - (II) Logitech USB Receiver: (II) device removed
[    11.787] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046D:C52F.0001/input/input17/event17"
[    11.787] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 9)
[    11.787] (**) Option "AccelerationScheme" "none"
[    11.787] (**) Logitech USB Receiver: (accel) selected scheme none/0
[    11.787] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    11.787] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    11.788] (II) event17 - (II) Logitech USB Receiver: (II) is tagged by udev as: Mouse
[    11.788] (II) event17 - (II) Logitech USB Receiver: (II) device is a pointer
[    11.788] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[    11.788] (II) No input driver specified, ignoring this device.
[    11.788] (II) This device may have been added with another device file.
[    11.789] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event18)
[    11.789] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[    11.789] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[    11.789] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[    11.789] (**) Logitech USB Receiver: always reports core events
[    11.789] (**) Option "Device" "/dev/input/event18"
[    11.789] (**) Option "_source" "server/udev"
[    11.789] (II) event18 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard
[    11.789] (II) event18 - (II) Logitech USB Receiver: (II) device is a keyboard
[    11.789] (II) event18 - (II) Logitech USB Receiver: (II) device removed
[    11.798] (II) libinput: Logitech USB Receiver: needs a virtual subdevice
[    11.798] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C52F.0002/input/input18/event18"
[    11.798] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[    11.798] (**) Option "AccelerationScheme" "none"
[    11.798] (**) Logitech USB Receiver: (accel) selected scheme none/0
[    11.798] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[    11.798] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[    11.798] (II) event18 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard
[    11.798] (II) event18 - (II) Logitech USB Receiver: (II) device is a keyboard
[    11.798] (II) config/udev: Adding input device Logitech K270 (/dev/input/event21)
[    11.798] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[    11.798] (**) Logitech K270: Applying InputClass "system-keyboard"
[    11.798] (II) Using input driver 'libinput' for 'Logitech K270'
[    11.798] (**) Logitech K270: always reports core events
[    11.798] (**) Option "Device" "/dev/input/event21"
[    11.798] (**) Option "_source" "server/udev"
[    11.799] (II) event21 - (II) Logitech K270: (II) is tagged by udev as: Keyboard
[    11.799] (II) event21 - (II) Logitech K270: (II) device is a keyboard
[    11.799] (II) event21 - (II) Logitech K270: (II) device removed
[    11.810] (II) libinput: Logitech K270: needs a virtual subdevice
[    11.810] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:046D:C52B.0005/0003:046D:4003.0008/input/input21/event21"
[    11.810] (II) XINPUT: Adding extended input device "Logitech K270" (type: MOUSE, id 11)
[    11.810] (**) Option "AccelerationScheme" "none"
[    11.810] (**) Logitech K270: (accel) selected scheme none/0
[    11.810] (**) Logitech K270: (accel) acceleration factor: 2.000
[    11.810] (**) Logitech K270: (accel) acceleration threshold: 4
[    11.810] (II) event21 - (II) Logitech K270: (II) is tagged by udev as: Keyboard
[    11.810] (II) event21 - (II) Logitech K270: (II) device is a keyboard
[    11.810] (II) config/udev: Adding input device Logitech M185 (/dev/input/event20)
[    11.810] (**) Logitech M185: Applying InputClass "libinput pointer catchall"
[    11.810] (II) Using input driver 'libinput' for 'Logitech M185'
[    11.810] (**) Logitech M185: always reports core events
[    11.810] (**) Option "Device" "/dev/input/event20"
[    11.810] (**) Option "_source" "server/udev"
[    11.811] (II) event20 - (II) Logitech M185: (II) is tagged by udev as: Mouse
[    11.811] (II) event20 - (II) Logitech M185: (II) device set to 800 DPI
[    11.811] (II) event20 - (II) Logitech M185: (II) device is a pointer
[    11.811] (II) event20 - (II) Logitech M185: (II) device removed
[    11.825] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:046D:C52B.0005/0003:046D:4008.0007/input/input20/event20"
[    11.825] (II) XINPUT: Adding extended input device "Logitech M185" (type: MOUSE, id 12)
[    11.825] (**) Option "AccelerationScheme" "none"
[    11.825] (**) Logitech M185: (accel) selected scheme none/0
[    11.825] (**) Logitech M185: (accel) acceleration factor: 2.000
[    11.825] (**) Logitech M185: (accel) acceleration threshold: 4
[    11.825] (II) event20 - (II) Logitech M185: (II) is tagged by udev as: Mouse
[    11.825] (II) event20 - (II) Logitech M185: (II) device set to 800 DPI
[    11.825] (II) event20 - (II) Logitech M185: (II) device is a pointer
[    11.825] (II) config/udev: Adding input device Logitech M185 (/dev/input/mouse1)
[    11.825] (II) No input driver specified, ignoring this device.
[    11.825] (II) This device may have been added with another device file.
[    11.826] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event10)
[    11.826] (II) No input driver specified, ignoring this device.
[    11.826] (II) This device may have been added with another device file.
[    11.826] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
[    11.826] (II) No input driver specified, ignoring this device.
[    11.826] (II) This device may have been added with another device file.
[    11.827] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event12)
[    11.827] (II) No input driver specified, ignoring this device.
[    11.827] (II) This device may have been added with another device file.
[    11.827] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event13)
[    11.827] (II) No input driver specified, ignoring this device.
[    11.827] (II) This device may have been added with another device file.
[    11.827] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event14)
[    11.827] (II) No input driver specified, ignoring this device.
[    11.827] (II) This device may have been added with another device file.
[    11.827] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event15)
[    11.827] (II) No input driver specified, ignoring this device.
[    11.827] (II) This device may have been added with another device file.
[    11.828] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event16)
[    11.828] (II) No input driver specified, ignoring this device.
[    11.828] (II) This device may have been added with another device file.
[    11.828] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[    11.828] (II) No input driver specified, ignoring this device.
[    11.828] (II) This device may have been added with another device file.
[    11.828] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event9)
[    11.828] (II) No input driver specified, ignoring this device.
[    11.828] (II) This device may have been added with another device file.
[    11.848] (**) Logitech USB Receiver: Applying InputClass "libinput keyboard catchall"
[    11.848] (**) Logitech USB Receiver: Applying InputClass "system-keyboard"
[    11.848] (II) Using input driver 'libinput' for 'Logitech USB Receiver'
[    11.848] (**) Logitech USB Receiver: always reports core events
[    11.848] (**) Option "Device" "/dev/input/event18"
[    11.848] (**) Option "_source" "_driver/libinput"
[    11.848] (II) libinput: Logitech USB Receiver: is a virtual subdevice
[    11.848] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C52F.0002/input/input18/event18"
[    11.848] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 13)
[    11.848] (**) Option "xkb_model" "pc105"
[    11.848] (**) Option "xkb_layout" "fr"
[    11.848] (**) Option "xkb_options" "compose:rwin"
[    11.848] (**) Logitech K270: Applying InputClass "libinput keyboard catchall"
[    11.848] (**) Logitech K270: Applying InputClass "system-keyboard"
[    11.848] (II) Using input driver 'libinput' for 'Logitech K270'
[    11.848] (**) Logitech K270: always reports core events
[    11.848] (**) Option "Device" "/dev/input/event21"
[    11.848] (**) Option "_source" "_driver/libinput"
[    11.848] (II) libinput: Logitech K270: is a virtual subdevice
[    11.848] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-6/3-6:1.2/0003:046D:C52B.0005/0003:046D:4003.0008/input/input21/event21"
[    11.848] (II) XINPUT: Adding extended input device "Logitech K270" (type: KEYBOARD, id 14)
[    11.848] (**) Option "xkb_model" "pc105"
[    11.848] (**) Option "xkb_layout" "fr"
[    11.848] (**) Option "xkb_options" "compose:rwin"
[    13.701] (II) intel(0): EDID vendor "GSM", prod id 19268
[    13.701] (II) intel(0): Using hsync ranges from config file
[    13.701] (II) intel(0): Using vrefresh ranges from config file
[    13.701] (II) intel(0): Printing DDC gathered Modelines:
[    13.701] (II) intel(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[    13.701] (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    13.701] (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    13.701] (II) intel(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    13.701] (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[    13.701] (II) intel(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    13.701] (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    13.701] (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[    13.701] (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    13.701] (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   338.957] (II) event1  - (II) Power Button: (II) device removed
[   338.963] (II) event2  - (II) Video Bus: (II) device removed
[   338.971] (II) event0  - (II) Power Button: (II) device removed
[   338.983] (II) event17 - (II) Logitech USB Receiver: (II) device removed
[   338.999] (II) event20 - (II) Logitech M185: (II) device removed
[   339.015] (II) event18 - (II) Logitech USB Receiver: (II) device removed
[   339.023] (II) event21 - (II) Logitech K270: (II) device removed
[   339.031] (II) AIGLX: Suspending AIGLX clients for VT switch
[   370.763] (II) Open ACPI successful (/var/run/acpid.socket)
[   370.763] (II) AIGLX: Resuming AIGLX clients after VT switch
[   370.763] (II) intel(0): switch to mode 1280x1024@60.0 on HDMI1 using pipe 0, position (0, 0), rotation normal, reflection none
[   370.847] (II) event1  - (II) Power Button: (II) is tagged by udev as: Keyboard
[   370.847] (II) event1  - (II) Power Button: (II) device is a keyboard
[   370.847] (II) event2  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[   370.847] (II) event2  - (II) Video Bus: (II) device is a keyboard
[   370.847] (II) event0  - (II) Power Button: (II) is tagged by udev as: Keyboard
[   370.847] (II) event0  - (II) Power Button: (II) device is a keyboard
[   370.900] (II) event17 - (II) Logitech USB Receiver: (II) is tagged by udev as: Mouse
[   370.900] (II) event17 - (II) Logitech USB Receiver: (II) device is a pointer
[   370.900] (II) event18 - (II) Logitech USB Receiver: (II) is tagged by udev as: Keyboard
[   370.900] (II) event18 - (II) Logitech USB Receiver: (II) device is a keyboard
[   370.900] (II) event21 - (II) Logitech K270: (II) is tagged by udev as: Keyboard
[   370.900] (II) event21 - (II) Logitech K270: (II) device is a keyboard
[   370.901] (II) event20 - (II) Logitech M185: (II) is tagged by udev as: Mouse
[   370.901] (II) event20 - (II) Logitech M185: (II) device set to 800 DPI
[   370.901] (II) event20 - (II) Logitech M185: (II) device is a pointer
 


Code BASH :
cat /etc/X11/xorg.conf
# File generated by XFdrake (rev 262502)
 
# **********************************************************************
# Refer to the xorg.conf man page for details about the format of
# this file.
# **********************************************************************
 
Section "ServerFlags"
    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
    Option "DontZap" "False" # disable <Ctrl><Alt><BS> (server abort)
    #DontZoom # disable <Ctrl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection
 
Section "Module"
    Load "v4l" # Video for Linux
EndSection
 
Section "Monitor"
    Identifier "monitor1"
    VendorName "Plug'n Play"
    ModelName "L1953TR "
    HorizSync 30-71
    VertRefresh 56-75
 
    # Apple iMac modes
    ModeLine "1024x768"   78.525 1024 1049 1145 1312   768  769  772  800 +hsync +vsync
    ModeLine "800x600"    62.357  800  821  901 1040   600  601  604  632 +hsync +vsync
    ModeLine "640x480"    49.886  640  661  725  832   480  481  484  514 +hsync +vsync
 
    # Apple monitors tend to do 832x624
    ModeLine "832x624"    57      832  876  940 1152   624  625  628  667 -hsync -vsync
 
    # Apple PowerBook G3
    ModeLine "800x600"    100     800  816  824  840   600  616  624  640 -hsync -vsync
 
    # Apple TI Powerbook
    ModeLine "1152x768"   78.741 1152 1173 1269 1440   768  769  772  800 +vsync +vsync
 
    # Pismo Firewire G3
    ModeLine "1024x768"   65     1024 1032 1176 1344   768  771  777  806 -hsync -vsync
 
    # iBook2
    ModeLine "1024x768"   65     1024 1048 1184 1344   768  771  777  806 -hsync -vsync
 
    # 17" Apple Studio Display
    ModeLine "1024x768"   112.62 1024 1076 1248 1420 768 768 780 808 +hsync +vsync
 
    # HiRes Apple Studio Display
    ModeLine "1280x1024"  135    1280 1288 1392 1664  1024 1027 1030 1064
 
    # Another variation
    ModeLine "1280x1024"  134.989 1280 1317 1429 1688  1024 1025 1028 1066 +hsync +vsync
 
    # TV fullscreen mode or DVD fullscreen output.
    # 768x576 @ 79 Hz, 50 kHz hsync
    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
 
    # 768x576 @ 100 Hz, 61.6 kHz hsync
    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
EndSection
 
Section "Device"
    Identifier "device1"
    VendorName "Intel Corporation"
    BoardName "Intel 810 and later"
    Driver "intel"
    Option "DPMS"
EndSection
 
Section "Screen"
    Identifier "screen1"
    Device "device1"
    Monitor "monitor1"
    DefaultColorDepth 24
 
    Subsection "Display"
        Depth 8
        Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
 
    Subsection "Display"
        Depth 15
        Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
 
    Subsection "Display"
        Depth 16
        Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
 
    Subsection "Display"
        Depth 24
        Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "640x480" "480x360" "320x240"
    EndSubsection
EndSection
 
Section "ServerLayout"
    Identifier "layout1"
    Screen "screen1"
EndSection
 


Légère différence : en me logant en plasma5 sur un autre compte, j'ai eu cette fois une image pendant une à deux secondes avant que tout ne redevienne noir.

Merci de ton aide

Site web    
vouf Membre non connecté

Rang

Avatar

Webmaster Administrateur

Inscrit le : 16/08/2008 à 08h27

Localisation : Gironde

Messages: 2953

Le 14/01/2018 à 07h52
Bonjour

J'ai trouvé ce bug . On verra si cela peut apporter une solution à ton problème.

Il faut modifier ton fichier /etc/X11/xorg.conf pour activer l'acceleration uxa. Au niveau de la section device, tu as :

Code TEXT :
Section "Device"
    Identifier "device1"
    VendorName "Intel Corporation"
    BoardName "Intel 810 and later"
    Driver "intel"
    Option "DPMS"
EndSection


Change là pour avoir

Code TEXT :
Section "Device"
    Identifier "device1"
    VendorName "Intel Corporation"
    BoardName "Intel 810 and later"
    Driver "intel"
    Option "AccelMethod" "uxa"
    Option "DPMS"
EndSection


Puis redémarre ta machine




Mageia 7 64 bits Plasma 5- Asus B150 Pro Gaming-Intel Core i7 6700-16 Go Hyper X Fury DDR4-2133 Mhz-Asus Strix GTX Nvidia 1060 - Go-M2 Samsung Evo 970 1Tb-SSD 512 Gb Samsung Evo 960 -Raspberry PI2
   
alouali Membre non connecté

Rang

Avatar

Inscrit le : 15/02/2014 à 09h56

Localisation : Lyon, France

Messages: 36

Le 14/01/2018 à 08h54
Bonjour,

je viens d'essayer, sans succès :-( Plasma 5 toujours tout noir, sur un ancien compte ou sur un nouveau compte vide, Xfce qui fonctionne...



Site web    
alouali Membre non connecté

Rang

Avatar

Inscrit le : 15/02/2014 à 09h56

Localisation : Lyon, France

Messages: 36

Le 14/01/2018 à 08h59
L'écran est noir mais pas bloqué : quand je fais "Ctrl Alt Suppr" pour me déconnecter, pendant 1/10e de seconde il réapparait, je ne sais pas si ça peut aider.
Site web    
vouf Membre non connecté

Rang

Avatar

Webmaster Administrateur

Inscrit le : 16/08/2008 à 08h27

Localisation : Gironde

Messages: 2953

Le 14/01/2018 à 10h09
Bonjour

J'ai également vu qu'en supprimant le répertoire .cache du compte cela pouvait résoudre certains problèmes :

Code BASH :
rm -fr ~/.cache


Maintenant, vu que le problème est également constaté sur un compte vierge, je doute que cette technique résolve ton soucis... Je ne vois pas d'erreur au niveau de la configuration de la partie graphique. D'ailleurs, on ne voit pas d'erreur au niveau des logs..


La seule piste valable, est effectivement un soucis avec plasma... Peut être :

Code BASH :
urpme task-plasma5


puis

Code BASH :
urpmi task-plasma5


Sinon, peut être envisager une réinstallation.....


Mageia 7 64 bits Plasma 5- Asus B150 Pro Gaming-Intel Core i7 6700-16 Go Hyper X Fury DDR4-2133 Mhz-Asus Strix GTX Nvidia 1060 - Go-M2 Samsung Evo 970 1Tb-SSD 512 Gb Samsung Evo 960 -Raspberry PI2
   
Ami age Membre non connecté

Rang

Avatar

Modérateur

Inscrit le : 18/08/2012 à 10h28

Localisation : France

Messages: 4533

Le 14/01/2018 à 10h10
tenter de changer de pilote graphique avec XFdrake

se connecter en admin avec la commande su
taper son mot de passe root

lancer la commande XFdrake
puis essayer le pilote libre intel (les pilotes libres sont au bas dans la seconde partie de liste dans le groupe XORG(et les proprio au début groupe VENDOR))
redémarrer

si cela ne marche pas,
essayer le pilote vesa

j'ai été dans la même situation avec mon APU AMD A9700E
et ces manips mon permis de reprendre la main avec l'interace graphique, avec le pilote vesa
puis lancer toutes les mises à jours,
et j'ai pu remettre le pilote propriétaire ensuite


Edité par Ami age Le 14/01/2018 à 10h11


.
_____________________________________ :silence: :silence: :silence:
::d . .Un petit clic pour Mageia ? =>> CLIQUEZ I C I :
.
Site web    
alouali Membre non connecté

Rang

Avatar

Inscrit le : 15/02/2014 à 09h56

Localisation : Lyon, France

Messages: 36

Le 14/01/2018 à 14h06
Bonjour,

c'est la cata !

rm -rf .cache et urpme / urpmi task-plasma5 n'ont rien changé.

Par contre le fait d'essayer un autre pilote (intel libre puis vesa) m'a fait perdre le menu grub ! (GRUB minimal BASH...).

Heureusement en bootant avec ma clé live, j'ai pu remettre l'ancien xorg.conf, redémarrer et refaire un update-grub2.

Malheureusement depuis mon compte ne marche plus : refus de connexion même sous Xfce (quelques secondes puis revient sur l'écran de log, sans message d'erreur). Par contre je peux toujours me logger en console. Les autres utilisateurs eux par contre fonctionnent encore.
Site web    
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie