Connexion

Besoin d'aide ? Une question ? Un avis ? Rejoignez nous sur notre salon IRC pour clavarder

Forum

Système et matériels » Imprimantes scanners et Appareils Photo [Réglé] Quels changements dans CUPS recemment ? plus d'impression depuis quelques semaines

ylyco Membre non connecté

Rang

Avatar

Inscrit le : 31/12/2014 à 21h51

Messages: 87

Le 07/12/2017 à 18h14
Bonjour monde libre,

je voudrai savoir si les dernières mises à jour des paquets :
- task-printing-misc-2011-10.mga6.x86_64
- cups-common-2.2.6-1.mga6.x86_64
peuvent avoir un impact négatif sur vos imprimantes ?

Personnellement, j'utilisais jusqu'à peu de temps mon imprimante DELL 1320c (avec le pilote de FX_DocuPrint_C525_A_AP en format i386) sans problème sous Mageia 5 et 6 (64 bits).

Mais je me suis rendu compte très récemment que cela ne fonctionne plus du tout...

J'ai eu beau supprimer mon imprimante, et la reparamétrer depuis zéro : sans succès. Que se soit à travers le serveur d'impression de ma freebox (qui marchait parfaitement jusqu'alors), ou directement en USB.

Sous Windows, par contre, je n'ai rencontré aucun problème d'utilisation, ni à travers le serveur d'impression Freebox, ni en usb directement.

Donc j'essaie de m'informer sur vos imprimantes, pour savoir si vous avez rencontré un problème similaire.

Quand je lance un page de test d'impression, l'imprimante sort de sa veille, mais le voyant des "datas" clignote orange (au lieu de vert), puis s'arrête de clignoter et sans avoir rien imprimé.
La file d'impression ne m'indique aucun problème détecté, tout à l'air ok pour elle, elle traite la demande d'impression sans message d'erreur, mais rien ne s'imprime.
Dans CUPS (http://localhost:631/printers/Dell-Color-Laser-1320c?which_jobs=completed) non plus aucune erreur détectée.

C'est comme si le pilote n'était plus adapté.

Merci pour vos retours d'expérience.
   
Papoteur Membre non connecté

Rang

Avatar

Modérateur Équipe Mageia

Inscrit le : 03/10/2011 à 22h16

Localisation : Metz

Messages: 8019

Le 08/12/2017 à 08h50
Bonjour,
J'ai les mêmes et pas de soucis pour l'impression avec ma Brother.
Tu peux tenter de revenir en arrière, en désinstallant ces deux paquets et en installant depuis le CCM la version précédente.
Si ça vient du pilote, ce qui est fort possible, ceux-ci sont stockés dans /usr/share/ppd
Peut-être que Dell fournit une version à jour de son pilote PPD.


Yves
   
ylyco Membre non connecté

Rang

Avatar

Inscrit le : 31/12/2014 à 21h51

Messages: 87

Le 17/12/2017 à 21h49
Merci Papoteur.

Dans /usr/share/ppd : je n'avais pas le ppd de l'imprimante.
J'ai arrêté le service CUPS, copié le ppd correspondant dans /usr/share/ppd, lancé Cups à nouveau.
Résultat : toujours pas de page de test qui ne sorte...

Pour info:
j'ai un autre poste sous Mageia6 qui a encore Cups en 2.2.4, j'utilise le même pilote, en mode AppSocket/HP JetDirect également à travers le serveur d'impression de ma freebox : tout fonctionne parfaitement.
Sur mon poste qui a le problème, tout fonctionnait bien aussi, jusqu'à ce que je me rende compte récemment que ce n'était plus le cas, et ça pourrait coïncider au passage en cups 2.2.6 ?...
J'ai essayé de désinstaller la 2.2.6 pour revenir en 2.2.4 : mais ça ne fonctionne pas mieux, c'est à dire que l'impression de la page de test ne sort même pas mon imprimante de sa veille.
J'ai essayé aussi de tout désinstaller au niveau de CUPS et de supprimer manuellement tout ce qui était de type dossier "cups", rebooter le PC, puis réinstaller cups en 2.2.4, mais j'ai dû manquer une suppression, car quand je lance une demande de page de test : le compteur des jobs n'est pas repartit de "1" mais bien du même rang d'avant la suppression de cups (çàd "332").

1 - comment réinstaller cups "proprement" depuis zéro (j'ai dû mettre le bazar dans les fichiers ?... ) ? y a-t-il des répertoires particuliers à supprimer manuellement (le compteur de "jobs" étant repartit au même nombre qu'avant de supprimer les paquets de cups, il doit y avoir une sorte d'historique que je n'ai pas supprimé ) ?

2 - je n'ai pas de message d'erreur dans http://localhost:631 quand je lui demande d'imprimer les pages de test, tout semble aller pour lui.

3 - mon imprimante est une laser couleur DELL 1320c, mais elle n'est pas compatible linux, elle l'est quand on se sert du pilote d'une " FX DocuPrint C525 A-AP v1.0 ". Ça marchait très bien jusque là (et ça marche encore sur mon autre pc resté en 2.2.4).

4 - si je prend un autre pilote que celui indiqué ci-dessus, au hasard dans la liste disponible (une autre Dell, ou Fuji Xerox, ou même une HP par exemple), quand je demande un page de test : au moins l'imprimante sort de sa veille, mais n'imprime pas (forcement), et je n'ai pas non plus de message d'erreur dans cups d'ailleurs.
Avec mon pilote (en i386) qui marchait jusque là, elle réagit encore moins bien (pas du tout même) qu'avec un pilote farfelu...

5 - Où est-ce que, dans Mageia, on peut trouver des fichiers cups "cachés", qui garderait en mémoire des paramétrages de précédentes installations ?

Merci d'avance pour toute information
   
Papoteur Membre non connecté

Rang

Avatar

Modérateur Équipe Mageia

Inscrit le : 03/10/2011 à 22h16

Localisation : Metz

Messages: 8019

Le 18/12/2017 à 08h37
Pour connaître mieux ce qu'il se passe :
Activer l'enregistrement des logs :
http://localhost:631/admin
coher la case "Save debugging information for troubleshooting" (pas vérifié)
Puis
http://localhost:631/admin/log/error_log


Yves
   
ylyco Membre non connecté

Rang

Avatar

Inscrit le : 31/12/2014 à 21h51

Messages: 87

Le 18/12/2017 à 09h07
Merci Yves pour attention.

quand je clique sur le lien : http://localhost:631/admin/log/error_log
J'ai une page indiquant " Not found ".

   
Papoteur Membre non connecté

Rang

Avatar

Modérateur Équipe Mageia

Inscrit le : 03/10/2011 à 22h16

Localisation : Metz

Messages: 8019

Le 18/12/2017 à 12h14
Oui, tant que l'enregistrement des logs n'est pas activé, il n'y a rien.
Il faut activer, faire une utilisation, puis voir après.
J'ai le souvenir vague que les logs allait dans le journal, et qu'il fallait modifier la configuration pour que la destination soit les fichier. Mais je ne retrouve plus cette information.


Yves
   
Papoteur Membre non connecté

Rang

Avatar

Modérateur Équipe Mageia

Inscrit le : 03/10/2011 à 22h16

Localisation : Metz

Messages: 8019

Le 18/12/2017 à 12h53
Re,
Il y a des fois où ma mémoire n'est pas si nulle.
J'ai retrouvé la source de l'information : https://bugs.mageia.org/show_bug.cgi?id=16330#c41
traduit :

editer /etc/cups/cupsd.conf
changer warn en debug dans :
LogLevel debug

dans /etc/cups/cups-files.conf
changer la ligne ErrorLog en :
ErrorLog /var/log/cups/error_log


redémarer cups

par la commande :
Code BASH :
systemctl restart cups


Yves
   
ylyco Membre non connecté

Rang

Avatar

Inscrit le : 31/12/2014 à 21h51

Messages: 87

Le 18/12/2017 à 22h02
ok, grâce à ta méthode, voici le résultat obtenu pour une demande de page de test, alors que j'ai reconfiguré l'imprimante en usb :
(je ne trouve pas d'erreur, mais j'avoue ne pas avoir un œil exercé à ce type d'étude, donc je me permets de retranscrire ce qui pourrait aider à trouver s'il y a un problème, désolé pour la longueur du post)

Code TEXT :
 
D [18/Dec/2017:21:55:23 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [18/Dec/2017:21:55:23 +0100] [Client 150] Server address is "127.0.0.1".
D [18/Dec/2017:21:55:23 +0100] [Client 150] Accepted from localhost:59708 (IPv4)
D [18/Dec/2017:21:55:23 +0100] [Client 150] Waiting for request.
I [18/Dec/2017:21:55:23 +0100] Expiring subscriptions...
D [18/Dec/2017:21:55:23 +0100] cupsdAddCert: Adding certificate for PID 0
D [18/Dec/2017:21:55:23 +0100] Report: clients=1
D [18/Dec/2017:21:55:23 +0100] Report: jobs=5
D [18/Dec/2017:21:55:23 +0100] Report: jobs-active=0
D [18/Dec/2017:21:55:23 +0100] Report: printers=1
D [18/Dec/2017:21:55:23 +0100] Report: stringpool-string-count=6930
D [18/Dec/2017:21:55:23 +0100] Report: stringpool-alloc-bytes=9912
D [18/Dec/2017:21:55:23 +0100] Report: stringpool-total-bytes=147640
D [18/Dec/2017:21:55:23 +0100] [Client 150] POST /printers/Dell_Color_Laser_1320c HTTP/1.1
D [18/Dec/2017:21:55:23 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [18/Dec/2017:21:55:23 +0100] [Client 150] Read: status=200, state=6
D [18/Dec/2017:21:55:23 +0100] [Client 150] Authorized as "regis" using Basic.
D [18/Dec/2017:21:55:23 +0100] [CGI] argv[0] = "/usr/lib/cups/cgi-bin/printers.cgi"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[0] = "CUPS_CACHEDIR=/var/cache/cups"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[1] = "CUPS_DATADIR=/usr/share/cups"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[2] = "CUPS_DOCROOT=/usr/share/cups/www"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[3] = "CUPS_FONTPATH=/usr/share/cups/fonts"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[4] = "CUPS_REQUESTROOT=/var/spool/cups"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[5] = "CUPS_SERVERBIN=/usr/lib/cups"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[6] = "CUPS_SERVERROOT=/etc/cups"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[7] = "CUPS_STATEDIR=/var/run/cups"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[8] = "HOME=/var/spool/cups/tmp"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[9] = "PATH=/usr/lib/cups/filter:/usr/lib64/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[10] = "SERVER_ADMIN=root@localhost"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[11] = "SOFTWARE=CUPS/2.2.6"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[12] = "TMPDIR=/var/spool/cups/tmp"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[13] = "USER=root"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[14] = "CUPS_MAX_MESSAGE=2047"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[15] = "CUPS_SERVER=/var/run/cups/cups.sock"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[16] = "CUPS_ENCRYPTION=IfRequested"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[17] = "IPP_PORT=631"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[18] = "AUTH_TYPE=Basic"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[19] = "LANG=en_US.UTF8"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[20] = "REDIRECT_STATUS=1"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[21] = "GATEWAY_INTERFACE=CGI/1.1"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[22] = "SERVER_NAME=localhost"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[23] = "SERVER_PORT=631"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[24] = "REMOTE_ADDR=127.0.0.1"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[25] = "REMOTE_HOST=localhost"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[26] = "SCRIPT_NAME=/printers/Dell_Color_Laser_1320c"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[27] = "SCRIPT_FILENAME=/usr/share/cups/www/printers/Dell_Color_Laser_1320c"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[28] = "PATH_INFO=/Dell_Color_Laser_1320c"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[29] = "REMOTE_USER=regis"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[30] = "SERVER_PROTOCOL=HTTP/1.1"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[31] = "HTTP_COOKIE=org.cups.sid=ccbcd9f9429f90159be453f4d1fc2db6"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[32] = "HTTP_USER_AGENT=Mozilla/5.0 (X11; Linux x86_64; rv:52.0) Gecko/20100101 Firefox/52.0"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[33] = "HTTP_REFERER=http://localhost:631/printers/Dell_Color_Laser_1320c"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[34] = "REQUEST_METHOD=POST"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[35] = "CONTENT_LENGTH=64"
D [18/Dec/2017:21:55:23 +0100] [CGI] envp[36] = "CONTENT_TYPE=application/x-www-form-urlencoded"
D [18/Dec/2017:21:55:23 +0100] cupsdAddCert: Adding certificate for PID 11360
D [18/Dec/2017:21:55:23 +0100] [CGI] Started /usr/lib/cups/cgi-bin/printers.cgi (PID 11360)
I [18/Dec/2017:21:55:23 +0100] [Client 150] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=11360, file=18)
D [18/Dec/2017:21:55:23 +0100] [Client 150] Waiting for CGI data.
D [18/Dec/2017:21:55:23 +0100] [CGI] org.cups.sid cookie is \"ccbcd9f9429f90159be453f4d1fc2db6\"
D [18/Dec/2017:21:55:23 +0100] [CGI] cgiSetVariable: org.cups.sid=\"ccbcd9f9429f90159be453f4d1fc2db6\"
D [18/Dec/2017:21:55:23 +0100] [CGI] cgiSetVariable: OP=\"print-test-page\"
D [18/Dec/2017:21:55:23 +0100] [CGI] cgiSetVariable: SECTION=\"printers\"
D [18/Dec/2017:21:55:23 +0100] [CGI] cgiSetVariable: REFRESH_PAGE=\"\"
D [18/Dec/2017:21:55:23 +0100] [CGI] cgiSetVariable: PRINTER_NAME=\"Dell_Color_Laser_1320c\"
D [18/Dec/2017:21:55:23 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [18/Dec/2017:21:55:23 +0100] [Client 151] Server address is "/var/run/cups/cups.sock".
D [18/Dec/2017:21:55:23 +0100] [Client 151] Accepted from localhost (Domain)
D [18/Dec/2017:21:55:23 +0100] [Client 151] Waiting for request.
D [18/Dec/2017:21:55:23 +0100] [Client 151] POST /printers/Dell_Color_Laser_1320c HTTP/1.1
D [18/Dec/2017:21:55:23 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [18/Dec/2017:21:55:23 +0100] [Client 151] Read: status=200, state=6
D [18/Dec/2017:21:55:23 +0100] [Client 151] No authentication data provided.
D [18/Dec/2017:21:55:23 +0100] [Client 151] 1.1 Print-Job 1
D [18/Dec/2017:21:55:23 +0100] Print-Job ipp://localhost:631/printers/Dell_Color_Laser_1320c
D [18/Dec/2017:21:55:23 +0100] [Job ???] Auto-typing file...
I [18/Dec/2017:21:55:23 +0100] [Job ???] Request file type is application/vnd.cups-pdf-banner.
D [18/Dec/2017:21:55:23 +0100] cupsdMarkDirty(---J-)
D [18/Dec/2017:21:55:23 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [18/Dec/2017:21:55:23 +0100] [Job 383] Applying default options...
D [18/Dec/2017:21:55:23 +0100] add_job: requesting-user-name="regis"
D [18/Dec/2017:21:55:23 +0100] Adding default job-sheets values "none,none"...
I [18/Dec/2017:21:55:23 +0100] [Job 383] Adding start banner page "none".
D [18/Dec/2017:21:55:23 +0100] cupsdMarkDirty(----S)
D [18/Dec/2017:21:55:23 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [18/Dec/2017:21:55:23 +0100] cupsdMarkDirty(---J-)
D [18/Dec/2017:21:55:23 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
I [18/Dec/2017:21:55:23 +0100] [Job 383] Adding end banner page "none".
I [18/Dec/2017:21:55:23 +0100] [Job 383] File of type application/vnd.cups-pdf-banner queued by "regis".
D [18/Dec/2017:21:55:23 +0100] [Job 383] hold_until=0
I [18/Dec/2017:21:55:23 +0100] [Job 383] Queued on "Dell_Color_Laser_1320c" by "regis".
D [18/Dec/2017:21:55:23 +0100] [Job 383] time-at-processing=1513630523
D [18/Dec/2017:21:55:23 +0100] cupsdMarkDirty(---J-)
D [18/Dec/2017:21:55:23 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [18/Dec/2017:21:55:23 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [18/Dec/2017:21:55:23 +0100] cupsdMarkDirty(----S)
D [18/Dec/2017:21:55:23 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [18/Dec/2017:21:55:23 +0100] [Job 383] 4 filters for job:
D [18/Dec/2017:21:55:23 +0100] [Job 383] bannertopdf (application/vnd.cups-pdf-banner to application/pdf, cost 32)
D [18/Dec/2017:21:55:23 +0100] [Job 383] pdftopdf (application/pdf to application/vnd.cups-pdf, cost 66)
D [18/Dec/2017:21:55:23 +0100] [Job 383] pdftops (application/vnd.cups-pdf to application/vnd.cups-postscript, cost 100)
D [18/Dec/2017:21:55:23 +0100] [Job 383] /usr/lib/cups/filter/FXM_PF (application/vnd.cups-postscript to printer/Dell_Color_Laser_1320c, cost 0)
D [18/Dec/2017:21:55:23 +0100] [Job 383] job-sheets=none,none
D [18/Dec/2017:21:55:23 +0100] [Job 383] argv[0]="Dell_Color_Laser_1320c"
D [18/Dec/2017:21:55:23 +0100] [Job 383] argv[1]="383"
D [18/Dec/2017:21:55:23 +0100] [Job 383] argv[2]="regis"
D [18/Dec/2017:21:55:23 +0100] [Job 383] argv[3]="Test Page"
D [18/Dec/2017:21:55:23 +0100] [Job 383] argv[4]="1"
D [18/Dec/2017:21:55:23 +0100] [Job 383] argv[5]="job-uuid=urn:uuid:951c07c1-11a0-3273-65e3-808f60021a9d job-originating-host-name=localhost date-time-at-creation= date-time-at-processing= time-at-creation=1513630523 time-at-processing=1513630523"
D [18/Dec/2017:21:55:23 +0100] [Job 383] argv[6]="/var/spool/cups/d00383-001"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[0]="CUPS_CACHEDIR=/var/cache/cups"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[1]="CUPS_DATADIR=/usr/share/cups"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[2]="CUPS_DOCROOT=/usr/share/cups/www"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[3]="CUPS_FONTPATH=/usr/share/cups/fonts"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[4]="CUPS_REQUESTROOT=/var/spool/cups"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[5]="CUPS_SERVERBIN=/usr/lib/cups"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[6]="CUPS_SERVERROOT=/etc/cups"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[7]="CUPS_STATEDIR=/var/run/cups"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[8]="HOME=/var/spool/cups/tmp"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[9]="PATH=/usr/lib/cups/filter:/usr/lib64/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[10]="SERVER_ADMIN=root@localhost"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[11]="SOFTWARE=CUPS/2.2.6"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[12]="TMPDIR=/var/spool/cups/tmp"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[13]="USER=root"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[14]="CUPS_MAX_MESSAGE=2047"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[15]="CUPS_SERVER=/var/run/cups/cups.sock"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[16]="CUPS_ENCRYPTION=IfRequested"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[17]="IPP_PORT=631"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[18]="CHARSET=utf-8"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[19]="LANG=en_US.UTF-8"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[20]="PPD=/etc/cups/ppd/Dell_Color_Laser_1320c.ppd"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[21]="RIP_MAX_CACHE=128m"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[22]="CONTENT_TYPE=application/vnd.cups-pdf-banner"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[23]="DEVICE_URI=usb://Dell/Color%20Laser%201320c?serial=0930274620"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[24]="PRINTER_INFO=Dell Color Laser 1320c"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[25]="PRINTER_LOCATION="
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[26]="PRINTER=Dell_Color_Laser_1320c"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[27]="PRINTER_STATE_REASONS=none"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[28]="CUPS_FILETYPE=document"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[29]="FINAL_CONTENT_TYPE=application/vnd.cups-postscript"
D [18/Dec/2017:21:55:23 +0100] [Job 383] envp[30]="AUTH_I****"
I [18/Dec/2017:21:55:23 +0100] [Job 383] Started filter /usr/lib/cups/filter/bannertopdf (PID 11361)
I [18/Dec/2017:21:55:23 +0100] [Job 383] Started filter /usr/lib/cups/filter/pdftopdf (PID 11362)
I [18/Dec/2017:21:55:23 +0100] [Job 383] Started filter /usr/lib/cups/filter/pdftops (PID 11363)
I [18/Dec/2017:21:55:23 +0100] [Job 383] Started filter /usr/lib/cups/filter/FXM_PF (PID 11364)
I [18/Dec/2017:21:55:23 +0100] [Job 383] Started backend /usr/lib/cups/backend/usb (PID 11365)
D [18/Dec/2017:21:55:23 +0100] cupsdMarkDirty(----S)
D [18/Dec/2017:21:55:23 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients and dirty files"
D [18/Dec/2017:21:55:23 +0100] [Client 151] Returning IPP successful-ok for Print-Job (ipp://localhost:631/printers/Dell_Color_Laser_1320c) from localhost
D [18/Dec/2017:21:55:23 +0100] [Client 151] Content-Length: 193
D [18/Dec/2017:21:55:23 +0100] [Client 151] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [18/Dec/2017:21:55:23 +0100] [Client 151] con->http=0x557e3782ff50
D [18/Dec/2017:21:55:23 +0100] [Client 151] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=193, response=0x557e37811e20(IPP_STATE_IDLE), pipe_pid=0, file=-1
D [18/Dec/2017:21:55:23 +0100] [Client 151] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [18/Dec/2017:21:55:23 +0100] [Client 151] bytes=0, http_state=0, data_remaining=193
D [18/Dec/2017:21:55:23 +0100] [Client 151] Flushing write buffer.
D [18/Dec/2017:21:55:23 +0100] [Client 151] New state is HTTP_STATE_WAITING
D [18/Dec/2017:21:55:23 +0100] [Client 151] Waiting for request.
D [18/Dec/2017:21:55:23 +0100] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
....
etc, etc, etc
.....
 
D [18/Dec/2017:21:55:35 +0100] [Client 153] Read: status=200, state=3
D [18/Dec/2017:21:55:35 +0100] [Client 153] Authorized as "regis" using Basic.
D [18/Dec/2017:21:55:35 +0100] [Client 153] Processing GET /cups.css
D [18/Dec/2017:21:55:35 +0100] [Client 153] filename="/usr/share/cups/www/cups.css", type=text/css
D [18/Dec/2017:21:55:35 +0100] [Client 153] cupsdSendHeader: code=304, type="(null)", auth_type=0
D [18/Dec/2017:21:55:35 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [18/Dec/2017:21:55:36 +0100] Expiring subscriptions...
 
Edité par ylyco Le 18/12/2017 à 22h11
   
Papoteur Membre non connecté

Rang

Avatar

Modérateur Équipe Mageia

Inscrit le : 03/10/2011 à 22h16

Localisation : Metz

Messages: 8019

Le 19/12/2017 à 07h54
Bonjour,
Je n'en tire rien.
Peut-être revenir au niveau warn plutôt que debug.


Yves
   
ylyco Membre non connecté

Rang

Avatar

Inscrit le : 31/12/2014 à 21h51

Messages: 87

Le 19/12/2017 à 08h49
après changement avec "warn" :

Code TEXT :
 
 
I [19/Dec/2017:08:27:56 +0100] Expiring subscriptions...
I [19/Dec/2017:08:27:57 +0100] Expiring subscriptions...
I [19/Dec/2017:08:27:58 +0100] Expiring subscriptions...
I [19/Dec/2017:08:27:59 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:00 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:01 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:02 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:03 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:04 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:05 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:06 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:07 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:08 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:09 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:10 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:11 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:12 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:13 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:14 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:15 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:16 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:17 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:18 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:19 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:20 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:21 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:22 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:23 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:24 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:25 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:26 +0100] Expiring subscriptions...
I [19/Dec/2017:08:28:27 +0100] Expiring subscriptions...
D [19/Dec/2017:08:28:27 +0100] Closing client 3 after 300 seconds of inactivity.
D [19/Dec/2017:08:28:27 +0100] [Client 3] Closing connection.
D [19/Dec/2017:08:28:27 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [19/Dec/2017:08:28:28 +0100] Saving subscriptions.conf...
D [19/Dec/2017:08:28:28 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
I [19/Dec/2017:08:28:28 +0100] Expiring subscriptions...
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [19/Dec/2017:08:45:03 +0100] [Client 4] Server address is "/var/run/cups/cups.sock".
D [19/Dec/2017:08:45:03 +0100] [Client 4] Accepted from localhost (Domain)
D [19/Dec/2017:08:45:03 +0100] [Client 4] Waiting for request.
I [19/Dec/2017:08:45:03 +0100] Expiring subscriptions...
D [19/Dec/2017:08:45:03 +0100] cupsdAddCert: Adding certificate for PID 0
D [19/Dec/2017:08:45:03 +0100] Report: clients=1
D [19/Dec/2017:08:45:03 +0100] Report: jobs=6
D [19/Dec/2017:08:45:03 +0100] Report: jobs-active=0
D [19/Dec/2017:08:45:03 +0100] Report: printers=1
D [19/Dec/2017:08:45:03 +0100] Report: stringpool-string-count=675
D [19/Dec/2017:08:45:03 +0100] Report: stringpool-alloc-bytes=8200
D [19/Dec/2017:08:45:03 +0100] Report: stringpool-total-bytes=11912
D [19/Dec/2017:08:45:03 +0100] [Client 4] POST / HTTP/1.1
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [19/Dec/2017:08:45:03 +0100] [Client 4] Read: status=200, state=6
D [19/Dec/2017:08:45:03 +0100] [Client 4] No authentication data provided.
D [19/Dec/2017:08:45:03 +0100] [Client 4] 1.1 Cancel-Subscription 7
D [19/Dec/2017:08:45:03 +0100] Cancel-Subscription /
D [19/Dec/2017:08:45:03 +0100] [Client 4] Returning HTTP Non autorisé for Cancel-Subscription (/) from localhost
localhost - - [19/Dec/2017:08:45:03 +0100] "POST / HTTP/1.1" 401 123 Cancel-Subscription successful-ok
D [19/Dec/2017:08:45:03 +0100] [Client 4] cupsdSendHeader: code=401, type="text/html", auth_type=0
D [19/Dec/2017:08:45:03 +0100] [Client 4] WWW-Authenticate: Basic realm=\"CUPS\", trc=\"y\"
D [19/Dec/2017:08:45:03 +0100] [Client 4] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [19/Dec/2017:08:45:03 +0100] [Client 4] Closing connection.
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [19/Dec/2017:08:45:03 +0100] [Client 5] Server address is "/var/run/cups/cups.sock".
D [19/Dec/2017:08:45:03 +0100] [Client 5] Accepted from localhost (Domain)
D [19/Dec/2017:08:45:03 +0100] [Client 5] Waiting for request.
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
D [19/Dec/2017:08:45:03 +0100] [Client 6] Server address is "/var/run/cups/cups.sock".
D [19/Dec/2017:08:45:03 +0100] [Client 6] Accepted from localhost (Domain)
D [19/Dec/2017:08:45:03 +0100] [Client 6] Waiting for request.
D [19/Dec/2017:08:45:03 +0100] [Client 5] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [19/Dec/2017:08:45:03 +0100] [Client 5] Closing connection.
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [19/Dec/2017:08:45:03 +0100] [Client 7] Server address is "/var/run/cups/cups.sock".
D [19/Dec/2017:08:45:03 +0100] [Client 7] Accepted from localhost (Domain)
D [19/Dec/2017:08:45:03 +0100] [Client 7] Waiting for request.
D [19/Dec/2017:08:45:03 +0100] [Client 6] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [19/Dec/2017:08:45:03 +0100] [Client 6] Closing connection.
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
D [19/Dec/2017:08:45:03 +0100] [Client 7] POST / HTTP/1.1
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
D [19/Dec/2017:08:45:03 +0100] [Client 7] Read: status=200, state=6
D [19/Dec/2017:08:45:03 +0100] [Client 7] Authorized as root using PeerCred.
D [19/Dec/2017:08:45:03 +0100] [Client 7] 1.1 Cancel-Subscription 7
D [19/Dec/2017:08:45:03 +0100] Cancel-Subscription /
D [19/Dec/2017:08:45:03 +0100] cupsdIsAuthorized: username="root"
D [19/Dec/2017:08:45:03 +0100] cupsdMarkDirty(----S)
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
D [19/Dec/2017:08:45:03 +0100] [Client 7] Returning IPP successful-ok for Cancel-Subscription (/) from localhost
D [19/Dec/2017:08:45:03 +0100] [Client 7] Content-Length: 75
D [19/Dec/2017:08:45:03 +0100] [Client 7] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [19/Dec/2017:08:45:03 +0100] [Client 7] con->http=0x564dd9f2cfb0
D [19/Dec/2017:08:45:03 +0100] [Client 7] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564dd9f2cee0(IPP_STATE_DATA), pipe_pid=0, file=-1
D [19/Dec/2017:08:45:03 +0100] [Client 7] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [19/Dec/2017:08:45:03 +0100] [Client 7] bytes=0, http_state=0, data_remaining=75
localhost - root [19/Dec/2017:08:45:03 +0100] "POST / HTTP/1.1" 200 123 Cancel-Subscription successful-ok
D [19/Dec/2017:08:45:03 +0100] [Client 7] Flushing write buffer.
D [19/Dec/2017:08:45:03 +0100] [Client 7] New state is HTTP_STATE_WAITING
D [19/Dec/2017:08:45:03 +0100] [Client 7] Waiting for request.
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [19/Dec/2017:08:45:03 +0100] [Client 8] Server address is "/var/run/cups/cups.sock".
D [19/Dec/2017:08:45:03 +0100] [Client 8] Accepted from localhost (Domain)
D [19/Dec/2017:08:45:03 +0100] [Client 8] Waiting for request.
D [19/Dec/2017:08:45:03 +0100] [Client 8] POST / HTTP/1.1
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Dec/2017:08:45:03 +0100] [Client 8] Read: status=200, state=6
D [19/Dec/2017:08:45:03 +0100] [Client 8] No authentication data provided.
D [19/Dec/2017:08:45:03 +0100] [Client 8] 1.1 Cancel-Subscription 8
D [19/Dec/2017:08:45:03 +0100] Cancel-Subscription /
D [19/Dec/2017:08:45:03 +0100] cupsdIsAuthorized: requesting-user-name="root"
D [19/Dec/2017:08:45:03 +0100] cupsdMarkDirty(----S)
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Dec/2017:08:45:03 +0100] [Client 8] Returning IPP successful-ok for Cancel-Subscription (/) from localhost
D [19/Dec/2017:08:45:03 +0100] [Client 8] Content-Length: 75
D [19/Dec/2017:08:45:03 +0100] [Client 8] cupsdSendHeader: code=200, type="application/ipp", auth_type=0
D [19/Dec/2017:08:45:03 +0100] [Client 8] con->http=0x564dd9f32280
D [19/Dec/2017:08:45:03 +0100] [Client 8] cupsdWriteClient error=0, used=0, state=HTTP_STATE_POST_SEND, data_encoding=HTTP_ENCODING_LENGTH, data_remaining=75, response=0x564dd9ea3190(IPP_STATE_DATA), pipe_pid=0, file=-1
D [19/Dec/2017:08:45:03 +0100] [Client 8] Writing IPP response, ipp_state=IPP_STATE_DATA, old wused=0, new wused=0
D [19/Dec/2017:08:45:03 +0100] [Client 8] bytes=0, http_state=0, data_remaining=75
localhost - - [19/Dec/2017:08:45:03 +0100] "POST / HTTP/1.1" 200 152 Cancel-Subscription successful-ok
D [19/Dec/2017:08:45:03 +0100] [Client 8] Flushing write buffer.
D [19/Dec/2017:08:45:03 +0100] [Client 8] New state is HTTP_STATE_WAITING
D [19/Dec/2017:08:45:03 +0100] [Client 8] Waiting for request.
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [19/Dec/2017:08:45:03 +0100] [Client 8] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [19/Dec/2017:08:45:03 +0100] [Client 8] Closing connection.
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
D [19/Dec/2017:08:45:03 +0100] [Client 7] HTTP_STATE_WAITING Closing for error 32 (Broken pipe)
D [19/Dec/2017:08:45:03 +0100] [Client 7] Closing connection.
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [19/Dec/2017:08:45:03 +0100] Scheduler shutting down normally.
D [19/Dec/2017:08:45:03 +0100] cupsdMarkDirty(----S)
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
I [19/Dec/2017:08:45:03 +0100] Saving subscriptions.conf...
D [19/Dec/2017:08:45:03 +0100] cupsdSetBusyState: newbusy="Not busy", busy="Dirty files"
D [19/Dec/2017:08:45:03 +0100] Creating KeepAlive/PID file "/var/cache/cups/org.cups.cupsd".
I [19/Dec/2017:08:45:03 +0100] Saving job.cache...
D [19/Dec/2017:08:45:03 +0100] cupsdStopSelect()
localhost - - [19/Dec/2017:08:45:03 +0100] "POST / HTTP/1.1" 200 349 Create-Printer-Subscriptions successful-ok
localhost - - [19/Dec/2017:08:45:03 +0100] "POST / HTTP/1.1" 200 176 Create-Printer-Subscriptions successful-ok
localhost - - [19/Dec/2017:08:45:34 +0100] "POST /printers/Dell_Color_Laser_1320c HTTP/1.1" 200 398 Print-Job successful-ok
localhost - - [19/Dec/2017:08:45:53 +0100] "GET /admin/log/error_log HTTP/1.1" 401 0 - -
 
   
ylyco Membre non connecté

Rang

Avatar

Inscrit le : 31/12/2014 à 21h51

Messages: 87

Le 19/12/2017 à 20h46
je viens de désinstaller totalement cups (j'ai supprimé tous mes répertoires "cups" un peu partout), puis réinstallé depuis le dvd (option --searchmedia "release") en 2.2.3, puis upgradé en 2.2.6 :
maintenant avec une demande d'impression de page de test j'ai le message d'erreur dans la page web de cups " stopped - filter failed ".

voici une partie du log :

Code TEXT :
 
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiClearVariables called.
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetVariable: SECTION=\"printers\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetVariable: TOTAL=\"2\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetVariable: REMOTE_USER=\"root\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.2.6\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_preserved[0]=\"1\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_printer_name[0]=\"Dell_Color_Laser_1320c\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_printer_uri[0]=\"/printers/Dell_Color_Laser_1320c\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: time_at_completed[0]=\"novalue\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: time_at_creation[0]=\"Tue 19 Dec 2017 08:22:33 PM CET\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: time_at_processing[0]=\"Tue 19 Dec 2017 08:24:17 PM CET\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_id[0]=\"389\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_state[0]=\"6\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_impressions_completed[0]=\"0\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_k_octets[0]=\"1\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_printer_state_message[0]=\"Filter failed\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetVariable: SERVER_NAME=\"localhost\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetVariable: REMOTE_USER=\"root\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetVariable: CUPS_VERSION=\"CUPS v2.2.6\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_preserved[1]=\"1\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_printer_name[1]=\"Dell_Color_Laser_1320c\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_printer_uri[1]=\"/printers/Dell_Color_Laser_1320c\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: time_at_completed[1]=\"novalue\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: time_at_creation[1]=\"Tue 19 Dec 2017 08:28:30 PM CET\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: time_at_processing[1]=\"Tue 19 Dec 2017 08:28:30 PM CET\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_id[1]=\"390\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_state[1]=\"6\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_impressions_completed[1]=\"0\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_k_octets[1]=\"1\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetArray: job_printer_state_message[1]=\"Filter failed\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetVariable: PRINTER_NAME=\"Dell_Color_Laser_1320c\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetVariable: PRINTER_URI_SUPPORTED=\"/printers/Dell_Color_Laser_1320c\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetVariable: THISURL=\"/printers/Dell_Color_Laser_1320c\"
D [19/Dec/2017:20:28:43 +0100] [CGI] cgiSetVariable: SEARCH_DEST=\"Dell_Color_Laser_1320c\"
D [19/Dec/2017:20:28:43 +0100] [Client 15] CGI data ready to be sent.
D [19/Dec/2017:20:28:43 +0100] [Client 15] con->http=0x56373611e650
D [19/Dec/2017:20:28:43 +0100] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=10281, file=18
D [19/Dec/2017:20:28:43 +0100] [Client 15] Waiting for CGI data.
D [19/Dec/2017:20:28:43 +0100] [Client 15] con->http=0x56373611e650
D [19/Dec/2017:20:28:43 +0100] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=10281, file=18
D [19/Dec/2017:20:28:43 +0100] [Client 15] Waiting for CGI data.
D [19/Dec/2017:20:28:43 +0100] [Client 15] CGI data ready to be sent.
D [19/Dec/2017:20:28:43 +0100] [Client 15] con->http=0x56373611e650
D [19/Dec/2017:20:28:43 +0100] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=10281, file=18
D [19/Dec/2017:20:28:43 +0100] [Client 15] Waiting for CGI data.
D [19/Dec/2017:20:28:43 +0100] [Client 15] con->http=0x56373611e650
D [19/Dec/2017:20:28:43 +0100] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=10281, file=18
D [19/Dec/2017:20:28:43 +0100] [Client 15] Waiting for CGI data.
D [19/Dec/2017:20:28:43 +0100] [Client 15] CGI data ready to be sent.
D [19/Dec/2017:20:28:43 +0100] [Client 15] con->http=0x56373611e650
D [19/Dec/2017:20:28:43 +0100] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=10281, file=18
D [19/Dec/2017:20:28:43 +0100] [Client 15] Waiting for CGI data.
D [19/Dec/2017:20:28:43 +0100] [Client 15] con->http=0x56373611e650
D [19/Dec/2017:20:28:43 +0100] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=10281, file=18
D [19/Dec/2017:20:28:43 +0100] [Client 15] Waiting for CGI data.
D [19/Dec/2017:20:28:43 +0100] [Client 15] CGI data ready to be sent.
D [19/Dec/2017:20:28:43 +0100] [Client 15] con->http=0x56373611e650
D [19/Dec/2017:20:28:43 +0100] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=10281, file=18
D [19/Dec/2017:20:28:43 +0100] [Client 15] Waiting for CGI data.
D [19/Dec/2017:20:28:43 +0100] [Client 15] con->http=0x56373611e650
D [19/Dec/2017:20:28:43 +0100] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=10281, file=18
D [19/Dec/2017:20:28:43 +0100] [Client 15] Waiting for CGI data.
D [19/Dec/2017:20:28:43 +0100] [Client 15] CGI data ready to be sent.
D [19/Dec/2017:20:28:43 +0100] [Client 15] con->http=0x56373611e650
D [19/Dec/2017:20:28:43 +0100] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=10281, file=18
D [19/Dec/2017:20:28:43 +0100] [Client 15] Waiting for CGI data.
D [19/Dec/2017:20:28:43 +0100] [Client 15] con->http=0x56373611e650
D [19/Dec/2017:20:28:43 +0100] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=10281, file=18
D [19/Dec/2017:20:28:43 +0100] [Client 15] Waiting for CGI data.
D [19/Dec/2017:20:28:43 +0100] [Client 16] HTTP_STATE_WAITING Closing for error 32 (Relais brisé (pipe))
D [19/Dec/2017:20:28:43 +0100] [Client 16] Closing connection.
D [19/Dec/2017:20:28:43 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
D [19/Dec/2017:20:28:43 +0100] [Client 15] CGI data ready to be sent.
D [19/Dec/2017:20:28:43 +0100] PID 10281 (/usr/lib/cups/cgi-bin/printers.cgi) exited with no errors.
D [19/Dec/2017:20:28:43 +0100] [Client 15] con->http=0x56373611e650
D [19/Dec/2017:20:28:43 +0100] [Client 15] cupsdWriteClient error=0, used=0, state=HTTP_STATE_GET_SEND, data_encoding=HTTP_ENCODING_CHUNKED, data_remaining=0, response=(nil)(), pipe_pid=10281, file=18
D [19/Dec/2017:20:28:43 +0100] [Client 15] Waiting for CGI data.
D [19/Dec/2017:20:28:43 +0100] [Client 15] Sending 0-length chunk.
D [19/Dec/2017:20:28:43 +0100] [Client 15] Flushing write buffer.
D [19/Dec/2017:20:28:43 +0100] [Client 15] New state is HTTP_STATE_WAITING
D [19/Dec/2017:20:28:43 +0100] [Client 15] Waiting for request.
D [19/Dec/2017:20:28:43 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
D [19/Dec/2017:20:28:43 +0100] [Client 15] GET /cups.css HTTP/1.1
D [19/Dec/2017:20:28:43 +0100] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
D [19/Dec/2017:20:28:43 +0100] [Client 15] Read: status=200, state=3
D [19/Dec/2017:20:28:43 +0100] [Client 15] Authorized as "root" using Basic.
D [19/Dec/2017:20:28:43 +0100] [Client 15] Processing GET /cups.css
D [19/Dec/2017:20:28:43 +0100] [Client 15] filename="/usr/share/cups/www/cups.css", type=text/css
D [19/Dec/2017:20:28:43 +0100] [Client 15] cupsdSendHeader: code=304, type="(null)", auth_type=0
D [19/Dec/2017:20:28:43 +0100] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
I [19/Dec/2017:20:28:44 +0100] Expiring subscriptions...
I [19/Dec/2017:20:28:45 +0100] Expiring subscriptions...
I [19/Dec/2017:20:28:46 +0100] Expiring subscriptions...
I [19/Dec/2017:20:28:47 +0100] Expiring subscriptions...
I [19/Dec/2017:20:28:48 +0100] Expiring subscriptions...
 


j'ai regardé un peu sur le web et trouvé cette page (pour le moment) :
https://bugs.mageia.org/show_bug.cgi?id=21424

Citation :

James Kerr 2017-08-02 16:48:08 CEST

I note that in Mageia 6 we have cups-filters-1.13.4 but in cauldron we have cups-filters-1.14.1. Perhaps that's a pointer to the source of the problem.


Puis, en fin de page :

Citation :

Rémi Verschelde 2017-08-07 13:49:34 CEST

Awesome! Now let's do the same fix for bug 21444 in Mageia 6.


Donc il faudrait attendre un correctif si je comprends bien ?
   
Papoteur Membre non connecté

Rang

Avatar

Modérateur Équipe Mageia

Inscrit le : 03/10/2011 à 22h16

Localisation : Metz

Messages: 8019

Le 20/12/2017 à 19h48
Bonjour,
Non, le correctif est là de puis l'été, avec :
cups-filters-1.13.4-2.1.mga6
lib(64)cups-filters1-1.13.4-2.1.mga6
lib(64)cups-filters-devel-1.13.4-2.1.mga6


Yves
   
ylyco Membre non connecté

Rang

Avatar

Inscrit le : 31/12/2014 à 21h51

Messages: 87

Le 20/12/2017 à 20h49
Merci encore Papoteur.

De mon côté j'avance aussi :

- j'ai aussi essayé mon imprimante sur une distribution "Linux Mint", et j'avais le même probleme de "Filter Failed". J'ai trouvé un post sur un forum indiquant d'installer un paquet "ia32-libs" (car mon driver d'imprimante était pour du 32 bits) : et ça fonctionne maintenant sous Mint.

- ce paquet n'est pas présent tel quel dans Mageia : quel est son "équivalent" ? Est-ce que c'est bien "lsb-core-lib" ? ou "lsb-lib" ? ou un autre paquet ? (avant de mettre encore n'importe quel paquet qui ne serait pas nécessaire)

Remarque :
si c'est ça qui bloque mes impressions, c'est récent : encore en Cups 2.4.4, je n'avais pas de soucis de compatibilité système 64 bits / driver 32 bits (il me semble).
   
ylyco Membre non connecté

Rang

Avatar

Inscrit le : 31/12/2014 à 21h51

Messages: 87

Le 21/12/2017 à 23h30
Correction de mon dernier post :
mon imprimante arrive à imprimer sous Mint, qui est en version 2.1.3 de Cups...

J'ai bien essayé sous Mageia et Cups 2.2.6 d'installer "lsb-lib" (qui contient lsb-core-lib), et libcups-filters1 en i586, résultat dans Cups :
- je demande la page "print test page" : rien ne se passe.
- je demande la page "print self test page" : l'imprimante sort de veille, mais n'imprime rien non plus.

Je n'ai plus d'erreur "filter failed" cependant.

Je vais continuer à chercher...
(repartir sous cups 2.2.3 depuis le dvd d'installation sûrement, et remettre tout à plat)
Edité par ylyco Le 21/12/2017 à 23h32
   
Papoteur Membre non connecté

Rang

Avatar

Modérateur Équipe Mageia

Inscrit le : 03/10/2011 à 22h16

Localisation : Metz

Messages: 8019

Le 22/12/2017 à 12h43
Je suis surpris qu'il y ait besoin de bibliothèques 32 bits. Il me semblait que les PPD était des fichiers de configuration écrit avec un éditeur de texte, donc indifférents à l'architecture du système.
Ce mélange est à proscrire. Il n'est nécessaire que pour des logiciels fournis en exécutable. On y trouve google earth, playonlinux, skype (plus maintenant). Mais pas cups.


Yves
   
Répondre
Vous n'êtes pas autorisé à écrire dans cette catégorie