Forum

[lgendronneau@localhost ~]$ hp-check
Saving output in log file: /home/lgendronneau/hp-check.log
 
HP Linux Imaging and Printing System (ver. 3.13.9)
Dependency/Version Check Utility ver. 15.1
 
Copyright (c) 2001-13 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
 
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.     
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper dependencies installed to successfully   
run.                                                                                                                                                                                                               
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases (both compile- and run-time dependencies).                                                         
 
Check types:                                                                                                                                                                                                       
a. EXTERNALDEP - External Dependencies                                                                                                                                                                             
b. GENERALDEP - General Dependencies (required both at compile and run time)                                                                                                                                       
c. COMPILEDEP - Compile time Dependencies                                                                                                                                                                          
d. [All are run-time checks]                                                                                                                                                                                       
PYEXT SCANCONF QUEUES PERMISSION                                                                                                                                                                                   
 
Status Types:
    OK
    MISSING       - Missing Dependency or Permission or Plug-in
    INCOMPAT      - Incompatible dependency-version or Plugin-version
 
warning: mageia distro is not found in AUTH_TYPES
|Gtk-Message: Failed to load module "canberra-gtk-module"
warning: unknown-0.0 version is not supported. Using unknown-0 versions dependencies to verify and install...
 
---------------
| SYSTEM INFO |
---------------
 
 Kernel: 3.14.32-desktop-1.mga4 #1 SMP Sat Feb 7 00:41:35 UTC 2015 GNU/Linux
 Host: localhost
 Proc: 3.14.32-desktop-1.mga4 #1 SMP Sat Feb 7 00:41:35 UTC 2015 GNU/Linux
 Distribution: unknown 0.0
 Bitness: 64 bit
 
 
-----------------------
| HPLIP CONFIGURATION |
-----------------------
 
HPLIP-Version: HPLIP 3.13.9
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for unknown distro  0.0 version 
 
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf.  Generated from hplip.conf.in by configure.
 
[hplip]
version=3.13.9
 
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.13.9
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
 
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=yes
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=yes
internal-tag=3.13.9
restricted-build=no
ui-toolkit=qt4
qt3=no
qt4=yes
policy-kit=yes
lite-build=no
udev-acl-rules=yes
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
 
 
Current contents of '/var/lib/hp/hplip.state' file:
 
 
Current contents of '~/.hplip/hplip.conf' file:
[settings]
systray_visible = 0
systray_messages = 0
 
[last_used]
device_uri = 
printer_name = 
working_dir = .
 
[commands]
scan = "/usr/bin/xscanimage "
 
[refresh]
rate = 30
enable = false
type = 1
 
[polling]
enable = false
interval = 5
device_list = 
 
[fax]
voice_phone = 
email_address = 
 
[upgrade]
notify_upgrade = true
last_upgraded_time = 1426019624.69558
pending_upgrade_time = 0
 
[installation]
date_time = 12/03/2015 22:07:42
version = 3.13.9
 
 
 <Package-name>        <Package-Desc>      <Required/Optional> <Min-Version> <Installed-Version> <Status>   <Comment>
 
--------------------------
|  External Dependencies |
--------------------------
 
 policykit            Admin-Policy-framework    OPTIONAL        -               0.112           OK         -
 gs                   Ghostscript               REQUIRED        7.05            9.10            OK         -
 network              Network-wget              OPTIONAL        -               1.14            OK         -
 scanimage            Shell-Scanning            OPTIONAL        1.0             1.0.24          OK         -
 avahi-utils          avahi-utils               OPTIONAL        -               0.6.31          OK         -
 error: dbus          DBus                      REQUIRED        -               1.6.18          MISSING    'DBUS may not be installed or not running'
 error: cups          CUPS                      REQUIRED        1.1             -               INCOMPAT   'CUPS may not be installed or not running'
 error: xsane         SANE-GUI                  OPTIONAL        0.9             -               MISSING    'xsane needs to be installed'
 
-------------------------
|  General Dependencies |
-------------------------
 
 reportlab            Python-PDF-Lib            OPTIONAL        2.0             2.7             OK         -
 error: libcrypto     OpenSSL-Crypto-Lib        REQUIRED        -               1.0.1           MISSING    'libcrypto needs to be installed'
 pil                  Python-Image-Lib          OPTIONAL        -               1.1.7           OK         -
 pyqt4-dbus           PyQt4-DBUS                REQUIRED        4.0             4.10.3          OK         -
 error: libjpeg       JPEG-Lib                  REQUIRED        -               -               MISSING    'libjpeg needs to be installed'
 libpthread           POSIX-Threads-Lib         REQUIRED        -               2.18            OK         -
 python-dbus          Python-DBUS               REQUIRED        0.80.0          1.2.0           OK         -
 error: python-devel  Python-SDK                REQUIRED        2.2             2.7.9           MISSING    'python-devel needs to be installed'
 pyqt4                Python-Qt4                REQUIRED        4.0             4.10.3          OK         -
 error: cups-devel    CUPS-SDK                  REQUIRED        -               -               MISSING    'cups-devel needs to be installed'
 error: sane-devel    SANE-SDK                  REQUIRED        -               -               MISSING    'sane-devel needs to be installed'
 error: libusb        USB-Lib                   REQUIRED        -               1.0             MISSING    'libusb needs to be installed'
 sane                 Scan-Lib                  REQUIRED        -               -               OK         -
 error: cups-image    CUPS-Image-Lib            REQUIRED        -               -               MISSING    'cups-image needs to be installed'
 error: libnetsnmp-devel SNMP-Networking-SDK       REQUIRED        5.0.9           -               MISSING    'libnetsnmp-devel needs to be installed'
 python-xml           Python-XML-Lib            REQUIRED        -               2.1.0           OK         -
 python-notify        Desktop-notifications     OPTIONAL        -               -               OK         -
 
------------------------------
|  Compile Time Dependencies |
------------------------------
 
 error: gcc           gcc-Compiler              REQUIRED        -               4.8.2           MISSING    'gcc needs to be installed'
 error: libtool       Build-tools               REQUIRED        -               -               MISSING    'libtool needs to be installed'
 make                 GNU-Build-tools           REQUIRED        3.0             4.0             OK         -
 
----------------------
|  Python Extentions |
----------------------
 
 cupsext              CUPS-Extension            REQUIRED        -               3.13.9          OK         -
 pcardext             PhotoCard-Extension       REQUIRED        -               3.13.9          OK         -
 hpmudext             IO-Extension              REQUIRED        -               3.13.9          OK         -
 
-----------------------
|  Scan Configuration |
-----------------------
 
 hpaio                HPLIP-SANE-Backend        REQUIRED        -               3.13.9          OK         'hpaio found in /etc/sane.d/dll.conf'
 scanext              Scan-SANE-Extension       REQUIRED        -               3.13.9          OK         -
 
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
 
device `hpaio:/usb/PSC_1500_series?serial=MY68FC21VV04GG' is a Hewlett-Packard PSC_1500_series all-in-one
 
 
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
 
  Device URI                                     Model                                     
  ---------------------------------------------  ------------------------------------------
  hp:/usb/PSC_1500_series?serial=MY68FC21VV04GG  HP PSC 1500 series                        
 
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
 
 
HP-PSC-1510
-----------
Type: Unknown
Device URI: serial:/dev/ttyS0?baud=115200
PPD: /etc/cups/ppd/HP-PSC-1510.ppd
PPD Description: HP PSC 1510 Series, hpcups 3.13.9
Printer status: printer HP-PSC-1510 is idle.  enabled since dim. 08 mars 2015 19:04:34 CET
warning: Printer is not HPLIP installed. Printers must use the hp: or hpfax: CUPS backend for HP-Devices.
 
 
--------------
| PERMISSION |
--------------
 
error: groups   user-groups                    Required        -        -        MISSING  lp
USB             None                           Required        -        -        OK       Node:'/dev/bus/usb/005/002' Perm:'  root  scanner rw- rw- rw- rw- rw- r--'
 
-----------
| SUMMARY |
-----------
 
Missing Required Dependencies
-----------------------------
None
 
Missing Optional Dependencies
-----------------------------
None
 
 
USER GROUPS
-----------
error: lp groups need to be added for lgendronneau user
 
Total Errors: 14
Total Warnings: 1
 
Run 'hp-doctor' command to prompt and fix the issues. 
 
Done.